Andersson LED22010FHD PVR Användarmanual

varumärke: Andersson

Modell: LED22010FHD PVR

Kategori: Kompletterande musikutrustning

Typ: Användarmanual

LED22010FHD PVR | 22 inch LED-TV

User manual

English | Svenska | Norsk

Content / Innehåll / Innhold

English

Caution .............................................................................................................................. 4

Safety Information ............................................................................................................ 5-8

Product Introduction ............................................................................................................9

Connections ........................................................................................................................10

Remote Control ............................................................................................................ 11-12

Basic Operation ..................................................................................................................13

OSD Menu..................................................................................................................... 14-21

Multimedia Operation ................................................................................................... 22-25

Recording Operation ................................................................................................... 26-28

Maintenance and Service ............................................................................................. 29-31

Svenska

Varning ..............................................................................................................................33

Säkerhetsföreskrifter .................................................................................................. 34-37

Produktintroduktion ............................................................................................................38

Baksidans anslutningar ......................................................................................................39

Fjärrkontroll ................................................................................................................. 40-41

Grundfunktioner ..................................................................................................................42

OSD-meny.................................................................................................................... 43-50

Använda multimedia..................................................................................................... 51-54

Inspelning .................................................................................................................... 55-57

Användning och underhåll............................................................................................ 58-60

Norsk

Forsiktig ..............................................................................................................................62

Sikkerhetsinformasjon .................................................................................................. 63-66

Presentasjon av produktet...................................................................................................67

Tilkoblinger ........................................................................................................................68

Fjernkontroll ................................................................................................................. 69-70

Grunnleggende bruk............................................................................................................71

OSD-meny.................................................................................................................... 72-79

Bruk av multimedia ..................................................................................................... 80-83

Opptak.......................................................................................................................... 84-86

Vedlikehold og service.................................................................................................. 87-89

Caution

intended to alert the user to the presence of un-insulated “dangerous voltage”

a risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING

TO PREVENT DAMAGE WHICH MAY RESULT

IN FIRE OR ELECTRIC SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

Correct Disposal of this Product

Waste of Electrical and Electronic Equipment (WEEE)

Your product is designed and manufactured with high quality materials and

components which can be recycled and reused. Electronic products can be

harmful to the environment and must therefore be disposed of separately from

other household waste in order to reduce damage to the environment. Batteries

must be disposed of in special containers for battery disposal. The EU has

separate waste collection systems, contact your local dealer or authority for

more information.

This unit complies with European safety and electrical interference directives.

This product has been manufactured according to current regulations for

according to safety instructions.

The product is manufactured according to current regulations within the EU

legislation, limiting the use of hazardous substances in electrical and electronic

equipment (RoHS Directive 2011/65/EU).

Safety Information

The purpose of these precautions

is to ensure user safety and

prevent property damage.

Be sure to read and

observe all safety

precautions.

The following precautions are divided into

“Warnings“ and “Cautions“.

Warning: Ignoring this precaution may result

in death or serious injury.

Caution: Ignoring this precaution may result

in injury or property damage.

1. Read these instructions.

2. Keep these instructions.

3. Follow all instructions.

4. Heed all warnings.

5. The appliance is only for domestic use.

6. Do not use this apparatus near water.

7. Clean only with a dry cloth.

8. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s

instructions.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other

10. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong is provided for your safety. When the

outlet.

11. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

12.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14.

been damaged in any way, such as power supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15.

as vases, shall be placed on the apparatus.

16. , or sold with

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

Safety Information

Warnings

Cautions

Do not touch the power

plug with wet hands.

Doing so may result in

electric shock.

Do not use a damaged

power cord or plug or

a loose outlet. Doing

electric shock.

Do not plug several

devices into the same

outlet. Doing so may

cause the outlet to

Insert the power plug

fully into the outlet. A

loose or improperly

inserted power plug

Do not bend the power

cord excessively or place

heavy objects on it. Doing

electric shock.

When disconnecting the power cord from an AC

outlet, always grasp it by the plug. Pulling on the

cord can damage the internal wire and may result

Always unplug the unit before cleaning. Not

Safety Information

Warnings

Do not place containers

vases, soft drink cans, or

medicine bottles or small

metallic objects on top of

the unit. If liquid enters the

unit or any metal object

falls into the unit, it may

or electric shock.

Do not place the unit

where it is exposed to

rain, excessive moisture

or grease. Doing so may

shock, malfunction, or

deformation.

Do not use or store

materials near the unit.

or exlosion.

Do not place the unit on an

unstable surface, such as

a wobbly stand or sloped

table, or on any surface

whose area is smaller than

the bottom area of the unit.

If a child climbs on the

unit it could topple and fall

onto the child, resulting in

serious injury to the child or

damage to the unit.

Place the unit

surface.

Do not place a burning

candle, burning

anti-mosquito incense,

or lighted cigarette on top

of the unit. Do not place

the unit near any heat

or space heater. Doing

so poses a serious risk

Do not place the unit

in a poorly ventilated

enclosure, such as a

cabinet. Doing so poses a

Do not run power cords

near head-producing

appliances such as

radiators, stoves, or

irons. The excessive heat

could melt the insulation

and expose live wires,

shock.

Install the antenna away

from high-voltage power

lines and communication

cables and make sure

it is installed securely. If

the antenna touches a

power line, contact with

the antenna could result

serious injury, or death.

Cautions

Install the unit at an

adequate distance

from the wall to ensure

the temperature inside

the unit rises, it may result

Do not cover the unit

with a tablecloth, curtain,

or other material. If the

temperature inside the

unit rises, it may result in

Be sure to place the unit

on a level surface.

Form a drip loop where

the coaxial antenna cable

enters your building to

prevent rainwater from

travelling along the cable

and coming in contact with

the antenna input terminal.

inside the unit, it may result

WARNING

Safety Information

Warnings

Disconnect the power cord

from the wall outlet during a

lightning storm. Not doing so

shock.

Do not insert any metal

objects, such as a

screwdriver, paper clip,

or bent wire into the

ventilation openings or

A/V terminals. Doing so

poses a serious risk of

Do not allow children to

climb or hang on the unit.

The unit could topple

over onto a child and

result in serious injury.

Never disassemble or

modify the unit in any

way. Do not attempt to

service the unit yourself.

Doing so may result in

the unit requires repair,

contact the service

center.

Caution

When not using the unit

for long periods of time,

disconnect the power cord

from the wall outlet. Dust

could accumulate over time

on the unit and cause it to

generate heat and ignite,

or deteriorate insulation,

which in turn may result in

When moving the unit, be

sure to turn off the unit

and unplug the power

cord from the wall outlet.

Moving the unit with the

power cord connected

to the outlet may cause

damage to the cord,

shock.

If you notice any unusual

odors or smoke around

the unit, immediately

disconnect the unit from

the outlet and contact the

service center. Failure to

electric shock.

When removing the

batteries from the remote

control, make sure children

do not swallow them. Keep

the batteries out of reach

of infants and children.

If a child has swallowed

a battery, seek medical

attention immediately.

Always use two or more

people to lift or move the

unit. If the unit is dropped,

it could be damaged or

otherwise cause injury.

Wipe off any moisture,

dirt, or dust on the power

plug pins with a clean

dry cloth. Failure to do

electric shock.

It is advisable to clean

the interior of the unit at

least once a year. Contact

the store of purchase

or service center for

information. Continuing

to use the unit without

cleaning off the dust built-

or electric shock.

Always turn off the unit

and unplug the power cord

when cleaning the unit. Use

a soft dry cloth to clean it.

Never clean with industrial

strength polish wax,

benzene, paint thinner,

air freshener, lubricant,

detergent, or other such

chemicals. Also, do not

clean with a damp cloth.

WARNING

Product Introduction

Accessories

Remote Control Receiver (IR)

(keep clear)

LED Indicator

SOURCE

Display the input source menu.

Display/exit the OSD menu.

CH+/-

Step through channels.

VOL+/-

Adjust the volume.

POWER

Turn on/standby the TV set.

Infrared Receiver (IR): Receives IR signals from the remote control.

The effective receiving range for the signal is 5-8 meters from the front of the remote control

window, and 30° to the left or right side and 20° above or below the control window.

LED Indicator (Power on/Standby): Press POWER to turn on and off.

Indicator on (red) Standby mode

Indicator on (green) Power on mode

Instruction Manual

Remote Control

(model: E-37)

The configuration of the components may look different from the following illustrations.

Mini YPbPr Cable

Mini AV Cable

SOURCE

Headphone:

Connect it to your headphone or other audio equipment.

HDMI: Connect them to the HDMI of DVD player or other equipment.

SCART: Connect it to the SCART video output terminal of DVD (used in component source).

MINI AV: Connect it to the audio & video output terminals of DVD with the converter cable

(audio terminals are shared with YPbPr).

MINI YPbPr: Connect it to the YPbPr video output terminal of DVD (used in component source).

COAX: Digital coaxial output.

USB: Media and PVR (USB jack for update).

VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC.

PC -IN: Connect it to the audio output terminal of PC.

RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.

Common Interface: CI slot.

POWER: Connect to the power supply with the mains adaptor.

USB

RF Common Interface

MINI

Connections

CA module must be installed with

Boxer/RiksTV logo away from your

TV. The smart card must be installed

as shown below.

Headphone out

COAX

POWER HDMI

VGA PC-IN

SCART

MINI

YPbPr

MUTE: Press to mute the sound, press again or press

VOL+ to unmute.

CURSOR KEYS OK/ENTER

NUMBER BUTTONS

Press0-9 to select a TV channel directly when you

are watching TV.

Return to the previous channel viewed.

POWER: Turnthe TV on/standby.

SOURCE: Press to display the input source menu.

ASPECT: Change the screen display mode.

P.MODE: Press to cycle through the different picture settings.

S.MODE: Press to cycle through the different sound settings.

Allows you to navigate the on-screen menus and adjust the

system settings to your preference.

MENU: System setup menu.

EXIT: Exit the OSD menu.

Colour buttons:Short cuts-follow the coloured links in the text.

INFO Means information, to display brief information concerning

the current channel or disc you are wathching.

CH +/- : Scan through channels.

VOL+/- : Adjust the volume.

EPG: To show the Electronic Program Guide during no-menu

state only in DTV mode.

SLEEP: Standby timer.

Remote Control

The remote control is using Infrared (IR). Point it towards the front of the TV. The remote control

may not work correctly if it is operated out of range or out of angle.

TV/RADIO: To switch to TV or Radio state in DTV mode.

FAV: Display the favorite program list.

CH.LIST: Display the channel list.

REC : Press to start record the program in DTV mode.

SUBTITLE: Turn the subtitle display on/off in DTV mode.

: Fast reverse.

: Fast forward.

: Previous chapter.

: Next chapter.

: Stop program.

: Play/Pause program.

REC.LIST: Record List.

TV/TXT: Turn off/on the Teletext display.

CANCEL: Cancel the Teletext display.

REVEAL: Reveal any hidden text.

NICAM/A2: TV Nicam/A2 select.

INDEX: Go to index.

HOLD: Hold or carry on the current subpage.

SIZE: Press to see top half of page double size,

Press again to see the bottom

half of page double size. Press again for normal size.

SUBPAGE: Press to enter subpages, pressagain to cancel.

Remote Control

Basic Operation

Power on/off

1. Connect to the power supply with the power cord.

2. To turn on the TV, press POWER button on the TV or remote control.

To turn off the TV, press POWER button on the TV or remote control.

Input Source Select

Press SOURCE button on the TV set or remote control to display the

input source menu, and use CH+/- button on the TV set or button

on remote control to select the input source. Press OK button on the

remote control to enter.

Ĥ0ĥ!

Note: Before you select the input source, make sure the connections

are prepared.

Basic OSD Menu Operation

Main menu: Picture Sound Channel Feature Setup

Submenu

(picture menu

for example)

Hint: You should operate

the OSD menu according

to the hint.

Press MENU button to display the OSD menu as below:

Use button to select the main menu, and press > / OK button to enter the submenu.

In the submenu, use button to select the function item, press > / OK button to enter

the setup menu, then press </> button to adjust, or press to select and press OK /

</> button to confirm.

Ĥĥ

• Press MENU / < button to return to the upper menu.

• Press EXIT button to exit the menu display.

Note:

a) Only when you input the suitable signal, the relevant items can be activated.

b) Please operate the OSD menu according to hint on the bottom of the banner.

DTV

YPBPR

SCART

HDMI

ATV

Media

OSD Menu

1. Picture Menu

Description

Picture Mode: Select your desired picture mode from Dynamic, Standard, Mild and User.

Brightness: Adjust image brightness level.

Contrast: Adjust image contrast.

Sharpness*: Adjust the sharpness (cannot be changed in VGA/PC mode).

Colour: Adjust image colour from black and white.

Tint: Control the tint in NTSC mode (only in USA).

Colour Temp.: Select an optimum color temperature mode to suit your eyes for viewing from

Warm, Cool, Standard.

Aspect Ratio: Change the aspect for the screen from 4:3,16:9, Zoom1, Zoom2 or Panorama etc.

Noise Reduction: If the broadcast signal received is weak, you can select the Noise Reduction

option to reduce the video noise level between Off, Low, Middle and High.

* When background is grey it is not changeable. Some adjustments are subject to selected

source. If selected source is not compatible then background will be grey and cannot be

adjusted.

OSD Menu

2. Sound Menu

Description

Sound Mode: Select your desired sound mode from Standard, Movie, Music, Speech and User.

Bass: Adjust the level of the lower-pitched sounds.

Treble: Adjust the level of the higher-pitched sounds.

Balance: Adjust the audio output between left and right speakers.

Surround: Turn on/off the surround sound function.

Auto Volume Level (AVL): The volumes of all sources will be maintained when the function's on.

SPDIF: Select the SPDIF mode (off, PCM or Auto) when connected to audio system with

coaxial digital input.

Lock: You must set the “Lock enable” (Feature-Lock-Lock enable) at ON to active this function.

Press GREEN button to sign (lock) or cancel (unlock) the channel. And you have to enter the

password to view the program.

Delete: Press RED button to sign the channels you want to delete, it will hint you when you exit.

Skip: Press YELLOW button to skip the channel or cancel the setting, and the program will not

be programmed by CH+/- button.

Move: Press BLUE button to sign the channel, press / button to move, and press OK button

to confirm.

OSD Menu

3. Channel Menu (in ATV/DTV mode)

Description

Channel Management: Enter the Channel Management menu to edit the channels.

Move

DTV Manual Search: Enter the DTV Manual Search menu.

Press button to highlight “Channel” and press < / > button to select channel no.

Then press button to highlight “Start” and press < / > button to start manual search.

OSD Menu

Country: Select the country.

Auto Search: Press OK button to enter the Auto Search menu, select search mode, and press

OK button to start auto search.

Note:

1. ALL: Auto search channels for DTV, ATV

and Radio.

DTV: Auto search channels for DTV and Radio.

ATV: Auto search channels for ATV.

2. When the TV is auto tuning, you can press

MENU button to stop auto tuning and return

to previous menu.

When the Child Lock is activated, please enter the Password (Lock Password in Feature Menu) to start

Auto and Manual Search.

DVB-C

DVB-T

Favorite Management: Add or remove favorite

channels by the colour buttons. Up to 4 favorite

lists are available, RED-Fav1, GREEN-Fav2,

YELLOW-Fav3, BLUE-Fav4.

OSD Menu

ATV Manual Search: Enter the ATV Manual Search menu.

Current Channel: Select the Current Channel for manual searching.

Search: Press OK button to enter the Search menu, and manually

search the frequency by < / > button.

Fine Tune: Press OK button to enter the Fine Tune menu, and fine

tune the frequency by < / > button.

Color/Sound System: Select the Color/Sound System for the program.

OSD Menu

4. Feature Menu

Description

Lock: This menu allows you to lock certain features of the television so that they cannot be

used or viewed. For example if you do not want certain channels viewed by children or if the

television is to be used in a hotel and you want certain channels locked. When you enter the

system lock menu you will be asked for a password. As default it is 0000.

Lock Enable: Turn on/off the Lock functions.

Note: When it is turned on, the functions of Parental Guidance and Change Pin Code

below will be locked. The Functions Lock, Auto Search, DTV Manual Search, ATV

Manual Search in Channel Menu will also be locked.

Parental Guidance: Select the Parental Guidance mode, or turn off the function.

Change Pin Code: Press OK button to enter. First enter the current code, then enter

your new code and confirm your new code.

OSD Menu

Language: Lets you adjust the different language options available.

Clock: Allows you to set the clock (as default the information is taken automatically from

the digital signal).

Sleep Timer: Lets you set the sleep timer so the television automatically switches off after

a certain amount of time.

Auto Power Off: The TV will switch off by itself automatically if no change in status within

the time you select. You can choose 1H, 2H, 4H or off.

Hearing Impaired: You can switch on the hearing impaired feature, this provides additional

information and subtitles.

CI Info: Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe

to a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM

can then be inserted into the Common Interface Port (CI Card In).

PVR/Timeshift: Setup menu for recording, please see the Recording Operation section.

Hotel Mode: Enter the Hotel Setting menu.

Hotel Lock: Turn on/off the Hotel Lock function.

Channel Lock: Disable/enable the Channel Menu in OSD.

Picture Lock: Disable/enable the Picture Menu in OSD.

Sound Lock: Disable/enable the Sound Menu in OSD.

Feature Lock: Disable/enable the Feature Menu in OSD.

Setup Lock: Disable/enable the Setup Menu in OSD.

Key Lock: Disable/enable the buttons on the TV set.

Source Lock: Disable/enable the input source you desired.

Set Source: Select the default source when you turn on the TV.

Channel Number: Select the default channel number when

you turn on the TV.

Max Volume: Set the max volume for the TV.

Default Volume: Set the default volume when the program is on.

Clear Lock: Clear all the locks above, which means to set all the

locks to OFF and max volume to 100.

Database Export: Export all Hotel Settings to the USB device.

Database Import: Import all Hotel Settings from the USB device.

Sidan laddas ...

Andersson LED22010FHD PVR Användarmanual

varumärke: Andersson

Modell: LED22010FHD PVR

Kategori: Kompletterande musikutrustning

Typ: Användarmanual

Ladda ner pdf

Rapportera

på andra språk

English: Andersson LED22010FHD PVR User manual

Andersson LED22010FHD PVR Användarmanual

Andersson LED22010FHD PVR Användarmanual

på andra språk

Relaterade papper

Andra dokument