Silvercrest KH 2029 Operating Instructions Manual

varumärke: Silvercrest

Modell: KH 2029

Kategori: Bordsklockor

Typ: Operating Instructions Manual

KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH2029-07/08-V1

MULTI-BAND RADIO

Operating instructions

MAAILMANRADIO

Käyttöohje

KH 2029

MULTI-BAND RADIO

SATELLITRADIO

Bruksanvisning

CV_KH2029_AR23586_LB3A 18.08.2008 16:12 Uhr Seite 1

KH 2029

;

CV_KH2029_AR23586_LB3A 18.08.2008 16:12 Uhr Seite 4

- 1 -

CONTENT PAGE

Intended use 2

Technical Data 2

Safety information 3

Operating elements 4

Starting up 5

Unpack the device ...........................................................................................................................5

Check package contents .................................................................................................................5

Mains and battery operation..........................................................................................................5

General functions 6

Key lock.............................................................................................................................................6

Screen lighting..................................................................................................................................6

Stand..................................................................................................................................................6

Time functions 6

Time, date, time zone and world time............................................................................................6

Select display mode.........................................................................................................................8

Alarm function...................................................................................................................................9

Stop watch function .......................................................................................................................10

Countdown function.......................................................................................................................10

Radio operation 11

Setting the station...........................................................................................................................11

Fine tuning.......................................................................................................................................12

Aerial...............................................................................................................................................12

Memory functions ..........................................................................................................................12

Cleaning 13

Cleaning the housing.....................................................................................................................13

Disposal 13

Warranty & service 14

Importer 14

Read the operating instructions carefully before using the appliance for the first time and preserve this

booklet for later reference. Pass the manual on to whomsoever might acquire the appliance at a later date.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 1

- 2 -

MULTI-BAND RADIO

KH 2029

Intended use

This device is designed to receive generally

approved radio transmissions in all countries

(world receiver) and only for domestic use.

It has not been designed to receive transmissions

that are not generally approved, nor as part of

safety radio systems, e. g. on board sports boats,

nor for industrial or commercial use. It has also not

been designed for use in temperatures beyond

those stated in the Technical Data.

Technical Data

This device has been tested and approved for

adherence to the basic requirements and the

other relevant regulations of the EMC Directive

2004/108/EC.

Power consumption: 5 W

Power consumption

Standby: 1.3 W

Operating

temperature: + 5

+ 35° C

Humidity: 5

90 %

(no condensation)

Dimensions

(L x W x H): 180 x 40 x110 mm

Weight: Approx. 380 g

Batteries

4 x 1.5 V, Type AA/LR6/Mignon

(not supplied)

Frequency range radio

VHF (FM) 87–109 MHz

SW 5.85–17.90 MHz

MW (AM) Europe 522–1656 kHz

MW (AM) USA 520–1710 kHz

LW 144–299 kHz

The technical features of the device enable the

frequency ranges stated above to be set.

Various countries may have different national

rules on the radio frequency ranges assigned.

Please note that you may not sell, transfer to third

parties or abuse information received outside the

assigned radio frequency ranges.

Tuning ranges

FM (VHF) 100 kHz/50 kHz

SW 5 kHz/1 kHz

MW (AM) Europe 9 kHz/1 kHz

MW (AM) USA 10 kHz/1 kHz

LW 1 kHz

Sensitivity: SW can be set to 2 intervals

General

Memory spaces: 400 stations

Headphone

output: 3.5 mm stereo socket

Headphone output

Maximum

output voltage: 30-60 mV

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 2

- 3 -

Safety information

• This device has not been designed for use

by people (including children) with restricted

physical, sensory or intellectual abilities or lack

of experience and/or knowledge, unless they

are supervised by a responsible person (for

their own safety) or have received instructions

on how to use the device.

• Children should be supervised to ensure that

they do not play with the device.

• In order to avoid the device being switched

on unintentionally, remove the adapter from the

mains socket after each use and before clea-

ning.

• Check the device and all parts for visible da-

mage. The device’s safety concept can only

work if the device is in perfect condition.

• The mains adapter must always be freely

accessible so that the device can be separated

from the power supply quickly in an emergency.

Risk of electric shock!

• Only connect the device to a properly installed

and earthed mains socket. The mains voltage

must agree with that stated on the mains

adapter specification plate.

• Damaged adapters or mains cables should

be exchanged immediately by an authorised

technician or the Customer Service in order to

avoid risks.

• Connection cables or devices that do not

work perfectly or have been damaged should

be repaired or exchanged immediately by Cu-

stomer Services.

Never immerse the device in water!

Simply wipe it with a slightly damp cloth.

• Do not expose the device to rain or use it in

a damp or wet environment.

• Ensure that the connection cable is never wet

or damp when in use.

• You must not open or repair the device’s hous-

ing. This can be dangerous and renders the

warranty null and void.

• Protect the device from moisture and sprayed

water. Therefore do not place any objects filled

with water (e. g. vases) on or near the device.

Risk of fire!

• Do not use the device near hot surfaces.

• Do not set the device up where it is exposed

to direct sunlight. This could cause it to over-

heat and damage it beyond repair.

• Never leave the device unattended during

operation.

• Never cover the device’s ventilation slots

when it is switched on.

• Do not place open flames, such as candles,

on or near the device.

Risk of injury!

• Keep children away from the connection cable

and device. Children frequently underestimate

the danger of electrical devices.

• If the device has fallen down or is damaged it

must no longer be used. Have the device

checked by a qualified specialist and, if neces-

sary, repaired.

• Batteries must not be handled by children.

Children can put batteries in their mouths

and swallow them.

If a battery has been swallowed, obtain

medical assistance immediately.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 3

- 4 -

Thunder storms!

Devices connected to mains power can be damaged

during a thunder storm. If there is a thunder storm,

always remove the mains plug from the socket.

Information on voltage surges

(EFT/electrical fast transient)

and electrostatic discharges:

If the product does not work properly due to elec-

trical fast transient processes (voltage surges) or

electrostatic discharge, it must be reset to restore

normal operation. If necessary, remove the plug

from the power socket and insert it again. The

batteries (if used) must be removed and reinserted.

Information on separating the

device from mains power

The POWER button on this device does not completely

separate it from the mains network. In addition, the

device uses power when in standby mode. In order

to completely separate the device from the mains

supply the plug must be removed from the mains

socket.

Notes on handling batteries

The device uses batteries. Please note the following

on handling batteries:

Risk of explosion!

Do not throw batteries into a fire.

Do not recharge batteries.

• Never open, solder or weld batteries.

There is a risk of explosion and injury!

• Check batteries regularly. Leaking batteries

can damage the device.

• If the appliance is not going to be used for

long periods, remove the batteries.

• If batteries leak, put on protective gloves.

• Clean the battery compartment and contacts

with a dry cloth.

Caution!

No liability/warranty applies to damage to the

device caused by moisture due to water penetrating

the device or overheating!

Operating elements

 Front side

Memory buttons M.0/5–M.4/9

Screen

Button SNOOZE

Frequency selection switch

Button PAGE

Button FINE

Button POWER

Buttons UP/DOWN

Buttons VOL.+ (AL–1)/VOL.– (AL–2)

Button MODE

Button BASS

Button MEMORY SCAN

Button MEM

Speakers

 Back

Stand

Aerial

Carrying strap

Switch SW SEN.

Headphone output

DC INPUT 7.5 V: Adapter slot

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 4

- 5 -

Starting up

Unpack the device

Remove all packaging materials.

Caution!

Do not let children play with the plastic film.

There is a risk of suffocation.

Check package contents

When unpacking, ensure that the following parts

are included:

• world receiver

• these operating instructions with warranty card

Mains and battery operation

When you disconnect the radio from the mains

supply, any settings you may have made (time,

alarm, stations in memory) will be lost. If you wish

to keep these settings, insert batteries (see below)

before disconnecting.

Inserting batteries

Instead of using the mains adapter, you can run the

radio from batteries (not supplied). You will need

four 1.5 V mignon batteries, size AA, LR6.

• Open the battery compartment on the rear of

the device by sliding the cover downwards.

• Insert four batteries into the compartment,

paying attention to the polarity.

• Replace the cover on the battery compartment.

If the batteries are too weak, this is indicated on the

screen by a flashing symbol .

Mains connection

• Connect the plug of the mains adapter

to the

DC INPUT 7.5 V socket on the side of the

device.

• Plug the mains adapter into an easily accessi-

ble socket. To avoid tripping hazards, please

avoid using an extension cable.

Caution!

Only use an adapter with an output voltage of

7.5 V / 400 mA and check the polarity of the

device’s plug ( ). The use of adap-

ters with a different output voltage may result in

damage to the device or mains adapter.

Automatic time update

• As soon as the mains adapter is connected or

batteries inserted, the world receiver starts in

time mode. The screen repeatedly shows

PLEASE WAIT SYSTEM SETTING.

If an RDS signal is received, the time and date

are set automatically. The correct time will then

be shown on the screen.

If the time is not correct, set the date and time

manually as shown below.

Connecting headphones

On the left side of the radio, you will find the

headphone socket.

• Insert the headphone jack plug into the

headphone output.

The speaker will be deactivated automatically.

Caution!

Listening to music with headphones

over long periods of time and at a high

volume may damage your hearing!

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 5

- 6 -

General functions

Key lock

In order to prevent changing the settings unintention-

ally by touching the buttons, you can activate the

key lock.

• Press and hold down the

MEM button for around

3 seconds. The screen will flash . All but-

tons except the

SNOOZE button are now locked.

• Press and hold down the

MEM button again for

about 3 seconds to cancel the key lock. The

message on the screen disappears.

Screen lighting

• Press any button to illuminate the screen.

The screen will remain lit for about10 seconds.

Stand

• Flip out the stand on the rear of the device

to enable it to stand more stably.

Time functions

The time functions can only be set when the radio is

switched off. If the time cannot be set using the RDS

signal, the default time of the world receiver starts at

0:00 00.

The settings are lost if the device is disconnected

from its power supply.

Time, date, time zone and world time

You can use the MODE button to set the time, date

and time zone, query the world time and set the

date alarm, medium wave reception, alarm time

reception, hourly mode and time update.

When you press MODE, the function to be set flashes

for about15 seconds. During this time, adjust the

setting with the

UP/DOWN buttons.

• Press

MODE x1: Set clock time.

• Press

MODE x 2: Set the date.

• Press

MODE x 3: Set time zone

(„Local city”).

• Press

MODE x 4: Show world time.

• Press

MODE x 5: Date alarm.

• Press

MODE x 6: Set reception range for

medium wave.

• Press

MODE x 7: Set alarm pause.

• Press

MODE x 8: Set 12/24 hour mode.

• Press

MODE x 9: Set automatic time query.

To apply a setting, just wait until the screen stops

flashing (the screen reverts to the time indication)

or press

MODE to move on to the next function.

Setting clock time

• Press MODE once. The most recently set time

flashes on the screen.

• Press the

UP or DOWN button to move the time

forward or backward at minute intervals.

Hold down one of the buttons for a few

seconds to move the setting forward or

backward quickly at 10 minute intervals.

Note:

Set the time without summer time offset.

If summer time is required, this can be set

when setting the time zone (see below).

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 6

- 7 -

Setting the date

• Press MODE again or twice.

The date set flashes on the screen (Tu 01:01 08

when first switched on).

• Press the

UP or DOWN button to move the date

forward or backward. Keep either of these

buttons pressed for a few seconds to change

the date in ten-day steps.

The weekday indication follows automatically.

The indication uses the first two letters of the

English name of the day.

The built-in calendar runs from 2000 to 2099.

Day of the week indication:

Su = Sunday

Mo = Monday

Tu = Tuesday

We = Wednesday

Th = Thursday

Fr = Friday

Sa = Saturday

Setting the time zone

• Press MODE again or three times. The selected

time zone flashes on the screen as the abbre-

viation for the corresponding city (UTC when

first switched on); the time disappears.

• Press the

UP or DOWN button to move the time

zone forward or backward.

The following table summarises the city abbrevia-

tions for the time zones and time differences.

*UTC

UTC (Universal Time Coordinated UTC) is the

reference for the times of the various time zones

around the world.

Short

code

Difference

from CET

Town

HNL –10:00 Honolulu/USA

ANC –9:00 Anchorage/USA

YVR –8:00 Vancouver/Canada

LAX –8:00 Los Angeles/USA

DEN –7:00 Denver/USA

CHI –6:00 Chicago/USA

MEX –6:00 Mexico City/Mexico

NYC –5:00 New York/USA

YYZ –5:00 Toronto/Canada

YUL –5:00 Montreal/Canada

CCS –4:00 Caracas/Venezuela

RIO –3:00 Rio de Janeiro/Brazil

BUE –3:00 Buenos Aires/Argentina

UTC* 0:00 Universal Time Coordinated

LON 0:00 London/GB

MUN 1:00 Munich/Germany

FRA 1:00 Frankfurt/Germany

PAR 1:00 Paris/France

ROM 1:00 Rome/Italy

CAI 2:00 Cairo/Egypt

IST 2:00 Istanbul/Turkey

MOW 3:00 Moscow/Russia

KWI 3:00 Kuwait City/Kuwait

DXB 4:00 Dubai/United Arab Emirates

KHI 5:00 Karachi/Pakistan

DAC 6:00 Dhaka/Bangladesh

BKK 7:00 Bangkok/Thailand

SIN 8:00 Singapore

HKG 8:00 Hong Kong

PEK 8:00 Beijing/China

TYO 9:00 Tokyo/Japan

SYD 10:00 Sydney/Australia

NOU 11:00 Noumea/New Caledonia

AKL 12:00 Auckland/New Zealand

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 7

- 8 -

Summer time offset

• While the time zone indication is still flashing,

press the

SNOOZE button. The screen shows the

SUN OFF message when summer time has

been deactivated.

• Press the

SNOOZE button again. The screen now

shows SUN ON. Summer time offset is now

activated and the clock moves one hour

ahead.

Show world time

• Press MODE again or four times to show the

world time. The city abbreviation appears with

the corresponding time.

• Press the

UP or DOWN button to move the time

zone forward or backward.

Special date alarm

• Press the MODE button a fifth time to set the spe-

cial date alarm. The screen flashes SDA1 and

the date in succession.

• Press the

PAGE button to select one of the ten

settable date alarms (SDA1–SDA10).

• Press the

UP or DOWN button to set the date on

which the alarm should sound.

• Press the

SNOOZE button to ignore the year num-

ber setting so that the alarm sounds every year.

• If the current date is the same as the SDA date,

an alarm sounds every hour from 8 o’clock on

this day. In addition, the SDA message will

flash on the screen.

• Turn off the alarm by pressing any button.

Note:

In order to completely deactivate the date

alarm set a date that is in the past!

Setting 12/24 hour mode

• Press MODE eight times. The screen shows

the 24 HR message for 24 hour mode.

• Press the

UP button to set the 24 hour mode.

• Press the

DOWN button to set the 12 hour mode.

12 HR is displayed on the screen. In the afternoon

in addition PM is shown on the screen.

Automatic update (RDS)

The RDS signal transfers additional information such

as the station name, time or song title to the radio.

The time is updated automatically when the RDS

signal is received.

• Press

MODE nine times. The screen displays

UPDA ON if the update function is activated.

• Press the

UP button to activate the automatic

update.

If the radio is switched on, a clock symbol now

flashes to the top left of the screen. The time is

now updated automatically if a station with an

RDS signal is received. The update is complete

when the clock symbol stops flashing and is

displayed permanently.

• Press the

DOWN button to deactivate the auto-

matic update. The screen displays UPDA OFF.

When the radio is switched on, no clock sym-

bol is displayed.

Select display mode

You can select which information is shown on the

screen when the radio is switched off.

The selected mode is indicated by a corresponding

symbol on the screen.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 8

- 9 -

When the radio is switched off, select the display

mode by repeatedly pressing the

FINE button in

accordance with the following table:

Symbol on the screen display mode:

CLK only the time is displayed.

CITY the time and world time are shown

in succession.

DATE the time and date are shown in

succession.

CIT DAT the time, date and world time are

shown in succession.

Alarm function

The world receiver provides two alarms that can

be set independently of one another, AL1 and AL2.

For both, you can set ...

... whether the alarm should operate on every

day of the week or only from Monday to

Friday;

... whether you wish to be woken by the alarm

tone or the radio.

Setting the alarm time

You can set two alarm times in your world receiver.

• Press the

VOL.+/AL–1 (or VOL.–/AL–2) button.

The screen shows the most recently set alarm

time and the symbol for the alarm type.

• Press the

UP or DOWN button to move the alarm

time forward or backward at minute intervals.

Hold down one of the buttons for a few sec-

onds to move the setting forward or backward

quickly at10 minute intervals.

Alarm function Symbol on the screen

Acoustic signals

Radio

Switched off No symbol

• Press the VOL.+/AL–1 (or VOL.–/AL–2) button until

the desired alarm function (see table above)

is indicated on the screen.

• Press the

SNOOZE button to set the weekday on

which you want the alarm to sound:

You can choose between week days

(Mo, Tu, We, Th, Fr), weekend (Su, Sa), every

day (Su, Mo, Tu, We, Th, Fr, Sa) or the current

day of the week. The selected setting is shown

on the screen.

• Press the

SNOOZE button until the desired alarm

days are set. Hold down the

SNOOZE button until

the screen shows an individual week day.

• Press the

SNOOZE button to set the desired week

day.

To go back to selecting week days, weekend or

every day, briefly hold down the

SNOOZE button

again.

• Press the MODE button to save the setting and re-

turn to the time mode. The setting is also saved

if you wait around15 seconds until the screen

returns to displaying the time.

When the alarm sounds ...

• and the „Radio” alarm function has been

selected, the radio operates for one hour at

a predefined alarm volume. To switch off press

the

VOL.+/AL–1 (or VOL.–/AL–2) button.

• and the „signal sounds” alarm function has

been selected, the signal sound is played for

10 minutes. To switch off press the

VOL.+/AL–1

or VOL.–/AL–2 button.

Note:

Please note that a station must be selected

(see below) for the radio alarm to work.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 9

- 10 -

Interrupting the alarm

• Press the SNOOZE button to interrupt the alarm

for10 minutes.

Set snooze time

• Press the MODE button seven times; the screen

displays the snooze time set

(default is SNO10).

• Use the

UP and DOWN buttons to set the snooze

time to a time between 1 and 59 minutes.

Turning off the alarm function

• Press the VOL.+/AL–1 or VOL.–/AL–2 button until

the relevant alarm symbols disappear from

the screen.

Stop watch function

The stop watch function is only available when the

radio is switched off.

• Press and hold down the PAGE button for around

2 seconds, the screen shows 00.00.0 U.

• Press

SNOOZE to start the stop watch. The maxi-

mum time for the stop watch is 99 minutes and

59 seconds. If the stop watch exceeds the maxi-

mum time, 99:59.0 is displayed and flashes.

• During time measurement, it can be stopped by

pressing

SNOOZE.

• Pressing

SNOOZE again restarts the stop watch.

• Hold down

SNOOZE to reset the stop watch.

• Leave the stop watch by pressing

PAGE.

Countdown function

The countdown function is only available when

the radio is switched off.

Set and save countdown

• Press and hold down the MEMORY SCAN button

for around 2 seconds, the screen shows

D 00.00.

• Press the

UP or DOWN button to set the

desired time.

5 countdown times are preset on the memory

buttons and you can open these directly using

the corresponding memory button:

Button

M.0/5 10:00

Button

M.1/6 30:00

Button

M.2/7 45:00

Button

M.3/8 60:00

Button

M.4/9 90:00

• Press the

MEM button to save the set time, the

memory space indicator

MEM flashes on the

screen. Now use the

M.0/5–M.4/9 buttons to

select a memory space; when you press the

relevant memory key the time is saved in this

memory space and the time previously stored

there overwritten.

• When the

MEMORY SCAN button is pressed again

you leave the countdown mode.

Call up and activate the countdown function

• Press and hold down the MEMORY SCAN button

for around 2 seconds, the screen shows

D 00.00.

• Select the desired, saved countdown time with

the aid of the

M.0/5–M.4/9 memory buttons.

• Press

SNOOZE to start the countdown. Pressing

the

SNOOZE button again pauses the countdown.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 10

- 11 -

When the set time has been counted down, an

alarm sound plays for one minute becoming

gradually higher in tone and louder.

• Press the

MEMORY SCAN button to pause the

countdown and leave countdown mode.

Radio operation

Switching on/volume control

• Press the POWER ON button to switch the radio

on. ON will appear briefly on the screen,

followed by the current frequency and band

selection.

• Press the

VOL.+/AL–1 or VOL.–/AL–2 button to

control the volume:

Button

VOL.+/AL–1: louder.

Button

VOL.–/AL–2: quieter;

The volume is shown on the bar indicator to the

bottom right of the screen.

Switch on bass amplifier

• When the radio is switched on, press the BASS

button to switch on the bass amplifier. The

screen will flash BASS.

• In order to switch the bass amplifier off again,

press

BASS one more time. The BASS message

disappears.

Turning off

• Switch the radio off by pressing the POWER

button. OFF is shown briefly on the screen

and the time is displayed again.

Sleep function

You can activate the sleep function via the SNOOZE

button. You can set a time of up to 90 minutes in ten-

minute steps, after which the radio will automatically

turn itself off. To do so, first switch the radio off.

• Press the

SNOOZE button. The symbol for the

sleep function and 90 (for 90 minutes)

will appear.

• Press the

SNOOZE button repeatedly until 90

is displayed to count down the sleep time

in 10 minute steps.

• Either select a sleep time (the sleep symbol

remains on the screen) or press

SNOOZE

again until OFF appears on the screen.

The sleep function is now switched off.

Setting the station

• Select the required frequency band (FM, MW,

LW or SW), using the frequency select button.

The corresponding abbreviation will appear on the

screen.

• The UP and DOWN buttons can now be used

to set the desired frequency.

• If you keep

UP or DOWN pressed for about three

seconds, the automatic station search will start.

• The search stops as soon as a station with

sufficient signal strength is found.

In the FM frequency range the RDS symbol

is displayed if an RDS station is received.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 11

- 12 -

Setting the MW band

Since the radio transmitter systems differ from one

country to another, you should make the appro-

priate setting via the reception range setting:

• Press the

MODE button six times and then use the

UP or DOWN button to select the corresponding

reception range as per the following table:

Region Channel spacing Band range

America 10 kHz 520–1710 kHz

Europe 9 kHz 522–1656 kHz

Fine tuning

If a station can not be found precisely the fine

tuning can be use to improve reception.

• During the channel search press the FINE

button, the screen shows FINE.

• The

UP and DOWN buttons can now be used to set

the desired frequency in half frequency steps.

• By pressing the

FINE again you leave the fine

tuning function again.

This function is not available for the LW frequency

range.

Aerial

The rotatable telescopic aerial on the radio can be

used for the FM and SW bands.

• Pull the aerial out fully and arrange it for

optimum reception.

The SW SEN. switch on the left side of the device

can be used to improve the reception quality for

the SW band. Select LX for strong stations and RX

to improve reception for weak stations.

The telescopic aerial does not work in the MW and

LW bands. In these bands, the radio uses its built-in

ferrite aerial.

• Align the radio for best reception.

Memory functions

Save station

The world receiver can save 400 stations in each

frequency range.

To store a station, proceed as follows:

• Set the frequency range with the frequency

selection switch and then the station that you

want to save (see above).

• Press the

MEM button. The screen shows the

PAGE memory page and MEM flashes.

• Within 10 seconds press the

PAGE button

(the PAGE message flashes), and then select

a memory page (from 00–39) using the

or DOWN button.

• Within 10 seconds use the

M.0/5–M.4/9 buttons

to select a memory space to store the station.

For example, press the

M.0/5 button once for

memory space 0 and again for memory space 5.

The occupancy is shown on the screen.

• Press

MEM again to save the station. The PAGE

and MEM messages are shown on a perma-

nent basis.

Note:

If the world receiver is connected to the mains

adapter and no batteries have been inserted,

the station memories are lost when the adapter

plug is pulled from the socket.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 12

- 13 -

Selecting a saved station

• In order to select a saved station directly, first

use the frequency selection switch to select the

frequency range where the station is saved.

• Press the

PAGE button and then use the UP or

DOWN buttons to select a memory page (from

00–39).

• Within 10 seconds press the

M.0/5–M.4/9

buttons to select a memory space to store

the station.

The station is played immediately after entering

the memory space.

Carry out automatic station search

Your world receiver can search the frequencies with-

in a range and store the stations it finds. Do the fol-

lowing to activate the automatic search (automatic

memory scan/AMS):

• Press the

MEM button once.

The MEM message flashes.

• Hold down the

MEMORY SCAN button

for about 1 second.

The world receiver now searches all frequencies in

the currently selected frequency range and saves

the stations it finds from the currently set memory

page and memory space.

Displaying memory spaces

• Press the MEMORY SCAN button to call up the

content of all station memories for the selected

band.

All stored stations will be played in succession

for about five seconds.

• Press any button to stop playing the memory

spaces.

Cleaning

Risk of injury from electric shock!

• Never immerse the device’s parts into water

or other liquids!

• Do not allow liquid to penetrate the housing.

Cleaning the housing

Clean the housing surface with a slightly damp

cloth. Never use petrol, solvent or detergents that

could attack the plastic!

Disposal

Do not dispose of the appliance in

your normal domestic waste. This

product is subject to the European

guideline 2002/96/EC.

Dispose of the appliance through an approved

disposal centre or at your community waste facility.

Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal

centre.

Battery disposal

Batteries may not be disposed of with normal

domestic waste. All consumers are statutorily

obliged to dispose of batteries at the collection po-

int in their community/district or with the

original supplier.

The purpose of this obligation is to ensure that

batteries can be disposed of in an environmentally

friendly manner. Only dispose of batteries when

they are fully discharged.

Disposal of packaging

Dispose of all packaging materials

in an environmentally friendly manner.

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 13

- 14 -

Warranty & service

You receive a 3-year warranty on this device from

the date of purchase. If, in spite of our high quality

standards, you have reason to complain about this

device, please contact our service hotline.

If it is not possible to deal with your complaint by

phone, they will provide

• a processing number (RMA number) and

• an address where you can send your product

for repairs under the warranty.

If you send the device please enclose a copy of the

proof of purchase (till receipt). The device must be

packaged securely for transport and the RMA num-

ber must be directly visible. Shipments without an

RMA number can not be processed.

Note:

The warranty applies to material or

manufacturing faults.

The warranty does not apply to

• parts subject to wear and tear.

• damage to breakable parts such as

switches and rechargeable batteries.

The product is only designed for private and not

commercial use. Improper handling and usage not

in accordance with the intended purpose, use of

force and any interventions that are not carried out

by our authorised service centre will render the

warranty null and void. This warranty does not

affect your legal rights.

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

D-44867 BOCHUM

www.kompernass.com



IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 14

Complete this section in full and enclose with the device!

Please write sender’s details clearly:

Name

First name

Street

Postal code/city or town

Country

Telephone

Date/signature

Description of fault:



Warranty

DES Ltd

Units 14-15

Bilston Industrial Estate

Oxford Street

Bilston

WV14 7EG

Tel.: 0870/787-6177

Fax: 0870/787-6168

e-mail: support.uk@kompernass.com

Irish Connection

Harbour view

Howth

Co. Dublin

Tel: 00353 (0) 87 99 62 077

Fax: 00353 18398056

e-mail: support.ie@kompernass.com

www.mysilvercrest.de

In order to ensure free repairs,

please contact our service hotline.

Ensure that you have your receipt

with you.

MULTI-BAND RADIO

KH 2029

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 15

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 16

- 17 -

SISÄLLYSLUETTELO SIVU

Käyttötarkoitus 18

Tekniset tiedot 18

Turvallisuusohjeita 19

Käyttölaitteet 20

Käyttöönotto 21

Pakkauksen purkaminen ................................................................................................................21

Toimitussisällön tarkistaminen........................................................................................................21

Verkko- ja paristokäyttö .................................................................................................................21

Yleiset toiminnot 22

Näppäinlukitus ...............................................................................................................................22

Näytön valaistus ............................................................................................................................22

Tukijalka ..........................................................................................................................................22

Aikatoiminnot 22

Kellonaika, päivämäärä, aikavyöhyke ja maailmanaika...........................................................22

Näyttötilan valitseminen................................................................................................................24

Herätystoiminto...............................................................................................................................25

Ajanottotoiminto .............................................................................................................................26

Lähtölaskentatoiminto.....................................................................................................................26

Radiokäyttö 27

Kanavan valitseminen....................................................................................................................27

Kanavan hienosäätö......................................................................................................................28

Antenni ............................................................................................................................................28

Tallennustoiminnot..........................................................................................................................28

Puhdistus 29

Kotelon puhdistaminen ..................................................................................................................29

Hävittäminen 29

Takuu & huolto 30

Maahantuoja 30

Säilytä käsikirja myöhempää käyttöä varten. Jos myyt laitteen, anna käsikirja uudelle omistajalle!

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 17

- 18 -

MAAILMANRADIO

KH 2029

Käyttötarkoitus

Tämä laite on tarkoitettu yleisesti sallittujen

radiolähetysten vastaanottamiseen kaikissa maissa

(maailmanradio) ja käytettäväksi pelkästään

yksityistalouksissa.

Sitä ei ole tarkoitettu yleisesti ei-sallittujen lähetysten

vastaanottamiseen, käyttöön turvallisuusradiolaitteis-

tojen osana, esim. urheiluveneissä, eikä käyttöön

kaupallisissa tai teollisissa ympäristöissä. Sitä ei ole

myöskään tarkoitettu käytettäväksi muissa sää- ja

ympäristöolosuhteissa kuin teknisissä tiedoissa on

ilmoitettu.

Tekniset tiedot

Laite on tarkastettu ja hyväksytty EMC-direktiivin

2004/108/EC vaatimusten ja muiden olennaisten

määräysten.

Tehonotto: 5 wattia

Tehonotto

Standby-tila: 1,3 wattia

Käyttölämpötila: + 5

+ 35° C

Kosteus: 5

90 %

(ei kondensaatiota)

Mitat

(p x l x k): 180 x 40 x 110 mm

Paino: n. 380 g

Paristot

4 x 1,5 V, tyyppi AA/LR6/mignon

(eivät sisälly toimitussisältöön)

Radion taajuusalue

UKW (FM) 87–109 MHz

KW (SW) 5,85–17,90 MHz

MW (AM) Eurooppa 522–1656 kHz

MW (AM) USA 520–1710 kHz

LW 144–299 kHz

Yllä ilmoitetut säädettävät taajuusalueet ovat

mahdollisia laitteen teknisten ominaisuuksien

johdosta.

Eri maissa voi olla voimassa poikkeavia kansallisia

määräyksiä, jotka koskevat ilmoitettuja radio-

taajuusalueita. Muista, että ohjeiden mukaisen

radiotaajuusalueen ulkopuolelta vastaanotettuja

tietoja ei saa käyttää hyväksi, niitä ei saa välittää

kolmansille tahoille, eikä niitä saa käyttää

tarkoituksen vastaisesti.

Säätöalueet

FM (UKW) 100 kHz/50 kHz

KW (SW) 5 kHz/1 kHz

MW (AM) Eurooppa 9 kHz/1 kHz

MW (AM) USA 10 kHz/1 kHz

LW 1 kHz

Herkkyys: SW 2 tasoa

säädettävissä

Yleistä

Tallennuspaikat: 400 kanavaa

Kuuloke-

lähtö: 3,5 mm stereoliitin

Kuulokelähtö

Suurin sallittu

lähtöjännite: 30-60 mV

IB_KH2029_AR23586_LB3A 18.08.2008 16:27 Uhr Seite 18

Sidan laddas ...

Silvercrest KH 2029 Operating Instructions Manual

varumärke: Silvercrest

Modell: KH 2029

Kategori: Bordsklockor

Typ: Operating Instructions Manual

Ladda ner pdf

Rapportera

på andra språk

eesti: Silvercrest KH 2029
English: Silvercrest KH 2029

Silvercrest KH 2029 Operating Instructions Manual

Silvercrest KH 2029 Operating Instructions Manual

på andra språk

Relaterade papper

Andra dokument