Panasonic EY75A1 Operating Instructions Manual

Cordless Impact Driver/Cordles Impact Wrench

Akku-Schlagschrauber/Akku-Schlagschrauber

Perceuse à impact sans ﬁ l/Perceuse à impact sans ﬁ l

Avvitatore ad impulsi senza ﬁ li/Avvitatore ad impulsi senza ﬁ li

Snoerloze slagschroevendraaier/Snoerloze slagschroevendraaier

Destornillador de impacto inalámbrico/Destornillador de impacto inalámbrico

Akku-slagboremaskine/Akku-slagboremaskine

Sladdlös slagskruvdragare/Sladdlös slagskruvdragare

Trådløs slagbormaskin/Trådløs slagbormaskin

Langaton iskuruuviavain/Langaton iskuruuviavain

Model No: EY75A1/EY75A2

Operating Instructions

Bedienungsanleitung

Instructions d’utilisation

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Brugsvejledning

Driftsföreskrifter

Bruksanvisning

Käyttöohjeet

Before operating this unit, please read these instructions completely and save this manual for future use.

Vor Inbetriebnahme des Gerätes die Betriebsanleitung bitte gründlich durchlesen und diese Broschüre zum späteren Nachschlagen sorgfältig aufbewahren.

Lire entièrement les instructions suivantes avant de faire fonctionner l’appareil et conserver ce mode d’emploi à des fins de consultation ultérieure.

Prima di usare questa unità, leggere completamente queste istruzioni e conservare il manuale per usi futuri.

Lees deze gebruiksaanwijzing aandachtig door voor u het apparaat in gebruik neemt en bewaar de gebruiksaanwijzing voor eventuele naslag.

Antes de usar este aparato por primera vez, lea todas las instrucciones de este manual y guarde el manual para poderlo consultar en el futuro.

Gennemlæs denne betjeningsvejledning før brugen og gem den til fremtidig brug.

Läs igenom hela bruksanvisningen innan produkten tas i bruk. Spara bruksanvisningen för senare användning.

Før enheten tas i bruk, vennligst les disse alle anvisningene og oppbevar bruksanvisningen for senere bruk.

Lue ohjeet huolella ennen laitteen käyttöönottoa ja säilytä tämä käyttöohje tallessa tulevaa tarvetta varten.

-

2

-

FUNCTIONAL DESCRIPTION

FUNKTIONSBESCHREIBUNG

DESCRIPTION DES FONCTIONS

DESCRIZIONE DELLE FUNZIONI

FUNCTIEBESCHRIJVING

DESCRIPCIÓN FUNCIONAL

FUNKTIONSBESKRIVELSE

FUNKTIONSBESKRIVNING

FUNKSJONSBESKRIVELSE

TOIMINTOJEN KUVAUS

9ņV

Index/Index/Index/Indice/Index/Indice/Indeks/Index/Indeks/Hakemisto/

Индекс/Індекс

English: Page 5

Deutsch: Seite 19

Français: Page 32

Italiano: Pagina 45

Nederlands: Bladzijde 58

Español: Página 71

Dansk: Side 84

Svenska: Sid 97

Norsk: Side 110

Suomi: Sivu 123

(Q)

(F)

(O)

(N)(M)

(A)

(B)

(C)

(D)

(E)

(G)

(K)

(P)

(I)

(J)

(L)

(R)

(A)′

(H)

-

3

-

(A)

6.35 mm hex quick connect chuck

6,35 mm Sechskant-Schnellaufspannfutter

Mandrin de connexion rapide hexagonal de 6,35 mm

Mandrino esagonale di collegamento rapido da 6,35 mm

6,35 mm zeskantboorkop met snelkoppeling

Mandril hexagonal de conexión rápida de 6,35 mm

6,35 mm hexagonal borepatron til hurtig tilslutning

Snabbchuck med 6,35 mm sexkantshylsa

6,35 mm hex hurtigtilkoplingschuck

6,35 mm kuusiopikaistukka

(A)’

Square drive (ball detent)

Vierkant-Werkzeugaufnahme (Kugelraste)

Mandrin

Mandrino

Boorkop

Portabroca

Borepatron

Fyrkantig drivbult (med kulspärr)

Chuck

Kiinnityslaite

(B)

Nose protector

Frontabdeckung

Protection du bec

Protezione frontale

Neusbeschermer

Protector del morro

Næsebeskytter

Nosskydd

Nesebeskytter

Kärjen suojus

(C)

Forward/Reverse lever

Vorwärts-/Rückwärtshebel

Levier d’inversion marche avant/marche arrière

Leva di avanzamento/inversione

Links/rechtsschakelaar

Palanca de avance/marcha atrás

Greb til forlæns/baglæns retning

Riktningsomkopplare

Forover-/bakoverbryter

Eteenpäin/taaksepäin vipu

(D)

Belt hook lock lever

Riemenhaken-Verriegelungshebel

Levier de verrouillage du crochet de ceinture

Leva di blocco gancio da cintura

Borghendel voor riemclip

Palanca de bloqueo del gancho de cinturón

Låsehåndtag til bæltekrog

Låsknapp för bälteskrok

Låsespak for beltekrok

Vyölenkin lukitusvipu

(E)

Belt hook

Riemenhaken

Crochet de ceinture

Gancio da cintura

Riemclip

Gancho del cinturón

Bæltekrog

Bälteskrok

Beltekrok

Vyölenkki

(F)

Alignment marks

Ausrichtmarkierungen

Marques d’alignement

Marcature allineamento

Uitlijntekens

Marcas de alineación

Flugtemærker

Anpassningsmärken

Opprettingsmerke

Sovitusmerkit

(G)

Battery pack release button

Akku-Entriegelungsknopf

Bouton de libération de batterie autonome

Tasto di rilascio pacco batteria

Accu-ontgrendeltoets

Botón de liberación de batería

Udløserknap til batteripakning

Frigöringsknapp för batteri

Utløserknapp for batteripakke

Akkupaketin irrotuspainike

(H)

Battery pack

Akku

Batterie autonome

Pacco batteria

Accu

Batería

Batteripakning

Batteri

Batteripakke

Akku

(I)

LED light

LED-Leuchte

Lumière DEL

Luce LED

LED-lampje

Luz indicadora

LED-lys

LED-ljus

LED-lys

LED-valo

(J)

Control panel

Bedienfeld

Panneau de commande

Pannello di controllo

Bedieningspaneel

Panel de control

Kontrolpanel

Kontrollpanel

Säätöpaneeli

(K)

LED light ON/OFF button

LED-Leuchten-EIN/AUS-Taste

Bouton Marche/Arrêt de la lumière DEL

Tasto di accensione e spegnimento della luce LED

Aan/uit-toets (ON/OFF) voor LED-lampje

Botón ON/OFF de luz LED

TÆND/SLUK-knap til LED-lys

Strömbrytare för LED-ljus

PÅ/AV-knapp for LED-lys

LED-valon kytkin/katkaisupainike

-

4

-

(L)

Impact power mode button

Schlagkraftmodus-Wahltaste

Bouton du mode de puissance de percussion

Tasto modalità potenza impatto

Slagkrachtfunctietoets

Botón de modo de potencia de impacto

Slagkraftfunktionsknap

Slagkraftsväljare

Knapp for slagstyrketype

Iskutehomuodon painike

(M)

Impact power mode display

Schlagkraftmodusanzeige

Afﬁ chage du mode de puissance de percussion

Display modalità potenza impatto

Slagkrachtfunctiedisplay

Indicación de modo de potencia de impacto

Slagkraftfunktionsdisplay

Slagkraftsindikering

Fremviser av slagstyrketype

Iskutehomuodon merkkivalo

(N)

Battery low warning lamp

Akkuladungs-Warnlampe

Témoin d’avertissement de batterie basse

Spia avvertenza batteria scarica

Waarschuwingslampje voor lage accuspanning

Luz de aviso de baja carga de batería

Advarselslampes batterieffekt lav

Varningslampa för svagt batteri

Varsellampe for at batteriet er for lavt

Alhaisen akkujännitteen varoituslamppu

(O)

Overheat warning lamp (motor/battery)

Überhitzungs-Warnlampe (Motor/Akku)

Témoin d’avertissement de surchauffe (moteur/batterie)

Spia avvertenza surriscaldamento (motore/batteria)

Oververhitting-waarschuwingslampje (motor/accu)

Luz de advertencia de sobrecalentamiento (motor/batería)

Advarselslamp til overophedning (motor/batteri)

Varningslampa för överhettning (motor/batteri)

Varsellampe for overoppheting (motor/batteri)

Ylikuumenemisen varoituslamppu (moottori/akku)

(P)

Variable speed control trigger

Variabler Geschwindigkeitskontrollschalter

Gâchette de commande de vitesse

Grilletto di controllo velocità variabile

Startschakelaar met variabele toerentalregeling

Disparador del control de velocidad variable

Kontroludløser for variabel hastighed

Avtryckare med variabel varvtalsreglering

Trinnløs hovedbryter

Nopeudensäätökytkin

(Q)

Battery charger

Ladegerät

Chargeur de batterie

Caricabatterie

Acculader

Cargador de batería

Batterioplader

Batteriladdare

Batterilader

Akkulaturi

(R)

Pack cover

Akkuabdeckung

Couvercle de la batterie autonome

Coperchio pacco

Accudeksel

Cubierta de batería

Pakningsdæksel

Batteriskydd

Pakkedeksel

Akkukotelon kansi

-

5

-

I.

ADDITIONAL

SAFETY RULES

1

) Wear ear protectors when using the

tool for extended periods.

2) Be aware that this tool is always in an

operating condition, since it does not have

to be plugged into an electrical outlet.

3) When screwing or driving into walls, floors,

etc., “live” electrical wires may be encoun-

tered. DO NOT TOUCH THE HEX QUICK

CHUCK OR ANY FRONT METAL PARTS

OF THE TOOL! Hold the tool only by the

plastic handle to prevent electric shock in

case you screw or drive into a “live” wire.

4) Do NOT operate the Forward/Reverse

lever when the main switch is on. The bat-

tery will discharge rapidly and damage to

the unit may occur.

5) During charging, the charger may become

slightly warm. This is normal.

Do NOT charge the battery for a long peri-

od.

6) When storing or carrying the tool, set the

Forward/Reverse lever to the center posi-

tion (switch lock).

7) Do not strain the tool by holding the speed

control trigger halfway (speed control

mode) so that the motor stops.

Symbol Meaning

V

Volts

Direct current

n

0

No load speed

… min

-1

Revolutions or reciprocations

per minutes

Ah

Electrical capacity of battery

pack

Read the operating

instructions before use.

For indoor use only.

WARNING:

• Do not use other than the Panasonic

battery packs that are designed for use

with this rechargeable tool.

• Panasonic is not responsible for any

damage or accident caused by the use of

recycled or counterfeit battery pack.

• Do not dispose of the battery pack in a

fire, or expose it to excessive heat.

•

Do not drive the likes of nails into the battery

pack, subject it to shocks, dismantle it, or

attempt to modify it.

• Do not allow metal objects to touch the

battery pack terminals.

• Do not carry or store the battery pack

in the same container as nails or similar

metal objects.

• Do not charge the battery pack in a

high-temperature location, such as next

to a fire or in direct sunlight. Otherwise,

the battery may overheat, catch fire, or

explode.

• Never use other than the dedicated

charger to charge the battery pack.

Otherwise, the battery may leak, overheat,

or explode.

Original instructions: English

Translation of the original instructions:

Other languages

Read “the Safety Instructions” booklet

and the following before using.

-

6

-

• After removing the battery pack from

the tool or the charger, always reattach

the pack cover. Otherwise, the battery

contacts could be shorted, leading to a

risk of fire.

• When the Battery Pack Has Deteriorated,

Replace It with a New One. Continued

use of a damaged battery pack may result

in heat generation, ignition or battery

rupture.

II. ASSEMBLY

Attaching or Removing Bit

NOTE:

•

When attaching or removing a bit, discon-

nect battery pack from tool or place the

switch in the center position (switch lock).

1. Hold the collar of quick connect chuck and

pull it out from the driver.

2. Insert the bit into the chuck. Release the

collar.

3. The collar will return to its original position

when it is released.

4.

Pull the bit to make sure it does not come out.

5. To remove the bit, pull out the collar in the

same way.

CAUTION:

• If the collar does not return to its origi-

nal position or the bit comes out when

pulled on, the bit has not been properly

attached. Make sure the bit is properly

attached before use.

Use 6.35 mm hexagonal bits.

To ensure proper securement of the bit, use

only hexagonal bits with 9.5 mm detent.

6.35 mm

9.5 mm

Attaching or Removing

Sock et

1. Attaching Socket

Attach the socket by sliding the female

detent on the bottom of the socket to the

square drive on the body.

Make sure the

socket is firmly

connected to

the body.

2. Removing Socket

Pull out the socket.

NOTE:

Attaching or Removing Original Options

and Sockets

Keep the body above freezing point

(0°C 32°F) when attach or detach

original options and sockets to the

square drive on the body. The cushion

rubber in the square drive to push up

the ball may get hard under freezing

point. This requires extra force in

detaching and attaching sockets.

Attaching or Removing Bat-

tery Pack

1. To connect the battery pack:

Align the highlighted marker points and

attach battery pack.

• Slide the battery pack until it locks into

position.

Alignment

marks

2. To remove the battery pack:

Push the button and slide the battery pack

forward.

Button

-

7

-

III. OPERATION

WARNING!

• Do not inhale any smoke emitted from the

tool or battery pack as it may be harmful.

[Main Body]

Switch and Forward/Reverse

Lever Operation

Forward Reverse

Switch lock

CAUTION:

To prevent damage, do not operate

Forward/Reverse lever until the bit

comes to a complete stop.

Forward Rotation Switch

Operation

1. Push the lever for forward rotation.

2. Depress the trigger switch slightly to start

the tool slowly.

3. The speed increases with the amount of

depression of the trigger for efficient tight-

ening of screws. The brake operates and

the bit stops immediately when the trigger

is released.

4. After use, set the lever to its center posi-

tion (switch lock).

Reverse Rotation Switch

Operation

1.

Push the lever for reverse rotation. Check

the

direction of rotation before use.

2.

Depress the trigger switch slightly to start the

tool slowly.

3. After use, set the lever to its center posi-

tion (switch lock).

CAUTION:

•

To eliminate excessive temperature

increase of the tool surface, do not oper-

ate the tool continuously using two or

more battery packs. Tool needs cool off

time before switching to another pack.

How to Use the Belt Hook

WARNING!

• Be sure to attach the belt hook securely

to the main unit with the screw firmly fas-

tened. When the belt hook is not firmly

attached to the main unit, the hook may

disconnect and the main unit may fall.

This may result in an accident or injury.

• Periodically check screw for tightness. If

found to be loose, tighten firmly.

•

Be sure to attach the belt hook firmly and

securely onto a waist belt or other belt. Pay

attention that the unit does not slip off the

belt.

This may result in an accident or injury.

• When the main unit is held by the belt

hook, avoid jumping or running with it.

Doing so may cause the hook to slip and

the main unit may fall.

This may result in an accident or injury.

• When the belt hook is not used, be sure

to return it to the storing position. The belt

hook may catch on something.

This may result in an accident or injury.

•

When the unit is hooked onto the waist belt

by the belt hook, do not attach driver bits

to the unit. A sharp edge object, such as a

drill bit, may cause injury or an accident.

To Change the Belt Hook

Location Side

The belt hook can be attached to either

side of the unit.

1. Removing the hook

(1) Remove the nut.

(2) Draw out the hook.

2. Attaching the hook to the other side

(1) Insert the hook in the other side.

(2) Tighten the nut fully so that it

securely fastened.

-

8

-

Variable Speed Control Trigger

To set the center of a hole, pull the trigger

slightly to start the bit rotation slowly.

The more the speed control trigger is

pulled, the higher the speed becomes.

CAUTION:

When operating the tool by pulling the

trigger, there may be a momentary lag

before rotation starts. This does not signal

a malfunction.

• This lag occurs as the tool’s circuitry

starts up when the trigger is pulled for

the first time after installing a new bat-

tery pack or after the tool has not been

used for at least 1 minute (or at least 5

minutes when the LED is on). Rotation

will start without any lag during second

and subsequent operations.

Control Panel

(1)

(4) (3)

(2)

(1) Impact Power Mode Select

Selecting the impact power among 3

modes (Soft, Medium, Hard).

Press the impact power mode button to set

it. The mode changes to hard, medium, or

soft each time the button is pressed.

The driver is preset to “hard” impact mode

setting when shipped from the manufac-

turer.

Recommended work guideline table

Impact

Power mode

Display

Recommended Application

H

Jobs requiring a high level

of torque where there is

no possibility of the bolts

or screw breaking, its top

shearing off, or the bit coming

loose. (This setting provides

maximum torque.) Suitable

applications include:

Tightening M8 and larger

bolts

Tightening long screws

during interior finishing work

0 – 2300 r.p.m./

0 – 2500 r.p.m.

and

0 – 3000 i.p.m./

0 – 3500 i.p.m.

M

Jobs requiring limited torque

where there is a possibility of

the screw breaking or its top

shearing off. (This setting limits

torque.) Suitable applications

include:

Tightening bolts with

smaller diameters (M6)

Tightening metalwork

screws when installing

fixtures

0 – 1400 r.p.m.

and

0 – 2800 i.p.m.

S

Jobs requiring limited torque

where there is a possibility

of the screw breaking, its

top shearing off, or the bit

coming loose and damaging

a ﬁ nished exterior surface.

(This setting limits torque.)

Suitable applications include:

Tightening bolts smaller

than M6 that may shear

easily

Tightening screws into

molded plastic

Installing gypsum wallboard

0 – 1000 r.p.m.

and

0 – 2000 i.p.m.

* i.p.m. = Impact per minute.

Avoid repeatedly depressing the switch

when the bolts and screws are securely

fastened.

Not doing so may cause a delay in

rotation starting, or the Impact Power

mode display to flash and prevent rotation

from starting for circuit protection.

(2) LED light

Pressing the but ton

tog gles the LED light on

and off.

The light illuminates

with very low cur-

rent, and it does not

adversely affect the per-

formance of the driver

during use or its battery

capacity.

CAUTION:

• The built-in LED light is designed to illu-

minate the small work area temporarily.

•

Do not use it as a substitute for a regu-

lar

flashlight, since it does not have

enough brightness

.

• L

ED light turns off when the tool has not

been used for 5 minutes.

Caution : DO NOT STARE INTO BEAM.

Use of controls or adjustments or performance

of procedures other than those speciﬁ ed herein

may result in hazardous radiation exposure.

-

9

-

(3) Overheat warning lamp

Off

(normal

operation)

Illuminated:

Overheat

(motor)

Flashing:

Overheat

(battery)

Indicates operation has

been halted due to motor

or battery overheating.

To protect the motor or battery, be sure to

note the following when carrying out this

operation.

• If the motor or battery becomes hot, the

protection function will be activated and

the motor or battery will stop operating.

The overheat warning lamp on the

control panel illuminates or ﬂashes

when this feature is active.

• If the overheating protection feature

activates, allow the tool to cool

thoroughly (at least 30 minutes). The

tool is ready for use when the overheat

warning lamp goes out.

• Avoid using the tool in a way that

causes the overheating protection

feature to activate repeatedly.

• If the tool is operated continuously

under high-load conditions or if it is

used in hot-temperature conditions

(such as during summer), the

overheating protection feature may

activate frequently.

• If the tool is used in cold-temperature

conditions (such as during winter) or if

it is frequently stopped during use, the

overheating protection feature may not

activate.

• The performance of the EY9L42

deteriorates significantly at and below

10°C due to work conditions and other

factors.

• The ambient temperature range is

between 0°C (32°F) and 40°C (104°F).

If the battery pack is used when the

battery temperature is below 0°C

(32°F), the tool may fail to function

properly.

• Use the charger at temperatures

between 0°C and 40°C, and charge the

battery at a temperature similar to that

of the battery itself. (There should be no

more than a 15°C difference between

the temperatures of the battery and the

charging location.)

(4) Battery low warning lamp

Off (normal

operation)

Flashing (No charge)

Battery protection

feature active

Excessive (complete) discharging of

lithium ion batteries shortens their service

life dramatically. The driver includes a

battery protection feature designed to

prevent excessive discharging of the

battery pack.

• The battery protection feature activates

immediately before the battery loses its

charge, causing the battery low warning

lamp to flash.

• If you notice the battery low warning

lamp flashing, charge the battery pack

immediately.

• If it is started with too little battery power

remaining, the tool may stop operating

without the battery low warning lamp

flashing first. This indicates that there is

too little battery power remaining to use

the tool, and the battery pack should be

charged before further use.

• If the tool is subject to a sudden load

during use that causes the motor to lock

up, the over current prevention sensor

may be triggered, and the impact power

select display may flash. The lamp will

stop flashing once you address the

cause of the motor’s locking up and

cycle the trigger.

Recommended Grip

Use the grip to hold and operate the

driver with one hand. If the job requires

additional force, you can push against

the rear end of the driver with your other

hand.

-

10

-

[Battery Pack]

For Appropriate Use of

Bat tery Pack

Li-ion Battery Pack

•

For optimum battery life, store the Li-ion bat-

tery pack following use without charging it.

• When charging the battery pack, confirm

that the terminals on the battery charger

are free of foreign substances such as

dust and water etc. Clean the terminals

before charging the battery pack if any

foreign substances are found on the

terminals.

The life of the battery pack terminals may

be affected by foreign substances such as

dust and water etc. during operation.

• When battery pack is not in use, keep

it away from other metal objects like:

paper clips, coins, keys, nails, screws, or

other small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together

may cause sparks, burns or a fire.

• When operating the battery pack, make

sure the work place is well ventilated.

• When the battery pack is removed from

the main body of the tool, replace the

battery pack cover immediately in order

to prevent dust or dirt from contaminating

the battery terminals and causing a short

circuit.

Battery Pack Life

The rechargeable batteries have a lim-

ited life. If the operation time becomes

extremely short after recharging, replace

the battery pack with a new one.

Battery Recycling

ATTENTION:

For environmental protection and recy-

cling of materials, be sure that it is dis-

posed of at an officially assigned loca-

tion, if there is one in your country.

Recommendations for use

Terminals

Pack cover

Label

Be sure to use the Pack cover

• When the battery pack is not being used,

store the battery in a way that foreign

substances such as dust and water etc.

do not contaminate the terminals. Be sure

to attach the battery pack cover to protect

the battery terminals.

• When charging the battery pack, confrm

that the terminals on the battery charger

are free of foreign substances such as

dust and water etc. Clean the terminals

before charging the battery pack if any

foreign substances are found on the

terminals.

The life of the battery pack terminals may

be affected by foreign substances such as

dust and water etc. during operation.

CAUTION:

To protect the motor or battery, be sure to

note the following when carrying out opera-

tion.

• If the motor and battery becomes hot, the

protection function will be activated and

the motor and battery will stop operating.

For safe use

• The battery pack is designed to be

installed by proceeding two steps for

safety. Make sure the battery pack is

installed properly to the main unit before

use.

• If the battery pack is not connected firmly

when the switch is switched on, the

overheat warning lamp and the battery

low warning lamp will flash to indicate that

safe operation is not possible, and the

main unit will not rotate normally. Connect

the battery pack into the unit of the tool

until the red or yellow label disappears.

-

11

-

How to charge

1. Plug the charger into the AC outlet.

NOTE:

Sparks may be produced when the plug

is inserted into the AC power supply,

but this is not a problem in terms of

safety.

2.

Connect the battery pack firmly into the charger.

1 Line up the alignment marks and place the

battery onto the dock on the charger.

2 Slide forward in the direction of the arrow.

Alignment marks

3.

During charging, the charging lamp will be lit.

When charging is completed, an internal

electronic switch will automatically be trig-

gered to prevent overcharging.

• Charging will not start if the battery

pack is warm (for example, immediately

after heavy-duty operation).

The orange standby lamp will be flash-

ing until the battery cools down.

Charging will then begin automatically.

4. The charge lamp (green) will flash slowly

once the battery is approximately 80%

charged.

5.

When charging is completed, the charging

lamp in green color will turn off.

6. If the temperature of the batter pack is

0°C or less, charging takes longer to fully

charge the battery pack than the standard

charging time.

Even when the battery is fully charged, it

will have approximately 50% of the power

of a fully charged battery at normal oper-

ating temperature.

7.

Consult an authorized dealer if the charging

lamp (green) does not turn off.

8. If a fully charged battery pack is inserted

into the charger again, the charging lamp

lights up. After several minutes, the charg-

ing lamp in green color will turn off.

9. Remove the battery pack while the battery

pack release button is held up.

Battery pack

release button

[Battery Charger]

Charging

CAUTION:

• The charger is designed to operate on

standard domestic electrical power only

as stated in the rating plate. Charge only

on the voltage indicated on the rating

plate of unit. e.g.230v / 50Hz.

• Do not attempt to use it on any other

voltage or frequency rating!

• If the temperature of the battery pack

falls approximately below −10°C (14°F),

charging will automatically stop to prevent

degradation of the battery.

• The ambient temperature range is

between 0°C (32°F) and 40°C (104°F).

If the battery pack is used when the battery

temperature is below 0°C (32°F), the tool

may fail to function properly.

• Use the charger at temperatures between

0°C and 40°C, and charge the battery at

a temperature similar to that of the battery

itself. (There should be no more than a

15°C difference between the temperatures

of the battery and the charging location.)

• When charging a cool battery pack (below

0°C (32°F)) in a warm place, leave the

battery pack at the place and wait for more

than one hour to warm up the battery to

the level of the ambient temperature.

• Cool down the charger when charging

more than two battery packs consecutively.

• Do not insert your fingers into contact

hole, when holding charger or any other

occasions.

CAUTION:

To prevent the risk of fire or damage to the

battery charger.

• Do not cover vent holes on the charger

and the battery pack.

• Unplug the charger when not in use.

NOTE:

Your battery pack is not fully charged at

the time of purchase. Be sure to charge

the battery before use.

-

12

-

LAMP INDICATIONS

Charging is completed. (Full charge.)

Battery is approximately 80% charged.

Now charging.

Charger is plugged into the AC outlet. Ready to charge.

(Green) (Orange)

Charging Status Lamp.

Left: green Right: orange will be displayed.

Battery pack is cool.

The battery pack is being charged slowly to reduce the load on the battery.

Battery pack is warm.

Charging will begin when temperature of battery pack drops. If the temperature of the

battery pack is -10° or less, the charging status lamp (orange) will also start flashing .

Charging will begin when the temperature of the battery pack goes up"

Charging is not possible. Clogged with dust or malfunction of the bat-

tery pack.

Turn off Illuminated Flashing

Information for Users on Collection and Disposal of Old Equip-

ment and used Batteries

These symbols on the products, packaging, and/or accompanying docu ments mean

that used electrical and electronic products and batteries should not be mixed with

general household waste.

For proper treatment, recovery and recycling of old products and used bat teries, please

take them to applicable collection points, in accordance with your national legislation

and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the

environment which could otherwise arise from inap propriate waste handling.

For more information about collection and recycling of old products and bat teries,

please contact your local municipality, your waste disposal service or the point of sale

where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in ac cordance with

national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

-

13

-

IV. MAINTENANCE

• Use only a dry, soft cloth for wiping the unit.

Do not use a damp cloth, thinner, benzine,

or other volatile solvents for cleaning.

• In the event that the inside of the tool or

battery pack is exposed to water, drain

and allow to dry as soon as possible.

Carefully remove any dust or iron filings

that collect inside the tool. If you experi-

ence any problems operating the tool,

consult with a repair shop.

V. TIGHTENING

TORQUE

The power required for tightening a bolt will

vary, according to bolt material and size, as

well as the material being bolted. Choose

the length of tightening time accordingly.

Reference values are provided below.

(They may vary according to tightening conditions.)

Factors Affecting Tighten-

ing Torque

The tightening torque is affected by a wide

variety of factors including the followings.

After tightening, always check the torque

with a torque wrench.

1) Voltage

When the battery pack becomes near-

ly discharged, the voltage decreases and

the tightening torque drops.

Bolt Tightening Conditions

EY75A1 14.4 V

M10 x 35 mm M12, M14, M16 x 45 mm

Standard bolt

N × m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

EY75A1 14.4 V

M8, M10 x 35 mm. M12 x 45 mm

High tensile bolt

N × m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

EY75A2 14.4 V

M10 x 35 mm M12, M14, M16 x 45 mm

Standard bolt

N s m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

-

14

-

EY75A2 18 V

M10 x 35 mm M12, M14, M16 x 45 mm

Standard bolt

N s m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

EY75A2 18 V

M8, M10 x 35 mm. M12 x 45 mm

High tensile bolt

N s m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

Bolt

Nut

Washer

Steel plate

thickness 10 mm

Washer

Spring washer

Tightening conditions

• The following bolts are used.

Standard bolts: Strength type 4.8

High tensile type 12.9

4.8

Explanation of the strength type

Bolt yield point

(

80% of tensile strength)

32 kgf/mm

2

(45000 psi)

Bolt tensile strength

40 kgf/mm

2

(56000 psi)

EY75A2 14.4 V

M8, M10 x 35 mm. M12 x 45 mm

High tensile bolt

N s m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

EY75A1 18 V

M10 x 35 mm M12, M14, M16 x 45 mm

Standard bolt

N × m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

EY75A1 18 V

M8, M10 x 35 mm. M12 x 45 mm

High tensile bolt

N × m

(kgf-cm)

Tightening torque

Tightening time (Sec.)

-

15

-

VI. ACCESSORIES

Use only suitable size of bit.

Panasonic original Optional Quick change chuck (EY9HX110E or EY9HX111E).

Chuck Size: 6.35 mm hex

EY9HX111EEY9HX110E

2) Tightening time

Longer tightening time results in increased

tightening torque. Excessive tightening,

how ever, adds no value and reduces the

life of the tool.

3) Different bolt diameters

The size of the bolt diameter affects the

tight ening torque.

Generally, as the bolt diameter increases,

tightening torque rises.

4) Tightening conditions

Tightening torque will vary, even with the

same bolt, according to grade, length, and

torque coefficient (the fixed coefficient indi-

cated by the manufacturer upon produc-

tion).

Tightening torque will vary, even with

the same bolting material (e.g. steel),

accord ing to the surface finish.

Torque is greatly reduced when the bolt

and nut start turning together.

5) Socket play

Torque is lowered as the six-sided

configu ration of the socket of the wrong

size is used to tighten a bolt.

6) Switch (Variable speed control trigger)

Torque is lowered if the unit is used with

the switch not fully depressed.

7) Effect of Connecting Adaptor

The tightening torque will be lowered

through the use of a universal joint or a

connecting adaptor.

-

16

-

VII. APPENDIX

MAXIMUM RECOMMENDED CAPACITIES

Model

EY75A1 EY75A2

Screw driving

Wood screw

3.5 mm - 9.5 mm

Self-drilling screw

3.5 mm - 6 mm

Bolt fastening

Standard bolt : M6 - M16

High tensile bolt

: M6 - M12

WARRANTY SUPPLEMENT

The breakdown and damage caused by usage consistent for a long time (e.g.: factory work on

the assembly line, etc.) is out of warranty.

VIII. SPECIFICATIONS

NOTE:

Weight indication

Greater than or equal to 1kg : indicated by 0.05kg.

Less than 1kg : indicated by 0.01kg.

MAIN UNIT

Model

EY75A1 EY75A2

Motor voltage 14.4 V DC 18 V DC 14.4 V DC 18 V DC

No load speed

soft mode 0 - 1000 min

-1

medium mode 0 - 1400 min

-1

hard mode 0 - 2500 min

-1

0 - 2300 min

-1

Maximum torque 150 N·m 155 N·m 200 N·m 205 N·m

Impact per minute

soft mode 0 - 2000 min

-1

medium mode 0 - 2800 min

-1

hard mode 0 - 3000 min

-1

0 - 3500 min

-1

Overall length 143 mm 155 mm

Weight

(with battery pack: EY9L44)

1.55 kg

-

1.55 kg

-

Weight

(with battery pack: EY9L45)

1.55 kg

-

1.55 kg

-

Weight

(with battery pack: EY9L50)

-

1.65 kg

-

1.65 kg

Weight

(with battery pack: EY9L51)

-

1.65 kg

-

1.65 kg

Noise,Vibration See the included sheet

-

17

-

BATTERY PACK

Model EY9L41 EY9L42 EY9L44 EY9L45 EY9L50 EY9L51

Storage battery Li-ion Battery

Battery voltage

14.4 V DC

(3.6 V x 4 cells)

14.4 V DC

(3.6 V x 8 cells)

18 V DC

(3.6 V x 10 cells)

BATTERY CHARGER

Model EY0L81

Electrical rating See the rating plate on the bottom of the charger

Weight

0.93 kg

Charging time

EY9L41 EY9L42 EY9L44 EY9L45 EY9L50 EY9L51

Usable:

45 min

Usable:

30 min

Usable:

50 min

Usable:

65 min

Usable:

50 min

Usable:

65 min

Full:

60 min

Full:

35 min

Full:

65 min

Full:

80 min

Full:

65 min

Full:

80 min

Model EY0L82

Electrical rating See the rating plate on the bottom of the charger

Weight

0.93 kg

Charging time

EY9L41 EY9L42 EY9L44 EY9L45 EY9L50 EY9L51

Usable:

35 min

Usable:

30 min

Usable:

40 min

Usable:

50 min

Usable:

40 min

Usable:

55 min

Full:

50 min

Full:

35 min

Full:

55 min

Full:

60 min

Full:

55 min

Full:

70 min

NOTE: This chart may include models that are not available in your area.

Please refer to the latest general catalogue.

NOTE: For the dealer name and address, please see the included warranty card.

-

18

-

IMPORTANT:

The wires in this mains lead are

coloured in accordance with the follow-

ing code:

Blue: Neutral

Brown: Live

As the colours of the wire in the mains lead

of this appliance may not correspond with

the coloured markings identifying the termi-

nals in your plug, proceed as follows.

The wire which is coloured BLUE must be

connected to the terminal in the plug which

is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be

connected to the terminal in the plug which is

marked with the letter L or coloured RED.

Under no circumstances should either of

these wires be connected to the earth ter-

minal of the three pin plug, marked with the

letter E or the Earth Symbol

.

How to replace the fuse: Open the fuse

compartment with a screwdriver and replace

the fuse and fuse cover if it is removable.

Fuse Cover

This apparatus was produced to BS800.

ONLY FOR U. K.

IX. ELECTRICAL

PLUG

INFORMATION

FOR YOUR SAFETY PLEASE READ

THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a moulded

three pin mains plug for your safety and

convenience.

A 5 amp fuse is ﬁ tted in this plug.

Should the fuse need to be replaced please

ensure that the replacement fuse has a rat-

ing of 5 amp and that it is approved by ASTA

or BSI to BS1362.

Check for the ASTA mark

or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover

you must ensure that it is reﬁ tted when the

fuse is replaced.

If you lose the fuse cover the plug must

not be used until a replacement cover is

obtained.

A replacement fuse cover can be purchased

from your local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UN-

SUITABLE FOR THE SOCKET OUTLET IN

YOUR HOME THEN THE FUSE SHOULD

BE REMOVED AND THE PLUG CUT OFF

AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE

ELECTRICAL SHOCK IF THE CUT OFF

PLUG IS INSERTED INTO ANY 13 AMP

SOCKET.

If a new plug is to be ﬁ tted please observe

the wiring code as shown below.

If in any doubt please consult a qualiﬁ ed

electrician.

-

19

-

I. WEITERE WICHTIGE

SICHERHEITSREGELN

1)

Geeigneten Gehörschutz tragen, wenn

das Werkzeug längere Zeit im Betrieb ist!

2)

Denken Sie daran, dass das Werk zeug

ständig betriebsbereit ist, da es nicht an die

Steckdose angeschlossen werden muss.

3) Beim Schrauben in Wände, Fußböden

usw. können stromführende Kabel

be rührt werden. DAHER NIE DAS VIER-

KANTSCHNELLSPANNFUTTER ODER

ANDERE VORDERE METALLTEILE

BERÜHREN! Das Werkzeug beim

Schrauben nur am Kunststoffgriff halten,

um in solchen Fällen vor elektrischen

Schlägen geschützt zu sein.

4)

Betätigen Sie den Rechts-/Linkslauf-

Umschalthebel NICHT, wenn der Haupts chalter

eingeschaltet ist. Der Akku entlädt sich sonst

schnell, und das Gerät kann beschädigt werden.

5) Beim Aufladen kann sich das Lade gerät

etwas erhitzen. Dies ist normal.

Den Akku daher NICHT über lange Zeit aufladen.

6)

Stellen Sie den Rechts-/Linkslauf- Umschalthe-

bel zum Lagern oder Tragen des Werkzeugs

auf die Mittenstellung (Schaltersperre).

7) Belasten Sie das Werkzeug nicht, indem

Sie den Elektronikschalter halb gedrückt

halten (Drehzahlregelmodus), sodass der

Motor stehen bleibt.

Symbol Bedeutung

V Volt

Gleichstrom

n

0

Leerlaufdrehzahl

… min

-1

Drehzahl oder Hubzahl pro

Minute

Ah

Akkukapazitat in Ampere

Stunden

Lesen Sie die

Bedienungsanleitung vor

Gebrauch.

Nur für Inneneinsatz.

WARNUNG:

•

Verwenden Sie nur die Panasonic-Akkus, die für den

Einsatz mit dieser Akku-Maschine ausgelegt sind.

• Panasonic übernimmt keine Verantwortung

für etwaige Schäden oder Unfälle, die

durch den Gebrauch von recycelten oder

gefälschten Akkus verursacht werden.

•

Werfen Sie den Akku nicht ins Feuer, und setzen

Sie ihn auch keiner übermäßigen Wärme aus.

• Unterlassen Sie das Einschlagen von Nägeln

in den Akku sowie Erschüttern, Zerlegen

oder Abändern des Akkus.

• Achten Sie darauf, dass keine

Metallgegenstände mit den Kontakten des

Akkus in Berührung kommen.

• Unterlassen Sie das Tragen oder

Aufbewahren des Akkus zusammen mit

Nägeln oder ähnlichen Metallgegenständen

im selben Behälter.

Original-Anleitung: Englisch

Übersetzung der Original-Anleitung:

Andere Sprachen

Lesen Sie bitte vor der ersten Inbetriebnah-

me dieses Gerätes das separate Handbuch

„Sicherheitsmaßregeln“ sorgfältig durch.

-

20

-

•

Laden Sie den Akku nicht an einem heißen Ort,

wie z. B. in der Nähe eines Feuers oder in direk-

tem Sonnenlicht. Anderenfalls kann der Akku

überhitzen, Feuer fangen oder explodieren.

•

Verwenden Sie nur das zugehörige Lade gerät

zum Laden des Akkus. Anderenfalls kann der

Akku auslaufen, überhitzen oder explodieren.

•

Nachdem Sie den Akku von der Maschine

oder dem Ladegerät abgenommen haben,

bringen Sie stets die Akkuabdeckung

wieder an. Anderenfalls könnten die

Akkukontakte kurzgeschlossen werden,

was zu einem Brand führen kann.

•

Wenn der Akku schwach geworden ist,

ersetzen Sie ihn durch einen neuen.

Fortgesetzter Gebrauch eines beschä-

digten Akkus kann zu Wärmeerzeugung,

Entzündung oder Bruch führen.

II. BAUGRUPPE

Anbringen oder Abnehmen

des Bits

HINWEIS:

• Trennen Sie vor dem Anbringen oder Abneh-

men eines Bits den Akku vom Werkzeug ab,

oder stellen Sie den Elektroniks chalter auf

die Mittel stellung (Schaltersperre).

1. Die Hülse des Schnellspannfutters halten

und vom Schrauber herausziehen.

2. Den Bit in das Bohrfutter einsetzen. Die

Hülse loslassen.

3. Der Ring springt in seine Ausgangs po sition

zurück, wenn er losgelassen wird.

4.

An dem Bit ziehen, um sicherzustellen, das er

nicht abgezogen werden kann.

5. Zum Entfernen des Bits die Hülse auf die

gleiche Weise herausziehen.

VORSICHT:

•

Wenn der Ring nicht in seine Ausgangs-

position zurückkehrt oder wenn sich der

Bit löst, wenn an ihm gezogen wird, wurde

der Bit nicht ordnungsgemäß eingesetzt.

Vor der Inbetriebnahme sicher stellen,

dass der Bit ordnungsgemäß befestigt ist.

Verwenden Sie 6,35-mm Sechskant bits.

Um einwandfreie Sicherung des Bits zu

gewährleisten, verwenden Sie nur Sechs-

kantbits mit 9,5 mm Arretierung.

6.35 mm

9.5 mm

Anbringen oder Abnehmen

einer Stecknuss

1. Anbringen einer Stecknuss

Bringen Sie die Stecknuss an, indem Sie die

Fassung an der Unterseite der Stecknuss

auf den Vierkant am Werkzeug schieben.

Vergewissern

Sie sich, dass

die Stecknuss

fest mit dem

Werkzeug ver-

bunden ist.

2. Abnehmen einer Stecknuss

Ziehen Sie die Stecknuss ab.

HINWEIS:

Anbringen oder Abnehmen von

Originalzubehör und Stecknüssen

Halten Sie das Werkzeug über dem

Gefrierpunkt (0°C), wenn Sie Originalzubehör

und Stecknüsse am Vierkant des Werkzeugs

anbringen oder davon abnehmen. Das Gummi-

kissen im Vierkant, das die Kugel hochdrückt,

kann unterhalb des Gefrierpunkts hart werden.

Dies erfordert zusätzliche Kraft beim Abnehmen

und Anbringen von Stecknüssen.

Anbringen oder Abnehmen

des Akkus

1. Zum Anschließen des Akkus:

Die Ausrichtmarkierungen aufeinander

ausrichten, und den Akku anbringen.

• Den Akku einschieben, bis er einrastet.

Ausrichtmarkierungen

2. Zum Entfernen des Akkus:

Den Knopf drücken und den Akku

einschieben.

Knopf

Sidan laddas ...

Panasonic EY75A1 Operating Instructions Manual

Denna manual är också lämplig för

Panasonic EY75A1 Operating Instructions Manual

på andra språk

Relaterade papper

Andra dokument