Aeg-Electrolux SCD71800S0 Användarmanual

SCD71800S0 EN User manual 2

FI Käyttöohje 24

SV Bruksanvisning 46

CONTENTS

1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6. WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

7. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

8. NOISES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

9. TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

10. ENVIRONMENT CONCERNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading to get

the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

2

www.aeg.com

1.

SAFETY INFORMATION

In the interest of your safety and to en-

sure the correct use, before installing

and first using the appliance, read this

user manual carefully, including its hints

and warnings. To avoid unnecessary mis-

takes and accidents, it is important to

ensure that all people using the appli-

ance are thoroughly familiar with its op-

eration and safety features. Save these

instructions and make sure that they re-

main with the appliance if it is moved or

sold, so that everyone using it through

its life will be properly informed on ap-

pliance use and safety.

For the safety of life and property keep

the precautions of these user's instruc-

tions as the manufacturer is not respon-

sible for damages caused by omission.

1.1 Children and vulnerable

people safety

• This appliance is not intended for use

by persons (including children) with re-

duced physical, sensory or mental ca-

pabilities, or lack of experience and

knowledge, unless they have been giv-

en supervision or instruction concern-

ing use of the appliance by a person

responsible for their safety.

Children should be supervised to en-

sure that they do not play with the ap-

pliance.

• Keep all packaging well away from

children. There is risk of suffocation.

• If you are discarding the appliance

pull the plug out of the socket, cut the

connection cable (as close to the ap-

pliance as you can) and remove the

door to prevent playing children to

suffer electric shock or to close them-

selves into it.

• If this appliance featuring magnetic

door seals is to replace an older appli-

ance having a spring lock (latch) on

the door or lid, be sure to make that

spring lock unusable before you dis-

card the old appliance. This will pre-

vent it from becoming a death trap for

a child.

1.2 General safety

WARNING!

Keep ventilation openings, in the appli-

ance enclosure or in the built-in struc-

ture, clear of obstruction.

• The appliance is intended for keeping

foodstuff and/or beverages in a nor-

mal household as explained in this in-

struction booklet.

• Do not use a mechanical device or any

artificial means to speed up the thaw-

ing process.

• Do not use other electrical appliances

(such as ice cream makers) inside of

refrigerating appliances, unless they

are approved for this purpose by the

manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is

contained within the refrigerant circuit

of the appliance, a natural gas with a

high level of environmental compati-

bility, which is nevertheless flammable.

During transportation and installation

of the appliance, be certain that none

of the components of the refrigerant

circuit become damaged.

If the refrigerant circuit should be-

come damaged:

– avoid open flames and sources of

ignition

– thoroughly ventilate the room in

which the appliance is situated

• It is dangerous to alter the specifica-

tions or modify this product in any

way. Any damage to the cord may

cause a short-circuit, fire and/or elec-

tric shock.

WARNING!

Any electrical component (power

cord, plug, compressor) must be

replaced by a certified service

agent or qualified service per-

sonnel to avoid hazard.

1.

Power cord must not be length-

ened.

ENGLISH 3

2.

Make sure that the power plug is

not squashed or damaged by the

back of the appliance. A squashed

or damaged power plug may

overheat and cause a fire.

3.

Make sure that you can come to

the mains plug of the appliance.

4.

Do not pull the mains cable.

5.

If the power plug socket is loose,

do not insert the power plug.

There is a risk of electric shock or

fire.

6.

You must not operate the appli-

ance without the lamp cover (if

foreseen) of interior lighting.

• This appliance is heavy. Care should

be taken when moving it.

• Do not remove nor touch items from

the freezer compartment if your hands

are damp/wet, as this could cause skin

abrasions or frost/freezer burns.

• Avoid prolonged exposure of the ap-

pliance to direct sunlight.

• Bulb lamps (if foreseen) used in this

appliance are special purpose lamps

selected for household appliances use

only. They are not suitable for house-

hold room illumination.

1.3 Daily Use

• Do not put hot pot on the plastic parts

in the appliance.

• Do not store flammable gas and liquid

in the appliance, because they may

explode.

• Do not place food products directly

against the air outlet on the rear wall.

(If the appliance is Frost Free)

• Frozen food must not be re-frozen

once it has been thawed out.

• Store pre-packed frozen food in ac-

cordance with the frozen food manu-

facturer's instructions.

• Appliance's manufacturers storage

recommendations should be strictly

adhered to. Refer to relevant instruc-

tions.

• Do not place carbonated or fizzy

drinks in the freezer compartment as it

creates pressure on the container,

which may cause it to explode, result-

ing in damage to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

1.4 Care and cleaning

• Before maintenance, switch off the ap-

pliance and disconnect the mains plug

from the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove

frost from the appliance. Use a plastic

scraper.

• Regularly examine the drain in the re-

frigerator for defrosted water. If neces-

sary, clean the drain. If the drain is

blocked, water will collect in the bot-

tom of the appliance.

1.5 Installation

For electrical connection careful-

ly follow the instructions given in

specific paragraphs.

• Unpack the appliance and check if

there are damages on it. Do not con-

nect the appliance if it is damaged.

Report possible damages immediately

to the place you bought it. In that case

retain packing.

• It is advisable to wait at least four

hours before connecting the appli-

ance to allow the oil to flow back in

the compressor.

• Adequate air circulation should be

around the appliance, lacking this

leads to overheating. To achieve suffi-

cient ventilation follow the instructions

relevant to installation.

• Wherever possible the back of the

product should be against a wall to

avoid touching or catching warm parts

(compressor, condenser) to prevent

possible burn.

• The appliance must not be located

close to radiators or cookers.

• Make sure that the mains plug is ac-

cessible after the installation of the ap-

pliance.

• Connect to potable water supply only

(If a water connection is foreseen).

4

www.aeg.com

1.6 Service

• Any electrical work required to do the

servicing of the appliance should be

carried out by a qualified electrician or

competent person.

• This product must be serviced by an

authorized Service Centre, and only

genuine spare parts must be used.

1.7 Environment Protection

This appliance does not contain

gasses which could damage the

ozone layer, in either its refriger-

ant circuit or insulation materials.

The appliance shall not be dis-

carded together with the urban

refuse and rubbish. The insula-

tion foam contains flammable

gases: the appliance shall be dis-

posed according to the applica-

ble regulations to obtain from

your local authorities. Avoid

damaging the cooling unit, espe-

cially at the rear near the heat ex-

changer. The materials used on

this appliance marked by the

symbol

are recyclable.

2. CONTROL PANEL

1 2 3 4 5 6 7

8 9 10 11 12 13 14 15 16

1

Fridge Pilot light

2

Fridge ON/OFF switch

3

Fridge temperature regulator, + but-

ton

4

Fridge temperature indicator

5

Fridge temperature regulator, - but-

ton

6

DYNAMICAIR indicator

7

DYNAMICAIR button

8

Appliance Pilot light

9

Appliance ON/OFF switch

10

Freezer temperature regulator, +

button

11

Freezer temperature indicator

12

Freezer temperature regulator, -

button

13

FROSTMATIC indicator

14

FROSTMATIC button

15

Alarm indicator

16

Alarm reset button

2.1 Switching on

1.

Insert the plug into the mains sock-

et.

2.

Press ON/OFF switch .

3.

The Pilot Light will light up.

4.

The alarm indicator light flashes

since the temperature is reached.

The acoustic alarm sounds.

5.

Press the alarm reset button to reset

the alarm.

2.2 Switching off the fridge

1.

Keep ON/OFF switch pressed for

more than 5 seconds.

2.

A countdown on the temperature in-

dicator, from -3 -2 -1 will be shown.

When “1” appears the fridge is

turned off. The temperature indica-

tor switches off. The Pilot light

switches off.

ENGLISH 5

2.3 Switching off the

appliance

1.

Keep ON/OFF switch pressed for

more than 5 seconds.

2.

A countdown on the temperature in-

dicators, from -3 -2 -1 will be shown.

When “1” appears the appliance is

turned off. The temperature indica-

tors switch off. The Pilot lights switch

off.

2.4 High temperature alarm

In the event of an abnormal temperature

rise inside the freezer (e.g. power cut)

alarm indicator light will start to flash

and a buzzer will sound.

Push the alarm reset button to stop the

buzzer sound, while the alarm indicator

light will continue to flash.

The buzzer will stop automatically when

the temperature has returned to normal

while the alarm indicator light will contin-

ue to flash.

Press the alarm reset button. The alarm

indicator light goes out and at the same

time the freezer temperature indicator

show for about 5 seconds the warmest

temperature reached in the freezer com-

partment.

2.5 Temperature setting

buttons

The temperature is adjusted using the

temperature setting buttons. These but-

tons are connected to the temperature

indicator.

• Each time one of the two buttons is

pressed again the temperature is ad-

justed by 1°C. The set temperature

will be reached within 24 hours.

2.6 Temperature indicators

The temperature indicators show several

information:

• During normal operation, the temper-

ature currently set for fridge and freez-

er are displayed.

• When the temperature is being adjus-

ted a flashing display indicates the

fridge/freezer temperature currently

set.

2.7 Temperature regulation

To operate the appliance, proceed as

follows:

1.

Set the required temperature by

pressing the corresponding temper-

ature regulator. The temperature in-

dicator will immediately show the

changed setting and the tempera-

ture indicator flashes.

2.

Each time the temperature regulator

is pressed the temperature is adjus-

ted by 1 °C. The set temperature will

be reached within 24 hours.

3.

The temperature indicator will

change from flashing to continuous

illumination.

For a correct storage of the food the fol-

lowing temperatures should be set:

• +5 °C in the fridge

• -18 °C in the freezer.

When the setting is changed, the

compressor does not start imme-

diately if automatic defrosting is

currently taking place. As the

storage temperature within the

fridge is reached quickly you can

store food immediately after

switching on.

2.8 DYNAMICAIR function

To switch on the function:

1.

Press the DYNAMICAIR button.

2.

The DYNAMICAIR indicator is

shown.

To switch off the function:

1.

Press the DYNAMICAIR button.

2.

The DYNAMICAIR indicator goes

off.

If the function is activated auto-

matically the DYNAMICAIR indi-

cator is not shown (refer to "Daily

use").

The activation of the DYNAMI-

CAIR function increases the ener-

gy consumption.

2.9 COOLMATIC function

The COOLMATIC function is suitable for

quick cooling of large quantities of

goods in the refrigerator.

To activate the function, do these steps:

6

www.aeg.com

1.

Press the Fridge Temperature - but-

ton (several times if necessary) until

the word “SC” appears in the dis-

play.

A temperature of +2°C is automati-

cally selected.

To deactivate the function, do these

steps:

1.

Press the Fridge Temperature + but-

ton .

The COOLMATIC function stops

automatically after about 6 hours.

If the COOLMATIC function is switched

on the temperature setting may not be

changed.

2.10 Holiday function

This function allows you to keep the re-

frigerator shut and empty during a long

holiday period (e.g. the summer holi-

days) without the formation of a bad

smell.

The fridge compartment must be

empty when the holiday function

is on.

To activate the function:

1.

press continuously the temperature

regulator (+ button) until the letter

"H" (Holiday) appears on the tem-

perature indicator. The Holiday func-

tion sets the temperature approx

+15°C. The refrigerator is in the en-

ergy-saving mode.

To deactivate the function:

1.

set the required temperature by

pressing the fridge temperature reg-

ulator.

2.11 FROSTMATIC function

The FROSTMATIC function accelerates

the freezing of fresh food and, at the

same time, protects foodstuffs already

stored from undesirable warming.

To activate the function, do these steps:

1.

Press the FROSTMATIC button.

2.

The FROSTMATIC indicator switches

on.

The FROSTMATIC function is ended au-

tomatically after a period of 52 hours.

You can deactivate the function at any

time:

1.

Press the FROSTMATIC button.

2.

The FROSTMATIC indicator switches

off.

3. DAILY USE

3.1 Cleaning the interior

Before using the appliance for the first

time, wash the interior and all internal

accessories with lukewarm water and

some neutral soap so as to remove the

typical smell of a brand-new product,

then dry thoroughly.

Do not use detergents or abra-

sive powders, as these will dam-

age the finish.

3.2 Freezing fresh food

The freezer compartment is suitable for

freezing fresh food and storing frozen

and deep-frozen food for a long time.

To freeze fresh food activate the FROST-

MATIC function at least 24 hours before

placing the food to be frozen in the

freezer compartment.

Place the fresh food to be frozen in the

upper compartment.

The maximum amount of food that can

be frozen in 24 hours is specified on the

rating plate, a label located on the in-

side of the appliance.

The freezing process lasts 24 hours: dur-

ing this period do not add other food to

be frozen.

3.3 Storage of frozen food

When first starting-up or after a period

out of use, before putting the products

in the compartment let the appliance run

at least 2 hours on the higher settings.

If large quantities of food are to be stor-

ed, remove all drawers and baskets from

appliance and place food on cooling

shelves to obtain the best performance.

ENGLISH 7

WARNING!

Make sure that foods do not ex-

ceed the load limit stated on the

side of the upper section (where

applicable)

In the event of accidental de-

frosting, for example due to a

power failure, if the power has

been off for longer that the value

shown in the technical character-

istics chart under "rising time",

the defrosted food must be con-

sumed quickly or cooked imme-

diately and then re-frozen (after

cooling).

3.4 Thawing

Deep-frozen or frozen food, prior to be-

ing used, can be thawed in the refrigera-

tor compartment or at room tempera-

ture, depending on the time available

for this operation.

Small pieces may even be cooked still

frozen, directly from the freezer: in this

case, cooking will take longer.

3.5 Ice-cube production

This appliance is equipped with one or

more trays for the production of ice-

cubes. Fill these trays with water, then

put them in the freezer compartment.

Do not use metallic instruments

to remove the trays from the

freezer.

3.6 Cold accumulators

One or more cold accumulators are sup-

plied in the freezer; these increase the

length of time for which food will keep in

the event of a power failure or break-

down.

3.7 Movable shelves

The walls of the refrigerator are equip-

ped with a series of runners so that the

shelves can be positioned as desired.

For better use of space, the front half-

shelves can lie over the rear ones.

3.8 Positioning the door

shelves

To permit storage of food packages of

various sizes, the door shelves can be

placed at different heights.

8

www.aeg.com

3.9 Positioning the sliding box

The sliding box can be placed at differ-

ent heights.

Do make these adjustments proceed as

follow:

1.

lift the shelf with the sliding box up-

wards and out of the holders in the

door

2.

remove the retaining bracket out of

the guide under the shelf

3.

Reverse the above operation to in-

sert the sliding box at a different

height.

3.10 DYNAMICAIR

The refrigerator compartment is equip-

ped with a device that allows for rapid

cooling of foods and more uniform tem-

perature in the compartment.

This device activates by itself when nee-

ded, for example for a quick tempera-

ture recovering after door opening or

when the ambient temperature is high.

Allows you to switch on the device man-

ually when needed (refer to "DYNAMI-

CAIR Function").

The DYNAMICAIR device stops when

the door is open and restarts immediate-

ly after the door closing.

4. HELPFUL HINTS AND TIPS

4.1 Hints for energy saving

• Do not open the door frequently or

leave it open longer than absolutely

necessary.

• If the ambient temperature is high and

the Temperature Regulator is set to

low temperature and the appliance is

fully loaded, the compressor may run

continuously, causing frost or ice on

the evaporator. If this happens, set the

Temperature Regulator toward warm-

er settings to allow automatic defrost-

ing and so a saving in electricity con-

sumption.

4.2 Hints for fresh food

refrigeration

To obtain the best performance:

• do not store warm food or evaporat-

ing liquids in the refrigerator

• do cover or wrap the food, particularly

if it has a strong flavour

• position food so that air can circulate

freely around it

ENGLISH 9

4.3 Hints for refrigeration

Useful hints:

Meat (all types) : wrap in polythene bags

and place on the glass shelf above the

vegetable drawer.

For safety, store in this way only one or

two days at the most.

Cooked foods, cold dishes, etc..: these

should be covered and may be placed

on any shelf.

Fruit and vegetables: these should be

thoroughly cleaned and placed in the

special drawer(s) provided.

Butter and cheese: these should be

placed in special airtight containers or

wrapped in aluminium foil or polythene

bags to exclude as much air as possible.

Milk bottles: these should have a cap

and should be stored in the bottle rack

on the door.

Bananas, potatoes, onions and garlic, if

not packed, must not be kept in the re-

frigerator.

4.4 Hints for freezing

To help you make the most of the freez-

ing process, here are some important

hints:

• the maximum quantity of food which

can be frozen in 24 hrs. is shown on

the rating plate;

• the freezing process takes 24 hours.

No further food to be frozen should

be added during this period;

• only freeze top quality, fresh and thor-

oughly cleaned, foodstuffs;

• prepare food in small portions to ena-

ble it to be rapidly and completely fro-

zen and to make it possible subse-

quently to thaw only the quantity re-

quired;

• wrap up the food in aluminium foil or

polythene and make sure that the

packages are airtight;

• do not allow fresh, unfrozen food to

touch food which is already frozen,

thus avoiding a rise in temperature of

the latter;

• lean foods store better and longer

than fatty ones; salt reduces the stor-

age life of food;

• water ices, if consumed immediately

after removal from the freezer com-

partment, can possibly cause the skin

to be freeze burnt;

• it is advisable to show the freezing in

date on each individual pack to enable

you to keep tab of the storage time.

4.5 Hints for storage of frozen

food

To obtain the best performance from

this appliance, you should:

• make sure that the commercially fro-

zen foodstuffs were adequately stored

by the retailer;

• be sure that frozen foodstuffs are

transferred from the foodstore to the

freezer in the shortest possible time;

• not open the door frequently or leave

it open longer than absolutely neces-

sary;

• once defrosted, food deteriorates rap-

idly and cannot be refrozen;

• do not exceed the storage period in-

dicated by the food manufacturer.

5. CARE AND CLEANING

CAUTION!

Unplug the appliance before car-

rying out any maintenance oper-

ation.

This appliance contains hydrocar-

bons in its cooling unit; mainte-

nance and recharging must

therefore only be carried out by

authorized technicians.

5.1 Periodic cleaning

The equipment has to be cleaned regu-

larly:

• clean the inside and accessories with

lukewarm water and some neutral

soap.

• regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

10

www.aeg.com

• rinse and dry thoroughly.

Do not pull, move or damage

any pipes and/or cables inside

the cabinet.

Never use detergents, abrasive

powders, highly perfumed clean-

ing products or wax polishes to

clean the interior as this will dam-

age the surface and leave a

strong odour.

Clean the condenser (black grill) and the

compressor at the back of the appliance

with a brush. This operation will improve

the performance of the appliance and

save electricity consumption.

Take care of not to damage the

cooling system.

Many proprietary kitchen surface clean-

ers contain chemicals that can attack/

damage the plastics used in this appli-

ance. For this reason it is recommended

that the outer casing of this appliance is

only cleaned with warm water with a little

washing-up liquid added.

After cleaning, reconnect the equipment

to the mains supply.

5.2 Defrosting of the refrigerator

Frost is automatically eliminated from

the evaporator of the refrigerator com-

partment every time the motor compres-

sor stops, during normal use. The de-

frost water drains out through a trough

into a special container at the back of

the appliance, over the motor compres-

sor, where it evaporates.

Periodically clean the defrost water drain

hole in the middle of the refrigerator

compartment channel to prevent the wa-

ter overflowing and dripping onto the

food inside. Use the special cleaner pro-

vided, which you will find already inser-

ted into the drain hole.

5.3 Defrosting the freezer

A certain amount of frost will always form

on the freezer shelves and around the

top compartment.

Defrost the freezer when the frost layer

reaches a thickness of about 3-5 mm.

About 12 hours prior to defrost-

ing, set the Temperature regula-

tor toward higher settings, in or-

der to build up sufficient chill re-

serve for the interruption in oper-

ation.

ENGLISH 11

To remove the frost, follow the instruc-

tions below:

1.

Switch off the appliance.

2.

Remove any stored food, wrap it in

several layers of newspaper and put

it in a cool place.

CAUTION!

Do not touch frozen goods with

wet hands. Hands can freeze to

the goods.

3.

Leave the door open and insert the

plastic scraper in the appropriate

seating at the bottom centre, plac-

ing a basin underneath to collect the

defrost water.

In order to speed up the defrost-

ing process, place a pot of warm

water in the freezer compart-

ment. In addition, remove pieces

of ice that break away before de-

frosting is complete.

4.

When defrosting is completed, dry

the interior thoroughly and keep the

scraper for future use.

5.

Switch on the appliance.

6.

After two or three hours, reload the

previously removed food into the

compartment.

Never use sharp metal tools to scrape

off frost from the evaporator as you

could damage it.

Do not use a mechanical device or any

artificial means to speed up the thawing

process other than those recommended

by the manufacturer.

A temperature rise of the frozen food

packs, during defrosting, may shorten

their safe storage life.

5.4 Periods of non-operation

When the appliance is not in use for

long periods, take the following precau-

tions:

• disconnect the appliance from elec-

tricity supply

• remove all food

• defrost (if foreseen) and clean the ap-

pliance and all accessories

• leave the door/doors ajar to prevent

unpleasant smells.

If the cabinet will be kept on, ask some-

body to check it once in a while to pre-

vent the food inside from spoiling in

case of a power failure.

12

www.aeg.com

6. WHAT TO DO IF…

WARNING!

Before troubleshooting, discon-

nect the mains plug from the

mains socket.

Only a qualified electrician or

competent person must do the

troubleshooting that is not in this

manual.

Problem Possible cause Solution

The appliance is

noisy

The appliance is not sup-

ported properly

Check if the appliance

stands stable (all the four

feet should be on the

floor)

The appliance does

not operate. The

lamp does not oper-

ate.

The appliance is switched

off.

Switch on the appliance.

The mains plug is not

connected to the mains

socket correctly.

Connect the mains plug to

the mains socket correctly.

The appliance has no

power. There is no volt-

age in the mains socket.

Connect a different electri-

cal appliance to the mains

socket.

Contact a qualified electri-

cian.

The lamp does not

work.

The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the

lamp".

The buzzer sounds.

The Alarm light

flashing.

The temperature in the

freezer is too high.

Refer to "High Tempera-

ture Alarm".

The compressor op-

erates continually.

The temperature is not

set correctly.

Set a higher temperature.

The door is not closed

correctly.

Refer to "Closing the

door".

The door has been

opened too frequently.

Do not keep the door

open longer than necessa-

ry.

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

The room temperature is

too high.

Decrease the room tem-

perature.

ENGLISH 13

Problem Possible cause Solution

The compressor

does not start imme-

diately after press-

ing the FROSTMAT-

IC or COOLMATIC

button, or after

changing the tem-

perature.

This is normal, no error

has occurred.

The compressor starts af-

ter a period of time.

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products

do not touch the rear

plate.

The temperature in

the appliance is too

low/high.

The temperature regula-

tor is not set correctly.

Set a higher/lower temper-

ature.

The door is not closed

correctly.

Refer to "Closing the

door".

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

Many products are stored

at the same time.

Store less products at the

same time.

The temperature in

the refrigerator is

too high.

There is no cold air circu-

lation in the appliance.

Make sure that there is

cold air circulation in the

appliance.

The temperature in

the freezer is too

high.

Products are too near to

each other.

Store products so that

there is cold air circulation.

There is too much

frost.

Food is not wrapped cor-

rectly.

Wrap the food correctly.

The door is not closed

correctly.

Refer to "Closing the

door".

The temperature regula-

tor is not set correctly.

Set a higher temperature.

Upper or lower

square is shown in

the temperature Dis-

play.

An error has occurred in

measuring the tempera-

ture.

Call your service represen-

tative (the cooling system

will continue to keep food

products cold, but temper-

ature adjustment will not

be possible).

14

www.aeg.com

Problem Possible cause Solution

dEMo appears on

the Display.

The appliance is in dem-

onstration mode (dEMo).

Keep pressed approxi-

mately 10 sec. the OK but-

ton since a long sound of

buzzer is heard and the

Display shut off for a short

while: appliance start

works regularly.

6.1 Replacing the lamp

The appliance is equipped with a long-

life LED interior light.

Only service is allowed to replace the

lighting device. Contact your Service

Center.

6.2 Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer

to "Installation".

3.

If necessary, replace the defective

door gaskets. Contact the Service

Center.

7. INSTALLATION

WARNING!

Read the "Safety Information"

carefully for your safety and cor-

rect operation of the appliance

before installing the appliance.

7.1 Positioning

Install this appliance at a location where

the ambient temperature corresponds to

the climate class indicated on the rating

plate of the appliance:

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

7.2 Electrical connection

Before plugging in, ensure that the volt-

age and frequency shown on the rating

plate correspond to your domestic pow-

er supply.

The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the do-

mestic power supply socket is not earth-

ed, connect the appliance to a separate

earth in compliance with current regula-

tions, consulting a qualified electrician.

The manufacturer declines all responsi-

bility if the above safety precautions are

not observed.

This appliance complies with the E.E.C.

Directives.

ENGLISH 15

7.3 Door reversibility

The door of the appliance opens to the

right. If you want to open the door to the

left, do these steps before you install the

appliance:

• Loosen the upper pin and remove the

spacer.

• Remove the upper pin and the upper

door.

B

C

• Unscrew the pins (B) and spacers (C).

• Remove the lower door.

• Loosen the lower pin.

On the opposite side:

• Install the lower pin.

• Install the lower door.

• Refit the pins (B) and the spacers (C)

on the middle hinge on the opposite

side.

• Install the upper door.

• Tighten the spacer and the upper pin.

16

www.aeg.com

7.4 Ventilation requirements

5 cm

min.

200 cm

2

min.

200 cm

2

The airflow behind the appliance must

be sufficient.

7.5 Installing the appliance

CAUTION!

Make sure that the mains cable

can move freely.

Do these steps.

x

If necessary cut the adhesive sealing strip

and then apply it to the appliance as

shown in figure.

A1A

Drill the hinge cover A, as shown in figure.

Apply the covers A and A1 (in the acces-

sories bag) in to the middle hinge.

ENGLISH 17

1

2

Install the appliance in the niche.

Push the appliance in the direction of the

arrow (1) until the upper gap cover stops

against the kitchen furniture.

Push the appliance in the direction of the

arrow (2) against the cupboard on the op-

posite side of the hinge.

4 mm

44 mm

Adjust the appliance in the niche.

Make sure that the distance between the

appliance and the cupboard front-edge is

44 mm.

The lower hinge cover (in the accessories

bag) makes sure that the distance be-

tween the appliance and the kitchen furni-

ture is correct.

Make sure that the clearance between the

appliance and the cupboard is 4 mm.

Open the door. Put the lower hinge cover

in position.

I

Attach the appliance to the niche with 4

screws.

18

www.aeg.com

Remove the correct part from the hinge

cover (E). Make sure to remove the part

DX, in the case of right hinge, SX in oppo-

site case.

E

B

D

C

Attach the covers (C, D) to the lugs and

the hinge holes.

Install the vent grille (B).

Attach the hinge covers (E) to the hinge.

H

If the appliance must connect laterally to

the kitchen furniture door:

1.

Slacken the screws in fixing brackets

(H).

2.

Move the brackets (H).

3.

Retighten the screws.

ENGLISH 19

Disconnect the parts (Ha), (Hb), (Hc) and

(Hd).

ca. 50 mm

21 mm

90°

21 mm

Install the part (Ha) on the inner side of

the kitchen furniture.

Ha

Hc

Push the part (Hc) on the part (Ha).

Ha

Hb

8 mm

Open the appliance door and the kitchen

furniture door at an angle of 90°.

Insert the small square (Hb) into guide

(Ha).

Put together the appliance door and the

furniture door and mark the holes.

20

www.aeg.com

Sidan laddas ...

Aeg-Electrolux SCD71800S0 Användarmanual

Aeg-Electrolux SCD71800S0 Användarmanual

på andra språk

Relaterade papper

Andra dokument