MILL Oil Premium AB-H1500DN Assembly And Instruction Manual

Assembly and instruction manual

Series:

Oil Premium

Please read the instructions carefully before use.

Take good care of this manual for later use.

EN

DK

FI

NO

SE

This product is only suitable for well insulated spaces or occasional

use.

Dette produktet er kun egnet til godt isolerte rom eller ved

sporadisk bruk.

Dette produkt er kun egnet til godt isolerede rum eller leijlighedsvis

brug.

Denna produkt är endast lämplig för välisolerade utrymmen eller

sporadisk användning.

Tämä tuote soveltuu ainoastaan hyvin eristettyihin tiloihin tai

satunnaiseen käyttöön.

Thanks for buying Mill

Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution

of oil lled radiators and other types of heaters. From 1992 to 2009, we had gained

signicant knowledge and expertise of dierent type of heaters, thus enabling us to

sell to many of the largest retailers in the Nordic countries.

In 2010, Cato’s son, Phillip joined the company. Philip looked at the heating industry

with fresh new eyes and wondered why there had been so little change with the

appearance of portable heaters in the last 20 years, especially since interior design in

general had changed dramatically over the years. Philip thought consumers should

have more styles to choose from other than the typical old-fashioned, traditional

heaters.

Since heaters are part of so many homes, Philip and Cato decided to use their

extensive knowledge to re-invent the design of heaters. They wanted to create

beautiful, modern and minimalistic heaters, using the most advanced technology, that

would complement people’s homes. They launched the brand “Mill” in 2012.

Mill oers revolutionary, innovative Norwegian designs. We are continuously innovating

to complement our line of products to meet consumers’ demand.

Prospering on our success in the Nordics we decided to promote Mill at some of the

world’s largest electronic fairs and home shows in 2015 and 2016 - the feedback from

retailers and distributors all over the world were amazing. We are proud to say that

consumers in over 25 countries can now keep warm with style!

Follow us on social media:

.com/millheat

@millheat

millheat.com

[email protected]

@

1

millheat.com

EN

Content

P. 2-3

P. 4

P. 5

P. 6

P. 7

P. 8

P. 9

P. 10

P. 11

Important safety information

Specications

Before rst use

First use

Description of heater

Parts

Assembly

Instructions mechanical thermostat

Usage mechanical thermostat

Instructions day/night thermostat

Usage day/night thermostat

Timer function

Day- and nighttime setback

How to activate daytime setback

How to activate nighttime setback

Change setback temperature – daytime

Change setback temperature – nighttime

Change number of hours – daytime

Change number of hours – nighttime

Cancel (skip) setback period

Delete setback program

Temperature calibration

Resetting the heater

Memory function

Maintenance

Warranty

Waste disposal

|

Please read the instructions carefully before use.

Take good care of this manual for later use.

IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

STORE THIS INSTRUCTION

MANUAL FOR FUTURE USE!

NEVER TOUCH YOUR HEATER OR ITS

CASING WITH WET HANDS!

2

EN

You must obey common safety guidelines when using electrical

products, especially in the presence of children.

WARNING! To avoid electric shock or damage due to the

heat, always make sure the plug is pulled out before the

heater is moved or cleaned.

READ THE INSTRUCTIONS CAREFULLY

• The product is intended for home use only.

• Make sure the heater is connected to the house's regular mains

(230 V), as indicated on the heater.

• New heaters will produce a specic odor when used the rst time.

This will stop aer a short time and is completely harmless.

• Check for any pieces of packing foam or cardboard that may

have fallen into the heating elements of the heater. These pieces

must be removed to avoid unpleasant odors.

• Prevent the heater from overheating – do not cover.

• Always turn o the heater and unplug it when not used for a

long period of time.

• Pay special attention if the heater is used in rooms where

children, the handicapped or elderly reside.

• The heater should not be set up directly beneath an electrical

socket outlet.

• The cord must not be laid under any kind of carpet. Make sure the

cord is laid in such a way that nobody can trip on it.

• The heater must not be used if either the cord or plug is

damaged. The heater must not be used if it has been dropped

on the oor or is damaged in any other way causing it to

malfunction.

• The cord must be repaired by the manufacturer or by an expert if it

has been damaged, to avoid dangerous situations.

• Avoid using extension cords, which may overheat and could

possibly start a re.

• Never cover the air vents on the heater. Avoid potential re

hazards by making sure the air intakes are not blocked or

covered. The heater should be used in rooms with normal at

oors.

Important safety information

3

millheat.com

EN

• The heater should not be installed in close proximity to

ammable materials of any kind because there can always be a

risk of re.

• The heater must never be used in rooms where gasoline, paint or

other ammable liquids are stored, such as in a garage.

• Never touch an electric heater with wet hands. The heater

should be installed so a person showering or taking a bath

cannot come into direct contact with it.

• Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children and

vulnerable people are present.

• The heater must be switched o, the plug removed and the

heater must cool down before it is moved.

• Avoid overloading the mains (the circuit) where the heater is

connected. The heater may overload the electrical circuit if

other electrical devices are plugged into the same socket outlet.

• Do not use this heater in small rooms when they are occupied

by persons not capable to leaving the room on their own, unless

constant supervision is provided.

• The product cannot be used by children under 8 years of age

and persons with reduced physical or mental abilities or lack

of experience and knowledge unless they have been given

supervision or instruction in the safe use of the product and

understand the hazards involved.

• Children should not play with the product. Cleaning and

maintenance should not be done by unsupervised children.

• Children under the age of 3 should be kept away from the

product, unless they are under constant supervision.

• Children aged 3 to 8 years are only permitted to turn the

product ON/OFF, assuming the heater is mounted according

to the assembly instructions and the children have received

instruction or supervision in the safe use of the product and

understand the hazards involved.

• Do not use this heater in the immediate surroundings of a bath,

a shower or a swimming pool.

4

EN

Specications

Before rst use

First use

Description of heater

Aer unpacking the heater, check to make sure the product was not damaged

during transport. Contact the retailer or importer if you discover any visible damages to

the product.

Keep the outer packaging to transport the heater in the future. If you want to dispose

the packaging, make sure it is done properly. Keep plastic bags away from children.

Aer turning on the heater for the rst time or aer an extended period without use,

the heater can produce a burnt odor for a short time. This is normal.

Please read all the instructions carefully before use. Save the instruction manual for future

use.

It is also normal for the heater to make “sounds” when it warms up or cools down.

Please see table above for which models that have mechanical/day- and night

thermostats

Day/night thermostat

and Mechanical thermostat

Model Thermostat Color Amperage

Power

(W)

Mill Heat

Boost

AB-H1000MEC

Mechanical White ~220-240 V/50-60Hz 1000 Yes

AB-H1000DN

Day/night White ~220-240 V/50-60Hz 1000 Yes

AB-H1500DN

Day/night White ~220-240 V/50-60Hz 1500 Ye s

AB-H2000DN

Day/night White ~220-240 V/50-60Hz 2000 Yes

AB-H1000DN GLASS

Day/night Glass ~220-240 V/50-60Hz 1000 Yes

AB-H1000DN BLACK

Day/night Black ~220-240 V/50-60Hz 1000 Yes

See gure 1 on separate illustration sheet

A B

C

1. Heat emission

2. LED display

3. Control panel

4. Output selector and thermostat

5. ON/OFF

6. Legs (aluminium)

1. Heat emission

2. Indicator light

3. Thermostat

4. Output selector

5. Legs (aluminium)

5

millheat.com

EN

Parts

Assembly

Instructions mechanical thermostat

1. 2 rails for the feet

2. 2 foot brackets

3. 8 screws (pre-mounted)

1. Remove the pre-mounted screws on both legs before you insert them into the

brackets, so that you get a stable foot.

2. Attach the legs to the brackets by tightening 2 screws into each bracket.

3. Remove the pre-mounted screws from the bottom of the heater and place the

heater gently on its head to mount the feet.

4. Two screws must be fastened on each foot bracket.

5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.

Please see table on page 4 for which models that have mechanical thermostats

Control panel

See gure 4 on separate illustration sheet

1. Indicator light

2. Thermostat: Adjust the desired heat setting

3. Output selector:

0: OFF

I: Low

II: Medium

III: High

WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE

INSTRUCTIONS BEFORE USING THE HEATER!

See gure 2 on separate illustration sheet

See gure 3 on separate illustration sheet

6

EN

Usage mechanical thermostat

1. Set the output selector to the OFF position (0) and the thermostat to minimum.

Plug the heater into a grounded outlet.

2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum

position. When the desired room temperature has been reached, turn the

thermostat slowly down until you hear a click. The thermostat can now remain in

this position until a dierent room temperature is desired. As soon as the room

temperature falls below this level, the heater will automatically switch on again.

When the room has again reached the desired temperature, the heater will switch

o again.

3. If you wish to change the room temperature, repeat the instructions in step 2.

4. The heater has an overheat protection that turns the device o if any parts become

extremely hot.

5. To switch the heater o, turn the output selector to the 0 position. If the heater will

be le unused for a longer period of time, pull out the plug.

Please see table on page 4 for which models that have day- and night thermostats

Control panel

1. Standby

2. Daytime setback

3. Nighttime setback

4. Power indicator — Shows whether the heater is using power or not

5. Desired room temperature

6,7,8 Indicates the output level

9. Timer function

10. Daytime setback activation button

11. Nighttime setback activation button

12. Function button

13. Timer activation button

14. Thermostat and output selector:

i. Turn the selector to the le to decrease the temperature, and turn the selector

to the right to increase the temperature.

ii. Push the button to change the desired power level. 3 power levels

WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE

INSTRUCTIONS BEFORE USING THE HEATER!

Instructions day/night thermostat

See gure 5 on separate illustration sheet

If the temperature sensor is not functioning properly, you will see this

symbol on the display. Please contact the dealer or importer.

7

millheat.com

EN

Usage mechanical thermostat Usage day/night thermostat

1. Plug the heater into a grounded outlet.

2. Press OFF/ON button.

3. Choose the desired power |, || or |||, by pressing the output selector. Turn the

thermostat to the desired temperature while looking at the display. As soon as the

room temperature drops below this level, the heater will automatically start again.

When the room has reached the desired temperature again, the heater will turn

itself o.

4. The thermostat goes from 5 to 35°C.

5. If you want to change the temperature in the room, repeat step 3.

6. The heater has an overheat protection that turns the device o if any parts become

extremely hot.

7. To turn o the heater, press the OFF/ON button. Should the heater be le unused

for a longer period of time, pull out the plug.

See gure 6 on separate illustration sheet

Timer function

The timer function will turn o the heater aer a desired number of hours have passed.

See gure 7 on separate illustration sheet

Day- and nighttime setback

When programming the heater for either day- or nighttime setback, the setback

period will be active from the time you register the program. Which means; if you want

to start your daytime setback at 7.30 am, you need to register the program at 7.30 am.

You only need to program the heater 1 time for daytime setback and 1 time for

nighttime setback. If you have programmed the heater, the setback programs will be

active on the following days:

Daytime setback: Monday-Friday (day 1-5)

Nightime setback: All nights

EXAMPLE:

Let us say you want to program the heater for both daytime- and nighttime setback

(normally the heater is set to 23 degrees). You want the heater to do the following:

1. Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17

degrees

2. Nighttime setback activated from 10.00 pm to 6.00 am. Desired temperature: 18

degrees

8

EN

1. Tuesday 7.30 am you go to the heater and press on the heater’s control panel.

2. “d” will be visible in the display. Use the wheel to set what day it is today when

you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not

programming the heater for the various days. This is simply to tell the heater what

day it is when you are programming the heater, since the daytime setback is active

only Monday-Friday. Select 2 for Tuesday. Conrm by pressing

3. “C” will ash in the display. Use the wheel to set 17 as the desired temperature for

daytime setback. Conrm by pressing

4. “H” will ash in the display. Use the wheel to set 7 hours as desired setback period

(meaning it will be active from 7.30 am to 2.30 pm). Conrm by pressing

5. The daytime setback will now be active from 7.30 am to 2.30 pm Monday-Friday.

Setback temperature is 17 degrees.

How to activate daytime setback

See gure 8 on separate illustration sheet

*Control light is green when the heater is in an active setback period. The control

light is red when the setback period is inactive but programmed.

How to activate nighttime setback

1. At 10.00 pm you go to the heater and press on the heater’s control panel.

2. “C” will ash in the display. Use the wheel to set 18 as the desired temperature for

nighttime setback. Conrm by pressing

3. “H” will ash in the display. Use the wheel to set 8 hours as desired setback period

(meaning it will be active from 22.00 pm to 6.00 am). Conrm by pressing

4. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The

setback temperature is 18 degrees.

*Control light is green when the heater is in an active setback period. The control

light is red when the setback period is inactive but programmed.

N.B. If a power cut occurs/you turn o the heater, the programming will be lost and

you will have to do this over again.

ATTENTION! 2012 models (series nr. HL12) have a dierent set up where you are not

asked to register number of hours and temperature while programming. The standards

are as follows:

Daytime setback: 5 hours and 17 degrees

Nighttime setback: 7 hours and 17 degrees

Besides this they follow the same set up.

See gure 9 on separate illustration sheet

9

millheat.com

EN

How to activate daytime setback

Change setback temperature – daytime

Press and hold and press 3 times.

Enter the desired temperature for daytime setback. Save by pressing or wait for

15 seconds for automatic conrmation.

See gure 10 on separate illustration sheet

Change number of hours – daytime

Press and hold and press 2 times.

Enter the desired number of hours for daytime setback. Save by pressing or wait

for 15 seconds for automatic conrmation.

See gure 12 on separate illustration sheet

Change setback temperature – nighttime

Press and hold and press 3 times.

Enter the desired temperature for nighttime setback. Save by pressing or wait

for 15 seconds for automatic conrmation.

See gure 11 on separate illustration sheet

Change number of hours – nighttime

Press and hold and press 2 times.

Enter the desired number of hours for nighttime setback. Save by pressing or

wait for 15 seconds for automatic conrmation.

See gure 13 on separate illustration sheet

Cancel (skip) setback period

Press and hold and press or once (depending on which setback period

you want to cancel).

* The heater will skip an active setback period or the next setback period.

* During the next setback period, the heater will automatically resume the

programmed temperature reduction.

See gure 14 on separate illustration sheet

10

EN

Delete a setback program

Press and hold or (depending on which setback period you want to cancel)

for 3 seconds.

See gure 15 on separate illustration sheet

See gure 17 on separate illustration sheet

Temperature calibration

Resetting the heater

Turn o the heater's main switch. Press and hold while you turn on the heater's

main switch.

It may occur deviation between the temperature registered by the heater and the

actual temperature in the room. This can be caused by several reasons, however, the

most common is that the heater is placed in a fair distance from where you usually

reside. When you set the temperature to for example 22 degrees, it is only natural that

you expect the same temperature where your sofa is placed for instance. However,

the temperature sensor is placed on the product itself, and therefore a deviation in

temperature may occur. To adjust this, all Mill heaters are equipped with a calibration

function, which enables you to adjust the temperature registered by the heater. N.B!

The room must have achieved a stable temperature before any calibration.

Press 2 times and use + or – to set the actual temperature observed in the room.

Conrm with or wait 15 seconds for automatic conrmation.

See gure 16 on separate illustration sheet

Memory function

The heater remembers all the temperature settings and will automatically return to

the desired temperature aer a power cut. Your day- and nighttime setbacks will

however be deleted aer a power cut, and you will need to register the programs

again.

11

millheat.com

EN

Mill International AS

Grini Næringspark 10

1361 Østerås

Norway

Tel: +47 22 13 32 00

www.millheat.com

[email protected]

Maintenance

Warranty

Waste disposal

1. For cleaning, always unplug the heater and leave it to cool.

2. Wipe the heater regularly with a damp cloth and dry the surface before turning on

the heater again.

3. The heater must be cleaned at least once a month during the heating season.

CAUTION! The heater should never be immersed in water.

Avoid using detergents to clean the heater.

Never let any water get inside the heater; this can be hazardous.

4. Dust etc. should be removed with a so cloth.

5. The heater can be stored in a dry and clean place.

6. If the heater stops working, do not attempt to repair it yourself because it can

cause a re hazard and/or electric shock.

The warranty is valid for 2 years. The heater will be repaired or replaced during

this time should any malfunction occur. The warranty applies if the heater is used

according to these instructions and the customer can present a purchase receipt. If

the heater malfunctions in any way, please contact the store where it was purchased

or the importer.

The symbol indicates that this product is not to be disposed of together with

household waste. This product must be delivered to a recycling service or container

for electrical appliances and electronic equipment. This is done to avoid health risks

and prevent harm to the environment. Local businesses (or the environmental station

in your neighborhood) are required by law to accept and recycle such products, as a

means of environmentally sound disposal.

Temperature calibration

Resetting the heater

Memory function

NO/DK

1

Innholdsfortegnelse

S. 2-3

S. 4

S. 5

S. 6

S. 7

S. 8

S. 9

S. 10

S. 11

Viktig sikkerhetsinformasjon

Spesikasjoner

Før førstegangsbruk

Førstegangsbruk

Beskrivelse av ovnen

Deler

Montering

Bruksanvisning mekanisk termostat

Bruk av mekanisk termostat

Bruksanvisning dag/natt termostat

Bruk av dag/natt termostat

Timerfunksjon

Dag- og nattsenking

Slik gjør du for å aktivere dagsenk

Slik gjør du for å aktivere nattsenk

Endre senketemperatur—dag

Endre senketemperatur—natt

Endre antall timer—dag

Endre antalI timer—natt

Kansellere (hoppe over) senkeprogrom

Slette senkeprogrom

Kalibrering av temperatur

Resette ovnen

Huskefunksjon

Vedlikehold

Garanti

Avfallshåndtering

|

Vennligst les bruksanvisningen nøye før bruk.

Ta godt vare på denne bruksanvisningen for

senere bruk.

FOR Å UNNGÅ OVEROPPHETING,

IKKE DEKK TIL OVNEN.

TA VARE PÅ DENNE

BRUKSANVISNINGEN!

HA ALDRI VÅTE HENDER PÅ-

ELLER

DEKK TIL OVNEN!

millheat.com

NO/DK

2

Vanlige sikkerhetsregler må alltid følges ved bruk av elektriske

artikler, spesielt når barn er tilstede.

ADVARSEL! For å unngå elektrisk støt eller skader på

grunn av varme, pass alltid på at støpselet er trukket ut før

ovnen yttes eller rengjøres.

LES BRUKSANVISNINGEN NØYE

• Produktet er kun beregnet for hjemmebruk

• Sørg for at ovnen kobles til husets vanlige strømnett slik ovnens

merke viser

• Nye ovner vil avgi en egen lukt når den brukes første gang. Dette gir

seg etter en kort stund og er helt ufarlig

• Sjekk at det ikke har falt rester (isopor/papp) fra innpakningen ned

på varmeelementene i ovnen. Slike rester må ernes for å unngå

ubehagelig lukt

• Unngå at ovnen blir overopphetet- må ikke tildekkes

• Skru alltid ovnen av (O) og dra ut kontakten når den ikke er i bruk

over lengre tid

• Vær spesielt oppmerksom hvis ovnen er i bruk i rom hvor barn,

handikappede eller eldre oppholder seg

• Ovnen må ikke stilles opp rett under et elektrisk kontaktpunkt

• Ledningen må ikke legges under tepper av noe slag. Påse at den

ligger på en slik måte at ingen kan snuble i den

• Ovnen må ikke brukes hvis ledningen eller kontakten er skadet. Den

må ikke brukes hvis den har falt i bakken (gulvet) eller er skadet på

annen måte, slik at den ikke fungerer normalt

• Hvis ledningen blir skadet må denne bli reparert av en fagperson

for å unngå farlige situasjoner

• Unngå å bruke skjøteledning, da en slik ledning kan bli

overopphetet og muligens starte en brann

• Dekk aldri til luinntakene på ovnen. Unngå en mulig brann ved å

sørge for at ovnens luinntak ikke er sperret eller tildekket. Ovnen

brukes i rom med vanlige rette gulv

Viktig sikkerhetsinformasjon

NO/DK

3

• Ovnen må ikke monteres rett ved brennbart materiale av noe slag

da det alltid kan være en fare for brann

• Ovnen må aldri brukes i rom hvor det lagres bensin, maling eller

andre lett antennelige væsker som for eks. i en garasje

• Ta aldri på en elektrisk ovn med våte hender. Ovnen monteres/

plasseres slik at en person som dusjer eller tar et bad ikke kan

komme i direkte kontakt med den

• Enkelte deler av denne ovnen kan bli veldig varme og forårsake

brennmerker på huden. Vær ekstra oppmerksom når barn og

sårbare personer er tilstede

• Ovnen må være skrudd av, kontakten tatt ut og ovnen være

kald før den blir yttet på

• Unngå overbelastning på strømnettet (kursen) hvor ovnen er

tilkoblet. Ta hensyn hvis andre elektriske apparater er koblet til

samme strømuttak eller kurs

• Bruk aldri ovnen i små rom hvor personer som ikke er i stand til

å forlate rommet av seg selv oppholder seg, med mindre de er

under konstant tilsyn

• Produktet kan ikke benyttes av barn under 8 år og personer med

reduserte siske eller psykiske evner eller som mangler erfaring

og kunnskap, om de ikke får tilsyn eller instruksjoner om bruk av

produktet på en sikker måte og forstår farene som er involvert

• Barn skal ikke leke med produktet. Rengjøring og vedlikehold

skal ikke utføres av barn uten tilsyn

• Barn under 3 år skal holdes unna produktet med mindre de har

kontinuerlig tilsyn

• Barn i alderen 3 til 8 år kan kun slå AV/PÅ produktet, forutsatt at

ovnen er montert slik monteringsanvisningen viser, og barna har

fått instruksjon eller tilsyn vedrørende bruk av produktet på en

sikker måte og forstår farene som er involvert

• Bruk aldri denne varmeovnen i nærheten av badekar, dusj eller

svømmebasseng

millheat.com

NO/DK

4

Spesikasjoner

Før førstegangsbruk

Førstegangsbruk

Beskrivelse av ovnen

Etter utpakking av produktet, kontroller om det er noen transportskader. Skulle det

være synlige skader på produktet, ta kontakt med butikken eller importør.

Ta vare på ytteremballasjen for senere transport av ovnen. Om du ønsker å kaste

emballasjen, sørg for at den blir kastet på forsvarlig vis. Hold plastposer unna barn.

Etter å ha skrudd på produktet første gang, eller etter et lengre opphold, vil det kunne

lukte “brent” i en kort periode. Dette er normalt.

Vennligst les hele denne bruksanvisningen nøye før bruk. Ta vare på bruksanvisningen

for senere bruk.

Det er også vanlig at produktet lager "lyder" i opp/ned-varmingsfasen.

Vennligst se tabelloversikt over for hvilke modeller som har mekanisk/dag- og natt

termostat.

Dag/natt termostat

og Mekanisk termostat

Modell Termostat Farge Strømstyrke

Eekt

(W)

Mill Heat

Boost

AB-H1000MEC

Mekanisk Hvit ~220-240 V/50-60Hz 1000 Ja

AB-H1000DN

Dag/natt Hvit ~220-240 V/50-60Hz 1000 Ja

AB-H1500DN

Dag/natt Hvit ~220-240 V/50-60Hz 1500 Ja

AB-H2000DN

Dag/natt Hvit ~220-240 V/50-60Hz 2000 Ja

AB-H1000DN GLASS

Dag/natt Hvit ~220-240 V/50-60Hz 1000 Ja

AB-H1000DN BLACK

Dag/natt Sort ~220-240 V/50-60Hz 1000 Ja

Se gur 1 på separat gurark

A B C

1. Utslipp varme

2. LED display

3. Knapper

4. Eekt og temperaturvelger

5. AV/PÅ

6. Ben (aluminium)

1. Utslipp varme

2. Indikatorlys

3. Temperaturvelger

4. Eektvelger

5. Ben (aluminium)

NO/DK

5

Deler

Montering

Bruksanvisning mekanisk termostat

1. 2 stk skinner til fot

2. 2 stk fotbraketter

3. 8 stk skruer (premontert)

1. Skru ut de premonterte skruene på begge bena før du fører de inn i brakettene, slik

at du får en fullverdig fot

2. Fest bena til brakettene ved å skru inn 2 skruer i hver brakett

3. Skru ut de premonterte skruene fra undersiden av ovnen og plasser ovnen forsiktig

på hodet for påmontering av fot

4. To skruer må festes i hver fotbrakett

5. BRUK ALDRI OVNEN FØR BENA ER SKRUDD ORDENTLIG PÅ

Vennligst se tabelloversikt side 4 for hvilke modeller som har mekanisk termostat.

Kontrollpanel

Se gur 4 på separat gurark

1. Indikatorlys

2. Termostat: Justere ønsket varme

3. Eektvelger:

0: AV

I: Lav

II: Medium

III: Høy

ADVARSEL! FØR OVNEN BRUKES, VÆR SIKKER PÅ AT FOTEN ER MONTERT RIKTIG I

FØLGE MONTERINGSANVISNINGEN!

Se gur 2 på separat gurark

Se gur 3 på separat gurark

millheat.com

NO/DK

6

Deler

Montering

Bruksanvisning mekanisk termostat

Bruk av mekanisk termostat

1. Sett eektvelgeren i AV posisjon (0) og termostaten på minimum. Sett støpslet i en

jordet stikkontakt

2. Sett eektvelgeren i posisjon |, || eller |||. Skru termostaten opp til maks posisjon.

Når den ønskede romtemperaturen er oppnådd, skru termostaten sakte tilbake til

du hører et klikk. Termostaten kan nå stå på dette punktet inntil ny romtemperatur

ønskes. Så snart romtemperaturen synker under dette nivået, vil ovnen automatisk

starte igjen. Når rommet igjen har nådd den ønskede romtemperatur, så vil ovnen

skru seg av igjen.

3. Om en ønsker å endre romtemperaturen, gjenta punkt 2

4. Ovnen har et overopphetingsvern som stenger ovnen om noen deler blir ekstremt

varme

5. For å skru av ovnen, skru eektvelgeren til 0 posisjon. Om ovnen skal forlates over

lengre tid, trekk ut støpselet

Vennligst se tabelloversikt side 4 for hvilke modeller som har dag/natt termostat.

Kontrollpanel

1. Standby

2. Dagsenking

3. Nattsenking

4. Strømindikator – viser om ovnen trekker strøm eller ikke

5. Ønsket romtemperatur

6,7,8 Indikerer valgt eektnivå

9. Timerfunksjon

10. Aktiveringsknapp dagsenking

11. Aktiveringsknapp nattsenking

12. Funksjonsknapp

13. Aktiveringsknapp timerfunksjon

14. Termostat og eektvelger

i. Vri til venstre for å redusere ønsket temperatur, og vri til høyre for å øke ønsket

temperatur

ii. Trykk inn knappen for å endre ønsket eektnivå. 3 eektnivåer.

ADVARSEL! FØR OVNEN BRUKES, VÆR SIKKER PÅ AT FOTEN ER MONTERT RIKTIG I

FØLGE MONTERINGSANVISNINGEN!

Om temperatursensoren ikke fungerer slik den skal vil du se dette

symbolet i displayet. Vennligst kontakt forhandler eller importør.

Bruksanvisning dag/natt termostat

Se gur 5 på separat gurark

NO/DK

7

Bruk av dag/natt termostat

1. Sett støpslet i en jordet stikkontakt.

2. Trykk inn AV/PÅ knappen

3. Sett ønsket eekt I, II eller Ill, ved å trykke inn eektvelgeren. Skru termostaten til

ønsket romtemperatur ved å se i displayet. Så snart romtemperaturen synker under

dette nivået, vil ovnen automatisk starte igjen. Når rommet igjen har nådd den

ønskede romtemperatur, så vil ovnen skru seg av igjen.

4. Termostaten går fra 5 til 35 grader Celsius

5. Om en ønsker å endre romtemperaturen, gjenta punkt 3

6. Ovnen har et overopphetingsvern som stenger ovnen om noen deler blir ekstremt

varme

7. For å skru av ovnen, trykk inn AV/PÅ knappen. Om ovnen skal forlates over lengre

tid, trekk ut støpselet

Se gur 6 på separat gurark

Timerfunksjon

Timerfunksjonen vil skru av ovnen etter at det ønskede antaII timer har passert.

Se gur 7 på separat gurark

Dag- og nattsenking

Når du programmerer ovnen for enten dag- eller nattsenking, så vil senkeperioden

være aktiv fra det tidspunktet du programmerer ovnen. Det vil si at om du ønsker at

en dagsenking begynner kl 07.30, så må du programmere dagsenkingen kl 07.30.

Du trenger kun å programmere ovnen 1 gang for dagsenking og 1 gang for

nattsenking. Om du har programmert ovnen vil programmene være aktiv på

følgende dager:

Dagsenking: Mandag-Fredag (dag 1-5)

Nattsenking: Alle netter

EKSEMPEL:

La oss si at du ønsker å programmere ovnen for både dag- og nattsenking (normalt

står ovnen eksempelvis på 23 grader). Du ønsker at den skal gjøre følgende:

1. Dagsenk skal være aktiv fra kl 07.30 til kl 14.30. Ønsket temperatur: 17 grader

2. Nattsenk skal være aktiv fra kl 22.00 til 06.00. Ønsket temperatur: 18 grader

Sidan laddas ...

MILL Oil Premium AB-H1500DN Assembly And Instruction Manual

Denna manual är också lämplig för

MILL Oil Premium AB-H1500DN Assembly And Instruction Manual

på andra språk

Relaterade papper

Andra dokument