Andersson L48510 Användarmanual

L48510 FHD PVR | 48 inch LED-TV

User manual

English | Svenska | Norsk

Copyright

This manual is the copyright of CI no 556520-4137. No part of this manual may be revised, copied or transmitted

in any way without written permission from CI no 556520-4137.

Statement

This manual does not provide any warranty or related declarations. All information in this manual including the

product speciﬁcation, pictures and literatures is just for reference, CI no 556520-4137 reserves the rights to update

contents of this manual without further notice.

Copyright

Org.nr 556520-4137 äger upphovsrätten till den här handboken. Inga delar av handboken får ändras, kopieras eller

överföras utan skriftligt tillstånd från org. nr 556520-4137.

Meddelande

Den här handboken innehåller inga garantier eller andra typer av utfästelser. All information i handboken, inklusive

tekniska data, bilder och texter, är endast exempel och används i referenssyfte. Org.nr 556520-4137 förbehåller sig

rätten att upp-datera innehållet i handboken utan föregående meddelande.

Opphavsrett

Org.nr 556520-4137 har opphavsretten til denne håndboken. Ingen deler av denne håndboken skal revideres, kopieres

eller overføres på noen måte uten skriftlig samtykke fra org.nr 556520-4137.

Erklæring

Denne håndboken gir ingen garanti eller tilhørende forsikringer. All informasjon i denne håndboken, inklusiv produkt-

spesiﬁkasjon, bilder og tekst, er bare ment som referanse. Org.nr 556520-4137 forbeholder seg retten til å oppdatere

innholdet i denne håndboken uten forvarsel.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. This

product and the accessories packed together are the applicable product

to the WEEE directive except batteries. Please dispose of any materials in

accordance with your local recycling regulations. When discarding the unit,

comply with your local rules or regulations. Batteries should never be thrown

away or incinerated but disposed of in accordance with your local regulations

concerning chemical wastes.

ANGÅENDE ÅTERVINNING

Kartonger och packmaterial till denna produkt är återvinningsbart och

kan återanvändas. Denna produkt och alla tillbehör förutom batterier följer

WEEE-direktivet om återvinning. Vänligen släng allt eventuellt material från

produkten enligt de lokala regler som råder där du bor. När du kasserar din

produkt, följ då dina lokala lagar om återvinning. Batterier får aldrig slängas

eller eldas utan ska istället tas hand om enligt dina lokala regler om kemiskt

avfall.

OM RESIRKULERING

Kartonger og pakkematerialet till dette produktet er gjenvinningsbart og

kan resirkuleres. Dette produktet og alt tillbehør, utenom batteriene, følger

WEEE-direktivet om resirkulering. Vær vennlig og kast alt eventuelt materiale

fra produktet i henhold til de lokale regler der du bor. Når du kasserer ditt

produkt, følg dine lokale lover om gjenvinning. Batterier skal aldri kastes eller

brennes, følg dine lokale regler om kjemisk avfall.

Table of Content / Innehållsförteckning / Register

English

Parts 4

Panels 5-6

Setup 7

Remote Control 8-9

Connecting External Devices 10

Customizing TV Settings 11-30

Important Safety Instructions 31

Speciﬁcations 32

Svenska

Delar 34

Paneler 35-36

Installation 37

Fjärrkontroll 38-39

Anslut externa enheter 40

Anpassa TV-inställningar 41-60

Viktiga säkerhetsinstruktioner 61

Speciﬁkationer 62

Norska

Deler 64

Paneler 65-66

Installasjon 67

Fjernkontroll 68-69

Tilkobling av eksterne enheter 70

Tilpasning av tv-innstillinger 71-90

Viktige sikkerhetsinstruksjoner 91

Spesiﬁkasjoner 92

English Svenska Norsk

4

What’s Included:

Parts

User Manual

Quick

Start Guide

L

OGO

TV Set

TV Stand

User Manual Quick Start Guide

Remote Control with Batteries

TIMESHIF

T

FA

V

/TTX

/HOL

D

/REVEA

L

SUBPAG

E

SOURCE

INFO

MENU

EXI

T

P.

MOD

E

S.MOD

E

CH

TV/RADI O

RE

C

OK

LI

ST

/INDE

X

Column Base

12 Screws

Mini AV connection cable

Mini YPbPr connection cable

English Svenska Norsk

5

Front View

1. POWER Indicator

Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby

mode.

2. IR (Infrared Receiver)

Receive IR signals from the remote control.

3. POWER

Switch the TV between On/Standby mode.

4. SOURCE

Press to select among different input signal sources.

5. MENU

Display the OSD (on screen display) menu.

6. CH

Press to select a channel.

7. VOL +/-

Press to adjust the volume.

Panels

34567

English Svenska Norsk

6

Rear View

1. HDMI Inputs

Connect to a High-Deﬁnition (HD)

signal output devi ce.

2. SCART socket

You can connect your TV to

devices with a SCART output such

as a set top box.

3. PC AUDIO Input

Connect to a computer audio

output.

4. VGA Input

Connect to a computer or other

devices with a VGA interface.

5. RF Input

Connect to the antenna (75 VHF/

UHF) socket with the RF coaxial

cable

6. COAXIAL Digital Audio Output

Connect to the audio socket on

the digital audio system.

7. USB port

Connect to USB-devices

8. MINI AV

Connect to the composite VIDEO

and AUDIO (L/R) output sockets

on external video devices.

9. MINI YPBPR

Connect to AV devices with

Component/AV output sockets.

10. Common interface slot

Your TV is equipped with a

common interface slot that allows

you to insert a subscription card

(to be purchased separately) to

view pay to view services.

11. Headphone Output

Connect your headphones.

Panels

COAXIAL HDMI 3 HDMI 4

MINI AV

MINI

YPbPr

CI

6 7 8 9 10

HDMI 1 HDMI 2 SCART

PC

AUDIO

VGA

RF

2 3 4 51

1

USB

5V---500mA

11

English Svenska Norsk

7

Setup

1.

Lay the TV facedown on a flat,

cushioned surface to avoid damage or

scratching.

2.

Fix the stand support to the base stand

using the 6 provided screws.

3. Fix the stand assembly to the TV using

the 6 provided screws.

1.

Lay the TV facedown on a flat,

cushioned surface to avoid damaging

or scratching.

2.

Untighten the 6 screws holding the

stand support and remove it.

3.

Attach the wall-mount bracket to

the TV using the mounting holes on

the back of the TV. Mount this TV

according to the instructions included

in the wall-mount bracket.

Installing the Stand:

Removing the Stand:

English Svenska Norsk

8

Remote Control

Understanding the remote control buttons

TIMESHIFT

FAV

/TT X

/HOL D

/REVEA L

SUBP AG E

SOURCE INFO

MENU

EXIT

P.MODE

S.MODE

CH

TV/RADI O

REC

OK

LIS T

/INDE X

1 2

8

11

14

17

13

3

4

5

6

7

10

9

12

15

16

1. : Switch the TV between on and standby

mode.

2.

: Mute and restore your TV sound.

3. TIMESHIFT: Turn on and off the Time shift

function (DTV mode):

: Press to start playback or pause (USB

Mode).

: Press to stop playback (USB mode).

FAV: Display the Favourite Channel list (ATV/

DTV mode).

REC /: One button recording function

button. Press it to record the current DTV

video.

EPG: Displays the EPG (Electronic Program

Guide) (DTV mode).

4.

I

: Press to skip to the beginning of the

previous chapter or track (USB mode).

TTX: Turn on and off the teletext function

(DTV mode).

 :Press to fast rewind (USB mode).

INDEX: Press to select the page number of

the INDEX from teletext (DTV mode).

SUBTITLE: Display the subtitle which is

broadcast with the program (DTV mode).

Selects subtitles on the media (USB mode).

ASPECT Select from the following mode

settings: 16:9/ Zoom1 / Zoom2 / Just

Scan(Only HDMI Mode) / Auto / 4:3

5.

I

: Press to skip to the beginning of the

next chapter or track (USB mode).

HOLD: Freeze a multi-page passage on the

screen in Teletext (DTV mode).

 :Press to advance playback rapidly

(USB mode).

REVEAL Reveal hidden information such as

the answer to a quiz in Teletext (DTV mode).

SUBPAGE: Display the subpage on the

teletext screen (DTV mode).

SLEEP: Set the TV sleep timer

6. RED/GREEN/YELLOW/BLUE: Press the button

to select corresponding function on the

screen.

English Svenska Norsk

9

Remote Control

7. SOURCE: Select among the different

input signal. SOURCES: DTV / ATV /

AV /SCART / YPBPR / HDMI 1/HDMI2 /

HDMI3 / PC/ USB mode.

8. INFO: Display the present screen

information such as the current channel

and the input source.

9.  : Allows you to navigate the

OSD menu and adjust the system

settings to your preference.

OK: Conﬁrm changes in the TV menu.

Display a list of channels saved in the TV

tuner memory.

10. MENU: Display the TV settings menu.

11. EXIT: Exit the OSD (On Screen Display)

menu.

12. VOL + / -: Adjust the volume.

13. P.MODE: Select picture mode.

S.MODE: Select sound mode.

14. CH + / - : Select a channel.

15. 0-9 Number Button: Select a programme

or Select numbered items in a menu.

16. TV.RADIO Select TV program or Radio

program (DTV mode).

17.

: Return to previous viewing channel.

Note:

Remove battery during storage or when you

are not using the device for a long time.

To control the device using the remote

control, point the remote control at the device

and then press the button with the required

function.

The maximum range of the remote control is

about 5 meters with a deviation of up to +/-

30° from the perpendicular direction to the

reception sensor of the remote control on the

front side of the device. The falling capacity

of the batteries gradually reduces the remote

control range.

There must be no solid obstacles in the area

between the remote control and the device

when the remote control is being used.

During standard use the lifetime of batteries in

the remote control is about 1 year.

When the effective range of the remote

control is substantially reduced, or when

there are problems with its use, change both

the batteries in the remote control.

If you will not be using the remote control for a

longer period of time, take out both batteries

from it - in this in this way you will prevent

potential damage caused by their leakage.

English Svenska Norsk

10

Connecting External Devices

AC outlet

HDMI 1.4 Cable

HDMI

1.4 Cable

CI Module

RF(75Ω)

DVD or Blu-ray Player,

Sattelite Receiver,

Cable Box or Game

Console

RF Cable

Scart

Cable

VGA

Cable

PC

Audio

Cable

Computer

Antenna or

Cable Box / Wall Jack

PC AUDIO VGA

SCART

Audio/Video device

with Scart socket

AUDIO/VIDEO

OUT

Component

Cable

Mini AV

Cable

AV Cable

Mini

YPBPR

Cable

COAXIAL

HDMI 3 HDMI 4

Mini

YPBPR

Mini

AV

CI

Audio System

HDMI 1 HDMI 2

Coaxial

Cable

USB

5V---500mA

English Svenska Norsk

11

Customizing TV Settings

Initial Setup

The time you turn the TV on, it will go straight into

the time installation menu.

Select OSD Language

Then press the  buttons to select OSD

language from among the following options:

English, Français, Deutsch, Italiano, Español,

Português.

Select Country

Press the buttons  to select Country,

then press the buttons  to select: France,

Greece, Italy, Portugal, Spain, UK, then

press the OK button to start Channel Tuning

automatically.

Selecting the Input Source

1. Press the SOURCE button at the front right side of the TV or the

SOURCE button on the remote control to display the Input Source

list.

2. Press the  buttons to select the input source that you want:

DTV / ATV / AV / SCART / YPbPr / HDMI1 / HDMI2 / HDMI3 /

HDMI4 / VGA / USB.

3. Press the OK button to conﬁrm your selection.

Channel Selection

Press the CH + / – buttons repeatedly or the 0-9 buttons to select the

channel.

Alternative:

In DTV mode, press the OK button to enter the Channel List. Then

use the  buttons to highlight and select the channel. Press the OK button to view the selected

channel.

If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to

enter the password, the channel will then be unlocked.

´ Press the FAV button repeatedly to select the favourite channel if you have previously preset

your favourite channels.

Alternative: Press the FAV button to view the Favourite List. Then use the  buttons to highlight

and select the channel. Press the OK button to view the selected channel.

´ Press the

button to return to the previously viewed channel.

YPBPR

VGA

HDMI4

English Svenska Norsk

12

Customizing TV Settings

Volume Adjustment

´ Press the VOL + / – buttons to adjust the volume.

´ If you wish to switch the sound , press the button, press the button again or the VOL + / – button

to resume audio listening.

Picture Mode

Allows you to set your preferred Picture Mode

1. Press the MENU button to display the main menu.

Press the  buttons to select PICTURE in the main

menu, then press the  or OK button, it will highlight

the option.

2. Press the  buttons to select the option you want

to adjust in PICTURE menu.

3. Press the   buttons to change the following

settings.

TIPS: 1. You can change the value of contrast, brightness, color and sharpness when the picture is

in Personal mode.

2. You can press P.MODE button on the remote control to change the Picture Mode directly.

Picture Mode Select the following types of picture enhancement: Dynamic, Standard, Mild,

Personal.

Contrast This property can adjust the highlight intensity of the picture, but the shadow of

the picture is invariable.

Brightness This property can adjust the brightness output of the picture. It will affect the dark

parts of the picture.

Colour This property can adjust the saturation of the colour based on your preference.

Tint This property may be used to compensate color change with the transmission in

the NTSC code.

Sharpness Adjust the sharpness in the detail of the picture.

Colour Temp This property can increase or reduce warm colour of the picture (red), and the

cold colour (blue) according to your preference.

Noise Reduction This property can reduce noise.

Available options: Off / Low / Middle / High.

4. Press the EXIT button to exit menu.

PICTURE

Picture Mode Standard

Contrast 5 0

Brightness 50

Colour 5 0

Tint 5 0

Sharpness 50

Colour Temp Normal

Noise Reduction Middle

PICTURE

Picture Mode Standard

Contrast

Brightness 50

50

Colour

Tint

Sharpness 50

Colour Temp Normal

Noise Reduction Middle

English Svenska Norsk

13

Customizing TV Settings

Sound Mode

Allows you to set your preferred Sound Mode.

1. Press the MENU button to display the main menu. Press the

 buttons to select SOUND in the main menu, then press

the  or OK button, it will highlight the option.

2. Press the  buttons to select the option that you want to

adjust in the SOUND menu.

3. Press the   buttons to change the following settings.

TIPS:

1. You can change the value of treble, bass, balance when the sound is in Personal mode.

2. You can press the S.MODE button on the remote control to change the Sound Mode directly.

Sound Mode Select a type of audio-enhancement from among the following options: Stand-

ard, Music, Movie, Sports, Personal) You can change the value of Treble and

Bass when the sound is in Personal mode.

Treble Controls the relative instensity of higher-pitched sounds.

Bass Controls the relative instensity of lower-pitched sounds.

Balance Adjusts the relative volume of the speakers in a multiple speaker system.

Auto Volume Volume levels are automatically controlled (e.g. advertisements tend to be louder

than the programmes).

SPDIF Mode Select the digital audio output mode.

AD Switch Audio description is an auxiliary audio function that provides an additional audio

track for visually challenged persons. On / Off

SOUND

Sound Mode

Treble

Bass

Balance

Auto Volume

SPDIF Mode

AD Switch

Standard

50

0

On

PCM

On

English Svenska Norsk

14

Customizing TV Settings

OSD Language

Allows you to select your preferred OSD language.

1. Press the MENU button to display the main menu and

then use the  buttons to select SETUP in the main

menu and then press the  or OK button, it will highlight

the ﬁrst option.

2. Press the  buttons to select OSD Language and

then press the OK buttons enter to sub-menu.

3. Press the   buttons to change the settings.

4. Press the OK button to save the setting and return back

to the previous menu.

5. Press the EXIT button to exit the menu

TT Language

Allows you to select your preferred Teletext language.

1. Press the MENU button to display the main menu and then

use the  buttons to select SETUP in the main menu and

then press the  or OK button, it will highlight the ﬁrst option.

2. Press the  buttons to select TT Language and then

press the  buttons enter to sub-menu.

3. Press the   buttons to change the settings.

4. Press the OK button to save the setting and return back to

the previous menu.

5. Press the EXIT button to exit the menu

Audio languages

Allows you to select your preferred audio language.

1. Press the MENU button to display the main menu and then

use the  buttons to select SETUP in the main menu and

then press the  or OK button, it will highlight the ﬁrst option.

2. Press the  buttons to select Audio Languages and

then press OK or  button to enter to Primary sub-menu

(press  button again to enter to Secondary sub-menu).

3. Press the   buttons to select the language you want,

then press the OK button to conﬁrm and back to the SETUP

menu.

SETUP

OSD Language

TT Language

Audio Languages

Subtitle Language

Hearing Impaired

PVR File System

Aspect Ratio

Blue Screen

First Time Installation

Reset

Software Update(USB)

English

West

English

Swedish

Off

Auto

On

SETUP

OSD Language

TT Language

Audio Languages

Subtitle Language

Hearing Impaired

PVR File System

Aspect Ratio

Blue Screen

First Time Installation

Reset

Software Update(USB)

English

West

English

Swedish

Off

Auto

On

Audio Language

Dansk

English

L

Français

Italiano

Deutsch

Español

Primary

Portugues

MENU

Back

OK

Select

Audio Language

Dansk

English

L

Français

Italiano

Deutsch

Español

Portugues

MENU

Back

OK

Select

Secondary

English Svenska Norsk

15

Customizing TV Settings

Subtitle language

Allows you to select your preferred subtitle language .

1. Press the MENU button to display the main menu and then use the  buttons to select SETUP in

the main menu and then press the  or OK button, it will highlight the ﬁrst option.

2. Press the  buttons to select Subtitle Language, and then press OK or  button to enter to

Primary sub-menu (press  button again to enter to Secondary sub-menu).

3. Press the   buttons to select the language you want, then press the OK button to conﬁrm

and back to the SETUP menu.

Hearing Impaired

Allows you to set hearing impaired function ON/OFF.

1. Press the MENU button to display the main menu and

then use the  buttons to select SETUP in the main

menu and then press the  or OK button, it will highlight

the ﬁrst option.

2. Press the  buttons to select Hearing Impaired, and

then press OK or  button to enter to select On/Off.

3. Press the MENU button to return back to the SETUP

menu.

PVR File System

Allows you to select your preferences in the PVR File System.

1. Press the MENU button to display the main menu and then use

the  buttons to select SETUP in the main menu and then

press the  or OK button, it will highlight the ﬁrst option.

2. Press the  buttons to select PVR File System, and then

press the OK button to enter sub-menu.

Select Disk Select the disk where you want to store your recorded content.

Check PVR File System Check your USB device’s suitability for PVR.

USB Disk If no USB storage device is connected, it will show “No USB Disk”. If

the Check PVR File System has a “SUCCESS” it will show “Pass”.

Format Format your connected USB storage device.

Time Shift Size Select your preferred ﬁle size.

Speed This shows you the transfer rate of your USB storage device.

Free Record Limit Set the recording time limit from 1-6 hours.

3. Press the MENU button to return back to the SETUP menu.

SETUP

OSD Language

TT Language

Audio Languages

Subtitle Language

Hearing Impaired

PVR File System

Aspect Ratio

Blue Screen

First Time Installation

Reset

Software Update(USB)

English

West

English

Swedish

Off

Auto

On

Check PVR File System

USB Disk

Format

Time Shift Size

Speed

Free Record Limit

MENU

Back

OK

Select

Select Disk

Start

6 Hr.

C:

English Svenska Norsk

16

Customizing TV Settings

Aspect Ratio

Allows you to watch the screen in various picture formats. For ATV Mode, Auto / 4:3 / 16:9 / Zoom1 /

Zoom2 are the available options. For DTV mode, Auto / 4:3 / 16:9 / Zoom1 /Zoom2 are the available

options.

1. Press the MENU button and then use the  buttons to select the SETUP menu.

2. Press the  buttons to select Aspect Ratio, press the OK or  button to enter to Primary sub-

menu.

3. Press the  buttons to select.

Auto

When your TV receives a 4:3 or

16:9 signal it will automatically

change to the picture format

broadcast.

16:9

You can view a picture format

of 16:9 or a general TV pro-

gramme in the 16:9 mode.

The 16:9 screen is viewed in

the same way as in 4:3, but is

magniﬁed to the left and right.

Zoom 1

This selection will allow you

to view the picture without

any alteration, while ﬁlling the

entire screen. However, the

top and bottom of the picture

will be zoom out.

Zoom 2

This selection will allow you to

view the picture without any

alteration, while ﬁlling the entire

screen. However, the left side

and right side of the picture will

be zoom out.

4:3

This selection will allow you to

view a picture with an original

4:3 aspect ratio, black bars

will appear on both the left and

right of the screen.

English Svenska Norsk

17

Customizing TV Settings

Blue Screen

Allows the blue background to turn On or Off during weak or no signal conditions.

1. Press the MENU button to display the main menu and then use

the  buttons to select SETUP in the main menu and then

press the  or OK button. It will highlight the ﬁrst option.

2. Press the  buttons to select Blue Screen.

3. Press the MENU button to save the setting and return back to

the previous menu.

4. Press the EXIT button to exit the menu.

First Time Installation

Allows you to set up your TV if you have not previously done so or if you have moved to a new house.

1.

Press the MENU button to display the main menu and then use

the  buttons to select SETUP in the main menu and then

press the  or OK button, it will highlight the ﬁrst option.

2. Press the  buttons to select First Time Installation, then

press the OK or  button.

3. Press   to navigate the menu and change the settings.

Slect OSD Language and the country where you will operate

the TV. Then it will search automatically for analogue and digital

TV programmes.

If you stop the tuning before it has ﬁnished, the TV will report it as a no signal error. This is

normal because all previous channel memory has been cleared before tuning is carried out.

Reset

Restores all settings to factory defaults.

1. Press the MENU button to display the main menu and then use

the  buttons to select SETUP in the main menu and then

press the  or OK button

2. Press the  buttons to select Reset, and then press  or the

OK button.

3. Press   buttons to select Yes or No on the screen. All settings will be reset to factory defaults

and the SETUP menu will disappear

SETUP

OSD Language

TT Language

Audio Languages

Subtitle Language

Hearing Impaired

PVR File System

Aspect Ratio

Blue Screen

First Time Installation

Reset

Software Update(USB)

English

West

English

Swedish

Off

Auto

On

SETUP

OSD Language

TT Language

Audio Languages

Subtitle Language

Hearing Impaired

PVR File System

Aspect Ratio

Blue Screen

First Time Installation

Reset

Software Update(USB)

English

West

English

Swedish

Off

Auto

On

SETUP

OSD Language

TT Language

Audio Languages

Subtitle Language

Hearing Impaired

PVR File System

Aspect Ratio

Blue Screen

First Time Installation

Reset

Software Update(USB)

English

West

English

Swedish

Off

Auto

On

English Svenska Norsk

18

Customizing TV Settings

Time Zone

Allows you to select the Time Zone according to TV:s allocation.

1. Press the MENU button to display the main menu

and then use the  buttons to select TIME in the

main menu and then press the  or OK button. It will

highlight the ﬁrst option.

2. Press the  buttons to select Time Zone, and

then press the OK or  button.

3. Press   buttons to select .

4.

Press the OK button to save the setting and return back

to the previous menu.

5. Press the EXIT button to exit the menu.

Sleep Timer

The sleep timer automatically switches the TV to standby

after the preset time has elapsed.

The clock will be set automatically when

receiving a digital signal. Time must be set

before using Sleep Timer / OSD Timer function.

1. Press the MENU button to display the main menu and

then use the  buttons to select TIME in the main menu and then press the OK button.

2. Press the  buttons to select Sleep Timer, and then press  buttons.

3. Press the  buttons to select (Available time is Off/10/20/30/60/120/180/240 min) The timer

begins to count down from the number of minutes selected.

4. Press the OK button to save the setting and return back to the previous menu.

5. Press the EXIT button to exit the menu.

Alternative

1. You may press the SLEEP button repeatedly to select the number of minutes:

Off/10/20/30/60/120/180/240 min.

2. To cancel the sleep time, press the SLEEP button repeatedly until Off appears

If you turn the TV off after setting the sleep timer, the sleep timer setting will be erased.

TIME

Auto Standby 4 H

OSD Timer 10 S

Sleep TimerO f

Clock -- -- -- --

f

Timer Zone GMT+1

TIME

Auto Standby 4 H

OSD Timer 10 S

Sleep TimerO f

Clock -- -- -- --

f

Timer Zone GMT+1

English Svenska Norsk

19

Customizing TV Settings

Auto Standby

Allows you to set TV automatically enter stadby mode if no button has been pressed.

1.

Press the MENU button to display the main menu and

then use the  buttons to select SETUP in the main

menu and then press the  or OK button.

2. Press the  buttons to select Auto Standby and

then press the  buttons.

3. Press the  buttons to select ( Available is

Off/3H/4H/5H)

4. Press the OK button to save the setting and return back

to the previous menu.

5. Press the EXIT button to exit the menu.

OSD Timer

Allows you to select the display time of the on-screen menu.

1.

Press the MENU button to display the main menu and

then use the  buttons to select SETUP in the main

menu and then press the  or OK button.

2. Press the  buttons to select OSD Timer and then

press the  buttons.

3. Press the  buttons to select time: 5/10/15/20/30

sec.

4. Press the OK button to save the setting and return back

to the previous menu

5. Press the EXIT button to exit the menu.

TIME

OSD Timer 10 S

Sleep TimerO f

Clock -- -- -- --

f

Timer Zone GMT+1

Auto Standby4 H

TIME

OSD Timer 10 S

Sleep TimerO f

Clock -- -- -- --

f

Timer Zone GMT+1

Auto Standby4 H

English Svenska Norsk

20

Customizing TV Settings

Customizing the LOCK settings

To access the LOCK menu, you must enter the password. Enter the default password “0000” for ﬁrst time

use. To change the password, please refer to the section “Set password” in this user manual.

Lock System

The Lock System is designed to prevent accidental retuning of the TV /

losing channels and prevent children watching unsuitable programmes.

The Lock System must be set to On for this function to operate. If the

Lock System is set to On, a valid password must be entered when you

access Auto Tuning / Manual Tuning / Restore Factory Default.

1. Press the MENU button and then press the  buttons to select

the LOCK menu and then press the OK button.

2. Press the  buttons to select Lock System and then press the

OK button.

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK

menu

The default password is “0000”.

If you change the password, be sure to

remember the new password! If you forget

the new password, press the master pass-

word“8899”.

4. Press the  buttons to select Lock System and then press the

OK button to select On/Off

If the Lock System is set to On, a valid password must be entered when you access Auto Tuning /

Manual Tuning / Programme Edit / First Time Installation / Restore Factory Default.

5. Press the EXIT button to exit the menu.

Set Password

1.

Press the MENU button to display the main menu and then use the 

buttons to select LOCK menu and then press the OK button.

2. Press the  buttons to select Set Password and then press the

OK button.

3. Use the 0-9 buttons to input the old password and then input the new

4-digit password. Re-enter new password for conﬁrmation.

4. Press the MENU button to return to the previous menu.

The default password is “0000”.

If you change the password, be sure to

remember the new password! If you forget

the new password, press the master pass-

word“8899”.

5. Press the EXIT button to exit the menu.

LOCK

Lock System O ff

Set Password

Block Program

Parental Guidance Off

Key Lock Off

LOCK

Lock System O ff

Set Password

Block Program

Parental Guidance Off

Key Lock Off

LOCK

Set Password

Block Program

Parental Guidance Off

Key Lock Off

Lock System On

Please enter password

Please enter old passwor d

Please enter new passwor d

Confirm new password

Clear

Cancel

Sidan laddas ...

Andersson L48510 Användarmanual

Denna manual är också lämplig för

Andersson L48510 Användarmanual

på andra språk

Relaterade papper

Andra dokument