Yamaha ISX-18 Bruksanvisning

varumärke: Yamaha

Modell: ISX-18

Kategori: Väckarklockor

Typ: Bruksanvisning

Denna manual är också lämplig för

ISX-18D

OWNER’S MANUAL

UABGLVH

Before using this unit, be sure to read the “Safety Brochure” and “Quick Manual.”

IMPORTANT SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert you to the presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of

time.

14 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries Association’s Consumer Electronics

Group want you to get the most out of your equipment by playing it at a safe

level. One that lets the sound come through loud and clear without annoying

blaring or distortion – and, most importantly, without affecting your sensitive

hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and

the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets

FCC requirements. Modifications not expressly approved by Yamaha may void your authority,

granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to accessories and/or another product use only

high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void your FCC authorization to

use this product in the USA.

3NOTE: This product has been tested and found to comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements

provides a reasonable level of assurance that your use of this product in a residential

environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the

instructions found in the users manual, may cause interference harmful to the operation of

other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations.

If this product is found to be the source of interference, which can be determined by turning the unit

“OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line

filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact

Yamaha Corporation of America A/V Division, 6600 Orangethorpe Avenue, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of

America or its subsidiaries.

FCC CAUTION

Change or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

CAN ICE-3 (B)/NMB-3 (B)

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain the Owner’s Manual in a safe place for

future reference.

COMPLIANCE INFORMATION STATEMENT

Responsible Party: Yamaha Corporation of America A/V Division

Address: 6600 Orangethorpe Avenue, Buena Park, CA 90620

Telephone: 714-522-9011

Type of Equipment: Integrated Audio System

Model Name: ISX-18

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS

standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of this device.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC

radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the

radiator at least 20cm or more away from person’s body.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

iii

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for

future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight,

heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following

minimum clearances.

Top: 5 cm (2 in.), Rear: 5 cm (2 in.), Sides: 5 cm (2 in.)

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit

in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside

this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.

–

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the

user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a

wall outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any

service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC

power plug from the wall outlet.

16 Be sure to refer to the “Troubleshooting” section for common operating errors before concluding

that this unit is faulty.

17 Before moving this unit, press A to set it to standby mode and disconnect the AC power plug from

the wall outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the

power cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave

this unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug can be reached easily.

21 Be sure to use the supplied AC adaptor. Also, do not use the supplied AC adaptor for other units.

Failure to observe the above may cause a fire, burns, or malfunctions.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall

outlet, even if this unit itself is turned off by A. This state is called the standby mode. In this

state, this unit is designed to consume a very small quantity of power.

Radio waves may affect electro-medical devices. Do not use this unit near medical devices or

inside medical facilities.

Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or

defibrillator implant.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it

should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions

described below.

The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is

hazardous if engaged in a live socket outlet.

■ Special Instructions for U.K. Model

The user shall not reverse engineer, decompile, alter, translate or disassemble the software used

in this unit, whether in part or in whole. For corporate users, employees of the corporation

itself as well as its business partners shall observe the contractual bans stipulated within this

clause. If the stipulations of this clause and this contract cannot be observed, the user shall

immediately discontinue using the software.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with

the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to

the terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of the three pin plug.

Information for Users on Collection and Disposal of Old Equipment:

This symbol on the products, packaging, and/or accompanying documents means that

used electrical and electronic products should not be mixed with general household

waste.

For proper treatment, recovery and recycling of old products, please take them to

applicable collection points, in accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and

prevent any potential negative effects on human health and the environment which

could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact

your local municipality, your waste disposal service or the point of sale where you

purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer

or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Yamaha Music Europe GmbH declares that the radio equipment type [ISX-18D] is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is

available at the following internet address:

https://europe.yamaha.com/en/support/compliance/doc.html

The name plate is located on the bottom of the unit.

Table of Contents

IMPORTANT SAFETY

INSTRUCTIONS

......i

CAUTION: READ THIS BEFORE

OPERATING YOUR UNIT.

......iii

Introduction......3

Supplied accessories......3

About this manual......3

Home audio network with

MusicCast

......4

Easy control with the app......4

What you can do with this unit......5

Part name......6

Top panel......6

Rear panel......6

Front panel display......7

Preparations......8

Installation......8

Connecting the FM antenna (ISX-18) or DAB/FM antenna

(ISX-18D)......9

Connecting AC adaptor......10

Turning on the power......11

Connecting to the network......12

Setting of the devices and playback......13

Connecting to the network by sharing the iOS device

setting......14

Playing network contents......15

Listening to the songs in the computer......15

Listening to Internet radio......17

Supports streaming services......17

Presetting network contents......18

Listening to the Music with

AirPlay

......19

Playing back songs with iPhone......19

Playing back songs with iTunes......19

Listening to music via Bluetooth

connection

......20

Pairing a Bluetooth device with the unit......20

Connecting a paired Bluetooth device and playing back

music......21

Listening to music through wireless headphones......22

Listening to FM radio stations......23

Tuning in FM stations......23

Presetting FM stations......23

Listening to DAB stations

(ISX-18D)

......24

Preparing for DAB reception......24

Tuning in DAB stations......24

Presetting DAB stations......25

Using the alarm function......26

3 types of alarms......26

Source......26

Snooze......26

Setting the alarm time......27

Turning the alarm on/off......27

Stopping the alarm for a short time(snooze)......28

Turning the alarm off......28

Using the sleep timer......29

Updating the firmware......30

Updating with a “MusicCast CONTROLLER”......30

Updating with the unit......30

Other functions......31

Disabling the Wi-Fi function......31

Disabling the Bluetooth function......31

Initializing network settings......32

Setting the auto standby function......32

Troubleshooting......33

General......33

Network......34

Bluetooth......36

FM reception......37

DAB reception (ISX-18D)......38

Supported devices/media and file

formats

......39

Specifications......40

Trademarks......42

Introduction

Confirm the package contents and useful points of this manual.

Supplied accessories



AC adaptor



Stand



Non-skid pads



FM antenna

(ISX-18)



DAB/FM antenna

(ISX-18D)



Screw

When placing the unit on a flat surface, affix

the included Non-skid pads to the corners of the

unit undersides, as shown. The pads will prevent

the unit from moving around.

When hanging the unit on the wall, to prevent

the vibration from the sound from reaching the

wall, attach the Non-skid pads on the two corners

of the rear panel.



Quick Manual



Safety Brochure

Keep the screw out of reach

of children to prevent them

from accidentally

swallowing a screw.

About this manual

• iOS and Android mobile devices are collectively referred

as “mobile devices.” The specific type of mobile device

is noted in explanations as needed.

• “iPhone” described in this manual may also refer to

“iPod” or “iPad.”

• Illustrations may differ from actual item depicted.

• Symbols:

Indicates precautions for use of the unit and its

feature limitations.

Indicates supplementary explanations for better

use.



Indicates the corresponding reference page(s).

AC adaptor: DC 12 V, 2.5 A

Country Number

U.S.A. AY30AA-BF1202502-US/-01

Taiwan AY30AA-BF1202502-TW/-01

Europe, Asia AY30AA-BF1202502-EU/-01

U.K. AY30AA-BF1202502-UK/-01

Australia AY30AA-BF1202502-AU/-01

Home audio network with MusicCast

Easy control with the app

MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a variety of devices. You can enjoy music

from your smartphone, PC, NAS drive and music streaming service anywhere in your house with one easy-to-use app. For more details and a lineup of MusicCast

compatible products, visit our website.

http://www.yamaha.com/musiccast/

System requirements

- For details, search App Store or Google Play™ for “MusicCast CONTROLLER.”

- The application supports iPhone and Android mobile devices.

To use the unit, you need the dedicated app “MusicCast CONTROLLER” for the operation.

Install the MusicCast CONTROLLER app to the mobile device.

Home audio network with MusicCast

What you can do with this unit

* DAB is compatible only with ISX-18D.

These unit operations are performed with the “MusicCast CONTROLLER” app. y indicates operations that can also be performed from the unit.

Basic operations

Turn on/standby y

Adjust volume y

Mute

Switch source y

Adjust sound tone

Equalizer (Low/Mid/High)

Using the clock/alarm

Clock

Set time (manual/automatic)

Switch display (12-hour/24-hour)

Alarm function

Turn on/off alarm function

Stop alarm

Set alarm time

Set alarm sound

Adjust alarm volume

Use snooze

Enjoying network content

Listen to music from a mobile device

Listen to Internet radio

Play back music files from a PC or NAS

Play back music with AirPlay

Listen to network streaming services

Recall registered contents y

MusicCast network

Distribute audio via MusicCast network

Link distribution

Adjust audio output

Bluetooth distribution

Bluetooth

Enjoy music with a Bluetooth connection

Connect to Bluetooth-compatible devices

Disconnect from Bluetooth-compatible devices y

Listening to FM/DAB* radio

Select radio stations (manual/automatic)

Manually register/delete radio stations

Automatically register FM radio stations

Recall registered radio stations y

Compatible with Initial Scan/Tune Aid for DAB

Specifying unit settings

Set a sleep timer

Adjust the front panel display brightness (DIMMER)

Music enhancer

This function enhances the sound of compressed digital

sound by regenerating musical elements that are lost

through compression via Bluetooth connection.

Part name

Top panel

Rear panel

(ISX-18)

(ISX-18D)

1 Wi-Fi indicator ( P.12)

2 Bluetooth indicator ( P.20)

3 A (Power)/CONNECT ( P.11)

Turns the unit on or switches it to standby.

4 SOURCE

Switches the playback source.

5 VOLUME–/+

Controls the volume.

6 PRESET ( P.18, 23 )

Recalls registered network contents or radio stations.

7 ALARM ( P.27)

Turns on/off the alarm function and stops the alarm.

1 Screw hole for installing the stand ( P.8)

2 Hole for wall-hanging installation ( P.8)

3 NETWORK jack

4 DC input connector ( P.10)

5 Service terminal

Terminal for service maintenance: Do not connect cables,

and do not remove the attached cap.

6 ANT FM jack (ISX-18) ( P.9)

7 ANT FM/DAB jack (ISX-18D) ( P.9)

Part name

Front panel display

1 Source indicator

Shows selected source.

NET: Network sources

: Bluetooth

FM: FM radio

DAB: DAB radio (ISX-18D)

2 Play indicator

Displays the playback mode.

3 Illumination sensor

Detects ambient lighting. Do not cover this sensor.

4 Multi-function indicator

Displays various information, including the clock time or

volume settings.

5 Sleep timer indicator

Lights up when the sleep timer is set ( P.29).

6 Alarm indicator

Lights up if the alarm is turned on ( P.27).

Setting the clock of front panel display

You can set the clock time in the “MusicCast

CONTROLLER” app. Tap (Settings) in the room

select display.

The clock can be automatically synchronized with

the clock on your smartphone by using the app

(auto setting).

The clock can be set by using the app (manual

setting).

- The clock can be switched between a 12-hour

and 24-hour display.

- The clock setting will be lost if you disconnect

the power cable from the wall outlet for about a

week. Set the clock again.

Adjusting brightness of front panel display

You can set the brightness of front panel display in

the “MusicCast CONTROLLER” app. Tap

(Settings) in the room select display.

- Auto (default setting): adjusts the brightness

automatically to match the surroundings.

- 0: darker

- 1: between 0 and 2

- 2: brighter

When Auto is set, the brightness of the front panel

display is adjusted automatically with the

illumination sensor. Ensure that the sensor is not

covered.

Preparations

Installation

Have a Phillips (+) screwdriver ready to use during assembly.

Attach the stand using the specified screw.

1 Insert a screw into the wall.

•

Prepare a commercially available tapping screw (screw

diameter 3.5mm to 4mm (1/8 in).

2 Hook the hole for wall-hanging

installation onto the screw head.

When installing on a shelf

Note

• Attach the stand using the specified screw supplied in

the package.

• Tighten the screw firmly so that the unit never gets

shaky.

• The unit cannot be used by itself. Be sure to complete

the installation.

• After installation, place the unit on a stable surface, and

observe the following precautions.

- Do not place on a metal sheet such as sheet iron.

- Do not cover the unit with cloth.

When hanging the unit on the wall

Note

• Secure installation is the owner's responsibility. Yamaha

shall not be liable for any accident caused by improper

installation. If you are uncertain about the wall strength,

please consult an installation specialist.

Wall/Reinforcing

material

20 mm (3/4 in.)

or more

7 mm (1/4 in.)

The unit

1.1 kg (2.4 lbs.)

• Spread a soft cloth or other protective mat over

the table before installation.

• Keep the screw out of reach of children to prevent

them from accidentally swallowing a screw.

• Make sure that the screw is securely caught by the

narrow part of the hole.

• Do not mount the unit on thin plywood or on a

wall made of soft material. Otherwise, the screw

may pull out of the surface and the unit may fall,

possibly damaging it or causing personal injury.

• Do not mount the unit on a wall using nails,

adhesives, or unstable hardware. Long term use

and vibration may cause the unit to fall.

• To prevent the unit from falling down, it is

recommended to attach a commercially available

safety wire. Use the supplied screw to attach the

safety wire to the screw hole for installing the

stand.

Preparations

Connecting the FM

antenna (ISX-18) or

DAB/FM antenna (ISX-

18D)

1 Connect the supplied antenna to the

unit.

2 Install antenna with pins where the

unit can obtain good reception.

• The antenna should be stretched out.

• If radio reception is poor, change the height, direction,

or placement of the antenna.

• A commercially available outdoor antenna may

improve reception.

(For ISX-18)

Remove the protection cap of the jack.

• Keep the protection cap out of reach of

children so as to ensure that it is not mistakenly

swallowed.

(ISX-18)

(ISX-18D)

Preparations

Connecting AC adaptor

Do not connect the power cable of the unit

until you have finished connecting all

cables.

• Place the cable so that a hand or foot is not caught by it.

to AC inlet

Preparations

Turning on the power

Plug the power cable into the wall outlet

and press

A (power)/CONNECT.

• The unit turns on.

• Press

A (power)/CONNECT again to turn off (standby

mode).

The unit can be set to display the clock or the network connection status when it is in standby (network

standby).

If network standby is turned off, the unit can reduce power consumption without displaying the clock

(eco standby). For details, see the table on the right.

Network standby can be turned on /off in the following procedure.

1 While pressing ALARM of the unit, plug the power cable into an outlet.

2 Press and hold ALARM.

• The front panel display shows “ON” or “OFF.”

A (power)/CONNECT

Network standby

Status in network standby/eco standby

• When you turn on the unit for the first time after

purchase, the Wi-Fi indicator blinks and the unit

automatically starts to search iOS device ( P.14).

• When the unit is turned on, a Source indicator

( P.7) lights up.

Network

standby

Eco

standby

Enable/disable the alarm Yes No

Control from the app Yes No

Clock display Yes No

Network connection Yes No

Bluetooth connection Yes No

• When the auto standby is on (default setting), the

unit will automatically go into the standby state

under the following conditions.

- When the unit produces no sound of audio

input and is not operated for about 20 minutes

at selecting Bluetooth or NET as the source.

- When the unit has passed for 8 hours in the FM/

DAB reception.

Preparations

Connecting to the

network

You can play back music files stored on your PC, mobile

devices, DLNA

-compatible NAS, or audio contents on the

Internet, by connecting this unit to the network. You can

also operate the unit with your mobile device.

* Digital Living Network Alliance

1 Start the app, and then tap “Setup.”

• If you have already connected a MusicCast

compatible device to the network, tap

(Settings) in room select display, and then add

this unit as a new device.

2 Turn on the unit.

3 Press and hold the A (power)/

CONNECT on the unit for 5 seconds.

• Follow the guidance displayed in the app to set.

4 Follow the instructions in the

MusicCast CONTROLLER app to play

music.

• When the unit is connected to a network via a

wireless connection, the Wi-Fi indicator ( P.6)

lights up.

Connecting to the network using

MusicCast CONTROLLER

• For details on Internet connection, refer to the owner’s manuals of your network devices.

• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the

access of the unit to the network devices or the Internet. In this case, change the setting of the security software or

network devices.

• If you connect the unit to the network with a network cable, connect with a commercially available STP (shielded twisted

pair) network cable (straight, CAT-5 or higher).

• For network connection, “MusicCast CONTROLLER” is required. Before making connection, connect the mobile device

where “MusicCast CONTROLLER” has been installed to the wireless router (access point) you will use.

This unit

Internet

Wireless router

(access point)

Mobile device

NAS

Network cable

Modem Network cable

Wired or wireless

Network cable

Preparations

Setting of the devices

and playback

Create the following network (MusicCast Network) using

the MusicCast CONTROLLER app.

• If you want to install a MusicCast compatible device to a location that is out of range of the wireless router, connect

another MusicCast support device to the router with a network cable to extend the range (Extend mode).

• Depending on where it is placed, the MusicCast compatible device may not be able to play back a high-resolution audio

source. In this case, connect the device directly to the router with a network cable.

Wireless router

(access point)

ISX-18/ISX-18D

ISX-18

Standard Mode

Extend Mode

ISX-18

Preparations

Connecting to the network by sharing the iOS

device setting

When you turn on the unit for the first time after purchase or initialization of network settings ( P.12), the Wi-Fi indicator

blinks and the unit automatically starts to search iOS device (such as iPhone). You can easily setup a wireless connection by

applying the network settings on iOS devices.

Before proceeding, confirm that your iOS device is connected to a wireless router (access point).

This setting does not need to be specified if the unit is connected to a network with “MusicCast CONTROLLER.”

Display the Wi-Fi setup screen on the iOS device and select the unit from “SETUP A NEW

AIRPLAY SPEAKER....”

• Follow the on-screen instructions displayed on the iOS device.

• In order to enjoy all features of the unit, connect it to a network with “MusicCast CONTROLLER” ( P.12).

• You need iOS device with iOS 7.1 or later.

• The network settings on iOS devices cannot be

applied to the unit to establish a wireless

connection if your wireless router (access point)

uses WEP encryption.

Playing network contents

This unit allows you to play back music files such as MP3, WMA, or FLAC (lossless audio data compression format) files stored in the computer (server) connected to

the network or NAS. You can also listen to world-wide radio stations via the Internet.

Listening to the songs

in the computer

To play back music files in your computer with this unit,

you need to make the media sharing setting between the

unit and computer (Windows Media Player 11 or later).

In here, setting with Windows Media Player 12 in

Windows 7 is taken as an example.

1 Start Windows Media Player 12 on

your PC.

2 Select “Stream,” then “Turn on media

streaming.“