Sony CDX-3250 Bruksanvisning

Operating Instructions

Manual de instrucciones

Manual de instruções

Bruksanvisning

3-865-880-11 (1)

 1998 by Sony Corporation

GB

ES

SE

PT

FM/MW/LW

Compact Disc

Player

CDX-3250

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiónes, consulte el manual

de instalación/conexiones suministrado.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

2

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features as well as an optional rotary

commander.

3

Table of Contents

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 5

Detaching the front panel .................................. 5

Setting the clock .................................................. 6

CD Player

Listening to a CD ................................................ 6

Playing a CD in various modes ........................ 7

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................... 7

Memorising only the desired stations.............. 8

Receiving the memorised stations .................... 8

Other Functions

Labelling the rotary commander ...................... 9

Using the rotary commander ............................ 9

Adjusting the sound characteristics ............... 11

Attenuating the sound ..................................... 11

Changing the sound and beep sound ............ 11

Turning on the clock display

— Power Select Function ............................ 12

Additional Information

Precautions......................................................... 12

Maintenance....................................................... 13

Dismounting the unit ....................................... 14

Specifications ..................................................... 15

Troubleshooting guide ..................................... 16

4

Location of controls

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) control 7, 8

2 MODE (band select) button 7, 8

3 SOURCE (source select) button 6, 7, 8

4 Dial (volume/bass/treble/left–right/

front–rear control) 6, 11

5 SOUND button 6, 11, 12

6 Display window

7 SENS/BTM (sensitivity adjust/Best

Tuning Memory) button 7, 8

8 6 (eject) button 6

9 DSPL (display mode change/time set)

button 6, 8

!º RELEASE (front panel release) button

5, 13

!¡ Reset button (located on the front side

of the unit behind the front panel) 5

!™ OFF button 5, 6

!£ During radio reception:

Number buttons 8

During CD playback:

(1) REPEAT button 7

(2) SHUF button 7

!¢ D-BASS control 11

REPEAT

SEEK/AMS

SOUND

OFF

SENS DSPL

123456

D - BASS

MODE

SHUF

BTM

SOURCE

CDX-3250

RELEASE

OFF

1

2

3

5

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Notes

• Pressing the reset button will erase the clock

setting and some memorised functions.

• When you connect the power supply cord to the

unit or reset the unit, wait for about 10 seconds

before you insert a disc. If you insert a disc within

these 10 seconds, the unit will not be reset, and

you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Reset button

(OFF)

(RELEASE)

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

Attaching the front panel

Attach part a of the front panel to part b of

the unit as illustrated and push until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional power amplifier

and do not use the built-in amplifier, the beep

tone will be deactivated.

a

b

6

Setting the clock

The clock has a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (DSPL) during operation.

If the POWER SELECT function is set to

“ON,” go to step 2. If it is set to “OFF,” set

to “ON” (page 12).

2 Press (DSPL) for two seconds.

The hour digit flashes.

1 Set the hour.

2 Press (SOUND).

The minute indication flashes.

3 Set the minute.

3 Press (DSPL).

The clock starts.

Note

If the car has no accessory position on the ignition

key switch, the clock cannot be set unless the

power is turn on. Set the clock after you have

turned on the radio, or started CD playback.

Labelled side up

Elapsed playing time

To go forward

To go backward

To go forward

To go backward

CD Player

Listening to a CD

Insert the CD.

Playback starts automatically.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears to start

playback.

Note

To play back an 8 cm CD, use the optional Sony

compact disc single adapter (CSA-8).

To Press

Stop playback 6 or (OFF)

Eject the CD 6

Changing the displayed item

Each time you press (DSPL) during CD

playback, the item changes as follows:

z Elapsed playing time z Track number

MOTION DISPLAY* Z Clock Z

* All the above items are scrolled the display one

by one in order.

SOURCE

7

SEEK/AMS

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down momentarily.

Locating a specific point in a track

— Manual Search

During playback, push the SEEK/AMS

control up or down for two seconds.

Release when you have found the

desired point.

Note

If “

” or “ ” appears in the

display, you have reached the beginning or the

end of the disc and you cannot go any further.

Playing a CD in various

modes

Playing tracks repeatedly

— Repeat Play

Press (1) during playback.

“REP” appears in the display.

When the currently played track is over, it will

be played again from the beginning.

To return to normal playback mode, press

again.

Playing tracks in random order

— Shuffle Play

Press (2) during playback.

“SHUF” appears in the display.

All tracks on the CD are played in random

order.

To return to normal playback mode, press

again.

To locate succeeding tracks

To locate preceding tracks

SEEK/AMS

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

This unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 6 stations

on each band (FM I, FM II, FM III, MW, and

LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

TUNER ˜ CD

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

” FM I ” FM II ” FM III

LW “ MW “

3 Press (SENS/BTM) for two seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a CD is not in the unit, only the tuner band

appears even if you press (SOURCE).

To search forward

To search backward

8

Memorising only the

desired stations

You can preset up to 18 FM stations (6 each for

FM I, FM II and FM III), up to 6 MW stations,

and up to 6 LW stations in the order of your

choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Push the SEEK/AMS control up or down

to tune in the station that you want to

store on the number button.

4 Press and hold the desired number

button ((1) to (6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

If you cannot tune in a preset

station

Push and release the SEEK/AMS control

up or down to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SENS/BTM) repeatedly until “LCL” (local seek

mode) is displayed. Only the stations with

relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want

to listen to push the SEEK/AMS control up or down

and hold until the desired frequency appears

(manual tuning).

If FM stereo reception is poor

— Monaural Mode

Press (SENS/BTM) repeatedly until

“MONO” appears.

The sound improves, but becomes

monaural (“ST” disappears).

To return to normal mode, press again until

“MONO” disappears.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

z Frequency z Clock

MOTION DISPLAY* Z

* All the above items are scrolled in the display

one by one in order.

9

Other Functions

You can also control this unit with an optional

rotary commander.

Labelling the rotary

commander

Depending on how you mount the rotary

commander, attach the appropriate label as

shown in the illustration below.

(SOURCE)

(MODE)

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

(the SOURCE and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TUNER ˜ CD

Pressing (MODE) changes the operation

in the following ways;

Tuner : FM I n FM II n FM III n MW n LW

SOUND

LIST

MODE

SOUND

LIST

MODE

10

To increase

To decrease

Press (DSPL) to change

the displayed items.

Rotate the VOL control to

adjust the volume.

Press (ATT) to

attenuate the

sound.

Press (OFF) to turn

off the unit.

Other operations

Changing the operative direction

The operative direction of controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SOUND) for two seconds while

pushing the VOL control.

Press (SOUND) to adjust the

volume and sound menu.

OFF

By rotating the control

(the SEEK/AMS control)

Rotate the control momentarily and

release it to:

•Locate a specific track on a disc. Rotate

and hold the control until you locate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

hold the control to find a specific station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

Receive the stations memorised on the

number buttons.

11

Changing the sound and

beep sound

Boosting the bass sound — D-bass

You can enjoy a clear and powerful bass

sound.

The D-bass function boosts the low frequency

signal with a sharper curve than conventional

bass boost.

You can hear the bass line more clearly even

while the vocal volume remains the same. You

can emphasise and adjust the bass sound

easily with the D-BASS control.

Adjusting the bass curve

Turn the D-BASS control to adjust the

bass level (1, 2, or 3).

“D-BASS” appears in the display.

To cancel, turn the control to OFF.

Note

If the bass sound becomes distorted, adjust the

D-BASS control or volume.

Attenuating the beep sound

Press (6) while pressing (SOUND).

To obtain the beep sound again, press these

buttons again.

Note

If you connect an optional power amplifier and do

not use the built-in amplifier, the beep sound will

be disabled.

Level

Frequency (Hz)

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, and

fader. You can store the bass and treble levels

independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

VOL (volume) n BAS (bass) n TRE (treble)

n BAL (left–right) n FAD (front–rear)

2 Adjust the selected item by rotating the

dial.

Adjust within three seconds after selecting

the item. (After three seconds, the dial

function reverts to volume control.)

Attenuating the sound

Press (ATT) on the optional rotary

commander.

“ATT-ON” flashes momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

The unit decreases the volume automatically when

a telephone call comes in (Telephone ATT

function).

12

Additional

Information

Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

•If your car is equipped with a power aerial, it

will extend automatically while the unit is

operating.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Notes on handling CDs

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc by its edge.

To keep the disc clean, do not touch the

surface.

Do not stick paper or tape on the labelled

surface.

Turning on the clock

display

— Power Select Function

Only for cars with an accessory position on the

ignition key switch

To turn the Power Select Function ON

Press (OFF) while pressing (SOUND).

The Power select Function ties the clock

display power to the accessory position on

the ignition key switch.

To avoid battery wear, the clock is not

displayed while the unit is initializing.

13

Fuse (10 A)

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave

them in a car parked in direct sunlight where

there can be a considerable rise in temperature

inside the car.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the centre

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic

spray intended for analog discs.

Notes on moisture condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the CD player. Should this occur, the unit will

not operate properly. In this case, remove the

disc and wait for about an hour until the

moisture evaporates.

When you play 8 cm CDs

Use the optional Sony compact disc single

adapter (CSA-8) to protect the CD player from

damaged.

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one

matching the amperage rating stated on the

original fuse. If the fuse blows, check the

power connection and replace the fuse. If the

fuse blows again after replacement, there may

be an internal malfunction. In such a case,

consult your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. In order to prevent this,

open the front panel by pressing (RELEASE),

then detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Main unit

Back of the front panel

Notes

• For safety, turn off the engine before cleaning

the connectors and remove the key from the

ignition switch.

• Never touch the connectors directly with your

fingers or any metal device.

14

Release key

(supplied)

Dismounting the unit

µ

Pull the unit out while the release key is inserted.

15

CD player section

System Compact disc digital audio

system

Signal-to-noise ratio 90 dB

Frequency response 10 – 20,000 Hz

Wow and flutter Below measurable limit

Tuner section

FM

Tuning range 87.5 – 108.0 MHz

Antenna terminal External aerial connector

Intermediate frequency 10.7 MHz

Usable sensitivity 12 dBf

Selectivity 75 dB at 400 kHz

Signal-to-noise ratio 65 dB (stereo),

68 dB (mono)

Harmonic distortion at 1 kHz

0.8 % (stereo),

0.6 % (mono)

Separation 35 dB at 1 kHz

Frequency response 30 – 15,000 Hz

MW/LW

Tuning range MW: 531 – 1,602 kHz

LW: 153 – 281 kHz

Antenna terminal External aerial connector

Intermediate frequency 10.71 MHz/450 kHz

Sensitivity MW: 30 µV

LW: 50 µV

Power amplifier section

Outputs Speaker outputs

(sure seal connectors)

Speaker impedance 4 – 8 ohms

Maximum power output 35 W × 4 (at 4 ohms)

Specifications

General

Outputs Line outputs (2)

Power aerial relay control

lead

Power amplifier control

lead

Telephone ATT control

lead

Tone controls Bass ±8 dB at 100 Hz

Treble ±8 dB at 10 kHz

Power requirements 12 V DC car battery

(negative earth)

Dimensions Approx. 178 × 50 × 185 mm

(w/h/d)

Mounting dimensions Approx. 182 × 53 × 162 mm

(w/h/d)

Mass Approx. 1.2 kg

Supplied accessories Parts for installation and

connections (1 set)

Front panel case (1)

Optional accessories Rotary commander

RM-X4S

Cleaning cloth XP-CD1

Compact disc single

adapter CSA-8

Design and specifications are subject to change

without notice.

16

Problem

No sound.

The contents of the memory

have been erased.

Indications do not appear in the

display.

No beep sound.

Cause/Solution

•Cancel the ATT function.

•Set the fader control to the centre position for two-speaker

systems.

•Rotate the dial in a clockwise direction to adjust the volume.

• The power cord or battery has been disconnected.

• The reset button has been pressed.

n Store again into the memory.

Remove the front panel and clean the connectors. See

“Cleaning the connectors” (page 13) for details.

• An optional power amplifier is connected and you are not

using the built-in amplifier.

• The beep sound is attenuated (page 11).

Cause/Solution

• Another CD is already loaded.

• The CD was forcibly inserted upside down.

Dirty disc.

The ambient temperature exceeds 50°C.

Press 6 for two seconds.

Press the reset button.

• The unit is installed at an angle of more than 60°.

• The unit is not installed in a sturdy part of the car.

Problem

CD cannot be loaded.

Playback does not begin.

CD is automatically ejected.

CD will not eject.

The operation buttons do not

function.

The sound skips due to

vibration.

CD playback

Problem

Preset tuning is not possible.

Automatic tuning is not

possible.

The “ST” indication flashes.

Cause/Solution

• Memorise the correct frequency.

• The broadcast signal is too weak.

The broadcast signal is too weak.

n Use manual tuning.

•Tune in the frequency accurately.

•The broadcast signal is too weak.

n Set to the MONO mode (page 8).

Radio reception

Troubleshooting guide

The following checklist will help you remedy the problems you may encounter with your unit.

Before going through the checklist below, check the connection and operating procedures.

General

17

Display

Solution

Clean or insert the CD correctly.

Press the reset button or 6.

Cause

A CD is dirty or inserted upside

down.

The CD player cannot be operated

because of some problem.

If the above-mentioned solutions do not help improve the situation, consult your nearest Sony

dealer.

Error displays

The following indications will flash for about five seconds.

2

¡Bienvenido!

Gracias por adquirir este reproductor de discos

compactos de Sony. Esta unidad le permitirá

disfrutar de una serie de funciones, así como

de un mando rotativo opcional.

3

Indice

Ubicación de los controles ................................. 4

Procedimientos iniciales

Restauración de la unidad ................................. 5

Extracción del panel frontal............................... 5

Ajuste del reloj ..................................................... 6

Reproductor de discos

compactos

Reproducción de un CD..................................... 6

Reproducción de un CD en diversos

modos .............................................................. 7

Radio

Memorización automática de emisoras

— Función de memorización de la mejor

sintonía (BTM)................................................ 7

Memorización de las emisoras deseadas ......... 8

Recepción de emisoras memorizadas .............. 8

Otras funciones

Adhesión de la etiqueta al mando rotativo ..... 9

Uso del mando rotativo ..................................... 9

Ajuste de las características de sonido ........... 11

Atenuación del sonido ..................................... 11

Cambio del sonido y de los pitidos ................ 11

Activación de la indicación del reloj

— Función de selección de

alimentación ................................................. 12

Información complementaria

Precauciones ...................................................... 12

Mantenimiento .................................................. 13

Desmontaje de la unidad ................................. 14

Especificaciones................................................. 15

Guía de solución de problemas ...................... 16

4

9 Botón DSPL (cambio de visualización/

ajuste de la hora) 6, 8

!º Botón RELEASE (extracción del panel

frontal) 5, 13

!¡ Botón de restauración (situado en la

parte frontal de la unidad, detrás del

panel frontal) 5

!™ Botón OFF 5, 6

!£ Durante la recepción de radio:

Botones numéricos 8

Durante la reproducción de un CD:

(1) Botón REPEAT 7

(2) Botón SHUF 7

!¢ Control D-BASS 11

Consulte las páginas indicadas para obtener más información.

1 Control SEEK/AMS (búsqueda/sensor de

música automático/búsqueda manual)

7, 8

2 Botón MODE (selección de banda) 7, 8

3 Botón SOURCE (selección de fuente)

6, 7, 8

4 Dial (control de volumen/graves/

agudos/izquierdo-derecho/delantero-

trasero) 6, 11

5 Botón SOUND 6, 11, 12

6 Visor

7 Botón SENS/BTM (ajuste de sensibilidad/

función de memorización de la mejor

sintonía) 7, 8

8 Botón 6 (expulsión) 6

Ubicación de los controles

REPEAT

SEEK/AMS

SOUND

OFF

SENS DSPL

123456

D - BASS

MODE

SHUF

BTM

SOURCE

CDX-3250

RELEASE

OFF

1

2

3

Sidan laddas ...

Sony CDX-3250 Bruksanvisning

Sony CDX-3250 Bruksanvisning

på andra språk

Relaterade papper