Secura QSF210 Installationsguide

Kategori
Platt skärmfästen
Typ
Installationsguide
QSF
210
INSTRUCTION MANUAL
Texto en español, página 20
Deutscher Text Seiten 28
Svensk text sida 36
Русский текст: стр. 48
Texte français page 24
Nederlandse tekst op pagina 32
日本語は 40 ージ
中文文字说明请参见第 44
Let Us Help
If you have any questions along the way, just give us a call.
US: 800-359-5520 EMEA: +31 (0) 495 580 852 UK: 0800 056 2853
For HeightFinder, MountFinder and Install Videos,
Scan or visit san.us/2905
2
Wood Stud Install
Concrete Install
Tape
Measure
Pencil Level
Screw
driver
Electric
Drill
Socket
Wrench
Stud
Finder
Awl
Wood
Drill Bit
Masonry
Drill Bit
Hammer
3/8 in.
(10 mm)
1/2 in.
(13 mm)
7/32 in.
(5.5 mm)
CAUTION: IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ENTIRE MANUAL PRIOR TO USE SAVE THESE INSTRUCTIONS
Before getting started, let’s make sure this mount is perfect for you!
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Visit secura-av.com or call US: 800 359 5520 • EMEA:
+31 (0) 495 580 852 • UK: 0800 056 2853 to find a
compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this
product, contact Customer Service at
US: 800 359 5520 EMEA: +31 (0) 495 580 852 UK: 0800 056 2853.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
Ready to begin?
CAUTION:
DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
Solid concrete or
concrete block?
Perfect!
Drywall with
wood studs?
Perfect!
CAUTION:
DO NOT
install into
drywall alone
Unsure?
Call Customer Service:
US: 800 359 5520
EMEA: +31 (0) 495 580 852
UK: 0800 056 2853
?
25 lbs.
(11.3 kg)
Does your TV
(including accessories)
weigh MORE than
25 lbs. (11.3 kg)?
CAUTION: Avoid potential personal injury or property damage!
This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
The wall must be capable of supporting five times the weight of the TV and mount combined
Do not use this product for any purpose not explicitly specified by manufacturer
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
3
3.94in
100mm
7.87in
200mm
7.87in
200mm
.35in
8.8mm
8.15in
207.1mm
2.80in
71mm
6.40in
162.6mm
30deg
30deg
10.47in
265.9mm
16deg DOWN TILT
4deg UP TILT
8.80in
223.6mm
8.80in
223.6mm
10.26in
260.5mm
3.20in
81.4mm
.86in
21.9mm
30° SWIVEL LEFT AND RIGHT WITH AN APPROXIMATE 32" TV
TV INTERFACE
WALL PLATE
FULLY ASSEMBLED MOUNT
TOP VIEW - EXTENDED
TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
SIDE VIEW - RETRACTED
3-D
in.
[mm]
Dimensions
4
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
M4 x 8mm
M4 x 12mm
M6 x 12mm
M4 x 35mm
M6 x 35mm
M4
M6/M8
M8 x 16mm
M8 x 35mm
M8 x 20mm
STEP 1 Parts and Hardware
TV Screws
Washers
Spacers
TV Bracket
Extenders
TV Bracket
TV Bracket Screws
(TV Bracket extenders)
22mm
01 x1
02 x4
03 x8
04 x4
08 x4
09 x4
10 x4
11 x4 12 x4
13 x4
05 x4
06 x4
07 x4
5
5/16 x 2¾ in.
5/16 in.
Fischer UX 10 x 60R
Concrete Anchors
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
STEP 2 Parts and Hardware
STEP 3 Parts and Hardware
Additional Parts and Hardware
Wall Plate Assembly
Lag Bolts
Lag Bolt Washers
Securement Washer
Securement Screw
M4/M5 WASHER
Qty 4
M6/M8 WASHER
Qty 4
SPACER
Qty 4
M4 x 12mm SCREW
Qty 4
M8 x 20mm SCREW
Qty 4
M4 x 35mm SCREW
Qty 4
M5 x 12mm SCREW
Qty 4
M5 x 35mm SCREW
Qty 4
M8 x 35mm SCREW
Qty 4
M6 x 12mm SCREW
Qty 4
M6 x 35mm SCREW
Qty 4
M4 M6/M8
M4 x 12mm
M8 x 16mm
M4 x 35mm
M8 x 35mm
M6 x 20mm
M6 x 12mm
M6 x 12mm
M6 x 35mm
5/16 x 2 ½ in.
7/32 in.
Allen Key
Cable Ties
x1
21
x3
20
14 x1
15 x2
16 x2
17 x2
18 x1
19 x1
6
M4/M5 WASHER
Qty 4
M6/M8 WASHER
Qty 4
SPACER
Qty 4
M4 x 12mm SCREW
Qty 4
M8 x 20mm SCREW
Qty 4
M4 x 35mm SCREW
Qty 4
M5 x 12mm SCREW
Qty 4
M5 x 35mm SCREW
Qty 4
M8 x 35mm SCREW
Qty 4
M6 x 12mm SCREW
Qty 4
M6 x 35mm SCREW
Qty 4
M4/M5 M6
M4 x 12mm
M6 x 12mm
M4 x 35mm
M6 x 35mm
M6 x 20mm
M5 x 12mm
M6 x 12mm
M5 x 35mm
M4 x 8mm
M6 x 14mm
1/4 x 2 ½ in.
cm
inches
STEP 1 Attach TV Bracket to TV
These smaller hole patterns only use TV bracket
01
.
Do not use the four TV bracket extenders
02
and eight screws
03
.
01
10.0
7.5
10.0
7.5
1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV Bracket
Measure the width and height of your TV hole pattern in cm.
Record your measurements:
Determine which TV bracket configuration to use, A, B, or C
based on your TV hole pattern measurements.
cm
inches
Width ______cm x Height ______cm
02
03
inch dimensions are approximate
inches cm mm
3 7.5 75
4 10 25
7 20 200
W
H
A
7.5 x 7.5
10.0 x 10.0
Dimensions in cm
TV Hole Pattern
Measurement
7
Assemble TV bracket extenders
02
onto TV bracket
01
as illustrated.
Secure using eight screws
03
in the corner holes shown.
Assemble TV bracket extenders
02
onto TV bracket
01
as illustrated.
Secure using eight screws
03
in the corner holes shown.
01
20.0
20.0
20.0
10.0
01
02
02
02
02
02
02
02
02
03
03
20.0 x 20.0
B
Dimensions in cm
TV Hole Pattern
Measurement
20.0 x 10.0
C
Dimensions in cm
TV Hole Pattern
Measurement
8
M6 M8
FLAT BACK ROUND BACK CABLESINSET HOLES
M4
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
If your TV has a flat back, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
irregular / round back TVs
TVs with inset mounting holes
extra space needed for cables
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M6 or M8) to use.
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with your screw/
washer/spacer combination AND
TV bracket. (STEP 1.5)
- Too short will not hold the TV.
- Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection, contact
Customer Service at US: 800
359 5520 • EMEA: +31 (0) 495
580 852 • UK: 0800 056 2853
9
Flat Back
Round Back / Extra Space
1.5 Attach TV Bracket
02
01
01
NOTE: For 20.0 x 20.0 cm
or 20.0 x 10.0 cm hole patterns, you
may need to loosen the screws
03
to align the bracket extenders
02
.
After bracket extenders
02
are
secured to the back of your TV, re-
tighten screws
03
.
TV Bracket Configurations
B
and
C
(from page 7)
Configuration B Illustrated, with spacers
TV Bracket Configuration
A
(from page 6)
Illustrated with spacers
04 05 06 07
11 12
13
08 09 10
11 12
Position your TV bracket configuration (A, B, or C)
over your TV hole pattern - making sure the bracket is centered over the TV hole pattern and level.
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to secure the TV
bracket to the TV. DO NOT overtighten the screws.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
10
2 3
14
1
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate assembly
14
at your desired height and line up the holes with your stud center line. Level the wall plate assembly
14
and mark the hole locations.
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm). Be sure to drill into the center of the stud.
CAUTION: Avoid potential personal injury or property damage!
Drywall covering the wall, must not exceed 5/8 in. (16 mm)
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
Stud center must be verified
7/32 in.
(5.5 mm)
2 ¾ in. (70 mm)
Max. 5/8 in.
(16 mm)
STEP 2A Attach Wall Plate to Wall
Wood Stud Option
11
4
4. Install wall plate assembly
14
using two lag bolts
17
and two washers
16
. Tighten the lag bolts
17
only until the washers
16
are
pulled firmly against the wall plate assembly
14
.
NOTE: If needed, you can make small level adjustments to the wall plate assembly
14
by loosening the bottom lag bolt
17
and shifting the
wall plate assembly
14
until level. Tighten the bottom lag bolt
17
when adjustments are complete.
CAUTION: Avoid potential personal injury or property damage! All lag bolts
17
MUST BE firmly tightened to prevent unwanted
movement of the wall plate assembly
14
.
Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
Go to STEP 3 on PAGE 14.
17
16
14
17
14
12
1. Position the wall plate assembly
14
on the wall at your desired height. Level the wall plate assembly
14
and mark the hole locations.
2. Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
2
1
CAUTION: Avoid potential personal injury or property damage!
Mount the wall plate assembly
14
directly onto the concrete surface
Minimum solid concrete thickness: 8 in. (203 mm)
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
002862.eps
14
STEP 2B
Attach Wall Plate to Wall
Solid Concrete or Concrete Block Option
3/8 in.
(10 mm)
3 in. (75 mm)
13
43
3. Insert two anchors
15
.
CAUTION: Be sure the anchors
15
are seated flush with the concrete surface.
4. Install wall plate assembly
14
using two lag bolts
17
and two washers
16
. Tighten the lag bolts
17
only until the washers
16
are
pulled firmly against the wall plate assembly
14
.
CAUTION: Improper use could reduce the holding power of the lag bolt
17
. DO NOT over-tighten the lag bolts.
NOTE: If needed, you can make small level adjustments to the wall plate assembly
14
by loosening the bottom lag bolt
17
and shifting the wall
plate assembly
14
until level. Tighten the bottom lag bolt
17
when adjustments are complete (see page 11).
14
17
16
15
14
3
2
1
HEAVY! You may need assistance with this step.
STEP 3 Hang TV onto Wall Plate
1. Position the arm of wall plate assembly
14
so the elbow is bent 90 degrees and pressed against the wall.
2. Hang the TV onto the arm of wall plate assembly
14
by first hooking the top support, then resting the TV into place.
3. Lock the TV to the wall plate assembly
14
with securement screw
18
and securement washer
19
.
CAUTION: Avoid potential personal injuries and property damage! This securement screw
18
must be installed to secure the TV
onto the wall plate assembly
14
.
14
14
18
19
14
Top Support
15
Manage Cables
If desired, thread a supplied cable tie
20
through the loop provided on the arm of the wall plate assembly
14
, and secure your TV cables
along the arm for a clean look.
IMPORTANT: Fully extend the arm of wall plate assembly
14
to ensure you have enough slack in the cables for full TV movement.
20
14
16
TV Adjustments
TILT ADJUSTMENT
Your TV should adjust easily when moved, then stay in place.
If your TV is too loose or too tight, adjust the tilt tension
knob by hand.
NOTE: Once your TV is in place, tighten the tilt tension
knob to prevent unwanted movement.
LEVEL ADJUSTMENT
To adjust the leveling of your TV, loosen the securement screw
18
,
level your TV, then tighten securement screw
18
.
IMPORTANT: This securement screw
18
must be installed to
secure the TV onto the wall plate assembly
14
.
Tighten
Loosen
18
Tilt Tension Knob
Tighten
Loosen
17
REMOVING THE TV
To remove your TV from the wall plate assembly
14
,
disconnect all cables and then reverse the
procedures in STEP 3.
14
HEAVY! You may need
assistance with this step.
18
Features
Fully articulating arm with 3
pivot points creates optimal
viewing positions
TV tilts up or down for the
perfect viewing angle
Level
adjustments
create a
worry-free
installation
Adjustments allow fingertip control
of TV or restriction of TV movement
TV bracket expands
to fit TV hole patterns
from 75 x 75 mm up to
200 x 200 mm
Cable tie hook
holds cables
along mount arm
for a clean look
19
¿Su televisor pesa más de?
No: ¡Perfecto!
Sí: Esta montura NO es compatible. Visite secura-av.com o llame al número 1-800-359-5520 para encontrar una montura compatible.
20
¿Su televisor pesa más de 11,3 kg (25 lb) incluidos los accesorios?
No: ¡Perfecto!
Sí: Esta montura NO es compatible. Visite secura-av.com o llame al número US: 800 359 5520 • EMEA: +31 (0) 495 580 852 • UK: 0800 056 2853 para
encontrar una montura compatible.
11,3 kg
(25 lb)
ESPAÑOL
INSTRUCCIONES IMPORTANTES DE SEGURIDAD: GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.
¿Preparado para empezar?
Lea atentamente estas instrucciones en su totalidad para asegurarse de que está familiarizado con el sencillo proceso de instalación. Consulte igualmente
el manual de su televisor para conocer si existen requisitos especiales para el montaje de su aparato.
Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, el montaje o el uso del producto, póngase en contacto con el
Servicio de Atención al Cliente al número US: 800 359 5520 • EMEA: +31 (0) 495 580 852 • UK: 0800 056 2853.
PRECAUCIÓN: ¡Evite posibles lesiones personales y daños materiales!
Este producto se ha diseñado para su uso en montantes de madera, hormigón macizo y paredes de bloques de hormigón:
NO lo instale en paredes únicamente de yeso
La pared debe ser capaz de soportar hasta cinco veces el peso combinado del televisor y la montura
No utilice este producto para ningún otro propósito que no sea el explícitamente especificado por el fabricante
El fabricante no se responsabiliza de ningún daño o lesión resultante del montaje incorrecto o el uso indebido
¡Antes de empezar, asegúrese de que este es el soporte adecuado para usted!
1
2
3
4
¿De qué está
hecha la
pared?
¿Tiene todas las herramientas necesarias?
Localizador de
montantes
Punzón Lápiz Nivel Destorni-
llador
Cinta
métrica
Taladro
eléctrico
Broca para
madera
Broca para
mampostería
Llave de vaso Martillo
13 mm
(1/2 pulg.)
5 mm
(7/32 pulg.)
10 mm
(3/8 pulg.)
¿Hormigón macizo o
bloque de hormigón?
¿Paneles de yeso
con montantes
de madera?
¡Perfecto!
¡Perfecto!
PRECAUCIÓN:
NO instalar en
panel de yeso
solo
¿No está seguro?
Llame al Servicio de Atención al Cliente:
US: 800 359 5520 •
EMEA: +31 (0) 495 580 852 • UK: 0800 056 2853
?
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Secura QSF210 Installationsguide

Kategori
Platt skärmfästen
Typ
Installationsguide