ENGLISH
UNITED KINGDOM
www.clasohlson.co.uk
Ver. 20211015
Sputnik Ceiling Light Art.no 36-7967 Model OCL-0839P MBR2
36-7348 OCL-0839P MBK1
Please read theentire instruction manual before
use and then save it for future reference. We
reserve theright for any errors in text or images and
any necessary changes made to technicaldata.
Intheevent of technical problems or other queries,
please contact our Customer Services.
Safety
Warning:
• All light fittings must be installed in accordance
with current safety regulations to prevent life-
threatening accidents.
• Theinstallation of this light fitting must only be
performed by someone with thenecessary
knowledge of electrical wiring.
• In certain countries light fittings must only be
installed by aqualified electrician. Contact your
local authorities if you are unsure.
Installation
Information
Theprocedures for installing light fittings on ceilings
can vary from country to country.
4. Push in or pull out theelectric cable from
theceiling cup to adjust thedistance from
thelight to theceiling. Fasten thecable to
theceilingcup.
Risk of electricshock: Always
disconnect thepower before beginning
any installation.
This product is intended for indoor
useonly.
Product description
• Chandelier light fitting designed for hanging from
theceiling.
• Supply voltage: 230V.
• Lamp base: E27
• Bulbs: 8×E27, max 30W (sold separately)
• Adjustablearms.
• Adjustable height from theceiling.
Preparations
Make sure that you have aceiling hook to attach
thelight fittingto.
• If your ceiling has alamp socket with aceiling
hook, thelight fitting can be hung onthat.
• If your ceiling has no pre-installed hook you
should fit ahook capable of supporting
theweight of thelight fitting to theceiling using
anappropriate method of fasteningit. Ensure
1. Turn off thepower before
beginning theinstallation.
2. Twist the ceiling cup’s strain relief screw and
slide thecup down along thecable to allow
easy access to theterminalblock.
3. Connect thelight fitting to themains according
to one of thebelow alternatives:
Lamp lead
with plug (sold
separately)
which plugs
into aceiling-
mounted lamp
socket.
Power supply
cable protruding
from theceiling.
5. Hang up thelight on
theceilinghook.
6. Push up theceiling cup until it reaches
theceiling, fasten it into thecorrect position by
turning thestrain relief screw.
7. Screw thelight bulbs (sold separately) into
thelight sockets on thelamp holders.
8. Turn thepoweron.
Care and maintenance
• Always unplug thelight and let thebulb cool
before cleaning thelight or changing thebulb.
• Thelight fitting should be cleaned using adry
cloth or vacuum cleaner.
Responsible disposal
Instructions foruse
Thearms of
thechandelier are
fastened two-and-two on
rings which can be turned
individually to direct
thelight of thechandelier
as youwish.
This symbol indicates that this
product should not be disposed
of with general householdwaste.
Thisapplies throughout theentire
EU. Inorder to prevent any harm to
theenvironment or health hazards
caused by incorrect waste disposal,
theproduct must be handed in for
recycling so that thematerial can
be disposed of in aresponsible
manner. Whenrecycling theproduct,
take it to your local collection facility
or contact theplace of purchase.
Theywill ensure that theproduct is
disposed of in anenvironmentally
sound manner.
Specifications
Rated voltage 220–240 V AC, 50 Hz
Lamp base E27
Bulb type 8×E27, max 30W
(sold separately)
Max distance to
theceiling Approx. 1.2m
Size Approx. 40cm in diameter
that there are no electrical wires or water pipes
in theceiling where you intend to drill/screw.