Panasonic Stereo Integrated Amplifier SU-R1000 Bruksanvisningar

SU-R1000

Stereo Integrated Amplifier Operating Instructions

Stereo-Vollverstärker Bedienungsanleitung

Amplificateur Stéréo Intégré Mode d’emploi

Amplificatore stereo integrato Istruzioni per l’uso

Geïntegreerde Stereo Versterker Gebruiksaanwijzing

Amplificador Estéreo Integrado Instrucciones de funcionamiento

Integrerad Stereoförstärkare Bruksanvisning

Integreret stereoforstærker Betjeningsvejledning

Integroitu stereovahvistin Käyttöohjeet

Zintegrowany wzmacniacz stereo Instrukcja obsługi

02

Music is borderless and timeless, touching people’s

hearts across cultures and generations.

Each day the discovery of a truly emotive experience

from an unencountered sound awaits.

Let us take you on your journey to rediscover music.

03

Delivering the Ultimate Emotive Musical

Experience to All

At Technics we understand that the listening experience is not

purely about technology but the magical and emotional relationship

between people and music.

We want people to experience music as it was originally intended

and enable them to feel the emotional impact that enthuses and

delights them.

Through delivering this experience we want to support the

development and enjoyment of the world’s many musical cultures.

This is our philosophy.

With a combination of our love of music and the vast high-

end audio experience of the Technics team, we stand committed

to building a brand that provides the ultimate emotive musical

experience by music lovers, for music lovers.

Director

Michiko Ogawa

04

(04)

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

• About descriptions in these operating instructions

- Pages to be referred to are indicated as “ ○○”.

- The illustrations shown may differ from your unit.

For the United Kingdom and Ireland customer

Sales and Support Information

Customer Communications Centre

• For customers within the UK: 0333 222 8777

• For customers within Ireland: 01 447 5229

• Monday–Friday 9:00 am – 5:00 pm, (Excluding public holidays).

• For further support on your product, please visit our website: www.technics.com/uk/

High-Quality Audio Technologies

Employed integrated amplifier

The JENO Engine transmits and processes audio

signals in full digital and with minimal jitter from

the input stage to the power stage. GaN-FET

Driver for the linear speaker drive with high-

speed lossless switching, and ADCT (Active

Distortion Cancelling Technology) cancels the

noise precisely are implemented to achieve the

energetic dynamic sound with the superior drive

function.

The low-noise and clear sound can be provided

by the various technologies such as LAPC that

conducts speaker load adaptive phase calibration

for ideal gain and phase characteristics of any

type of connected speakers.

Low-noise power supply with high

responsive ability to the audio signal

“Advanced Speed Silent Power Supply” is

embedded for high-speed lossless switching

and noise reduction. The unique power supply

function can supply the stable power with the

lowest noise by the high speed switching feature

for the better resolution of audio signal in full

digital amplifier.

And this unit improves the potential of JENO

Engine for the better playback.

The unique digital technology

“Intelligent PHONO EQ” improves

the potential for playback of

records.

”Accurate EQ Curve” which has a hybrid

component for analogue and digital circuits

enables the equaliser process with high-precise

and S/N. And this unit supports the various

equaliser curve other than RIAA for accurate

playback.

“Crosstalk Canceller” function which measures

the crosstalk and optimises it with DSP, and

“PHONO Response Optimiser” function reduces

the resonances on the cartridge are implemented

to reproduce the audio signal from the record

groove.

Features

English

05

(05)

Table of contents

Safety precautions 06

Please carefully read the “Safety precautions” of this

manual before use.

Control reference guide 08

This unit, Remote control

Connections 12

Speaker connection, AC mains lead connection

Operations 13

Playing back connected devices

Settings 20

Other settings

Troubleshooting 25

Before requesting service, read the troubleshooting.

Others 28

Specifications, etc.

Accessories

AC mains lead (2)

K2CM3YY00041

Except for Switzerland

K2CS3YY00033

For Switzerland

Remote control (1)

N2QAYA000224

Batteries for remote control (2)

Calibration record (1)

TSPX101

&DOLEUDWLRQ5HFRUG

• Product numbers provided in these operating

instructions are correct as of October 2020.

• These may be subject to change.

• Do not use AC mains lead and calibration record

with other equipment.

Disposal of Old Equipment and Batteries

Only for European Union and countries

with recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used

electrical and electronic products

and batteries must not be mixed

with general household waste.

For proper treatment, recovery

and recycling of old products and

used batteries, please take them

to applicable collection points in

accordance with your national

legislation.

By disposing of them correctly, you

will help to save valuable resources

and prevent any potential negative

effects on human health and the

environment.

For more information about

collection and recycling, please

contact your local municipality.

Penalties may be applicable for

incorrect disposal of this waste,

in accordance with national

legislation.

Note for the battery symbol

(bottom symbol):

This symbol might be used in

combination with a chemical

symbol. In this case it complies

with the requirement set by the

Directive for the chemical involved.

06

Safety precautions

(06)

Warning

Unit

• To reduce the risk of fire, electric shock or

product damage,

- Do not expose this unit to rain, moisture,

dripping or splashing.

- Do not place objects filled with liquids, such

as vases, on this unit.

- Use only the recommended accessories.

- Do not remove covers.

- Do not repair this unit by yourself. Refer

servicing to qualified service personnel.

- Do not let metal objects fall inside this unit.

- Do not place heavy items on this unit.

AC mains lead

• To reduce the risk of fire, electric shock or

product damage,

- Ensure that the power supply voltage

corresponds to the voltage printed on this

unit.

- Insert the mains plug fully into the socket

outlet.

- Do not pull, bend, or place heavy items on the

lead.

- Do not handle the plug with wet hands.

- Hold onto the mains plug body when

disconnecting the plug.

- Do not use a damaged mains plug or socket

outlet.

• The mains plug is the disconnecting device.

Install this unit so that the mains plug can be

unplugged from the socket outlet immediately.

• Ensure the earth pin on the mains plug is

securely connected to prevent electrical shock.

- An apparatus with CLASS I construction shall

be connected to a mains socket outlet with a

protective earth connection.

Caution

Unit

• Do not place sources of naked flames, such as

lighted candles, on this unit.

• This unit may receive radio interference caused

by mobile telephones during use. If such

interference occurs, please increase separation

between this unit and the mobile telephone.

• This unit is intended for use in moderate and

tropical climates.

• Do not put any objects on this unit. This unit

becomes hot while it is on.

• Do not touch the top surface of this unit. This

unit becomes hot while it is on.

Placement

• Place this unit on an even surface.

• To reduce the risk of fire, electric shock or

product damage,

- Do not install or place this unit in a bookcase,

built-in cabinet or in another confined space.

Ensure this unit is well ventilated.

- Do not obstruct this unit’s ventilation

openings with newspapers, tablecloths,

curtains, and similar items.

- Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive

vibration.

• Ensure that the placement location is sturdy

enough to accommodate the weight of this unit

( 28).

• Do not lift or carry this unit by holding the

knobs. Doing so may cause this unit to fall,

resulting in personal injury or malfunction of

this unit.

Battery

• Danger of explosion if battery is incorrectly

replaced. Replace only with the type

recommended by the manufacturer.

• Mishandling of batteries can cause electrolyte

leakage and may cause a fire.

- Remove the battery if you do not intend to

use the remote control for a long period of

time. Store in a cool, dark place.

- Do not heat or expose to flame.

- Do not leave the battery(ies) in a car exposed

to direct sunlight for a long period of time

with doors and windows closed.

- Do not take apart or short circuit.

- Do not recharge alkaline or manganese

batteries.

- Do not use batteries if the covering has been

peeled off.

- Do not mix old and new batteries or different

types at the same time.

English

07

Safety precautions

(07)

• When disposing of the batteries, please contact

your local authorities or dealer and ask for the

correct method of disposal.

• Avoid the use in the following conditions

- High or low extreme temperatures during use,

storage or transportation.

- Replacement of a battery with an incorrect

type.

- Disposal of a battery into fire or a hot oven, or

mechanically crushing or cutting of a battery,

that can result in an explosion.

- Extremely high temperature and/or extremely

low air pressure that can result in an explosion

or the leakage of flammable liquid or gas.

Installation

Unit

Turn off all equipment before connection and

read the appropriate operating instructions.

• For the dimensions of this unit ( 28)

• Refer to the following figure for the dimensions

of this unit’s legs.

A

B

Front

A: 340 mm

B: 313 mm

Calibration record

• Though the record may be warped depending

on the storage environment or usage due to

its characteristics, this record is designed to be

played back for “Cartridge Optimiser” even if

there is a trivial warp.

• Stand this record as straight up for storage.

Stacking the records in piles or inclining the

record for storage may cause the warp on the

record.

For the United Kingdom and Ireland

customer

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text

carefully.

This appliance is supplied with a moulded three

pin mains plug for your safety and convenience.

A 10-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please

ensure that the replacement fuse has a rating of

10-ampere and that it is approved by ASTA or

BSI to BS1362.

Check for the ASTA mark

or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover you

must ensure that it is refitted when the fuse is

replaced.

If you lose the fuse cover the plug must not be

used until a replacement cover is obtained.

A replacement fuse cover can be purchased from

your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to

the type of AC mains plug (figures A and B).

Confirm the AC mains plug fitted and follow the

instructions below.

Illustrations may differ from actual AC mains

plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse

cover.

Figure A Figure B

Fuse

(10 ampere)

Fuse

(10 ampere)

08

Control reference guide

This unit

(08)

  

 



  

01 Standby/on button ( )

[

] (off): The unit is off.

[

] (on): The unit is on.

• The unit is still using a small amount of

power in off mode. Off mode uses less

power.

02 Power indicator

• Blue: The unit is on.

• Off: The unit is off.

03 Headphones jack

• When a plug is connected, the speakers and

REC OUT/PRE OUT terminals do not output

sound. ( 19)

• Sound is not output from headphones jack

while “MAIN IN” is selected as input source

of this unit. ( 18)

• Excessive sound pressure from earphones

and headphones can cause hearing loss.

• Listening at full volume for long periods may

damage the user’s ears.

04 Volume knob

• -- dB (min), -88.0 dB to 0 dB (max)

05 Display

• Information such as input source, etc. is

displayed. ( 26)

• The input source blinks on the display before

starting up this unit after turning on. (No

sound outputs while blinking.)

06 Input selector knob

• Turn this knob clockwise or anticlockwise to

switch the input source.

07 Peak power meter

• Display the output level. 100 % is the rated

output ( 28).

• Peak power meter does not work while the

light is turned off by pressing [DIMMER],

connecting the headphones, etc.

08 LAPC indicator

( 22)

09 Remote control signal sensor

• Reception distance: Within approx. 7 m

directly in front

• Reception angle: Approx. 30° left and right

English

09

Control reference guide

(09)





 

 



   

 

10 Speaker output terminals

( 12)

11 Analogue audio input terminals (REC IN)

( 15, 19)

12 Analogue audio output terminals

(REC OUT)

( 19)

13 Analogue audio output terminals

(PRE OUT)

( 19)

14 Analogue audio input terminals

(MAIN IN)

( 18)

15 Analogue audio input terminals

(LINE XLR BALANCED/LINE1/LINE2)

( 15)

16 Analogue audio input terminals

(PHONO XLR BALANCED/PHONO) /

PHONO EARTH terminal

( 16)

• PHONO EARTH terminal is for connecting

the ground wire of a turntable.

• Please use the cable less than 3 m.

• Keep the PHONO short pins out of reach of

children to prevent swallowing.

17 USB-B terminals (PC1/PC2)

( 14)

18 USB-A terminal (UPDATE)

(

DC 5 V 500 mA)

( 23)

19 System terminal (CONTROL)

( 24)

20 Optical digital input terminals

(OPT1/OPT2)

( 13)

21 Coaxial digital input terminals

(COAX1/COAX2)

( 13)

22 Product identification marking

• The model number is indicated.

23 AC IN terminal (

)

( 12)

10

Control reference guide

Remote control

(10)



































Using the remote control

2

1

R03/LR03, AAA

(Alkaline or manganese batteries)

Note

• Insert the battery so the terminals (

and )

match those in the remote control.

• Point it at the remote control signal sensor on

this unit. ( 08)

• Keep the batteries out of reach of children to

prevent swallowing.

01 [

]: Standby/on button

• Press to switch the unit from on to standby

mode or vice versa. In standby mode, the

unit is still consuming a small amount of

power.

02 Switch the input source

( 13, 14, 15, 16, 19)

11

English

Control reference guide

(11)

03 [MENU]: Enter menu ( 13, 14, 15, 16, 18)

04 [

], [ ], [ ], [ ]/[OK]: Selection/OK

05 [SETUP]: Enter setup menu ( 20)

06 [BASS]/[MID]/[TREBLE]: Adjust the tonal

range (BASS/MID/TREBLE).

• Press [

], [ ] to adjust the tone.

07 [DIRECT]: Turn on/off Direct mode

08 [LAPC]: Measure the output signal of the

amplifier when speakers are connected,

and correct its output ( 22)

09 [DIMMER]: Adjust the brightness of the

peak power meter light, display, etc.

• When the display is turned off, it will

light up for a few seconds only when you

operate this unit. Before the display turns

off, “Display Off” will be displayed for a few

seconds.

• Press repeatedly to switch the brightness.

• Peak power meter does not work while the

light is turned off.

10 [INFO]: View content information

• Press this button to display sampling

frequency and other information. (The

information varies depending on the input

source.)

11 [RETURN]: Return to the previous display

12 [MUTE]: Mute the sound

• Press [MUTE] again to cancel. “MUTE” is

also cancelled when you adjust the volume

with this unit or when you turn the unit to

standby.

13 [CURVE]: Enable the PHONO equaliser

curve.

14 [+VOL-]: Adjust the volume

• Volume range:

-- dB (min), -88.0 dB to 0 dB (max)

■ Buttons that work for Technics devices

supporting system control function

The remote control of this unit also works for

Technics devices supporting system control

function (Network Audio Player, Compact Disc

Player, etc.). For information on the operations of

the devices, please also refer to their operating

instructions.

01

Numeric buttons, etc.

02

Playback control buttons

Remote control mode

When other equipment responds to the supplied

remote control, change the remote control

mode.

• The factory default is “Mode 1”.

1 Press [SETUP].

2 Press [

], [ ] repeatedly to select

“Remote Control” and then press

[OK].

• The current remote control mode of this unit

is displayed for a few seconds.

3 When “Set Mode 1/2” is displayed,

change the remote control mode of

the remote control.

To set “Mode 1”:

Press and hold [OK] and [1] for at least

4 seconds.

To set “Mode 2”:

Press and hold [OK] and [2] for at least

4 seconds.

4 Point the remote control at this unit,

and press and hold [OK] for at least

4 seconds.

• When the remote control mode is changed,

the new mode will appear on the display for

a few seconds.

■ When “Remote 1” or “Remote 2” is

displayed

When “Remote 1” or “Remote 2” is displayed,

the remote control modes of this unit and

remote control are different. Perform step 3

above.

12

Connections

Speakers/AC mains lead

(12)

• Use only the supplied AC mains lead.

• Insert the plugs of the cables to be connected all the way in.

• Do not bend cables at sharp angles.

• To optimise the audio output, you can measure the amplifier output signal and correct its

output when it is connected to the speakers. ( 22)

Speaker connection

Speakers

Speaker cables

(not supplied)

1 Turn the knobs to

loosen them, and

insert the core wires

into the holes.

2 Tighten the knobs.

Note

• When the connections are completed, pull the

speaker cables lightly to check that they are

connected firmly.

• Be careful not to cross (short-circuit) or reverse

the polarity of the speaker wires as doing so

may damage the amplifier.

DO NOT

• Wire the polarity (+/-) of the terminals correctly.

Not doing so may adversely affect stereo

effects or cause malfunction.

• For details, refer to the operating instructions of

the speakers.

• Though the spade plug (A: 16 mm or less, B:

8 mm or more) can be connected, some plug

may not be connected depending on the shape

of plug.

AB

AC mains lead connection

Connect only after all other connections are

completed.

To a household

mains socket

AC mains lead

(supplied)

Insert the AC mains lead up to a

point just before the round hole.

Note

• This unit consumes a small amount of AC power

( 28) even when the unit is in standby mode.

Remove the plug from the main electrical outlet

if you will not be using the unit for an extended

period of time. Place the unit so the plug can be

easily removed.

13

English

Connections / Operations

(13)

Operations

Using digital audio output device

Optical digital

audio cable

(not supplied)

CD player, etc.

Coaxial digital cable

(not supplied)

Using coaxial digital cable

1 Disconnect the AC mains lead.

2 Connect this unit and a CD player, etc.

3 Connect the AC mains lead to this unit.

( 12)

4 Press the unit on/off button to the

[

] position.

5 Press [COAX] to select

“COAX1”/“COAX2”.

• You can also select the input source by

turning the input selector knob on the unit.

6 Start playback on the connected

device.

Note

• The digital audio input terminals of this unit can

only detect the following linear PCM signals.

For details, refer to the operating instructions of

the connected device.

- Sampling frequency:

Coaxial digital input

32/44.1/48/88.2/96/176.4/192 kHz

You can connect the CD player, etc. with coaxial digital cable (not supplied)/optical

digital audio cable (not supplied) to this unit and play back music.

Optical digital input

32/44.1/48/88.2/96 kHz

- Number of quantisation bits:

16/24 bit

Using optical digital audio cable

1 Disconnect the AC mains lead.

2 Connect this unit and a CD player, etc.

3 Connect the AC mains lead to this unit.

( 12)

4 Press the unit on/off button to the

[

] position.

5 Press [OPT] to select “OPT1”/“OPT2”.

• You can also select the input source by

turning the input selector knob on the unit.

6 Start playback on the connected

device.

Adjusting the delay time of the

sound

Set to “Low Latency” to adjust the delay time of

the sound while “LAPC” is set to “On”.

1 Press [MENU].

2 Press [OK].

3 Press [

], [ ] to select “Normal”/“Low

Latency” and then press [OK].

• Depending on the track, it may not be effective

even when setting.

MQA

®

decoding

An MQA file or stream can be decoded to deliver

the sound like the original master recording.

( 20)

14

(14)

Operations

Using PC, etc.

You can connect the PC, etc. or another device with USB 2.0 cable (not supplied) to

this unit and play back music.

PC, etc.

USB 2.0 cable

(not supplied)

Audio device with USB output

terminal such as ST-G30, etc.

■ Preparation

Connecting to a PC

• Before connecting to a PC, follow the steps

below.

• Refer to the following for the recommend OS

versions for your PC (as of October 2020):

- Windows 8, Windows 8.1, Windows 10

- OS X 10.7, 10.8, 10.9, 10.10, 10.11,

macOS 10.12, 10.13, 10.14, 10.15

Download and install the dedicated USB driver

to the PC. (Only for Windows OS)

• Download and install the driver from the

website below.

www.technics.com/support/

Download and install the dedicated app

“Technics Audio Player” (free of charge) on

your PC.

• Download and install the app from the

website below.

www.technics.com/support/

1 Disconnect the AC mains lead.

2 Connect this unit and a PC, etc.

3 Connect the AC mains lead to this unit.

( 12)

4 Press the unit on/off button to the

[

] position.

5 Press [PC] to select “PC1”/“PC2”.

• You can also select the input source by

turning the input selector knob on the unit.

6 Start playback using the dedicated

app “Technics Audio Player” on the

connected PC.

Note

• When connecting an audio device with USB

output terminal such as ST-G30, etc., refer to

the operating instructions of the connected

device.

• About supported format, refer to “Format

support”. ( 28)

Adjusting the delay time of the

sound

Set to “Low Latency” to adjust the delay time of

the sound while “LAPC” is set to “On”.

1 Press [MENU].

2 Press [OK].

3 Press [

], [ ] to select “Normal”/“Low

Latency” and then press [OK].

• Depending on the track, it may not be effective

even when setting.

MQA decoding

An MQA file or stream can be decoded to deliver

the sound like the original master recording.

( 20)

15

English

Operations

Using analogue audio output device

(15)

Analogue audio cable

(not supplied)

*

Blu-ray Disc player, etc.

*

: The illustration shows the example when

connecting with analogue audio cable. You

can also connect the device with XLR cable.

You can connect the Blu-ray Disc player, etc. with

analogue audio cable (not supplied) to this unit

and play back music.

1 Disconnect the AC mains lead.

2 Connect this unit and a Blu-ray Disc

player, etc.

3 Connect the AC mains lead to this unit.

( 12)

4 Press the unit on/off button to the

[

] position.

5 Press [LINE-XLR] or [LINE] to select

“LINE XLR”/“LINE1”/“LINE2”.

• You can also select the input source by

turning the input selector knob on the unit.

6 Start playback on the connected

device.

When the recorder is connected to

this unit

When connecting a recording equipment to this

unit, use the analogue audio cable (not supplied)

and connect REC IN terminal with the audio

output terminals of the connected equipment,

connect REC OUT terminals with the audio input

terminals of the connected equipment. ( 19)

• Press [REC IN] to switch the input source to

“REC IN”.

Minimising sound distortion

If sound distortion occurs when using the

analogue audio input terminals, setting the

attenuator to “On” may improve the sound

quality.

• The factory default is “Off”.

1 Press [MENU].

2 Press [

], [ ] repeatedly to select

“Attenuator” and then press [OK].

3 Press [

], [ ] to select “On” and then

press [OK].

Reducing low frequency noise

Reduces the low frequency noise caused by the

warpage of record.

• The factory default is “Off”.

1 Press [MENU].

2 Press [

], [ ] repeatedly to select

“Subsonic Filter” and then press [OK].

3 Press [

], [ ] to select “On” and then

press [OK].

16

Operations

Using turntable

(16)

PHONO cable (not supplied)

*

PHONO earth lead

(not supplied)

Turntable

*

: The illustration shows the example when

connecting with PHONO cable. You can also

connect the device with PHONO-XLR cable.

1 Disconnect the AC mains lead.

2 Connect this unit and a turntable.

• Remove the PHONO short pins when

connecting to the analogue audio input

terminals (PHONO).

• PHONO terminals for connecting the

turntable supports MM/MC type cartridge.

(PHONO XLR terminals only supports MC

type cartridge.)

3 Connect the AC mains lead to this unit.

( 12)

4 Press the unit on/off button to the

[

] position.

5 Press [PHONO-XLR] or [PHONO] to

select “PHONO XLR”/“PHONO”.

• You can also select the input source by

turning the input selector knob on the unit.

6 Start playback on the connected

turntable.

• When connecting a turntable with a built-in

PHONO equaliser, use the analogue audio

cable to connect to the analogue audio input

terminals (LINE1 or LINE2) of this unit. ( 15)

• When connecting a turntable with a PHONO

earth lead, connect the PHONO earth lead to

the PHONO EARTH terminal of this unit.

Selecting the cartridge type

Select the settings (MM/MC) to fit the cartridge

type of the connected turntable.

1 Press [MENU].

2 Press [

], [ ] repeatedly to select

“MM/MC” and then press [OK].

3 Press [

], [ ] to select “MM”/”MC”

and then press [OK].

• Not available when “PHONO XLR” is selected as

input source. (The setting is fixed to “MC”.)

• When “MM/MC” is adjusted, “Cartridge

Optimiser” is fixed to “Off”. Set “Cartridge

Optimiser” again or select the registered data

correspond with “MM/MC”. ( 17)

Adjusting the audio input level

If sound distortion occurs or the input level is low

when using the analogue audio input terminals,

adjusting the gain may improve the sound

quality.

1 Press [MENU].

2 Press [

], [ ] to select “Gain” and

then press [OK].

3 Press [

], [ ] to adjust and then press

[OK].

• When “Gain” is adjusted, “Cartridge Optimiser”

is fixed to “Off”. Set “Cartridge Optimiser”

again or select the registered data correspond

with “Gain”. ( 17)

Optimising the character of

cartridge

This unit measures and optimises the crosstalk

and frequency characteristics of cartridge by

playing the supplied calibration record on the

connected turntable.

• Depending on the “Cartridge Optimiser”

setting, “REC OUT” turns to “Off” and the

sound does not output from the analogue

output terminals (REC OUT).

■ Preparation

• Connect the PHONO earth lead of the turntable

to the PHONO EARTH terminal of this unit.

• Set “MM/MC” of this unit in accordance with

the cartridge type of the turntable.

• Set “Gain” of this unit in accordance with the

cartridge of connected turntable.

17

English

Operations

(17)

1 Press [MENU].

2 Press [

], [ ] repeatedly to select

“Cartridge Optimiser” and then press

[OK].

3 Press [

], [ ] to select “Measurement

Start” and then press [OK].

• “Prepare Calibration Record” is displayed.

4 Start playback the calibration record

on the connected turntable and then

press [OK].

• Play the outer track first on the calibration

record which has 2 tracks on both sides

(approx. 3 minutes). Play another track if the

optmisation does not start properly.

• The speakers output a test tone.

• Measurement starts for the data of

“Crosstalk Canceller” and “Response

Optimisation”.

5 After displaying “Lift up the tone

arm”, stop the playback of calibration

record and press [OK].

• The measured data processing starts (approx.

10 minutes).

6

After displaying “Completed”, press [OK].

7 After displaying “Register 1 - 3”, press

[OK] and then [ ], [ ] to select the

data to store.

• The optimised data can be stored up to 3

type. The data is overwritten when selecting

the already registered data.

8 Press [OK].

• “Registered” is displayed.

9

(When naming the data)

After displaying “Rename?”, press

[OK].

• When the name is not edited, press [ ] to

exit. The measurement completes and the

optimised data is registered.

10

Press [ ], [ ], [ ], [ ] to enter the

name and then press [OK] to exit the

setting.

• The edited name is stored, the measurement

completes and the optimised data is

registered.

■ “Crosstalk Canceller”/

”Response Optimisation”

Press [MENU].

Press [ ], [ ] to select “Cartridge Optimiser”

and then press [OK].

Press [ ], [ ] to select the registered data

and then press [

].

Press [ ], [ ] to select “Crosstalk

Canceller”/”Response Optimisation” and then

press [OK].

Press [ ], [ ] to select “On”/“Off” and then

press [OK].

• “Crosstalk Canceller”:

Reduces the crosstalk occurs on the cartridge.

• “Response Optimisation”:

Optimises the resonance occurs on the

cartridge and cable, also adjusts the right and

left balance.

■ Call up the registered setting

Press [MENU].

Press [ ], [ ] to select “Cartridge Optimiser”

and then press [OK].

Press [ ], [ ] to select the registered data

and then press [OK].

■ Edit the name

Press [MENU].

Press [ ], [ ] to select “Cartridge Optimiser”

and then press [OK].

Press [ ], [ ] to select the registered data,

then press and hold [OK].

Press [ ], [ ], [ ], [ ] to enter the name and

then press [OK].

• Only ASCII characters can be used.

• “A” can be added when you press the [

] at

the time of the last letter is selected.

• Press [CLEAR] to delete a letter.

Switching the PHONO equaliser

curve

You can switch the equaliser curve of this unit.

This unit supports the simulated equaliser curve

before unifying to RIAA.

• The factory default is “RIAA”.

1 Press [MENU].

2 Press [

], [ ] repeatedly to select “EQ

CURVE” and then press [OK].

3 Press [

], [ ] to select the equaliser

setting and then press [OK].

• You can also switch the equaliser curve by

pressing [CURVE].

Reducing low frequency noise

Reduces the low frequency noise caused by the

warpage of record. ( 15)

18

Operations

Using this unit as power amplifier

(18)

Set the volume of the AV receiver,

control amplifier, etc. to minimum before

connecting.

While using this unit as power amplifier,

the volume adjustment with this unit is

disabled. Adjust the volume little by little

with the connected device.

Do not input the audio signal from REC

OUT/PRE OUT terminals to the MAIN IN

terminals of this unit. Doing so may cause

malfunction.

AV receiver, control

amplifier, etc.

Analogue audio cable

(not supplied)

1 Disconnect the AC mains lead.

2 Connect this unit and AV receiver,

control amplifier, etc. after minimising

the volume of the device.

3 Connect the AC mains lead to this

unit. ( 12)

4 Press the unit on/off button to the

[

] position.

5 Press [SETUP].

6 Press [

], [ ] repeatedly to select

“MAIN IN” and then press [OK].

7 Press [

], [ ] to select “On” and press

[OK].

8 Confirm the displayed message and

press [OK].

9 Press [

], [ ] to select “Yes” and then

press [OK].

10 Start playback on the connected

device.

Note

• It is not possible to adjust the volume with this

unit.

• Sound is not output from headphones jack and

REC OUT/PRE OUT terminals.

Minimising sound distortion

If sound distortion occurs, setting the attenuator

to “On” may improve the sound quality.

• The factory default is “Off”.

1 Press [MENU].

2 Press [OK].

3 Press [

], [ ] to select “On” and then

press [OK].

You can connect the AV receiver, control amplifier, etc. with analogue audio cable (not

supplied) to this unit and use this unit as power amplifier.

19

English

Operations

(19)

Using analogue audio input device

Do not input the audio signal from REC

OUT/PRE OUT terminals to the analogue

audio input terminals of this unit. Doing so

may cause malfunction.

Connecting a power amplifier,

subwoofer, etc.

You can connect the power amplifier, subwoofer,

etc. with analogue audio cable (not supplied) to

output the analogue audio signals.

Analogue audio cable

(not supplied)

Power amplifier,

Subwoofer, etc.

1 Disconnect the AC mains lead.

2 Connect this unit and a power

amplifier, subwoofer, etc.

3 Connect the AC mains lead to this unit.

( 12)

4 Press the unit on/off button to the

[

] position.

Note

• For details, refer to the operating instructions of

the connected device.

• The audio signal output from the power

amplifier, subwoofer, etc. connected to PRE

OUT terminals can be enable/disable. ( 21)

Connecting a recording equipment

When connecting a recording equipment to this

unit, use the analogue audio cable (not supplied)

and connect REC IN terminal with the audio

output terminals of the connected equipment,

connect REC OUT terminals with the audio input

terminals of the connected equipment.

• Press [REC IN] to switch the input source to

“REC IN”.

Analogue audio cable

(not supplied)

Recording equipment

Recording input

terminals

(REC IN, AUX IN)

1 Disconnect the AC mains lead.

2 Connect this unit and a recording

equipment.

3 Connect the AC mains lead to this unit.

( 12)

4 Press the unit on/off button to the

[

] position.

Note

• The choppy audio occurs in output audio signal

when switching the input source.

• The audio signal output from recording

equipment connected to REC OUT terminals

can be enable/disable. ( 21)

20

(20)

Settings

Sound adjustment, Other settings

1 Press [SETUP].

2 Press [

], [ ] repeatedly to select the menu and then press [OK].

3 Press [

], [ ], [ ], [ ] to select a desired item or value, and press [OK].

The sound effects and other settings can be set up.

Adjusting BASS/MID/TREBLE

“Tone Control”

The tone can be adjusted by pressing [BASS]/

[MID]/[TREBLE].

• The tone adjustment is enabled by pressing

[BASS]/[MID]/[TREBLE] and “Tone Control” is

set to “On”.

• Each level can be adjusted between “-10” and

“+10”.

• While connecting Technics device supporting

system control function (Network Audio

Player, etc.) to this unit, sound setting on the

connected device may have a priority over this

unit. Adjust the sound with the connected

device.

• Not available when using this unit as power

amplifier ( 18). Adjust the sound with the AV

receiver, control amplifier, etc.

• Set “Tone Control” to “Off” to cancel the

adjustment of “BASS”, “MID” and “TREBLE”.

Adjusting balance of speakers

“Balance L/R”

Adjusts the balance of the output from left and

right speakers.

• Each level can be adjusted between 18 dB (L)

and 18 dB (R).

• The audio output from the connected

headphones and PRE OUT terminals are also

adjusted.

• While using this unit as power amplifier ( 18),

this setting is disabled. Adjust the setting with

the connected device.

Adjusting the volume attenuator

“VOLUME Attenuator”

Set to “On (-20dB)” for the attenuator to ease

the volume adjustment at a low volume.

• The factory default is “Off”.

• ”ATT” is displayed after setting.

• Not available when using this unit as power

amplifier ( 18). Adjust the sound with the AV

receiver, control amplifier, etc.

MQA decoding

“MQA Decoding”

This unit includes the MQA (Master Quality

Authenticated) technology, which enables

playback of MQA audio files and streams,

delivering the sound like the original master

recording.

The built-in MQA decoder will restore the

highresolution signal heard in the studio and

confirm it, using the authentication signature.

Visit

www.mqa.co.uk/customer/mqacd for more

information.

To deliver the sound like the original master

recording, MQA decoding function needs to be

set to “On”.

• “MQA”, “MQA Studio”, etc. are displayed while

playing back the MQA audio files and streams.

Selecting the speaker terminals to

output

“SPEAKERS”

Select the speaker terminals from which audio

will be output.

• The factory default is “A”.

Sidan laddas...

Panasonic Stereo Integrated Amplifier SU-R1000 Bruksanvisningar

Denna manual är också lämplig för

Panasonic Stereo Integrated Amplifier SU-R1000 Bruksanvisningar

på andra språk

Relaterade papper

Andra dokument