Silvercrest SSOT 6 A1 Operating Instructions Manual

varumärke: Silvercrest

Modell: SSOT 6 A1

Kategori: Mätning

Typ: Operating Instructions Manual

Denna manual är också lämplig för

86673

FOREHEAD & EAR THERMOMETER SSOT 6 A1

FOREHEAD & EAR

THERMOMETER

Operating instructions

STIRN- UND OHR-

THERMOMETER

Bedienungsanleitung

PANN- OCH ÖRONTER-

MOMETER

Bruksanvisning

IAN 86673

GB / IE Operating instructions Page 1

SE Bruksanvisning Sidan 35

DE / AT / CH Bedienungsanleitung Seite 61

Before reading, unfold both pages containing illustrations and

familiarise yourself with all functions of the device.

Vik ut båda bildsidorna och ha den till hands när du läser igenom

anvisningarna och gör dig bekant med apparatens / maskinens

funktioner.

Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen

aus und machen Sie sich anschließend mit allen Funktionen des

Gerätes vertraut.

1 4 92 3

10 11

SET 12hr

(12/24)

SET 24hr

(12/24) SET hour SET minute

SET Year SET month SET day

SET sleep

disable

D E

F G

5 GB/IE

Introduction

Intended use ....................................................... Page 7

Scope of delivery ............................................... Page 8

Description of parts ............................................ Page 8

Technical data .................................................... Page 9

Safety

General safety instructions ................................ Page 11

Safety instructions ............................................... Page 13

Safety Instructions for the Battery ...................... Page 14

Before getting started

Removing the battery fuse ................................. Page 15

Operation

Setting the date / time (Fig. C)........................... Page 15

Temperature measurements ............................... Page 16

Measuring time (stopwatch mode) ................... Page 23

Functions / error analysis

Selecting the temperature unit ........................... Page 24

The memory function (memory mode) .................Page 24

Changing the battery

.......................................... Page 25

Problem-solving .................................................. Page 26

Cleaning and care ....................................... Page 28

Guarantee and Service ............................ Page 29

Disposal ............................................................. Page 31

Conformity ....................................................... Page 32

Table of Contents

IB_86673_SSOT6A1_LB3.indd 5IB_86673_SSOT6A1_LB3.indd 5 21.11.12 09:5121.11.12 09:51

6 GB/IE

The following pictograms are used in these

directions for use or on the device itself:

Read the directions for use!

Please observe the warning and

safety instructions!

Risk of explosion!

Direct current (type of current and voltage)

Milliampere

Danger to life and danger of accidents

for infants and children!

Medical device type B

2013-01

Year and month of manufacture

Dispose of the packaging and appliance

in an environmentally friendly way!

IB_86673_SSOT6A1_LB3.indd 6IB_86673_SSOT6A1_LB3.indd 6 21.11.12 09:5121.11.12 09:51

7 GB/IE

Introduction

Forehead & Ear Thermometer



Introduction

Congratulations on the purchase of your new

appliance. You have clearly decided in favour

of a quality product.

These operating instructions are a part of this product.

They contain important information in regard to safety,

use and disposal. Before starting the device up for the ﬁ rst

time, familiarise yourself with its functions. Read the follow-

ing directions for use. Please keep these instructions in a

safe place. When handing the device on to a third party,

hand all instructions on, too.



Intended use

The device is intended for use indoors for the measurement

of body temperature on the ear or temple / forehead, the

measurement of room temperature and the measurement

of surface temperatures in the household, as well as a

clock with stopwatch function. In no way does it replace

an examination by a qualiﬁ ed doctor. This appliance is

solely intended for private use. Any use other than that

previously described or any change to the product is not

permitted and may lead to injuries and / or damage to the

product. The manufacturer does not assume any liability

for damage arising from improper use.

IB_86673_SSOT6A1_LB3.indd 7IB_86673_SSOT6A1_LB3.indd 7 21.11.12 09:5121.11.12 09:51

8 GB/IE

Introduction



Scope of delivery

1 x Forehead and ear thermometer

(incl. battery and protective head guard

)

1 x Directions for use



Description of parts

“MEM / SET” button

(information retrieval from the memory etc.)

Measuring head

“EAR” button

(temperature measurement in the ear / scan mode)

“FOREHEAD” button

(temperature measurement on the forehead / temple)

LC display

LED red: fever 38.0 °C - 42.9 °C (100.4 °F - 109.2 °F)

LED orange: slight increase in temperature

37.5 °C - 37.9 °C (99.5 °F - 100.2 °F)

LED green: no fever 34.0 °C - 37.4 °C

(93.2 °F - 99.3 °F)

Protective head guard

Battery compartment lid

Battery

IB_86673_SSOT6A1_LB3.indd 8IB_86673_SSOT6A1_LB3.indd 8 21.11.12 09:5121.11.12 09:51

9 GB/IE

Introduction

LC display

Battery change symbol

Year display symbol

Date display symbol

Ear mode symbol

Standard mode symbol

Scan mode symbol

Temperature display

Forehead mode symbol

Sleep mode symbol

Setup mode symbol

Memory mode symbol

PM / AM display

Month and hour in standard mode

Stopwatch mode symbol



Technical data

Measurement

method: Infrared (non-contact)

Electrical

power supply: Lithium battery 3 V

CR2032

Power consumption: < 30 mA

Memory: 9 temperature measurements with

details of date, time and measurement

method (ear or forehead measurement)

IB_86673_SSOT6A1_LB3.indd 9IB_86673_SSOT6A1_LB3.indd 9 21.11.12 09:5121.11.12 09:51

10 GB/IE

Introduction

Temperature scale: °C (°Celsius)

°F (°Fahrenheit)

Time display: 12 / 24-hour format

Automatic switch-oﬀ : Automatic switch-oﬀ after 1 minute

Measurement range

forehead & ear mode: 32°C - 42.9°C (89.6°F - 109.2°F)

Measurement

accuracies: ± 0.2°C (± 0.4°F) in the range

from 35.5°C - 42.0°C

(95.9°F - 107.6°F)

± 0.3°C (± 0.5°F) in the range from

32.0°C - 35.4°C (89.6°F - 95.7°F)

and in the range from 42.1°C -

42.9°C (107.8°F - 109.2°F)

Measurement range

room temperature: 5.0°C - 59°C (41.0°F - 138.2°F)

Measurement

accuracy: ± 2.0°C (± 4.0°F)

Measurement

range scan mode: –22.0°C - 80.0°C

(–7.6°F - 176°F)

Measurement

accuracy: ± 2.0°C (± 4.0°F)

Ambient temperature

Ear and scan mode: +10.0 °C - +40.0 °C

(50.0 °F - 104.0 °F)

Forehead mode: +15.0 °C - +40.0 °C

(59.0 °F - 104.0 °F)

IB_86673_SSOT6A1_LB3.indd 10IB_86673_SSOT6A1_LB3.indd 10 21.11.12 09:5121.11.12 09:51

11 GB/IE

Introduction / Safety

Storage temperature: –10.0 °C - +55.0 °C

(14.0°F - 131.0°F) at

20 % RH* - 85 % RH*

Atmospheric pressure: 700

1060 hPa

Dimensions: approx. 135 x 37 x 58 mm (L x B x H)

Weight: approx. 50 g

*RH = relative humidity



Safety

PLEASE KEEP ALL SAFETY INFORMATION

AND INSTRUCTIONS FOR FUTURE USE!

General safety instructions



WARNING!

DANGER TO LIFE

AND DANGER OF ACCIDENTS FOR

INFANTS AND CHILDREN! Never leave

children alone and unsupervised with the packaging

material. Danger of suﬀ ocation. Children often

underestimate risks. Always keep children away

from the product.

 DANGER TO LIFE! Batteries can be swallowed,

which may represent a danger to life. If a battery has

been swallowed, medical help is required immediately.

IB_86673_SSOT6A1_LB3.indd 11IB_86673_SSOT6A1_LB3.indd 11 21.11.12 09:5121.11.12 09:51

12 GB/IE

Safety

 This device is not designed to be used by people

(including children) with limited physical, sensory or

mental abilities or who lack the experience and / or

knowledge to use it, unless they are supervised by a

person responsible for safety or receive instructions

from such a person as to how the device should be

used. Children have to be supervised to ensure that

they do not play with the device.

 Do not expose the device to

- extreme temperatures,

- strong vibrations,

- heavy mechanical loads,

- direct sunlight.

Otherwise there is a danger that the device will be

damaged.

 Please note that the guarantee does not cover damage

caused by incorrect handling, non-compliance with the

operating instructions or interference with the device

by unauthorised individuals.

 Under no circumstances should you take the device

apart. Improper repairs may place the user in consider-

able danger. Repairs should only be carried out by

specialist personnel.

 Do not use the device if it is damaged. Otherwise

the consequence may be injuries and / or inaccurate

readings.

IB_86673_SSOT6A1_LB3.indd 12IB_86673_SSOT6A1_LB3.indd 12 21.11.12 09:5121.11.12 09:51

13 GB/IE

Safety

 Please consult a doctor if the thermometer indicates

that the body temperature measured is high. With this

measuring method, a fever is indicated if the tempera-

ture is above 38.0 °C (100.4 °F). The red LED

is a

warning. Please take several measurements at intervals

of 0.5 to 1 hour in order to follow the progression of

the temperature. The values you measure will help

your doctor make a diagnosis.

 Do not use the temperature under extreme temperature

conditions and / or outdoors. This will result in inaccurate

measuring results. Please observe the details regarding

ambient and storage temperatures (see “Technical data”).

 The measurement sensor should not be touched directly

or be blown on. This will result in inaccurate measuring

results.

 Mobile telephones should not be used in the immediate

vicinity when the thermometer is being used. Otherwise

the consequence may be inaccurate measurement

results.

Safety instructions

 This appliance is solely intended for private use. That

is why it is not subject to mandatory veriﬁ cation.

 Discontinue using the appliance if it is damaged or if

you feel that the measured values are unrealistic. Con-

sult the chapter “Functions/Error analysis - Trouble-

shooting” for advice or contact our service centre.

IB_86673_SSOT6A1_LB3.indd 13IB_86673_SSOT6A1_LB3.indd 13 21.11.12 09:5121.11.12 09:51

14 GB/IE

Safety

Safety Instructions

for the Battery

 Remove the battery from the device if it is not going

to be used for a prolonged period.



CAUTION! DANGER OF EXPLOSION!

The battery must never be recharged!

 Ensure correct polarity when inserting the battery!

This is indicated in the battery compartment.

 If necessary, clean the battery and device contacts

before inserting the battery.

 Batteries must not be disposed of in the normal

domestic waste!

 Every consumer is legally obliged to dispose

of batteries in the proper manner!

 CAUTION! RISK OF EXPLOSION!

Keep batteries away from children; do not

throw batteries into a ﬁ re; do not short-circuit

the batteries and do not take them apart.

 Avoid contact with the skin, eyes and mucous mem-

branes. Any parts of the body coming into contact with

battery acid should be rinsed oﬀ with copious amounts

of water and / or a doctor contacted if necessary!

 Avoid contact with skin, eyes and mucous membranes.

Upon contact with battery acid, rinse the aﬀ ected

area with lots of water and / or consult a doctor!

IB_86673_SSOT6A1_LB3.indd 14IB_86673_SSOT6A1_LB3.indd 14 21.11.12 09:5121.11.12 09:51

15 GB/IE

Before getting started / Operation



Before getting started



Removing the battery fuse

 Push the battery compartment lid

downwards.

 Pull the tab of the protective ﬁ lm out of the battery

compartment.

 Push the battery compartment lid

onto the battery

compartment until it clicks into place (Fig. A).

– When it is switched on, an internal alignment and a

self-test of the LC display are carried out.

– To verify that all of the bars of the numbers are being

managed correctly, when you switch on check the

display of the LC display

on your appliance

against the example (Fig. B).



Operation



Setting the date / time (Fig. C)

You only have to set the date and time when you operate

the appliance for the ﬁ rst time and after you change the

battery.

1. Press and hold the “MEM / SET” button

down for

two seconds in standard mode. An acoustic signal

will sound. The device is now in set-up mode.

2. Press the “MEM / SET” button

to choose between

the 12-hour or 24-hour format.

IB_86673_SSOT6A1_LB3.indd 15IB_86673_SSOT6A1_LB3.indd 15 21.11.12 09:5121.11.12 09:51

16 GB/IE

Operation

3. Press the “FOREHEAD” button

. The hours will ﬂ ash

and can be corrected with the “MEM / SET” button

4. Press the “FOREHEAD” button

again. The minutes

will ﬂ ash and can be corrected with the “MEM / SET”

button

 Repeat steps 3 and 4 to set the values for the year,

month and day or to switch the sleep mode on or oﬀ .

 Finally, press the “FOREHEAD” button

. The settings

will be taken over and the appliance reverts to stand-

ard mode.



Temperature measurements

Measuring room temperature (standard mode)

When you have ﬁ nished setting the time and date and do

not carry out any further procedures, the device switches

to sleep mode after 1 minute in order to save the battery.

In the condition as supplied to the customer the sleep

mode is activated, as shown by the

symbol, and the LC

display

is completely switched oﬀ . When the sleep

mode is deactivated, the device remains switched on,

while the time and room temperature are still shown and

updated once a minute. The LC display

shows

the time and date alternately (Illustration D).

Measuring body temperature (ear mode)

 IMPORTANT! It is advisable to carry out 3 meas-

urements in a row on the same ear and to take the highest

temperature as the measured value. A new measurement

IB_86673_SSOT6A1_LB3.indd 16IB_86673_SSOT6A1_LB3.indd 16 21.11.12 09:5121.11.12 09:51

17 GB/IE

Operation

can be taken when the display “ ” goes out.

 Do not use the thermometer if pain occurs when the meas-

urement is being taken. This could damage the ear canal.

 Do not use the thermometer with external ear disorders

(e.g. inﬂ ammation of the ear canal, injuries to the outer

ear). The condition of the aﬀ ected areas could worsen.

 Do not use the thermometer straight after bathing or

swimming when the ear canal is wet. This could dam-

age the ear canal.

 Due to the risk of contamination of the measuring

head, clean the appliance after every use.

 In this mode, only measure the temperature in the ear

and at no other place on the body.

1. If the sleep mode has been activated, activate the

thermometer again by pressing any button before

taking the measurement.

2. Carefully press on the protective cap

and remove

it with a gentle rotary motion and without using any

force.

3. Check that the measuring head

and the measuring

sensors are clean.

4. Carefully clean the ear canal with a cotton bud.

5. Pull the outer ear, tilted slightly upwards/to the rear,

towards the back of his head, so that the ear canal is

freely accessible and there are no impediments be-

tween the measurement sensor and the eardrum.

IB_86673_SSOT6A1_LB3.indd 17IB_86673_SSOT6A1_LB3.indd 17 21.11.12 09:5121.11.12 09:51

18 GB/IE

Operation

6. Please keep the outer ear slightly extended and now

carefully insert the measuring head

into the ear canal.

7. Brieﬂ y press the “EAR” button

. The symbol will

appear in the LC display

and the measurement

will start after an acoustic signal.

8. The end of the measurement is indicated by means of

2 acoustic signals.

9. Now you can read oﬀ the measurement result on the

LC display

. At the same time, one of the 3 LEDs

will come on.

Note: LED green

: no fever 34.0 °C - 37.4 °C

(93.2 °F - 99.3 °F)

LED orange

: slight increase in temperature

37.5 °C - 37.9 °C (99.5 °F - 100.2 °F)

LED red

: fever 38.0 °C - 42.9 °C

(100.4 °F - 109.2 °F)

10. Values can be displayed in °C as well as in °F

(see “Functions / error analysis - selecting the

temperature unit”).

11. Wait until the display “

” goes out before you

start taking a new measurement.

Note: The appliance automatically switches oﬀ if it is not

operated for longer than 1 minute. When the sleep mode

has been activated, the LC display

switches itself oﬀ .

When the sleep mode has been deactivated, the appliance

switches to standard mode. If the thermometer has been

operated under normal conditions, the result of the last

measurement taken before the appliance was switched oﬀ

IB_86673_SSOT6A1_LB3.indd 18IB_86673_SSOT6A1_LB3.indd 18 21.11.12 09:5121.11.12 09:51

19 GB/IE

Operation

is stored. The measured value is available again along

with information on the date, time and measurement mode

when the “MEM / SET” button

is pressed again. The

device has 9 storage spaces (see section on “Functions /

error analysis - the memory function”).

Measuring the body temperature

(forehead mode)

 IMPORTANT! It is advisable to carry out 3 meas-

urements in a row at the same place and to take the

highest temperature as the measured value.

 With diﬀ erent room temperatures, let the appliance

lie in the room where the temperature is to be taken

for at least 30 minutes to “acclimatise” it.

 Before measuring your body temperature, you should

relax for about 5 minutes.

 If you have done any physical activity or taken a

bath, wait for at least 30 minutes before taking a

measurement in order to get a measurement that is

as accurate as possible.

 Ensure that the forehead or temple is clean, free of

injuries and not covered with sweat, cosmetics or

ointment.

Take a note of what measurement method you used to

measure the temperature and inform your doctor of it.

1. If the sleep mode has been activated, activate the

thermometer again by pressing any button before

taking the measurement.

IB_86673_SSOT6A1_LB3.indd 19IB_86673_SSOT6A1_LB3.indd 19 21.11.12 09:5121.11.12 09:51

20 GB/IE

Operation

2. Carefully press on the protective cap

and remove

it with a gentle rotary motion and without using any

force.

3. Check that the measuring head

and the measuring

sensors are clean.

4. Hold the measuring sensor 1 cm away from the

forehead or temple.

5. To start the measurement, press on the “FOREHEAD”

button

. The symbol will appear in the LC display

and the measurement will start after an acoustic

signal.

6. The end of the measurement is indicated by 2 acoustic

signals.

7. Now you can read oﬀ the measurement result on the

LC display

. At the same time, one of the 3 LEDs

will come on.

Note: LED green

no fever 34.0 °C - 37.4 °C

(93.2 °F - 99.3 °F)

LED orange

slight increase in temperature

37.5 °C - 37.9 °C (99.5 °F - 100.2 °F)

LED red fever

38.0 °C - 42.9 °C

(100.4 °F - 109.2 °F)

8. Values can be displayed in °C as well as in °F

(see “Functions / error analysis - selecting the

temperature unit”).

9. Repeat steps 3 to 6 to carry out further measurements.

IB_86673_SSOT6A1_LB3.indd 20IB_86673_SSOT6A1_LB3.indd 20 21.11.12 09:5121.11.12 09:51

Sidan laddas ...

Silvercrest SSOT 6 A1 Operating Instructions Manual

varumärke: Silvercrest

Modell: SSOT 6 A1

Kategori: Mätning

Typ: Operating Instructions Manual

Denna manual är också lämplig för

86673

Ladda ner pdf

Rapportera

på andra språk

Deutsch: Silvercrest SSOT 6 A1
English: Silvercrest SSOT 6 A1

Silvercrest SSOT 6 A1 Operating Instructions Manual

Denna manual är också lämplig för

Silvercrest SSOT 6 A1 Operating Instructions Manual

på andra språk

Andra dokument