7
English
Listening to FM radio
1. Select FM by pressing the[ MODE ] button.
2. To activate auto scan, press and hold in the[ VOLUME/SCROLL/OK ►ll ] control.
The scan stops when astation has been found. The display will show
3. To activate manual scan, press the[ VOLUME/SCROLL/OK ►ll ] control and when
thedisplay shows “TUNING”, turn the[ VOLUME/SCROLL/OK ►ll ] control until
you get thebest reception.
Saving and returning to saved stations
Up to 10 stations can be preset in both DAB and FM mode, this will enable you to
access your favourite stations more quickly.
1. To save apreset station, first tune into
thedesired frequency and then press and
hold in [ MEMORY ] until thedisplay shows
“Save to P#” and flashes.
2. Turn the[ VOLUME/SCROLL/OK ►ll ] control
to select your desired station preset number.
3. Press [ VOLUME/SCROLL/OK ►ll ] to
confirm your selection.
4. To go to asaved station, press [ MEMORY ]
and turn the[ VOLUME/SCROLL/OK ►ll ]
control to browse through your presets until
you find thedesired station. If thepreset
has not been allocated aspecific number,
thedisplay will show “Empty preset”.
The reset feature
If you take your radio to another part of thecountry, your preset stations might no
longer be available. If this is thecase, you should reset theradio to its factory settings.
1. Connect theradio to awall socket and press [
] to switch theradio on.
2. Press and hold in [ l◄◄/MENU ]. “Press Select to confirm reset” appears on
thedisplay.
3. Release the[ l◄◄/MENU ] button and press the[ VOLUME/SCROLL/OK ►ll ]
control once. The display will show “Restarting...”, and theradio will enter standby
mode once thereset is completed.
4. Press [ ] to switch theradio back on again.
NOTE: All of your saved DAB and FM presets will be lost once thereset has taken place.