Sanus F180c Användarmanual

Typ
Användarmanual
F180c INSTRUCTION MANUAL
Scan for easy install video
san.us/868
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952. We’re ready to help!
2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
No
Perfect!
Yes
This mount is NOT compatible. Visit vuepoint.sanus.com or call
1-888-333-9952 to fi nd a compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at
1-888-333-9952.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
100 lbs.
(45.4 kg)
Ready to begin?
Does your TV
(including accessories)
weigh more than
100 lbs. (45.4 kg)?
CAUTION:
DO NOT install
into drywall alone
Unsure?
Drywall with
wood studs?
Solid concrete or
concrete block?
Call Customer Service:
1-888-333-9952
Perfect! Perfect!
CAUTION: Avoid potential personal injuries and property damage!
This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
The wall must be capable of supporting fi ve times the weight of the TV and mount combined
Do not use this product for any purpose not explicitly specifi ed by manufacturer
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Wood Stud Install
Concrete Install
Awl
Pencil Level
Stud Finder
Screwdriver
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill
Hammer
1/2 in.
(13 mm)
Socket
Wrench
Drill Bit
3/8 in.
(10 mm)
Concrete
Texto en español, página 22
Svensk text sida 46
Texte français page 28
52
Deutscher Text Seiten 34
中文文字说明请参见第 58
Nederlandse tekst op pagina 40
Русский текст: стр. 64
3
15.75
400.0
2.95
75.0
3.94
100.0
23.62
600.0
7.87
200.0
2.95
75.0
3.94
100.0
7.87
200.0
15.75
400.0
11.81
300.0
11.81
300.0
12.00
304.9
12°
11°
2.85
72.4
15.00
381.0
0.38
9.7
OFFSET
3.00
76.1
OFFSET
6.50
165.1
18.00
457.2
8.80
223.5
Dimensions in. [mm]
NOTE: TV shifts 3 in. (76.1 mm) to the right or left when in the home posi-
tion. Consider this when selecting the location of your wall mount.
4
M5 x 12mm
M6 x 12mm
M6 x 35mm
M5 x 35mm
M8 x 16mm
M8 x 12mm
M8 x 35mm
M8 x 20mm
M6 x 25mm
M
5
M
6
/
M
8
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
01
TV Bracket
TV Screws
Washers
Spacers
TV Bracket
Extenders
Interface Screws (TV Bracket)
03 x8
04 x4 05 x4
06 x4
07 x4 12 x4
08 x4 10 x4 13 x4
09 x4 11 x4 14 x4
01 x1 02 x4
5
.695 x .350 x.075 in.
Fischer UX 10 x 60R Anchor
5/16 x 2¾ in.
WELCOME AND TH
ANKS FOR CHOOSING SA
NUS DECO
R
A
STEP 2 Parts and Hardware
Concrete Anchors
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
Wall Plate
Wall Plate Template
Lag Bolts
Lag Bolt Washers
17 x4
18 x4
19 x4
15 x1
16 x1
6
1/4-20 x 3/4 in.
10-24 x 1 in.
STEP 3 Parts and Hardware
Additional Hardware
Locking Screw
Wall plate screw
Arm Assembly
Cable Ties
21 x2
22 x1
20 x1
23 x5
7
STEP 1 Attach TV Bracket to TV
1.1 Measure Your TV Hole Pattern
cm
inches
inch dimensions are approximate
Measure the width and height of your TV hole pattern in cm.
Record your measurements:
Width __________ cm x Height ________ cm
75 mm = 7.5 cm 3 in.
100 mm = 10 cm ≈ 4 in.
200 mm = 20 cm ≈ 7 7/8 in.
300 mm = 30 cm ≈ 11 3/4 in.
400 mm = 40 cm ≈ 15 3/4 in.
600 mm = 60 cm ≈ 23 5/8 in.
8
1.2 Assemble Your TV Bracket
Based on your TV hole pattern measurements
from STEP 1.1 (W cm x H cm), determine your
TV bracket configuration: A, B, C, D, E or F.
A
7.87
[20.0]
15.75
[40.0]
15.75
[40.0]
11.81
[30.0]
15.75
[40.0]
2.95
[7.5]
in.
[cm]
in.
[cm]
in.
[cm]
30.0 x 30.0 cm
40.0 x 40.0 cm
40.0 x 30.0 cm
B C
These smaller hole patterns only use TV
bracket
01
. Do not use the four TV bracket
extenders
02
and eight screws
03
.
7.5 x 7.5 cm
10.0 x 10.0 cm
20.0 X 20.0 cm
02
03
2.95
[7.5]
3.94
[10.0]
7.87
[20.0]
3.94
[10.0]
03
Assemble TV bracket extenders
02
onto
TV bracket
01
and secure using eight
screws
03
in the corner holes indicated.
Assemble TV bracket extenders
02
onto
TV bracket
01
and secure using eight
screws
03
in the corner holes indicated.
02
02
01
0202
01
01
03
11.81
[30.0]
11.81
[30.0]
9
03
in.
[cm]
in.
[cm]
in.
[cm]
60.0 x 40.0 cm
D
40.0 x 20.0 cm 20.0 x 40.0 cm
E F
03
03
15.75
[40.0]
15.75
[40.0]
7.87
[20.0]
23.62
[60.0]
15.75
[40.0]
7.87
[20.0]
01
Assemble TV bracket extenders
02
onto
TV bracket
01
and secure using eight
screws
03
in the corner holes indicated.
Assemble TV bracket extenders
02
onto
TV bracket
01
and secure using eight
screws
03
in the corner holes indicated.
Assemble TV bracket extenders
02
onto
TV bracket
01
and secure using eight
screws
03
in the corner holes indicated.
01
02
02
02
02
0202
01
10
M5 M6 M8
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M5, M6, or M8) to use.
FLAT BACK ROUND BACK CABLESINSET HOLES
If your TV has a flat back AND you want your TV closer to the
wall, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
Round/irregular back TVs
TVs with inset mounting holes
Extra space needed for cables
Too Long
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
- Too short will not hold the TV.
- Too long will damage the TV.
Too Short
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection, contact
Customer Service at
1-888-333-9952.
11
1.5 Attach TV Bracket
TV Bracket
Confi guration A
Illustrated
(with spacers)
TV Bracket
Confi guration D
Illustrated
(with spacers)
Flat Back
Round Back / Extra Space
Position your TV bracket configuration (A, B, C, D, E or F)
over your TV hole pattern - making sure the bracket is centered over the TV hole pattern
and level. Secure bracket using your screw/washer (Flat Back) or spacer/screw/washer (Round Back / Extra Space) selection.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
06
04 05
07 08 09
12
10
13
11
14
04 05
Note
orientation
of hanging
and locking
tabs
Hanging
Locking
12
WELC
OME AND THANKS FOR CHO
OSING SANUS DECORA
1 2
≤ 5/8 in.
(16 mm)
16 in.
(406 mm)
STEP 2A Attach Wall Plate to Wall
Wood Stud Option
15
CAUTION: Avoid potential personal injuries and property damage!
Drywall covering the wall must not exceed 5/8 in. (16 mm)
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by fi nding the stud edges using an awl, a thin nail, or an edge-to-edge stud fi nder.
2. Position the wall template
15
at your desired height and line up the holes with your stud center line. Level the template and tape in place.
13
WELC
OME AND THANKS FOR CHOOSING SANUS DECOR
A
3 4
17
18
3 in. (75 mm)
7/32 in.
(5.5 mm)
OOSING
OS
S
OS
O
OS
OS
I
OS
S
OSI
OSI
SANU
15
16
3. Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template
15
.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate
16
using lag bolts
17
and washers
18
. Tighten the lag bolts
17
only until the washers
18
are pulled firmly against
the wall plate
16
.
CAUTION: Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent unwanted movement
of the wall plate
16
.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
14
CAUTION: Avoid potential personal injuries and property damage!
Mount the wall plate
16
directly onto the concrete surface
Minimum solid concrete thickness: 8 in. (203 mm)
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
Minimum horizontal space between fasteners: 16 in. (406 mm)
1. Position the wall plate template
15
on the wall at your desired height. Level the wall plate template and mark the hole locations.
2. Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
WELC
OME AND THANKS FOR CH
OOSING SANUS DECORA
2
WEL
C
OME AND THANKS FOR CHOOSING SANUS DECO
RA
1
Min.
16 in.
(406 mm)
STEP 2B Attach Wall Plate to Wall
Solid Concrete or Concrete Block Option
3/8 in.
(10 mm)
3 in. (75 mm)
THANKS
N
NKS
NKS
NK
NK
N
N
K
N
NKS
NKS
N
FOR
1515
15
3. Remove the wall plate template
15
and insert four anchors
19
.
CAUTION: Be sure the anchors
19
are seated flush with the concrete surface.
4. Install wall plate
16
using lag bolts
17
and washers
18
. Tighten the lag bolts
17
only until the washers
18
are pulled firmly against
the wall plate
16
.
CAUTION: Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent unwanted movement
of the wall plate
16
.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
4
3
16
19
17
18
16
HEAVY! You may need assistance with this step.
1. Hang the arm
20
onto the wall plate
16
by first hooking the top support, then resting the arm
20
in place.
1
NOTE:
TV shifts 3 in. (7.61 cm) to the right or left when in the home position. Consider this when selecting the location of your wall mount.
CAUTION:
Avoid potential injury or property damage! For concrete applications, the base of the a
rm
20
must remain centered in the
wall plate
16
.
NOTE:
When mounting to wood stud walls, arm assembly
20
can be adjusted within the
wall plate
16
for optimal positioning.
20
20
16
16
20
16
STEP 3 Attach TV to Wall Plate
17
2 3
2. Install wall plate screws
21
to secure arm to wall plate
16
.
CAUTION: Avoid potential personal injury or property damage! Screws
21
must be installed to secure arm assembly
20
to wall plate
16
.
3. Fold first section of the arm
20
against the wall plate
16
to provide stability.
16
20
21
16
20
18
HEAVY! You may need assistance with this step.
4 5
4. Hang the TV bracket
01
onto the arm
20
by first hooking the top support, then resting the TV in place.
5. Secure the TV bracket
01
to the arm
20
with locking screw
22
.
CAUTION: Avoid potential personal injury or property damage! Locking screw
22
must be installed to secure the TV to the arm assembly
20
.
01
20
22
20
16
01
19
Manage Cables
Cables can be routed through the cable channels on the top and bottom of the arm
20
and secured to the arm with cable ties
23
for a cleaner look.
20
20
01
16
16
23
20
TV Adjustments
TILT ADJUSTMENT
Your TV should adjust easily when moved,
then stay in place. If your TV is too loose or
too tight, adjust the tilt tension knob by hand.
NOTE: Once your TV is in place,
tighten the tilt tension knob to prevent
unwanted movement.
LEVEL ADJUSTMENT
To adjust the leveling of your TV, loosen
the locking screw
22
, level your TV, then
tighten locking screw
22
.
IMPORTANT: This locking screw
22
must
be installed to secure the TV onto the arm
20
.
L
o
o
s
e
n
T
i
g
h
t
e
n
22
REMOVING THE TV
To remove your TV from the arm assembly
20
, disconnect all cables and then reverse
the procedures in STEP 3.
HEAVY! You may need
assistance with this step.
L
o
o
s
e
n
T
i
g
h
t
e
n
Tilt Tension Knob
20
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Sanus F180c Användarmanual

Typ
Användarmanual