Sentiotec CP-RM-35 Concept R Mini Sauna Heater Användarmanual

Version 02/21 Ident. no. CP-RM-MA

INSTRUCTIONS FOR INSTALLATION AND USE

English

EN

DE

FR

IT

NL

SV

CS

SL

FI

Sauna heater

Concept R mini

CP-RM-35 / 1-030-892: Concept R mini 3.5 kW

CP-RM-45 / 1-030-962: Concept R mini 4.5 kW

CP-RM-60 / 1-030-984: Concept R mini 6.0 kW

CP-RM-75 / 1-038-852: Concept R mini 7.5 kW

Table of Contents

1. About this instruction manual 4

2. Important information for your safety 5

2.1. Intended use 5

2.2. Safety information for the installer 6

2.3. Safety information for the user 7

3. Product description 9

3.1. Scope of delivery 9

3.2. Accessories 9

3.3. Product functions 9

4. Installation and connection 10

4.1. Installation location and sensor position 10

4.2. Safety distances 11

4.3. Installation on the cabin wall 12

4.4. Installation with foot (optional) 14

4.5. Connection diagram for 400 V 3N~ 16

4.6. Connection diagram for 230 V 3~ 16

4.7. Connection diagram for 230 V 1N~ 17

4.8. Wiring diagrams 18

4.9. Electrical connection 19

5. Commissioning 20

5.1. Filling the stone container 20

5.2.Heatingforthersttime 21

EN

6. Operation 22

6.1. Operating the sauna heater 22

6.2. Infusion 22

7. Maintenance 23

7.1. Extended periods of non-use 23

7.2. Cleaning the sauna heater 23

7.3. Changing the sauna stones 23

8. Disposal 24

9. Problem-solving by the installer 24

10. Dimensions 25

11. Technical data 26

Instructions for installation and use p. 4/26

1. About this instruction manual

Carefully read these instructions for installation and use, and keep them near

the sauna. This ensures that you can refer to information about your safety and

the operation at any time.

Symbols used for warning notices

In these instructions for installation and use, a warning notice located next to

an activity indicates that this activity poses a risk. Always observe the warning

notices. This prevents damage to property and injuries, which in the worst case

may be fatal.

The warning notices contain keywords, which have the following meanings:

DANGER!

Serious or fatal injury will occur if this warning notice is not observed.

WARNING!

Serious or fatal injury can occur if this warning notice is not observed.

CAUTION!

Minor injuries can occur if this warning notice is not observed.

ATTENTION!

This keyword is a warning that damage to property can occur.

Other symbols

This symbol indicates tips and useful information.

Do not cover Read the operating instructions

These installation and operating instructions can also be found in the

downloads section of our website: www.sentiotec.com/downloads.

EN

Instructions for installation and use p. 5/26

2. Important information for your safety

The Concept R mini sauna heater has been produced in accordance

with the applicable safety rules and regulations. However, hazards

may occur during use. Therefore adhere to the following safety in-

formationandthespecicwarningnoticesintheindividualchapters.

2.1. Intended use

The Concept R mini sauna heater is intended solely for heating

sauna cabins, in conjunction with a sauna control unit which does

not include a remote start function.

The Concept R mini sauna heater can also be used with a sauna

control unit with a remote start function, but only in conjunction with

the optional safety shutdown feature.

The Concept R mini sauna heater can also be used in public saunas,

but only in conjunction with the optional safety shutdown feature.

Any use exceeding this scope is considered improper use. Improper

use can result in damage to the product, severe injuries or death.

Instructions for installation and use p. 6/26

2.2. Safety information for the installer

●Installing and connecting the sauna heater may only be performed

when the power supply is disconnected.

●Installationmayonlybeperformedbyaqualiedelectricianor

similarlyqualiedperson.

●A fully disconnecting all-pole isolating device compliant with

overvoltagecategoryIIImustbettedonsite.

●Always use silicone cables that are heat-resistant up to 150 °C

to connect the sauna heater.

●Only install one sauna heater in the cabin. The Concept R mini

sauna heater must not be used together with other sauna heaters

in a sauna cabin.

●The roof and walls of the sauna cabin must be manufactured

from low-resin, untreated or thermally treated wood, e.g. Nordic

spruce,hemlock,pineorr,orfromlaminatedwoodenmateri-

als. If laminated wooden materials are used, make sure that the

adhesiveusedinthemdoesnotgiveoformaldehyde.Ifother

materials than wood are used in the sauna cabin, these materi-

als must be heat-resistant and corrosion-resistant and must not

causeanynegativeeectsonthehealthofthesaunausers.

●The height of the sauna cabin must be at least 1.9 m.

● Observethespecicationsonvolumesandonventilationofthe

sauna cabin in chapter 11. Technical data.

●When positioning the sauna heater, observe the minimum safety

distances (see chapter 4.2. Safety distances).

●Also comply with the regulations applicable at the installation

location.

●For your own safety, consult your supplier in the event of prob-

lemsthatarenotexplainedinsucientdetailintheinstallation

instructions.

EN

Instructions for installation and use p. 7/26

2.3. Safety information for the user

●The device must not be used by children under 8 years of age.

●The device may only be used by children over 8 years of age,

by persons with limited psychological, sensory or mental capa-

bilities or by persons with lack of experience/knowledge under

the following conditions:

– They are supervised.

– They have been shown how to use the device safely and

are aware of the hazards that could occur.

●Children must not play with the device.

●Children under 14 years of age may only clean the device if they

are supervised.

● Forhealthreasons,donotusethesaunawhenundertheinu-

ence of alcohol, medication or drugs.

●Never operate the sauna heater without sauna stones, as this

cancauseres.

Instructions for installation and use p. 8/26

●Makesurethatnoammableobjectshavebeenplacedonthesau-

na heater before the sauna control unit is switched on.

●Heat up the sauna heater for half an hour BEFORE using the

saunaforthersttime.DoNOTremaininthesaunacabinduring

this period. Then ventilate the sauna cabin well (see 5.2. Heating

for the rst time on page 21).

●Never touch the sauna heater while it is operating. The surfaces

of the sauna heater and sauna stones become extremely hot.

●For your own safety, consult your supplier in the event of problems

thatarenotdescribedinsucientdetailintheuserinstructions.

EN

Instructions for installation and use p. 9/26

3. Product description

3.1. Scope of delivery

●Sauna heater

●Instructions for installation and use

3.2. Accessories

Accessories Item number

Set of brackets for the Concept R mini

heater railing

CP-RM-HSR-4S / 1-049-506

Wood railing for Concept R mini, lime wood CP-RM-L-4S / 1-049-706

Wood railing for Concept R mini, walnut CP-RM-N-4S / 1-049-707

Foot for Concept R mini heater CP-RM-SF / 1-043-964

Foot cover for Concept R mini, lime wood CP-RM-CSF-L / 1-041-482

Foot cover for Concept R mini, walnut CP-RM-CSF-N / 1-041-483

3.3. Product functions

The Concept R mini sauna heater is a Finnish sauna heater and makes it possible

to produce a typical Finnish sauna climate of 80 to 100 °C with an air humidity

of approximately 10%.

Installation instructions, only for experts p. 10/26

4. Installation and connection

Take the following points into account when positioning and connecting the

sauna heater:

●Theelectricalconnectionmayonlybeperformedbyaqualiedelectricianor

similarlyqualiedperson.

●A fully disconnecting all-pole isolating device compliant with overvoltage

categoryIIImustbettedonsite.

●The Concept R mini sauna heater is a wall-mounted heater. Before starting

theheater,checkthattheheaterhasbeenrmlyinstalledonthemountingrail.

4.1. Installation location and sensor position

Position the heater centrally in front of the air intake opening on the cabin wall.

ObservethesafetydistancestothecabinwallspeciedinFig. 1.

Install the temperature sensor with excess temperature cut-out to the cabin wall

above the centre of the sauna heater. Maintain a distance of 15 cm to the sauna

cabin roof.

WARNING!

Danger of electric shock

●The sauna heater may only be installed and connected when the

power supply is disconnected.

min 50

450

min 130 min 900

687

50 220

100

20

EN

Installation instructions, only for experts p. 11/26

Fig. 1 Safety distances for the

Concept R combi 3.5 kW, 4.5 kW, 6.0 kW and 7.5 kW

(CP-RM-35 / CP-RM-45 / CR-RM-60 / CP-RM-75)

Dimensions in mm

4.2. Safety distances

ObservetheminimumsafetydistancesspeciedinFig. 1.

Installation instructions, only for experts p. 12/26

4.3. Installation on the cabin wall

Observe Fig. 1, Fig. 2, Fig. 3 and Fig. 4 (page 11, 12, 13).

1. Attach the mounting rail 1 to the wall horizontally using the wood screws

supplied 2. Observe the minimum distances for the heater shown in Fig. 4.

2. Suspend the heater 3 from the mounting rail from above, moving it down-

wards.Makesurethattheheaterisushwiththewall.

3. Secure the heater 3 using the lock screws supplied 4 on the mounting rail 1.

Fig. 2 Position of the mounting rail for Concept R mini

Dimensions in mm

2

WARNING!

Risk of re

●Toxtheheaterinplaceandsecureitagainstslippage,usethe

supplied lock screw 4 for attachment.

1

210210

440

420

EN

Installation instructions, only for experts p. 13/26

63

5

Fig. 3 Position of the mounting rail for Concept R mini

Dimensions in mm

Fig. 4 Securing the Concept R mini (wooden railing)

1

3

4

1

63

5 5

Installation instructions, only for experts p. 14/26

4.4. Installation with foot (optional)

Observe Fig. 1, Fig. 5, Fig. 6 (page 11, 14, 15).

1. Attach the foot 1 using the screws enclosed 2 to the bottom of the heater.

Please note that the round recess is on the evaporator side.

2. Axthefootusingthescrewsenclosedtotheoor(Fig. 6). Depending

ontheoorconditions,usetheenclosedwoodscrewsoranchorswith

the corresponding screws. Observe the minimum distances for the heater

shown in Fig. 1.

WARNING!

Risk of re

●Axtheheaterwiththefootonasucientlysolidsubstrate,e.g.

on the substrate onto which the sauna cabin is built – NOT on the

oorcoveringofthesauna.

Fig. 5 Installing the foot on the Concept R mini

2

1

EN

Installation instructions, only for experts p. 15/26

Fig. 6 Fixing the Concept R mini with foot in place

Fig. 7 Installing the wooden cover for the foot (optional)

Place the two halves of the cover ring around the foot and press them together

rmlytocoverthescrewsofthefoot.

L1 L2 N

L3 U

V

N

Wr

r

w

ϑϑ

U

V

NW

W

400V 3N~

NVNU

PE

N

V1

Wm

N

U1

WM

L2

L1

L3

Installation instructions, only for experts p. 16/26

4.5. Connection diagram for 400 V 3N~

Fig. 8

2

3

4

1

Connection diagram for the Concept R mini

3.5 kW, 4.5 kW, 6.0 kW and 7.5 kW

(CP-RM-35 / CP-RM-45 / CR-RM-60 / CP-RM-75)

L1 L2 N

L3 U

V

N

Wr

r

w

ϑϑ

U

V

NW

W

230V 3~

NVNU

PE

L2

L1

L3

4.6. Connection diagram for 230 V 3~

Fig. 9 Connection diagram for the Concept R mini

3.5 kW, 4.5 kW and 6.0 kW

(CP-RM-35 / CP-RM-45 / CR-RM-60)

1

4

3

2

*

EN

Installation instructions, only for experts p. 17/26

1 Sauna control unit

2 Temperature sensor with excess temperature cut-out

3 Sauna heater

4 Power supply

Remove the copper bridge

*

4.7. Connection diagram for 230 V 1N~

Fig. 10 Connection diagram for the Concept R mini

3.5 kW, 4.5 kW, 6.0 kW and 7.5 kW

(CP-RM-35 / CP-RM-45 / CR-RM-60 / CP-RM-75)

L1 L2 N

L3 U

V

N

Wr

r

w

ϑϑ

U

V

NW

W

230V 1N~

NVNU

L

PE

N

2

1

4

3

*

Installation instructions, only for experts p. 18/26

CP-RM-75

7.5 kW

CP-RM-35

3.45 kW

U V W N

1,15kW

CP-RM-60

6.0 kW

4.8. Wiring diagrams

CP-RM-45

4.5 kW

U V W N

1,5kW

U V W N

2,0kW

to the control unitto the control unit

to the control unit

U V W N

2,5kW

to the control unit

U

V

W

N

PE

EN

Installation instructions, only for experts p. 19/26

Connecting the Concept R 3.5 kW, 4.5 kW, 6.0 kW and 7.5 kW

(CP-RM-35 / CP-RM-45 / CR-RM-60 / CP-RM-75)

1. Guide the connection cable through the feed-

through 4.

2. Connect the connectors of the connection

cable to the U – V – W – N – PE terminals

of the sauna heater and to the applicable

sauna control unit terminals. Observe the

installation instructions for the sauna control

unit when doing so.

3. Reattach the cover panel 1 to the heater.

4.9. Electrical connection

1. Unscrew the screws 2 and 3 with a screwdriver.

2. Remove the cover plate 1.

4

2

3

1

Instructions for use for the user p. 20/26

5. Commissioning

5.1. Filling the stone container

The amount of stones suited to your heater can be found in chapter 11. Tech-

nical data (see page 26).

1. Wash the stones thoroughly using water and a brush before use. Do not

use any cleaning additives.

2. Beforellingtheheaterwiththesaunastones,checkthemforforeignobjects

and remove any remaining packaging.

3. Place the stones in the stone container. Stack the sauna stones loosely so

thataircanowthroughthegaps.

4. Make sure that the sauna stones do not protrude beyond the edge of the

stone container.

WARNING!

Risk of re due to overheating

If the sauna heater is used without sauna stones, the cabin walls will

becomeextremelyhot.Thiscouldcauseres.

●NEVER operate the sauna heater without the sauna stones.

Sidan laddas...

Sentiotec CP-RM-35 Concept R Mini Sauna Heater Användarmanual

Sentiotec CP-RM-35 Concept R Mini Sauna Heater Användarmanual

på andra språk

Relaterade papper

Andra dokument