Deltaco DVR-108 Användarmanual

Deltaco

DVR-108

User manual

Index

1

EN – Introduction

1.1 Brief Introduction

1.2 Main Features

1.2.1 Video/Audio Compression

1.2.2 Recording

1.2.3 Preview and Playback

1.2.4 Control

1.2.5 Alarm

1.3 Network

2 Installation

2.1 Front Panel Operation

2.2 Rear Panel Description

2.3 Remote controller

2.4 Hard Disk Installation

2.5 Rear Panel Connection

3 Menu Description

3.1 Menu Operations

3.1.1 General Operations

3.1.2 Menu Selection

3.1.3 Sub Menu Selection

3.1.4 Screen Operation

3.1.5 Save/Exit

4 Operations

4.1 Turn on

4.1.1 Startup

4.2 System Settings

4.3 Preview

4.3.1 Preview Operation

4.3.2 OSD Settings

4.3.3 Channel Status Display Area

4.3.4 Tool Bar

4.4 Record

4.4.1 Manual Record

4.4.2 Record Schedule

4.5 Camera Control

4.5.1 PTZ Control

4.5.2 Motion Detection Settings

4.6 Playback

4.6.1 File search

4.6.2 Playback Control

4.7 Backup

4.8 Alarm settings

4.8.1 Alarm Input

4.8.2 Event Handling

4.9 Maintenance

4.9.1 Log View

4.9.2 Upgrade

7

8

10

12

13

15

16

17

18

19

20

21

23

24

25

26

4.9.3

Device Information

4.9.4 Format HDD

4.9.5 Lock Screen

4.9.6 Restore to factory defaults

5 Network operations

5.1 Network settings

5.2 Web Client Operation

5.2.1 Web Screen Description

5.2.2 Device Parameters Settings

5.2.3 Playback

5.2.4 Log

5.2.5 Remote Upgrade

6 Speciﬁcations

1 SE – Introduktion

1.1 Översikt

1.2 Egenskaper

1.2.1 Video/Audio-komprimmering

1.2.2 Inspelning

1.2.3 Visning och uppspelning

1.2.4 Kontroll

1.2.5 Alarm

1.3 Nätverk

2 Installation

2.1 Frontpanelen

2.2 Beskrivning av bakpanelen

2.3 Fjärrkontroll

2.4 Installation av hårddisk

2.5 Anslutningar på bakpanelen

3 Menyer

3.1 Menu Operations

3.1.1 Allmän hantering

3.1.2 Menyval

3.1.3 Val i undermenyer

3.1.4 Hantering på skärmen

3.1.5 Spara/avsluta (Save/Exit )

4 Hantering

4.1 Slå på DVRen

4.1.1 Uppstart

4.2 Systeminställningar

4.3 Visningsläge

4.3.1 Hantering i visningsläge

4.3.2 OSD inställningar

4.3.3 Statusområde

4.3.4 Verktygsfältet

4.4 Inspelning

4.4.1 Manuell inspelning

4.4.2 Schemalagd inspelning

4.5 Kamerakontroll

4.5.1 PTZ kontroll

26

27

28

29

30

31

32

33

35

36

38

39

40

41

42

43

44

45

46

47

4.5.2

Inställningar för rörelsestyrd inspelning

4.6 Uppspelning

4.6.1 Filsökning

4.6.2 Uppspelningskontroller

4.7 Backup

4.8 Larminställningar

4.8.1 Larmingångar

4.8.2 Larmhantering

4.9 Underhåll

4.9.1 Logs - Loggar

4.9.2 Uppgradering

4.9.3 Enhetsinformation (Device Information )

4.9.4 Formatera hårddisken (Format HDD)

4.9.5 Lås skärmen (Lock Screen )

4.9.6 Återställ fabriksinställningarna (Restore to factory defaults)

5 Nätverkthantering

5.1 Nätverksinställningar

5.2 Hantering av webbklienten

5.2.1 Beskrivning av webbsidan

5.2.2 Inställning av enhetsparametrar

5.2.3 Uppspelning

5.2.4 Log

5.2.5 Fjärruppgradering

6 Speciﬁkationer

1 FI – Johdanto

1.1 Yleistä

1.1 Ominaisuudet

1.2.1 Video/Audio-komprimointi

1.2.2 Tallennus

1.2.3 Näyttö ja toisto

1.2.4 Ohjaus

1.2.5 Hälytys

1.3 Lähiverkko

2 Asennus

2.1 Etupaneeli

2.2 Takalevyn kuvaus

2.3 Kaukosäädin

2.4 Kiintolevyn asennus

2.5 Takalevyn liitännät

3 Valikot

3.1 Valikon toiminnot

3.1.1 Yleinen käyttö

3.1.2 Valikkojen valinta

3.1.3 Alavalikkojen valinta

3.1.4 Näytön hallinta

3.1.5 Säästä/Lopeta (Save/Exit)

4 Käyttö

4.1 Käynnistä DVR

4.1.1 Käynnistys

49

50

51

52

53

55

57

58

61

62

64

65

66

67

68

69

4.2

Järjestelmän asetukset

4.3 Näyttötila

4.3.1 Näyttötilan ohjaus

4.3.2 OSD asetukset

4.3.3 Statusalue

4.3.4 Työkalupalkki

4.4 Tallennus

4.4.1 Manuaalinen tallennus

4.4.2 Ajastettu tallennus

4.5 Kameran ohjaus

4.5.1 PTZ ohjaus

4.6 Liikkeen ohjaaman tallennuksen asetus

4.7 Toisto

4.7.1 Tiedostojen haku

4.7.2 Toiston ohjaus

4.8 Backup

4.9 Hälyttimen asetukset

4.9.1 Hälyttimen sisääntulot

4.9.2 Hälytyksen ohjaus

4.10 Huolto

4.10.1 Logs - Lokit

4.10.2 Päivitys

4.10.3 Yksikköä koskevat tiedot (Device Information )

4.10.4 Formatoi kiintolevy (Format HDD)

4.10.5 Lukitse näyttö (Lock Screen )

4.10.6 Palauta tehtaan asetukset (Restore to factory defaults)

5 Verkkotoiminnot

5.1 Lähiverkon asetukset

5.2 Nettiasiakkaan ohjaus

Nettisivun kuvaus

5.2.2 Yksikön parametrien asetus

5.2.3 Toisto

5.2.4 Loki

5.2.5 Etäpäivitys

6 Erittelyt

1 DK – Introduktion

1.1 Introduktion

1.2 Egenskaber

1.2.1 Video/Lyd- komprimering

1.2.2 Optagelse

1.2.3 Visning og afspilning

1.2.4 Kontrol

1.2.5 Alarm

1.3 Netværk

2 Installation

2.1 Frontpanelet

2.2 Beskrivelse af bagpanelet

2.3 Fjernbetjeningen

2.4 Installation af harddisk

70

71

72

73

75

76

77

78

79

81

83

84

85

87

88

90

91

6

2.5

Tilslutninger på bagpanelet

3 Menuer

3.1 Menu Operations

3.1.1 Almen håndtering

3.1.2 Menu valg

3.1.3 Valg i undermenuer

3.1.4 Håndtering på skærmen

3.1.5 Gemme/afslutte (Save/Exit )

4 Håndtering

4.1 Tænd for DVR’en

4.1.1 Opstart

4.2 Systemindstillinger

4.3 Visnings mode

4.3.1 Håndtering i visnings mode

4.3.2 OSD indstillinger

4.3.3 Statusområde

4.3.4 Værktøjsfelt

4.4 Optagelse

4.4.1 Manuel optagelse

4.4.2 Skemalagt optagelse

4.5 Kamerakontrol

4.5.1 PTZ kontrol

4.5.2 Indstillinger for bevægelsesstyrede optagelse

4.6 Afspilning

4.6.1 Filsøgning

4.6.2 Afspilnings panel

4.7 Backup

4.8 Alarmindstillinger

4.8.1 Alarmindgange

4.8.2 Alarmhåndtering

4.9 Vedligeholdelse

4.9.1 Logs

4.9.2 Opgradering

4.9.3 Enhedsinformation (Device Information)

4.9.4 Formater harddisken (Format HDD)

4.9.5 Lås skærmen (Lock Screen)

4.9.6 Geninstaller fabriksindstillingerne (Restore to factory defaults)

5 Netværkthåndtering

5.1 Netværksinstillinger

5.2 Håndtering af webklienten

5.2.1 Beskrivelse af websiden

5.2.2 Indstilling af enhedsparametre

5.2.3 Afspilning

5.2.4 Log

5.2.5 Fjernopgradering

6 Speciﬁkationer

92

93

94

95

96

97

98

99

101

102

103

104

105

107

109

110

7

1 EN – Introduction

1.1 Brief Introduction

DVR-108 is a 4-channel playback H.264 stand alone DVR with Pentaplex function:

record, playback, live preview, remote preview and backup supported. With professional

and high performance intelligent audio & video solution, user-friendly GUI and practical

industrial designs, DVR-108 is quite suitable for civil applications such as home, stores,

Internet bars and small offices besides the common security & surveillance applications.

1.2 Main Features

1.2.1 Video/Audio Compression

• 4 channel PAL/NTSC/SECAM video signal input and H.264 compression standard

with each channel being compressed independently in real-time CIF resolution.

• 4 channel audio signal input and G.726 compression standard with each channel

being compressed independently in 24Kbps.

• Multiplex stream with audio & video synchronized and individual video stream

supported.

• Four-level selection of record quality and self-defined bit rate and frame rate

supported.

• Adjustable video parameters.

• Multi-area motion detection.

• OSD of channel name and time supported.

1.2.2 Recording

• Manual record and schedule record supported. The schedule record types include:

timing, motion detection, alarm, motion detection & alarm.

• SATA hard disk supported.

• Backup and clip record files through USB flash disk, portable USB HDD, and

USB CD/RW supported.

1.2.3 Preview and Playback

• Simultaneous output of VGA, TV, and S-Video.

• Up to 4 channels playback in fast play mode, slow play mode, rewind and single

frame forward supported.

• OSD of channel name and time supported.

• Status displaying of local record, alarm and motion detection supported.

1.2.4 Control

• Controlling of PTZ and dome supported.

8

• Setting and calling preset, sequence and track supported.

1.2.5 Alarm

• Local alarm (includes exception and motion detection) triggered handling

supported.

• Alarm schedule (layout and cancel) supported.

• Alarm triggered handling including record, alarm output and PTZ preset

supported.

1.3 Network

• TCP/IP supported.

• PPPoE supported.

• Dynamic Host Configuration Protocol (DHCP) supported.

• Real-time preview, downloading and playback remotely through network

supported.

• Controlling of PTZ, configuring device parameters, acquiring device status and

logs, and upgrade remotely through network supported.

• Local recording through network supported.

2 Installation

This chapter is a general description of the device interfaces and connections. It

describes the way of hard disk installation, the interfaces of the front panel and the rear

panel for users to connect cables correctly.

2.1 Front Panel Operation

.

NO Type Name/Icon Description

1 Channel LED 1-4 Channel LED /

Recording Status LED

Orange when recording.

Green when non-recording.

Buttons PTZ Operation Key Press 1 to adjust iris larger,

Press 2 to adjust iris smaller

Press 3 to focus in, press 4 to focus out

9

2 Numbers 0-9 Input numbers. One key channel selection from CH1 to CH4

in preview mode (1/2/3/4)

3 Arrow Buttons



When in menu mode, press , to move to

selection boxes, press  to selec submenu

parameters

Press it to confirm operations in menu mode.

Press it to select record type in setting

schedule.

Press it to change status of the current motion

detection block

HDD LED

Hard disk indicator. Green.

Blinks when reading/writing.

Black when non-operation.

Event LED

Event alarm indicator.

Light when alarming, black when not alarming

4

IR LED

Remote Controller operation indicator. Green.

Blinks when operating.

Black when non-operation.

Press it to switch from single split to multi

splits view mode, or reverse in preview and

playback mode.

Press it to enter/exit continuous selection

when setting motion detection area and

schedule record.

Press it to set start time and end time in file

search.

Play/Pause

One key file search.

One key start/stop recording.

One key PTZ control

5 Main Functions

Return to upper menu. The same as

[ESC]button of remote controller.

10

One key system setup

Acknowledge alarm.

Backup record.

LED Power LED Red when power on. 6

Power on/off

Press it to power on/off device.

Hold pressing 3 seconds to shut down forcely.

2.2 Rear Panel Description

Description

1 Fan vent

2 USB interface: USB2.0 High-Speed(480Mbps), support USB flash disk, portable USB

HDD, USB mouse, and USB CD-RW.

VIDEO IN: 4 channel video input, RCA (1Vp-p,75Ω)

3 AUDIO IN: 4 channel audio input, RCA (2Vp-p,600Ω)

4 AUDIO OUT: 1 channel audio output, RCA (2Vp-p,600Ω)

5 VGA: DIN-15 (optional) , 800x600@60, 800x600@75, 1024x768@60, 1024x768@75,

1280x1024@60,1440x900@60(optional)；

TV-OUT:1Vp-p, 75Ω；

S-VIDEO:4-Pin SVideo,75Ω；

NET:RJ45,10/100M self-adaptive；

6 PS/2 Mouse:support PS2 mouse, plug and play

ALARM OUT:

1 channel switch-level alarm output,30VDC 1A, 125VAC 1A；

7

RS422 interface:for duplex operation of data transmitting and

receiving

TX+:transmit data

TX-:transmit data

RX+:receive data

11

RX-:receive data

ALARM IN:4 channel switch-level input, N/O. or N/C.

G:For ground connection

Power Input:DC 19V/2.5A

12

2.3 Remote controller

No Name Description

1 Power

on/off

Turn on/off the device, same as the

button of front panel

2 Adjust

picture

parameters

Adjust brightness up/down

Adjust contrast up/down

3 Function

Buttons

record, same as the button of front

panel.

switch from single split to multiple splits view

mode

picture capture

return to upper menu, same as the

button of front panel

4 Play control

Stop, Play/pause, Fast forward

Next frame, Next section.

Reverse play/fast reverse,

Previous section

5 Function

Buttons

CN/EN:Switch from Chinese to English, or

reverse.

9:Acknowledge alarm notifications, same as

the

button of front panel.

ID:Set ID of remote controller.

6 Numbers Input numbers or select to switch among

relevant channels.

7 Function DEL:Delete

FN:Auxiliaries, same as the

button of

front panel.

8 Arrow buttons The same as arrow buttons of front panel

9 Function

Buttons

SET:Set parameters, same as the

button of front panel.

PTZ:Enable PTZ control, same as the

button of front panel.

PROG:set sequence ,

PRESET:set preset,

CALL:call preset,

SEQ:call sequence,

13

SCAN:Scan automatically

2.4 Hard Disk Installation

The hard disk is not included in factory fittings. Users can mount suitable hard disk by

calculating its capacity referring to Appendix 5.2.

1. Open the DVR case.

2. Mount the 4 shock absorption washers into the clamping slots (four protruding

steps) in the case.

3. Connect the HDD data cable and HDD power cable to HDD.

4. Attach the hard disk to the shock absorption washers by aiming installation holes

to the case, hold and fix them by 4 M3*12 Head Screws plus plain washers.

5. Connect the HDD data cable and HDD power cable to the respond interfaces of

main board.

6. Replace the DVR top cover.

Note1: Please use the HDD special for DVR, and buy HDD from regular channels so that

the quality can be guaranteed.

Note2:Please format HDD for the first use, or system will sent error notification of “Hard

disk error” accompanied with audio alarm. Please see 4.9 Maintenance for details

2.5 Rear Panel Connection

Power Input

Connect power adapter to Power Input interface of DVR. Confirm that the DVR power supply

input switch is positioned correctly for the local voltage before connecting and powering on

the unit. Turn on the unit. The power LED will light if the power cable is connected correctly.

1

Note: Please use the power adapter contained in the package.

Video Input

The video input interface is standard BNC socket, 1Vp-p, 75 Ω.

2

Note: The video signal cable should keep away from the interference of strong

electromagnetism and city electric field.

Audio Input

The audio input interface is standard RCA socket, 2Vp-p, 600 Ω.

3

Note: The audio input resistance is a little bit high; please use active sound collection device

or active microphone. And the audio signal cable should keep away from the interference of

strong electromagnetism and electric field.

4 Network Input

14

The network input interface is RJ45 10/100M self-adaptive.

Note: Confirm that the network band width is enough for transmitting high definition image

smoothly.

5 Alarm Input and Output

The alarm input device should be the type of GND connected alarm or voltage input alarm,

which can be set as N/O. or N/C.

The requirement of signal input level for voltage input alarm type is: low level: 0-2V; high

level: 5-15V. The green angle pins of signal cable are supplied for access of PTZ and

alarming devices. Please follow these steps to connect:

1. Pull out the green angle pins that inserted in the alarm input and output interfaces.

2. Screw out the screws by micro Philips screwdriver, insert the signal cable into

interface under spring, and then tighten the screws.

3. Plug in the connected pins into green angle pin socket.

PTZ Input

Connect the PTZ control interface to RS422 TX+ and TX- interfaces of rear panel. The

connection method is similar as above.

6

Note: Please refer to PTZ manual for setting specific parameters, for some PTZ devices

contain multiple telecommunication protocols, baud rates and IDs.

7 VGA/Monitor Input

Video output interface: TV (BNC), VGA and S-Video. They can work together simultaneously.

15

3 Menu Description

There are several ways to control the DVR, including the Front Panel Operation, the

Remote Controller Operation, the Mouse Operation, PC terminal Client Software Operation

and the Client IE Web Operation. Each control method allows you to operate the DVR

conveniently. While some functions are controlled more easily by one method than

another in particular environment.

Front Panel and Remote Controller operation are very similar. Although the interface is

different they both use similar button designations to perform the same operations. The

Remote Controller is more convenient with which you can stand back from the DVR while

you are entering commands. Using the Front Panel requires that you are within arms-

reach of the DVR.

You may find that mouse operation is the more convenient for local operation of the DVR.

Mouse operation is intuitive for PC users. A left mouse click will select most options.

From the live display a right mouse click will pop-up the Tool Bar. Selecting most options

will be straight forward using traditional mouse operation. The particulars of operations

are listed in the manual.

This chapter describes the Menu Structure and most of the General Operations users will

be used in using the DVR.

16

3.1 Menu Operations

3.1.1 General Operations

Press [SET] button to enter into system setting screen.

Press [●] button to start/stop recording manually.

17

Press [ ] button to play record file.

Press[PTZ] button to enter into PTZ control screen.

3.1.2 Menu Selection

The highlight menu is the current active one. User can move highlight icon to the menu

needed using [▲],[▼],[ ],[ ] button, and press [OK] button to confirm selection, or press

[ESC] or button to return to upper menu.

3.1.3 Sub Menu Selection

Selection box: User can move highlight icon to the selection box needed using [ ],[ ]

button, and press [OK] button to confirm selection. Multiple items are allowed to be

selected together at once by left clicking mouse. Sub menu list: User can move highlight

icon to the sub menu needed using [ ],[ ] button. Or roll mouse to select directly. Only

one item can be selected here. Edition box: when in edition box, user can type in

numbers directly by pressing number buttons. Press [DEL] to delete the character before

cursor and press [OK] or [ESC] button to exit. Sub screen button: Press it to pop up sub

screen. When in sub screen, select “Confirm” to save configuration and return to the

upper menu. Press [ESC] or select “Cancel” to return to the upper menu without being

saved.

3.1.4 Screen Operation

Use [ ],[ ] to move highlight icon to any of the selection boxes. Press [OK] button to

switch to another selection status. Use [▲], [▼] to specify the sub menu value where sub

menu selections exist.

3.1.5 Save/Exit

Exit: User can click × button on the right upper corner, or single right click mouse, or

press [ESC] button to enter into the Save & Exit screen. You can select exit directly or exit

after being saved.

4 Operations

This chapter mainly describes the main system operations of DVR. Please see the

following contents for details.

4.1 Turn on

4.1.1 Startup

The Power LED will light after powering on correctly. Please refer to 2.5 Rear Panel

Connection for details of connection method. Press [Power on/off] button to start up

device, the login box will appear then. Please type in user name and relevant password to

log in.

Note1: It takes about 60 seconds to start up, please wait for a moment.

Note2: Modify password by selecting <Tool Bar>→<System>→<System

Setting>→<Password Setting>. When verification of original password accomplished, the

Password Set screen will appear. Please enter new password and confirm it, it will take

18

effect instantly.

Note3: User can restore factory defaults by short-circuit the “JP 10” on main board.

The default password is 888888.

4.2 System Settings

Language

<Tool Bar>→<System>→<System Setting>→< 语言/Language> to set language.

VGA Resolution

<Tool Bar>→<System>→<System Setting>→<VGA Resolution> to set VGA

resolution and refresh rate. It supports

800×600@75Hz,800×600@60Hz,1440×900@60Hz,1280×1024@60Hz,1024

×768@75Hz,1024×768@60Hz currently. Please select relevant values according

to the parameters of VGA

Date/Time

<Tool Bar>→<System>→<System Setting>→<Time Format> to set time format. 12

hours and 24 hours are supported. Please select <Tool Bar>→<System>→<System

Setting>→<Time Setting> to set date and time.

Video Standard

<Tool Bar>→<System>→<System Setting>→<Video

Standard> to set video standard. PAL, SECAME, and NTSC are supported. Please

select according to the parameters of the camera.

Note1 In order to avoid record files’ time confusion, you’d better stop recording before

modifying system time.

Note2 “Language” and ”Time” will take effect instantly. “Record Resolution” and

”Video Standard” will take effect after being saved.

Note3 Users can refer to the navigations on the bottom of the main screen to look for

relevant guides

4.3 Preview

After start-up system, quad splits live view screen will appear. Right click mouse in

preview mode, the Tool Bar will appear. Videos, OSD of channel name, record time, and

alarm notifications will be displayed on the screen.

4.3.1 Preview Operation

View Mode

Switching

When in quad splits view mode, the tile with highlight white border is the current

selected one. User can use mouse or press [Direction] buttons to switch to

another tile. If the audio output device is connected, the audio can also be

previewed together with video.

User can select to display a single particular channel by pressing the

corresponding [Numbers] buttons 1, 2, 3, 4.

When in single split view mode, user can enter into quad splits view mode by

pressing

button directly, or reverse.

19

Image

Parameters

Setting

Please select <Tool Bar>→<System>→<Camera Setting>→<Color Setting> to set

brightness, contrast, hue and saturation. It will take effect instantly.

Note1: User can set image parameters of one channel one time or all of the four

channels together at

once by selecting All in <Camera Channel>. It is similar in other screen when

user wants to set four

channels together at once: select All in <Channel>.

4.3.2 OSD Settings

The OSD of channel name and system time is supported. Please select <Tool Bar>→

<System> →<Record Setting> →<OSD Setting> to set. The channel name will be

displayed on left upper corner and the channel time will be displayed on the righter

corner of the screen.

Note: After setting accomplished, the system time of OSD will be only added to record

data stream.

4.3.3 Channel Status Display Area

The channel statuses include: “motion detection triggered recording” / “common

recording” / “alarm triggered recording” / “peripheral alarm input” / “alarm output”.

Indicates “motion detection”. The settings of motion detection include sensitivity

and area selection. Please see 4.5.2 Motion Detection Settings for details.

Blue indicates “common recording” or “manual recording”. Please see 4.4

Record for details.

Green indicates “motion detection triggered recording”.

Red indicates “alarm triggered recording”.

The four icons indicate the alarm input status.

When alarming, it changes into red. Peripheral alarm input can trigger multiple

events handling, please see 4.8 Alarm Settings for details.

Indicates alarm output. When alarming outputs, it changes into red

‹

4.3.4 Tool Bar

Right click mouse or press [OK] button in preview mode, the Tool Bar shown as below will

appear:

20

System configuration. Please see 3.1 Menu Structure for details.

Manual record. Please see 4.4.1 Manual record for details.

Search, playback and backup record files, please see 4.6 Playback and 4.7 for

details.

PTZ operation. Please see 4.5.1 PTZ Control for details.

Click to acknowledge alarm notification.

Power off.

Alarm notifications.

4.4 Record

Record type contains manual record and schedule record. The priority of manual record is

higher than schedule. If the record schedule is conflict with manual record, the manual

record will be processed firstly until the manual record being canceled. Record types

include “common recording” / “alarm triggered recording” / “motion detection triggered

recording” / “alarm & motion detection triggered recording”. Each of them is indicated

with grid of different color, and each color indicates a particular record status. Please see

figure IV-1 record schedule for details.

Record

resolution

CIF

Record quality ”Best 768Kbps” / “High 640Kbps” / “Better 512Kbps” / “Common 384Kbps”

Record frame

rate

If the current selection is PAL, the frame rate options are “All” / “12” / “6” / “3”

/ “1” / “Customized”.

If the current selection is NTSC, the frame rate options are “All”/ “15” / “7” /

“3” / “1” / ”Customized”.

Default is “All”, 25 fps and 30 fps.

Record

Resource

“Video” or ”Video and Audio”

4.4.1 Manual Record

Please select <Tool Bar>→<Manual Record> to let the specific channel record or not.

Press [●] button to start/stop recording manually.

NOTE 1: The video recorded manually is named “common recording”.

4.4.2 Record Schedule

Please select <Tool Bar>→<System>→<Record Setting> to set record schedule. The

Sidan laddas...

Deltaco DVR-108 Användarmanual

Deltaco DVR-108 Användarmanual

på andra språk

Andra dokument