Ohlins HO702 Mounting Instruction

Kategori
Motorcykel tillbehör
Typ
Mounting Instruction
MOUNTING INSTRUCTION
Brand
HONDA
Model
CBR 600 F
Year
1997
Art. No.
HO 702
Total length
287
+12
0 mm
Stroke
53
mm
Reb.click
12
Comp.click
10
Preload
13 mm
mm
Supplementary parts
192-01
231-01
643-02
710-02
1180-01
Sticker / Dekal (2x)
Ty-rap / Buntband (2x)
Hose clamp / Slangklämma
C-spanner / Haknyckel
Memo sticker / Memo dekal
Owners manual / Bruksanvisning
Mounting instructions
1.
Ställ MC:n på centralstödet, plocka bort
sidopanelerna.
2.
Demontera bakskärm och kedjeskydd.
3.
Lossa de båda stötdämparskruvarna,
slangkmman som håller gasbehållaren
och slangen. Demontera
orginaldämparen från MC:n.
4.
Montering av Öhlindämparen:
För ut gasbehållaren på höger sida,
montera övre stötdämparskruven. Lyft
hjulet något och montera den nedre
fästskruven. Montera olje/gasbehållaren i
originalfästet med slangklämman (643-
02). Fila dockrst av den lilla piggen i
fästet för standardbehållaren.Bind upp
slangen med buntbanden (231-01)
5.
Se till att samtliga skruvar är åtdragna
och att inget tar i när hjulet fjädrar in.
6.
Montera bakskärm, kedjeskydd och
sidopaneler.
1.
Place the motorcycle on the center
stand. Remove the side covers.
2.
Remove the rear mud guard / chain
cover.
3.
Loosen the standard reservoir and hose.
Loosen the lower and upper shock
absorber mounting bolts. Remove the
standard shock absorber.
4.
Mounting the Öhlins shock:
Place the reservoir on the bike in the
standard bracket, but do first remove the
little knob on the bracket. Mount the
upper and lower shock absorber
mounting bolts. Mount the reservoir
with the hose clamp (643-02). Tie up the
hose with the ty-raps (231-01).
5.
Check that all bolts are tightened and
that there are no clearance problems
when the rear wheel is moving.
6.
Mount rear mud guard, chain cover and
side panels.
Groove / Sr
Lock nut /Låsmutter
På denna modell finns en ändögla/bygel monterad
som är justerbar på längden.
Öglan/bygeln får ej skruvas ut längre än att spåret
blir helt synligt under låsmuttern. Se skiss. Se till
att låsmuttern är fastdragen efter justering.
This model has an adjustable end eye/bracket
mounted. The end eye/bracket must not be threaded
out more than that the groove is visible beneath the
lock nut. See fig. Make shure that the lock nut is
tightened after adjustment
Öhlins Racing AB frånsäger sig allt ansvar för
skada på stötdämpare, motorcykel eller person om
inte monterings- och skötsel instruktionerna har
följts till fullo. Ingen garanti kan ges på funktion
eller livslängd om dessa instruktioner inte följts
Öhlins Racing AB can not be responsible for any
damage to shock absorber, motorcycle or person if
the mounting- and maintaining instructions are not
followed exactly. Also no guarantee can be given
for the performance and reliability if these
instructions are not followed.
1 / 1

Ohlins HO702 Mounting Instruction

Kategori
Motorcykel tillbehör
Typ
Mounting Instruction

på andra språk