BEHA AMPROBE Beha-Amprobe AM-520-EUR Digital Multimeter Användarmanual

AM-520-EUR

AM-530-EUR

Digital Multimeter

User Manual

EN FR DE IT

PL SV

NO FI PT DA

ES DU

https://manual-hub.com/

AM-520-EUR

AM-530-EUR

Digital Multimeter

User Manual

10/2017, Rev.4

English

https://manual-hub.com/

Limited Warranty and Limitation of Liability

Your Beha-Amprobe product will be free from defects in material and workmanship for

three years from the date of purchase unless local laws require otherwise. This warranty does

not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration,

contamination, or abnormal conditions of operation or handling. Resellers are not authorized

to extend any other warranty on the behalf of Beha-Amprobe. To obtain service during the

warranty period, return the product with proof of purchase to an authorized Beha-Amprobe

Service Center or to an Beha-Amprobe dealer or distributor. See Repair Section for details. THIS

WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED

OR STATUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE

OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR

ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM

ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation

of an implied warranty or of incidental or consequential damages, this limitation of liability may

not apply to you.

Repair

All Beha-Amprobe tools returned for warranty or non-warranty repair or for calibration should

be accompanied by the following: your name, company’s name, address, telephone number, and

proof of purchase. Additionally, please include a brief description of the problem or the service

requested and include the test leads with the meter. Non-warranty repair or replacement charges

should be remitted in the form of a check, a money order, credit card with expiration date, or a

purchase order made payable to Beha-Amprobe.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair. During the

warranty period, any defective test tool can be returned to your Amprobe distributor for an exchange

for the same or like product. Please check the “Where to Buy” section on amprobe.com for a list

of distributors near you. Additionally, in the United States and Canada, in-warranty repair and

replacement units can also be sent to an Amprobe Service Center (see address below).

Non-warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Beha-Amprobe distributor for a nominal

charge. Please check the “Where to Buy” section on beha-amprobe.com for a list of distributors

near you.

Beha-Amprobe

Division and reg. trademark of Fluke Corp. (USA)

Germany* United Kingdom The Netherlands - Headquarters**

In den Engematten 14 52 Hurricane Way Science Park Eindhoven 5110

79286 Glottertal Norwich, Norfolk 5692 EC Son

Germany NR6 6JB United Kingdom The Netherlands

Phone: +49 (0) 7684 8009 - 0 Phone: +44 (0) 1603 25 6662 Phone: +31 (0) 40 267 51 00

beha-amprobe.de beha-amprobe.com beha-amprobe.com

*(Correspondence only – no repair or replacement available from this address. European customers please

contact your distributor.)

**single contact address in EEA Fluke Europe BV

https://manual-hub.com/

AM-520-EUR / AM-530-EUR Digital Multimeter

1 Flash light

2 LCD Display

3 Function Buttons

4 Flash light Button

5 Rotary Switch

6 SELECT Button

7 Input Terminal for voltage, diode, capacitance,

Resistance, continuity and temperature measurement

8 COM (return) terminal for all measurements

9 Input Terminal for AC/DC mA/uA measurement

10 Input Terminal for AC/DC A measurement to10A

1

2

7

8

3

4

5

9

10

6

https://manual-hub.com/

Screen Display

1 The Meter selects the range with best resolution

2 Direct Current

3 Negative reading

4 Alternate Current

5 Low battery indicator

6 Data hold

7 Diode test

8 Continuity test

9 Relative zero mode

10 Non-Contact Voltage

11 Measurement units for Resistance

12 Measurement units for Frequency

13 Measurement units for Voltage

14 Measurement units for Current

15 Measurement units for Capacitance

16 Auto Power Off

17 Maximum / minimum reading memory

18 Measurement unit for Temperature

19 Analog bar graph display

1

2

9

6 8 7

3

4

5

10 13 14 1517

18

12

11

19

16

https://manual-hub.com/

1

AM-520-EUR / AM-530-EUR Digital Multimeter

CONTENTS

SYMBOL .................................................................................................................2

SAFETY INFORMATION .........................................................................................2

UNPACKING AND INSPECTION .............................................................................3

FEATURES ...............................................................................................................4

MAKING MEASUREMENT .....................................................................................5

Measuring AC and DC Voltage .........................................................................6

Measuring AC and DC Current .........................................................................7

Measuring Resistance .......................................................................................8

Measuring Continuity .......................................................................................9

Measuring Diode ...............................................................................................9

Measuring Capacitance ....................................................................................10

Measuring Frequency .......................................................................................10

Measuring Temperature °C /°F .........................................................................11

Non-Contact Voltage Sensing ..........................................................................12

SPECIFICATION .......................................................................................................13

MAINTENANCE ......................................................................................................16

BATTERY AND FUSE REPLACEMENT .....................................................................17

https://manual-hub.com/

2

SYMBOLS

Caution ! Risk of electric shock.

Caution! Refer to the explanation in this Manual

Alternating Current (AC)

Direct Current (DC)

The equipment is protected by double insulation or reinforced

insulation

Earth (Ground)

Audible tone

Battery

Complies with European Directives

Conforms to relevant Australian standards

Canadian Standards Association (NRTL/C)

Do not dispose of this product as unsorted municipal waste.

Contact a qualified recycler.



SAFETY INFORMATION

The Meter complies with:

IEC/EN 61010-1 3rd Edition, UL61010-1 2nd Ed. and CAN/CSA C22.2 No.

61010.1-0.92 to Category III 600 Volts, Pollution degree 2

IEC/EN 61010-2-030

IEC/EN 61010-2-31 for test leads

EMC IEC/EN 61326-1

Measurement Category III (CAT III) is for measurements performed in the

building installation. Examples are measurements on distribution boards,

circuit- breakers, wiring, including cables, bus-bars, junction boxes, switches,

socket-outlets in the fixed installation, and equipment for industrial use

and some other equipment, for example, stationary motors with permanent

connection to the fixed installation.

https://manual-hub.com/

3

Measurement Category II (CAT II) iis for measurements performed on circuit

directly connected to low voltage installation. Examples are measurements on

household appliances, portable tools and similar equipments.

Warning: Read Before Using

• To avoid possible electrical shock or personal injury, follow these

instructions and use the Meter only as specified in this manual.

• Do not use the Meter or test leads if they appear damaged, or if the

Meter is not operating properly. If in doubt, have the Meter serviced.

• Always use the proper function and range for measurements.

• Before rotating the function range selection switch, disconnect test

probe from circuit under test.

• Verify the Meter’s operation by measuring on a known voltage source.

• Do not apply more than the rated voltage, as marked on the Meter,

between the test probe or between any test probe and earth ground.

• Use the Meter with caution for voltages above 30 Vac rms, 42 Vac peak,

or 60 Vdc. These voltages pose electrical shock hazards.

• Disconnect circuit power and discharge all high-voltage capacitors before

testing resistance.

• Do not use the Meter around explosive gas or vapor.

• When using the test leads, keep your fingers behind the finger guards.

• Remove test leads from the Meter before opening the Meter case or

battery door.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 AM-520-EUR or AM-530-EUR

1 Pair of test leads

1 Temperature probe

1 Velcro strap

1 9V (6F22) battery (installed)

1 User manual

1 Carrying case

If any of the items are damaged or missing, return the complete package to

the place of purchase for an exchange.

https://manual-hub.com/

4

FEATURES

AM-520-EUR is designed for HVAC applications with key functions such as

temperature, micro amps used for flame sensor troubleshooting, as well as and

capacitance to check the motor startup capacitors. The AM-520-EUR measures

a complete range of electrical parameters and features a built in flashlight, a

“third hand” probe holder and VoltTect non-contact voltage detection. Safety

rated to CAT III 600V.

AM-530-EUR is the fully-featured multimeter of choice for the professional

electrical contractor. Measure and verify presence of voltage in order to

connect equipment or to perform repairs, run new wiring, check continuity

of electrical connections, identify blown fuses, troubleshoot motors or check

transformers. The AM-530-EUR features Truerms sensing to accurately measure

voltage on systems affected by harmonics, a built in flashlight to detect wire

colors in the dark, a “third hand” probe holder and non-contact voltage

detection. Safety rated to CAT III 600V.

• Measurements: Voltage up to 600VAC and 600VDC, AC/DC current,

Resistance, Frequency, Capacitance, Temperature.

• Frequency, Capacitance, Duty Cycle for troubleshooting applications

• Special Functions:

- Non-contact Voltage Detection

- Audible continuity

- Diode Test

• Backlit LCD display with analog bar graph

• Events:

- Data hold

- MAX / MIN Memory

- Relative zero mode

• Built in work light (flashlight)

• Built in test leads storage and “third hand holder”

• Auto and Manual ranging

• Auto power off

• Low battery warning

• Velcro strap to hang a meter

• Safety: CAT III 600V

https://manual-hub.com/

5

MAKING MEASUREMENT



1. Use the proper function and range for measurements.

2. To avoid possible electrical shock, personal injury or damages to the

Meter, disconnect circuit power and discharge all high-voltage capacitors

before testing resistance and diode.

3. Connecting test leads:

• Connect the common (COM) test lead to the circuit before connecting

the live lead;

• After measurement, remove live lead before removing the common

(COM) test lead from the circuit

4. Symbol “OL” is displayed on LCD when the measurement is out of range.

Rotary Switch Positions

Switch Position Measurement Function

V AC or DC voltage measurement (use SELECT button for

switching to AC or DC).

Resistance measurement

Voltage measurement of diode PN junction

Continuity measurement

Capacitance measurement

Hz Frequency measurement

°C °F Temperature measurement

NCV Non-contact voltage

μA mA A AC or DC current measurement (use SELECT button for

switching to AC or DC).

Function Buttons

Button Measurement Function

SELECT Switching AC or DC. Press the yellow SELECT button to select

alternate measurement functions on the rotary switch.

HOLD / Display freezes present reading / press 2 sec to turn on

LCD backlight.

https://manual-hub.com/

6

REL Relative zero mode

RANGE

Manual or Auto range switching. The default setting

is Auto ranging, press to switch to manual ranging

(selectable resolutions). Press for 2 sec to return to auto

ranging.

MAX/MIN Maximum / minimum reading memory.

Flash light

Press to enable the function when at relevant rotary switch function.

Auto Power OFF

Auto power off: approx. 15 minutes.

When the Meter is in auto power off mode, press any button to resume

normal operation.

Measuring AC and DC Voltage

Press SELECT button to select AC/DC voltage measurement function.

To avoid personal injury or damage to the Meter, do not apply

voltage higher than 600Vac and 600Vdc.

https://manual-hub.com/

7

Measuring AC and DC Current

Press SELECT button to select AC or DC current measurement function.

To avoid personal injury or damage to the Meter:

1. Do not attempt to make an in-circuit current measurement when the

open-circuit potential to earth ground exceeding AC 600V or DC 600V

2. Switch to proper function and range for your measurement.

3. Do not place the test probe in parallel with a circuit when the test leads

are connected to the current terminals.

4. Connect the test leads to the correct input A/mA μA current terminal and

to the circuit before powering the circuit under test.

5. For current range from 8-10A, do not measure current for more than 20

minutes. Wait for 10 minutes before taking another measurement

6. After measurement, switching OFF the circuit’s power before removing

test leads from the circuit.

https://manual-hub.com/

8

RL

Measuring Resistance

Disconnect circuit power and discharge all high-voltage capacitors

before testing resistance.

Note: On a higher resistance measurement (>1M), the measurement may

take a few seconds to get stable reading.

Over range or open circuit indication: OL

https://manual-hub.com/

9

Measuring Continuity

Disconnect circuit power and discharge all high-voltage capacitors

before testing continuity.

Measuring Diode

Disconnect circuit power and discharge all high-voltage capacitors

before testing diode.

https://manual-hub.com/

10

Measuring Capacitance

Disconnect circuit power and discharge all high-voltage capacitors

before testing capacitance.

Measuring Frequency

To avoid personal injury or damage to the Meter, do not apply

voltage higher than 600V.

https://manual-hub.com/

11

Measuring Temperature °C / °F



1. To avoid personal injury or damage to the Meter, do not apply

thetemperature probe to any live conductive parts.

2. Temperature sensor K type (nickel-chromium/nichrosi) thermocouple is

suitable for temperature measurement below 230°C (446°F).

Measurement steps:

Step 1: Turn the rotary switch to °C or °F position. The display will show “OL”.

Step 2: Connect the temperature probe (K type) to the Meter and to the

surface to be measured.

https://manual-hub.com/

12

Non-Contact Voltage Sensing

1. To avoid personal injury or damage to the Meter, do not test on un-

insulated high voltage wires.

2. Buzzer will sound and screen will display “OL” when sensing AC voltage

between 90V and 600V

3. Do not test on hazardous live wires higher than AC 600V

4. Before and after hazardous voltage measurements, test the Meter by

approaching to a known source such as a line AC voltage or outlet to

determine proper operation. See below figure.

Measuring distance

8mm

Buzzer will sound when the detected voltage is ≥90V, and the buzzer will be

on.The distances between the wire and the meter should be ≤8mm.



At NCV mode, LCD will display OL. No test lead connection are required for

NCV measurement.

https://manual-hub.com/

13

SPECIFICATION

Ambient temperature: 73.4°F ±9 (23°C ±5°C); Relative temperature: ≤75%

Accuracy: ±(% of reading + digits)

Maximum voltage between input terminal and earth ground: AC 600Vrms or

DC 600V

 Fuse for mA µA input: F1 fuse, 0.5A H 1000V fast-fuse, (6.3×32)mm

 Fuse for 10A input: F2 fuse, 11A H 1000V fast-fuse, (10×38)mm

Maximum display: Digital 3999 counts, updates 3/sec. Frequency: 9999 counts.

Analog pointer display: 41 segments, updates 30 times/sec.

Over-range indication: OL

Range: Automatic and Manual

Altitude: Operating 2000m

Operating temperature: 0°C ~ +40°C (32°F ~ 104°F)

Relative humidity: 0°C ~ +30°C (32°F ~ 86°F) ≤75%; +30°C ~ +40°C (86°F ~

104°F) ≤50%

Storage temperature: -10°C ~ +50°C (14°F ~ 122°F)

Electromagnetic compatibility: In an RF filed of 1V/m = Specified accuracy 5%

Battery: 9V, 6F22, NEDA1604 or equivalent

Low battery indication:

Dimensions (L x W x H): 182 mm x 90 mm x 45 mm (7.2 in x 3.5 in x 1.8 in)

Weight: Approx. 354g (0.78lb) with batteries installed

1. DC Voltage Measurement

Range Resolution Accuracy

400.0mV 0.1mV ± (0.8%+3LSD)

4.000V 1mV

± (0.8%+1LSD)40.00V 10mV

400.0V 100mV

600V 1V ±(1.0%+3LSD)

Input impedance: About 10M ;

(Input impedance is ≤3G except DC 400mV range)

Overload protection: ±600V

https://manual-hub.com/

14

2. AC Voltage Measurement

Range Resolution Accuracy

400.0mV 0.1mV ±(1.2%+3LSD)

4.000V 1mV

±(1.0%+3LSD)40.00V 10mV

400.0V 100mV

600V 1V ±(1.2%+3LSD)

Note: Manual range only for 400.0mV range.

Input impedance: Around 10MΩ

Frequency response: 45Hz ~ 400Hz

AM-520-EUR : Average sensing, rms indication.

AM-530-EUR: True RMS.

Overload protection: 600Vrms

3. Resistance Measurement

Range Resolution Accuracy

400.0Ω0.1Ω±(1.2%+2LSD)

4.000kΩ1Ω

±(1.0%+2LSD)40.00kΩ10Ω

400.0kΩ100Ω

4.000MΩ1kΩ±(1.2%+2LSD)

40.00MΩ10kΩ±(1.5%+5LSD)

400Ω range: Measured value = (Measured display value – Short-circuiting

value of probe)

Open circuit voltage: Around 0.5V

Overload protection: 600Vrms

4. : Circuit ON/OFF : Diode measurement

Range Resolution Accuracy

0.1Ω

Open circuit voltage is around 0.5V.

Resistance >150Ω, buzzer will not sound.

Resistance ≤10Ω, buzzer will sound.

https://manual-hub.com/

Sidan laddas...

BEHA AMPROBE Beha-Amprobe AM-520-EUR Digital Multimeter Användarmanual

BEHA AMPROBE Beha-Amprobe AM-520-EUR Digital Multimeter Användarmanual

på andra språk

Andra dokument