Silvercrest KH 2299 Bruksanvisningar

Typ
Bruksanvisningar
KH 2299
KOMPERNASS GMBH
BURGSTRASSE 21 ⋅ D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH 2299-1/10-V4
3
Undercupboard Radio
Operating manual
Uppoasennettava radio
Käyttöohje
Radio
Bruksanvisning
Radio til underbygning
Betjeningsvejledning
Ραδιόφωνο κουζίνας
Οδηγίαχρήσης
Unterbau-Radio
Bedienungsanleitung
Undercupboard Radio
KH 2299
- 1 -
INDEX PAGE
Intended Use 2
Items supplied 2
Technical data 2
Safety instructions 3
The appliance components 6
Setting up the appliance 6
Fixing the kitchen radio
beneath a wall cabinet 7
Setting up the kitchen radio 7
The Settings menu 8
Further setting possibilities 10
Radio operation 12
Cleaning 16
Disposal 16
CE Conformity 17
Importer 17
Warranty and Service 17
Read the operating instructions carefully before using the
appliance for the rst time and preserve this booklet for later
reference. Pass this booklet on to whoever might acquire the
appliance at a future date.
- 2 -
Intended Use
This Kitchen Radio is intended for use either free-standing or
for assembly beneath a wall cabinet. The intended uses for
this Kitchen Radio are the reception of FM radio transmissions
and as an alarm/timer, using either signal tones or the radio
itself.
This Kitchen Radio is not intended for utilisation in commercial
or industrial applications. The warranty does not provide
compensation for damage caused by improper use of the
appliance!
Items supplied
1 Kitchen radio KH 2299
1 Mounting plate
4 Screws
1 Operating manual
Technical data
Power supply: 220 - 240 V
~
, 50 Hz
Power consumption:
Operation: 5 W
Standby: approx. 1.8 W
Output level: 1 W at 10% THD
Frequency range UKW (FM) 87.5 – 108 MHz
MW (AM) 526,5 1606,5 kHz
Operating temperature: +5
~
+35°C
Humidity: 5
~
90 %
(No condensation)
Dimensions
(W x H x D): 27,5 x 15,7 x 6,4 cm
Weight: 1.070 g
Protection class: II /
Backup batteries 2 x 1.5 V Type AAA/Micro
(not supplied)
The technical features of this appliance enable an adjustable
reception capability that exceeds the permitted frequency
range of 87,5–108 MHz and 526,5–1606,5 kHz. In
some countries, dierent national regulations may apply to the
assigned radio frequency ranges. Please note that informa-
tion received outside of the assigned radio frequency ranges
may not be utilised, passed on to third parties or otherwise
misused.
- 3 -
Safety instructions
This appliance is not intended for use by individuals
(including children) with restricted physical, physiological
or intellectual abilities or deciencies in experience
and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person
instruction in how the appliance is to be used. Children
should be supervised to ensure that they do not play
with the appliance.
Always remove the power plug before cleaning the
appliance.
Check the appliance and all parts for visible damages.
The safety concept can work only if the appliance is in a
faultless condition.
The power plug must always be easily accessible, so
that in the event of an emergency the appliance can
be quickly disconnected from the mains power supply.
Risk of electrical shocks.
Connect the appliance only to correctly installed and
earthed mains power sockets. Ensure that the rating of
the local power supply tallies completely with the details
given on the rating plate of the appliance.
Arrange for Customer Services to repair or replace
connecting cables and/or appliances that are not
functioning properly or have been damaged.
NEVER submerse the appliance in water. Wipe it only
with a slightly damp cloth.
Do not expose the appliance to rain and never use it in
a humid or wet environment.
Always take hold of the power cable by the plug.
Do not pull on the cable itself and never touch the power
cable with wet hands, this could result in either a short
circuit or you receiving an electric shock.
Do not place the appliance, furniture or anything else
on the power cable and ensure that it does not become
clamped.
NEVER make a knot in the power cable and do NOT
bind it together with other cables. The power cable
should be positioned so that no one can step on or trip
over it.
Ensure that the power cable does not become wet dur-
ing operation.
- 4 -
You are not permitted to open the appliance housing or
repair the appliance. If the housing is opened, you run
the risk of receiving a potentially fatal electric shock and
the warranty lapses.
Protect the appliance against drip and spray water.
Do not place any water-lled vessels (e.g. ower vases)
on or near the appliance.
Riskofre!
Do not use the appliance near hot surfaces.
Do not place the appliance in locations that are subject
to direct sunlight. Otherwise, it may overheat and become
irreparably damaged.
Do not locate the kitchen radio directly above hotplates.
The kitchen radio may be damaged. There is a danger
of re!
Never leave the appliance unattended while it is being
used.
Never cover the ventilation slots of the appliance while
it is on.
Do not place open re sources, such as candles, on or
near the appliance.
Riskofpersonalinjury!
Keep the power cable and appliance away from children.
Children frequently underestimate the dangers of electrical
appliances.
Provide a stable location for the appliance.
Do not operate the appliance if it has sustained a fall or
is damaged.
Arrange for the appliance to be checked and/or repaired
by qualied technicians.
Keep batteries well away from children. Children can
put batteries into their mouths and swallow them.
If a battery is swallowed medical assistance must be
sought immediately.
Note:
Some aggressive furniture nishes can have a destructive
inuence on the appliance's rubber pads. If necessary,
place the appliance on a nonslip pad.
Thunderstorms!
Equipment connected to a power supply can be damaged
during a thunderstorm. You should therefore always
remove the plug from the power socket when there is
a storm.
- 5 -
Notice regarding separation from mains-power
The ON/AOT/OFF switch does not completely discon-
nect the appliance from the power network. Addition-
ally, the appliance consumes power when in standby-
mode.
To completely separate the appliance from mains power,
the power plug MUST be removed from the mains power
socket.
Notice regarding electrical power surges (EFT /
electrical fast transient) and electrostatic
discharges:
In a case of malfunction due to an electrical fast transient
(power surge) and/or electrostatic discharge, the appliance
must be returned to default settings in order to re-establish
normal operation. Possibly the power supply must be
separated and then reconnected. The batteries (if present)
must be removed and then reinserted.
Information regarding the handling of batteries
The appliance uses batteries for memory conservation.
For the handling of batteries please observe the following:
Riskofexplosion!
Do not throw batteries into a re. Do not recharge the
batteries.
Never open batteries, never solder or weld batteries.
The risk of explosions and injuries exists!
Regularly check the condition of the batteries. Leaking
batteries can cause damage to the appliance.
If you do not intend to use the appliance for an extended
period, remove the batteries.
Should the batteries leak, put on a pair of protective
gloves and clean the battery compartment and terminals
with a dry cloth.
Important!
No liability/warranty will be considered for damage
to the Kitchen Radio caused by the eects of moisture,
water penetration or overheating!
- 6 -
The appliance components
q Mounting plate/Baseplate
w Power cable
e Wire aerial
ti M1–M4 - Memory buttons M1–M4
o MEM/AMS - to save and automatically search
for and save radio stations
a MEM.SCAN - automatic recall of saved radio
stations
s TIMER - controls the timer programming
d Illuminated clamp strip
f AL2/VOL — - controls the alarm function 2
- Volume reduction
g AL1/VOL + - controls the alarm function 1
- Volume increase
h USER/BAND - User switching,
Radio waveband switching
j LIGHT/DIMMER - controls the display and
clamp strip illumination
k MODE/LOCK - recalls the settings,
Button lock
l DOWN - Selection button down
1( UP - Selection button up
2) Battery compartment
2! ON/AOT/OFF - Switch the radio on/o
controls the switch o timer
Setting up the appliance
First take all appliance components from the packaging and
remove all packing foil and tape.
Inserting the back-up batteries
The back-up batteries ensure that the time, date and alarm
time setting are not lost in the event of a power cut. For this
you require two 1.5 V batteries of the type AAA/Micro.
They are not supplied.
1. Open the lid of the battery compartment 2) on the under-
side of the kitchen radio.
2. Insert the batteries. Make sure the polarities are correct.
Otherwise, the memory receipt will not function and dam-
age may be caused to the appliance.
3. Close the lid of the battery compartment 2). The lid must
audibly engage.
- 7 -
Note:
The back-up batteries must be checked at least once
per year and, if necessary, exchanged for new ones.
Fixing the kitchen radio beneath a wall cabinet
With the supplied mounting plate q you can x the kitchen
radio below, for example, a kitchen wall cabinet:
1. Determine a suitable location for the kitchen radio.
2. Press the two retaining levers on the back of the appliance
down. Push the mounting plate q back and remove it.
3. Hold the mounting plate q under the installation location.
Thereby, the front edge of the mounting plate q should
be approx. 3.5 cm behind the front of the kitchen cabinet..
4. Mark the four points for the drillholes with a pencil.
5. Using a spike, make a small depression at the marking
points. Firmly secure the mounting plate q with the sup-
plied screws.
6. Hold the kitchen radio slanted, with the two recesses in
the retaining lugs on the mounting plate q.
Press the kitchen radio upwards until it audibly engages.
Disassembly
To disassemble the kitchen radio, press the two retaining
levers at the rear of the appliance downwards. Then pull
the radio out to the front and remove it.
Unscrew the screws and remove the assembly plate q.
Setting up the kitchen radio
Do not set the kitchen radio up without the mounting plate
q. Otherwise the speakers are covered and the sound is
scarcely audible.
To t the kitchen radio with the supplied mounting plate q:
1. Simultaneously press the two retaining levers on the back
of the appliance down.
Push the mounting plate q back and remove it.
2. Push the two retainer lugs on the mounting plate q into
the recesses on the lower rear side of the kitchen radio.
3. Press the mounting plate q rmly in the direction of the
appliance rear until it audibly engages.
- 8 -
Providing mains power
When you have completed installation of the appliance,
insert the plug into a mains power socket. The display r
is illuminated and the appliance tries to receive an RDS
signal to automatically adjust the time and date.
For as long as the appliance waits for the RDS signal,
the display r shows "Please wait for setting thanks".
This can take several minutes.
The Settings menu
Setting the time
Should this not succeed, you must set the clock manually. For
this, the radio cannot be switched on (= automatic mode).
1. In automatic mode press the button MODE/LOCK k
once. The time display blinks.
2.Press the buttons UP/DOWN 1(/l to set the time in
minute intervals. Pressing and holding the button changes
the time at ten-minute intervals.
3. Press the button MODE/LOCK k once again to save the
time and switch to the date setting.
If you do not press a button for 10 seconds when making the
settings, the appliance saves the current setting and returns to
automatic mode.
Setting the date
1. In automatic mode press the button MODE/LOCK k
twice. In the display r appears "01.01.2010", the date dis-
play ashes.
2. Press the buttons UP/DOWN 1(/l to set the date
at day intervals. Pressing and holding the buttons chang-
es the date at intervals of 10 days.
3. Press the button MODE/LOCK k once again to save the
date and to switch to setting the memory function.
If you later press the DOWN button l in automatic mode,
the display r briey shows "DAY". Subsequently, the time
and date display alternate themselves. To switch back to an
exclusive time display, press the button DOWN l once
again.
Setting the memory functions
You can programme in up to 6 dates, which the appliance
will remind you of when they are reached.
1. In automatic mode press the button MODE/LOCK k
three times. The display r shows alternatively a date and
the SDA 1 indicator for reminder date 1.
- 9 -
2.Press the buttons UP/DOWN 1(/l to set the rst
desired reminder date. Pressing and holding the buttons
changes the date at intervals of 10 days.
3. When you press the button TIMER s, the year number is
deactivated and thus you are reminded on this date every
year.
4. Should you wish to programme in further dates, press the
button MEM.SCAN a to select the desired memory posi-
tions 2-6.
5. Follow the same steps with the other dates.
6. To deactivate the memory function, programme in a date
that lies in the past.
7. Press the button MODE/LOCK k once again to save the
settings of the memory function and to switch to setting
the update function.
Setting the update function
Using this function, the appliance can automatically update
the settings for the clock based on the RDS data.
1. In automatic mode press the button MODE/LOCK k four
times. The display r shows "UP DATE".
2.Press the button DOWN l, to deactivate the Actual-
isation function. The blinking clock symbol in the dis-
play r then disappears.
3.Press the button UP 1( to reactivate the update function.
The hour symbol appears.
4. Press the button MODE/LOCK k once again to save the
settings of the update function and to switch to setting the
12 or 24 hour mode.
Selecting 12 or 24 hour time display
1. In automatic mode press the button MODE/LOCK k
ve times. In the display r appears "24 HOUR" for the 24
hour modus.
2. Press the button DOWN l to select the 12 hour
modus. In the display r appears "12 HOUR". Press the but-
ton UP 1( to return to the 24 hour modus.
In the 12 hour mode "AM" appears between 0:00 and
11:59 (ante meridiem = mornings) behind the time display,
from 12:00 to 23:59 "PM" (post meridiem = afternoons) is
shown in the display r.
Press the button MODE/LOCK k to save the menu settings
and to close it down.
- 10 -
Further setting possibilities
Setting the display brightness
Press the button LIGHT/DIMMER j repeatedly to set the
brightness level at which the display should be illuminated.
The brightness can be set at 3 levels.
Illuminated clamp strip
Documents, for example recipes, with a width of up to 10 cm
can be inserted and automatically held in the clamp strip d.
If you press and hold the button LIGHT/DIMMER j for two
seconds, the downward facing lamp is switched on, which
then illuminates the recipe. Press and hold the button j once
again for two seconds to switch the lamp o.
Kitchen timer
1. Press the button TIMER s.
2. Using the buttons UP/DOWN 1(/l, set the desired
time interval (a time span between 1 minute and 23:59
h is possible). Pressing and holding one of the buttons
changes the display in ten-minute intervals. Or press one
of the buttons M1–M4 ti to recall a saved preset
time for the kitchen timer. The following times are factory
pre-programmed:
Button M1 t = 5 min. (Indicator = T1)
Button M2 y = 10 min. (Indicator = T2)
Button M3 u = 15 min. (Indicator = T3)
Button M4 i = 20 min. (Indicator = T4)
3. Press the button TIMER s once again to start the kitchen
timer. In the display r a clock icon running in reverse
and a cooking pot symbol appears.
4. From 30 seconds before expiry of the time span an acoustic
signal sounds, repeating at shorter intervals the closer the
set time approaches. When the time has expired, the alarm
sounds continuously and with increasing volume.
5. Press the button TIMER s to terminate the acoustic signal.
Interrupting the kitchen timer.
To interrupt the kitchen timer, switch to the kitchen timer
mode by pressing the button TIMER s.
Then briey press the button TIMER s to interrupt the
kitchen timer.
The time is halted, the indicator blinks for 10 seconds. After
this period the appliance returns to automatic modus. To
restart the kitchen timer, briey press the button TIMER s
again to switch back into the kitchen timer mode.
- 11 -
Press the button TIMER s once again. The time then con-
tinues to run.
To completely switch the kitchen timer o, press and hold
the button TIMER s for 3 seconds The clock and cooking
pot symbol disappear.
Programming the kitchen timer
You can programme frequently used times for the kitchen
timer into the appliance, so that you do not need to enter
them in repeatedly. As the appliance can be used by several
people, it has user switching, A/B. Both users can save 4 dif-
ferent timer periods each.
1. First, select the desired user. To switch between users, press
and hold the button USER/BAND h for two seconds.
2. Then press the button TIMER s.
3.Using the buttons UP/DOWN 1(/l enter in the
desired time.
4. Press the button MEM/AMS o. On the right and next to
the time indicator, "T" lights up.
5. Press one of the pre-set buttons M1–M4 ti, under
which the kitchen timer period should be saved. Its
number is now shown to the right of the "T".
6. Press the button MEM/AMS o once again to conclude
the saving.
Setting alarm times (Alarms 1 and 2)
You can programme two alarm times into your kitchen radio.
Alarm function
Symbol in the display r
Acoustic signal
Radio
Switched o no symbol
1. In automatic mode press the button AL1/VOL. + g (or
AL2/VOL. – f). In the display r the last set alarm time
and the symbol for the type of alarm blink for 10 seconds.
2. Press the buttons UP/DOWN 1(/l to set the desired
alarm time.
3. Press the button AL1/VOL. + g (or AL2/VOL. – f) re-
peatedly until the desired alarm function (see the table
above) is indicated in the display r.
4. Repeatedly press the button TIMER s to set the weekdays
on which you require the alarm function: You can select
- 12 -
between "workdays" (Mo, Tu, We, Th, Fr), "weekends"
(Su, Sa) and "every day" (Su, Mo, Tu, We, Th, Fr, Sa).
Thereby, orientate yourself on the weekday indicator in
the display r:
Mo = Monday
Tu = Tuesday
We = Wednesday
Th = Thursday
Fr = Friday
Sa = Saturday
Su = Sunday.
5. If you hold the button TIMER s pressed down for 2 sec-
onds, you can also, through repeated brief pressing of
the TIMER s button, select a specic weekday (e.g. only
"We"). The selected setting is indicated in the display r.
6. To return to the selection of workdays, weekends or
whole weeks, once again hold the button TIMER s
pressed down for 2 seconds.
7. After 10 seconds the blinking in the display stops and
your input is saved. The appliance then returns to auto-
matic modus.
When the alarm signal sounds...
and the alarm function "Radio" has been selected, the
radio plays for one hour at a pre-dened alarm volume.
To halt it, press the button AL1/VOL. + g (or AL2/VOL. –
f).
and the alarm function "Signaltones" has been selected,
the signal tone sounds for 10 minutes, with an increasing
volume. To halt it, press the button AL1/VOL. + g (or AL2/
VOL. – f).
The Reminder function
The appliance can remind you of a date that you have
set with the reminder function. In these cases, from 8:00 –
23:00 on that day, and at every full hour, the acoustic alarm
sounds for 10 minutes. In addition, the SDA-panel in the dis-
play r blinks. To stop the reminder alarm, press any button.
Radio operation
For radio reception, completely unwind the wire aerial e
and, with the radio switched on, determine the most favour-
able positioning for it. The appliance has a built-in ferrite
aerial for the reception of MW transmitters. Should the MW
reception be insucient, please turn the appliance towards a
more favourable direction.
- 13 -
Switching the radio on and off
1. To switch the radio function on, press the button ON/
AOT/OFF 2!. In the display r the currently selected
frequency is shown.
2. Press the button ON/AOT/OFF 2! once again to switch
the radio o and return the appliance to the automatic
modus.
Note:
By pressing and holding the button ON/AOT/OFF
2! you switch to the function switch-o time (see S. 15
chapter AOT Switch-o timer).
Manual station selection
1. Using the button USER/BAND h, select the required
radio frequency: MW (AM) or VHF (FM).
2.Briey press the button UP 1( repeatedly to search for
stations with a higher frequency than the one shown in
the display r.
3. Briey press the button DOWN l repeatedly to search
for stations with a lower frequency than the one shown in
the display r.
4. Should the currently selected radio station transmit RDS
data, the -indicator lights-up in the display r.
Then the display r shows the name of the radio station,
and the time is updated (if activated in the settings, see
section "Setting Update function").
Automatic station search
You can have the kitchen radio search for stations.
The kitchen radio searches the frequency range until it nds
a station.
1. Press and hold the button UP 1( for two seconds: the
kitchen radio searches for the station with the next highest
frequency.
2. Press and hold the button DOWN l for two seconds:
the kitchen radio searches for the station with the next
lowest frequency.
Repeat these steps until you have found a radio station to
your liking.
Save and recall a radio station manually
As the appliance can be used by numerous people, it is tted
with user switching, A/B. Both users can save dierent radio
stations. To switch between users, press and hold the button
USER/BAND h for two seconds.
- 14 -
Each user can save 36 radio stations in the appliance.
32 x VHF stations and 4 x MW stations. For saving UKW
stations, User "A" has available:
Preset button M1 t for the save positions A1 – A8,
Preset button M2 y for the save positions B1 – B8,
Preset button M3 u for the save positions C1 – C8, and
Preset button M4 i for the save positions D1 – D8.
Available for User "B" are:
Preset button M1 t for the save positions 11 – 18,
Preset button M2 y for the save positions 21 – 28,
Preset button M3 u for the save positions 31 – 38, and
Preset button M4 i for the save positions 41 – 48.
Press the corresponding preset button once to address the
save position "1", press twice for "2", etc.
With MW radio stations, each preset button is for one of the
4 save positions.
1. Setting the user, the desired radio wavelength and the
desired radio station.
2. Press the button MEM/AMS o. In the display r the save
position indicator and "MEM" blink.
3. Press one of preset buttons M1–M4 ti, if necessary
repeatedly, to save the radio station to the desired save
position. In the display r, the indicator for the save posi-
tion selected by you and "MEM" blink.
4. Press the button MEM/AMS o once again. "MEM" and
the save position are constantly indicated, the radio
station is saved.
5. Repeat the steps 1 to 4 (for both users) until all of the de-
sired radio stations are saved.
6. To recall the saved radio stations, press the correspond-
ing preset buttons (M1–M4 ti) in radio mode, sever-
al times if need be, until the number of the saved position
appears in the display r.
Automatically save and recall a radio station
With the AMS function (Automatic Memory System), the
radio automatically searches for radio stations and then
saves them to the available save positions in the radio wave-
band. Previously saved radio stations are thereby erased.
1. Press and hold the button MEM/AMS o for two sec-
onds. The kitchen radio automatically searches for suf-
ciently powerful radio stations and saves them in the
memory.
2. The station search can be stopped by pressing on the button
MEM/AMS o. The most recently found radio station plays.
- 15 -
3. When you press the button MEM.SCAN a, the saved
radio stations are recalled in their sequence and each is
played for 10 seconds.
4. To quickly move on to another radio station, press the but-
ton MEM.SCAN a.
5. To quit the automatic recall, press the button MODE/
LOCK k. The display r will then show the time for 10
seconds.
Adjusting the volume.
To reduce the sound volume, in radio operation repeat-
edly press the button AL2/VOL — f, or hold the button
down.
To increase the sound volume, in radio operation repeat-
edly press the button AL1/VOL. + g, or hold the button
down.
Lock function
You can lock the kitchen radio so that settings cannot be al-
tered by unauthorised people or children.
Press and hold the button MODE/LOCK k for 3 seconds. A
key symbol appears in the display r.
When a key is pressed and the lock is activated, the key
symbol blinks but no other functions are carried out.
To disable the lock function, press and hold the button
MODE/LOCK k until the key symbol extinguishes.
A.O.T. - Switch-off timer
This appliance istted with a switch-o timer for up to 90
minutes.
1. With the radio switched on, press the button ON/AOT/
OFF 2! down for 2 seconds to recall the function.
2. Repeatedly press the button ON/AOT/OFF 2! to pro-
gramme in the number of minutes, in increments of 5
minutes, for which the appliance is to remain switched on.
After a few seconds the display again shows the radio
station currently being played.
3. On expiry of the time period the appliance switches itself
o.
4. To simply switch the radio function o, press the button
ON/AOT/OFF 2!.
- 16 -
Cleaning
Warning!
Always remove the plug before cleaning the appliance!
Moisture penetrating into the appliance creates the risk
of electric shock! Additionally, the kitchen radio could
become irreparably damaged!
Clean the housing of the kitchen radio with a slightly moist
cloth and a mild detergent only. Ensure that moisture cannot
permeate into the appliance during cleaning!
Disposal
Do not dispose of the appliance in your normal
domestic waste. This product is subject to the
provisions of European Directive 2002/96/EC.
Disposing of the appliance
Arrange for the product, or parts of it, to be disposed of
by a professional disposal company or by your communal
waste facility.
Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
Disposal of batteries/accumulators
Used batteries/rechargeable batteries may not be
disposed of in household waste.
Batteries/rechargeable batteries can contain toxic
substances which may damage the environment. There-
fore, dispose of the batteries/rechargeable batteries in
accordance with statutory regulations.
Every consumer is statutorily obliged to dispose of bat-
teries/rechargeable batteries to a community collection
centre in their district or to a dealer. The purpose of this
obligation is to ensure that batteries are disposed of in a
non-polluting manner.
Only dispose of batteries when they are fully discharged.
Disposal of packaging
Dispose of all packaging materials in an environmentally
friendly manner.
- 17 -
CE Conformity
This device complies, regarding conformity, to the basic
requirements and other relevent provisions of the Low Volt-
age Directive 2004/108/EC, the Directive for Low Voltage
Appliances 2006/95/EC and the Eco Design Directive
2009/125/EC (Ordinance 1275/2008 Appendix II,
Number 1).
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
Warranty and Service
The warranty for this appliance is for 3 years from the date
of purchase. The appliance has been manufactured with
care and meticulously examined before delivery. Please re-
tain your receipt as proof of purchase. In the event of a war-
ranty claim, please make contact by telephone with our Serv-
ice Department. Only in this way can a post-free despatch
for your goods be assured.
The warranty covers only claims for material and maufactur-
ing defects, but not for transport damage, for wearing parts
or for damage to fragile components, e.g. buttons or batter-
ies. This product is for private use only and is not intended for
commercial use.
The warranty is void in the case of abusive and improper
handling, use of force and internal tampering not carried out
by our authorized service branch. Your statutory rights are
not restricted in any way by this warranty.
The warranty period will not be extended by repairs made
unter warranty. This applies alsoto replaced and repaired
parts. Any damage and defects extant on purchase must be
reported immediately after unpacking the appliance, at the
latest, two days after the purchase date. Repairs made after
the expiration of the warranty period are subject to payment.
DES Ltd
Tel.: 0871 5000 700 (£ 0.10 / minute)
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
- 18 -
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106

Silvercrest KH 2299 Bruksanvisningar

Typ
Bruksanvisningar