Andersson WIR 2.0 Wireless repeater Användarmanual

WIR 2.0 | Wireless repeater

User manual

English | Svenska | Norsk

Copyright

This manual is the copyright of CI no 556520-4137. No part of this manual may

be revised, copied or transmitted in any way without written permission from CI

no 556520-4137.

Statement

This manual does not provide any warranty or related declarations. All information

in this manual including the product speciﬁcation, pictures and literatures is just

for reference, CI no 556520-4137 reserves the rights to update contents of this

manual without further notice.

Copyright

Org.nr 556520-4137 äger upphovsrätten till den här handboken. Inga delar av

handboken får ändras, kopieras eller överföras utan skriftligt tillstånd från org.

nr 556520-4137.

Meddelande

Den här handboken innehåller inga garantier eller andra typer av utfästelser. All

information i handboken, inklusive tekniska data, bilder och texter, är endast ex-

empel och används i referenssyfte. Org.nr 556520-4137 förbehåller sig rätten att

upp-datera innehållet i handboken utan föregående meddelande.

Opphavsrett

Org.nr 556520-4137 har opphavsretten til denne håndboken. Ingen deler av denne

håndboken skal revideres, kopieres eller overføres på noen måte uten skriftlig sam-

tykke fra org.nr 556520-4137.

Erklæring

Denne håndboken gir ingen garanti eller tilhørende forsikringer. All informasjon

i denne håndboken, inklusiv produktspesiﬁkasjon, bilder og tekst, er bare ment

som referanse. Org.nr 556520-4137 forbeholder seg retten til å oppdatere innhol-

det i denne håndboken uten forvarsel.

English

Package Contents, Open Source Code 4

Getting Started 5

How to conﬁgure the Wi-Fi Repeater 6-9

Connect Your Computer/Laptop 10-11

Conﬁgure IP Address 12

Conﬁguring via Web Browser 13

Wireless Base Conﬁguration – Repeater Mode 14

Change Management password 15

Firmware Upgrade 16

Factory Default and Settings Backup , Restore 17

Svenska

Medföljande tillbehör, Öppen källkod 18

Kom igång 19

Konﬁgurera WiFi-repeatern 19-23

Anslut till datorn 24-25

Konﬁgurera IP-adress 26

Konﬁgurera via webbläsaren 27

Trådlösa grundinställningar - Repeaterläge 28

Byt administratörslösenord 29

Uppgradera ﬁrmware 30

Fabriksinställning och inställningar för

säkerhetskopiering och återställning 31

Norsk

Pakkens innhold, Åpen kildekode 32

Komme igang 33

Konﬁgurerer Wi-Fi repeatern 34-37

Koble datamaskinen til repeatern 38-39

Konﬁgurerer med nettverkets IP-adresse 40

Konﬁgurasjon via webleser 41

Grunnleggende trådløs konﬁgurasjon –

Repeatermodus 42

Endre behandlingspassord 43

Fastvareoppgradering 44

Sikkerhetskopiering av fabrikkinnstillinger og

nye innstillinger, gjenoppretting 45

Content / Innehållsförteckning / Register

English

4

Package Contents

1 x Wireless Repeater

1 x RJ-45 Networking Cable

1 x Quick installation Guide

Open Source Code

This product includes software codes developed by third parties.

These software codes are subject to either the GNU General Public

License (GPL), Version 2, June 1991 or the GNU Lesser General Public

License (LGPL), Version 2.1, February 1999. You can copy, distribute,

and/or modify in accordance with the terms and conditions of GPL

or LGPL.

The source code should be complete, if you think we need to provide

any additional source code ﬁles under GNU General Public License

(GPL), please contact us. We are committed to meeting the require-

ments of the GNU General Public License (GPL) .

Please refer to the GNU GPL Web site for further information.

http://www.gnu.org/licenses/licenses.en.html.

English

5

Getting Started

Setting up a Wireless Infrastructure Network

For a typical wireless setup at home (as shown below,

Please do the following:

Wireless Repeater Mode

You will need WiFi

AP/Router Internet access

Wireless AP Mode

You will need broadband

Router Internet access

Connect the WiFi-Repeater

to your Router/Switch with

RJ-45 Cable

English

6

How to conﬁgure the Wi-Fi Repeater

You can conﬁgure the wireless repeater by connecting it to your

computer/laptop with enclosed RJ45 cable or wirelessly.

Conﬁgure the Wireless Repeater wirelessly.

1. Plug the Wireless repeater to a wall socket.

Open Connect to a Network by right-

clicking the network icon ( or ) in the

notiﬁcation area. You will ﬁnd the signal from

the Wireless Repeater. Click on ‘Connect’

then wait for a few seconds.

2. Open web browser and type http://192.168.10.1 in the

browser’s address box. This number is the default IP address

for this device.

Note: Please check whether the Wireless Repeater

accord with factory default settings if you can’t download

http://192.168.10.1. If you are still not sure what causes the

problem, you can reset the Wireless Repeater by pressing the

RESET button for a few seconds, then try again.

3. The login screen below will appear. Enter the “User Name” and

“Password” then click “OK” to login. The default User name is

“admin” and Password is “admin”.

English

7

4. After logging in, you will see the web page below:

5. Select your Wireless SSID to continue.

6. When you see below, please do not change any setting but

only insert the key of your network.

English

8

Conﬁgure the Wi-Fi Repeater with RJ45 Cable.

1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer

/ laptop with the Wi-Fi Repeater with enclosed RJ45 Cable.

2. Follow process 3 - 7 on previous pages to conﬁgure your Wi-Fi

Repeater.

Conﬁgure the Wireless AP Mode.

1. Plug the Wi-Fi Repeater into a wall socket.

2. Follow process 3-4 on the previous pages.

3. Click on ‘AP’ to continue.

English

9

4. The following message will be displayed on your web browser:

SSID the “SSID” of your repeater wireless network.

Channel Auto (recommended)

Security type Setup the wireless security and encryption

to prevent from unauthorized access and

monitoring.

Supports 64/128-bit WEP, WPA, WPA2, WPA/

WPA2 encryption methods.

Security key The “Password” of your repeater wireless network.

Click ‘Apply’, and the repeater will restart. Wait for a few seconds

before your Wireless Repeater is ready to be used.

English

10

Connect Your Computer/Laptop

Adding wireless computers to the

Wireless Repeater

1. Log on to the computer.

2. Plug the wireless repeater to a wall

socket.

Open Connect to a Network by

right-clicking the network icon (

or ) in the notiﬁcation area.

3. Choose the wireless network from

the list that appears, and then click

Connect.

4. Type the network security key or

passphrase if you are asked to do

so, and then click OK. You’ll see a

conﬁrmation message when you

are connected to the network.

5. To conﬁrm that you added the computer, do the following:

Open Network by clicking the Start button , and then

clicking Control Panel. In the search box, type network, and

then, under Network and Sharing Center, click View network

computers and devices. You should see icons for the

computer you added andfor the other computers and devices

that are part of the network.

Note : If you don’t see icons in the Network folder, then

network discovery and ﬁle sharing might be turned off.

English

11

Adding a Wireless computers to the Wireless Repeater with

WPS Button

1. Log on to the computer.

2. Press the WPS button of the wireless repeater directly for 2-3

seconds.

3. Press the WPS button of the wireless adapter connected

to your computer directly for 2-3 seconds. Click Finish to

complete the WPS conﬁguration. (Please check your Wireless

adapter Manual with WPS conﬁguration)

4. You should see icons for the computer you added and for

the other computers and devices that are part of the network.

Adding a wired (Ethernet) computer to the wireless repeater

1. Plug the wireless repeater to a wall socket. Connect your

computer / laptop with the wireless repeater with enclosed

RJ45 Cable.

2. To conﬁrm that you added the computer, do the following:

Open Network by clicking the Start button , and then

clicking Control Panel. In the search box, type network, and

then, under Network and Sharing Center, click View network

computers and devices. You should see icons for the

computer you added and for the other computers and devices

that are part of the network.

For more information:

http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-

to-a-network

http://windows.microsoft.com/en-US/windows7/Setting-up-a-Wirelessetwork

http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-

Wirelessetwork

English

12

Conﬁgure IP Address

How to conﬁgure your computer/laptop with the Network IP Address

1. Log on to the computer.

2. Click the “Start” button (it should be located at the lower-

left corner of your screen), then click “Control Panel”. Click

“View Network Status and Tasks”, and then click “Manage

Network Connections”. Right-click “Local Area Network”,

then select “Properties”. When the “Local Area Connection

Properties” window appears, select “Internet Protocol

Version 4 (TCP/IPv4)” and then click “Properties”.

3. Setting IP address manually: Type IP address is 192.168.10.x

(x is from 2 to 254), and Subnet mask is 255.255.255.0. Type

the Router’s LAN IP address (the default IP is 192.168.10.1) into

the Default gateway ﬁeld.

English

13

Conﬁguring via Web Browser

In AP mode and click “Wireless -> Basic Settings” located at the web

management interface, the following message will be displayed on

your web browser:

You could conﬁgure the minimum number of Wireless settings for

communication, such as Network Name (SSID) and Channel. The

Access Point can be set simply with only the minimum setting items.

Wireless

Enable

Wireless On/Off

SSID the “SSID” of your repeater wireless network.

Channel Auto (recommended)

Security type Setup the wireless security and encryption

to prevent from unauthorized access and

monitoring.

Supports 64/128-bit WEP, WPA, WPA2, WPA/

WPA2 encryption methods.

Security key The “Password” of your repeater wireless network.

Click ‘Apply‘, and the Wireless Repeater will restart.

English

14

Wireless Base Conﬁguration – Repeater Mode

In Repeater mode and click “Wireless-> Basic Settings” located at

the web management

interface, the following message will be displayed on your web

browser:

Wireless Enable Wireless On/Off

Delete Remove the repeater connection proﬁle

Repeater ssid Auto (recommended)

Security type Set the repeater SSID security type.

Security key The “Password” of your repeater wireless

network.

Click ‘Apply‘, and the Wireless Repeater will restart.

English

15

Change Management password

Default password is “admin”, and it’s displayed on the login prompt

when accessed from web browser. There’s a security risk if you don’t

change the default password, since everyone can see it. This is very

important when you have wireless function enabled.

To change password, please follow the following instructions:

Please click ‘Management -> Password’ menu on the web

management interface, the following message will be displayed on

your web browser:

If you want to keep original password unchanged, click ‘Cancel’.

Click ‘Apply’, and the Wireless Repeater will log off.

English

16

Firmware Upgrade

The system software used by this router is called as ‘ﬁrmware’, just

like any applications on your computer, when you replace the old

application with a new one, your computer will be equipped with new

function. You can also use this ﬁrmware upgrade function to add new

functions to your router, even ﬁx the bugs of this router.

Please click ‘Management-> Upgrade Firmware’ located at the

web management interface, and then the following message will be

displayed on your web browser:

Click ‘Browse’ button ﬁrst; you’ll be prompted to provide the ﬁlename

of ﬁrmware upgrade ﬁle. Please download the latest ﬁrmware ﬁle from

our website, and use it to upgrade your router.

After a ﬁrmware upgrade ﬁle is selected, click ‘Upgrade‘ button, and

the router will start ﬁrmware upgrade procedure automatically. The

procedure may take several minutes. Please be patient.

NOTE: Never interrupt the upgrade procedure by closing the web

browser or physically disconnect your computer from router. If the

ﬁrmware you uploaded is corrupt, the ﬁrmware upgrade will fail, and

you may have to return this router to the dealer of purchase to ask for

help. (Warranty voids if you interrupted the upgrade procedure).

English

17

Factory Default and Settings Backup , Restore

You can backup all settings of this router to a ﬁle, so you can make

several copied of router conﬁguration for security reason.

To backup or restore router settings, please follow the following

instructions:

Please click ‘Save/Reload setting’ located at the web management

interface, then the following message will be displayed on your web

browser:

Save Set-

tings

to File

Press ‘Save…’ button, you can save it as another

ﬁlename for different versions, and keep it in a safe

place.

Load Set-

tings

Press ‘Browse…’ to pick a previously-saved

conﬁguration ﬁle from your computer, and then click

‘Upload…’ to transfer the conﬁguration ﬁle to router.

After the conﬁguration is uploaded, the router’s

conﬁguration will be replaced by the ﬁle you just

uploaded.

Reset

Settings

Click this ‘Reset‘ button to remove all settings you

made, and restore the conﬁguration of this router

back to factory default settings.

Svenska

18

Medföljande tillbehör

1 x WIR 2.0 Wireless repeater

1 x Snabbstartsguide

1 x RJ-45 Nätverkskabel

Öppen källkod

Den här produkten innehåller mjukvarukoder som har utvecklats av

tredjepart. Dessa mjukvarukoder omfattas antingen GNU General

Public License (GPL), Version 2 juni 1991, eller GNU Lesser General

Public License (LGPL), Version 2.1, februari 1999. Du kan kopiera, dis-

tribuera och / eller modiﬁera i enlighet med villkoren i GPL eller LGPL.

Källkoden ska vara komplett. Vi har åtagit oss att uppfylla kraven i GNU

General Public License (GPL).

Se GNU GPL:s hemsida för ytterligare information:

http://www.gnu.org/licenses/licenses.en.html.

Svenska

19

Kom igång

Installera ett trådlöst nätverk

För ett vanligt trådlöst nätverk hemma (såsom på bilden)

Gör följande

Trådlös förlängning

Du behöver WiFi

AP / Router med

Internetåtkomst

Trådlös accesspunkt

Du behöver bredband

Router med

Internetåtkomst

Anslut WiFi-repeatern

till din router / switch med

RJ-45-kabel

Svenska

20

Konﬁgurera WiFi-repeatern

Du kan konﬁgurera den trådlösa repeatern genom att ansluta den till

din dator / laptop med medföljande RJ45-kabel eller trådlöst.

Konﬁgurera den trådlösa repeatern

1. Logga in på datorn. Koppla den trådlösa

repeatern till ett vägguttag. Öppna Anslut

till ett nätverk genom att högerklicka på

nätverksikonen ( eller ) i aktivitetsfältet.

2. Du kommer att hitta en signal från repeatern.

Klicka på “Anslut”. Vänta sedan i några

sekunder.

3. Öppna webbläsaren och skriv http://192.168.10.1 i adressfältet.

Detta nummer är standard-IP-adressen för denna enhet.

Om sidan inte laddas kan något vara fel. Kontrollera att

inställningarna är fabriksstandard, annars återställ routern

genom att trycka ned RESET-knappen i några sekunder.

4. Inloggningsfönstret nedan visas. Ange “Användarnamn” och

“Lösenord” och klicka på “OK” för att logga in. Förvalt standard-

användarnamn är “admin” och lösenordet är “admin”,

Sidan laddas ...

Andersson WIR 2.0 Wireless repeater Användarmanual

Andersson WIR 2.0 Wireless repeater Användarmanual

på andra språk

Relaterade papper

Andra dokument