Sony CDX-3180 Användarmanual

Operating Instructions

Manual de instrucciones

Manual de instruções

Bruksanvisning

3-861-738-11 (1)

 1998 by Sony Corporation

EN

ES

S

P

FM/MW/LW

Compact Disc

Player

CDX-3180

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiónes, consulte el manual

de instalación/conexiones suministrado.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

2

EN

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features. You can use an optional rotary

commander (RM-X4S).

3

EN

Table of Contents

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 5

Detaching the front panel .................................. 5

Setting the clock .................................................. 6

CD Player

Listening to a CD ................................................ 6

Playing a CD in various modes ........................ 7

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM) ................... 7

Memorizing only the desired stations ............. 8

Receiving the memorized stations.................... 8

Other Functions

Using the rotary commander ............................ 9

Adjusting the sound characteristics ............... 10

Changing the sound and beep tone ............... 11

Turning on the clock display

— Power Select Function ............................ 11

Additional Information

Precautions ......................................................... 12

Maintenance ....................................................... 13

Dismounting the unit ....................................... 13

Attaching the label to

the rotary commander ................................ 14

Specifications ..................................................... 15

Troubleshooting guide ..................................... 16

4

EN

Location of controls

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) control 7, 8

2 MODE (band select) button 7, 8

3 SOURCE (source select) button 6, 7, 8

4 Dial (volume/bass/treble/left–right/

front–rear control) 6, 10

5 SOUND button 6, 10, 11

6 Display window

7 DSPL (display mode change/time set)

button 6, 8

8 6 (eject) button 6

9 BTM/SENS (Best Tuning Memory/

sensitivity adjust) button 7, 8

!º RELEASE (front panel release) button 5,

13

!¡ Reset button (located on the front side

of the unit hidden by the front panel) 5

!™ OFF button 5, 6

!£ During radio reception:

Number buttons 8

During CD playback:

(1) REPEAT button 7

(2) SHUF button 7

!¢ D-BASS dial 11

RELEASE

REPEAT

SEEK/AMS

SOUND

OFF

DSPL SENS

123456

D - BASS

OFF

1

2

3

MODE

SHUF

BTM

SOURCE

5

EN

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ballpoint pen.

Notes

• Pressing the reset button will erase all the

memorized program and memory functions.

• When you connect the power supply cord to the

unit or reset the unit, wait for about 10 seconds

before you insert a disc. Do not insert a disc

within these 10 seconds, otherwise, the unit will

not be reset, and you will have to press the reset

button again.

Detaching the front panel

You can detach the front panel of this unit to

prevent the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE) to open up the front

panel. Then slide the front panel a little

to the left, and pull it off towards you.

Reset button A

B

(OFF)

(RELEASE)

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you press (RELEASE) to detach the panel while

the unit is still on, the unit will turn off

automatically to prevent the speakers from

being damaged.

• When you carry the front panel with you, put it

in the supplied front panel case.

Attaching the front panel

Align part A of the front panel to part B of

the unit as illustrated, and push until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel hard against the

unit when attaching it. Press it lightly against the

unit.

• Do not press hard or put excessive pressure on

the display window of the front panel.

• Do not expose the front panel to direct sunlight,

heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds. If

you connect an optional power amplifier and

do not use the built-in amplifier, the beep tone

will be disabled.

Getting Started

6

EN

Labelled side up

Elapsed playing time

SOURCE

To go back

To go forward

To go back

SOURCE

Setting the clock

The clock has a 24-hour digital indication.

Example: Set the clock to 10:08

1 Press (OFF) or (DSPL) during operation.

If the POWER SELECT function is set to

“ON,” press (OFF). If it is set to “OFF,”

press (DSPL).

2 Press (DSPL) for two seconds.

The hour digit flashes.

1 Set the hour digits.

2 Press (SOUND) momentarily.

The minute digits flash.

3 Set the minute digits.

3 Press (DSPL) momentarily.

The clock is activated.

Note

If the car has no accessory position on the ignition

key switch, the clock cannot be set unless the

power is turn on. Set the clock after you have

turned on the radio, or started CD playback.

CD Player

Listening to a CD

Simply insert the CD.

Playback starts automatically.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears.

Note

To play back an 8 cm CD, use the optional Sony

compact disc single adapter (CSA-8).

To Press

Stop playback 6 or (OFF)

Eject the CD 6

Changing the displayed items

Each time you press (DSPL), the item changes

as follows:

z Elapsed playing time z Track number

Time Z

100

1000

1008

0215

MIN SEC

1008

7

EN

SEEK/AMS

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down momentarily.

Locating a specific point in a track

— Manual Search

During playback, push the SEEK/AMS

control up or down for two seconds.

Release when you have found the

desired point.

Note

If “

” or “ ” appears in the

display, you have reached the beginning or the

end of the disc and you cannot go any further.

Playing a CD in various

modes

Playing tracks repeatedly

— Repeat Play

Press (1) during playback.

“REP” appears in the display.

When the currently played track is over, it will

be played again from the beginning.

To cancel this mode, press again.

Playing tracks in random order

— Shuffle Play

Press (2) during playback.

“SHUF” appears in the display.

All tracks on the CD are played in random

order.

To cancel this mode, press again.

Getting Started/CD Player

To locate succeeding

tracks

To locate preceding

tracks

SEEK/AMS

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

This function selects from the currently

received band the stations with the strongest

signals and memorizes them in order of their

frequency.

PREVENTING ACCIDENTS!

When tuning in while driving, use the

automatic tuning instead of manual tuning.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the mode

changes as follows:

CD ˜ TUNER

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the mode

changes as follows:

” FM I ” FM II ” FM III

LW “ MW “

3 Press (BTM/SENS) for two seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

Notes

• The unit does not store stations with weak

signals. If only a few stations are received, some

number buttons remain empty.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a CD is not in the unit, only the tuner band

appears even if you press (SOURCE).

To search forward

To search backward

8

EN

Memorizing only the

desired stations

You can store up to 6 stations on each band (18

for FM I, FM II and FM III, 6 for each MW and

LW) in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Push the SEEK/AMS control up or down

to tune in the station that you want to

store on the number button.

4 Press the desired number button ((1) to

(6)) for two seconds until “MEM”

appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorized

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

momentarily where the desired station is

stored.

If you cannot tune in a preset

station

Push the SEEK/AMS control up or down

momentarily to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(BTM/SENS) momentarily until “LCL” appears in

the display (local seek mode). Only the stations

with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want

to listen to, push the SEEK/AMS control up or

down for two seconds until the desired frequency

appears (manual tuning).

If FM stereo reception is poor

— Monaural Mode

Press (BTM/SENS) momentarily until

“MONO” appears.

The sound improves, but becomes

monaural (“ST” disappears).

To go back to the normal mode, press again

until “MONO” disappears.

Changing the displayed items

Each time you press (DSPL), the items

alternate between the frequency and time.

9

EN

(SOURCE)

(MODE)

CD Player/Radio

Other Functions

You can connect an optional rotary

commander (RM-X4S) with this unit.

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons (the SOURCE

and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TUNER ˜ CD

Pressing (MODE) changes the operation

in the following ways;

Tuner : FM I n FM II n FM III n MW n LW

By rotating the control (the SEEK/

AMS control)

Rotate the control momentarily and

release it to:

•Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

hold the control to tune in a specific

station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

Receive the stations memorised on the

number buttons.

10

EN

To increase

To decrease

Press (DSPL) to change

the displayed items.

Rotate the VOL control to

adjust the volume.

Press (ATT) to

attenuate the

sound.

Press (OFF) to turn

off the unit.

OFF

Other operations

Changing the operative direction

The operative direction of controls is factory-

set as in the illustration below.

If you need to mount the rotary commander on

the right side of the steering column, you can

reverse the operative direction.

Press (SOUND) for two seconds while

pushing the VOL control.

Adjusting the sound

characteristics

You can adjust bass, treble, balance and fader.

Each source can store the bass and treble level

independently.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

VOL (volume) n BAS (bass) n TRE (treble)

n BAL (left–right) n FAD (front–rear)

2 Adjust the selected item by rotating the

dial.

Adjust within three seconds after selecting

the item. (After three seconds, the dial

functions as volume control.)

Press (SOUND) to adjust the

volume and sound menu.

11

EN

Digital D-BASS

Analog D-BASS

Level

0dB

D-BASS 3

D-BASS 2

D-BASS 1

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Frequency (Hz)Frequency (Hz)

Other Functions

Changing the sound and

beep tone

Boosting the bass sound — D.bass

You can enjoy clear and powerful bass sound.

The D-bass function boosts the low frequency

signal with a sharper curve than conventional

bass boost.

You can hear the bass line more clearly even if

the vocal sound is the same volume. You can

emphasize and adjust the bass sound easily

with the D-BASS dial. This effect is similar to

the one you get when you use an optional

subwoofer system.

Moreover, the Digital D-bass* function creates

even sharper and more powerful bass sound

than Analog D-bass.

* Digital D-bass is available during CD playback.

Adjusting the bass curve

Turn the D-BASS dial to adjust the bass

level (1, 2 or 3).

“D-BASS” appears in the display.

During CD playback, “DIGITAL D-BASS”

appears in the display.

To cancel, turn the dial to the OFF position.

Note

If the bass sound becomes distorted, adjust the D-

bass dial or volume control.

Attenuating the beep tone

Press (6) while pressing (SOUND).

To obtain the beep tone again, press these

buttons again.

Note

If you connect an optional power amplifier and do

not use the built-in amplifier, the beep tone will

be disabled.

Turning on the clock

display

— Power Select Function

Only for cars with an accessory position on the

ignition key switch

To turn the Power Select Function ON

Press (OFF) while pressing (SOUND).

The Power select Function ties the clock

display power to the accessory position on

the ignition key switch.

To avoid battery wear, the clock is not

displayed while the unit is initializing.

12

EN

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave

them in a car parked in direct sunlight where

there can be a considerable rise in the

temperature inside the car.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the centre

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners or antistatic

spray intended for analog discs.

Notes on moisture condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the CD player. Should this occur, the unit will

not operate properly. In this case, remove the

disc and wait for about an hour until the

moisture evaporates.

When you play 8 cm CDs

Use the optional Sony compact disc single

adapter (CSA-8) to protect the CD player from

being damaged.

Additional

Information

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

•If your car is equipped with a power aerial,

note that it will extend automatically while

the unit is operating.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Notes on handling CDs

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc as follows.

Handle the disc by its edge. To keep the disc

clean, do not touch the surface.

Do not stick paper or tape on the labeled

surface.

13

EN

Release key

(supplied)

Additional Information

Fuse (10 A)

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one

that matches the amperage described on the

fuse. If the fuse blows, check the power

connection and replace the fuse. If the fuse

blows again after replacement, there may be an

internal malfunction. In such a case, consult

your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. To prevent this, open the

front panel by pressing (RELEASE), then

detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Main unit

Back of the front panel

Dismounting the unit

µ

Pull the unit out while the release key is inserted.

µ

Press the clip inside the front cover with a thin

screwdriver, and lever the front cover free.

14

EN

Attaching the label to the

rotary commander

You can control this unit with the optional

rotary commander (RM-X4S).

Several labels are supplied with the rotary

commander. Attach the label that matches the

functions of this unit and the mounting

position of the rotary commander.

After you mount the rotary commander, attach

the label in the illustration below.

SOUND

DSPL

MODE

SOUND

DSPL

MODE

15

EN

General

Outputs Line outputs (2)

Power aerial relay control

lead

Power amplifier control

lead

Telephone ATT control

lead

Tone controls Bass ±10 dB at 100 Hz

Treble ±10 dB at 10 kHz

Power requirements 12 V DC car battery

(negative earth)

Dimensions Approx. 188 × 57 × 184.4

mm (w/h/d)

Mounting dimensions Approx. 183 × 53 × 163 mm

(w/h/d)

Mass Approx. 1.3 kg

Supplied accessories Parts for installation and

connections (1 set)

Front panel case (1)

Optional accessories Rotary commander

RM-X4S

RCA pin cord

RC-63 (1 m), RC-64 (2 m),

RC-65 (5 m)

Cleaning cloth XP-CD1

Compact disc single

adapter CSA-8

Design and specifications are subject to change

without notice.

Specifications

CD player section

System Compact disc digital

audio system

Signal-to-noise ratio 90 dB

Frequency response 10 – 20,000 Hz

Wow and flutter Below measurable limit

Tuner section

FM

Tuning range 87.5 – 108.0 MHz

Antenna terminal External aerial

connector

Intermediate frequency 10.7 MHz

Usable sensitivity 11 dBf

Selectivity 75 dB at 400 kHz

Signal-to-noise ratio 60 dB (stereo),

65 dB (mono)

Harmonic distortion at 1 kHz

1.0 % (stereo),

0.5 % (mono)

Separation 35 dB at 1 kHz

Frequency response 30 – 15,000 Hz

Capture ratio 2 dB

MW/LW

Tuning range MW: 531 – 1,602 kHz

LW: 153 – 281 kHz

Antenna terminal External aerial

connector

Intermediate frequency 10.71 MHz/450 kHz

Sensitivity MW: 30 µV

LW: 35 µV

Power amplifier section

Outputs Speaker outputs

(sure seal connectors)

Speaker impedance 4 – 8 ohms

Maximum power output 40 W × 4 (at 4 ohms)

Additional Information

16

EN

Problem

No sound.

The contents of the memory

have been erased.

Indications do not appear in the

display.

No beep tone.

Cause/Solution

•Rotate the dial in a clockwise direction to adjust the volume.

•Set the fader control to the centre position for two-speaker

systems.

• The power cord or battery has been disconnected.

• The reset button has been pressed.

n Store the settings again into the memory.

Remove the front panel and clean the connectors. See “Cleaning

the connectors” (page 13) for details.

• An optional power amplifier is connected and you are not

using the built-in amplifier.

• The beep tone is attenuated (page 11).

Cause/Solution

• Another CD is already loaded.

• The CD was forcibly inserted upside down.

Dusty disc.

The ambient temperature is more than 50°C.

Press 6 for two seconds.

Press the reset button.

• The unit is installed at an angle of more than 60°.

• The unit is not installed in a sturdy part of the car.

Problem

CD cannot be loaded.

Play does not begin.

CD is automatically ejected.

CD will not eject.

The operation buttons do not

function.

The sound skips due to

vibration.

CD playback

Problem

Preset tuning is not possible.

Automatic tuning is not

possible.

The “ST” indication flashes.

Cause/Solution

• Store the correct frequency.

• The broadcast signal is too weak.

The broadcast signal is too weak.

n Use manual tuning.

•Tune in the frequency correctly.

•The broadcast signal is too weak.

n Set to the MONO mode (page 8).

Radio reception

Troubleshooting guide

The following checklist will help you remedy the problems that you may encounter with your unit.

Before going through the checklist below, check the connection and operating procedures.

General

17

EN

Display

Solution

Clean or insert the CD correctly.

Press the reset button or 6.

Cause

A CD is dirty or inserted upside

down.

The CD player cannot be operated

because of some problem.

If the above-mentioned solutions do not help improve the situation, consult your nearest Sony

dealer.

Error displays

The following indications will flash for about five seconds.

Additional Information

ES

2

¡Bienvenido!

Enhorabuena por la adquisición del

reproductor de discos compactos Sony. Esta

unidad le permitirá disfrutar de una serie de

funciones. Podrá usar un mando a distancia

rotativo (RM-X4S) opcional.

ES

3

Indice

Ubicación de los controles ...................................... 4

Procedimientos iniciales

Restauración de la unidad ................................. 5

Extracción del panel frontal............................... 5

Ajuste del reloj..................................................... 6

Reproductor de discos

compactos

Reproducción de un CD..................................... 6

Reproducción de un CD en diversos modos .. 7

Radio

Memorización automática de emisoras

— Función de memorización de la mejor

sintonía (BTM) ................................................ 7

Memorización de las emisoras deseadas......... 8

Recepción de emisoras memorizadas .............. 8

Otras funciones

Uso del mando a distancia rotativo.................. 9

Ajuste de las características de sonido........... 10

Cambio de los ajustes de sonido y tono del

pitido ............................................................. 11

Activación de la indicación del reloj

— Función de selección de alimentación .... 11

Información complementaria

Precauciones ...................................................... 12

Mantenimiento .................................................. 13

Desmontaje de la unidad ................................. 13

Adhesión de la etiqueta al mando a distancia

rotativo .......................................................... 14

Especificaciones ................................................. 15

Guía de solución de problemas ...................... 16

ES

4

!º Botón RELEASE (extracción del panel

frontal) 5, 13

!¡ Botón de restauración (situado en la

parte frontal de la unidad, oculto por el

panel frontal) 5

!™ Botón OFF 5, 6

!£ Durante la recepción de radio:

Botones numéricos 8

Durante la reproducción de un CD:

(1) Botón REPEAT 7

(2) Botón SHUF 7

!¢ Dial D-BASS 11

Consulte las páginas indicadas para obtener más información.

1 Control SEEK/AMS (búsqueda/sensor de

música automático/búsqueda manual)

7, 8

2 Botón MODE (selección de banda) 7, 8

3 Botón SOURCE (selección de fuente)

6, 7, 8

4 Dial (control de volumen/graves/

agudos/izquierdo-derecho/delantero-

trasero) 6, 10

5 Botón SOUND 6, 10, 11

6 Visor

7 Botón DSPL (cambio de visualización/

ajuste de la hora) 6, 8

8 Botón 6 (expulsión) 6

9 Botón BTM/SENS (función de

memorización de la mejor sintonía/

ajuste de sensibilidad) 7, 8

Ubicación de los controles

RELEASE

REPEAT

SEEK/AMS

SOUND

OFF

DSPL SENS

123456

D - BASS

OFF

1

2

3

MODE

SHUF

BTM

SOURCE

Sidan laddas ...

Sony CDX-3180 Användarmanual

Sony CDX-3180 Användarmanual

på andra språk

Relaterade papper