POINT 5-SERIES FS490WNE FRYSER Användarmanual

varumärke: POINT

Modell: 5-SERIES FS490WNE FRYSER

Kategori: Kylskåp

Typ: Användarmanual

FS490WNE

User Manual

UPRIGHT FREEZER

Thank you for purchasing your new POINT Upright Freezer. These

operating instructions will help you use it properly and safely. We

recommend that you spend some time reading this instruction manual

Read all the safety instructions carefully before use and keep this

instruction manual for future reference.

Takk for at du kjøpte ditt nye POINT stående fryser. Denne

bruksanvisningen vil hjelpe deg med å bruke den på en trygg og riktig

måte. Vi anbefaler at du tar deg tid til å lese gjennom hele

bruksanvisningen for å bli fortrolig med alle funksjonene som tilbys.

Les alle sikkerhetsanvisningene nøye før bruk, og oppbevar

bruksanvisningen for fremtidig referanse.

Kiitos, kun valitsit uuden POINT-pakastimen. Nämä käyttöohjeet

opastavat sinua käyttämään laitetta oikein ja turvallisesti.

Suosittelemme, että käytät hieman aikaa tämän käyttöoppaan

lukemiseen, jotta ymmärrät täysin, mitä toimintoja laitteessa on. Lue

kaikki turvallisuusohjeet huolellisesti ennen laitteen käyttöä ja säilytä

käyttöopas myöhempää tarvetta varten.

Tak for købet af dit nye fryser fra POINT. Disse brugervejledninger

hjælper dig med at bruge dette apparat rigtigt og sikkert. Vi anbefaler,

at du læser denne brugervejledning, så du får en fuld forståelse af

hvordan alle funktionerne virker. Læs sikkerhedsforskrifterne grundigt

inden brug, og gem denne brugervejledning til senere brug.

Tack för att du har köpt ditt nya stående frys från POINT. Denna

bruksanvisning hjälper dig att använda den på ett säkert och korrekt

sätt. Vi rekommenderar att du tar dig tid att läsa igenom denna

bruksanvisning för att till fullo förstå alla driftfunktioner som den

erbjuder. Läs noga igenom alla säkerhetsinstruktioner före användning

och spara bruksanvisningen för framtida bruk.

4 - 27

28 - 51

52 - 75

76 - 99

100 - 123

1. This appliance is intended to be used in household

farm houses and by clients in hotels, motels and other

residential type environments; bed and breakfast

type environments; catering and similar nonretail

applications.

2. This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they are supervised or instructed on

the use of the appliance by a person responsible for

their safety.

3. Children should be supervised to ensure that they do

not play with the appliance.

4. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly

qualiﬁed persons in order to avoid a hazard.

5. Do not store explosive substances such as aerosol

cans with a ﬂammable propellant in this appliance.

The appliance has to be unplugged after use and

before carrying out user maintenance on the

appliance.

6. Warning: Keep ventilation openings, in the appliance

enclosure or in the built-in structure, clear of obstruction.

Warning: risk of ﬁre/ ﬂammable materials

Warning 7. Warning: Do not use mechanical devices or other

means to accelerate the defrosting process, other

than those recommended by the manufacturer.

8. Warning: Do not damage the refrigerant circuit.

9. Warning: Do not use electrical appliances inside the

food storage compartments of the appliance, unless

they are of the type recommended by the

manufacturer.

10. Warning: Please discard the freezer according

to local regulators, since it uses ﬂammable gas and

refrigerant.

11. Warning: When positioning the appliance, ensure

the supply cord is not trapped or damaged.

12.

Warning: Do not place multiple portable socketoutlets

or portable power supplies at the rear of the

appliance.

13. Do not use extension cords or ungrounded (two

prong ) adapters.

14. Danger: Risk of child entrapment. Before you throw

away your old refrigerator or freezer:

- Leave the shelves in place so that children may not

easily climb inside.

15. The freezer must be disconnected from the

source of electrical supply before attempting the

installation of accessory.

16. The refrigerant and cyclopentane foaming material

used for the appliance are ﬂammable. Therefore, when

the appliance is scrapped, it has to be kept away from any

sources of ﬁre and be recovered by a special recovering

company with corresponding qualiﬁcation rather than

being disposed by combustion, so as to prevent damage

to the environment or any other harm.

17. For doors or lids ﬁtted with locks and keys, the keys

should be kept out of the reach of children and not in the

vicinity of the refrigerating appliance, in order to prevent

children from being locked inside

18. This appliance can be used by children 8 years and

older and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they are supervised or instructed on the safe use of the

appliance and understand the risks involved. Children are

not to play with the appliance. Cleaning and user

maintenance are not to be carried out by children without

supervision. Children aged from 3 to 8 years are allowed

to load and unload refrigerating appliances.

19. To avoid contamination of food, please respect the

following instructions:

- Opening the door for long periods can cause a signiﬁcant

increase of the temperature in the compartments of the

appliance.

- Regularly clean surfaces that can come in contact with

food and accessible drainage systems.

- Clean water tanks if they have not been used for

48 h; ﬂush the water system connected to a water

supply if water has not been drawn for 5 days.

(note 1)

- Store raw meat and ﬁsh in suitable containers in

the refrigerator, so that it is not in contact with or

drip onto other food.

- Two-star frozen-food compartments are suitable

for storing pre-frozen food, storing or making ice-

cream and making ice cubes. (note 2)

- One-, two- and three-star compartments are not

suitable for the freezing of fresh food. (note 3)

- For appliances without a 4-star compartment: this

refrigerating appliance is not suitable for freezing

- If the refrigerating appliance is left empty for long

door open to prevent mould developing within the

appliance.

Note 1,2,3,4: Please conﬁrm whether this is

applicable to your product.

20. For a freestanding appliance: this refrigerating

appliance is not intended to be used as a built-in

appliance.

21. Any replacement or maintenance of the LED lamps

is intended to be made by the manufacturer, its

service agent or similar qualiﬁed person. (See chapter

2.4 for lamp replacement).

8 9

Prohibition

symbols

Warning

symbols

Note

symbols

This manual contains lots of important safety information which

shall be observed by the users.

Do not pull the power cord when pulling the power

plug of the refrigerator. Please ﬁrmly grasp the plug

and pull it out from the socket directly.

To ensure safe use, do not damage the power cord

or use the power cord when it is damaged or worn.

Do not arbitrarily disassemble or reconstruct the

refrigerator, nor damage the refrigerant circuit;

maintenance of the appliance must be conducted

by a specialist.

Damaged power cord must be replaced by the

manufacturer, its maintenance department or related

professionals in order to avoid danger.

The gaps between refrigerator door and cabinet are

small, be noted not to put your hand in these areas to

prevent from squeezing your ﬁngers. Please be gentle

when closing the refrigerator door to avoid falling

articles.

Do not pick foods or containers in the freezer,

especially metal containers, with wet hands in order

to avoid frostbite.

Do not allow any child to get into or climb the

injure themselves by falling.

Do not place heavy objects on the top of the

refrigerator since the objects may fall when opening

the door, resulting accidental injuries.

Please use a dedicated power socket. The power

socket shall not be shared with other electrical

appliances. The power cord should be ﬁrmly contacted

with the socket or else ﬁres might be caused.

Please ensure that the grounding electrode of the

power socket is equipped with a reliable grounding

line.

1.2 Meaning of safety warning symbols

1.4 Warnings for using

1.3 Electricity related warnings

This is a prohibition symbol.

Any incompliance with instructions marked with this

symbol may result in damage to the product or

endanger the personal safety of the user.

This is a warning symbol.

It is required to operate in strict observance of

instructions marked with this symbol; or otherwise

damage to the product or personal injury may be

caused.

This is a cautioning symbol.

Instructions marked with this symbol require special

caution

injury, or damage to the product.

the gas valve ﬁrst, then open the doors and windows.

Do not unplug the refrigerator and other electrical

appliances since that might cause a spark that may

cause a ﬁre.

Do not use electrical appliances on the top of the

appliance, unless they are of the type recommended

by the manufacturer.

10 11

Do not put ﬂammable, explosive, volatile and highly

corrosive items in the refrigerator to prevent

damages to the product or ﬁre accidents.

Do not place ﬂammable items near the refrigerator

to avoid ﬁres.

The freezer is intended for household use, such

as storage of foods; it shall not be used for other

purposes, such as storage of blood, drugs or

biological products, etc.

1) Refrigerating appliances might not operate consistently (possibility

of defrosting of contents or temperature becoming too warm in the

frozen food compartment) when situated for an extended period of

time below the cold end of the range of temperatures for which the

refrigerating appliance is designed.

2) Sparkling drinks should not be stored in freezer compartments, and

some products, such as ice pops, should not be consumed too cold

3) Do not exceed the storage time(s) recommended by the food

manufacturers for any kind of food and particularly for commercially

quick-frozen food in freezer ;

4) Use necessary precautions to prevent an undue rise in the temperature

of the frozen food while defrosting the refrigerating appliance, such as

wrapping the frozen food in several layers of newspaper.

5) A rise in temperature of the frozen food during manual defrosting,

maintenance or cleaning could shorten the storage life.

6) For doors or lids ﬁtted with locks and keys, the keys should be kept out

of the reach of children and not in the vicinity of the refrigerating

appliance, in order to prevent children from being locked inside

1.5 Warnings related to placing items

1.6 Warnings for energy

The refrigerant and cyclopentane foaming material used for the

appliance are ﬂammable. Therefore, when the appliance is

scrapped, it has to be kept away from any sources of ﬁre and be

recovered by a special recovering company with corresponding

qualiﬁcation rather than being disposed by combustion, so as to

prevent damage to the environment or any other harm.

When the freezer is scrapped, disassemble the doors, and remove

the seal of the door and shelves; put the doors and shelves in a

proper place, so as to prevent trapping of any child.

Before use, remove all packing materials, including

bottom cushions, foam pads and tapes inside of the

and the freezer body.

Keep away from heat and avoid direct sunlight. Do not

place the freezer in moist or watery places to prevent

Do not spray or wash the freezer; do not put the

freezer in moist places easy to be splashed with

properties of the freezer.

1.7 Warnings for disposal

2 . Proper use of the freezer

2.1 Placement

Do not store beer, beverage or other ﬂuid contained

in bottles or enclosed containers in the freezer of the

appliance; or otherwise the bottles or enclosed

containers may crack due to freezing.

Screw hole cover

Screw hole

Screw

Precautions before installation:

Information in the Instruction Manual is only for reference. The

Before installation and adjusting of accessories, ensure that the

freezer is disconnected from power.

Precautions should be taken to prevent fall of the handle from

causing any personal injury.

2.2 Door handle installation

1312

Precautions should be taken to prevent fall of the handle from

causing any personal injury.

Cross screwdriver

List of tools to be provided by the user

(The picture above is only for reference. The actual conﬁguration will

depend on the physical product or statement by the distributor)

Assembly steps

a. Remove the screw hole caps from the door and use cross

screwdriver to ﬁx screws into the screw hole tightly.

b. Assemble the screw hole capon the screw hole of handle.

c. The reverse operation is for disassembly.

The freezer is to be placed in a well-ventilated indoor

place; the ground should be ﬂat, and sturdy (rotate left or

right to adjust the wheel for leveling if unstable).

This freezer needs to be installed independently and

cannot be used as a built-in. Otherwise, it will cause

problems such as failure to install into the cabinet, the

performance and life of the product are reduced. And the

manufacturer does not provide basic product warranty.

The space above the freezer has to be over 30cm, and

the freezer should be placed against a wall with a free

distance more than 10cm to facilitate heat dissipation.

Spare enough space for convenient opening of the doors

and drawers or follow the instructions of the distributor.

1514

(The picture above is only for reference. The actual conﬁguration will

depend on the physical product or statement by the distributor)

Adjusting procedures:

a. Turn the feet clockwise to raise the freezer;

b. Turn the feet counterclockwise to lower the freezer;

c. Adjust the right and left feet based on the procedures above to a

horizontal level.

2.3 levelling feet

2.4 Door Right-Left Change (optional)

List of tools to be provided by the user

Cross screwdriver

5/16" socket spanner

Putty knife

thin-blade screwdriver

Masking tape

4) Dismantle the door and right bottom hinge assembly(hinge shaft&

adjustable foot&hinge) and assemble the hinge shaft and adjustable

foot on the other side of hinge, then assemble the whole hinge

assembly on the other side of refrigerator.

3) Dismantle the upper hinge cover, screws and upper hinge, and remove

the hole cover from the other side.Unplug the wiring connector on the

right side of refrigerator top ( wiring connector).

hole cover hinge cover

2) Dismantle the screw hole caps ,screws and handle, and remove the

plastic screwhole caps from the other side.please refer to chapter 2.2.

hinge shaft

adjustable foot

the freezer, and remove all objects from the door trays.

16 17

5) Remove the door end cover, install the upper hinge sleeve and door

signal line to the other side and install the door end cover.

Dismantle the door stopper,sleeve pipe from the right bottom of door,

insert the sleeve pipe into hinge hole of left bottom of door, assemble

door stopper on left bottom of door.

6) Take out the left top hinge , left top hinge cover from accessories

package ,place the door on bottom hinge ,and mount left top hinge.

Connect signal line terminal with signal line terminal , connect

signal line terminal with signal line terminal ,mount top hinge

cover and hole cover.

door signal line

sleeve pipe

stopper

stopper screw

door end cover

7) For the assembly of the handle, please refer to chapter 2.2.

Any replacement or maintenance of the LED lamps is intended to be

made by the manufacturer, its service agent or similar qualiﬁed person.

(Above is only for reference. The actual conﬁguration will depend on the

physical product or statement by the distributor)

After transportation, please let the freezer stay

for more than 2 hours before turning on the

power, otherwise it will lead to a decrease in

cooling capacity or a damage to the freezer.

Before putting any fresh or frozen foods, the

freezer must run for 2-3 hours, or for above 4

hours in summer when the ambient

(Above is only for reference. The actual conﬁguration will depend on the

physical product or statement by the distributor)

2.5 Changing the Light (optional)

2.6 Starting

temperature is high. Please pull out plug in case of power failure or

cleaning. Do not connect the freezer to power supply within ﬁve minutes

to prevent damages to the compressor due to successive starts.

18 19

Refrigerating chamber

3.2 Functions

The appliance should be located in the coolest area of the room, away

from heat-producing appliances or heating ducts, and out of direct

sunlight.

3 . Structure and functions

3.1 key components

2.7 Energy saving tips

Let hot foods cool to room temperature before placing in the appliance.

Overloading the appliance forces the compressor to run longer. Foods

that freeze too slowly may lose quality, or spoil.

Be sure to wrap foods properly, and wipe containers dry before placing

them in the appliance. This cuts down on frost build-up inside the

appliance.

Organize and label food to reduce door openings and extended searches.

Remove as many items as needed at one time, and close the door as

soon as possible.

Shelf

Drawer

Two-star

compartment

Door tray

Appliance storage bin should not be lined with aluminum foil, wax paper,

or paper towels. Liners interfere with cold air circulation, making the

The Refrigerating Chamber is suitable for storage of a variety of fruits, vegeta-

bles, beverages and other food consume in the short term.

Cooked foods must not be put in the refrigerating chamber until cooled to room

temperature. Suggested storage time 3 to 5 days.

above.

Foods are recommended to be sealed up before putting into the refrigerator.

The glass shelves can be adjusted up or down for a reasonable amount of

storage space and easy use.

The cabinet freezer keeps food fresh for long periods of time. It is mainly used

for storing frozen foods and making ice cubes.

The freezer section is suitable for long-term storage of meat, ﬁsh and other

It is recommended to cut the meat into smaller pieces to speed up freezing and

make it easier to use. Note: Food should be used before it expires.

( The picture above is only for reference. The

actual conﬁguration wil depend on the

physical product or statement by the

distributor ) ( The picture above is only for reference. The actual conﬁguration wil depend on the

physical product or statement by the distributor )

Freezer

1) Key

A. Temperature setting button

B. Standby button

If no failure,the screen displays the setting temperature of the

freezer room.

Long press the standby button

Press the button for 3 seconds to achieve Fridge/Freezer

conversion, the corresponding temperature icons shine.

The temperature setting will be changed once you press button( ).

Then, the freezer will run according to the new temperature setting

after 15s.

Enter: under refrigerator mode, press the button( ) until the icon

lights up.

During quick cooling mode, the refrigerator runs according to the

temperature set at 2°C ,and it will exit this mode automatically after

running for 150 minutes or if the temperature or mode is set.

for 10 seconds to set the standby

On the occurrence of a failure, the corresponding icons will give a

combined blink:

the error codes and types are shown as follows:

2) Temperature icons

Setting 1: the setting temperature is 8 or -16°C

Refrigertor:

Error Code

E10

Error Description

Temperature sensor of Refrigerator room fail

Defrosting sensor of Refrigerator room fail

Communication error

Ambient temperature sensor fail

Sticking problem with Button

Display

Setting 2: the setting temperature is 6 or -18°C

Setting 3: the setting temperature is 4 or -20°C

Setting 4: the setting temperature is 3 or -22°C

Setting 5: the setting temperature is 2 or -24°C

Setting 6: quick cooling or quick freezing

Display of normal running

Standby function

Fridge/Freezer conversion

Temperature setting

Quick cooling mode

2120

Icon” ”& Icon ” 2 ” shine at same time

Icon” ”& Icon ” 3 ” shine at same time

Icon” ”& Icon ” 4 ” shine at same time

Icon” 2 ”& Icon ” 4 ” shine at same time

Icon” ”& Icon ” -24 ” shine at same time

Icon” 2 ”& Icon ” 3 ” shine at same time

Freezer:

Error Code

Error Description

Temperature sensor of Freezer room fail

Defrosting sensor of Freezer room fail

Communication error

Ambient temperature sensor fail

High temperature alarm in freezing chamber

Display

Icon” ”& Icon ” -22 ” shine at same time

Icon” ”& Icon ” -20 ” shine at same time

Icon” -24 ”& Icon ” -20 ” shine at same time

Icon” -24 ”& Icon ” -18 ” shine at same time

E10 Sticking problem with Button Icon” -24 ”& Icon ” -22 ” shine at same time

function.

setting1 setting2 setting3 setting4 setting5 setting6

Quick freezing mode

Enter:under freezer mode,press the button( ) until the icon

lights up.

During quick freeze mode,the freezer runs according to the temperature

set at -24°C, it will exit this mode automatically after running for 24

hours or if the temperature or mode is set.

3) When the freezer power is on:

All temperature icons shine within 3s after power on, for power on at the

ﬁrst time, the default set temperature is -20°C.

After that, every time you start the freezer, it will run based on the

After 30s of non-action, the indicator light goes out. When adjusting the

gear, you need to press the key“A” to light up the indicator, and then press

the key “A” again to adjust the gear.

4) Opening warning and alarm control

There is no door opening prompt tone; there is an open door alarm tone:

when the freezer door is not closed for two minutes after it is opened, the

buzzer will sound until the door is closed. Press the B button to cancel the

buzzer alarm. It is recommended to close the door in time.

22 23

Dust behind the freezer and on the ground

should be timely cleaned to improve the cooling

Check the door gasket regularly to make sure there

is no debris. Clean the door gasket with a soft

cloth dampened with soapy water or diluted

detergent.

The interior of the freezer should be cleaned regularly to avoid odor.

4. Maintenance and care of the appliance

4.1 Cleaning

Do not rinse directly with water or other liquids during cleaning to

Power failure: In case of power failure, even if it is in summer, foods

inside the appliance can be kept for several hours; during the power

failure, the times of door opening should be reduced, and no more

fresh food should be put into the appliance.

Long-time non-use: The appliance should be unplugged and then

cleaned; then the doors are to be left open to prevent odor.

Moving: Before the freezer is moved, take all objects inside out, ﬁx the

glass partitions, drawers etc. with tape, and tighten the levelling feet;

close the doors and ﬁx them with tape. During moving, the appliance

must not be laid upside down or horizontally, or be vibrated; the

inclination during movement must be no more than 45º.Do not hold

the door and hinge when moving this unit.

Please unplug the freezer for defrosting and cleaning.

The appliance should run continuously once it is

started. Generally, the operation of the appliance

should not be interrupted; otherwise the service life

may be impaired

4.2 Stop using

drinks , shelves, drawers, etc.

Use a soft cloth or sponge to clean the inside of the freezer, with two

tablespoons of baking soda and a quart of warm water. Then rinse with

water and wipe clean. After cleaning, open the door and let it dry

naturally before turning on the power.

or corners), it is recommended to wipe them regularly with a soft rag,

soft brush, etc. and when necessary, combined with some auxiliary

tools (such as thin sticks) to ensure there are no contaminants or

bacterial accumulation in these areas.

Do not use soap, detergent, scrub powder, spray cleaner, etc., as these

may cause odors in the interior of the freezer or contaminate food.

Clean the bottle frame, shelves and drawers with a soft cloth

dampened with soapy water or diluted detergent. Dry with a soft cloth

or dry naturally.

Wipe the outer surface of the freezer with a soft cloth dampened with

soapy water, detergent, etc., and then wipe dry.

Do not use hard brushes, clean steel balls, wire brushes, abrasives(such

as toothpastes), organic solvents (such as alcohol, acetone, lemon oil,

etc.), boiling water, acid or alkaline items, which may damage the

cooler surface and interior. Boiling water and organic solvents such as

benzene may deform or damage plastic parts.

24 25

Surface

condensation

Condensation on the exterior surface and door seals of the freezer is

normal when the ambient humidity is too high. Just wipe the

condensate with a clean towel.

Buzz: The compressor may produce buzzes during operation, and the

buzzes are loud particularly upon start or stop. This is normal.

Creak: Refrigerant ﬂowing inside of the appliance may produce creak,

which is normal.

Noise

Table 1 Climate classes

Class Symbol Ambient temperature range

°C

Extended temperate

Temperate

Subtropical

Tropical

+ 10 to + 32

+ 16 to + 32

+ 16 to + 38

+ 16 to + 43

Extended temperate: 'this refrigerating appliance is intended to be used at

ambient temperatures ranging from 10 °C to 32 °C';

temperate: 'this refrigerating appliance is intended to be used at ambient

temperatures ranging from 16 °C to 32 °C';

Subtropical: 'this refrigerating appliance is intended to be used at ambient

temperatures ranging from 16 °C to 38 °C';

Tropical: 'this refrigerating appliance is intended to be used at ambient

temperatures ranging from 16 °C to 43 °C';

If the freezer operates outside the climate class(ambient temperature

range)for which it is rated then it may not be able to maintain satisfactory

internal temperatures.

You may try to solve the following simple problems by yourself.

If they cannot be solved, please contact the after-sales department.

Not working

Check whether the appliance is connected to power or whether the

plug is in good contact

Check whether the voltage is too low

Check whether there is a power failure or partial circuits have tripped

Odor

Light not

working

Long-time

operation of the

compressor

Doors cannot be

properly closed

Loud noise

Gasket gap

Water pan

overﬂows

Overheating of

side wall

5. Troubleshooting

Odorous foods should be tightly wrapped

Check whether there is any rotten food

Clean the inside of the freezer

It is normal for the refrigerator to run for a long time in the

summer,when the ambient temperature is high

It is not recommended to keep too much food in the device

simultaneously

The food must be allowed to cool before putting it in the device

Doors are opened too often

Check whether the freezer is connected to power

supply and whether the illuminating light is damaged

Have the light replaced by a specialist

The door is stuck by food packages

Too much food is placed in the appliance

The freezer is tilted

Check whether the ﬂoor is level and whether the freezer is

placed stably

Check whether accessories are placed at proper locations

Remove foreign matters on the door seal

Heat the door seal and then cool it for restoration

(or blow it with an electrical drier or use a hot towel for heating)

There is too much food in the chamber or food stored

contains too much water resulting in heavy defrosting

The doors are not closed properly, resulting in frosting

due to entry of air and increased water due to defrosting

Heat dissipation of the built-in condenser via the housing,

which is normal When housing becomes hot due to high

ambient temperature, storage of too much food or

shutdown of the compressor is shut down, provide sound

ventilation to facilitate heat dissipation

26 27

ENVIRONMENTAL PROTECTION:

This product is marked with the symbol on the selective sorting of

waste electronic equipment. This means that this product must

not be disposed of with household waste but must be supported

by a system of selective collection in accordance with Directive

2012/19/EU. It will then be recycled or dismantled to minimize

impacts on the environment, electrical and electronic products are

potentially dangerous for the environment and human health due

to the presence of hazardous substances.For more information,

please contact your local or regional authorities.

Power International AS,

PO Box 523, N-1471 Lørenskog, Norway

Power Norge:

https://www.power.no/kundeservice/

T: 21 00 40 00

Power Danmark:

https://www.power.dk/kundeservice/

T: 70 33 80 80

Punkt 1 Danmark:

https://www.punkt1.dk/kundeservice/

T: 70 70 17 07

Power Finland:

https://www.power.ﬁ/tuki/asiakaspalvelu/

T: 0305 0305

Power Sverige:

https://www.power.se/kundservice/

T: 08 517 66 000

Special for new European standard

SPECIFICATION:

The ordered parts in the following table can be acquired from channel:

Model: FS490WNE

Climate Class: SN, N, ST, T

Rated Voltage: AC 220-240V

Rated Frequency: 50 Hz

Refrigerant: R600a (40 g)

Noise: 41 dB ( C )

Ordered Part

Thermostats

Temperature

Sensors

Printed Circuit

Boards

Light Sources

Door Handles

Door Hinges

Trays

Baskets

Door Gaskets

Provided by

Professional

maintenance personnel

Professional maintenance

personnel

Professional maintenance

personnel

Professional maintenance

personnel

Professional repairers

and ﬁnal users

Professional repairers

and ﬁnal users

Professional repairers and

ﬁnal users

Professional repairers and

ﬁnal users

Professional repairers and

ﬁnal users