Pioneer N-50AE Användarmanual

English Français Español

Italiano Deutsch Nederlands

Language select / Sélection de la langue / Selección de idioma / Selezione lingua /

Sprachauswahl / Taal selecteren / Välj språk

N-70AE

N-50AE

Svenska

E

N

Before Start

What's in the box .................................................................... 2

Part Names

Front Panel (N-70AE) ............................................................. 3

Front Panel (N-50AE) ............................................................. 4

Rear Panel (N-70AE) .............................................................. 5

Rear Panel (N-50AE) .............................................................. 6

Remote Controller .................................................................. 7

Display .................................................................................... 8

Install

Connections with an amplifier ................................................. 9

Connecting the power cord, etc. ............................................11

Initial Setup

Power On & Initial Setup ...................................................... 12

Playback

USB Storage Device/HDD .................................................... 14

Internet Radio ....................................................................... 16

Spotify ................................................................................... 17

AirPlay

®

................................................................................ 18

Music Server ......................................................................... 19

Using a computer to save and delete the music on a USB HDD

connected to this unit ............................................................ 21

Using this unit as a D/A converter ........................................ 22

Adjusting sound quality ......................................................... 24

Entering text ......................................................................... 25

Supplementary information

Supplementary information for player functions .................... 26

Advanced Setup

Advanced Settings................................................................. 27

Firmware Update .................................................................. 30

Others

Troubleshooting .................................................................... 32

General Specifications .......................................................... 34

License and Trademark Information ..................................... 35

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

NETWORK AUDIO PLAYER

N-70AE

N-50AE

Instruction

Manual

2

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

What's in the box

Before Start

0 The power cord must be connected only after all other cable connections are completed.

0 We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0 Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in

the future.

0 Specifications and appearance are subject to change without prior notice.

The main power cannot be turned on or off with the remote controller. Use the Í/I

STANDBY/ON button on the main unit.

Main unit (1) (N-70AE is used in the illustrations)

Remote controller (RC-931S) (1), Batteries (AAA/R03) (2)

Analog Audio Cable (1)

Power Cord (1)

≥ N-70AE only

Wireless antenna (2)

0 Quick Start Guide (1)

0 This document is an online instruction manual. It is not included as an accessory.

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

3

E

N

Front Panel (N-70AE)

Part Names

1. Í/I STANDBY/ON button/indicator: Switch the main power of the unit on and off. While

the unit is starting up, the indicator in the center of the button slowly flashes blue, then

lights blue when it has started.

2. STANDBY indicator: Lights red when the unit is in standby mode.

3. DIRECT indicator: Lights when the DIRECT mode is on. (P24)

4. Hi-Bit32 indicator: Lights when the Hi-Bit32 feature is on. (P24)

5. Up Sampling indicator: Lights when the Up Sampling feature is on. (P24)

6. Display (P8)

7. SOURCE button: Switches the input to be played.

8. Play buttons:

∫

: This button stops playback.

1

/; : This button pauses the playback.

:6

: Move to the track before the one being played.

59

: Move to the next track.

0 Depending on the input, these buttons may be disabled.

9. Remote control sensor

10.

USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

can also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.

0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port

(maximum 5 V/1 A) on the rear of the unit.

11.

PHONES jack: Connect headphones with a standard plug (‰6.3 mm diameter).

12.

PHONES LEVEL dial: Adjust the volume of the headphones.





   

  

4

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Front Panel (N-50AE)

Part Names

1. Í/I STANDBY/ON button/indicator: Switch the main power of the unit on and off. While

the unit is starting up, the indicator in the center of the button slowly flashes blue, then

lights blue when it has started.

2. STANDBY indicator: Lights red when the unit is in standby mode.

3. DIRECT indicator: Lights when the DIRECT mode is on. (P24)

4. Hi-Bit32 indicator: Lights when the Hi-Bit32 feature is on. (P24)

5. Up Sampling indicator: Lights when the Up Sampling feature is on. (P24)

6. Display (P8)

7. SOURCE button: Switches the input to be played.

8. Play buttons:

∫

: This button stops playback.

1

/; : This button pauses the playback.

:6

: Move to the track before the one being played.

59

: Move to the next track.

0 Depending on the input, these buttons may be disabled.

9. Remote control sensor

10.

USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

can also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.

0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port

(maximum 5 V/1 A) on the rear of the unit.





   



> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

5

E

N

Rear Panel (N-70AE)

1. ANALOG OUT jack: Use the supplied analog audio cable or a commercially available

XLR cable to connect an integrated amplifier, for example.

2. Wireless antenna jack: Connect the supplied wireless antenna to connect wirelessly. After

firmly attaching the antenna, adjust the angle according to the connection status.

0 When re-packaging the unit, etc., remove the wireless antenna to prevent damage.

3. DIGITAL OUT OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable

to connect an integrated amplifier, for example.

4. DIGITAL IN OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable to

connect a CD player, for example.

5. AC IN: Connect the supplied power cord.

6. CONTROL OUT jack: By connecting Pioneer brand amplifiers and CD players,

centralized control is possible, for example you can control the amplifiers and CD players

from the Pioneer Remote App.

7. USB DAC port: Use a USB cable (A—B type) to connect a computer.

8. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

can also supply power (maximum 5 V/1 A) to USB devices with a USB cable. It is also

possible to save or delete music files on the USB HDD with a computer over the network.

(P21)

9. NETWORK jack: Connect to the network with an ethernet cable.



  

  



6

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Rear Panel (N-50AE)

1. ANALOG OUT jacks: Use the supplied analog audio cable to connect an integrated

amplifier, for example.

2. Wireless antenna: Erect this to connect wirelessly. The diagram shows the movable range

for the wireless antenna. Do not try to force it beyond this range otherwise you may break

it.

3. DIGITAL OUT OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable

to connect an integrated amplifier, for example.

4. DIGITAL IN OPTICAL/COAXIAL jack: Use a digital optical cable or digital coaxial cable to

connect a CD player, for example.

5. AC IN: Connect the supplied power cord.

6. CONTROL OUT jack: By connecting Pioneer brand amplifiers and CD players,

centralized control is possible, for example you can control the amplifiers and CD players

from the Pioneer Remote App.

7. USB DAC port: Use a USB cable (A—B type) to connect a computer.

8. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

can also supply power (maximum 5 V/1 A) to USB devices with a USB cable. It is also

possible to save or delete music files on the USB HDD with a computer over the network.

(P21)

9. NETWORK jack: Connect to the network with an ethernet cable.

  







  

180°

90°

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

7

E

N

Remote Controller

1. Í STANDBY/ON button: When the main power of the unit is on, this turns the unit on or

into standby mode. The main power cannot be turned on or off with the remote controller.

2. DIRECT button: Switch the DIRECT mode on and off.(P24)

3. Hi-Bit32 button: Switch the Hi-Bit32 feature on and off.(P24)

4. A.S.R button: Switch the Auto Sound Retriever feature on and off. (P24)

5. INPUT SELECTOR buttons: Switches the input to be played.

6. button: Input source played switches each time you press one of these buttons.

7. REPEAT button: Set repeat play.

8. Play buttons:

:: Move to the track before the one being played.

/;: Play or pause play.

9: Move to the next track.

∫: Stop playback.

0 Depending on the input, the operation may not start.

9. TOP MENU button: Move to the top menu of the selected input.

10.

Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

11.

SETUP button: Displays the Setup menu. (P27)

12.

CLEAR button: Used when entering text, etc.

13.

DISPLAY button: Press to turn off the display of this unit. Press again to turn the display

on.

14.

Up Sampling button: Switch the Up Sampling feature on and off. (P24)

15.

SOUND button: Displays the SOUND menu. (P24)

16.

Lock Range button: Displays the Lock Range Adjust settings screen. (P24)

17.

NET STREAM button: Switch the network services, such as internet radio, each time you

press the button.

18.

DIMMER button: You can adjust the brightness of the

display in three steps.

19.

SHUFFLE button: Set shuffle play.

20.

NOW PLAYING button: When you have changed the

display during play, for example, this button returns the

display to show information about the file being played.

21.

RETURN button: Returns the display to the previous state.

22.

NET RADIO MENU button: Use this when playing the

internet radio.

0 HOME MEDIA, OPTION, 22, and 11 are not used.













































30°

Approx.7 m

8

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Display

1. The source is displayed.

(USB Front / USB Rear / USB DAC In / Music Server / Network / Digital In 1 / Digital In 2)

2. The name of the file, artist, album, etc., is displayed.

3. Displays the play status.

4. Displays file format, sampling frequency, and quantization bit information.

5. The file play status is displayed. This may not be displayed depending on the input or file.

6. This is displayed when the Lock Range Adjust setting is set to other than "Range 7".

(P24)

7. Lights in the following conditions.

:

When the connection setting on the unit is

"

Wired

"

and the unit is connected to the network.

:

When the connection setting on the unit is

"

Wired

"

and the unit is not connected to the network.

:

When the connection setting on the unit is

"

Wi-Fi

"

and the unit is connected to the network.

:

When the connection setting on the unit is

"

Wi-Fi

"

and the unit is not connected to the network.

8. If an album jacket is recorded for the file being played, it is displayed here.

9. This is displayed when the digital audio output setting is on. (P29)

10.

Lights in the following conditions.

: When all track repeat play is on

: When one track repeat play is on

: When shuffle play is on

11.

This is displayed when the Auto Sound Retriever feature is on. (P24)

FLAC

44.1

kHz

/24

bit

USB Front

Song

Artist

Album

L.R.A A S R D.OUT























1

9

E

N

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

Connections with an amplifier

Install

a

1

2

a

N-70AE is used in the illustrations. N-50AE does not

have an XLR jack.

You can play the audio from network features such as

internet radio and from devices connected to this unit

through speaker systems connected to integrated

amplifiers or AV receivers. Connect to suit the input jacks

on your amplifier.

Connecting with an analog audio cable

The signal is converted to analog in the D/A converter of

this unit and then output to an integrated amplifier, for

example. Connect the LINE IN jacks on an integrated

amplifier with the supplied analog audio cable to the

ANALOG OUT jack on this unit.

a

1

2

Integrated amplifier, AV receiver, etc.

This unit

a Analog Audio Cable

10

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Connecting with an XLR cable (N-70AE only)

The signal is converted to analog in the D/A converter of

this unit and then output to an integrated amplifier, for

example. Connect the XLR input jack on an integrated

amplifier with an XLR cable to the ANALOG OUT jack (XLR

jack) on this unit.

Connecting with a digital optical cable

The signal is converted to analog in the D/A converter of the

integrated amplifier, for example. Connect the OPTICAL IN

jack on an integrated amplifier with a digital optical cable to

the DIGITAL OUT OPTICAL jack on this unit.

0 The digital signals that can be output by this unit are

linear PCM signals with a sampling frequency and

quantization bit rate of 192 kHz/24 bit (operation may not

be possible with all connected devices or environments).

Connecting with a digital coaxial cable

The signal is converted to analog in the D/A converter of the

integrated amplifier, for example. Connect the COAXIAL IN

jack on an integrated amplifier with a digital coaxial cable to

the DIGITAL OUT COAXIAL jack on this unit.

0 The digital signals that can be output by this unit are

linear PCM signals with a sampling frequency and

quantization bit rate of 192 kHz/24 bit (operation may not

be possible with all connected devices or environments).

The control jack

By connecting Pioneer brand amplifiers or CD players, for

example, that have control jacks using monaural miniplug

cables (without resistors), you can centralize control of the

devices using the Pioneer Remote App.

Furthermore, even when the other devices are put in places

where the remote control signal is unable to reach, you can

enable operation of the other components through the

remote control sensor of this unit.

0 Also make sure to connect with the analog audio cable.

Centralized control cannot work correctly with only the

control jack connection.

0 With this connection, the remote control sensors on the

amplifier and CD player stop working. Point the remote

controller at remote control sensor of this unit.

a

CONTROL

IN

OUT

CONTROL

IN

OUT

CD player

Amplifier

This unit

a Monaural Miniplug Cables (without resistors)

11

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Connecting the power cord, etc.

a

1 2

a

Power cord connection

This model includes a removable power cord.

The power cord must be connected only after all other

connections are completed. Make sure you first connect the

power cord to AC IN terminal of the unit and then connect to

the outlet. Always disconnect the outlet side first when

disconnecting the power cord.

Ethernet cable connection

To connect to the network with an ethernet cable, use the

NETWORK jack. When using Wi-Fi connection, make

settings in initial settings (P12). When using N-70AE,

make sure you have connected the supplied wireless

antenna. (P5) You can enjoy features such as internet

radio and AirPlay by connecting to the network.

a Power Cord

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

12

Power On & Initial Setup

Initial Setu p

32

1

BLUE BLINKING

Starting up: When you press Í/I STANDBY/ON on the

main unit, the STANDBY/ON indicator in the center of the

button slowly flashes blue, then "Hello" is displayed on the

display about 20 seconds later. After this, the display goes

blank, then after the Pioneer logo is displayed, you can start

operating the unit.

Wi-Fi connection settings

When you first turn the power on, the initial setup screen is

displayed automatically, allowing you to easily make Wi-Fi

connection settings.

To set, select the item with the cursors on the remote

controller and press ENTER to confirm. To return to the

previous display, press RETURN.

To make Wi-Fi settings, select "Wi-Fi". If you have

connected with an ethernet cable, select "Wired (Exit)" and

confirm. If you select "Wi-Fi", select the method for setting

in the next screen (for example "Scan Networks").

Initial Setup

Wired (Exit)

Wi-Fi

Selects the method of network

connection

13

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

0 While setting up the network, screens asking you to

accept the Onkyo Group privacy policy and agree to the

privacy policies required to use the Chromecast built-in

feature are displayed. Select "Accept" and press ENTER

to indicate agreement. For information on the settings

required to use the Chromecast built-in feature and the

operations to play it, refer to the included Chromecast

built-in instruction sheet.

0 To redo the initial settings, press SETUP on the remote

controller, select "Wi-Fi" in "Network Setting" -

"Connection", then select "Wi-Fi Setup".

∫ Scan Networks

From the list of SSID for access points such as wireless

LAN routers, select the required SSID and make the

settings.

1. Select the SSID of the access point you want to connect

and then confirm.

2. Select either "Enter Password" or "Push Button" and

confirm. If the access point has an automatic setting

button, by selecting "Push Button" you can connect

without entering a password.

3. If you select "Enter Password", enter the password of the

access point and press ENTER. For details on how to

enter text, refer to "Entering text" (P25).

If you select "Push Button", then after pressing and holding the

automatic setting button on the access point for the required

amount of time, press ENTER on the remote controller.

4. is displayed when the settings are complete.

∫ Use iOS Device

Set by sharing the iOS device's Wi-Fi settings with this unit.

1. Connect the iOS device by Wi-Fi.

2. Select this device in the "SET UP NEW AIRPLAY SPEAKER..."

item on the screen of the iOS device and select "Next".

0 This unit is displayed as "Pioneer N-70AE XXXXXX" or

"Pioneer N-50AE XXXXXX".

3. After establishing the connection, select "Done" on the

screen of the iOS device.

4. is displayed on the display of the unit when the

settings are complete.

∫ Enter SSID of the access point

Set by entering the SSID of the access point you want to connect.

1. Enter the SSID. For details on how to enter text, refer to

"Entering text" (P25).

2. Select and confirm the authentication method.

0

If you select "None", proceed to step 3. If you select "WEP",

"WPA", or "WPA2", enter the password and confirm.

3. is displayed when the settings are complete.

Wireless

Input SSID

Use iOS Device

Scan Networks

Wireless

ddddddddddddddddd

ccccccccccccccccccc

bbbbbbbbbbbbbbbbb

aaaaaaaaaaaaaaaa

Wireless

Push Button

Enter Password

Password

A

Delete One Character[CLEAR]

Change Text[REPEAT]

SSID

A

Delete One Character[CLEAR]

Change Text[REPEAT]

Security Method

WPA2

WPA

WEP

None

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

14

USB Storage Device/HDD

Playback

1

2

a

b

d

c

e

f

Basic operations

You can play music files by connecting a USB storage

device or HDD (hard disk drive) to the USB port on the front

or rear of the unit.

0 The USB port on the front supports a maximum 5 V/0.5 A

power supply. If the HDD requires more than this,

connect to the USB port (maximum 5 V/1 A) on the rear

of the unit.

1. Turn the unit on.

2. Press USB FRONT or USB REAR.

3. Plug your USB storage device or HDD into the USB port

on the front or rear.

4. Folders and music files are displayed on the display

when loading is complete.

5. Select the folder or music file with the cursors (d) of the

remote controller and press ENTER (e) to confirm. To

return to the previous display, press RETURN (f).

6. Use play buttons (c) to stop play or choose tracks to play.

0 The display of album name, artist name, and album art is

supported with MP3/WMA/Apple Lossless/FLAC/AAC/

USB Front

No Storage

USB Front

USB Storage

USB Front

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

15

E

N

DSD (DSF only) format music files. The formats for

embedded images are JPEG and PNG.

0 Characters that cannot be displayed by this unit appear

as "

¢

".

0 The USB port of this unit conforms with the USB 2.0

standard. The transfer speed may be insufficient for

some content you play, which may cause some

interruption in sound.

Repeat play

1. Repeatedly press REPEAT (a) during play to display

or on the display.

: Repeat play of all tracks.

: Repeat play of the selected individual track.

To cancel repeat play, press REPEAT (a) several times

until the icons disappear.

Shuffle play

1. Repeatedly press SHUFFLE (b) during play to display

on the display.

: Play tracks in a folder randomly.

To cancel shuffle play, press SHUFFLE (b) until the icon

disappears.

USB Storage / HDD Device Requirements

0 Note that operation is not guaranteed with all USB

storage devices or HDD.

0 This unit can use USB storage devices that comply with

the USB mass storage device class standard. (However,

there are still devices that cannot be played by this unit

even if they comply with the USB mass storage class

standard.)

0 The unit is also compatible with USB storage devices

using the FAT16 or FAT32 file system formats. Other

formats such as exFAT, NTFS, and HFS cannot be

played by this unit.

0 If the USB storage device has been partitioned, each

section will be treated as an independent device.

0 Up to 20,000 tracks per folder can be displayed, and

folders may be nested up to 16 levels deep.

0 USB hubs and USB storage devices with hub functions

are not supported. Do not connect these devices to the

unit.

0 USB storage devices with security function are not

supported on this unit.

0 If the USB storage device or HDD comes with an AC

adapter, we recommend that you use its AC adapter to

power it.

0 Media inserted to the USB card reader may not be

available in this function. Furthermore, depending on the

USB storage device, proper reading of the contents may

not be possible.

0 We accept no responsibility whatsoever for the loss or

damage to data stored on a USB storage device when

that device is used with this unit. We recommend that you

back up your important music files beforehand.

Supported Audio Formats

This unit supports the following music file formats. Note that

sound files that are protected by copyright cannot be played

on this unit.

MP3 (.mp3/.MP3):

0 Supported formats: MPEG-1/MPEG-2 Audio Layer 3

0 Supported sampling rates: 44.1 kHz, 48 kHz

0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

WMA (.wma/.WMA):

0 Supported sampling rates: 44.1 kHz, 48 kHz

0 Supported bitrates: Between 5 kbps and 320 kbps and

VBR.

0 WMA Pro/Voice/WMA Lossless formats are not

supported

WAV (.wav/.WAV):

WAV files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AIFF (.aiff/.aif/.AIFF/.AIF):

AIFF files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/

.3G2):

0 Supported formats: MPEG-2/MPEG-4 Audio

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz

0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

FLAC (.flac/.FLAC):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

Apple Lossless (.m4a/.mp4/.M4A/.MP4):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 16 bit, 24 bit

DSD (.dsf/.dff/.DSF/.DFF):

0 Supported formats: DSF/DSDIFF

0 Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz

1

16

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Internet Radio

Basic operations

You can use internet radio services such as TuneIn by

connecting this unit to a network that has an internet

connection.

Depending on the internet radio service, the user may need

to register from their computer first.

1. Turn the unit on.

2. Press NETWORK.

3. Select "TuneIn Radio" with the cursors (a) of the remote

controller and press ENTER (b) to confirm. After

switching the display to the internet radio service, you

can select stations with the cursors (a) on the remote

controller and press ENTER (b) to confirm. To return to

the previous display, press RETURN (c).

TuneIn

You can register a station you have played as a favorite.

1. Press NET RADIO MENU (d) while playing TuneIn.

2. Select "Add to My Presets" on the display and confirm.

3. To play a favorite, in the top screen of TuneIn, select the

registered station in "My Presets" and confirm. To delete

favorites, press NET RADIO MENU (d) during play,

select "Remove from My Presets" and confirm.

1

a

d

b

c

Network

TIDAL

Deezer

Spotify

TuneIn Radio

17

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Spotify

d

b

e

a

c

1

4

3

2

Basic Operation

Spotify Connect play is possible by connecting this unit to

the same network as a smart phone or tablet. To enable

Spotify Connect, install the Spotify application on your

smartphone or tablet and create a Spotify premium account.

1. Connect the smartphone to the same network as this

unit.

2. Start the Spotify app.

3. Play the track in the Spotify app, then after switching to

the screen for controlling play, tap "Devices Available" at

the bottom of the screen.

4. Select this unit.

0 This unit is displayed as "Pioneer N-70AE XXXXXX" or

"Pioneer N-50AE XXXXXX".

5. This unit turns on automatically and the input selector

changes to Network and streaming of Spotify starts.

0 If "Option Setting" - "Power Off Setting" - "Network

Standby" is set to "Off" in the Setup menu, manually

turn the unit on and then press NETWORK on the

remote controller.

0 Refer to the following for Spotify settings:

www.spotify.com/connect/

The following remote controller operations are also

possible.

(a) This button starts repeat play.

(b) This button plays the previous track.

(c) This button starts shuffle play.

(d) Pressed during play this button pauses playback.

Pressed while paused, and it restarts play.

(e) This button plays the next track.

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

18

AirPlay

®

1 3

4

2

e.g., iOS 10

Basic Operation

You can wirelessly enjoy the music files on an iPhone

®

,

iPod touch

®

, or iPad

®

connected to the same access point

as this unit. Update the OS version on your iOS device to

the latest version.

1. Connect the iOS device to the same network as this unit.

2. Tap the AirPlay icon in the play screen of the music

app on the iOS device and select this unit from the list of

devices displayed.

0 This unit is displayed as "Pioneer N-70AE XXXXXX" or

"Pioneer N-50AE XXXXXX".

0 If an "AirPlay Password" has been set on this unit,

enter the password you set.

3. Play the music files on the iOS device.

0 At the time of purchase, the Network Standby feature is

set to On, and when play of AirPlay starts, the power of

this unit automatically comes on and play starts.

0 Due to the characteristics of AirPlay wireless technology,

the sound produced on this unit may slightly be behind

the sound played on the AirPlay-enabled device.

0 SHUFFLE and REPEAT on the remote controller do not

work. Operate from the iOS device.

You can also play the music files on a computer with iTunes

(Ver. 10.2.2 or later). Make sure this unit and the computer

are connected to the same network, click the AirPlay icon

in iTunes, select this unit from the list of devices

displayed, and start play of a music file.

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

19

E

N

Music Server

It is possible to stream music files stored on PCs or NAS

devices connected to the same network as this unit. The

network servers this unit is compatible with are those PCs

with players installed that have the server functionality of

Windows Media

®

Player 11 or 12, or NAS that are

compatible with home network functionality. You may need

to make some settings in advance to use Windows Media

®

Player 11 or 12. Note that only music files registered in the

library of Windows Media

®

Player can be played.

Configuring Windows Media

®

Player

∫ Windows Media

®

Player 11

1. Turn on your PC and start Windows Media

®

Player 11.

2. In the "Library" menu, select "Media Sharing" to display a

dialog box.

3. Select the "Share my media" check box, and then click

"OK" to display the compatible devices.

4. Select this unit, and then click "Allow".

0 When it is clicked, the corresponding icon is checked.

5. Click "OK" to close the dialog.

0 Depending of the version of Windows Media

®

Player,

there may be differences in the names of items you can

select.

∫ Windows Media

®

Player 12

1. Turn on your PC and start Windows Media

®

Player 12.

2. In the "Stream" menu, select "Turn on media streaming"

to display a dialog box.

0 If media streaming is already turned on, select "More

streaming options..." in the "Stream" menu to list

players in the network, and then go to step 4.

3. Click "Turn on media streaming" to list players in the

network.

4. Select this unit in "Media streaming options" and check

that it is set to "Allow".

5. Click "OK" to close the dialog.

0 Depending of the version of Windows Media

®

Player,

there may be differences in the names of items you can

select.

Playing

1. Turn the unit on.

2. Start the server (Windows Media

®

Player 11, Windows

Media

®

Player 12, or NAS device) containing the music

files to play.

3. Make sure that the PCs and/or NASs are properly

connected to the same network as this unit.

4. Press MUSIC SERVER.

5. Select the server or music file with the cursors (a) of the

remote controller and press ENTER (b) to confirm. To

return to the previous display, press RETURN (c).

0 If "No Server" is displayed, check whether the network is

properly connected.

0 Depending on the server being used and the files played,

elapsed play time and remaining play time may not be

displayed.

0 For music files on a server, there can be up to 20,000

tracks per folder, and folders may be nested up to 16

levels deep.

1

a

b

c

Music Server

ddd

ccc

bbb

aaa

Sidan laddas ...

Pioneer N-50AE Användarmanual

Denna manual är också lämplig för

Pioneer N-50AE Användarmanual

på andra språk

Relaterade papper

Andra dokument