Denon AVR 3802 Operating Instructions Manual

Kategori
AV-mottagare
Typ
Operating Instructions Manual
AV SURROUND RECEIVER
AVR-3802
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
ISTRUZIONI PER L’USO
INSTRUCCIONES DE OPERACION
GEBRUIKSAANWIJZING
BRUKSANVISNING
ON / STANDBY
¢
OFF£
AVR-3802
PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER
OUTPUT
SIGNAL
DETECT
SURROUND
BACK CH
TUNING
PRESET
REC /
MULTI
6.1 / 7.1
SURROUND
SOURCE
ON / STANDBY
REMOTE
SENSOR
FUNCTION
SURROUND
SPEAKER
A
B
AUTO
PCM
DTS
SIGNAL
DIGITAL
INPUT
VOLUME LEVEL
MASTER VOLUME
SURROUND
MODE
SURROUND
PARAMETER
TONE
CONTROL
SELECT CH VOL
DIMMER
STATUS TONE DEFEAT
VIDEO SELECT
INPUT
EXT. IN
ANALOG
AUTO PCM DTS
PHONES
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1 VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
PTY RTRDS
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
FOR ENGLISH READERS PAGE 112 ~ PAGE 142
FÜR DEUTSCHE LESER SEITE 143 ~ SEITE 182
POUR LES LECTEURS FRANCAIS PAGE 183 ~ PAGE 122
PER IL LETTORE ITALIANO PAGINA 123 ~ PAGINA 162
PARA LECTORES DE ESPAÑOL PAGINA 163 ~ PAGINA 202
VOOR NEDERLANDSTALIGE LEZERS PAGINA 203 ~ PAGINA 242
FOR SVENSKA LÄSARE SIDA 243 ~ SIDA 282
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product, to which this declaration relates, is in conformity
with the following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and
EN61000-3-3.
Following the provisions of 73/23/EEC, 89/336/EEC and
93/68/EEC Directive.
ÜBEREINSTIMMUNGSERKLÄRUNG
Wir erklären unter unserer Verantwortung, daß dieses
Produkt, auf das sich diese Erklärung bezieht, den
folgenden Standards entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und
EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC,
89/336/EEC und 93/68/EEC.
DECLARATION DE CONFORMITE
Nous déclarons sous notre seule responsabilité que
l’appareil, auquel se réfère cette déclaration, est
conforme aux standards suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et
EN61000-3-3.
D’après les dispositions de la Directive 73/23/EEC,
89/336/EEC et 93/68/EEC.
DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo
prodotto, al quale la nostra dichiarazione si riferisce, è
conforme alle seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-
3-3.
In conformità con le condizioni delle direttive 73/23/EEC,
89/336/EEC e 93/68/EEC.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que
este producto al que hace referencia esta declaración,
está conforme con los siguientes estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y EN61000-
3-3.
Siguiendo las provisiones de las Directivas 73/23/EEC,
89/336/EEC y 93/68/EEC.
EENVORMIGHEIDSVERKLARING
Wij verklaren uitsluitend op onze verantwoordelijkheid
dat dit produkt, waarop deze verklaring betrekking heeft,
in overeenstemming is met de volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en
EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 73/23/EEC,
89/336/EEC en 93/68/EEC.
ÖVERENSSTÄMMELSESINTYG
Härmed intygas helt på eget ansvar att denna produkt,
vilken detta intyg avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och
EN61000-3-3.
Enligt stadgarna i direktiv 73/23/EEC, 89/336/EEC och
93/68/EEC.
NOTE ON USE / HINWEISE ZUM GEBRAUCH /
OBSERVATIONS RELATIVES A LUTILISATION / NOTE SULLUSO
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
Vermeiden Sie hohe Temperaturen.
Beachten Sie, daß eine ausreichend
Luftzirkulation gewährleistet wird, wenn das
Gerät auf ein Regal gestellt wird.
Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une
étagère.
Evitate di esporre l’unità a temperature alte.
Assicuratevi che ci sia un’adeguata
dispersione del calore quando installate
l’unità in un mobile per componenti audio.
Evite altas temperaturas
Permite la suficiente dispersión del calor
cuando está instalado en la consola.
Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het
apparaat op een rek wordt geplaatst.
Undvik höga temperaturer.
Se till att det finns möjlighet till god
värmeavledning vid montering i ett rack.
Keep the set free from moisture, water, and
dust.
Halten Sie das Gerät von Feuchtigkeit,
Wasser und Staub fern.
Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
Tenete l’unità lontana dall’umidità, dall’acqua
e dalla polvere.
Mantenga el equipo libre de humedad, agua
y polvo.
Laat geen vochtigheid, water of stof in het
apparaat binnendringen.
• Utsätt inte apparaten för fukt, vatten och
damm.
Do not let foreign objects in the set.
Keine fremden Gegenstände in das Gerät
kommen lassen.
• Ne pas laisser des objets étrangers dans
l’appareil.
E’ importante che nessun oggetto è inserito
all’interno dell’unità.
No deje objetos extraños dentro del equipo.
Laat geen vreemde voorwerpen in dit
apparaat vallen.
Se till att främmande föremål inte tränger in i
apparaten.
Handle the power cord carefully.
Hold the plug when unplugging the cord.
Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie
den Stecker herausziehen.
Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
Manneggiate il filo di alimentazione con cura.
Agite per la spina quando scollegate il cavo
dalla presa.
Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el
cordón de energía.
Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer
deze moet worden aan- of losgekoppeld.
Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
Unplug the power cord when not using the
set for long periods of time.
• Wenn das Gerät eine längere Zeit nicht
verwendet werden soll, trennen Sie das
Netzkabel vom Netzstecker.
Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de
longues périodes.
Disinnestate il filo di alimentazione quando
avete l’intenzione di non usare il filo di
alimentazione per un lungo periodo di tempo.
Desconecte el cordón de energía cuando no
utilice el equipo por mucho tiempo.
Neem altijd het netsnoer uit het stopkontakt
wanneer het apparaat gedurende een lange
periode niet wordt gebruikt.
Koppla ur nätkabeln om apparaten inte
kommer att användas i lång tid.
Do not let insecticides, benzene, and thinner
come in contact with the set.
Lassen Sie das Gerät nicht mit Insektiziden,
Benzin oder Verdünnungsmitteln in
Berührung kommen.
Ne pas mettre en contact des insecticides,
du benzène et un diluant avec l’appareil.
Assicuratevvi che l’unità non venga in
contatto con insetticidi, benzolo o solventi.
No permita el contacto de insecticidas,
gasolina y diluyentes con el equipo.
• Laat geen insektenverdelgende middelen,
benzine of verfverdunner met dit apparaat in
kontakt komen.
Se till att inte insektsmedel på spraybruk,
bensen och thinner kommer i kontakt med
apparatens hölje.
Never disassemble or modify the set in any
way.
Versuchen Sie niemals das Gerät
auseinander zu nehmen oder auf jegliche Art
zu verändern.
Ne jamais démonter ou modifier l’appareil
d’une manière ou d’une autre.
Non smontate mai, nè modificate l’unità in
nessun modo.
Nunca desarme o modifique el equipo de
ninguna manera.
Nooit dit apparaat demonteren of op andere
wijze modifiëren.
Ta inte isär apparaten och försök inte bygga
om den.
Do not obstruct the ventilation holes.
Die Belüftungsöffnungen dürfen nicht
verdeckt werden.
Ne pas obstruer les trous d’aération.
Non coprite i fori di ventilazione.
No obstruya los orificios de ventilación.
De ventilatieopeningen mogen niet worden
beblokkeerd.
Täpp inte till ventilationsöppningarna.
* (For sets with ventilation holes)
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
8
ENGLISH
Connections
When making connections, also refer to the operating instructions of the other components.
(
L
) (
R
)
(
L
) (
R
) (
L
) (
R
)
(
L
) (
R
)
Connection jack for
subwoofer with built-in
amplifier (super woofer),
etc.
SURROUND SPEAKER
SYSTEMS (A)
CENTER SPEAKER
SYSTEM
FRONT SPEAKER
SYSTEMS
Precautions when
connecting speakers
If a speaker is placed near
a TV or video monitor, the
colors on the screen may
be disturbed by the
speakers magnetism. If
this should happen, move
the speaker away to a
position where it does not
have this effect.
SURROUND SPEAKER
SYSTEMS (B)
SURROUND BACK/MULTI ZONE
SPEAKER SYSTEMS
NOTES:
To use Surround back with one
speaker, connect the speaker to
SURR. BACK L CH.
The settings must be changed to
use this speaker for MULTI
ZONE.
See page 10.
AVR-3802
PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER
OUTPUT
SIGNAL
DETECT
SURROUND
BACK CH
TUNING
PRESET
REC /
MULTI
6.1 / 7.1
SURROUND
SOURCE
ON / STANDBY
REMOTE
SENSOR
FUNCTION
SURROUND
SPEAKER
A
B
AUTO
PCM
DTS
SIGNAL
DIGITAL
INPUT
VOLUME LEVEL
MASTER VOLUME
SURROUND
MODE
SURROUND
PARAMETER
TONE
CONTROL
SELECT CH VOL
DIMMER
STATUS TONE DEFEAT
VIDEO SELECT
INPUT
EXT. IN
ANALOG
AUTO PCM DTS
PHONES
ON / STANDBY
OFF
£
¢
!8
!9@0@1@2@3@4@5@6@7@8@9
q w ter y u i o
!0 !1 !2 !3 !4 !5 !6 !7
Front Panel
6
PART NAMES AND FUNCTIONS
For details on the functions of these parts, refer to the pages given in parentheses ( ).
q
Power operation switch .................................(22)
w
Headphones jack (PHONES) ..........................(24)
e
6.1/7.1 SURROUND button............................(29)
r
Surround speaker system indicators
(SURROUND SPEAKER A/B)
t
AUTO button ..................................................(23)
y
PCM button....................................................(23)
u
DTS button .....................................................(23)
i
ANALOG button .............................................(23)
o
EXT. IN button ................................................(23)
!0
VIDEO SELECT button ...................................(25)
!1
DIMMER button.............................................(25)
!2
STATUS button ...............................................(25)
!3
TONE DEFEAT button ....................................(24)
!4
SURROUND MODE button............................(23)
!5
SURROUND PARAMETER button .................(28)
!6
SELECT knob..................................................(23)
!7
TONE CONTROL button ................................(24)
!8
CH VOL button...............................................(27)
!9
MASTER VOLUME control ............................(23)
@0
Master volume indicator (VOLUME LEVEL) ..(23)
@1
Display
@2
INPUT mode indicators ..................................(23)
@3
SIGNAL indicators ..........................................(23)
@4
Remote control sensor
(REMOTE SENSOR).......................................(16)
@5
Power indicator ..............................................(22)
@6
FUNCTION knob.............................................(23)
@7
TUNING PRESET button ................................(34)
@8
SOURCE selector button ...............................(23)
@9
REC/MULTI button .........................................(25)
9
ENGLISH
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
Remote control unit
For details on the functions of these parts, refer to the pages given in parentheses ( ).
SYSTEM CALL buttons................(19)
Input mode selector buttons .......(23)
Surround mode buttons...............(30)
TEST TONE / RDS button ............(27)
Speaker selector / PTY button .....(30)
System buttons............................(33)
ENTER/system button .................(10)
Tuner system/
system button..............................(10)
System setup/
system button..............................(10)
DISPLAY/SURR. PARA
button...........................................(28)
Master volume control
buttons.........................................(23)
Mode selector buttons ................(17)
Power button ...............................(22)
MENU/OSD button ......................(25)
RETURN/MEMORY/system
button...........................................(33)
MUTING button ...........................(24)
Input source selector
buttons.........................................(23)
OUTPUT / RT button....................(24)
BACKLIGHT button
Remote control signal
transmitter ...................................(16)
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
PH
O
N
O
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
7
SETTING UP THE SYSTEM
Once all connections with other AV components have been completed as described in CONNECTIONS
(see pages 4 to 8), make the various settings described below on the monitor screen using the AVR-3802s
on-screen display function.
These settings are required to set up the listening rooms AV system centered around the AVR-3802.
Use the following buttons to set up the system:
SYSTEM SETUP button
Press this to display the system setup menu.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons
F and G: Use these to move the cursors (F and G) to
the left and right on the screen.
D and H: Use these to move the cursors (D and H) to
the up and down on the screen.
System setup items and default values (set upon shipment from the factory)
System setup Default settings
w
e
t
y
i
Speaker
Configuration
(Surround
Speaker
Setting)
(Subwoofer
mode)
SB CH Auto
Flag Detect
Channel Level
Digital In
Assignment
On Screen
Display
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for
full-size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
Use this function when using multiple surround
speaker combinations for more ideal surround
sound. Once the combinations of surround
speakers to be used for the different surround
modes are preset, the surround speakers are
selected automatically according to the surround
mode.
This selects the subwoofer speaker for playing deep bass
signals.
Set the method of playing the surround backchannel for digital
signals.
This adjusts the volume of the signals output from the speakers
and subwoofer for the different channels in order to obtain
optimum effects.
This assigns the digital input jacks for the different
input sources.
This sets whether or not to display the on-screen display that
appears on the monitor screen when the controls on the remote
control unit or main unit are operated.
Surround
mode
Surround
speaker
Input
source
Digital
Inputs
Front Sp.
Large
Center Sp. Surround Sp. A /BSub Woofer
Small SmallYes
DOLBY/
DTS
SURROUND
5CH/7CH
STEREO
DSP
SIMULATION
EXT. IN
——
AAAA——
LFE
Front L & R Center Surround L & RSub Woofer
3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)3.6 m (12 ft)
Front L
Front R Center
Surround
R
Surround
Back R
Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CD DVD TV/DBS
CDR
/TAPE
VDP
COAXIAL
OPTICAL
1
OPTICAL
2
OPTICAL
3
OFF
On Screen Display = ON
Surround Back Sp.
Small / 2spkrs
DTS-ES / 6.1 Source Auto Flag Detect Mode = OFF
r
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
SBL & SBR
3.0 m (10 ft)
u
This sets the output level for the multi output jacks. 0 dB
Surround
Back L
0 dB
Surround
L
0 dB
Multi vol. Level
VCR-2
OFF
VCR-1
OFF
Power AMP
Assignment
Set this to switch the surround back channels power amplifier
for use for multi-zone.
Surround Back
q
A1 ~ A8 87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz
B1 ~ B8 522 / 603 / 999 / 1404 / 1611 kHz, 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
o
Auto Tuner
Preset
FM stations are received automatically and stored in the
memory.
Crossover
Frequency
Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
80 Hz
17
ENGLISH
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
Operating DENON audio components
1
Use the mode selector buttons to select the component you want
to operate.
The mode switches between AMP, TUNER and MULTI
each time the RECEIVER button is pressed, between CDR,
MD and TAPE each time the CDR/MD/TAPE button is
pressed, between DBS and CABLE each time the
DBS/CABLE button is pressed, and between DVD and DVD
SETUP each time the DVD button is pressed, and between
VCR and VCR2 eachtime the VCR button is pressed.
2
Operate the audio component.
For details, refer to the components operating instructions.
It may not be possible to operate some models.
1. CD player (CD) system buttons 2. Tape deck (TAPE) system buttons
1
2
3
456
789
+10
0
TV/
VCR
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
VDP
VCR-1 VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
RETURN
SETUP
SHIFT
A/B
MUTING
BAND MODE
TUNING
TUNING
1
2
3
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
C/
PHONO
CD
RETURN
SETUP
SHIFT
A/B
MUTING
BAND MODE
TUNING
TUNING
6, 7 : Manual search (forward and reverse)
2 :Stop
1 : Play
8, 9 : Auto search (to beginning of track)
3 : Pause
SKIP +, : (for CD changers only)
0~9, +10 : 10 key
6 : Rewind
7 : Fast forward
2 :Stop
1 : Forward play
3 : Pause
8 : Reverse play
A/B : Switch between sides A and B
3. MD recorder (MD), CD recorder (CDR) system
buttons
1
2
3
456
789
+10
0
TV/
VCR
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
VDP
VCR-1 VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
RETURN
SETUP
SHIFT
A/B
MUTING
BAND MODE
TUNING
TUNING
6, 7 : Manual search (forward and reverse)
2 :Stop
1 : Play
8, 9 : Auto search (to beginning of track)
3 : Pause
0~9, +10 : 10 key
4. Tuner system buttons
89
+10
0
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
+
VCR-1
PTY RT
VCR-2/ V.AUX
TV/DBS
OUTPUT
SPEAKER
RETURN
SETUP
A/B
BAND MODE
TUNING
TUNING
7
TV/
VCR
RDS
TEST
TONE
1
2
3
456
SKIP
-
-
TUNER
VDP DVDCDR/TAPE
PHONO
CD
SHIFT
MUTING
TUNING D, H : Tuning up/down
BAND : Switch between AM and FM bands
MODE : Switch between AUTO and MONO
MEMORY : Preset memory
SHIFT : Switch preset channel range
CHANNEL +, : Preset channel up/down
1~8 : 10 key
RDS : RDS search
PTY : PTY search
RT : Radio Text
By using the preset memory, the included remote control unit can be used to control other makes of video
equipment. Note that this is not possible for some models, however. In such cases, use the learning function
(see page 19) to store the remote control signals in the remote control units memory.
See page 20 for instructions on resetting the data stored in the preset memory.
Preset memory
1
Press the power ON/SOURCE button and the
OFF button at the same time.
•“SET UP appears on the remote control
units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
ENTER CODE on the remote control unit,
then press the ENTER button.
The remote control units display switches
as follows each time the D and H cursor
buttons are pressed.
ENTER CODE
CODE NO
LEARN
SYS CALL
RESET
AUTO SEARCH
BAND MODE
TUNING
TUNING
ENTER
SHIFT
4
After SEL MODE is displayed, the last
selected mode is set. Use the D and H cursor
buttons to display the component whose codes
you want to store in the memory, then press
the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
The display switches as shown below each
time the D and H cursor buttons are
pressed.
TV CD MD TAPE VCR
DVD VDP CABLE DBS VCR2
NOTES:
The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidental
operation, cover the remote control units transmitting window while setting the preset memory.
Depending on the model and year of manufacture, this function cannot be used for some models, even if
they are of makes listed on the included list of preset codes.
Some manufacturers use more than one type of remote control code. Refer to the included list of preset
codes to change the number and check.
5
Referring to the included List
of Preset Codes, use the
number buttons to input the
preset code (a 4-digit
number) for the manufacturer
of the component whose
signals you want to store in
the memory.
1
2
3
456
789
0
6
OK is displayed when the signals are
registered and the mode is terminated.
7
To store the codes of another component in the
memory, repeat steps 1 to 6.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
5
3, 4
2, 3, 4
18
ENGLISH
Checking the preset memory settings
1
Press the power ON/SOURCE button and the
OFF button at the same time.
•“SET UP appears on the remote control
units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
CODE NO on the remote control unit, then
press the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
4
Press the D and H cursor
buttons to display the registered
preset memory on the remote
control units display and check.
BAND MODE
TUNING
TUNING
5
Press the ENTER button to
terminate.
ENTER
SHIFT
Operating a component stored in the preset memory
1
Press the mode selector button for the
component you want to operate.
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
NOTE:
For the DVD player remote control buttons,
function names may differ depending on the
make. Compare with the remote control
operation of the various components.
The preset codes are as follows upon shipment from the factory and after resetting:
TV, VCR......................................................................HITACHI
CD, MD, TAPE, CDR, VDP, DVD, DVD SETUP .........DENON
DBS ...........................................................................GENERAL INSTRUMENT
CABLE .......................................................................JERROLD
2
Operate the component.
For details, refer to the components operating instructions.
Some models cannot be operated with this remote control unit.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1. Digital video disc player
(DVD, DVD SETUP) system
buttons
POWER : Power on/standby
(ON/SOURCE)
6,7 : Manual search
(forward and reverse)
2 :Stop
1 : Play
8,9 : Auto search
(to beginning of track)
3 : Pause
0 ~ 9, +10 : 10 key
skip +, : Disc skip
(for DVD changer only)
DISPLAY : Display
MENU : Menu
RETURN : Return
SETUP : Setup
2. Video disc player (VDP)
system buttons
POWER : Power on/standby
(ON/SOURCE)
6,7 : Manual search
(forward and reverse)
2 :Stop
1 : Play
8,9 : Auto search (cue)
3 : Pause
0~9, +10 : 10 key
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
3. Video deck (VCR/VCR-2)
system buttons
POWER : Power on/standby
(ON/SOURCE)
6,7 : Manual search
(forward and reverse)
2 :Stop
1 : Play
3 : Pause
Channel +, : Channels
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4. Monitor TV (TV), digital
broadcast satellite (DBS)
tuner and cable (CABLE)
system buttons
POWER : Power on/standby
(ON/SOURCE)
SETUP : Setup
RETURN : Menu
D, H, F, G : Cursor up, down,
left and right
ENTER : Enter
CHANNEL : Switch channels
+,
0~9, +10 : Channels
TV/VCR : Switch between TV
and video player
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
19
ENGLISH
If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be
controlled with the included remote control unit by storing its remote control signals in the remote control unit.
Learning function
1
Press the power ON/SOURCE button and the
OFF button simultaneously.
•“SET UP appears on the remote control
units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
LEARN on the remote control units display,
then press the ENTER button.
•“SEL MODE is displayed.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1, 5, 8
3, 4
2, 3, 4
BAND MODE
TUNING
TUNING
ENTER
SHIFT
4
Use the D and H cursor buttons to select the
mode for the button to be learned, then press
the ENTER button.
•“SELECT KEY is displayed.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
5
Press the button to be learned while
SELECT KEY is displayed. NOW LEARN
appears.
•“NOT VALID is displayed if a button that
cannot be learned is pressed.
To cancel, press the power ON/SOURCE
button and the OFF button simultaneously.
OFF
ON /
SOURCE
6
Point the remote control units directly at each
other and press and hold in the button on the
other remote control unit which you want to
learn.
Other remote
control unit
7
COMPLETE appears on the remote control
units display and learning is completed.
•“SELECT KEY is displayed. Other keys can
be learned by repeating steps 5 to 7.
8
To cancel the learning mode, press the power
ON/SOURCE button and the OFF button
simultaneously again.
Registering is not possible in the receiver
mode.
OFF
ON /
SOURCE
The included remote control unit is equipped with a system call function allowing a series of remote control
signals to be transmitted by pressing a single button.
This function can be used for example to turn on the amplifiers power, select the input source, turn on the
monitor TVs power, turn on the source components power and set the source to the play mode, all at the touch
of a button.
System call
1
Press the power ON/SOURCE button and the
OFF button at the same time. SET UP
appears on the remote control units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display SYS
CALL on the remote control unit, then press
the ENTER button.
Display SYS MODE on the remote control
units display.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
7
3, 4, 5
2, 3, 5, 6, 8
BAND MODE
TUNING
TUNING
ENTER
SHIFT
(1) System call buttons
The buttons that can be used for the system call
function are shown on the diagram at the right.
System call signals can be stored at different
buttons according to the mode. System call
signals can be stored at a maximum of 6 buttons
other than the CALL 1 and CALL 2 buttons.
29 successive operations can be set at each of
these buttons.
(2) Storing system call signals
4
When SYS MODE is displayed, the remote
control units display switches as shown below
each time the D and H cursor buttons are
pressed.
BAND MODE
TUNING
TUNING
SYS MODE SYS CALL 1
SYS CALL 2
When SYS CALL 1 or SYS CALL 2 is
selected, the signals are stored at the SYSTEM
CALL 1 and CALL 2 buttons (green), regardless
of the mode. When the enter button is pressed,
the button registering mode (step 6) is set.
To register at other buttons, select SYS
MODE then press the enter button.
After SEL MODE is displayed on the
remote control units display, the mode last
set is displayed.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
20
ENGLISH
5
Use the D and H cursor buttons to select the
mode for the button at which the system call
signals are to be registered, then press the
ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
6
SELECT KEY is displayed. Press
the button at which the system call
signals are to be registered, then
press the ENTER button.
•“ENTER KEYS is displayed, then
the mode display appears.
ENTER
SHIFT
7
q Press the mode selector button according to
the button with the remote control signals to
be registered.
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
w Press the buttons with the remote control
signals to be registered one at a time.
8
Press the ENTER button.
•“COMPLETE appears on the
remote control units display and
registration is completed.
ENTER
SHIFT
NOTES:
The remote control signals of the buttons pressed while registering the system call signals are emitted, so
be careful not to operate the components accidentally (cover the remote sensors, for example).
If you exceed the number of signals that can be registered, FULL appears on the remote control units
display and only the number of signals that can be registered are registered (up to 29 operations).
1
Press the button at which the system call signals have been stored.
The stored signals are transmitted successively.
(3) Using the system call function
Resetting
1
Press the power ON/SOURCE button and the
OFF button at the same time.
•“SET UP appears on the remote control
units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
RESET on the remote control unit, then press
the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
(1) Resetting the system call buttons
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
3, 4, 5
2, 3, 4, 5, 6
4
Use the D and H cursor buttons to display
RESET SYS on the remote control unit, then
press the ENTER button.
•“SYS SEL appears on the remote control
units display.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
5
Press the D and H cursor buttons
to select the system call setting
to be reset.
q To reset CALL 1 or CALL 2, select SYS
CALL 1 or SYS CALL 2, then press the
ENTER button.
w To reset system call settings registered at
other buttons, select SYS MODE, press
the ENTER button, press the mode button at
which the button is registered, then press
the ENTER button again.
6
CONFIRM is displayed. To reset the setting,
press the ENTER button while CONFIRM is
displayed.
•“SYS SEL appears on the remote control
units display.
ENTER
SHIFT
The remote control units display switches
as shown below each time the D and H
cursor buttons are pressed.
RESET PRE RESET LRN
RESET ALL RESET SYS
BAND MODE
TUNING
TUNING
The remote control units display switches
as shown below each time the D and H
cursor buttons are pressed.
SYS MODE SYS CALL 1
SYS CALL 2
ENTER
SHIFT
ENTER
SHIFT
1
Press the power ON/SOURCE button and the
OFF button at the same time.
•“SET UP appears on the remote control
units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
RESET on the remote control unit, then press
the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
(2) Resetting the preset memory
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
3, 4, 5
2, 3, 4, 6, 7
21
ENGLISH
4
Use the D and H cursor buttons to display
RESET PRE on the remote control unit, then
press the ENTER button.
After SEL PRE is displayed on the remote
control units display, the registered preset
memory is displayed on the remote control
units display.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
5
Use the D and H cursor buttons
to select the code to be reset.
When the mode you want to reset is shown on
the remote control units display, press the
ENTER button to reset the preset memory.
7
CONFIRM is displayed. To reset the preset
memory, press the ENTER button while
CONFIRM is displayed.
•“COMPLETE appears on the remote control
units display.
ENTER
SHIFT
BAND MODE
TUNING
TUNING
ENTER
SHIFT
6
1
Press the power ON/SOURCE button and the
OFF button at the same time.
•“SET UP appears on the remote control
units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
RESET on the remote control units display,
then press the ENTER button.
•“RESET PRE is displayed.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
(3) Resetting learned buttons
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
3, 4, 5
2, 3, 4, 5, 6
4
Use the D and H cursor buttons to display
RESET LRN on the remote control units
display, then press the ENTER button.
•“SEL MODE is displayed, then TV
appears.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
5
Use the D and H cursor buttons to select the
mode of the button to be reset, then press the
ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
CONFIRM is displayed. To reset
the learned button for the
selected mode, press the ENTER
button while CONFIRM is
displayed.
ENTER
SHIFT
6
1
Press the power ON/SOURCE button and the
OFF button at the same time. SET UP
appears on the remote control units display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the D and H cursor buttons to display
RESET on the remote control unit, then press
the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
(4) All reset function
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
3, 4
2, 3, 4, 5
4
Use the D and H cursor buttons to display
RESET ALL on the remote control unit, then
press the ENTER button.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
CONFIRM is displayed. To reset, press the
ENTER button while CONFIRM is displayed.
•“BUSY is displayed during the resetting
operation, and COMPLETE is displayed
once resetting is completed.
ENTER
SHIFT
5
This function is for resetting all the settings to the
factory defaults.
26
ENGLISH
[3] Remote control unit operations during multi-source playback (selecting the input source)
This operation is possible when Multi mode is selected.
This operation is not possible in the REC OUT mode.
1
Select MULTI using the
RECEIVER button.
RECEIVER
(Remote Control unit)
2
Press the input
source button.
The multi source
switches directly.
1
2
3
456
789
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
TUNER
VDP
VCR-1 VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
2
3
CD
(Remote Control unit)
Example: CD
[4] Remote control unit operation during multi-source playback (adjusting the volume level)
1
Select MULTI using the
RECEIVER button.
RECEIVER
(Remote Control unit)
2
Use the VOLUME buttons to
adjust the volume level.
NOTE:
MULTI VOLUME functions
when Variable is selected
for SYSTEM SETUP MENU
Multi Vol. Level.
(See page 15.)
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
TUNER
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
2
VOLUME
+
-
(Remote Control unit)
MULTI ZONE MUSIC ENTERTAINMENT SYSTEM
When the outputs of the MULTI ZONE PRE OUT terminals are wired and connected to integrated amplifiers
installed in other rooms, different sources can be played in rooms other than the main room in which this unit
and the playback devices are installed. (Refer to ANOTHER ROOM on the diagram below.)
MULTI ZONE SPEAKER OUT can be used when Multi is selected at System Setup Menu Power Amp
Assignment. In this case, Surround Back Speaker OUT cannot be used for MAIN ROOM. (See page 10.)
Multi-source and multi-zone playback
NOTE:
For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming
or noise.
2 MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using PREOUT)
AVR-3802
B
ANOTHER ROOM MAIN ROOM
INTEGRATED AMPLIFIER
MULTI SOURCE AUDIO signal cable
SPEAKER cable
*
Refer to CONNECTIONS on pages 4 to 8.
2 MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using SPEAKER OUT)
AVR-3802
B
ANOTHER ROOM MAIN ROOM
MULTI SOURCE SPEAKER cable
SPEAKER cable
*
Refer to CONNECTIONS on pages 4 to 8.
27
ENGLISH
10
SURROUND
Before playing with the surround function
Before playing with the surround function, be sure to use the test tones to adjust the playback level from the
different speakers. This adjustment can be performed with the system setup (see page 13) or from the remote
control unit, as described below.
Adjusting with the remote control unit using the test tones is only possible in the Auto mode and only
effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically
stored in the memory.
1
2
3
456
789
+10
0
TV/
VCR
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
OUTPUT
TEST
TONE
SPEAKER
RETURN
SETUP
SHIFT
A/B
MUTING
BAND MODE
TUNING
TUNING
2
1, 3
1
Press the TEST TONE button.
TEST
TONE
After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as described below.
FL C FR SR SBR SBL
SLSW
FADER
1
Select the speaker whose level you want to
adjust.
CH VOL
(Main unit)
2
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
PHONO
CD
RETURN
SETUP
SHIFT
A/B
MUTING
BAND MODE
TUNING
TUNING
2
1
B
12
The channel whose channel level is adjusted
lowest can be faded to 12 dB using the fader
function.
If the channel levels are adjusted separately after
adjusting the fader, the fader adjustment values
are cleared, so adjust the fader again.
Fader function
This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels
(SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the different
positions when playing multi-channel music sources.
1
Select FADER.
This is only displayed when setting the fader control.
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
PHONO
CD
RETURN
SETUP
SHIFT
A/B
MUTING
BAND MODE
TUNING
TUNING
2
1
B
12
(Remote control unit)
2
Test tones are output from
the different speakers. Use
the channel volume adjust
buttons to adjust so that the
volume of the test tones is
the same for all the speakers.
BAND MODE
TUNING
TUNING
(Remote control unit)
3
After completing the
adjustment, press the TEST
TONE button again.
TEST
TONE
(Remote control unit)
ENTER
SHIFT
(Remote control unit)
The channel switches as shown below each
time the button is pressed.
Adjust the level of the selected speaker.
SELECT
(Main unit)
BAND MODE
TUNING
TUNING
(Remote control unit)
When the surround back speaker setting is set
to 1spkr for Speaker Configuration, this is
set to SB.
NOTES:
The adjustment range for the different channels
is +12 dB to 12 dB.
When using the DIRECT mode, the sound from
the subwoofer can be cut by lowering the SW
(subwoofer) setting one step from 12 dB
(setting it to OFF).
FL C FR SR SBR SBL
SLSW
FADER
CH VOL
(Main unit)
ENTER
SHIFT
(Remote control unit)
The channel switches in the order shown
below each time this button is pressed.
2
Press the D button to reduce the volume of the
front channels, the H button to reduce the
volume of the rear channels.
SELECT
(Main unit)
BAND MODE
TUNING
TUNING
(Remote control unit)
The fader function does not affect the SW
channel.
Dolby Surround Pro Logic
II
mode
1
Select the Dolby Surround Pro Logic II mode.
The Dolby Pro Logic indicator lights.
SURROUND
MODE
DOLBY/DTS
SURROUND
Light
(Main unit) (Remote control unit)
2
Play a program source with the mark.
For operating instructions, refer to the manuals of the
respective components.
B
1 3, 5 1, 4, 6
SELECT
1
2
3
456
789
+10
0
TV/
VCR
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
TUNER
VDP
VCR-1 VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
PTY RTRDS
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
4, 5, 6
3
Display
28
ENGLISH
NOTE:
There are four Dolby Surround Pro Logic modes
(NORMAL, PHANTOM, WIDE and 3 STEREO).
The AVR-3802 sets the mode automatically
according to the types of speakers set during the
system setup process (page 10).
3
Set the surround parameter mode.
SURROUND
PARAMETER
(Main unit)
SURR.
PARA.
(Remote control unit)
MODE CINEMA
Display
The on-screen display differs according to whether the operation is performed from the main unit or
the remote control unit.
4
Select the play mode.
SELECT
(Main unit)
BAND MODE
TUNING
TUNING
(Remote control unit)
Display
MODE CINEMA MODE MUSIC MODE PRO LOGIC
5
Select the various parameters. (See Surround parameters q for a description of the various parameters.)
SURROUND
PARAMETER
(Main unit)
BAND MODE
TUNING
TUNING
(Remote control unit)
MODE PRO LOGIC
CINEMA EQ
MODE CINEMA
CINEMA EQ
MODE MUSIC
PANORAMA
DIMENSION
CENTER WIDTH
When set with the on-screen display using
the remote control unit while in the MUSIC
mode, set the “” mark to OPTION
0
using the D and H cursor buttons, then press
the F cursor button.
Press the ENTER button to return to the
previous screen.
6
Set the various surround parameters.
SELECT
(Main unit)
BAND MODE
TUNING
TUNING
(Remote control unit)
7
When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons
on the remote control unit, press the SURR.
PARA. button to finish.
Surround parameters q
Pro Logic II Mode:
The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes (Cinema, Music or Pro Logic).
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting wraparound
effect with side wall imaging.
Select OFF or ON.
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from o to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phontom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
B
13
2 4,51 2,63
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1 VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
PTYRDS RT
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
5, 6
4
2
3
1
1
Dolby Digital mode (only with digital input) and DTS Surround mode
(only with digital input)
Playback with digital input
1
Select the input source.
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 14).
FUNCTION
5
VDP
(Main unit) (Remote control unit)
w Set the input mode to AUTO or DTS.
AUTO
DTS
MODE
(Main unit) (Remote control unit)
2
Select the Dolby/DTS
Surround mode.
DOLBY/DTS
SURROUND
(Remote control unit)
When performing this operation from the main
units panel, press the SURROUND MODE
button, then turn the SELECT knob and select
Dolby Pro logic or DTS NEO:6.
SURROUND
MODE
SELECT
(Main unit) (Remote control unit)
31
ENGLISH
Tone control setting
Use the tone control setting to adjust the bass and treble as desired.
To operate the tone control from the remote control unit.
1
Display the surround parameter
screen on the monitor.
The screen for the selected
surround mode appears.
TONE cannot be selected
in the Direct mode.
SURR.
PARA.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4
1, 6
3, 5
(Remote control unit)
2
Select TONE.
BAND MODE
TUNING
TUNING
(Remote control unit)
3
Switch to the Tone Control
screen.
ENTER
SHIFT
(Remote control unit)
4
5
Enter the setting.
The surround menu screen re-appears.
ENTER
SHIFT
(Remote control unit)
6
To end the setting mode, press the surround parameter button again.
SURR.
PARA.
(Remote control unit)
SELECT
(Main unit)
1
Turn the SELECT knob to select the surround
mode.
B
1 2 1,3
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to
set.
The parameters which can be set differ for the different surround modes. (Refer to
Surround Modes and Parameters on page 32.
SURROUND
PARAMETER
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC, DTS NEO:6 modes and the
input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS
surround.
Operating the surround mode and surround parameters from the main units panel.
When turned clockwise
When turned counterclockwise
DIRECT STEREO DOLBY PRO LOGIC II DTS NEO:6 5/7CH STEREO
MONO MOVIEROCK ARENAJAZZ CLUBVIDEO GAMEMATRIX
DIRECT STEREO DOLBY PRO LOGIC
II DTS NEO:6 5/7CH STEREO
WIDE SCREEN
WIDE SCREEN
MONO MOVIEROCK ARENAJAZZ CLUBVIDEO GAMEMATRIX
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the surround mode button then operate the selector.
SURROUND
MODE
(Main unit)
BAND MODE
TUNING
TUNING
(Remote control unit)
To select Bass or Treble.
BAND MODE
TUNING
TUNING
(Remote control unit)
To set the level.
1
The tone switches as follows each time the TONE CONTROL button is pressed.
To operate the tone control from the main unit.
TONE
CONTROL
(Main unit)
1
TREBLE
0
BASS
2
With the name of the volume to be adjusted selected, turn the SELECT knob to adjust
the level.
To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in
steps of 2 dB.)
To decrease the bass or treble:
Turn the control clockwise. (The bass or treble sound can be decreased up to 12 dB in
steps of 2 dB.)
SELECT
(Main unit)
*
32
ENGLISH
Surround parameters e
MODE: (DTS NEO:6)
Cinema
This mode is optimum for playing movies. Decoding is performed with emphasis on separation
performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional surround formats as well, because the
in-phase component is assigned mainly to the center channel (C) and the reversed phase component to
the surround (SL, SR and SB channels).
Music
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder
and are played directly so there is no loss of sound quality, and the effect of the surround signals output
from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound
field.
ROOM SIZE:
This sets the size of the sound field.
There are five settings: small, med.s (medium-small), medium, med.l (medium-large) and large.
small recreates a small sound field, large a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 300 ms.
TONE CONTROL:
This can be set individually for the separate surround modes other than Direct.
However, the same contents are set for DOLBY/DTS modes.
2 Surround modes and parameters
Channel output
When
playing
Dolby
Digital
Signals
DIRECT
STEREO
EXTERNAL INPUT
DOLBY PRO LOGIC II
DTS NEO:6
DOLBY DIGITAL
(6.1 SURROUND)
DTS SURROUND
(DTS ES MTRX 6.1)
5/7CH STEREO
WIDE SCREEN
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MONO MOVIE
MATRIX
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Mode Front L/R
E
E
B
B
B
B
B
B
B
B
B
B
B
B
CENTER
E
E
B
B
B
B
B
B
B
B
B
B
B
B
SURROUND
L/R
B
B
B
B
B
B
B
B
B
B
B
B
B
B
SUB-
WOOFER
E
E
B
B
B
B
B
B
B
B
B
B
B
B
SURROUND
BACK L/R
C
C
E
C
E
C
E
C
C
C
C
C
C
C
When
playing
DTS
signals
C
C
E
E
E
E
C
C
C
C
C
C
C
C
When
playing
PCM
signals
C
C
E
C
C
E
E
C
C
C
C
C
C
C
When
playing
ANALOG
signals
C
C
C
C
C
E
E
C
C
C
C
C
C
C
C: Signal
E: No signal
B: Turned on or off by speaker configuration setting
C: Able
E: Unable
* Only for 2 ch contents
Parameter (default values are shown in parentheses)
SURROUND PARAMETER
TONE
CONTROL
CINEMA EQ.
ROOM SIZE
EFFECT
LEVEL
DELAY TIME
When playing
Dolby Digital
/ DTS signals
D. COMP
LFE
DIRECT
STEREO
EXTERNAL INPUT
DOLBY PRO LOGIC II
DTS NEO:6
DOLBY DIGITAL
(6.1 SURROUND)
DTS SURROUND
(DTS ES MTRX 6.1)
5/7CH STEREO
WIDE SCREEN
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MONO MOVIE
MATRIX
E
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
E
E
E
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
E
C
(OFF)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
(Medium)
C
(Medium)
C
(Medium)
C
(Medium)
E
E
E
E
E
E
E
E
E
E
C
(10)
C
(10)
C
(10)
C
(10)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
(30msec)
C
(OFF)
C
(OFF)
E
C
(OFF)
E
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(0dB)
C
(0dB)
E
C
(0dB)
E
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
Mode
MODE
E
E
E
C
(CINEMA)
C
(CINEMA)
E
E
E
E
E
E
E
E
E
EFFECT
E
E
E
E
E
E
E
E
C
(ON)
E
E
E
E
E
LEVEL
E
E
E
E
E
E
E
E
C
(10)
E
E
E
E
E
SURROUND
BACK
E
E
E
C
(
NON MTRX
)
C
(
NON MTRX
)
C
(MTRX ON)
C
(MTRX ON)
E
E
E
E
E
E
E
PANORAMA
E
E
E
C
(OFF)
E
E
E
E
E
E
E
E
E
E
DIMENSION
E
E
E
C
(3)
E
E
E
E
E
E
E
E
E
E
CENTER
WIDE
E
E
E
C
(0)
E
E
E
E
E
E
E
E
E
E
PRO LOGIC II MUSIC
MODE ONLY
C:
Adjustable
E:
Not adjustable
33
ENGLISH
12
LISTENING TO THE RADIO
Auto tuning
B
1
1
Set the input function to TUNER.
FUNCTION
(Main unit)
2
Press the RECEIVER button
on the remote control unit to
select TUNER.
RECEIVER
(Remote control unit)
3
Watching the display, press
the BAND button to select
the desired band (AM or
FM).
BAND MODE
TUNING
TUNING
1
TUNER
(Remote control unit)
(Remote control unit)
4
Press the MODE button to
set the auto tuning mode.
BAND MODE
TUNING
TUNING
(Remote control unit)
Auto appears on the
display.
5
Press the TUNING UP or
DOWN button.
BAND MODE
TUNING
TUNING
(Remote control unit)
Automatic searching begins,
then stops when a station is
tuned in.
If tuning does not stop at the desired station, use to
the Manual tuning operation.
1
2
3
456
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP DVDCDR/TAPE
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
3, 4, 5
1
2
Manual tuning
1
Set the input function to TUNER.
FUNCTION
(Main unit)
2
Press the RECEIVER button
on the remote control unit to
select TUNER.
RECEIVER
(Remote control unit)
1
TUNER
(Remote control unit)
3
Watching the display, press
the BAND button to select
the desired band (AM or
FM).
BAND MODE
TUNING
TUNING
(Remote control unit)
4
Press the MODE button to
set the manual tuning mode.
Check that the displays
AUTO indicator turns off.
BAND MODE
TUNING
TUNING
(Remote control unit)
5
Press the TUNING UP or
DOWN button to tune in the
desired station.
The frequency changes
continuously
when the
button is held in.
BAND MODE
TUNING
TUNING
(Remote control unit)
NOTES:
When in the auto tuning mode on the FM band, the
STEREO indicator lights on the display when a
stereo broadcast is tuned in. At open frequencies,
the noise is muted and the TUNED and
STEREO indicators turn off.
When the manual tuning mode is set, FM stereo
broadcasts are received in monaural and the
STEREO indicator turns off.
Preset memory
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4
2. 5
3
1
Use the Auto tuning or Manual tuning
operation to tune in the station to be preset in
the memory.
2
Press the MEMORY button.
MEMORY
RETURN
A/B
(Remote control unit)
3
Press the SHIFT button and
select the desired memory
block (A to E).
ENTER
SHIFT
(Remote control unit)
5
Press the MEMORY button
again to store the station in
the preset memory.
MEMORY
RETURN
A/B
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset
8 stations (channels 1 to 8) in each of blocks
A to E.
Checking the preset stations
1
Press the OSD button repeatedly until the Tuner Preset Stations screen
appears on the on screen display.
OSD
(Remote control unit)
The preset broadcast stations can be checked on the on screen display.
VCR DBS/CABLE
MEMORY
VOLUME
CHANNEL
VDP DVD
DISPLAY
RETURN
SETUP
MENU
SURR.
PARA.
OSD
A/B
BAND MODE
TUNING
1
4
Press the CHANNEL + (UP)
or (DOWN) button to select
the desired preset channel (1
to 8).
SKIP
SKIP
CHANNEL
+
-
(Remote control unit)
34
ENGLISH
Recalling preset stations
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
PHONO
CD
DISPLAY
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
2
1
To call out preset stations from the remote control unit.
1
Watching the display, press
the SHIFT button to select
the preset memory block.
ENTER
SHIFT
(Remote control unit)
2
Watching the display, press
the CHANNEL + or button
to select the desired preset
channel.
SKIP
SKIP
CHANNEL
+
-
(Remote control unit)
B
21
Calling out preset stations from the main units panel.
1
Press the TUNING PRESET
button.
TUNING
PRESET
(Main unit)
2
Turn the FUNCTION knob
and select the desired
station.
FUNCTION
(Main unit)
RDS (Radio Data System)
RDS (works only on the FM band) is a broadcasting service which allows station to send additional information
along with the regular radio program signal.
The following three types of RDS information can be received on this unit:
2 Program Type (PTY)
PTY identifies the type of RDS program.
The program types and their displays are as follows:
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
DRAMA
CULTURE
SCIENCE
VARIED
POP M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
NATION M
OLDIES
FOLK M
DOCUMENT
News
Current Affairs
Information
Sports
Education
Rock Music
Easy Listening
Music
Light Classical
Serious
Classical
Other Music
Phone In
Travel
Leisure
Jazz Music
Country Music
2 Traffic Program (TP)
TP identifies programs that carry traffic announcements.
This allows you to easily find out the latest traffic conditions in your area before you leaving home.
2 Radio Text (RT)
RT allows the RDS station to send text messages that appear on the display.
NOTE: The operations described below using the RDS, PTY and RT buttons will not function in areas in which
there are no RDS broadcasts.
Drama
Culture
Science
Varied
Pop Music
Weather
Finance
Childrens
programmes
Social Affairs
Religion
National Music
Oldies Music
Folk Music
Documentary
RDS search
Use this function to automatically tune to FM stations that provide RDS service.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4
1
3
2
1
Set the input function to
TUNER.
1
TUNER
(Remote control unit)
4
Press the CHANNEL + (UP)
or (DOWN) button to
automatically begin the RDS
search operation.
SKIP
SKIP
CHANNEL
+
-
(Remote control unit)
2
Press the RECEIVER button
on the remote control unit to
select TUNER.
RECEIVER
(Remote control unit)
3
Press the RDS button until
RDS SEARCH appears on
the display.
TEST
TONE
RDS
(Remote control unit)
If no RDS stations is found with above
operation, all the reception band are searched.
5
When a broadcast station is found, that station's
name appears on the display.
6
To continue searching, repeat step 4.
If no other RDS station is found when all the
frequencies are searched, NO RDS is
displayed.
35
ENGLISH
PTY search
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to Program Type (PTY).
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
5
1
3
2
4
1
Set the input function to
TUNER.
1
TUNER
(Remote control unit)
5
Press the CHANNEL + (UP)
or (DOWN) button to
automatically begin the PTY
search operation.
SKIP
SKIP
CHANNEL
+
-
(Remote control unit)
2
Press the RECEIVER button
on the remote control unit to
select TUNER.
RECEIVER
(Remote control unit)
3
Press the RDS button until
PTY SEARCH appears on
the display.
TEST
TONE
RDS
(Remote control unit)
If there is no station broadcasting the
designated program type with above operation,
all the reception bands are searched.
6
The station name is displayed on the display
after searching stops.
7
To continue searching, repeat step 5.
If no other station broadcasting the designated
program type is found when all the frequencies
are searched, NO PROGRAMME is
displayed.
4
Watching the display, press
the PTY button to call out the
desired program type.
SPEAKER
PTY
(Remote control unit)
TP search
Use this function to find RDS stations broadcasting traffic program (TP stations).
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2/ V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4
1
3
2
1
Set the input function to
TUNER.
1
TUNER
(Remote control unit)
4
Press the CHANNEL + (UP)
or (DOWN) button TP
search begins.
SKIP
SKIP
CHANNEL
+
-
(Remote control unit)
2
Press the RECEIVER button
on the remote control unit to
select TUNER.
RECEIVER
(Remote control unit)
3
Press the RDS button until
TP SEARCH appears on
the display.
TEST
TONE
RDS
(Remote control unit)
If no TP station is found with above operation,
all the reception bands are searched.
5
The station name is displayed on the display
after searching stops.
6
To continue searching, repeat step 4.
If no other TP station is found when all the
frequencies are searched, NO PROGRAMME
is displayed.
RT (Radio Text)
RT appears on the display when radio text data is
received.
When the RT button is pressed while receiving an RDS
broadcast station, the text data broadcast from the
station is displayed. To turn the display off, press the
RT button again. If no text data is being broadcast,
NO TEXT DATA is displayed.
+10
0
TV/
VCR
RDS PTY RT
SURROUND
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DIRECT
‘‘RT’’
41
ENGLISH
System setup items and default values (set upon shipment from the factory) Surround modes and parameters
System setup Default settings
w
e
t
y
i
Speaker
Configuration
(Surround
Speaker
Setting)
(Subwoofer
mode)
SB CH Auto
Flag Detect
Channel Level
Digital In
Assignment
On Screen
Display
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for
full-size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
Use this function when using multiple surround
speaker combinations for more ideal surround
sound. Once the combinations of surround
speakers to be used for the different surround
modes are preset, the surround speakers are
selected automatically according to the surround
mode.
This selects the subwoofer speaker for playing deep bass
signals.
Set the method of playing the surround backchannel for digital
signals.
This adjusts the volume of the signals output from the speakers
and subwoofer for the different channels in order to obtain
optimum effects.
This assigns the digital input jacks for the different
input sources.
This sets whether or not to display the on-screen display that
appears on the monitor screen when the controls on the remote
control unit or main unit are operated.
Surround
mode
Surround
speaker
Input
source
Digital
Inputs
Front Sp.
Large
Center Sp. Surround Sp. A /BSub Woofer
Small SmallYes
DOLBY/
DTS
SURROUND
5CH/7CH
STEREO
DSP
SIMULATION
EXT. IN
——
AAAA——
LFE
Front L & R Center Surround L & RSub Woofer
3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)3.6 m (12 ft)
Front L
Front R Center
Surround
R
Surround
Back R
Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CD DVD TV/DBS
CDR
/TAPE
VDP
COAXIAL
OPTICAL
1
OPTICAL
2
OPTICAL
3
OFF
On Screen Display = ON
Surround Back Sp.
Small / 2spkrs
DTS-ES / 6.1 Source Auto Flag Detect Mode = OFF
r
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
SBL & SBR
3.0 m (10 ft)
u
This sets the output level for the multi output jacks. 0 dB
Surround
Back L
0 dB
Surround
L
0 dB
Multi vol. Level
VCR-2
OFF
VCR-1
OFF
Power AMP
Assignment
Set this to switch the surround back channels power amplifier
for use for multi-zone.
Surround Back
q
A1 ~ A8 87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz
B1 ~ B8 522 / 603 / 999 / 1404 / 1611 kHz, 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
o
Auto Tuner
Preset
FM stations are received automatically and stored in the
memory.
Crossover
Frequency
Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
80 Hz
*
Channel output
When
playing
Dolby
Digital
Signals
DIRECT
STEREO
EXTERNAL INPUT
DOLBY PRO LOGIC II
DTS NEO:6
DOLBY DIGITAL
(6.1 SURROUND)
DTS SURROUND
(DTS ES MTRX 6.1)
5/7CH STEREO
WIDE SCREEN
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MONO MOVIE
MATRIX
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Mode Front L/R
E
E
B
B
B
B
B
B
B
B
B
B
B
B
CENTER
E
E
B
B
B
B
B
B
B
B
B
B
B
B
SURROUND
L/R
B
B
B
B
B
B
B
B
B
B
B
B
B
B
SUB-
WOOFER
E
E
B
B
B
B
B
B
B
B
B
B
B
B
SURROUND
BACK L/R
C
C
E
C
E
C
E
C
C
C
C
C
C
C
When
playing
DTS
signals
C
C
E
E
E
E
C
C
C
C
C
C
C
C
When
playing
PCM
signals
C
C
E
C
C
E
E
C
C
C
C
C
C
C
When
playing
ANALOG
signals
C
C
C
C
C
E
E
C
C
C
C
C
C
C
C: Signal
E: No signal
B: Turned on or off by speaker configuration setting
C: Able
E: Unable
* Only for 2 ch contents
Parameter (default values are shown in parentheses)
SURROUND PARAMETER
TONE
CONTROL
CINEMA EQ.
ROOM SIZE
EFFECT
LEVEL
DELAY TIME
When playing
Dolby Digital
/ DTS signals
D. COMP
LFE
DIRECT
STEREO
EXTERNAL INPUT
DOLBY PRO LOGIC II
DTS NEO:6
DOLBY DIGITAL
(6.1 SURROUND)
DTS SURROUND
(DTS ES MTRX 6.1)
5/7CH STEREO
WIDE SCREEN
ROCK ARENA
JAZZ CLUB
VIDEO GAME
MONO MOVIE
MATRIX
E
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
E
E
E
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
E
C
(OFF)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
(Medium)
C
(Medium)
C
(Medium)
C
(Medium)
E
E
E
E
E
E
E
E
E
E
C
(10)
C
(10)
C
(10)
C
(10)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
(30msec)
C
(OFF)
C
(OFF)
E
C
(OFF)
E
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(OFF)
C
(0dB)
C
(0dB)
E
C
(0dB)
E
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
C
(0dB)
Mode
MODE
E
E
E
C
(CINEMA)
C
(CINEMA)
E
E
E
E
E
E
E
E
E
EFFECT
E
E
E
E
E
E
E
E
C
(ON)
E
E
E
E
E
LEVEL
E
E
E
E
E
E
E
E
C
(10)
E
E
E
E
E
SURROUND
BACK
E
E
E
C
(
NON MTRX
)
C
(
NON MTRX
)
C
(MTRX ON)
C
(MTRX ON)
E
E
E
E
E
E
E
PANORAMA
E
E
E
C
(OFF)
E
E
E
E
E
E
E
E
E
E
DIMENSION
E
E
E
C
(3)
E
E
E
E
E
E
E
E
E
E
CENTER
WIDE
E
E
E
C
(0)
E
E
E
E
E
E
E
E
E
E
PRO LOGIC II MUSIC
MODE ONLY
C: Adjustable
E: Not adjustable
42
ENGLISH
17
SPECIFICATIONS
2 Audio section
Power amplifier
Rated output: Front: 105 W + 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W + 150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Center: 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Surround: 105 W + 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W + 150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Surround back: 105 W + 105 W (
8 /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.
)
150 W + 150 W (
6 /ohms, 1 kHz with 0.7% T.H.D.
)
Dynamic power: 140 W x 2 ch (8 /ohms)
210 W x 2 ch (4 /ohms)
240 W x 2 ch (2 /ohms)
Output terminals: Front, Center, Surr. Back/Multi Zone: 6 ~ 16 /ohms
Surround: A or B 6 ~ 16 /ohms
A + B 8 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, 3 dB (DIRECT mode)
S/N: 102 dB (DIRECT mode)
Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
Digital
D/A output: Rated output 2 V (at 0 dB playback)
Total harmonic distortion 0.008% (1 kHz, at 0 dB)
S/N ratio 102 dB
Dynamic range 96 dB
Digital input: Format Digital audio interface
Phono equalizer (PHONO input REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 8 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
S-video jacks
Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
C (color) signal 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +0, 3 dB
Color component video terminal
Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
PB/CB (blue) signal 0.7 Vp-p, 75 /ohms
PR/CR (red) signal 0.7Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 27 MHz +0, 3 dB
2 Tuner section
[FM] (note: µV at 75 /ohms, 0 dBf=1 x 10
15
W) [AM]
Reseiving Range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 80 dB
STEREO 75 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.4%
STEREO 0.5%
2 General
Power supply: AC 230 V, 50 Hz
Power consumption: 400 W
2 W (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 416 (D) mm
Mass: 16.5 kg
2 Remote control unit (RC-884)
Batteries: R6P/AA Type (three batteries)
External dimensions: 61 (W) x 230 (H) x 34 (D) mm
Mass: 200 g (not including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
DEUTSCH
48
Anschlüsse
Beziehen Sie sich zur Durchführung der Anschlüsse auch auf die Betriebsanleitungen der anderen
Komponenten.
(
L
) (
R
)
(
L
) (
R
) (
L
) (
R
)
(
L
) (
R
)
Anschlußbuchse für
einen Subwoofer mit
eingebautem
Verstärker (Super-
Tieftöner) usw.
SURROUND-
LAUTSPRECHER-
SYSTEME (A)
MITTELLAUT-
SPRECHER-
SYSTEM
FRONTLAUT-
SPRECHER-
SYSTEME
SURROUND-
LAUTSPRECHER-
SYSTEME (B)
SURROUND BACK/MULTI ZONE
LAUTSPRECHERSYSTEME
HINWEISE:
Um mit einem Lautsprecher
Surround back nutzen zu
können, müssen Sie den
Lautsprecher an SURR. BACK L
CH anschließen.
Die Einstellungen müssen
geändert werden, um diesen
Lautsprecher für MULTI ZONE
anwenden zu können.
Siehe Seite 50.
AVR-3802
PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER
OUTPUT
SIGNAL
DETECT
SURROUND
BACK CH
TUNING
PRESET
REC /
MULTI
6.1 / 7.1
SURROUND
SOURCE
ON / STANDBY
REMOTE
SENSOR
FUNCTION
SURROUND
SPEAKER
A
B
AUTO
PCM
DTS
SIGNAL
DIGITAL
INPUT
VOLUME LEVEL
MASTER VOLUME
SURROUND
MODE
SURROUND
PARAMETER
TONE
CONTROL
SELECT CH VOL
DIMMER
STATUS TONE DEFEAT
VIDEO SELECT
INPUT
EXT. IN
ANALOG
AUTO PCM DTS
PHONES
ON / STANDBY
OFF
£
¢
!8
!9@0@1@2@3@4@5@6@7@8@9
q w ter y u i o
!0 !1 !2 !3 !4 !5 !6 !7
Vorderseite
6
BEZEICHNUNG DER TEILE UND DEREN FUNKTIONEN
Einzelheiten zu den Funktionen der einzelnen Bauteile finden Sie auf den in Klammern ( ) angegebenen
Seiten.
q
Betriebsschalter .............................................(62)
w
Kopfhörerbuchse (PHONES) ..........................(64)
e
6,1/7,1 SURROUND-Taste..............................(69)
r
Surround-Lautsprechersystem-Anzeigen
(SURROUND SPEAKER A/B)
t
Automatik-Taste (AUTO).................................(63)
y
PCM-Taste ......................................................(63)
u
DTS-Taste .......................................................(63)
i
ANALOG-Taste ...............................................(63)
o
EXT. IN-Taste ..................................................(63)
!0
Video-Wahltaste (VIDEO SELECT) .................(65)
!1
DIMMER-Taste ...............................................(65)
!2
STATUS-Taste .................................................(65)
!3
TONE DEFEAT-Taste.......................................(64)
!4
Surround-Modus-Taste (SURROUND MODE)
...(63)
!5
SURROUND-PARAMETER-Taste ...................(68)
!6
Wahlknopf (SELECT) ......................................(63)
!7
TONE CONTROL-Taste ..................................(64)
!8
Kanal-Lautstärketaste (CH VOL).....................(67)
!9
Hauptlautstärke-Regler (MASTER VOLUME)
....(63)
@0
Hauptlautstärke-Anzeige (VOLUME LEVEL)
......(63)
@1
Display
@2
Eingangsmodus-Anzeigen (INPUT).................(63)
@3
SIGNAL-Anzeige.............................................(63)
@4
Fernbedienungssensor
(REMOTE SENSOR).......................................(56)
@5
Netzanzeige....................................................(62)
@6
Funktionsknopf (FUNCTION)..........................(63)
@7
Abstimm-/Senderspeichertaste
(TUNING/PRESET)..........................................(74)
@8
Tonquellen-Wahltaste (SOURCE SELECT) .....(63)
@9
Aufnahme/Multi-Wahltaste (REC/MULTI).......(65)
Vorsichtsmaßnahmen beim Anschluß der Lautsprecher
Wenn ein Lautsprecher in der Nähe eines Fernsehgerätes oder Video-Monitors aufgestellt
wird, können durch den Lautsprechermagnetismus Farbstörungen auf dem Bildschirm
auftreten. Stellen Sie den Lautsprecher in einem derartigen Fall in größerer Entfernung auf,
damit dieser Effekt nicht mehr auftritt.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283

Denon AVR 3802 Operating Instructions Manual

Kategori
AV-mottagare
Typ
Operating Instructions Manual

på andra språk