Andersson LED5062UHD PVR Användarmanual

LED5062UHD PVR | 50 inch LED-TV

User manual

English | Svenska | Norsk

Copyright

This manual is the copyright of CI no 556520-4137. No part of this manual may be revised, copied or transmitted

in any way without written permission from CI no 556520-4137.

Statement

This manual does not provide any warranty or related declarations. All information in this manual including the

product speciﬁcation, pictures and literatures is just for reference, CI no 556520-4137 reserves the rights to update

contents of this manual without further notice.

Copyright

Org.nr 556520-4137 äger upphovsrätten till den här handboken. Inga delar av handboken får ändras, kopieras eller

överföras utan skriftligt tillstånd från org. nr 556520-4137.

Meddelande

Den här handboken innehåller inga garantier eller andra typer av utfästelser. All information i handboken, inklusive

tekniska data, bilder och texter, är endast exempel och används i referenssyfte. Org.nr 556520-4137 förbehåller sig

rätten att upp-datera innehållet i handboken utan föregående meddelande.

Opphavsrett

Org.nr 556520-4137 har opphavsretten til denne håndboken. Ingen deler av denne håndboken skal revideres, kopieres

eller overføres på noen måte uten skriftlig samtykke fra org.nr 556520-4137.

Erklæring

Denne håndboken gir ingen garanti eller tilhørende forsikringer. All informasjon i denne håndboken, inklusiv produkt-

spesiﬁkasjon, bilder og tekst, er bare ment som referanse. Org.nr 556520-4137 forbeholder seg retten til å oppdatere

innholdet i denne håndboken uten forvarsel.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. This

product and the accessories packed together are the applicable product

to the WEEE directive except batteries. Please dispose of any materials in

accordance with your local recycling regulations. When discarding the unit,

comply with your local rules or regulations. Batteries should never be thrown

away or incinerated but disposed of in accordance with your local regulations

concerning chemical wastes.

ANGÅENDE ÅTERVINNING

Kartonger och packmaterial till denna produkt är återvinningsbart och

kan återanvändas. Denna produkt och alla tillbehör förutom batterier följer

WEEE-direktivet om återvinning. Vänligen släng allt eventuellt material från

produkten enligt de lokala regler som råder där du bor. När du kasserar din

produkt, följ då dina lokala lagar om återvinning. Batterier får aldrig slängas

eller eldas utan ska istället tas hand om enligt dina lokala regler om kemiskt

avfall.

OM RESIRKULERING

Kartonger og pakkematerialet till dette produktet er gjenvinningsbart og

kan resirkuleres. Dette produktet og alt tillbehør, utenom batteriene, følger

WEEE-direktivet om resirkulering. Vær vennlig og kast alt eventuelt materiale

fra produktet i henhold til de lokale regler der du bor. Når du kasserer ditt

produkt, følg dine lokale lover om gjenvinning. Batterier skal aldri kastes eller

brennes, følg dine lokale regler om kjemisk avfall.

Table of Content / Innehållsförteckning / Register

English

Important Safety Instructions 4

Preparation 5-10

Connecting External Devices 11

General Operation 11-12

Customizing TV Settings 14-24

Using the features 25-26

PVR (Personal Video Recorder) 27-30

Entertainment 31-34

Speciﬁcations 35

Svenska

Viktiga säkerhetsinstruktioner 36

Förberedelse 37-42

Anslut externa enheter 43

Allmän användning 44

Anpassa TV-inställningar 46-56

Funktioner 57-58

PVR (Personlig videoinspelning) 59-62

Underhållning 63-66

Speciﬁkationer 67

Norska

Viktige sikkerhetsinstruksjoner 68

Forberedelse 69-74

Tilkobling av eksterne enheter 75

Generell bruk 76-77

Tilpasning av tv-innstillinger 78-88

Funksjoner 89-90

PVR (Personal Video Recorder) 91-94

Underholding 95-98

Spesiﬁkasjoner 99

English Svenska Norsk

4

Important Safety Instructions

WARNING: To prevent the spread

of ﬁre, keep candles or other open

ﬂames away from this product at all

times.

´ This equipment is a class II or double

insulated electrical appliance. It has been

designed in such a way that it does not

require a safety connection to electrical

eath.

´

Unwind and straighten the power cord

before use.

´

Place the product on a ﬁrm and level

surface.

´

Turn off the appliance during thunder-

storms.

´

To completely disconnect this product from

the mains, disconnect the plug from the

wall socket outlet. The mains plug is used

to completely interrupt the power supply to

the unit and must be within easy access by

the user.

´

Clean only with a dry cloth, unplug the outlet

before cleaning. Do not use aggressive

cleaners as these will damage the surface

´

Only use attachments/accessories

speciﬁed by the manufacturers.

´ Do not locate the appliance in the vicinity of

a heat source or in direct sunlight. Do not

place a naked ﬂame source on or near this

product.

´

Repairs must only be performed by the

manufacturer or its service agent or similarly

qualiﬁed person.

´

Do not immerse the main unit or any

accessories in water or any other liquid.

´

Do not expose this product to dripping or

splashing or stand any vessel containing

liquid on or near this product.

´

Warning: To reduce the risk of ﬁre or electric

shock, do not expose this apparatus to rain

or moisture.

´

The apparatus shall not be exposed to

dripping or splashing and that objects ﬁlled

with liquids, such as vases, shall not be

placed on apparatus.

´

Remove exhausted batteries from the

product immediately.

´

Remove the batteries from the product

during periods of non-use.

´

Replace only with batteries of the same

type.

´ Do not mix old and new batteries.

´

Do not mix alkaline, standard (carbonzinc)

or rechargeable (nickle-cadmium) batteries.

´

Batteries should be inserted with the polarity

indicated on the battery compartment.

´

Non-rechargeable batteries should not be

recharged.

´ Dispose of batteries safely. Do not attempt

to burn them. Use collection points where

available.

´

Make sure the battery compartment is

secure.

´

The battery (battery or batteries or battery

pack) shall not be exposed to excessive

heat.

English Svenska Norsk

5

What’s Included

Preparation

TV Set

Five ScrewsBase Stand

User Manual Quick Start Guide

Remote Control with Batteries

TIMESHIFT

FAV

/TTX

/HOL D

/REVEA L

SUBPAG E

SOURCE INFO

MENU

EXIT

P.MODE

S.MODE

CH

TV/RADI O

REC

OK

LIST

/INDE X

User Manual

Quick

Start Guide

English Svenska Norsk

6

Front View

1. POWER Indicator

Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby

mode.

2. IR (Infrared Receiver)

Receive IR signals from the remote control.

Preparation

English Svenska Norsk

7

Rear View

1. POWER

Switch the TV between On/Standby

mode.

2. SOURCE

Press to select among different input

signal sources

3. MENU

Display the OSD (on screen display)

menu.

4. CH

Press to select a channel.

5. VOL +/-

Press to adjust the volume.

6. Headphone Socket

Plug in headphones.

7. PC AUDIO Input

Connect to a computer audio output.

8. VGA Input

Connect to a computer or other devic-

es with a VGA interface.

9. SCART socket

You can connect your TV to devices

with a SCART output such as a set

top box.

10. DTV/TV Input

Connect to the antenna (75Ω VHF/

UHF) socket with the RF coaxial cable

11. COAXIAL Digital Audio Output

Connect to the audio socket on the

digital audio system.

12. Common interface slot

Your TV is equipped with a common

interface slot that allows you to insert

a subscription card (to be purchased

separately) to view pay to view ser-

vices.

13. MINI YPBPR

Connect to AV devices with Compo-

nent /AV output sockets.

14. MINI AV

Connect to the composite VIDEO and

AUDIO (L/R) output sockets on exter-

nal video devices.

15. USB port

Connect to USB-devices

16. HDMI Inputs

Connect to a High-Deﬁnition (HD)

signal output device.

Preparation

13 14 15

16

11

12

English Svenska Norsk

8

Preparation

1. Lay the TV facedown on a ﬂat, cushioned

surface to avoid damage or scratching.

2. Fix the stand assembly to the TV using the

5 provided screws.

1. Lay the TV facedown on a ﬂat, cushioned

surface to avoid damaging or scratching.

2.

Untighten the 6 screws holding the stand

assembly and remove it.

3.

Attach the wall-mount bracket to the TV

using the mounting holes on the back of

the TV. Mount this TV according to the

instructions included in the wall-mount

bracket.

Removing the Stand for Wall-Mounting

Installing the Stand

English Svenska Norsk

9

Preparation

Understanding the remote control buttons

1.

: Switch the TV between on and standby

mode.

2.

: Mute and restore your TV sound.

3. TIMESHIFT: Turn on and off the Time shift

function (DTV mode):

: Press to start playback or pause (USB

Mode).

: Press to stop playback (USB mode).

FAV: Display the Favourite Channel list (ATV/

DTV mode).

REC /: One button recording function

button. Press it to record the current DTV

video.

EPG: Displays the EPG (Electronic Program

Guide) (DTV mode).

4.

I

: Press to skip to the beginning of the

previous chapter or track (USB mode).

TTX: Turn on and off the teletext function

(A

TV/DTV mode).

 :Press to fast rewind (USB mode).

INDEX: Press to select the page number of the

INDEX from teletext (ATV/DTV mode).

SUBTITLE: Display the subtitle which is

broadcast with the program (ATV/DTV

mode). Selects subtitles on the media (USB

mode).

ASPECT Select from the following mode

settings: 16:9/ Zoom1 / Zoom2 / Just

Scan(Only HDMI Mode) / Auto / 4:3

5.

I

: Press to skip to the beginning of the

next chapter or track (USB mode).

HOLD: Freeze a multi-page passage on the

screen in Teletext (ATV/DTV mode).

 :Press to advance playback rapidly (USB

mode).

REVEAL Reveal hidden information such as

the answer to a quiz in Teletext (ATV/DTV

mode).

SUBPAGE: Display the subpage on the teletext

screen (ATV/DTV mode).

SLEEP: Set the TV sleep timer

6. RED/GREEN/YELLOW/BLUE: Press the button to

select corresponding function on t

he screen.

TIMESHIFT

FAV

/TTX

/HOLD

/REVEA L

SUBPAGE

SOURCE INFO

MENU

EXIT

P.MODE

S.MODE

CH

TV/RADIO

REC

OK

LIS T

/INDEX

1 2

8

11

14

17

13

3

4

5

6

7

10

9

12

15

16

English Svenska Norsk

10

Preparation

7. SOURCE: Select among the different

input signal. SOURCES: DTV / ATV /

AV /SCART / YPbPR / HDMI 1/HDMI2 /

HDMI3 / PC/ USB.

8. INFO: Display the present screen

information such as the current channel

and the input source.

9.  : Allows you to navigate the

OSD menu and adjust the system

settings to your preference.

OK: Conﬁrm changes in the TV menu.

Display a list of channels saved in the TV

tuner memory.

10. MENU: Display the TV settings menu.

11. EXIT: Exit the OSD (On Screen Display)

menu.

12. VOL + / -: Adjust the volume.

13. P.MODE: Select picture mode.

S.MODE: Select sound mode.

14. CH + / - : Select a channel.

15. 0-9 Number Button: Select a programme

or Select numbered items in a menu.

16. TV.RADIO Select TV program or Radio

program (DTV mode).

17.

: Return to previous viewing channel.

Note:

Remove battery during storage or when you

are not using the device for a long time.

To control the device using the remote

control, point the remote control at the device

and then press the button with the required

function.

The maximum range of the remote control is

about 5 meters with a deviation of up to +/-

30° from the perpendicular direction to the

reception sensor of the remote control on the

front side of the device. The falling capacity

of the batteries gradually reduces the remote

control range.

There must be no solid obstacles in the area

between the remote control and the device

when the remote control is being used.

During standard use the lifetime of batteries in

the remote control is about 1 year.

When the effective range of the remote

control is substantially reduced, or when

there are problems with its use, change both

the batteries in the remote control.

If you will not be using the remote control for a

longer period of time, take out both batteries

from it - in this in this way you will prevent

potential damage caused by their leakage.

English Svenska Norsk

11

Connecting External Devices

Headphone

Computer

AC outlet

HDMI 4.1 Cable

CI Module

Mini

YPBPR

Mini

AV

USB

HDMI 1 HDMI 2 HDMI 3

PC AUDIO VGA SCART DTV/TV COAXIAL

Audio/Video device

with Scart socket

DVD or Blu-ray Player,

Sattelite Receiver,

Cable Box or Game

Console

Antenna or

Cable Box / Wall Jack

Audio System

Coaxial

Cable

RF Cable

Scart

Cable

VGA

Cable

PC

Audio

Cable

AUDIO/VIDEO

OUT

´ Note: The power cord is the only cable which is included with the TV set.

Component

Cable

Mini AV

Cable

AV Cable

Mini

YPBPR

Cable

English Svenska Norsk

12

General Operation

Initial Setup

´ Connect one end of the RF coaxial cable (not included) to the aerial socket on the wall and the other

end of the cable to the RF (75) socket at the rear right bottom view of your TV.

´ Connect the mains cable to the mains socket after you have completed all the connections.

´ Switch on the POWER ON/OFF switch which is located at the front right side under the frame. At

this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel

of the TV.

´ In standby mode, press the

button on the front right side panel of the TV or the button on the

remote control to turn the TV on. The red LED indicator will turn blue.

´ The ﬁrst time you turn the TV on, it will go straight

into the First Time Installation menu. Press the /

buttons to select your desired mode setting.

´ Press the  /  /  / buttons to navigate the menu

and change the settings.

OSD

Language

Selects your desired language to be displayed on the menu. The default on-

screen menu language is set to English.

DVB Select Type Select DVB Type

Country Selects the country where you will operate the TV. The default country is set to

Sweden.

Tune Type Selects the tune type: ATV+DTV/DTV/ATV.

OK Press the OK button to start auto tuning.

Channel Tuning will commence. This

operation may take up to several minutes.

The display will show the progress of the

tuning and the number of channels found.

English Svenska Norsk

13

General Operation

Selecting Input Source

1. Press the SOURCE button on the front right side panel of the TV or the SOURCE button on the

remote control to display the Input Source list.

2. Press the / buttons to select the input source that you want: DTV / ATV / AV / SCART / YPBPR /

HDMI1 / HDMI2 / HDMI3 / PC/ USB.

3. Press the OK button to conﬁrm your selection.

Channel Selection

Press the CH + / - buttons on the remote control repeatedly or the 0-9 buttons to select the

channel.

´ Alternative:

Press the CH.LIST button to enter the Channel List. Then use the / buttons to highlight

and select the channel. Press the OK button to view the selected channel.

Display program information

Press INFO on the remote control to display information.

Volume Adjustment

Press the VOL + / - buttons on the side panel of the TV or on the remote control

to adjust the volume. If you wish to switch the sound off, press the button. Press the button

again or the VOL + / - buttons to resume audio listening.

English Svenska Norsk

14

Channel Settings

Antenna

Press the MENU button to display the main menu. Press

the / buttons to select CHANNEL and then press the

OK button. Press the  button and then press the /

buttons to select Air or Cable,then press OK.

Auto Scan

Press the / buttons to select Auto Scan and then

press the OK button.

In the Auto Scan menu. Press the  /  /  / buttons to select

the country where you will operate the TV and the Tune Type:

ATV+DTV/DTV/ATV. Press the OK button to start auto tuning.

(Note: If you select DVB-C in the Installation Guide Menu

you can select the option: scan type/Frequency/Network

Symbolks.)

Channel tuning will commence. This operation may take up to

several minutes. The display will show the progress of the tuning and

the number of channels

found.

If you want to skip the ATV tuning, press the MENU button to

interrupt the tuning half way. A pop-up screen will be displayed,

press the  button to select YES to conﬁrm. You will then go straight

to DTV tuning. You may repeat the above step if you also want to

skip the DTV tuning. An installation reminder will appear the next

time you turn on the TV.

ATV Manual Tuning (ATV Mode)

Press the MENU button to display the main menu. Press

the  /  buttons to select CHANNEL and then press the

OK button. Press the  / buttons to select ATV Manual

Tuning and then press the OK button. The ATV Manual

Tuning screen will pop up. Use the  / buttons to select

the following options and the  /  buttons to adjust the

setting.

Customizing TV Settings

English Svenska Norsk

15

Storage To Selects a channel number.

System Selects the sound system: I / DK / L / BG.

Current CH Displays the current channel number.

Search Press the buttons to start the manual tuning.

Fine-Tune Press the buttons to make manual ﬁne tuning adjustments

After ﬁnishing the manual tuning adjustment of a channel, press the RED button to save your

channel before tuning the next channel.

DTV Manual Tuning

1. Press the MENU button to display the main menu. Press the  /  buttons buttons to select

CHANNEL and then press the OK button. • Press the buttons to select DTV Manual Tuning

and then press the OK button.

2. In the DTV Manual Tuning menu. Press the  /  buttons to select the desired UHF channel

and then press the OK button to commence the search of that channel. When the signal has

been tuned, the picture and signal strength will be displayed on the screen.

Programme Edit

1. Press the MENU button to display the main menu. Press the  /  buttons to select

CHANNEL and then press the OK button.

2. Press the  / buttons to select Programme Edit and then press the OK button.

3. A Programme Edit screen will pop up. Press the  / buttons to select the programme you

want to edit.

Customizing TV Settings

English Svenska Norsk

16

´ Delete

Press the RED button to delete the selected channel.

´ Skip

Press the BLUE button to select the channels that you want to skip when you are selecting

channels. Press the BLUE button again to undo it.

´ Rename (For ATV mode only)

Press the GREEN button to rename the selected channel. Press the  / buttons to select

the characters to represent the station name. Press the  /  buttons to move to the next

character and then press the OK button again to conﬁrm the new name.

´ FAV (Favorite)

Press the FAV button to set the selected channel as one of the favorite programmes. Press the

FAV button again to undo it.

ATV Mode

DTV Mode

Customizing TV Settings

English Svenska Norsk

17

Customizing TV Settings

Signal Information (DTV Mode)

1. Press the MENU button to display the main menu. Press the  /  buttons to select

CHANNEL and then press the OK button.

2. Press the  / buttons to select Signal Information and then press the OK button to view the

signal information.

CI(Common Interface) Information (DTV Mode )

The common interface allows the use of a Common Access Module to enable you to view

scrambled (pay to view) service. These services are provided by TopUp TV (UK only) and others.

The Common Access Module and viewing card can be obtained from the service provider.

Note: Do not repeatedly insert or remove the Common Access Module as this may damage the

interface and cause a malfunction.

This feature is not available in all countries.

To insert the Common Access Module

1. Before you insert the Common Access Module, ensure that the TV is switched off and the

viewing card is inserted in accordance with the Service Provider’s Instructions.

2. Insert the Common Access Module into the slot. Flip the Common Access Module to another

side and try again if you feel resistance.

3. Switch the TV on.

To remove the Common Access Module

1. Before you remove the Common Access Module, ensure that the TV is switched off.

2. Pull the Common Access Module from the slot.

3. Switch the TV on.

To view the module information

1. Press the MENU button to display the main menu. Press the  /  buttons to select

CHANNEL and then press the OK button.

2. Press the  / buttons to select CI Information and then press the OK button.

3. A CI Information main menu will pop up. Press the  / buttons to select the options and then

press the OK button to view.

English Svenska Norsk

18

Customizing TV Settings

Delete Press the RED button to delete the selected programme.

Info Press the INFO button to display detailed information of the selected

programme. (If available)

Select Press the OK or PLAY button to play the selected programme.

Index Press the INDEX button to select the category type:

Programme / Channel / Time.

Recorded Mode

1. Press the MENU button to display the main menu.

2. Press the  buttons to select CHANNEL and then press the OK button. Press  the

buttons to select Recorded Mode and then press the OK button. A Programme Schedule

menu will pop up.

3. Press the   buttons to adjust the settings and then press the OK button to save. (See

“Timer Programming” for details)

Schedule List

1. Press the MENU button to display the main menu. Press the  buttons to select CHANNEL

and then press the OK button. Press the  buttons to select Schedule List and then press

the OK button to view the preset reminders or scheduled recordings in the schedule list.

PVR File System

1. Press the MENU button to display the main menu. Press the  buttons to select CHANNEL

and then press the OK button.

2. Press the  buttons to select PVR File System and then press the OK button.

3. Press the  buttons to select the following PVR File System options and press the OK

button.

English Svenska Norsk

19

Customizing TV Settings

Select Disk Select the disk where you want to store your recorded content.

Check PVR File System Press the OK button, the system will now check your USB device’s

suitability for PVR. The system will show “Checking”. Upon the completion

the system will show either “Success” or “Fail”.

USB Disk If no USB storage device is connected, it will show “No USB Disk”. If the

Check PVR File System has a “Success” it will show “Pass”.

Format

Press the OK button, a File System Size menu will pop-up. Press the 

buttons to select your preferred ﬁle type between FAT32 and HiSpeed FS.

If you select HiSpeed FS, press the  button and then press the 

buttons to select your preferred ﬁle size. Press the OK button to conﬁrm

and then press the  button tostart formatting.

Time Shift Size After formatting the Time Shift Size menu will appear if you have selected

HiSpeed FS in PVR File System Type. Press the buttons to select your

preferred ﬁle size. Press the OK button to conﬁrm. This option cannot be

chosen if you have selected FAT32 in PVR File System Type.

Speed This shows you the transfer rate of your USB storage device.

Free Record Limit Press the buttons to set the recording time limit from 1-4 hours.

English Svenska Norsk

20

Customizing TV Settings

Picture Settings

1. Press the MENU button to display the main menu.

2. Press the  buttons to select PICTURE and then press the OK button.

3. Press  the buttons to select the option you want to adjust in PICTURE menu.

4. Press the   buttons to adjust each option’s setting.

5. Press the EXIT button to exit the menu.

Picture Mode Cycles among picture mode: Standard / Mild / User / Dynamic.

Alternative: you may press the P.MODE button to select the picture mode

directly.

Contrast Adjusts the difference between light and dark levels in the picture. (For User

mode)

Brightness Increases or decreases the amount of white in the

picture. (For User mode)

Color Controls the color intensity. (For User mode)

Sharpness Adjusts the level of crispness in the edges between light and dark areas of the

picture. (For User mode)

Tint

(For NTSC format)

Adjust the balance between red and green levels. (Tint is only available for

NTSC signal input via the SCART or AV IN.)

Color Temperature Cycles among color temperatures: Medium / Warm / Cool.Adjusts the color

components independently to achieve a warm or cool. (For User mode)

• Warm: increase red tint • Medium • Cool: increase blue tint

Aspect Ratio Allows you to watch the screen in various picture formats: 16:9/ Zoom1 /

Zoom2 / Just Scan(Only HDMI Mode) / Auto / 4:3.

Noise Reduction Reduces the noise level of the connected device: Middle/ High/ Off/ Low.

PC Setup Adjusts the PC desktop content.

Sidan laddas ...

Andersson LED5062UHD PVR Användarmanual

Andersson LED5062UHD PVR Användarmanual

på andra språk

Relaterade papper

Andra dokument