English
DAB/DAB+/DMB Mode
Bezel Control
Manual Tune Up: To manually tune up to a higher frequency station, rotate the bezel to the right.
Manual Tune Down: To manually tune down to a lower frequency station, rotate the bezel to the left.
Rescan: To rescan for all DAB stations, quickly double press the bezel.
Add a station to your preset stations: To add a station to your saved preset stations, press the bezel once.
Once added, you may access it using the remote. It is also possible to add presets by using your remote.
Simply hold the number preset you would like to use and wait for on-screen confirmation. To delete the
preset, either hold down the button on the remote or long press on the bezel control.
Settings
Note: All of these functions are available through the remote using the option on the remote.
Clock Set
Manual Time Set: Press the on the remote, then use the navigation arrows until “Manual Time Set”
appears onscreen.
Push the SELECT button. Select the hour by using the navigation arrows, and press SELECT to confirm. Do
this again to select the minute, meridian, day, month, and year. To confirm, select YES then press the
SELECT button.
Auto Time Enable: To allow your Model One Digital to update the time via WiFi, FM, or DAB, set to
“Enable”. Selecting “Disable” will require you to manually set the time.
Alarm Set
Press the on the remote, then use the navigation arrows until “Alarm Set” appears onscreen. Push the
SELECT button on the remote. Select the hour by using the navigation arrows, and press SELECT to confirm.
Do this again to select the minute, and whether you would like the alarm to be active. To confirm, select YES
then press the SELECT button on the remote.
Sleep Time Set
Press the on the remote, then turn it until “Sleep Time Set” appears onscreen. Press the SELECT button
on the remote. Select the hour by using the navigation arrows, and press SELECT to confirm. Do this again
to select the minute. To confirm, select YES then press the SELECT button.
FM Scan Strength
In FM Mode, press the on the remote, then use the navigation arrows until “FM Scan Strength” appears
onscreen. Press the SELECT button on the remote. Select the desired scan strength with the navigation
arrows, then press the SELECT button to confirm.