POINT POHU60 LUFTFUKTER Bruksanvisning

Kategori
Luftfuktare
Typ
Bruksanvisning
Ultrasonic Humidifier
POHU60
User Manual
2
Kiitos, kun valitsit uuden POINT-ultraääni-ilmankostuttimen.
Ilmankostutin auttaa palauttamaan asianmukaisen kosteustason ja poistamaan kuivaan ilmaan
liittyvän epämukavuuden. Tuuletusjärjestelmä hajottaa veden viileän tai lämpimän höyryn
muotoon halutun kosteustason tarjoamiseksi. Tämän höyryn ilmenemismuoto on
hajotussuuttimesta purkautuva sumu.
On suositeltavaa käyttää aikaa tämän käyttöoppaan lukemiseen, jotta ymmärrät täysin, mitä
toiminnallisia ominaisuuksia tuote tarjoaa.
Takk for at du kjøpte ditt nye POINT ultrasoniske luftfukter.
Luftfukteren hjelper deg med å opprettholde et passende fuktighetsnivå og eliminere ubehaget
forbundet med tørr luft. Ventilasjonssystemet sprer vann i form av kjølig eller varm damp for å
oppnå ønsket fuktighetsnivå. Denne dampen kjennetegnes av tåke som kommer ut gjennom
diffusjonsdysen.
Vi anbefaler at du tar deg tid til å lese gjennom hele bruksanvisningen for å forstå fullt ut alle
funksjonene som tilbys.
Tack för att du har köpt ditt nya ultraljudsluftfuktare från POINT.
Luftfuktaren hjälper dig att återställa en lämplig luftfuktighetsnivå och eliminera obehaget
med torr luft. Ventilationssystemet diffuserar vatten i form av en sval eller varm ånga för att ge
den önskade fuktighetsnivån. Ångan kännetecknas av en dimma som släpps ut genom
diffusionsmunstycket.
Vi rekommenderar att du tar dig tid att läsa igenom denna bruksanvisning för att till fullo förstå
alla driftfunktioner som den erbjuder.
Tak for købet af dit nye Ultrasoniske luftfugter fra POINT.
Luftfugteren hjælper med at gendanne en passende luftfugtighed, og fjerne ubehag forbundet
med tør luft. Ventilationssystemet diffunderer vand i form af kold eller varm damp, så den
ønskede luftfugtighed opnås. Denne damp kan ses, da den udledes gennem dysen.
Vi anbefaler at du læser denne brugsanvisning, så du får en fuld forståelse af hvordan alle
betjeningsfunktionerne virker.
Thank you for purchasing your new Ultrasonic Humidifier.
The humidifier helps you to restore an appropriate level of humidity and eliminate the
discomfort associated with dry air. The ventilation system diffuses water in the form of a cool or
warm vapour in order to provide the desired level of humidity. This vapour is characterized by a
mist discharged through the diffusion nozzle.
We recommend you spend some time reading this instruction manual in order to fully
understand all the operational features it offers.
POINT
GB
SE
DK
FI
NO
4 - 19
20 - 35
36 - 51
52 - 68
69 - 85
3
Bruksanvisning - Svenska………… sida
Brugervejledning - Dansk………… side
Käyttöopas - Suomisivu
Instruction manual - English………… page
Bruksanvisning - Norsk………… side
SAFETY WARNING
Read all the safety instructions carefully
before use and keep this instruction manual
for future reference:
Follow all the safety precautions listed below for
safety and to reduce the risk of injury or
electrical shock.
- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and know ledge if they have
been given supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children shall
not play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
-Before using this appliance ensure that the
voltage of your electricity supply is the same as
that indicated on the rating plate of the
appliance.
-Always place the humidifier on a hard, flat and
level surface. Avoid exposure to direct sunlight
4
and always keep it away from walls and heat
sources such as stoves, radiators, etc. Warning:
The appliance may not work correctly if it is not
placed on a level surface.
- Do not insert or remove the electric plug on the
appliance with wet hands.
-If the mains power cable is damaged, it must be
replaced by the manufactures, its service agent,
or similarly qualified persons in order to avoid a
hazard.
-To reduce the risk of electric shock, do not
remove screws. The unit does not contain any
user-serviceable parts. Leave all maintenance
work to qualified personnel.
-Fill the tank with fresh, distilled or
demineralised water. Do not switch on the
appliance when there is no water in the tank.
-Do not shake the appliance as this might cause
the water to spill over into the base unit.
If you spill any liquid into the unit, it can cause
serious damage. Switch it off at the mains power
supply immediately. Withdraw the mains plug
and consult your dealer.
5
- Never touch the water or components while the
unit is in operation.
-If there is an unusual smell when it is being used
as described in these manual, switch the
appliance off, unplug it and have it examined by
your dealer.
-Do not pour hot water into the tank, i.e. at a
temperature in excess of 40 degree C.
-Unplug the appliance before cleaning it or
removing the tank .
-Do not immerse the appliance or the mains
power cable or plug in water or other liquids.
-Never scrape the transducer with a hard tool.
The humidifier must be cleaned regularly. To do
this, refer to the cleaning instructions in this
manual.
-If you spill any liquid into the unit, it can cause
serious damage. Switch it off at the mains power
supply immediately, withdraw the mains plug
and consult your dealer.
-Disconnect the unit from the mains power
supply when not in use and before cleaning.
Ensure that the mains power cable does not
6
touch any hot surface and that it does not
overhang a table edge.
-Never use this appliance in a room where
aerosol products (sprays) are used or in a room or
where oxygen it being administered .
-Do not put items of clothing or towels on top of
the appliance. If the nozzle is obstructed, this
may cause the appliance to malfunction.
-When moving the appliance, lift it by the base
unit and not by the water tank.
-Do not use the humidifier if the air in the room is
already sufficiently humid (relative humidity of
at least 50%). The ideal relative humidity level
for human comfort is in fact between 45% and
60%. Excess humidity shows up in the form of
condensation on cold surfaces or cold walls in
the room. To measure the room’s humidity
correctly, use a hygrometer available in most
specialist shops and hypermarkets.
-The humidifier is designed for indoor and
domestic use only.
7
Working Principle: Your Ultrasonic Humidifier uses the
ultrasonic high-frequency oscillator to break up water into
tiny water particles with the diameter of about 1-5um.The
ventilation system blows out this water into the dry air where
they evaporate to give the required humidity. The clearly
visible smooth and even fog can be seen coming out of the
unit.
Features:
Highly efficient humidification process with large output.
Low energy consumption, save up to 85-90 percent of
electricity compared to that of a normal stream humidifier.
Long lifetime
Automatic control of humidity level, lack-of-water security
protection.
Plasma: Touch the Plasma symbol of Plasma to spread a
number of Plasma elements. Press again to stop the Plasma
function.
Base with sponger box , to wet it with aromatic oil.
Correct Humidity Level:
What exactly is relative humidity: Relative humidity is the
amount of water vapor in the air, expressed as a percentage
of the maximum amount that the air could hold at the given
temperature. We normally mark it with RH, like 45RH.
Atomosphereic air always contains water vapor, the
percentage of which depends on the meterological
conditions. The higher the temperature is the more the air
keeps water vapor. Therefore, we use the concept of ‘relative
8
humidity”. When the cold air is heated up to the comfort
temperature in winter, the relative percentage of the water
vapor falls which means the relative humidity drops. In order
to keep a comfortable and health environment at home, we
need some artificial addition of water or water vapor to the
room air- that’s air humidification.
Ideal relative humidity levels under different situations.
The most comfortable RH for human being 45-65RH
Ideal RH for prophylactic and curative purpose: 40-55RH
Computer and telecom apparatuses: 45-60RH
Furniture and musical instruments: 40-60RH
Library art gallery and museums: 40-60RH
FUNCTIONS
1: Relative Humidity
The percentage of water mist in a given space with a given air
temperature is named as relative humidity, usually marked
as %RH, i.e. 45%RH. The air contains water mist more or less.
The proportion of water mist to the air varies according to
different air temperatures. The higher the temperature, the
more water mist inhaled in the air.
2: Water filter:
1)Cation exchange resin filter can soften the hard water.
2)Cation exchange resin filter demineralize in the water.
9
Pro
d
Rem
d
uct Over
v
ote Contr
v
iew
ol
10
3.Operation
During first time use, put the unit in room temperature for
half of an hour before running.
It is recommended to use the unit under temperatures of 20
degree C, with relative humidity of less than 80%RH .
Use clear water not over 40 degree C.
Check the water basin, to make sure it is clear.
1.Put the unit on a flat surface.
2.Pour water into the water tank, and then tighten the tank
cover.
3.Put the water tank on the main base.
4.Check if the rated voltage meets the input voltage, and
plug into the mains power socket. The display will show the
POWER symbol.
5.Touch POWER on the unit, the background LED light
will be on. The unit will begin to work in AUTO mode. The
display will be show the AUTO symbol and the current
humidity and current temperature alternately in 30 seconds.
After 15 seconds without any operation, the display will
become dim, touch any key except the power key to wake up
the display.
In Auto mode, the unit determines the optimal humidity and
starts to achieve it at maximum power. When the current
humidity is low the unit enters high speed operation. When
the humidity gets higher the unit will then enter low speed
operation.
11
Temperature of the air,
degrees Celsius Humidity, %
≤19 65
20 60
21 58
22 57
23 55
24 53
25 50
26 48
27 45
28 43
29 40
30 38
31 36
32 35
33 34
34 32
35 31
36 30
37 and higher 25
The unit checks the the temperature level and the humidity
level every 1 minute.
6.Timer setting: There are 12 timer settings:
1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch the TIMER
symbol, the LED display will show the desired setting timer.
12
Touch till “--:--” is displayed on the LED, to cancel timer
setting. The timer shows the rest operation time and
decreases by 1 minute, i.e., if the timer is set at 12 hours, the
LED display will show 11:30 after 30 minutes. To know what
time has been set, just touch any key except the power key to
wake up the display and then touch the TIMER symbol. Touch
again, to set the timer again.There is a shortcut for timer
setting. Touch the TIMER symbol to increase timer,
touch the MAX / MIN symbol to reduce timer.
7.Touch the MAX / MIN symbol, AUTO mode is cancelled
and the mist output is in first speed. You may select 3 desired
levels of mist volume. The corresponding mist output symbol
shows on the display with different running
speed. In mist output level 1, the unit is running in low speed,
at level 2 the unit is running in middle speed, and at level 3 it
is running in high speed. Touch the symbol again, to choose
AUTO mode.
8.Constant humidity: Before you touch the HUMIDITY
symbol, the LED display shows the current humidity. You may
set the humidity from 30%RH to 90%RH. Touch once, it will
increase by 5%RH. When it reaches 90%RH, touch again,
and the display will show “Co” and flash for 3 seconds to exit
humidity setting function and back to Auto mode. After you
set the expected humidity, the display will show the
symbol, the unit will keep the memory and confirm after 5
seconds. 5 seconds later, the symbol %RH will blink and the
LED display shows the current humidity. Touch again, it
shows the expected humidity setting. If the expected
13
humidity is less than the current humidity, the unit will be in
sleep state. If the expected humidity is 3% higher than the
current humidity, the humidify function will work. Mist
output speed cannot be set during the constant humidity
mode. There is a shortcut for humidity setting. Touch the
HUMIDITY symbol to increase humidity, touching the
MAX/MIN symbol to reduce humidity.
9.Touch the PLASMA symbol, the Plasma generator
activates. On the LED display, it will show the symbol.
Touch again to stop the function.
10.Touch the LIGHT symbol, the blue decoration light
in the bottom will illuminate and the water tank indication
light is dimmed. Touch again it will become dimmer. Touch for
a 3rd time, the light will be turned off.
11.Long press the symbol for 2 seconds, to enter to night
mode. Blue decoration light in the bottom and the water tank
indication light are off, LED display turns off, leaving only the
symbol on the display. After 5 seconds without any
operation, the symbol will become dim, press any key except
the power key to wake up the display. Then long press the
symbol again to stop the function.
12.Auto Shut-Off: Once the water in the basin is too little to
keep the unit working, the unit will automatically stop
working. The LED shows the lack of water symbol . Refill
the water, and the unit will restart. If no water is poured in 15
minutes, the unit will automatically power off.
14
13.On the remote control, the related symbol controls the
corresponding function.
14.No matter in any working mode, if there is no any
operation within 15 seconds, the display will turn dim.
Using the aroma function:
A, Pull out the aroma box from the base.
B, Use a water-soluble aroma oil and drop on to the sponge.
C, Put the aroma box back into the unit, the aroma function
will remain on when the humidifier is running.
D, To stop the aroma function or when storing the unit, clean
the sponge in the aroma box.
Operation steps:
Take the water tank out of the unit, open the water tank
cover and fill the tank with clear water.
Close the cover and put the tank onto the base unit carefully.
Put the nozzle into the socket on top of the water tank.
Connect the power supply, switch on the unit (NEVER RUN
THE UNIT WHEN THERE IS NO WATER IN WATER BASIN), the
main connection lamp will turn on. The unit will begin
working.
15
Trouble Shooting Guide
If any trouble is found during normal operation, refer to the
following points:
Problem Possible reasons Solution
Power lamp off, does not
work
No mains power supply Connect to the mains
power supply and switch
on
Power lamp on, no mist
outlet with wind
No water in water tank Fill the water tank with
water
Security switch is too
loose
Tighten the switch
Abnormal smell mist New unit Take out water tank,
open the cover, and let it
stay 12 hours in a cool
location
Dirty water or water
sitting too long
Clean water tank, fill with
clear water
Power lamp on, unit
doesn’t work
Too much scale in the
water basin
Pull out some water from
the water basin, close
the cover of water tank
tightly
Mist fog is too low Too much scale in the
water basin
Clean transducer
Water is too dirty or
water kept too long in
the tank
Clean water tank, and
change to fresh clear
water
Abnormal noise Resonant in water tank
when water is too low
Fill water into the water
tank
Unit is on a unstable
surface
Move the unit to a stable
flat surface
Mist fog coming out from
around the nozzle
There are apertures
between the nozzle and
water tank
Dip the nozzle in water
for a while and then fix it
to the socket on water
tank
16
TECHNICAL DATA
Model: POHU60
Power supply:
Power: 30W
Water tank capacity: 6L
Evaporation Rate: ≥300ml/H
Noise level: ≤40 dB(A)
Maintenance:
In a case when the water is hard which means the water
contains too much calcium and magnesium, it can cause a
“white powder” problem and leave heavy scales on the
surface of the water basin, transducer and inner surface of
the water tank. Scales on the surface of transducer will cause
the unit to work improperly.
We recommend:
1) Use cold boiled water or distilled water.
2) Clean the transducer, water tank and basin unit every
week.
3) Change the water in the water tank more often to keep it
fresh.
4) Make sure to pull out the water from the water tank and
dry the water basin before you store the unit unused for a
long period of time.
5) Clean the whole unit and make sure that all the parts of
the unit are dried completely before storing for longer
period of time.
17
220-240V~ 50/60Hz
How to clean the transducer:
1) Put 5-10 drops of cleaning abluent on the surface of the
transducer, wait for 2-5 minutes.
2) Brush off the scale from the surface.
3) Rinse the transducer with clean water.
How to clean the basin unit:
1) Clean the water basin with soft cloth and the cleaning
abluent if there is scale in it.
2) If the scale is covered on the security switch, drop the
cleaning abluent on the scale and clean it out with the
brush.
3) Rinse the water basin with clean water.
This symbol on the product or in the instructions
means that your electrical and electronic equipment should
be disposed at the end of its life separately from your house
hold waste. There are separate collection systems for
recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the
product.
18
19
Imported and Exclusively marketed by:
Power International AS,
PO Box 523, N-1471 Lørenskog, Norway
Power Norge:
https://www.power.no/kundeservice/
T: 21 00 40 00
Expert Danmark:
https://www.expert.dk/kundeservice/
T: 70 70 17 07
Power Danmark:
https://www.power.dk/kundeservice/
T: 70 33 80 80
Punkt 1 Danmark:
https://www.punkt1.dk/kundeservice/
T: 70 70 17 07
Expert Finland:
https://www.expert.fi/tuki/asiakaspalvelu/
T: 020 7100 670
Power Finland:
https://www.power.fi/tuki/asiakaspalvelu/
T: 0305 0305
Power Sverige:
https://www.power.se/kundservice/
T: 08 517 66 000
20
SIKKERHETSADVARSEL
Les alle sikkerhetsanvisningene nøye før
bruk, og oppbevar bruksanvisningen for
fremtidig referanse:
Følg alle forholdsreglene som er oppført
nedenfor for å redusere risikoen for
personskade eller elektrisk støt.
-Dette apparatet kan brukes av barn over 8 år
og personer med reduserte fysiske-,
sensoriske- eller mentale evner eller mangel på
erfaring og kunnskap hvis de er under tilsyn
eller har mottatt anvisning om bruk av
apparatet på en sikker måte og forstår farene
dette innebærer. Barn må ikke leke med
apparatet. Rengjøring og brukervedlikehold må
ikke utføres av barn uten tilsyn.
-Før du bruker dette apparatet, må du sørge for
at spenningen i strømforsyningen er den
samme som angitt på merkeskiltet på apparatet.
-Sett alltid luftfukteren på en hard, flat og stabil
overflate. Unngå direkte sollys, og hold den
alltid vekke fra vegger og varmekilder som
ovner, radiatorer osv. Advarsel: Apparatet kan
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

POINT POHU60 LUFTFUKTER Bruksanvisning

Kategori
Luftfuktare
Typ
Bruksanvisning