Ohlins BM634 Mounting Instruction

Typ
Mounting Instruction
MOUNTING INSTRUCTION
Brand
BMW
Model
R 850 / 1100 R FRONT
Year
95-96
Art. No.
BM 634
Total length
327
mm
Stroke
78
mm
Reb.click
18
Comp.click
--
Preload
10
mm
Supplementary parts
192-01
710-02
1180-01
Dekal / Sticker (2x)
C-Spanner / Haknyckel
Memo sticker / Memodekal
Owners manual / Bruksanvisning
Mounting instructions
1. Ställ MC:n på centralstödet så att framhjulet
hänger fritt.
2. Tag av sadeln, lossa plastpanelerna runt
bensintanken och lossa även tanken. Tanken
behöver bara flyttas bakåt så att man kommer åt
den övre stötdämparinfästningen.
3. Lossa den övre fästmuttern. Lossa nedre fästet
och tag bort standarddämparen.
4. Flytta över monteringsgummin och hylsa till
övre fästet. Lossa signalhornet liter att lättare
få Öhlindämparen på plats. Montera den nedre
fästskruven och därefter den övre.
5. Kontrollera att alla skruvar är åtdragna och
montera tillbaka tank, plastpaneler och sadel.
1. Put the motorcycle on the center stand so that
the front wheel is off the ground.
2. Remove the seat. Loosen the plastic panels
around the gas tank. Loosen the gas tank and
move it rearwards so that the the upper shock
mounting is within reach.
3. Loosen the upper shock mounting. Loosen the
lower mounting bolt and remove the shock
absorber.
4. Use the standard upper mounting rubbers and
sleeve for the Öhlins shock also. Loosen the horn
to get enough clearance for mounting the Öhlins
shock absorber. Mount the lower mounting bolt
and after that the upper mounting nut.
5. Check that all screws are tightened and taht
there are no clearance problems when the wheel
is moving. Mount gas tank, plastic panels and
seat.
Öhlins Racin
g
AB frånsä
g
er si
g
allt ansvar för
skada på stötdämpare, motorc
y
kel eller person om
inte monterin
g
s- och skötsel instruktionerna har
föl
j
ts till fullo. In
g
en
g
aranti kan
g
es på funktion
eller livslängd om dessa instruktioner inte följts
Öhlins Racin
g
AB can not be responsible for an
y
dama
g
e to shock absorber, motorc
y
cle or person if
the mountin
g
- and maintainin
g
instructions are not
followed exactl
y
. Also no
g
uarantee can be
g
iven
for the performance and reliabilit
y
if these
instructions are not followed.
  • Page 1 1

Ohlins BM634 Mounting Instruction

Typ
Mounting Instruction

på andra språk