SENZ TOURIST 2 RADIO FM/DAB+, BLÅ Bruksanvisning

Typ
Bruksanvisning
1
TOURIST 2
Instruction Manual
DAB+/FM Radio with Bluetooth
SENZTOURIS2BK
SENZTOURIS2WH
SENZTOURIS2GN
SENZTOURIS2BL
Thank you for purchasing your new SENZ TOURIST 2 DAB+/FM radio.
We recommend that you spend some time to read this instruction manual in
order that you fully understand all the operational features it oers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
2
SAFETY PRECAUTIONS
• Read all the instructions carefully before using the unit and keep them for
future reference.
Check that the voltage marked on the rating label matches your mains
voltage.
• The unit must be placed on a at stable surface and should not be
subjected to vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit may fall
o or tip over.
• The mains socket must be located near the unit and should be easily
accessible.
• Avoid extreme degrees of temperature, either hot or cold. Place the unit
well away from heat sources such as radiators or gas/electric res.
• Avoid exposure to direct sunlight and other sources of heat.
• Never place any type of candle or naked ame on the top of or near the
unit.
• To reduce the risk of re, electric shock or product damage, do not expose
this unit to rain, moisture, dripping or splashing. No objects lled with
liquids, such as vases, should be placed on the unit.
If you spill any liquid into the unit, it can cause serious damage. Switch it
oat the mains immediately. Withdraw the mains plug and consult your
dealer.
• To prevent the risk of electric shock or re hazard due to overheating,
ensure that curtains and other materials do not obstruct the ventilation
vents.
Safety
• Always disconnect the unit from the mains supply before connecting/
disconnecting other devices or moving the unit.
• Unplug the unit from the mains socket during a lightning storm.
• This unit will become warm when used for a long period of time.
• This is normal and does not indicate a problem with the unit.
Mains Adapter
• Make sure the unit is not resting on top of the mains adapter cable, as the
weight of the unit may damage the cable and create a safety hazard.
If the mains adapter is damaged it must be replaced by the manufacturer,
3
its service agent, or similarly qualied persons in order to avoid a hazard.
Interference
Do not place the unit on or near appliances which may cause
electromagnetic interference. If you do, it may adversely aect the
operating performance of the unit, and cause a distorted sound.
Supervision
Children should be supervised to ensure that they do not play with the unit.
Never let anyone especially children push anything into the holes, slots or
any other openings in the case - this could result in a fatal electric shock.
Service/Maintenance
• To reduce the risk of electric shock, do not remove screws. The unit does
not contain any user serviceable parts. leave all maintenance work to
qualied person.
• Do not open any xed covers as this may expose dangerous voltages.
• Ensure to unplug the unit from the mains socket before cleaning.
• Do not use any type of abrasive pad or abrasive cleaning solutions as
these may damage the unit's surface.
• Do not use liquids to clean the unit.
Earphones
• Listening to loud sounds for prolonged periods of time may permanently
damage your hearing.
Before putting on earphones, turn the volume down then put the
earphones on and slowly increase the volume until you reach a
comfortable listening level.
Package Contents
DAB+ /FM Radio
Power supply adapter
Instruction manual
4
Product Overview
1. SELECT / SNOOZE
2. SCAN / PLAY PAUSE
3. INFO/MENU / PREVIOUS
4. PRESET / NEXT
5. CARRYING HANDLE
6. MODE
7. DOT-MATRIX LCD DISPLAY
8. VOLUME +
9. ON / STANDBY
10. VOLUME -
11. SPEAKER
12. MIRCO-B DC JACK
13. MICRO SD CARD SLOT
14. USB CONNECTOR
15. BATTERY COMPARTMENT
COVER
16. AUX-IN JACK
17. HEADPHONE JACK
5
OPERATING INSTRUCTION
POWER SUPPLY
AC Adaptor Operation
Insert one end of the AC adaptor to the Micro-B DC socket (Location 12) of
the unit, and the other end to the power supply. The unit will be
automatically in standby mode when connecting to AC power.
To disconnect the set from the AC supply completely, withdraw the AC
adaptor from the wall outlet.
DC (battery) Operation
1. To operate your unit on batteries, the AC adaptor must be disconnected
from the unit and Wall outlet. If not, the unit will be operated by AC power,
instead of DC batteries.
2. Insert 3 batteries, type R14, UM2 or C cells (not included) into battery
compartment and then close the compartment cover (Location 15).
Notes
Check your batteries regularly. Old or discharged batteries should be replaced. If
the unit is not to be used for some time or is being run exclusively on AC electrical
current, remove batteries from the battery compartment to avoid leakage.
Warning: Before using the unit, check that the local mains supply is compatible
with the unit. Do not plug or unplug the power cable when your hands wet.
When planning not to use the unit for long periods of time (i.e. vacation etc.)
disconnect the plug from the wall outlet.
Switch On The Radio
1. When in AC power supply, press ON/STANDBY to switch on the radio.
When in DC (battery) power supply, press and hold ON/STANDBY to
switch on the radio.
2. Press ON/STANDBY once again to enter standby mode.
DAB Mode
1. Press MODE to select the DAB mode.
6
Auto Scan
1. Adjust the antenna extension and angle to have the best reception.
2. The first time entering to the DAB mode, it will automatically select DAB
mode and start a quick scan of the DAB channels to search for available
stations. Please leave it to complete this process.
3. Rotate SELECT to select desired station.
Note: You may have to wait for the unit to tune into the new channel.
4. Press SCAN can fully scan the available channels again.
Manual Scan
1. Hold MENU/INFO button, the display shows full scan, then rotate
SELECT knob to select manual tune, press SELECT knob to enter.
2. Rotate SELECT knob to select desired channel (5A-13F), press SELECT
to enter the channel.
3. Select station by pressing SELECT
FM Mode
1. Press MODE to select the FM mode.
Manual tuning
Switch tuning SELECT, until the desired station is found.
Automatic tuning
1. Press SCAN and the display frequency starts to run.
2. When a station of sucient strength has been found tuning stops, or you
can start automatic tuning by pressing SCAN again.
To improve reception:
- For FM, pull out the telescopic aerial. To improve FM Reception incline and
turn the aerial, reduce its length if the FM-signal is too strong (very close to
a transmitter).
DAB / FM Radio Stations Preset:
You can store the frequencies of up to 20 radio stations in the memory. A
stored frequency can be erased from the memory by storing another
frequency in its place.
1. In DAB or FM mode, tune to your desired station.
7
2. Hold PRESET until the display with showing 1-20 (1-20 is the preset
position number)
If the preset number is empty,Preset Empty” is shown.
If the position is saved with station, station frequency is shown.
3. Rotate SELECT to select the desired memory location.
4. Press SELECT once to conrm and save the selected station.
5. To listen to a preset station:
• Press PRESET once,
• Rotate SELECT for selecting your desired station.
Bluetooth Function
1. Press MODE to select the Bluetooth mode.
2. Activate the Bluetooth function in your Bluetooth device.
3. Select “SENZ TOURIST 2” on your Bluetooth device for pairing. The
speakers will have a pop sound to conrm if successfully connect with your
Bluetooth device.
4. Start music play on your Bluetooth device.
After connected, you can control the playback, pause, next, previous
function by both yout Bluetooth device or the unit directly.
5. Press SCAN / PLAY PAUSE button for seconds to disconnect the
pairing of Bluetooth function. The Bluetooth indicator will be ashing after
pairing disconnected.
Tips:
The device will be disconnected when the device is moved beyond the
operational range. If you want to reconnect the device to the unit, place it
within the operational range.
Note:
The operational range between this unit and a Bluetooth device is
approximately 10 meters. Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
Before you connect a Bluetooth device to this unit, familiarize yourself with
the Bluetooth capabilities of the device. Compatibility with all Bluetooth
devices is not guaranteed.
Keep this unit away from any other electronic device that may cause
8
interference.
USB, Micro SD Card Playback
Able to decode and playback all MP3 les which stored in the memory media
with USB connector, MICRO SD Card Slot.
1. Press MODE to select the USB mode or SD mode.
2. Before connecting the USB media to the unit, make sure the port is in
correct direction and will connect. Or insert MICRO SD Card straightly
without bending.
3. The system will automatically start reading the MP3 les in the USB
Storage Media, MICRO SD Card.
4. Press USB MICRO SD PREVIOUS / PLAY PAUSE / NEXT buttons for
Previous / Play & Pause / Next functions.
Wrongly connect the USB Storage Media or MICRO SD Card upside
down could damage the unit or the USB Storage Media or MICRO SD
Card. A locked MICRO SD Card cannot be detected or playback.
Using the AUX Input
1. Press MODE to select the AUX mode.
2. Connect the AUX connect wire from the out jack of your Personal Player
such as portable MP3 player to the AUX input jack
3. Turn on your Personal Player to begin playing, adjust the volume to
desire listening level.
4. Adjust the volume by pressing the VOLUME + or VOLUME -
Normal Operation
Setting the Time
Automatic tuning
The DAB radio signal and FM radio RDS signal have current time information.
After a short time the current time will appear on the display. If no signal is
found, the time cannot be set. It may be necessary to relocate your radio to
a position giving better reception.
9
Manual tuning
1. During in Standby mode / DAB mode / FM mode, hold MENU for seconds
to entry the Menu Setting mode.
2. Rotate and press SELECT to entry the System menu list <System>.
3. Rotate and press SELECT to entry the Time menu list <Time>.
4. Rotate and press SELECT to entry varies settings <Set Time/Date>
<Set Date Format> <Set 12/24 Hour> and <Auto Update>.
5. Set the current Time and Date.
Setting the Alarm
1. During in Standby mode / DAB mode / FM mode, hold MENU for seconds
to entry the Menu Setting mode.
2. Rotate and press SELECT to entry the System menu list <System>.
3. Rotate and press SELECT to entry the Alarm menu list <Alarm>.
4. Rotate and press SELECT to entry Alarm 1 or Alarm 2 setting.
5. Rotate and press SELECT to entry varies settings <Alarm On/O>
<Alarm Time><Wake up mode -Daily/ Once
/Weekdays/Weekends><Wake Up sound - DAB/FM/BEEPER /USB/SD >
and <Sound Volume>.
6. To make sure the alarm icon is switch on if alarm function is in using.
Snooze Function:
When the alarm sounds, press SELECT button to keep snoozing another 9
minutes.
Press ON/STANDBY to stop the sound from the alarm. (Radio will be
turned o at the same time.)
Sleep Function:
1. During in DAB mode / FM mode, hold MENU for seconds to entry the
Menu Setting mode.
2. Rotate and press SELECT to entry the System menu list <System>.
3. Rotate and press SELECT to entry the Sleep menu list <Sleep>.
4. Rotate and press and press SELECT to select a time. For example, when
the time <15 minutes> is selected, the radio turns o automatically
after 15 minutes.
10
Volume
Adjust the sound with the controls VOLUME + or VOLUME -
You may connect headphones (not included) to 3.5mm HEADPHONE JACK.
The loudspeaker is then muted.
Avoid listening to headphones at high volume levels to prevent
possible hearing damage.
Setting the OSD language
1. During in Standby mode / DAB mode / FM mode, hold MENU for seconds
to entry the Menu Setting mode.
2. Rotate and press SELECT to entry the System menu list <System>.
3. Rotate and press SELECT to entry the Language menu list <Language>.
4. Rotate and press SELECT to select the desired OSD Language.
11
Specications
Frequency range: DAB : 174-240MHz / FM : 87.5-108MHz
Speaker:
3 inches, 4 ohm dynamic speaker
Power Output:
2.0W RMS
AC Operate: DC 5V Adapter
DC Operate:
DC 4.5V Battery (3 x 1.5V "R14 / UM-2 / C")
Bluetooth Transmission
Frequency Range:
2402 MHz- 2480 MHz
Max. Transmission Power
(Bluetooth):
3 dBm
Power Adaptor
Manufacturer
Shenzhen Mao Two Power Co.,Ltd
Address
D315, No. 514 Jian’an Road, Wenhui
Community, Xin’an
Street, Baoan District, Shenzhen, China
Type
MR-0501000EU
Input voltage
100-240V
Input AC frequency 50/60Hz
Output voltage 5V
Output current 1A
Output power
5W
Average active eciency 74.80%
Eciency at low load (10%) 66.80%
No-load power consumption
<0.1W
12
Trouble Shooting
Problem
Solution
Radio signal is
weak
Adjust the antenna extension and angle to have the best
reception.
No Sound
1.
Adjust the volume on the radio or the Bluetooth connected
device.
2. Make sure that your Bluetooth device is within the
eective operational range.
Cannot nd the
pairing ID "SENZ
TOURIST" on the
Bluetooth device
1.
Ensure the Bluetooth function is activated on your
Bluetooth device.
2. Make sure that your Bluetooth device is within the
eective operational range.
This symbol on the product or in the instructions means that
your electrical and electronic equipment should be disposed
at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your
retailer where you purchased the product.
13
Imported and Exclusively marketed by:
Power International AS,
PO Box 523, 1471 Lørenskog, Norway
Power Norge:
https://www.power.no/kundeservice/
T: 21 00 40 00
Expert Danmark:
https://www.expert.dk/kundeservice/
T: 70 70 17 07
Power Danmark:
https://www.power.dk/kundeservice/
T: 70 33 80 80
Punkt 1 Danmark:
https://www.punkt1.dk/kundeservice/
T: 70 70 17 07
Expert Finland:
https://www.expert./tuki/asiakaspalvelu/
T: 020 7100 670
Power Finland:
https://www.power./tuki/asiakaspalvelu/
T: 0305 0305
Power Sverige:
https://www.power.se/kundservice/
T: 08 517 66 000
14
TOURIST 2
Bruksanvisning
DAB+-/FM-radio med Bluetooth
SENZTOURIS2BK
SENZTOURIS2WH
SENZTOURIS2GN
SENZTOURIS2BL
Takk for at du kjøpte din nye SENZ TOURIST 2 DAB+/FM-radio.
Vi anbefaler at du tar deg tid til å lese gjennom hele bruksanvisningen for å
bli fortrolig med alle funksjonene som tilbys.
Les alle sikkerhetsanvisningene nøye før bruk, og oppbevar
bruksanvisningen for fremtidig referanse.
15
SIKKERHETSTILTAK
Les alle anvisninger nøye før du tar i bruk enheten, og oppbevar dem
for fremtidig referanse.
Kontroller at spenningen som er markert på strømkravetiketten
samsvarer med spenningen i stikkontakten.
Enheten må plasseres på en at, stabil overate og ikke utsettes for
vibrasjoner.
Ikke sett enheten på skjeve eller ustabile overater, da den kan falle
ned eller velte.
Stikkontakten må være i nærheten av enheten og lett tilgjengelig.
Unngå ekstreme temperaturer, enten høye eller lave. Plasser enheten i
god avstand fra varmekilder som radiatorer eller gass-/elektriske
ovner.
Unngå direkte solskinn og andre varmekilder.
Plasser aldri noen form for stearinlys eller åpen amme oppå eller i
rheten av enheten.
For å redusere risikoen for brann, elektrisk støt eller skade på
produktet enheten ikke utsettes for regn, fuktighet, drypp eller
sprut.skefylte gjenstander, som f.eks. blomstervaser, ikke
settes på enheten.
Hvis du søler væske inn i enheten, kan det føre til alvorlig skade. Du må
da straks sav strømmen. Trekk støpslet ut av stikkontakten, og ta
kontakt med forhandleren.
Forebygg risikoen for elektrisk støt og brann som følge av
overoppheting ved å påse at gardiner og andre gjenstander ikke tetter
ventilasjonsåpningene.
Sikkerhet
Trekk alltid støpslet ut av stikkontakten før du kobler utstyr til eller fra
og før du ytter enheten.
Trekk støpslet ut av stikkontakten under tordenvær.
Enheten blir varm når den brukes over lengre tid.
Dette er normalt, og er ikke en indikasjon på et problem med enheten.
Strømadapter
Sørg for at enheten ikke står oppå stmadapterkabelen, da vekten av
enheten kan skade strømledningen og utgjøre en sikkerhetsrisiko.
16
Hvis strømadapteren er skadet, må den skiftes av produsenten, av
produsentens servicerepresentant eller av en tilsvarende kvalisert
person for å unngå fare.
Interferens
Ikke sett enheten på eller i nærheten av apparater som kan skape
elektromagnetisk interferens. Dette kan forringe enhetens ytelse og ytelse
og skape forvrengt lyd.
Tilsyn
Barn være under tilsyn for å sikre at de ikke leker med enheten.
La aldri barn eller andre stikke gjenstander inn i hull, spalter eller andre
åpninger i kabinettet – dette kan føre til dødelig elektrisk støt.
Service/vedlikehold
For å redusere risikoen for elektrisk støt ingen skruer ernes.
Enheten inneholder ingen deler som skal vedlikeholdes av bruker. Alt
vedlikehold skal utføres av kvalisert personell.
Ikke ern noen faste deksler, da dette kan utsette deg og andre for
farlig spenning.
Trekk alltid støpslet ut av stikkontakten før du rengjør enheten.
Ikke bruk skureputer eller skuremidler av noe slag, da disse kan skade
enhetens overate.
Ikke bruk væske når du skal rengjøre enheten.
Øretelefoner
Hvis du lytter med høy lydstyrke over lengre tid, kan hørselen bli
permanent skadet.
Før du setter på øretelefonene, skru ned volumet og deretter sett
øretelefonene på og langsomt øk volumet til du kommer til et behagelig
lyttenivå.
17
Innhold i pakken
DAB+ /FM-radio
Strømforsyningsadapter
Bruksanvisning
18
Produktoversikt
1. VELG / SLUMRE
2. SKANN / SPILL AV PAUSE
3. INFO/MENY / FORRIGE
4. FORHÅNDSINNSTILLING/NESTE
5. BÆREHÅNDTAK
6. Modus
7. PUNKTMATRISE-LCD-SKJERM
8. LYDSTYRKE +
9. PÅ/VENTEMODUS
10. LYDSTYRKE -
11. HØYTTALER
12. MICRO-B-LIKESTRØMJONTAKT
13. MICRO SD-KORTSPOR
14. USB-KONTAKT
15. LOKKET TIL BATTERIROMMET
16. AUX-INNGANG
17. HODETELEFONKONTAKT
19
DRIFTSINSTRUKSER
STRØMFORSYNING
Bruk med vekselstrømadapter
Sett den ene enden av vekselstrømadapteren i Micro-B-likestrømkontakten
(plassering 12) på enheten, og sett den andre enden i strømforsyningen.
Enheten går automatisk i ventemodus når den kobles til vekselstrøm.
For å koble apparatet fra strømforsyningen helt du koble
strømadapteren fra stikkontakten.
Bruk med likestrøm (batteri)
1. For å bruke enheten med batterier strømadapteren kobles fra
enheten og stikkontakten. Hvis ikke går enheten strøm fra vekselstrøm i
stedet for likestrømbatteriene.
2. Sett inn 3 batterier av type R14-, UM2- eller C-celler (ikke inkludert) i
batterirommet, og lukk deretter lokket til rommet (plassering 15).
Merknader
Sjekk batteriene regelmessig. Gamle eller utladede batterier bør byttes. Hvis
enheten ikke skal brukes en stund, eller kun kjøres vekselstrøm fra
stikkontakt, må du erne batteriene fra batterirommet for å unn lekkasje.
Advarsel: Før du bruker enheten, du sørge for av strømforsyningen er
kompatibel med enheten. Ikke koble til eller fra strømkabelen med våte hender.
Når du ikke skal bruke enheten en lengre stund (ferie osv.), kobler du støpselet
fra stikkontakten.
Slå på radioen
1. Når radioen er koblet til vekselstrøm, trykker du ON/STANDBY for å slå
den på. Når radioen er koblet til likestrøm, holder du inne ON/STANDBY
for å slå den på.
2. Trykk ON/STANDBY igjen for å sette den i ventemodus.
DAB-modus
1. Trykk MODE for å velge DAB-modus.
20
Automatiskk
1. Juster lengden og posisjonen til antennen for å forbedre signalmottaket.
2. Første gang radioen går inn i DAB-modus, vil den automatisk velge
DAB-modus og skanne raskt etter DAB-kanaler for å søke etter
tilgjengelige stasjoner. Vent mens den fullfører denne prosessen.
3. Drei VELG for å velge ønsket stasjon.
Merk: Du kan måtte vente på at enheten stiller inn til den nye kanalen.
4. Trykk SCAN for å skanne etter tilgjengelige kanaler på nytt.
Manuelt søk
1. Hold inne MENY/INFO-knappen, viser skjermen full scanning,
dreier du VELG-knappen for å velge manuell tuning og trykker
SELECT-knappen for å gå inn.
2. Drei VELG-knappen for å velge ønsket kanal (5A–13F), og trykk VELG for
å velge kanalen.
3. Velg stasjon ved å trykke SELECT.
FM-modus
1. Trykk MODE for å velge FM-modus.
Manuelt søk
Trykk VELG til ønsket stasjon er funnet.
Automatisk innstilling
1. Trykk SCAN, så begynner frekvensen å løpe på skjermen.
2. Når det blir funnet en stasjon med godt nok signal, stopper søker; du kan
starte automatisk innstilling ved å trykke SCAN igjen.
For å forbedre mottaket:
- For FM trekker du ut teleskopantennen. For å forbedre FM-mottaket
vipper og vrir du antennen; reduser lengden hvis FM-signalet er for sterkt
(veldig nær en sender).
Forhåndsinnstilling av DAB-/FM-radiostasjoner:
Du kan lagre frekvensene til opptil 20 radiostasjoner i minnet. En lagret
frekvens kan slettes fra minnet ved å lagre en annen frekvens
posisjonen.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

SENZ TOURIST 2 RADIO FM/DAB+, BLÅ Bruksanvisning

Typ
Bruksanvisning