Samsung SR8845 Bruksanvisning

imagine the possibilities

Thank you for purchasing a Samsung product.

To receive a more complete service,

please register your product at

www.samsung.com/register

Robotic Vacuum Cleaner

User Manual

✻ Before operating this unit, please read the instructions carefully.

✻ For indoor use only.

English

SR8845

DJ68-00518L.indb 1 2010.2.22 1:3:3 PM

2_ Safety information

Safety information

CAUTION/WARNING SYMBOLS USED

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

NOTE

Explains terms to help users understand how use the product properly.

SAFETY INFORMATION

• Before operating the appliance, please read this manual thoroughly and retain

it for your reference.

• Because these following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those described

in this manual.

WARNING

DJ68-00518L.indb 2 2010.2.22 1:3:4 PM

Safety information _3

Safety information

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the

following:

READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOTIC VACUUM CLEANER.

Unplug from outlet when not in use and before conducting maintenance.

WARNING: to reduce the risk of ﬁre, electric shock, or injury:

GENERAL

• Use only as described in this manual.

•

Do not operate the robotic vacuum cleaner or charger if it has been damaged in any way.

• If the cleaner is not working as it should, has been dropped, damaged, left outdoors,

or dropped in water, return it to a customer care center.

• Do not handle the charger or robotic vacuum cleaner with wet hands.

• Use only on dry, indoor surfaces.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

BATTERY CHARGER

• Do not modify the polarized plug to t a non-polarized outlet or extension cord.

• Do not use outdoors or on wet surfaces.

• Unplug the charger from the outlet when not in use and before servicing.

• Use only the charger supplied by the manufacturer to recharge.

• Do not use with a damaged cord or plug.

• Do not pull or carry by the cord, use the cord as a handle, close the door on the cord,

or pull the cord around sharp edges or corners. Keep the cord away from heated

surfaces.

• Do not use extension cords or outlets with inadequate current carrying capacity.

• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

• Do not mutilate or incinerate batteries as they will explode at high temperatures.

• Do not attempt to open the charger. Repairs should only be carried out by a qualied

customer care centre.

• Do not expose the charger to high temperatures or allow moisture or humidity of any

kind to come into contact with the charger.

DJ68-00518L.indb 3 2010.2.22 1:3:4 PM

4_ Safety information

Safety information

SAFETY INFORMATION

02

PRODUCT FEATURES

13

TROUBLESHOOTING

40

ASSEMBLING THE CLEANER

15

OPERATING THE CLEANER

20

MAINTAIN TOOLS AND FILTER

34

PRODUCT SPECIFICATION

43

ROBOTIC VACUUM CLEANER

• Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc.

• Do not use without a lter in place. When servicing the unit, never put ngers or other

objects into the fan chamber in case the unit accidentally turns on.

• Do not put any objects into openings. Do not use with any openings blocked; keep

openings free of dust, lint, hair, and anything that may reduce air ﬂow.

• Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

• Do not use to pick up ammable or combustible liquids such as gasoline, nor use on

areas where they may be present.

• Do not use robotic vacuum cleaner in an enclosed space lled with vapours given off

by oil based paint, paint thinner, moth proong substances, ammable dust, or other

explosive or toxic vapours.

• Leaks from battery cells can occur under extreme usage or temperature conditions.

If the liquid gets on skin, wash quickly with water. If the liquid gets into the eyes,

ﬂush them immediately with clean water for a minimum of 10 minutes. Seek medical

attention.

DJ68-00518L.indb 4 2010.2.22 1:3:4 PM

Contents _5

Contents

SAFETY INFORMATION

02

06 Power related

07 Before use

10 In use

11 Cleaning and maintenance

PRODUCT FEATURES

13

13 Product Features

TROUBLESHOOTING

40

40 Checklist before svc calls

42 Troubleshooting for Error Codes

ASSEMBLING THE CLEANER

15

15 Components

16 Name of each part

OPERATING THE CLEANER

20

20 Installing robotic vacuum cleaner

20 Installation order

20 Turning the power switch on or off

21 Installing the charger

22 Charging

23 About the battery

24 Installing the VIRTUAL GUARD

26 Using robotic vacuum cleaner

26 Starting/stopping cleaning

27 Recharging

28 Auto cleaning

29 Spot cleaning

30 Max cleaning

31 Manual cleaning

32 Edge Cleaning

33 Scheduled Cleaning

MAINTAIN TOOLS AND FILTER

34

34 Cleaning robotic vacuum cleaner

34

Please keep the cleaning and maintenance methods in mind

34 Cleaning the sensor window and the camera

35 Cleaning the dust bin and the Filter

36 Cleaning the power brush

38 Cleaning the edge-cleaning side rotating brush

39 Cleaning the driving wheel

PRODUCT SPECIFICATION

43

43 Product specication

DJ68-00518L.indb 5 2010.2.22 1:3:5 PM

6_ Safety information

Safety information

POWER RELATED

Do not bend the power cord forcefully or place a

heavy object on it that could break it.

- This may result in re or electric shock.

Do not use a damaged power cord, plug, or a loose

power outlet.

- This may result in re or electric shock.

Do not use multiple plugs in a single socket.

(Do not leave the cord lying exposed on the ﬂoor.)

- This may result in re or electric shock.

Do not pull the power plug by the cord or touch the

plug with wet hands.

- This may result in re or electric shock.

Make sure to remove any dust or water from the

power plug.

- Failing to do so may result in a malfunction or electric

shock.

WARNING

DJ68-00518L.indb 6 2010.2.22 1:3:9 PM

Safety information _7

Safety information

01 SAFETY INFORMATION

CAUTION

BEFORE USE

Before activating the robotic vacuum cleaner, make sure

that the dust bin is assembled.

- If the dust bin is not inserted, robotic vacuum cleaner will not

operate.

Never use robotic vacuum cleaner in locations with

combustible material such as:

- Locations with candles or desk lamps on the oor.

- Locations with unattended res (re or embers).

- Locations with gasoline, distilled alcohol, thinner, ashtrays

with burning cigarettes, etc.

Robotic vacuum cleaner is for domestic use only. Do not use it in the following

locations.

- Attics, basements, warehouses, industrial buildings, separate rooms distant from the

main building, locations exposed to wet or damp conditions such as bathrooms or

wash rooms, and narrow and highly situated locations such as tables or shelves. Critical

damage (abnormal operation and breakage) may occur when used in these locations.

Open all doors to clean all rooms.

- When a door is closed, the robotic vacuum cleaner will not be able to enter that room.

-

However, make sure to close the doors to the main entrance, the veranda and the

bathroom, and any other rooms where the robotic vacuum cleaner may fall to a lower ﬂoor.

For carpets with long tassels, fold the tassels under the

carpet.

- Unfolded tassels may result in critical damage to the carpet

and the machine itself, as they get caught in the driving wheel

or the power brush.

When the cliff sensor is polluted, the robotic

vacuum cleaner may be in danger of falling

down the stairs.

This may cause personal injury and critical

damage to the product.

To prevent risk, install the VIRTUAL GUARDs

(Fence Mode setting) in front of dagerous

areas. Clean the sensor window and camera.

DJ68-00518L.indb 7 2010.2.22 1:3:13 PM

8_ Safety information

Safety information

BEFORE USE

Remove objects scattered on the ﬂoor before cleaning.

-

Robotic vacuum cleaner is designed to detect obstacles 5cm away

from it.

- Bath towels, pads in front of bathrooms and sinks, entrances, utility

rooms, power cords, table cloths or belts can become entangled in

the driving wheel or power brush. This can cause objects to fall from

the table.

Remove small objects or brittle items from the area to be

cleaned in advance.

- Make sure to clear any objects before cleaning.

- Make sure to remove fragile items such as china, glass objects,

ﬂowerpots, etc.

- Robotic vacuum cleaner does not recognize coins, rings or other

valuable items such as jewelry.

Inform all family members (or relevant parties) to be cautious

before cleaning or when using the Scheduled Cleaning Mode.

- Robotic vacuum cleaner may run into children, causing them to fall.

Ensure that children do not step or sit on the robotic vacuum.

- Children may fall and injure themselves or critical damage may occur

to the product.

When a child or pet is left alone, make sure to turn off the

Power Switch of the robotic vacuum cleaner.

- Robotic vacuum cleaner may attract their attention.

- When the rotating wheel or brush catches ngers, feet, clothing or hair,

this may result in injury.

- If a child or pet is in the way of the robotic vacuum cleaner, it may be

identied as an obstacle and the area may not cleaned.

- When the Power Switch is turned off, it will cut off the power supply and

deactivate all functions.

When installing the charger station, do not leave the power

cord exposed on the ﬂoor.

- When the robotic vacuum cleaner automatically recharges or passes

by the charger station, it may drag the power cord around with it.

Always keep the power cord of the charger plugged into the

outlet.

- Although the robotic vacuum cleaner has a self-charging function, if

the power cord of the charger station is unplugged, it cannot charge

its battery automatically.

CAUTION

DJ68-00518L.indb 8 2010.2.22 1:3:19 PM

Safety information _9

Safety information

01 SAFETY INFORMATION

CAUTION

BEFORE USE

Install the charger in a location that can be easily accessed

by the robotic vacuum cleaner.

- If the charger is installed in a corner, this may cause extra

movements and may disturb the automatic recharging process.

Do not use the charger for other purposes.

- This may result in critical damage to the charger or cause a re.

WARNING

Make sure the robotic vacuum cleaner does not vacuum or

move over liquids such as water, oil or pet litter.

-

This may result in critical damage to the product.

-

Liquids may spread through the wheels resulting in contamination.

WARNING

Objects in front of the charger will prevent the robotic

vacuum cleaner from auto-charging itself.

- Clear the area.

CAUTION

There should be no obstacles 0.5 m to the left and right and

within 1 m of the front.

WARNING

Make sure that there is no trace of liquids on the charger

station.

- Failing to do so may result in re or electric shock.

WARNING

Do not short-circuit the charge pins with metal objects such

as chopsticks, screwdrivers, and etc.

- This will result in critical damage to the charger.

WARNING

DJ68-00518L.indb 9 2010.2.22 1:3:33 PM

10_ Safety information

Safety information

NOTE

IN USE

You cannot use the robotic vacuum cleaner on thick carpets.

- This may result in problems with the robotic vacuum cleaner.

- This may result in damage to carpets.

Robotic vacuum cleaner may not be able to continue its

operation if it is stuck at the entrance or veranda doorsill.

- Robotic vacuum cleaner stops operating for safety reasons if it

cannot move for more than 5 minutes.

- To resume operating, turn the Power Switch off and then on again

after moving it to a location where it can continue cleaning.

If an unusual sound, smell or smoke is emitted from the robotic

vacuum cleaner, immediately turn off the Power Switch and call

the customer care center.

WARNING

Do not use the robotic vacuum cleaner on a table or other high

locations.

- This may result in damage when the unit accidentally drops.

CAUTION

Robotic vacuum cleaner may bump into furniture such as chair

legs, table legs, thin and long furniture, etc. while operating.

- For a quicker and cleaner performance, place the chairs on top of

the table.

Immediately remove any large pieces of

paper or plastic bags from the machine while cleaning.

- Using the machine for an extended period of time with its inlet port

obstructed may result in critical damage to the product.

Do not place any objects on top of the robotic vacuum cleaner.

- This may result in malfunction.

CAUTION

DJ68-00518L.indb 10 2010.2.22 1:3:51 PM

Safety information _11

Safety information

01 SAFETY INFORMATION

NOTE

IN USE

Robotic vacuum cleaner cannot completely clean

locations that it cannot reach, such as corners, and

spaces between sofas and walls.

- Please clean these locations occasionally.

Dust clusters may remain after cleaning, when the robotic vacuum cleaner fails to

pick up dust clusters that were formed while cleaning.

- In this case, sweep up the dust with another cleaning tool.

CLEANING AND MAINTENANCE

When cleaning the product, do not spray water directly onto the

exterior or wipe it with a volatile material such as benzene,

thinner or alcohol.

- This may result in critical damage to the product.

CAUTION

The unit must not be disassembled or reconstructed by anyone

other than a qualiﬁed service engineer.

- This may result in damage to the product.

CAUTION

Do not forcefully press the bumper on the robotic vacuum

cleaner.

- If the bumper sensor gets damaged, the robotic vacuum cleaner may

bump into walls or furniture.

CAUTION

Remove any foreign substances accumulated on the Obstacle

and Cliff sensors on a regular basis.

- Dirt accumulated on the sensors will result in inaccurate functioning

of the sensors.

WARNING

Cliff sensor

Obstacle

sensor

DJ68-00518L.indb 11 2010.2.22 1:3:56 PM

12_ Safety information

Safety information

CLEANING AND MAINTENANCE

Contact the Samsung Electronics customer care center to

replace the battery.

- Failing to use original batteries will result in product failure.

WARNING

If the power cord is damaged, have it replaced by a qualiﬁed

service engineer from the customer care center.

- Failing to do so may result in re or electric shock.

WARNING

Before cleaning the charger, make sure to disconnect the

power cord for safety.

WARNING

When removing foreign substances, always use the cleaning

brush after turning the Power Switch off.

- Failing to do so may result in sudden operation of the unit and

cause an injury or critical damage to the product.

WARNING

Power brush

✽ Battery information :

AA Size Ni-MH, UNION SUPPO, Model HPY, 12 (EA).

Edge-

cleaning

side brush

DJ68-00518L.indb 12 2010.2.22 1:4:45 PM

Product Features _13

Product Features

CONVENIENT VIRTUAL GUARD FUNCTION

You can conne the robotic vacuum cleaner to a particular section by using the Fence (virtual

wall) mode or by cleaning several sections one by one using the Guard (virtual door) mode.

• What is ceiling shape recognition

(Visionary mapping

TM

)?

This function recognizes the shape of

the ceiling using the camera on top

to identify the area to be cleaned and

determines the best way to pass over

and clean every section of the ﬂoor.

VARIOUS CLEANING MODES

Various cleaning modes are provided to meet all your needs.

DELICATE CLEANING OF EVERY CORNER

Since the robotic vacuum cleaner cleans the oor in a sequential way ( ) along the map

determined by the ceiling shape recognition function, it cleans every corner of the ﬂoor.

1

3

2

4

5 6

1. Auto Mode

Cleans all rooms automatically.

2. Spot Mode

Cleans a localized area intensely. It can be

used to clean bread or cookie crumbs.

3. Max Mode

Runs until the battery is nearly depleted.

4. Manual Mode

You can clean the ﬂoor manually by moving the

robotic vacuum cleaner with a remote control.

5. Edge Mode

When the Obstacle Sensor detects an obstacle

during the cleaning, the Robot Cleaner reduces

its speed to minimize the bumping impact and

the Bumper Sensor also helps it lower the

bumping impact. And, it cleans the corners by

reaching to them as close as possible.

6. Scheduled Cleaning Mode

At the specied time, the robotic vacuum

cleaner cleans the ﬂoor.

About 1.5m

DJ68-00518L.indb 13 2010.2.22 1:5:11 PM

14_ Product Features

Product Features

DOORSILL CROSSING

The robotic vacuum cleaner’s innovative driving system

makes it possible for it to cross over doorsills with a height of

about 1 cm and clean all rooms. The robotic vacuum cleaner

has been designed so that it does not cross over doorsills

that are higher than 1 cm for safety purposes.

ANTI-CRASH

The robotic vacuum cleaner detects and avoids obstacles

in 2 stages. First, the 7 obstacle sensors detect obstacles in

stage 1 and if the robotic vacuum cleaner does crash into an

obstacle, the 2 bumper sensors absorb the impact.

EDGE-CLEANING SIDE ROTATING BRUSH

The edge-cleaning side rotating brush cleans dust from the

edges.

AUTO CHARGING

When the battery is low, the robotic vacuum cleaner is

automatically guided to the charger to enable it to perform a

quick auto charge.

SAFETY DEVICE

When the robotic vacuum cleaner is lifted up while cleaning,

the driving wheels, power brush, suction motor, and side

rotating brush are stopped autonati(all) by sensor.

About 1 cm

Stair type

Vertical type

DJ68-00518L.indb 14 2010.2.22 1:6:0 PM

Assembling the cleaner _15

Assembling the cleaner

02 ASSEMBLING THE CLEANER

COMPONENTS

■

Charger (Station)

■

Main Body

■

Others Components

■

Remote Control

User Manual /

2 Batteries

VIRTUAL GUARD

Cleaning Brush

Remote Control

Holder

Spare Filter

DJ68-00518L.indb 15 2010.2.22 1:6:9 PM

16_ Assembling the cleaner

Assembling the cleaner

NAME OF EACH PART

[ Main unit ]

Side

Bottom

Front

Remote Control

Sensor

Dust Bin

Dust Bin Eject

Button

Driving Wheel

Battery Cover

Power Brush

Cover

Power Switch

Driving Wheel

Cliff Sensor

Side Brush

Cliff Sensor

Charge Pin

Cliff Sensor

Charge Pin

Roller

Operating

Button

Obstacle

Sensor

Obstacle Sensor

Bumper Sensor

Remote Control

Sensor

Display Panel

DJ68-00518L.indb 16 2010.2.22 1:6:15 PM

Assembling the cleaner _17

Assembling the cleaner

02 ASSEMBLING THE CLEANER

NAME OF EACH PART

[ Charger (Station) ]

[ VIRTUAL GUARD ]

Mode/Power Button

Distance Control

Switch

Distance Detection

Sensor

Main Body Detection

Sensor

Mode Lamp

Batteries are not supplied with the product. You have to purchase the batteries separately.

Install the alkaline batteries (type D) before use.

■

Installing the batteries

Lift the cover of the

VIRTUAL GUARD while

pressing the locking tab.

Install the batteries into the

VIRTUAL GUARD as shown

by the  gure below. (If the

batteries are installed with the

incorrect polarity, the VIRTUAL

GUARD will not work.)

After inserting the tip of

the cover into the slot,

push the other end to

close it until it clicks into

place.

1 2 3

✽ Speci cation: Alkaline Type D (LR20) batteries

Charge Pin

Remote Control

Holder

Vents

Catching Sill

Charging Lamp

Power

Lamp

DJ68-00518L.indb 17 2010.2.22 1:6:21 PM

18_ Assembling the cleaner

Assembling the cleaner

4. LOCK 삭제제되면서 번호 수정

NAME OF EACH PART

[ Remote Control ]

Lift the battery

compartment cover at

the back of the remote

control, while pressing

the locking tab.

Install the batteries into the

remote control as shown

by the  gure below. (If the

batteries are installed with

the wrong polarity, the

remote control will not work.)

After inserting the tip of

the cover into the slot,

push the other end to

close it until it clicks

into place.

1 2 3

✽ Speci cation: Alkaline type AAA batteries

Batteries are not installed in the remote control when purchasing the product.

Install the alkaline batteries (type AAA) before use.

■

Installing the Remote Control Batterise

Power

Recharging

Max

Spot

Start/Stop

Delay Start

Auto

Directional

Buttons

Manual

Edge

DJ68-00518L.indb 18 2010.2.22 1:6:27 PM

Assembling the cleaner _19

Assembling the cleaner

02 ASSEMBLING THE CLEANER

NAME OF EACH PART

[ Display panel ]

4. LOCK 삭제제되면서 번호 수정

DISPLAY PART

1. Number Display

- Shows the timer display, progress status, and error codes using numbers, letters and graphics.

2. Battery Level Indicator

- Charging: Shows the charging progress in 3 steps.

- In Use: Shows the battery charge level. The battery charge level is reduced by each level from FULL while

operating. (When the battery is fully discharged, one level will  ash to display “LO”.)

3. Scheduled Cleaning

- When cleaning is scheduled, the Scheduled Cleaning icon is lit.

4. Recharging

- This icon turns on when the robotic vacuum cleaner returns to the charger station to charge its battery.

5. Cleaning Mode Display

- Each time the cleaning mode button is pressed, the corresponding cleaning mode is displayed.

(a) Auto Mode: This icon turns on when Auto cleaning mode is selected.

(b) Spot Mode: This icon turns on when Spot cleaning mode is selected.

(c) Max Mode: This icon turns on when Max cleaning mode is selected.

(d) Manual Mode: This icon turns on when Manual cleaning mode is selected.

(e) Edge Mode : "

" is on when Edge cleaning mode is selected.

BUTTON PART

6. Start/Stop

- Press to start/stop cleaning.

7. Cleaning Mode

-

Press to select a cleaning mode. After selecting a cleaning mode, press the ( ) button to start cleaning.

8. Delay Start

- Press to schedule a cleaning. You can delay a cleaning up to 23 hours.

9. Recharging

- When this button is pressed, the Recharging icon is turned on and robotic vacuum cleaner will return to

the charger station to charge its battery.

1

2

4

8 97

6

3

5

DJ68-00518L.indb 19 2010.2.22 1:6:30 PM

20_ Operating the cleaner

Operating the cleaner

INSTALLATION ORDER

1. Turning the Power Switch on or off

To use the robotic vacuum cleaner, you must turn on the Power Switch at the

bottom of the main unit.

2. Installing the Charger

To charge the robotic vacuum cleaner, you must rst install

the charger.

Since the battery is discharged when the product is

purchased, you must fully charge the battery before use.

3. Charging the Battery

You should charge the battery completely before using the

robotic vacuum cleaner.

4. Installing the VIRTUAL GUARD

You can conne the robotic vacuum cleaner to a particular

section by using Fence (virtual wall) mode or clean several

sections one by one using Guard (virtual door) mode.

INSTALLING THE ROBOTIC VACUUM CLEANER

TURNING THE POWER SWITCH ON OR OFF

CAUTION

If the Power Switch is turned off, the robotic vacuum cleaner will not be charged

even if it is docked with the charger station.

To use the robotic vacuum cleaner, you must turn the

Power Switch on.

If you turn the Power Switch off, all settings will be reset.

1. Turn over the main unit and turn the Power

Switch on.

- If the icons are not turned on, it indicates that the

battery charge is depleted. In this case, dock the robotic

vacuum cleaner to the charger station after turning the

Power Switch on.

- Note that turning the Power Switch off will reset all

settings.

DJ68-00518L.indb 20 2010.2.22 1:6:33 PM

Sidan laddas ...

Samsung SR8845 Bruksanvisning

Samsung SR8845 Bruksanvisning

på andra språk

Relaterade papper

Andra dokument