AEG A92970GNM0 Användarmanual

varumärke: AEG

Modell: A92970GNM0

Kategori: Kyl-frysar

Typ: Användarmanual

A92970GNM0 EN User manual 2

SV Bruksanvisning 21

CONTENTS

1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6. WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

7. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

8. NOISES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

9. TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading to get

the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

SAFETY INSTRUCTIONS

In the interest of your safety and to en-

sure the correct use, before installing

and first using the appliance, read this

user manual carefully, including its hints

and warnings. To avoid unnecessary mis-

takes and accidents, it is important to

ensure that all people using the appli-

ance are thoroughly familiar with its op-

eration and safety features. Save these

instructions and make sure that they re-

main with the appliance if it is moved or

sold, so that everyone using it through

its life will be properly informed on ap-

pliance use and safety.

For the safety of life and property keep

the precautions of these user's instruc-

tions as the manufacturer is not respon-

sible for damages caused by omission.

1.1 Children and vulnerable

people safety

• This appliance is not intended for use

by persons (including children) with re-

duced physical, sensory or mental ca-

pabilities, or lack of experience and

knowledge, unless they have been giv-

en supervision or instruction concern-

ing use of the appliance by a person

responsible for their safety.

Children should be supervised to en-

sure that they do not play with the ap-

pliance.

• Keep all packaging well away from

children. There is risk of suffocation.

• If you are discarding the appliance

pull the plug out of the socket, cut the

connection cable (as close to the ap-

pliance as you can) and remove the

door to prevent playing children to

suffer electric shock or to close them-

selves into it.

• If this appliance featuring magnetic

door seals is to replace an older appli-

ance having a spring lock (latch) on

the door or lid, be sure to make that

spring lock unusable before you dis-

card the old appliance. This will pre-

vent it from becoming a death trap for

a child.

1.2 General safety

WARNING!

Keep ventilation openings, in the appli-

ance enclosure or in the built-in struc-

ture, clear of obstruction.

• The appliance is intended for keeping

foodstuff and/or beverages in a nor-

mal household and similar applica-

tions such as:

– staff kitchen areas in shops, offices

and other working environments;

– farm houses and by clients in hotels,

motels and other residential type

environments;

– bed and breakfast type environ-

ments;

– catering and similar non-retail appli-

cations.

• Do not use a mechanical device or any

artificial means to speed up the thaw-

ing process.

• Do not use other electrical appliances

(such as ice cream makers) inside of

refrigerating appliances, unless they

are approved for this purpose by the

manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is

contained within the refrigerant circuit

of the appliance, a natural gas with a

high level of environmental compati-

bility, which is nevertheless flammable.

During transportation and installation

of the appliance, be certain that none

of the components of the refrigerant

circuit become damaged.

If the refrigerant circuit should be-

come damaged:

– avoid open flames and sources of

ignition

– thoroughly ventilate the room in

which the appliance is situated

• It is dangerous to alter the specifica-

tions or modify this product in any

way. Any damage to the cord may

cause a short-circuit, fire and/or elec-

tric shock.

ENGLISH 3

WARNING!

Any electrical component (power

cord, plug, compressor) must be

replaced by a certified service

agent or qualified service per-

sonnel to avoid hazard.

Power cord must not be length-

ened.

Make sure that the power plug is

not squashed or damaged by the

back of the appliance. A squashed

or damaged power plug may

overheat and cause a fire.

Make sure that you can come to

the mains plug of the appliance.

Do not pull the mains cable.

If the power plug socket is loose,

do not insert the power plug.

There is a risk of electric shock or

fire.

You must not operate the appli-

ance without the lamp cover (if

foreseen) of interior lighting.

• This appliance is heavy. Care should

be taken when moving it.

• Do not remove nor touch items from

the freezer compartment if your hands

are damp/wet, as this could cause skin

abrasions or frost/freezer burns.

• Avoid prolonged exposure of the ap-

pliance to direct sunlight.

• Bulb lamps (if foreseen) used in this

appliance are special purpose lamps

selected for household appliances use

only. They are not suitable for house-

hold room illumination.

1.3 Daily Use

• Do not put hot pot on the plastic parts

in the appliance.

• Do not store flammable gas and liquid

in the appliance, because they may

explode.

• Do not place food products directly

against the air outlet on the rear wall.

(If the appliance is Frost Free)

• Frozen food must not be re-frozen

once it has been thawed out.

• Store pre-packed frozen food in ac-

cordance with the frozen food manu-

facturer's instructions.

• Appliance's manufacturers storage

recommendations should be strictly

adhered to. Refer to relevant instruc-

tions.

• Do not place carbonated or fizzy

drinks in the freezer compartment as it

creates pressure on the container,

which may cause it to explode, result-

ing in damage to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

1.4 Care and cleaning

• Before maintenance, switch off the ap-

pliance and disconnect the mains plug

from the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove

frost from the appliance. Use a plastic

scraper.

• Never use a hair drier or other heating

appliances to speed up defrosting. Ex-

cessive heat may damage the plastic

interior, and humidity could enter the

electric system making it live.

1.5 Installation

For electrical connection careful-

ly follow the instructions given in

specific paragraphs.

• Unpack the appliance and check if

there are damages on it. Do not con-

nect the appliance if it is damaged.

Report possible damages immediately

to the place you bought it. In that case

retain packing.

• It is advisable to wait at least four

hours before connecting the appli-

ance to allow the oil to flow back in

the compressor.

• Adequate air circulation should be

around the appliance, lacking this

leads to overheating. To achieve suffi-

cient ventilation follow the instructions

relevant to installation.

• Wherever possible the back of the

product should be against a wall to

avoid touching or catching warm parts

(compressor, condenser) to prevent

possible burn.

www.aeg.com

• The appliance must not be located

close to radiators or cookers.

• Make sure that the mains plug is ac-

cessible after the installation of the ap-

pliance.

• Connect to potable water supply only

(If a water connection is foreseen).

1.6 Service

• Any electrical work required to do the

servicing of the appliance should be

carried out by a qualified electrician or

competent person.

• This product must be serviced by an

authorized Service Centre, and only

genuine spare parts must be used.

1.7 Environment Protection

This appliance does not contain

gasses which could damage the

ozone layer, in either its refriger-

ant circuit or insulation materials.

The appliance shall not be dis-

carded together with the urban

refuse and rubbish. The insula-

tion foam contains flammable

gases: the appliance shall be dis-

posed according to the applica-

ble regulations to obtain from

your local authorities. Avoid

damaging the cooling unit, espe-

cially at the rear near the heat ex-

changer. The materials used on

this appliance marked by the

symbol

are recyclable.

2. CONTROL PANEL

56 4 3 2

Display

Temperature warmer button

Temperature colder button

OK button

Mode button

ON/OFF button

It is possible to change predefined

sound of buttons to a loudly one by

pressing together Mode button and

Temperature colder button for some

seconds. Change is reversible.

2.1 Display/Indicator

Off

A CB D

G F E

Timer indicator

Ice maker function

FROSTMATIC function

Temperature indicator

Alarm indicator

Child Lock function

Minute Minder function

ENGLISH 5

2.2 Switching on

To switch on the appliance do these

steps:

Connect the mains plug to the pow-

er socket.

Press the ON/OFF button if the dis-

play is off.

The alarm buzzer could operate af-

ter few seconds.

To reset the alarm refer to “High

temperature alarm”.

If "dEMo" appears on the display,

the appliance is in demonstration

mode. Refer to "What to do if..."

paragraph.

The temperature indicators show the

set default temperature.

To select a different set temperature re-

fer to "Temperature regulation".

If the door remains open for

some minutes, the light will turn

off automatically. The light is re-

set by closing and opening the

door itself.

2.3 Switching off

To switch off the appliance do these

steps:

Press the ON/OFF button for few

seconds.

The display switches off.

To disconnect the appliance from

the power disconnect the mains

plug from the power socket.

2.4 Temperature regulation

The set temperature of the freezer may

be adjusted by pressing the temperature

button.

Set default temperature:

• -18°C for the freezer

The temperature indicator shows the set

temperature.

The set temperature will be reached

within 24 hours.

After a power failure the set tem-

perature remains stored.

2.5 Ice maker function

The ice maker is switched on at delivery

and starts up automatically when the ap-

pliance is connected to water and power

supplies.

To switch on and off the function:

Press the Mode button until the cor-

responding icon appears.

The Ice maker indicator flashes for

few seconds.

Press the OK button to confirm.

The OFF icon is shown when the ice

maker is deactivated.

2.6 FROSTMATIC function

To switch on the function:

Press the Mode button until the cor-

responding icon appears.

The FROSTMATIC indicator flashes.

Press the OK button to confirm.

The FROSTMATIC indicator is

shown.

This function stops automatically after 52

hours.

To switch off the function before its au-

tomatic end:

Press the Mode button until the

FROSTMATIC indicator flashes.

Press the OK button to confirm.

The FROSTMATIC indicator goes

off.

The function switches off by se-

lecting a different freezer set

temperature.

2.7 Minute Minder function

The Minute Minder function is to be

used to set an acoustic alarm at the pre-

ferred time, useful for example when a

recipe requires to cool down a mixture

for a certain length of time, or when a re-

minder is needed in order not to forget

the bottles placed in the freezer for fast

cooling.

To switch on the function:

Press the Mode button until the cor-

responding icon appears.

The Minute Minder indicator flashes.

The Timer shows the set value (30

minutes) for a few seconds.

www.aeg.com

Press the Temperature colder but-

ton or the Temperature warmer but-

ton to change the Timer set value

from 1 to 90 minutes.

Press the OK button to confirm.

The Minute Minder indicator is

shown.

The Timer start to flash (min).

At the end of the countdown the Minute

Minder indicator flashes and an audible

alarm sounds:

Remove any drinks contained in the

freezer compartment.

Press OK button to switch off the

sound and terminate the function.

It is possible to deactivate the function

at any time during the countdown:

Press the Mode button until the Mi-

nute Minder indicator flashes.

Press the OK button to confirm.

The Minute Minder indicator goes

off.

It is possible to change the time during

the countdown and at the end by press-

ing the Temperature colder button and

the Temperature warmer button.

2.8 Child Lock function

To lock the buttons from unintentional

operation select the Child Lock function.

To switch on the function:

Press the Mode button until the cor-

responding icon appears.

The Child Lock indicator flashes.

Press the OK button to confirm.

The Child Lock indicator is shown.

To switch off the function:

Press the Mode button until the

Child Lock indicator flashes.

Press the OK button to confirm.

The Child Lock indicator goes off.

2.9 High temperature alarm

Temperature increase in the freezer

compartment (for example due to an

earlier power failure or door is open) is

indicated by:

• flashing the alarm and freezer temper-

ature indicators

• sounding of buzzer.

To reset the alarm:

Press any button.

The buzzer switches off.

The freezer temperature indicator

shows the highest temperature

reached for a few seconds. Then

show again the set temperature.

The alarm indicator continue to flash

until the normal conditions are re-

stored.

2.10 Door open alarm

An acoustic alarm will sound if the door

is left open for a few minutes. The door

open alarm conditions are indicated by:

• flashing alarm indicator

• acoustic buzzer.

When normal conditions are restored

(door closed), the alarm will stop.

During the alarm phase, the buzzer can

be switched off by pressing any button.

3. DAILY USE

3.1 Freezing fresh food

The freezer compartment is suitable for

freezing fresh food and storing frozen

and deep-frozen food for a long time.

To freeze small amount of fresh foods it

is not necessary to change the present

setting.

To freeze fresh food activate the FROST-

MATIC function at least 24 hours before

placing the food to be frozen in the

freezer compartment.

It is possible to place the fresh food to

be frozen in all compartments except

the lowest.

The maximum amount of food that can

be frozen in 24 hours is specified on the

rating plate, a label located on the in-

side of the appliance.

The freezing process lasts 24 hours: dur-

ing this period do not add other food to

be frozen.

ENGLISH 7

3.2 Storage of frozen food

When first starting-up or after a period

out of use, before putting the products

in the compartment let the appliance run

at least 2 hours.

The freezer baskets ensure that it is

quick and easy to find the food package

you want. If large quantities of food are

to be stored, remove all drawers except

for the bottom basket which secures

good air circulation. The two plastic

frames supporting the large drawers also

need to be removed. To optimise stor-

age area, move glass shelf from the

fourth position to the one just above the

bottom basket. On all shelves except for

the top shelf it is possible to place food

that protrude 15 mm from the door.

In the event of accidental de-

frosting, for example due to a

power failure, if the power has

been off for longer that the value

shown in the technical character-

istics chart under "rising time",

the defrosted food must be con-

sumed quickly or cooked imme-

diately and then re-frozen (after

cooling).

3.3 Thawing

Deep-frozen or frozen food, prior to be-

ing used, can be thawed in the refrigera-

tor compartment or at room tempera-

ture, depending on the time available

for this operation.

Small pieces may even be cooked still

frozen, directly from the freezer: in this

case, cooking will take longer.

3.4 Shelf above ice maker

The shelf above the ice maker

cannot be removed.

www.aeg.com

3.5 Dispensing of ice

The dispensing of ice start when you

turn the knob counter clockwise.

Stop delivery by turning the knob back

to the starting position.

ENGLISH 9

3.6 Removal of freezing baskets and glass shelves from the

freezer

Some of the freezing baskets have a limit

stop to prevent their accidental removal

or falling out. At the time of its removal

from the freezer, pull the basket towards

yourself and, upon reaching the end

point, remove the basket by tilting its

front upwards

At the time of putting it back, slightly lift

the front of the basket to insert it into

the freezer.

Once you are over the end points, push

the basket back in their position.

The appliance is equipped with shelf

stops to secure the shelves.

The shelves must be lifted up (1) on each

side and than pulled outwards (2).

Some freezing baskets are equipped

with expander rollers placed within a

plastic frame. To remove the plastic

frame from the appliance press the shelf

stops placed under the frame and pull

the frame gently out of the cabinet.

www.aeg.com

3.7 Cleaning the interior

Before using the appliance for the first

time, wash the interior and all internal

accessories with lukewarm water and

some neutral soap so as to remove the

typical smell of a brand-new product,

then dry thoroughly.

Do not use detergents or abra-

sive powders, as these will dam-

age the finish.

Check that the drain hose at the rear of

the cabinet discharges into the drip tray

4. HELPFUL HINTS AND TIPS

4.1 Hints for freezing

To help you make the most of the freez-

ing process, here are some important

hints:

• the maximum quantity of food which

can be frozen in 24 hrs. is shown on

the rating plate;

• the freezing process takes 24 hours.

No further food to be frozen should

be added during this period;

• only freeze top quality, fresh and thor-

oughly cleaned, foodstuffs;

• prepare food in small portions to ena-

ble it to be rapidly and completely fro-

zen and to make it possible subse-

quently to thaw only the quantity re-

quired;

• wrap up the food in aluminium foil or

polythene and make sure that the

packages are airtight;

• do not allow fresh, unfrozen food to

touch food which is already frozen,

thus avoiding a rise in temperature of

the latter;

• lean foods store better and longer

than fatty ones; salt reduces the stor-

age life of food;

• water ices, if consumed immediately

after removal from the freezer com-

partment, can possibly cause the skin

to be freeze burnt;

• it is advisable to show the freezing in

date on each individual pack to enable

you to keep tab of the storage time.

4.2 Hints for storage of frozen

food

To obtain the best performance from

this appliance, you should:

• make sure that the commercially fro-

zen foodstuffs were adequately stored

by the retailer;

• be sure that frozen foodstuffs are

transferred from the foodstore to the

freezer in the shortest possible time;

• not open the door frequently or leave

it open longer than absolutely neces-

sary;

• once defrosted, food deteriorates rap-

idly and cannot be refrozen;

• do not exceed the storage period in-

dicated by the food manufacturer.

ENGLISH 11

5. CARE AND CLEANING

CAUTION!

Unplug the appliance before car-

rying out any maintenance oper-

ation.

This appliance contains hydrocar-

bons in its cooling unit; mainte-

nance and recharging must

therefore only be carried out by

authorized technicians.

5.1 Periodic cleaning

The equipment has to be cleaned regu-

larly:

• clean the inside and accessories with

lukewarm water and some neutral

soap.

• regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

• rinse and dry thoroughly.

Do not pull, move or damage

any pipes and/or cables inside

the cabinet.

Never use detergents, abrasive

powders, highly perfumed clean-

ing products or wax polishes to

clean the interior as this will dam-

age the surface and leave a

strong odor.

Clean the condenser (black grill) and the

compressor at the back of the appliance

with a brush. This operation will improve

the performance of the appliance and

save energy consumption.

Take care of not to damage the

cooling system.

When moving the cabinet, lift it

by the front edge to avoid

scratching the floor.

Many proprietary kitchen surface clean-

ers contain chemicals that can attack/

damage the plastics used in this appli-

ance. For this reason use a soft cloth

rinsed in warm water and neutral soap

emulsion for cleaning external surfaces.

Do not use detergents or abra-

sive paste as these will damage

the paint, or stainless steel anti

finger print coating.

After cleaning, reconnect the equipment

to the mains supply.

5.2 Cleaning the ice maker

When necessary, clean the ice container

and use only a soft cloth and warm wa-

ter.

Ensure that the ice container is thor-

oughly dry before being refitted.

Do not use detergents or abra-

sive paste.

5.3 Defrosting of the freezer

The freezer compartment of this model,

on the other hand, is a "no frost" type.

This means that there is no buildup of

frost when it is in operation, neither on

the internal walls nor on the foods.

The absence of frost is due to the con-

tinuous circulation of cold air inside the

compartment, driven by an automatically

controlled fan.

5.4 Periods of non-operation

When the appliance is not in use for

long periods, take the following precau-

tions:

Switch off the ice maker

Turn off the water connection

Empty the ice container

Disconnect the appliance from elec-

tricity supply

Remove all food

Clean the appliance and all accesso-

ries

Leave the door/doors open to pre-

vent unpleasant smells.

When the ice maker starts again, do not

use ice produced during the first day to

ensure fresh taste.

www.aeg.com

If the cabinet will be kept on, ask

somebody to check it once in a

while to prevent the food inside

from spoiling in case of a power

failure.

5.5 Cleaning the ventilation grille

The ventilation grille can be removed for

washing.

Make sure the door is open and then:

• Loosen the lower edge of the grille by

pulling outward/upward.

• Pull the grille straight out to complete-

ly remove it.

• Vacuum clean under the cabinet.

6. WHAT TO DO IF…

During operation of the appliance some

smaller but annoying trouble can often

occur, which does not require calling a

technician out. In the following chart in-

formation is given about them to avoid

unnecessary charges on service.

The operation of the appliance

goes with certain sounds (com-

pressor and circulating sound).

This not means a trouble, but a

normal operation.

The appliance operates discon-

tinuously, so the stopping of

compressor does not mean be-

ing no current. That is why you

must not touch the electrical

parts of the appliance before

breaking the circuit.

Problem Possible cause Solution

The appliance is

noisy.

The appliance is not sup-

ported properly.

Check if the appliance

stands stable (all feet and

wheels should be on the

floor). Refer to "Levelling".

The buzzer sounds.

The Alarm icon flash-

ing.

The temperature in the

freezer is too high.

Refer to "HighTempera-

ture Alarm".

The door is not closed

correctly.

Refer to "Door open

alarm".

upper or lower

square is shown in

the temperature dis-

play.

An error has occurred in

measuring the tempera-

ture.

Call your service represen-

tative (the cooling system

will continue to keep food

products cold, but temper-

ature adjustment will not

be possible).

ENGLISH 13

Problem Possible cause Solution

“dEMo” appears on

the display.

The appliance is in dem-

onstration mode.

Keep pressed approxi-

mately 10 sec the OK but-

ton since a long sound of

buzzer is heard and the

display shut off for a short

while: appliance start

works regularly.

The compressor runs

continuously.

The Temperature regula-

tor may be set incorrectly.

Set a warmer temperature.

The door is not closed

correctly.

Refer to "Closing the

door".

The door has been

opened too frequently.

Do not keep the door

open longer than necessa-

ry.

The food temperature is

too high.

Let the food temperature

decrease to room temper-

ature before storage.

The room temperature is

too high.

Decrease the room tem-

perature.

There is too much

frost and ice.

The door is not closed

correctly.

Refer to "Closing the

door".

The door gasket is de-

formed or dirty.

Refer to "Closing the

door".

The temperature in

the appliance is too

cold.

The Temperature regula-

tor may be set incorrectly.

Set a warmer temperature.

The temperature in

the appliance is too

warm.

The Temperature regula-

tor may be set incorrectly.

Set a colder temperature.

The door is not closed

correctly.

Refer to "Closing the

door".

The food temperature is

too high.

Let the food temperature

decrease to room temper-

ature before storage.

The temperature in

the freezer is too

warm.

Food is too near to each

other.

Store food so that there is

cold air circulation.

Large quantities of food

to be frozen were put in

at the same time.

Insert smaller quantities of

food to be frozen at the

same time.

The appliance does

not operate.

The appliance is switched

off.

Switch on the appliance.

The mains plug is not

connected to the mains

socket correctly.

Connect the mains plug to

the mains socket correctly.

www.aeg.com

Problem Possible cause Solution

The appliance has no

power. There is no volt-

age in the mains socket.

Connect another electrical

appliance to the mains

socket. Check fuse. Con-

tact a qualified electrician.

No ice The ice maker is not

switched on.

Refer to “Switching on and

off the ice maker”.

No water supply. Carry out the necessary

measures on the water

supply.

The lamp does not

work.

The lamp is defective. Refer to "Replacing the

lamp".

The door has been open

to long.

Close the door.

Door interferes with

ventilation grill.

The appliance is not lev-

elled.

Refer to "Levelling".

Misaligned door. The appliance is not lev-

elled.

Refer to "Levelling".

As much as the advice does not lead to result, call the nearest brand-mark service.

6.1 Replacing the lamp

The appliance is equipped with a long-

life LED light.

Only service is allowed to replace the

lighting device. Contact your Service

Center.

6.2 Closing the door

Clean the door gaskets.

If necessary, adjust the door. Refer

to "Installation".

If necessary, replace the defective

door gaskets. Contact the Service

Center.

7. INSTALLATION

WARNING!

Read the "Safety Information"

carefully for your safety and cor-

rect operation of the appliance

before installing the appliance.

7.1 Positioning

Install this appliance at a location where

the ambient temperature corresponds to

the climate class indicated on the rating

plate of the appliance:

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

ENGLISH 15

7.2 Location

50 mm

To ensure best performance, if the appli-

ance is positioned below an overhang-

ing wall unit, the minimum distance be-

tween the top of the cabinet and the

wall unit must be at least 40 mm. Ideally,

however, the appliance should not be

positioned below overhanging wall units.

The ventilation space can be:

• directly above the appliance

• behind and above the top cupboard.

In this case, the space behind the top

cupboard must be at least 50 mm

deep.

7.3 Electrical connection

Before plugging in, ensure that the volt-

age and frequency shown on the rating

plate correspond to your domestic pow-

er supply.

The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the do-

mestic power supply socket is not earth-

ed, connect the appliance to a separate

earth in compliance with current regula-

tions, consulting a qualified electrician.

The manufacturer declines all responsi-

bility if the above safety precautions are

not observed.

This appliance complies with the E.E.C.

Directives.

7.4 Removing the transport support

Your appliance is equipped with trans-

port support to secure the door during

transportation.

To remove them do these steps:

• Open the door.

• Remove the transport support from

the door sides.

Some models are fitted with a si-

lencing pad under the cabinet.

Do not remove this pad.

www.aeg.com

7.5 Rear spacers

• Install the spacers provided within the

accessory bag as shown in the figure.

• Install the spacers on the brackets of

the condenser (black grill) at the back

of the appliance.

7.6 Connecting the water

hose.

Water supply should be provided with a

tap and 3/4" male connector within 1,5

m from the appliance.

This work is to be carried out by a skilled

plumber.

There are different type-approved taps

and tap assemblies on the market.

The water hose must not be cracked,

squeezed or put in tight bends.

The safety valve provided in a package

inside the appliance should be used to

prevent overflow.

Before the safety valve is placed on the

tap, turn the pointer clockwise to num-

ber 10 with the enclosed plastic key.

Install the safety valve on the tap and let

at least 10 litres of water flow through

the device.

Before connecting the appliance turn

the pointer to number 1 on the safety

valve.

If the safety valve has shut off, detach it

and press the red plunger which is loca-

ted inside the lower housing of the de-

vice itself.

Before the appliance is placed in final lo-

cation, ensure that the water connection

has been correctly carried out and that

there is no leakage at the connection to

the water tap.

Tighten the screw enough by hand.

Make sure that the gasket is properly

positioned in the connector.

We recommend that the appliance is

placed on a "run-off" mat intended for

refrigerators and freezers, which makes it

easier to detect possible leakage.

7.7 Levelling

When placing the appliance ensure that

it stands level. If necessary adjust the

feet using the adjustment spanner sup-

plied.

ENGLISH 17

7.8 Starting the ice maker for

the first time.

Ensure proper connection to the water

supply, refer to "Connecting the water

hose".

Open the tap on the water connec-

tion.

Start the freezer and the ice maker

starts automatically.

It will start filling water when the temper-

ature is sufficiently low.

Do not use ice produced during the first

day to ensure fresh taste.

7.9 Door reversibility

The door reversibility is not possible.

8. NOISES

There are some sounds during normal

running (compressor, refrigerant circula-

tion).

BRRR!

HISSS!

CLICK!

BLUBB!

CRACK!

SSSRR

CLICK!

SSSRRR!

www.aeg.com

BRRR!

HISSS!

BLUBB!

CRACK!CRACK!

9. TECHNICAL DATA

Dimension

Height 1850 mm

Width 595 mm

Depth 623 mm

Rising Time 10 h

Voltage 230 V

Frequency 50 Hz

The technical information are situated in

the rating plate on the internal left side

of the appliance and in the energy label.

ENGLISH 19

Water pressure range

The water pressure must be at least 1 bar

(100kPa)

Consult your installer if water

pressure is less than 1 bar.

Highest allowed water pressure 10 bar

(1000kPa)

If water pressure exceeds 10 bar

a reduction valve must be fitted

(available from your specialist

shop).

• Do not connect the appliance

in spaces where ambient tem-

perature can decrease to be-

low freezing.

• The appliance may only be

connected to drinking water

supplies.

• The appliance may only be

connected to cold water sup-

plies.

10. ENVIRONMENT CONCERNS

Recycle the materials with the

symbol

. Put the packaging in

applicable containers to recycle it.

Help protect the environment and

human health and to recycle waste

of electrical and electronic

appliances. Do not dispose

appliances marked with the symbol

with the household waste. Return the

product to your local recycling

facility or contact your municipal

office.

www.aeg.com

Sidan laddas ...

AEG A92970GNM0 Användarmanual

varumärke: AEG

Modell: A92970GNM0

Kategori: Kyl-frysar

Typ: Användarmanual

Ladda ner pdf

Rapportera

på andra språk

English: AEG A92970GNM0 User manual

AEG A92970GNM0 Användarmanual

AEG A92970GNM0 Användarmanual

på andra språk

Relaterade papper

Andra dokument