9 GB
Note: The product has two viewing sides. One side
is the normal mirror on the main body 3 and on the
other side there is the mirror with 5x magnification =
cover 4.
Installation
Place the round base 2 on a soft underlay to
avoid scratch on the surface.
Fix the mirror assembly 1 onto the round
base 2. Turn it clockwise until it is tightened
(see Fig. A).
Inserting / replacing batteries
Rotate the mirror side with 5 x magnification
counter clockwise and remove the cover 4
(see Fig. B).
Remove the battery cover 8 inside the main
body 3 and insert the batteries. Please note
the correct polarity, which is displayed in the
battery compartment 9 (see Fig. C).
Close the battery cover 8 and replace the
cover 4 after inserting / changing the batteries
by turning it clockwise (see Fig. B) until both
triangle marks on the main body 3 and on
cover 4 are aligned (see Fig. D).
Note: When reapplying the cover 4, make
sure the cover
4
is positioned with the 3 pro-
truded dot marks on the cover
4
inserting to
the 3 grooves on the main body
3
before
rotating the cover
4
(see Fig. E).
Note: The position of the 3 pairs of the pro-
truded dot mark and the groove as well as the
lock and unlock marks should be same as Fig.
E, while the position of the pair of the triangle
mark should be same as Fig. D
.
Use
Note: The product is only suitable as a mirror with
normal or 5x magnification.
It is NOT intended to
be used
as table lamp for household room illumina-
tion.
Switch the switch 5 to the position “I” to
switch on or to the position “0” to switch off
(see Fig. C).
To select the regular plane mirror or 5 x magni-
fication mirror, rotate the main body 3 to the
desired side around the mirror pivot 6.
Note: Five times magnification
Cleaning and care
Before cleaning, switch off the product and
remove the batteries.
Never use liquids or detergents, as these will
damage the product.
Clean the product on the outside only with a
soft, dry cloth.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal au-
thority for more details of how to dispose
of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information