Andersson CAM 1.5 Användarmanual

User manual

English | Svenska | Norsk

Contents. Innehållsförteckning. Register

English

Warning 4

Chapter 1: Product components 5

Chapter 2: Getting started 6

Chapter 3: Buttons and Screen Icons 7

Chapter 4: Operation 9-11

Chapter 5: Playback 12

Chapter 6: Settings 13

Chapter 7: Connections 14

Chapter 8: Trouble shooting 15

Chapter 9: Speciﬁcations 16

Svenska

Varning 18

Kapitel 1: Produktkomponenter 19

Kapitel 2: Komma igång 20

Kapitel 3: Knappar och skärmikoner 21

Kapitel 4: Inspelning 23-25

Kapitel 5: Uppspelning 26

Kapitel 6: Inställningar 27

Kapitel 7: Kopplingar 28

Kapitel 8: Problemlösning 29

Kapitel 9: Speciﬁkationer 30

Contents. Innehållsförteckning. Register

Norsk

Advarsel 32

Kapittel 1: Produktkomponenter 33

Kapittel 2: Komme i gang 34

Kapittel 3: Knapper og symboler 35

Kapittel 4: Opptaksfunksjon 37-39

Kapittel 5: Avspillingsfunksjon 40

Kapittel 6: Innstillinger 41

Kapittel 7: Tilkoblinger 42

Kapittel 8: Feilsøking 43

Kapittel 9: Spesiﬁkasjoner 44

4

Warning

Do not drop, puncture or disassemble the camera.

Use the camera with care. Rough handling may dam-

age the internal components.

Do not expose the camera to high temperature. Avoid

contact with water.

Please notice that the camera body may become

warm when operating it for an extended period.

Test for proper operation before using the camera.

Only use accessories supplied by the manufacturer.

Use only the type of battery that came with your cam-

era.

Remove the battery if the camera is not going to be

used for long periods.

Tele

Wide

Digital Light

Return

Volume down

Forward

Playback/Stop

Delete

Photo

Pause

Video

REMOTE CONTROL

English Svenska Norsk

5

Chapter 1: Product components

Lens

Video button

Self-timer LED

Microphone

External lens/

ﬁlter mount

Pause button

Speaker

Tripod socket

Battery/SD card cover

Stabilization button

Photo button

Tele/Wide button

Power button

HDMI connection

Indicator light

Mini USB 2.0

connection

LCD Touch panel

FRONT VIEW SIDE/REAR VIEW

BOTTOM VIEW

6

Chapter 2: Getting started

Loading the battery

Before using the camera, you must load the Lithium-

ion rechargeable battery. Insert the battery according

to the correct polarity marks ( + or -). Close the battery

cover ﬁrmly.

Charge the battery

When the camera is turned OFF, use the supplied

AC charger or the USB cable. The full charge time is

about 4 to 5 hours.

The blinking light conﬁrms that the camera is currently

charging, and it shines steady when the charging is

completed. In AC charging mode, the light will turn

itself off automatically after 3-5 minutes.

Inserting and Removing an SD Card

The camera comes with an internal memory that al-

lows you to store photos and videos. You can ex-

pand the memory capacity by using a SD memory

card.

Insert the memory card into its slot (see bottom

view). To remove the installed SD card, press the

card inward to release it.

Turn on the camera

Flip out the LCD panel or press the Power button.

Conﬁguring the Initial Date and Time Setup

The time setting screen appears to allow you to set

date and time:

1. Touch Year, Month, Day, Hour, Minute, and AM/

PM to set.

2. Adjust the numeric value by touching /

3. Touch the OK icon to validate the setting.

4. Touch the Exit icon ( ) to exit.

Quick guide

To record video: Press the Video button to record

and stop.

To pause recording: Press the Pause button.

To take a photo during video recording: Press the

Photo button to capture the image. The Snapshot

icon ( ) appears on the LCD monitor.

To take a photo: Press the Photo button halfway

down until the focusing frame changes from white

to green (see image below). Then, press it fully down

to take photo.

English Svenska Norsk

7

Chapter 3: Buttons and Screen Icons

Video button:

1. Press to record

2. Press again to stop

Photo button:

1. Press to take photo

2. In video mode to capture the image

Tele button/Wide button:

1. Zoom in

2. Zoom out

Power button:

Press to turn the camera on and off

Pause Button:

1. Press to pause the recording.

2. Press again to continue.

Stabilization Button:

Stabilization On/Off.

Screen Icons and list of explanations:

1

Video Resolution

Full HD (1080p 30 fps)

HD (720p 60 fps)

HD (720p 30 fps)

VGA (640X480)

Slow Motion (432x240)

8

1

Photo Resolution

16MP

5MP

3MP

2

00:05:30

Video recording time that

can still be taken at current

resoultion

72

Number of images that can

still be taken at current reso-

lution

3 LCD Anti-Glare On

Scene

4

Skin

Night

Backlight

Black/White

Classic

Negative

5

Daylight

Fluorescent

Tungsten

6 Macro Focusing On

7 Stabilization

8

Pre-record Mode

Time Lapse

9

Digital Light On

Light On

10 SD Card Inserted

11

1. Motion detection

2. Zoom meter (1x-1440x)

12

Snapshot

Self-timer enabled

13

Battery:

1. Full power

2. Empty

DC Power mode

14 Playback Mode On

15 Menu On

English Svenska Norsk

9

Video recording

Press the Video button to start recording. When a

video is being recorded, a time indicator will be dis-

play on the LCD monitor. To stop recording, press the

Video button again.

Press the Playback button or touch on the screen to

view the recorded video. Four resolution settings are

available: Full HD, HD+, HD and VGA.

Taking photographs

Press the Photo button halfway down until the focus-

ing frame turns from white to green. Then, press it fully

down to take photo.

Press the Playback button or touch on the screen to

view the photos. Three resolution settings are avail-

able: 16, 5 and 3 Mega Pixels.

Using the zoom

1. To zoom in/out, press the Tele/Wide Button.

2. It can be set from 1X~1440X (12X Optical zoom and

120X Digital zoom).

Using Stabilization

1. Press the Stabilization button in record mode. The

Stabilization icon ( ) appears on the LCD monitor.

2. Press the Video button to start recording.

RECORD MODE

1. Touch to see the menu on the screen.

2. Sweep your ﬁnger do see the options:

Video, Photo,

and

Setting.

VIDEO

1. Touch on the screen in record mode. The menu

will show on the screen.

2. Sweep your ﬁnger do see the options:

Resolution,

Light, Scene, White Balance, Pre-record, Motion De-

tect, Slow Motion,

and

Time Lapse.

Resolution

1. In the Video menu, touch on the screen.

2. Touch to select the desired option.

3. Touch the OK icon and to exit.

Light

Light ON: The light will be turned on.

Digital Light: To extend the dynamic range for back-

light and high contrast so that the objects will be

brighter and clearer.

Light OFF: The light is turned off.

1. In the Video menu, touch on the screen.

2. Touch to select the desired option.

3. Touch the OK icon to validate and to exit.

Chapter 4: Operation

10

Chapter 4: Operation

Scene

You can select the mode according to the conditions.

- Auto: No special effects on the image.

- Skin: Makes skin tones more natural.

- Night: Use for night scenes or low light conditions.

- Backlight: Use if bright light is behind the subject.

- Black/White: Converts the photo to black-and-white.

- Classic: Converts the photo to a sepia look.

- Negative: Photo looks like a negative.

1. In the Video menu, touch the scene icon.

2. Touch to select the desired option.

3. Touch the OK icon to validate and to exit.

White Balance

Three white balance settings are available:

- Auto: Automatically adjusts the white balance.

- Daylight: When outdoors.

- Fluorescent: Under ﬂuorescent light conditions.

- Tungsten: Under tungsten light conditions.

1. In the Video menu, touch the white balance icon.

2. Touch to select the desired option.

3. Touch the OK icon to validate and to exit.

Pre-record

This function ensures that you will not miss any critical

recording opportunities. The videos are recorded 3

seconds more before the [Video Button] is pressed.

1. In the Video menu, touch on the screen.

2. Touch the slider to select on or off.

3. Touch to exit.

Motion Detection

Records videos automatically when the camera de-

tects a movement.

1. In the Video menu, touch on the screen.

2. Touch the slider to select on or off.

3. Touch to exit.

Slow Motion

Record videos with slow motion effect. When the

video is played, the playback time will be longer than

the actual recording time.

1. In the Video menu, touch on the screen.

2. Touch the slider to select on or off.

3. Touch to exit.

Time Lapse

Record still images at speciﬁc intervals and then play

them as one video ﬁle.

- Off: Disable Time Lapse.

- 1 Second: Record one frame per second.

- 3 Seconds: Record one frame every 3 seconds.

- 5 Seconds: Record one frame every 5 seconds.

English Svenska Norsk

11

1. In the Video menu, touch on the screen.

2. Touch to select the desired option.

3. Touch the OK icon to validate and to exit.

PHOTO

1. Touch on the screen in Record Mode. The menu

will show on the screen.

2. Swipe the menu screen to change the page.

3. The photo submenu contains 5 options:

Resolution,

Smile Detection, Date Printing, ISO

and

Self-Timer.

Photo Resolution

Three resolution settings are available.

- 16MP: Shoot photo at 4608 x 3456, 16MP quality.

- 5MP: Shoot photo at 2592 x 1944, 5MP quality.

- 3MP: Shoot photo at 2048 x 1536, 3MP quality.

1. In the Photo menu, touch on the screen.

2. Touch to select the desired option.

3. Touch the OK icon to validate and to exit.

Smile Detection

The camera captures images automatically when it

detects a smile.

1. In the Photo menu, touch on the screen.

2. Touch the slider to select on or off.

3. Touch to exit.

Date Printing

Imprint the date and time on the video and photo.

1. In the Photo menu, touch the Date Printing icon.

2. Touch the slider to select on or off.

3. Touch to exit.

ISO

The camera adjusts the ISO sensitivity automatically.

Four manual ISO sensitivity settings are available:

800/1600/3200/6400. The larger the number is, the

higher the ISO sensitivity is. Select a small number to

get a smoother image. Select a large number when

photographing in a dark location or subjects moving

at high speed.

1. In the Photo menu, touch the ISO icon on the screen.

2. Touch to select the desired option.

3. Touch the OK icon to validate and to exit.

Self-Timer

Allows you to take photos with a ten-second time de-

lay. The self-timer light on the front of the camera will

blink. The speed of blinking will increase just before

the photo is taken.

1. In the Photo menu, touch on the screen.

2. Touch the slider to select on or off.

3. Touch to exit.

Chapter 4: Operation

12

Chapter 5: Playback

OPERATIONS FOR PLAYBACK MODE

1. Press the Playback button or touch on the

screen to switch to the Playback mode.

2. Select the desired option by touching the screen.

3. Touch to back to Record Mode

VIDEO PLAYBACK

1. In the Video Playback mode, touch the play/ pause

icons to play or pause the videos.

2. Sweep to the right or touch to see the previous

video; sweep to the left or touch to see the next

video.

3. Touch / to fast rewind/fast forward.

4. Touch the bar to increase or reduce the volume.

5. Touch to exit.

Delete Videos

1. Touch to go to the Delete option screen.

2. Touch Yes to delete the current video or No to can-

cel and exit; touch All to delete all videos.

3. Before all videos are about to be deleted, a conﬁr-

mation screen will appear; touch Yes to execute the

operation and No to cancel.

PHOTO PLAYBACK

1. Sweep to the right or touch to see the previous

photo; sweep to the left or touch to see the next

photo.

2. When a photo is selected, press to magnify.

3. To navigate the magniﬁed photo, press on the

screen and move as well.

4. Press the Wide button to zoom out or exit the mag-

niﬁcation mode.

5. Touch / to start or to stop the slide show.

6. Touch to exit.

Delete Photo

1. Touch to go to the Delete option screen.

2. Touch Yes to delete the current photo or No to can-

cel and exit; touch All to delete all photos.

3. Before all videos are about to be deleted, a conﬁr-

mation screen will appear; touch Yes to execute the

operation and No to cancel.

English Svenska Norsk

13

SETTINGS MENU

1. Touch to see the menu on the screen.

2. Swipe on the menu screen to change the page.

3. The setting submenu contains 8 options:

Macro

Mode, Sound (operation sound), Anti-Glare, TV, Lan-

guage, Time Setting, Format, and Default Setting

.

Macro Mode

Select modes for recording close-up video and photo.

1. In the Setting menu, touch on the screen.

2. Touch the slider to select on or off.

3. Touch to exit.

Sound

Enable/disable the keypad tone and operation sound.

1. In the Setting menu, touch the sound icon.

2. Touch the slider to select on or off.

3. Touch to exit.

TV

PAL (50Hz): UK, Europe, Australia etc. Wrong TV sys-

tem setting may cause images to ﬂicker.

1. In the Setting menu, touch the TV icon.

2. Touch to select PAL or NTSC.

3. Touch to exit.

Anti-Glare

Turn on this function to improve the LCD visibility in

bright or reﬂective outdoor conditions.

1. In the Setting menu, touch on the screen.

2. Touch to select the desired option.

3. Touch the OK icon to validate the setting.

4. Touch to exit.

Language

Set the language of the user interface.

1. In the Setting menu, touch the Language icon.

2. Touch to select the desired option.

3. Touch the OK icon to validate the setting.

4. Touch to exit.

Time Setting

1. In the Setting menu, touch the Time Setting icon.

2. Touch Year, Month, Day, Hour, Minute, and AM/

PM to set.

3. Adjust the numeric value by touching / .

4. Touch OK to validate the setting.

5. Touch to exit.

Format

1. In the Setting menu, touch the Format icon.

2. Touch (yes or no) to select.

3. Touch Yes to format and No to cancel.

Default Setting

1. In the Setting menu, touch the Default setting icon.

2. Touch (yes or no) to select.

3. Touch Yes to execute and No to cancel.

Chapter 6: Settings

14

Connecting to a High-Deﬁnition TV

1. Connect the HDMI cable to the camera’s HDMI Out

connection.

2. Connect the other end of the cable to a TV.

3. Set the video input source of your TV to “HDMI.”

4. The steps for viewing stored videos and photos on

HDTV are exactly the same as for viewing them on the

LCD monitor.

Connecting to a TV without HDMI

1. Connect one end of the AV cable to your camera’s

AV out port.

2. Connect the other end of the cable to a TV.

3. The steps for viewing stored videos and photos on

TV are exactly the same as for viewing them on the

LCD monitor.

Chapter 7: Connections

(16:9)

( 4 : 3 )

English Svenska Norsk

15

Chapter 8: Trouble shooting

The LCD shows the “!” symbol

- The “!” means that the SD card is of low speed or is

having wrong content. The way to solve this is to for-

mat the SD card in the camera instead of a PC.

- Or change the SD card to a high speed one.

Indoor photos look blurry and dark

- The camera extends the photo exposure time under

low light/indoor condition. Keep the camera (and the

target subject) steady for several seconds when tak-

ing photos. The shutter will sound when photos are

being taken.

Battery charging

- You must use the supplied AC charger or the USB

cable. The camera must be turned OFF. The blinking

light conﬁrms the camera is currently charging, and

the light becomes constant after the charging is com-

pleted.

- In AC charging Mode, the light will turn itself off au-

tomatically after 3~5 minutes . The full charge time is

about 4 to 5 hours.)

Installing Bundled Software

The CD-ROM supplied with this camera contains 2

pieces of software.

- ArcSoft MediaImpression helps you manage media,

burning video into DVD, and uploading to web sites.

- Adobe Reader you need to read the User’s Manual.

Click on [Extras] on the title bar and select [Help] to

open the instruction manual.

To install the bundled software:

1. Insert the CD-ROM into your computer’s CD-ROM

drive. The auto run screen appears.

2. Click “Install ArcSoft MediaImpression”. Follow the

on-screen instructions to complete the installation.

Transferring Photos or Videos to a Computer

You can transfer photos or videos stored on your

camera to a computer.

1. Connect the computer and camera with the mini

USB 2.0 cable.

2. The videos and photos can be found on your

computer at “My Computer\Removable Disk/DCIM

/100MEDIA”. (when a SD card is in the camera)

3. Under this folder, you can view, delete, move, or

copy any video/photo you want.

16

Chapter 9: Speciﬁcations

Image sensor 5 Mega pixel CMOS sensor

Operation modes Video recording, Photography

Lens Auto Focus Lens (F3.1)

Focus range Macro Mode: 1cm~120cm

Normal Mode: 1 cm~inﬁnite

Zoom 1X~1440X (12X Optical zoom and

120X Digital zoom)

Shutter Electronic

LCD monitor 3” touch LCD (16:9)

Storage media Built-in 128MB memory (partial

memory is used for ﬁrmware code

and software); SD/SDHC/SDXC

card slot support (up to 64GB)

Image resolution High 4608 x 3456 (16M pixels)

Standard 2592x1944 (5M pixels)

Low 2048x1536 (3M pixels)

Video resolution FHD (1080p 30) 1920X1080(30fps)

HD+ (720p 60) 1280X720(60fps)

HD (720p 30) 1280X720(30fps)

VGA (640X480) 640X480(30fps)

White balance Auto/Manual

(Daylight, Fluorescent, Tungsten)

ISO Auto/800/1600/3200/6400

Self-timer 10 seconds delay

Light Light On, Digital Light, Light Off,

File format Photo: JPG

Video: AVI

Image play Single image/Slide show

PC interface Mini USB 2.0 port

TV out HDMI

Battery Lithium-ion rechargeable battery

Dimension 121mm (L) x 59mm (H) x 54mm (W)

Weight 250g ( without battery)

System

requirements

Microsoft Windows XP/Vista/7

Intel /AMD Dual-Core CPU or above

1 GB RAM

2 GB free HDD space

USB port

English Svenska Norsk

17

Statement

This manual does not provide any warranty or related

declarations. All information in this manual including the

product speciﬁcation, pictures and literatures is just for

reference, CI no 556520-4137 reserves the rights to up-

date contents of this manual without further notice.

Copyright

This manual is the copyright of CI no 556520-4137. No

part of this manual may be revised, copied or transmit-

ted in any way without written permission from CI no

556520 -4137.

18

Varning

Tappa eller skruva aldrig isär kameran.

Använd kameran varsamt. Om du är oaktsam kan inre

komponenter skadas.

Utsätt inte kameran för höga temperaturer. Undvik

kontakt med vatten.

Kamerahuset kan bli varmt vid långvarig användning.

Testa kameran och dess inställningar före användn-

ing.

Använd bara den typ av batterier som följde med vid

köpet.

Ta ut batteriet om kameran inte ska användas en

längre period.

Tele zoom

Vidvinkel zoom

Digitalt ljus

Tillbaka

Föregående

Spola tillbaka

Sänk volymen

Spola framåt

Spela upp/Stopp

Nästa

Höj volymen

Radera

Foto

Pausa

Video

FJÄRRKONTROLL

English Svenska Norsk

19

Kapitel 1: Produktkomponenter

Lins

Videoknapp

Lampa för timer

Mikrofon

Fäste för

extern

lins/ﬁlter

Pausknapp

Högtalare

Fäste för stativ

Batterilucka/SD-kort

Stabilisator

Fotografera

Tele/Vidvinkel zoom

Strömknapp

HDMI-utgång

Lampa för inspelning

Mini

USB-utgång

LCD Touch skärm

FRAMIFRÅN FRÅN SIDAN

BOTTEN

20

Kapitel 2: Komma igång

Sätta i batteriet

Innan du använder kameran måste du sätta i det

uppladdningsbara batteriet. Sätt i batteriet enligt

polaritetsmärkningen ( + och -). Stäng batteriluckan

ordentligt.

Ladda batteriet

När kameran är avstängd använd strömadaptern eller

USB-kabeln. Den totala laddningstiden är cirka 4-5

timmar.

Det blinkande ljuset bekräftar att kameran laddas, och

när det lyser stadigt är laddningen klar. När adaptern

används stängs ljuset av automatiskt efter 3-5 minu-

ter.

Sätta i och ta ur SD-kortet

Kameran har ett inbyggt minne där du kan spara

foton och video. Du kan utöka minneskapaciteten

genom att använda ett SD-kort.

Sätt i minneskortet i sin öppning (se kap. 1). För att ta

ut ett minneskort tryck det innåt och dra sedan utåt.

Starta kameran

Öppna LCD-panelen eller tryck på strömknappen.

Ställa in datum och tid

Tidinställningsmenyn låter dig ställa in datum och tid:

1. Tryck på Year, Month, Day, Hour, Minute, och AM/

PM på skärmen för att ställa in datum och tid.

2. Justera de numeriska värdena genom att trycka

/ .

3. Tryck på OK för att bekräfta inställningarna.

4. Tryck för att avsluta.

Snabbguide

Spela in video: Tryck på videoknappen för att spela

in och stoppa inspelning.

Pausa inspelning: Tryck på Pauseknappen.

Ta ett foto medan du ﬁlmar: Tryck på fotoknappen

för att ta ett foto. visas på LCD-skärmen.

Fotografera: Tryck på fotoknappen halvvägs tills fo-

kuseringsramen byter färg från vit till grön (se bilden

nedan). Tryck sedan ner knappen helt för att ta ett

foto.

Sidan laddas ...

Andersson CAM 1.5 Användarmanual

Andersson CAM 1.5 Användarmanual

på andra språk

Relaterade papper

Andra dokument