Sony CDX-4170R Användarmanual

varumärke: Sony

Modell: CDX-4170R

Kategori: Mottagare för bilmedia

Typ: Användarmanual

Operating Instructions

Manual de instrucciones

Manual de instruções

Bruksanvisning

3-861-518-11 (1)

 1998 by Sony Corporation

FM/MW/LW

Compact Disc

Player

CDX-4170R

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiónes, consulte el manual

de instalación/conexiones suministrado.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features by using an optional rotary

commander (RM-X4S).

Table of Contents

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 5

Detaching the front panel .................................. 5

Setting the clock .................................................. 6

CD Player

Listening to a CD ................................................ 6

Playing a CD in various modes ........................ 7

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................... 8

Memorising only the desired stations.............. 8

Receiving the memorised stations .................... 9

RDS

Overview of the RDS function .......................... 9

Displaying the station name.............................. 9

Re-tuning the same programme automatically

— Alternative Frequencies (AF) ................ 10

Listening to traffic announcements ................ 11

Presetting RDS stations with the AF and TA

data ................................................................ 12

Locating a station by programme type .......... 12

Setting the clock automatically ....................... 13

Other Functions

Using the rotary commander .......................... 14

Adjusting the sound characteristics ............... 15

Attenuating the sound ..................................... 15

Changing the sound and beep tone ............... 16

Additional Information

Precautions......................................................... 16

Maintenance....................................................... 17

Dismounting the unit ....................................... 18

Attaching the label to the rotary commander 18

Specifications ..................................................... 19

Troubleshooting guide ..................................... 20

!™ (+) (–) (volume/bass/treble/balance/

fader control) buttons 6, 15

!£ ATT button 15

!¢ Reset button (located on the front side

of the unit hidden by the front panel) 5

!∞ OFF button 5, 6

!§ POWER SELECT switch (located on the

bottom of the unit)

See “POWER SELECT Switch” in the

Installation/Connections manual.

!¶ During radio reception:

Number buttons 8, 9, 10, 12

During CD playback:

(1) INTRO button 7

(2) REPEAT button 7

(3) SHUF button 7

!• D-BASS dial 16

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) button 7, 8, 9,

10, 13

2 SOURCE (source select) button 6, 8

3 MODE (band select) button 8

4 SEL (control mode select) button

6, 11, 13, 15, 16

5 SENS/BTM (sensitivity adjust/Best

tuning memory) button 8, 9, 12

6 DSPL (display mode change/time set)

button 6, 9

7 Display window

8 PTY (programme type) button 13

9 6 (eject) button 6

!º AF/TA (alternative frequency/traffic

announcement) button 10, 11, 12

!¡ RELEASE (front panel release) button 5,

Location of controls

SOURCE

MODE

RELEASE

ATT

INTRO REPEAT SHUF

2345

D-BASS

PTY

AF/TA

OFF

SEEK

AMS

DSPL

SEL

SENS/BTM

OFF

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ballpoint pen.

Notes

• Pressing the reset button will erase all the

memorized programme and memory functions.

• When you connect the power supply cord to the

unit or reset the unit, wait for about 10 seconds

before you insert a disc. Do not insert a disc

within these 10 seconds; otherwise, the unit will

not be reset, and you will have to press the reset

button again.

Detaching the front panel

You can detach the front panel of this unit to

prevent the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE) to open up the front

panel. Then slide the front panel a little

to the left, and pull it off towards you.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you press (RELEASE) to detach the panel while

the unit is still on, the unit will turn off

automatically to prevent the speakers from

being damaged.

• When you carry the front panel with you, put it

in the supplied front panel case.

Attaching the front panel

Align part A of the front panel to part B of

the unit as illustrated, and push until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel hard against the

unit when attaching it. Press it lightly against the

unit.

• Do not press hard or put excessive pressure on

the display window of the front panel.

• Do not expose the front panel to direct sunlight,

heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds

(only when the POWER SELECT switch is set

to the A position, and connecting an optional

power amplifier to LINE OUT).

Reset button

(OFF)

(RELEASE)

Getting Started

CD Player

Listening to a CD

Simply insert the CD.

Playback starts automatically.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears.

Note

To play back an 8 cm CD, use the optional Sony

compact disc single adapter (CSA-8).

To Press

Stop playback 6 or (OFF)

Eject the CD 6

Changing the displayed items

Each time you press (DSPL), the item changes

as follows:

Track number ˜ Clock

Labelled side up

Elapsed playing time

Track number

to go forward

to go back

to go forward

to go back

Setting the clock

The clock has a 24-hour digital indication.

Example: Set the clock to 10:08

1 Press (OFF) or (DSPL) during operation.

2 Press (DSPL) for more than two seconds.

The hour digit flashes.

1 Set the hour digits.

2 Press (SEL) momentarily.

The minute digits flash.

3 Set the minute digits.

3 Press (DSPL) momentarily.

The clock is activated.

Note

If the POWER SELECT switch on the bottom of the

unit is set to the B position, the clock cannot be

set unless the power is turned on. Set the clock

after you have turned on the radio, or started CD

playback.

100



1000



1000



1008



1008



5 215

TRACK

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS) for two seconds.

Release the button when you have

found the desired point.

Note

If “

” or “ ” appears in the

display, you have reached the beginning or the

end of the disc and you cannot go any further.

SEEK

AMS

To search forward

To search backward

Getting Started/CD Player

To locate succeeding tracks

To locate preceding tracks

SEEK

AMS

Playing a CD in various

modes

Searching for the desired track

— Intro Scan

Press (1) during playback.

“INTRO” appears in the display.

The first 10 seconds of all the tracks are played.

When you find the desired track, press again.

The unit returns to the normal playback mode.

Playing tracks repeatedly

— Repeat Play

Press (2) during playback.

“REP” appears in the display.

When the currently played track is over, it will

be played again from the beginning.

To cancel this mode, press again.

Playing tracks in random order

— Shuffle Play

Press (3) during playback.

“SHUF” appears in the display.

All tracks on the CD are played in random

order.

To cancel this mode, press again.

Memorising only the

desired stations

You can store up to 6 stations on each band (18

for FM1, FM2 and FM3, 6 for each MW and

LW) in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on

the number button.

4 Press the desired number button ((1) to

(6)) for two seconds until “MEM”

appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW and LW).

Caution

When tuning in a station while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

CD ˜ TUNER

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

” FM1 ” FM2 ” FM3 ” MW ” LW

3 Press (SENS/BTM) for two seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

Notes

• The unit does not store stations with weak

signals. If only a few stations are received, some

number buttons remain empty.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a CD is not in the unit, only the tuner band

appears even if you press (SOURCE).

Receiving the memorised

stations

1 Select the desired band (page 8).

2 Press the number button ((1) to (6))

momentarily where the desired station is

stored.

If you cannot tune in a preset

station

Press either side of (SEEK/AMS)

momentarily to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SENS/BTM) momentarily until “LCL” appears in

the display (local seek mode). Only the stations

with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want

to listen to, press and hold either side of

(SEEK/AMS) for two seconds until the desired

frequency appears (manual tuning).

If FM stereo reception is poor

— Monaural Mode

Press (SENS/BTM) momentarily until

“MONO” appears.

The sound improves, but becomes

monaural (“ST” disappears).

To go back to the normal mode, press again

until “MONO” disappears.

Changing the displayed items

Each time you press (DSPL), the items

alternate between the frequency and time.

RDS

Overview of the RDS

function

The Radio Data System (RDS) is a

broadcasting service that allows FM stations to

send additional digital information along with

the regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: re-tuning the same programme

automatically, listening to traffic

announcements and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned in to is

not transmitting RDS data.

Displaying the station

name

The name of the station currently received

lights up in the display.

Select an FM station (page 8).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Changing the displayed items

Each time you press (DSPL), the item changes

as follows:

” Frequency ” Clock ” Station Name

Note

“NO NAME” appears if the station received does

not transmit RDS data.

BBC 1 FM

FM1

Radio/RDS

Notes

• “NO AF” and the station name flash alternately,

if the unit cannot find an alternative station in

the network.

• If the station name starts flashing after selecting a

station with the AF function on, this indicates that

no alternative frequency is available. Press

(SEEK/AMS) while the station name is flashing

(within eight seconds). The unit starts searching

for another frequency with the same PI

(Programme Identification) data (“PI SEEK”

appears and no sound is heard). If the unit cannot

find another frequency, “NO PI” appears, and the

unit returns to the originally selected frequency.

Listening to a regional programme

The “REG” (regional on) function of this unit

lets you stay tuned to a regional programme

without being switched to another regional

station. (Note that you must turn the AF

function on.) The unit is factory preset to

“REG,” but if you want to turn off the

function, do the following.

Press (AF/TA) for more than two seconds

until “REG” disappears.

Note that turning the “REG” function off

might cause the unit to switch to another

regional station within the same network.

Note

This function does not work in the United

Kingdom and in some other areas.

Local link function (United

Kingdom only)

The Local Link function lets you select other

local stations in the area, even though they are

not stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Station

98.5MHz

102.5MHz

96.0MHz

Frequencies change automatically.

Re-tuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and re-tunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to re-tune the

station manually.

1 Select an FM station (page 8).

2 Press (AF/TA) repeatedly until “AF”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA” disappears.

Changing the displayed items

Each time you press (AF/TA), the item changes

as follows:

” AF ” TA ” AF TA*

Blank “

* Select this to turn on both the AF and TA functions.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even though you are

listening to other programme sources.

Press (AF/TA) repeatedly until “TA” or

“AF TA” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. “TA” stops flashing when the

traffic announcement is over.

Tips

• If you press (AF/TA) while tuning in the traffic

announcement, the unit can play a CD.

• If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

• “NO TP” flashes for five seconds if the received

station does not broadcast traffic

announcements. Then, the unit starts searching

for a station that broadcasts traffic

announcements.

• When “EON” appears with “TP” in the display,

the current station makes use of traffic

announcements broadcast by other stations in

the same network.

To cancel the current traffic

announcement

Press (AF/TA) momentarily.

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until “AF”

and “TA” disappear.

RDS

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (3) while pressing (SEL).

“TA VOL” appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will be automatically switched to the

announcement. If you are listening to a source

other than the radio, the emergency

announcements will be heard if you set AF or

TA to on. The unit will then automatically

switch to these announcements no matter what

you are listening to at the time.

Presetting RDS stations

with the AF and TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset stations, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 8).

2 Press (AF/TA) repeatedly to select either

“AF,” “TA” or “AF TA” (for both AF and

TA functions).

Note that turning the “AF TA” function off

stores RDS stations as well as non-RDS

stations.

3 Press (SENS/BTM) for two seconds.

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station (page 8).

2 Press (AF/TA) repeatedly to select either

“AF,” “TA” or “AF TA” (for both AF and

TA functions).

3 Press the desired number button for two

seconds until “MEM” appears.

Repeat from step 1 for presetting other

stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning on/off the AF or TA function.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Note

If the countries or regions where EON data is not

transmitted, you can use this function only for the

stations you have tuned in once before.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Varied VARIED

Popular Music POP M

Rock Music ROCK M

Middle of the Road Music M.O.R. M

Light Classical LIGHT M

Classical CLASSICS

Other Music Types OTHER M

Weather WEATHER

Finance FINANCE

Children’s programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

1 Press (PTY) during FM reception until

“PTY” appears.

The current programme type name appears

if the station is transmitting PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

2 Press (PTY) repeatedly until the desired

programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “NONE” (Not specified) for

searching.

3 Press either side of (SEEK/AMS).

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previous station.

INFO

SPORT

100

FM1

RDS

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

During FM reception, press (2) while

pressing (SEL).

“CT” is displayed, and the clock is set.

To cancel the CT function

Repeat the above procedure.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

By rotating the control (the SEEK/

AMS control)

Rotate the control momentarily and

release it to:

•Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

hold the control to tune in a specific

station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

Receive the stations memorised on the

number buttons.

Other Functions

You can connect an optional rotary

commander (RM-X4S) with this unit.

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons (the SOURCE

and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TUNER ˜ CD

Pressing (MODE) changes the operation

in the following ways;

Tuner: FM1 n FM2 n FM3 n MW n LW

Tip

When the POWER SELECT switch is set to position

B, you can turn on this unit by pressing (SOURCE)

on the rotary commander.

(SOURCE)

(MODE)

Adjusting the sound

characteristics

You can adjust the bass, treble, balance and

fader. Each source can store the bass and treble

level settings independently.

1 Select the item you want to adjust by

pressing (SEL) repeatedly.

VOL (volume) n BAS (bass) n

TRE (treble) n BAL (left–right) n

FAD (front–rear)

2 Adjust the selected item by pressing (+)

or (–).

Adjust within three seconds after selecting

the item. (After three seconds, the buttons

work as volume control buttons.)

Attenuating the sound

Press (ATT).

“ATT” flashes.

To restore the previous volume level, press

(ATT) again.

Other operations

Changing the operative direction

The operative direction of controls is factory-

set as in the illustration below.

If you need to mount the rotary commander on

the right side of the steering column, you can

reverse the operative direction.

Press (SEL) for two seconds while

pushing the VOL control.

Rotate the VOL control to

adjust the volume.

Press (ATT) to

attenuate the

sound.

Press (OFF) to turn

off the unit.

Press (SEL) to adjust and select.

To increase

To decrease

Press (DSPL) to change the

displayed items.

OFF

Other Functions

Changing the sound and

beep tone

Boosting bass sound — D-bass

You can enjoy clear and powerful bass sound.

The D-bass function boosts the low frequency

signal with a sharper curve than conventional

bass boost.

You can hear the bass line more clearly even if

the vocal sound is the same volume. You can

emphasize and adjust the bass sound easily

with the D-BASS dial. This effect is similar to

the one you get when you use an optional

subwoofer system.

Moreover, the Digital D-bass* function creates

even sharper and more powerful bass sound

than Analog D-bass.

* Digital D-bass is available during CD playback.

Adjusting the bass curve

Turn the D-BASS dial to adjust the bass

level (1, 2 or 3).

“D-BASS” appears in the display.

During CD playback, “DIGITAL D-BASS”

appears in the display.

To cancel, turn the dial to the OFF position.

Note

If the bass sound becomes distorted, adjust the

D-BASS dial or the volume control.

Attenuating the beep tone

Press (6) while pressing (SEL).

To obtain the beep tone again, press these

buttons again.

Note

When connecting an optional power amplifier to

the LINE OUT, the beep tone is disabled.

Digital D-BASS

0dB

D-BASS 3

D-BASS 2

D-BASS 1

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Level

Analog D-BASS

Level

Frequency (Hz) Frequency (Hz)

Additional

Information

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

•If your car is equipped with a power aerial,

note that it will extend automatically while

the unit is operating.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Notes on handling CDs

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc as follows.

Handle the disc by its edge. To keep the disc

clean, do not touch the surface.

Do not stick paper or tape on the labelled

surface.

Other Functions/Additional Information

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave

them in a car parked in direct sunlight where

there can be a considerable rise in the

temperature inside the car.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the centre

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners or antistatic

spray intended for analog discs.

Notes on moisture condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the CD player. Should this occur, the unit will

not operate properly. In this case, remove the

disc and wait for about an hour until the

moisture evaporates.

When you play 8 cm CDs

Use the optional Sony compact disc single

adapter (CSA-8) to protect the CD player from

being damaged.

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one

that matches the amperage described on the

fuse. If the fuse blows, check the power

connection and replace the fuse. If the fuse

blows again after replacement, there may be an

internal malfunction. In such a case, consult

your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. To prevent this, open the

front panel by pressing (RELEASE), then

detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Main unit

Back of the front panel

Fuse (10 A)

Dismounting the unit

Attaching the label to the

rotary commander

You can control this unit with the optional

rotary commander (RM-X4S).

Several labels are supplied with the rotary

commander. Attach the label that matches the

functions of this unit and the mounting

position of the rotary commander.

After you mount the rotary commander, attach

the label in the illustration below.

Release key

(supplied)

SEL

DSPL

MODE

SEL

DSPL

MODE

Specifications

CD player section

System Compact disc digital audio

system

Signal-to-noise ratio 90 dB

Frequency response 10 – 20,000 Hz

Wow and flutter Below measurable limit

Tuner section

Tuning range 87.5 – 108 MHz

Aerial terminal External aerial connector

Intermediate frequency 10.7 MHz

Usable sensitivity 8 dBf

Selectivity 75 dB at 400 kHz

Signal-to-noise ratio 60 dB (stereo),

65 dB (mono)

Harmonic distortion at 1 kHz

0.8 % (stereo),

0.5 % (mono)

Separation 35 dB at 1 kHz

Frequency response 30 – 15,000 Hz

Capture ratio 2 dB

MW/LW

Tuning range MW: 531 – 1,602 kHz

LW: 153 – 281 kHz

Aerial terminal External aerial connector

Intermediate frequency 10.71 MHz/450 kHz

Sensitivity MW: 30 µV

LW: 35 µV

Power amplifier section

Outputs Speaker outputs

(sure seal connectors)

Speaker impedance 4 – 8 ohms

Maximum power output 35 W × 4 (at 4 ohms)

General

Outputs Power aerial relay control

lead

Power amplifier control

lead

Tone controls Bass ±8 dB at 100 Hz

Treble ±8 dB at 10 kHz

Power requirements 12 V DC car battery

(negative ground)

Dimensions Approx. 188 × 58 × 175 mm

(w/h/d)

Mounting dimensions Approx. 183 × 53 × 160 mm

(w/h/d)

Mass Approx. 1.25 kg

Supplied accessories Parts for installation and

connections (1 set)

Front panel case (1)

Optional accessories Rotary commander

RM-X4S

RCA pin cord

RC-63 (1 m), RC-64 (2 m),

RC-65 (5 m)

Cleaning cloth XP-CD1

Compact disc single

adapter CSA-8

Design and specifications are subject to change

without notice.

Additional Information

Troubleshooting guide

Problem

No sound.

The contents of the memory

have been erased.

Indications do not appear in the

display.

No beep tone.

Cause/Solution

•Adjust the volume with (+).

•Set the fader control to the centre position for two-speaker

systems.

• The power cord or battery has been disconnected.

• The reset button has been pressed.

n Store the settings again into the memory.

Remove the front panel and clean the connectors. See “Cleaning

the connectors” (page 17) for details.

• An optional power amplifier is connected to the LINE OUT.

• The beep tone is attenuated (page 15).

CD playback

Cause/Solution

• Another CD is already loaded.

• The CD was forcibly inserted upside down.

Dusty disc.

The ambient temperature is more than 50 °C.

Press the reset button.

• The unit is installed at an angle of more than 60°.

• The unit is not installed in a sturdy part of the car.

Problem

CD cannot be loaded.

Play does not begin.

CD is automatically ejected.

The operation buttons do not

function.

The sound skips due to

vibration.

Radio reception

Problem

Preset tuning is not possible.

Automatic tuning is not

possible.

The “ST” indication flashes.

Cause/Solution

• Store the correct frequency.

• The broadcast signal is too weak.

The broadcast signal is too weak.

n Use manual tuning.

•Tune in the frequency correctly.

•The broadcast signal is too weak.

n Set to the MONO mode (page 9).

The following checklist will help you remedy the problems that you may encounter with your unit.

Before going through the checklist below, check the connection and operating procedures.

General

Sidan laddas ...

Sony CDX-4170R Användarmanual

varumärke: Sony

Modell: CDX-4170R

Kategori: Mottagare för bilmedia

Typ: Användarmanual

Ladda ner pdf

Rapportera

på andra språk

español: Sony CDX-4170R Manual de usuario
português: Sony CDX-4170R Manual do usuário
English: Sony CDX-4170R User manual

Relaterade papper

Andra dokument

Clarion DB248R Bruksanvisning