Oregon Scientific OSRGR126N Användarmanual

EN

1

Remote Rain Gauge

with Outdoor Thermometer

Model: RGR126N

USER MANUAL

RGR126N_EU_COVER_R2.indd 1 2014/8/6 3:17:32 PM

EN

1

Remote Rain Gauge

with Outdoor Thermometer

Model: RGR126N

USER MANUAL

CONTENTS

Packaging contents ................................................. 2

Introduction .............................................................. 2

Overview ................................................................... 2

Front View ............................................................ 2

Rear View ............................................................ 3

LCD display ......................................................... 3

Remote sensor (THN802) ................................... 4

Rain gague (PCR800) ......................................... 5

Getting started ......................................................... 5

Main unit - batteries installation .......................... 5

Remote sensor - Insert batteries ........................ 6

Remote sensor ........................................................ 6

Sensor data transmission ................................... 6

Rain gauge ............................................................... 7

Signals ................................................................. 8

Clock ........................................................................ 8

Manually set clock ............................................... 8

Rainfall ..................................................................... 8

Rainfall history .................................................... 8

Total rainfall ....... ...................................................9

Rainfall alert ..........................................................9

Temperature ............................................................. 9

Reset ....................................................................... 9

Precautions ............................................................ 10

Specifications ........................................................ 10

About Oregon Scientific .........................................11

EU - Declaration of Conformity ............................. 11

FCC Statement .........................................................11

Declaration of Conformity ......................................12

EN

2

3

PACKAGING CONTENTS

Main Unit Rain Gauge

Thermo Sensor Thermo Sensor Table Stand

INTRODUCTION

Thanks for purchasing the Oregon Scientific

TM

Remote

Rain Gauge with Outdoor Thermometer (RGR126N).

NOTE

Please keep this manual handy as you use

your new product. It contains practical step-by-step

instructions, as well as technical specifications and

warnings you should know about.

OVERVIEW

FRONT VIEW

1. Four-line LCD display: for displaying the total

rainfall, current rainfall or rainfall history, indoor/

outdoor temperature and clock/calendar.

2. UP: increase setting values; press and hold for

rapid increase;

3. HIST: toggle between rainfall history and daily rainfall

4. SINCE: press to review the date when the

measurement started. Press and hold to clear the

previous rainfall start time and reset the rainfall

counter to start again.

1

2

3

4

5

6

7

8

2

EN

3

OVERVIEW

FRONT VIEW

1. Four-line LCD display: for displaying the total

rainfall, current rainfall or rainfall history, indoor/

outdoor temperature and clock/calendar.

2. UP: increase setting values; press and hold for

rapid increase;

3. HIST: toggle between rainfall history and daily rainfall

4. SINCE: press to review the date when the

measurement started. Press and hold to clear the

previous rainfall start time and reset the rainfall

counter to start again.

5. DOWN: decrease setting values: press and hold

for rapid decrease

6. SEARCH: press and hold to enforce a search for

the rain gauge and remote thermo sensor

7. MODE: change setting/clock display

8. Removable table stand: for securing the main unit

on a at surface

REAR VIEW

1. Antenna: receives radio signal from rain gauge

and remote thermo sensor

2. Wall mount hole

3. RAIN ALERT: an alert for excessive rain

In/mm: inch/millimeter (rain rate unit)

˚C/˚F: temperature unit

4. Battery compartment

5. RESET: reset the unit to default settings

LCD DISPLAY

1. TODAY: today’s rainfall indicator

2. Indicates on which previous day (1-9) is the displayed

data recorded

1

2

3 5

4

1

11

12

13

14

15

16

17

2

3

4

5

6

7

8

9

10

EN

4

5

3. Rainfall alert indicator

4. : remote rain gauge sensor battery low

5. : rain gauge RF reception status

6. TOTAL: rainfall indicator

7. : outdoor thermo RF reception status

8. : outdoor remote sensor battery low

9. AM/PM

10. : main unit battery low

11. mm/in: millimeter/inch (rain rate unit)

12. Today’s rainfall

13. mm/in: millimeter/inch (rain rate unit)

14. Total rainfall

15. Outdoor temperature

16. SINCE: start date of the accumulated rainfall Yr: year

17. Time display; M:D (month: day); D:M (day: month);

calendar

REMOTE SENSOR (THN802)

1. LED status indicator

2. Wall mount hole

3. RESET hole

4. CHANNEL switch (1,2,3)

5. Battery compartment

RAIN GAGUE (PCR800)

1. Rain gauge

2. Battery compartment

3. RESET button

1. Funnel

2. Indicator

1

2

3

4

5

4

EN

5

RAIN GAGUE (PCR800)

1. Rain gauge

2. Battery compartment

3. RESET button

1. Funnel

2. Indicator

GETTING STARTED

Position the main unit, rain gauge, and thermo sensor

within effective range:

• Rain gauge – 100 meters/329 feet

• Thermo sensor – 100 meters/329 feet

IMPORTANT

It is recommended that you follow the

sequence below while setting up the units:

1. Set up the main unit.

2. Set up the rain gauge, then press and hold SEARCH

on the main unit and wait until you receive a signal.

3. Set up the thermo sensor, then press and hold

SEARCH on the main unit and wait until you receive

a signal.

4. In the event that you do not obtain a signal from a

remote unit please repeat the process above.

MAIN UNIT - BATTERIES INSTALLATION

1

2

3

1

2

3

1

2

EN

6

7

1. Insert the batteries, matching the polarity (+/-) as

shown in the battery compartment.

2. Press RESET, or press and hold SEARCH on the

main unit to initiate operation. The reception icons

( and ) on the main unit will blink while it is

searching for the sensor or rain gauge.

NOTE

The main unit returns to default settings in each

battery replacement.

REMOTE SENSOR - INSERT BATTERIES

1. Remove the battery compartment cover by screw driver.

2. Insert the batteries, matching the polarities (+/-).

3. Press RESET after each battery change.

LOCATION

MEANING

Rainfall area

Rain collector sensor

batteries low

Outdoor temperature area Outdoor sensor batteries low

Clock area Main unit batteries low

NOTE

Use alkaline batteries for longer usage and consumer

grade lithium batteries in temperatures below freezing.

REMOTE SENSOR

The main unit can collect data from up to two (2) sensors,

including one rain gauge and one outdoor thermo sensor.

To set up the sensor:

1. Open the battery compartment.

2. Select a channel then press RESET.

3. Close the battery compartment cover.

4. Place the sensor within 100 m (329 ft) of the main

unit using the table stand or wall mount.

TIP

For accurate readings, ideal

placements for the sensor would

be in any location on the exterior

of the home at a height of no

more than 1.5 m (5 ft); and can

shielded it from direct sunlight or

wet conditions.

SENSOR DATA TRANSMISSION

To search for a sensor:

• Press and hold SEARCH.

• The sensor reception icon in the remote sensor

area shows the status (see below).

ICON DESCRIPTION

Main unit is searching for

sensor(s).

A channel has been found.

The sensor cannot be found.

The transmission range may vary depending on

many factors. You may need to place the sensor(s) in

different locations to get the best result.

RAIN GAUGE

The rain gauge collects rain and takes readings of rainfall

rate and the total rainfall over a period of time. The sensor

can remotely transmit data to the main unit.

The main unit and rain gauge should be positioned

within an effective range: about 100 m (329 ft) in an

open area.

The rain gauge should be mounted horizontally about

one meter (three feet) from the ground in an open area

away from tress or other obstructions to allow rain to fall

naturally for an accurate reading.

150cm(5ft)

6

EN

7

Use alkaline batteries for longer usage and consumer

grade lithium batteries in temperatures below freezing.

REMOTE SENSOR

The main unit can collect data from up to two (2) sensors,

including one rain gauge and one outdoor thermo sensor.

To set up the sensor:

1. Open the battery compartment.

2. Select a channel then press RESET.

3. Close the battery compartment cover.

4. Place the sensor within 100 m (329 ft) of the main

unit using the table stand or wall mount.

For accurate readings, ideal

placements for the sensor would

be in any location on the exterior

of the home at a height of no

more than 1.5 m (5 ft); and can

shielded it from direct sunlight or

wet conditions.

SENSOR DATA TRANSMISSION

To search for a sensor:

• Press and hold SEARCH.

• The sensor reception icon in the remote sensor

area shows the status (see below).

ICON DESCRIPTION

Main unit is searching for

sensor(s).

A channel has been found.

The sensor cannot be found.

TIP

The transmission range may vary depending on

many factors. You may need to place the sensor(s) in

different locations to get the best result.

RAIN GAUGE

The rain gauge collects rain and takes readings of rainfall

rate and the total rainfall over a period of time. The sensor

can remotely transmit data to the main unit.

The main unit and rain gauge should be positioned

within an effective range: about 100 m (329 ft) in an

open area.

The rain gauge should be mounted horizontally about

one meter (three feet) from the ground in an open area

away from tress or other obstructions to allow rain to fall

naturally for an accurate reading.

To set up a rain gauge:

1. Remove screws and slide the cover off in an

upwards motion,

2. Insert the batteries (2 x UM-3/AA), matching

the polarities (+/-). Press RESET after each

battery change.

3. Remove the ber tape.

To ensure a level plane:

Put a few drops of water on the cross at the base of the

funnel to check the horizontal level.

Water will pool to the center of the cross when the rain

gauge is level.

If water remains on 1-4, the gauge is not horizontal.

If necessary, adjust the level using the screw.

1

23

4

3

2

1

EN

8

9

NOTE

For best results, ensure the base is horizontal to

allow maximum drainage of any collected rain.

SIGNALS

To search for the rain collector:

• Press and hold SEARCH.

The remote rain collector reception indicator in the rainfall

area shows the status:

ICON DESCRIPTION

No signal.

Searching for

signal.

Signal connected.

TIP

The transmission range may vary depending on

many factors. You may need to place the sensor(s) in

different locations to get the best result.

CLOCK

MANUALLY SET CLOCK

1. Press and hold MODE.

2. Press UP or DOWN to change the settings.

3. Press MODE to conrm.

4. The settings order is: 12/24 hr format, hour, minute,

year, calendar mode (day-month/month-day),

month, day and language.

NOTE

The language options are English (E),

German (D), French (F), Italian (I), and Spanish (S).

To select display mode:

• Press MODE to choose between clock with

seconds/weekday/calendar.

RAINFALL

Today’s rainfall appears on the first line of the display.

Press in/mm to toggle between inches and millimeters.

RAINFALL HISTORY

The rainfall history is displayed on the first row of the

display. The main unit can record and store up to nine

days of rainfall.

To display the record for a particular day:

• Press HIST to toggle

between daily rainfall

and rainfall history over

the past nine days. The

day of the record will be

displayed with a minus

(-) sign at the top left

hand corner. TODAY

means the record is for

the current day.

Other sensors using the 433 MHz transmission

frequency may influence the rainfall reading. Please avoid

placing those sensors too close to the unit.

TOTAL RAINFALL

The total rainfall is displayed on the second line of

the display.

To display the commencing date of the total

rainfall record:

• Press SINCE. The date when the measurement

started will appear on the bottom line of the display.

To clear the existing commencing date and reset it

to start again:

• Press and hold SINCE. The total rainfall will be

reset to zero and then collect the rainfall data

starting from today.

(flash)

8

EN

9

CLOCK

MANUALLY SET CLOCK

1. Press and hold MODE.

2. Press UP or DOWN to change the settings.

3. Press MODE to conrm.

4. The settings order is: 12/24 hr format, hour, minute,

year, calendar mode (day-month/month-day),

month, day and language.

The language options are English (E),

German (D), French (F), Italian (I), and Spanish (S).

To select display mode:

• Press MODE to choose between clock with

seconds/weekday/calendar.

RAINFALL

Today’s rainfall appears on the first line of the display.

Press in/mm to toggle between inches and millimeters.

RAINFALL HISTORY

The rainfall history is displayed on the first row of the

display. The main unit can record and store up to nine

days of rainfall.

To display the record for a particular day:

• Press HIST to toggle

between daily rainfall

and rainfall history over

the past nine days. The

day of the record will be

displayed with a minus

(-) sign at the top left

hand corner. TODAY

means the record is for

the current day.

NOTE

Other sensors using the 433 MHz transmission

frequency may influence the rainfall reading. Please avoid

placing those sensors too close to the unit.

TOTAL RAINFALL

The total rainfall is displayed on the second line of

the display.

To display the commencing date of the total

rainfall record:

• Press SINCE. The date when the measurement

started will appear on the bottom line of the display.

To clear the existing commencing date and reset it

to start again:

• Press and hold SINCE. The total rainfall will be

reset to zero and then collect the rainfall data

starting from today.

RAINFALL ALERT

To set the rainfall alert value:

1. Press and hold RAIN ALERT to enter setting mode.

2. Press UP or DOWN to toggle values.

3. Press RAIN ALERT to conrm. indicates rainfall

alert function is enabled.

To deactivate rainfall alert:

• The rainfall alert will be activated when the rainfall is

equal to or more than the rainfall alert value; will

ash continuously.

• To deactivate the rainfall alert, press RAIN ALERT

twice and wait for 8 seconds, or increase the

rainfall alert value.

TEMPERATURE

To toggle temperature unit:

• Press between ˚C / ˚F.

RESET

Press RESET to return to the default settings.

NOTE

The main unit returns to default settings in each

battery replacement.

EN

10

11

PRECAUTIONS

• Do not subject the unit to excessive force, shock,

dust, temperature or humidity.

• Do not cover the ventilation holes with any items

such as newspapers, curtains, etc.

• Do not immerse the unit in water. If you spill liquid

over it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive materials.

• Do not tamper with the unit’s internal components.

This invalidates the warranty.

• Only use fresh batteries. Do not mix new and old

batteries.

• mages shown in this manual may differ from the

actual display.

• When disposing of this product, ensure it is

collected separately for special treatment and not

as household waste.

• Placement of this product on certain types of

wood may result in damage to its nish for which

Oregon Scientic will not be responsible. Consult

the furniture manufacturer's care instructions for

information.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal

waste. Collection of such waste separately for

special treatment is necessary.

• Please note that some units are equipped with a

battery safety strip. Remove the strip from the

battery compartment before rst use.

NOTE

The technical specifications for this product and

the contents of the user manual are subject to change

without notice.

NOTE

Features and accessories will not be available

in all countries. For more information, please contact

your local retailer.

SPECIFICATIONS

TYPE DESCRIPTION

MAIN UNIT

Dimensions

(L x W x H)

93 x 68 x 30mm

(3.66 x 2.68 x 1.18 in)

Weight

96g (3.39 ounces)

including battery

Temperature range

-5°C to 50°C

(23°F to 122°F)

Temperature resolution 0.1°C (0.2°F)

Signal frequency 433 MHz

Power

2 x UM-3(AA) 1.5V

batteries

REMOTE THERMO SENSOR (THN802)

Dimensions

(L x W x H)

96 x 50 x 22mm

(3.78 x 1.97 x 0.87 in)

Weight 62g (2.22 ounces)

RF transmission range 100 meters (329 feet)

Temperature range -30°C to 60°C

Temperature resolution 0.1°C (0.2°F)

Number of channel 3

Power

2 x UM-4 (AAA) 1.5V

batteries

REMOTE RAIN GAUGE (PCR800)

Dimensions

L x W x H

114 x 114 x 145 mm

(4.5 x 4.5 x 5.7 inches)

Weight

241 g (8.5 oz)

without battery

Transmission range 100m (329 ft) unobstructed

Power 2 x UM-3 (AA) 1.5V

ABOUT OREGON SCIENTIFIC

Visit our website www.oregonscientic.com to learn more

about Oregon Scientic products.

For any enquiry, please contact our Customer Services at

info@oregonscientic.com.

Oregon Scientic Global Distribution Limited reserves

the right to interpret and construe any contents, terms

and provisions in this user manual and to amend it, at

10

EN

11

• Please note that some units are equipped with a

battery safety strip. Remove the strip from the

battery compartment before rst use.

The technical specifications for this product and

the contents of the user manual are subject to change

without notice.

Features and accessories will not be available

in all countries. For more information, please contact

your local retailer.

SPECIFICATIONS

TYPE DESCRIPTION

MAIN UNIT

Dimensions

(L x W x H)

93 x 68 x 30mm

(3.66 x 2.68 x 1.18 in)

Weight

96g (3.39 ounces)

including battery

Temperature range

-5°C to 50°C

(23°F to 122°F)

Temperature resolution 0.1°C (0.2°F)

Signal frequency 433 MHz

Power

2 x UM-3(AA) 1.5V

batteries

REMOTE THERMO SENSOR (THN802)

Dimensions

(L x W x H)

96 x 50 x 22mm

(3.78 x 1.97 x 0.87 in)

Weight 62g (2.22 ounces)

RF transmission range 100 meters (329 feet)

Temperature range -30°C to 60°C

Temperature resolution 0.1°C (0.2°F)

Number of channel 3

Power

2 x UM-4 (AAA) 1.5V

batteries

REMOTE RAIN GAUGE (PCR800)

Dimensions

L x W x H

114 x 114 x 145 mm

(4.5 x 4.5 x 5.7 inches)

Weight

241 g (8.5 oz)

without battery

Transmission range 100m (329 ft) unobstructed

Power 2 x UM-3 (AA) 1.5V

ABOUT OREGON SCIENTIFIC

Visit our website www.oregonscientic.com to learn more

about Oregon Scientic products.

For any enquiry, please contact our Customer Services at

info@oregonscientic.com.

Oregon Scientic Global Distribution Limited reserves

the right to interpret and construe any contents, terms

and provisions in this user manual and to amend it, at

its sole discretion, at any time without prior notice. To

the extent that there is any inconsistency between the

English version and any other language versions, the

English version shall prevail.

EU - DECLARATION OF CONFORMITY

Hereby, IDT Technology Limited, declares that this

Remote Rain Gauge with Outdoor Thermometer

(model: RGR126N) is in compliance with the essential

requirements and other relevant provisions of Directive

2014/53/EU. A copy of the signed and dated Declaration

of Conformity is available on request via our Oregon

Scientic Customer Service.

COUNTRIES RED APPROVAL COMPLIED

All EU countries, Switzerland CH

und Norwegen N

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) This device must accept any interference

received, including interference that may cause

undesired operation.

EN

12

WARNING

Changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can

be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for

support or sales. Please call our customer service number

(listed on our website at www.oregonscientific.com), or on

the warranty card for this product) for all inquiries instead.

We

Name: Oregon Scientific, Inc.

Address: 10778 SW Manhasset Dr.

UNIT B-2 Tualatin, Or 97062 USA

Telephone No.: 1-800-853-8883

Declare that the product

Product No.: RGR126N

Product Name: Remote Rain Gauge with Outdoor

Thermometer

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1, 41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

IT

1

Orologio con pluviometro

Modello: RGR126N

Manuale utente

INDICE

Contenuto della confezione .................................... 2

Introduzione ............................................................. 2

Panoramica .............................................................. 2

Vista Frontale ...................................................... 2

Vista Posterioree ................................................. 3

Dislay LCD ........................................................... 4

Sensore Remoto (THN802) ................................ 4

Pluviometro (PCR800) ........................................ 5

Come Iniziare ........................................................... 5

Unita’ Principale – Installazione batterie ............. 6

Sensore Remoto– Inserimento ........................... 6

Sensore Remoto ...................................................... 7

Trssmissione dati sensore ................................... 7

Pluviometro .............................................................. 7

Segnali sensori .................................................. 8

Orologio .................................................................... 9

Impostazione Manuale Orologio ......................... 9

Livello delle precipitazioni ....................................... 9

Storico precipitazioni ........................................... 9

Totale precipitazioni ........................................... 10

Allerta precipitazioni .......................................... 10

Temperatura ........................................................... 10

Reset ....................................................................... 10

Precauzioni ............................................................. 10

Speciche ............................................................... 11

Informazioni Su Oregon Scientic ....................... 12

Dichiarazione Di conformità ................................. 12

IT

2

3

CONTENUTO DELLA CONFEZIONE

Unità principale Pluviometro

Sensore remoto

Supporto per

sensore remoto

INTRODUZIONE

Grazie per aver acquistato l’orologio con pluviometro di

Oregon Scientific

TM

(RGR126N).

NOTA

Si prega di tenere questo manuale a portata di

mano, per sapere come utilizzare il prodotto. Il manuale

contiene istruzioni pratiche, specifiche tecniche e

avvertenze che è necessario conoscere.

PANORAMICA

VISTA FRONTALE

1

2

3

4

5

6

7

8

1. Schermo a cristalli liquidi su quattro righe: per

visualizzare le precipitazioni totali, precipitazioni

correnti, lo storico, la temperatura interna/esterna,

l’orologi e il calendario.

2. UP (SU): aumenta i valori di impostazione; tenere

premuto per un aumento rapido;

3. HIST (STOR): alternanza tra storico precipitazioni e

precipitazioni del giorno.

2

IT

3

PANORAMICA

VISTA FRONTALE

1. Schermo a cristalli liquidi su quattro righe: per

visualizzare le precipitazioni totali, precipitazioni

correnti, lo storico, la temperatura interna/esterna,

l’orologi e il calendario.

2. UP (SU): aumenta i valori di impostazione; tenere

premuto per un aumento rapido;

3. HIST (STOR): alternanza tra storico precipitazioni e

precipitazioni del giorno.

4. SINCE (DA): alternanza tra: premere per rivedere

la data in cui la misurazione avviato e la pioggia

annuale totale. Tenere premuto il tasto per

cancellare l’orario precedente di precipitazioni e

reimpostare a zero il contatore precipitazioni.

5. DOWN (GIÙ): diminuisce i valori di impostazione:

tenere premuto per un diminuzione rapida.

6. SEARCH (RICERCA): tenere premuto per forzare

una ricerca del pluviometro e del sensore remoto.

7. MODE (MODALITÀ): cambia visualizzazione tra

impostazioni/orologio.

8. Supporto rimovibile da tavolo: per posare l’unità

principale su una supercie piana.

VISTA POSTERIORE

1

2

3 5

4

1. Antenna: riceve il segnale radio dal pluviometro e

dal sensore remoto.

2. Foro per il montaggio a muro.

3. RAIN ALERT (ALLERTA PIOGGIA): l’allerta per

pioggia eccessiva In/mm: pollici/millimetri (unità

di misura della pioggia) ˚C / ˚F: unità di misura

della temperatura.

4. Comparto batteria.

5. RESET (REIMPOSTAZIONE): reimposta l’unità

alle impostazioni di default.

IT

4

5

DISPLAY LCD

1

11

12

13

14

15

16

17

2

3

4

5

6

7

8

9

10

MO A CRISTALLI LIQUID

1. TODAY (OGGI): indicatore della pioggia odierna

2. Indica in quale giorno precedente (1-9) sono stati

registrati dati visualizzati

3. Indicatore allerta pioggia

4. : batteria bassa del pluviometro

5. : stato ricezione in RF pluviometro

6. TOTAL (TOTALE): indicatore di pioggia

7. : stato ricezione in RF termo sensore esterno

8. : batteria bassa sensore remoto esterno

9. AM/PM (indicatore orario meridiano/pomeridiano)

10. : batteria bassa sensore remoto interno

11. mm/in: millimetri/pollici (unità di misura pioggia)

12. Pioggia odierna

13. mm/in: millimetri/pollici (unità di misura pioggia)

14. Pioggia totale

15. Temperatura esterna

16. SINCE (DA): data di inizio di rilevazione delle

precipitazioni Yr: Anno

17. Visualizzazione ora; M:D (mese : giorno); D:M

(giorno : mese); calendario

SENSORE REMOTO (THN802)

1

2

3

4

5

1. Indicatore LED

2. Foro montaggio a muro

3. RESET foro per reimpostazione

4. CHANNEL selezione canale (1,2,3)

5. Comparto batteria

PLUVIOMETRO (PCR800)

1. Pluviometro per rilevare il livello delle precipitazioni

2. Comparto batteria

3. Tasto RESET (REIMPOSTAZIONE)

1. Imbuto

2. Indicatore

4

IT

5

1. Indicatore LED

2. Foro montaggio a muro

3. RESET foro per reimpostazione

4. CHANNEL selezione canale (1,2,3)

5. Comparto batteria

PLUVIOMETRO (PCR800)

1

2

3

1. Pluviometro per rilevare il livello delle precipitazioni

2. Comparto batteria

3. Tasto RESET (REIMPOSTAZIONE)

1

2

1. Imbuto

2. Indicatore

COME INIZIARE

Posizionare l’unità principale, ed il sensore termico

entro :

• Misuratore di pioggia – 100 metri / 329 piedi

• Sensore termico – 100 metri / 329 piedi

IMPORTANTE

Si raccomanda di seguire la sequenza

sottostante mentre impostate le unità:

1. Impostate l’unità principale.

2. Impostate il pluviometro, quindi tenete premuto il

tasto SEARCH (RICERCA) sull’unità principale ed

attendete no a che ricevete il segnale.

3. Impostate il sensore remoto, quindi tenete premuto

il tasto SEARCH (RICERCA) sull’unità principale

ed attendete no a che ricevete il segnale.

4. Se non ricevete un segnale da un’unità remota,

ripetere il processo precedente.

IT

6

7

UNITA’ PRINCIPALE – INSTALLAZIONE

BATERIE

1

2

3

1. Inserite le batterie, abbinando correttamente la

polarità (+/-) come indicato nel comparto batteria.

2. Premete RESET (REIMPOSTAZIONE), o tenete

premuto SEARCH (RICERCA) sull’unità principale

per avviare il funzionamento. Le icone di ricezione

( e ) sull’unità principale lampeggeranno

mentre sta cercando il sensore o il pluviometro.

NOTA

L’unità principale torna alle impostazioni

predefinite a ogni sostituzione della batteria.

SENSORE REMOTO– INSERIMENTO

BATTERIE

1. Rimuovete il coperchio del comparto batteria con

un cacciavite.

2. Inserire le batterie rispettando le polarità.

3. Premete RESET dopo ogni sostituzione di batteria.

POSIZIONE

SIGNIFICATO

Area pioggia Batterie basse pluviometro

Area temperatura

esterna

Batterie basse sensore

esterno

Area orologio

Batterie basse unità

principale

NOTA

Usate batterie alcaline per un funzionamento più

lungo e batterie al litio in condizioni temperature rigide.

SENSORE REMOTO

L’unità principale può raccogliere dati da no a due

(2) sensori, includendo un pluviometro e un sensore

remoto.

Per impostare il sensore:

1. Aprite il comparto batteria.

2. Selezionate un canale quindi premete RESET.

3. Chiudete il coperchio del comparto batteria.

4. Collocate il sensore entro 100 m (329 piedi)

dall’unità principale usando il supporto da tavolo od

il supporto a parete.

Per delle

letture accurate, i posizionamenti

ideali per il sensore sarebbero in

qualsiasi posizione all’esterno

della casa ad un’altezza di non

più di 1,5 m (5 piedi); e può

essere posto al riparo dalla luce

solare diretta o da condizioni

di umidità.

TRSSMISSIONE DATI SENSORE

Per ricercare un sensore:

• Tenere premuto SEARCH.

• L'icona di ricezione del sensore nell'area del

sensore remoto mostra lo stato (vedere sotto).

6

IT

7

SENSORE REMOTO– INSERIMENTO

BATTERIE

1. Rimuovete il coperchio del comparto batteria con

un cacciavite.

2. Inserire le batterie rispettando le polarità.

3. Premete RESET dopo ogni sostituzione di batteria.

POSIZIONE

SIGNIFICATO

Area pioggia Batterie basse pluviometro

Area temperatura

esterna

Batterie basse sensore

esterno

Area orologio

Batterie basse unità

principale

Usate batterie alcaline per un funzionamento più

lungo e batterie al litio in condizioni temperature rigide.

SENSORE REMOTO

L’unità principale può raccogliere dati da no a due

(2) sensori, includendo un pluviometro e un sensore

remoto.

Per impostare il sensore:

1. Aprite il comparto batteria.

2. Selezionate un canale quindi premete RESET.

3. Chiudete il coperchio del comparto batteria.

4. Collocate il sensore entro 100 m (329 piedi)

dall’unità principale usando il supporto da tavolo od

il supporto a parete.

SUGGERIMENTO

Per delle

letture accurate, i posizionamenti

ideali per il sensore sarebbero in

qualsiasi posizione all’esterno

della casa ad un’altezza di non

più di 1,5 m (5 piedi); e può

essere posto al riparo dalla luce

solare diretta o da condizioni

di umidità.

TRSSMISSIONE DATI SENSORE

Per ricercare un sensore:

• Tenere premuto SEARCH.

• L'icona di ricezione del sensore nell'area del

sensore remoto mostra lo stato (vedere sotto).

ICONA DESCRIZIONE

L’unità sta cercando i(l)

sensore(i).

E’ stato trovato un canale.

Il sensore non può essere

trovato.

SUGGERIMENTO

Il raggio di trasmissione può variare

in base a molti fattori. Potreste dover posizionare

i(l)sensore/i in diverse locazioni per ottenere i

migliori risultati.

PLUVIOMETRO

Il pluviometro misura il livello delle precipitazioni,

indicando il tasso di caduta totale, corrente e per un

determinato periodo di tempo. Il sensore può trasmettere

in remoto i dati all’unità principale.

L’unità principale e il pluviometro dovrebbero essere

posizionati entro un raggio efficace: circa 100 m (329

piedi) in un’area aperta.

Il pluviometro dovrebbe essere montato orizzontalmente

a circa un metro (tre piedi) dal suolo in un’area aperta

lontana da alberi o altre istruzioni per permettere

alla pioggia di cadere naturalmente per una lettura

accurata.

150cm(5ft)

Sidan laddas...

Oregon Scientific OSRGR126N Användarmanual

Denna manual är också lämplig för

Oregon Scientific OSRGR126N Användarmanual

på andra språk

Relaterade papper

Andra dokument