Sony CDX-C780R Användarmanual

Operating Instructions

Manual de instrucciones

Manual de instruções

Bruksanvisning

 1998 by Sony Corporation

EN

ES

S

P

FM/MW/LW

Compact Disc

Player

CDX-C880R

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

3-864-436-11 (1)

2

EN

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features by using either a supplied rotary

commander or an optional wireless remote.

In addition to the CD playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play back a CD TEXT disc*

2

.

*

1

You can also connect a CD changer and an MD

changer.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name

and track names.

These information is recorded on the disc.

Voice Drive

Sony has developed a new function which

contributes to safer driving.

In addition to our unique rotary commander,

we now introduce a voice sensitive operating

system Voice Drive which gives the driver

voice control of the car audio.

Now, while keeping your eyes on the road,

you can command operations with Voice Drive

and confirm results with Voice Guide.

And you can also record your voice with the

voice memo function. It will take a note for

you when you see or think of something while

you are driving.

Voice guide for safe driving

This unit has a voice guide function*. When

the voice guide function is on, the unit gives

vocalized comments on functions

corresponding to the relevant button pushed.

* Some optional power amplifiers may cause a

break at the beginning of vocalized comments.

When you connect an optional MD changer, the

sound from the first MD may continue for a short

time even after the vocalized comments about

the second MD are announced.

3

EN

Table of Contents

This Unit Only

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

Preparing the rotary commander ..................... 7

Setting the clock .................................................. 7

CD Player

Listening to a CD ................................................ 8

Playing a CD in various modes ...................... 10

Creating a programme

— CD Programme Memory ....................... 11

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................. 13

Memorising only the desired stations............ 14

Receiving the memorised stations .................. 14

RDS

Overview of the RDS function ........................ 15

Displaying the station name............................ 15

Re-tuning the same programme automatically

— Alternative Frequencies (AF) ................ 15

Listening to traffic announcements ................ 17

Presetting the RDS stations with the AF and

TA data .......................................................... 18

Recording the traffic announcements

—Traffic Information Replay (TIR)........... 18

Locating a station by programme type .......... 20

Setting the clock automatically ....................... 21

Voice Drive

Selecting a “V Drive” box for registration..... 21

Registering a vocal phrase ............................... 22

Requesting a registered source ....................... 23

Voice Memo

Recording a voice memo .................................. 23

Playing back the voice memo .......................... 24

Erasing the voice memo ................................... 24

Other Functions

Using the rotary commander .......................... 24

Adjusting the sound characteristics ............... 26

Attenuating the sound ..................................... 26

Changing the sound and display settings ..... 26

Adjusting the frequency of the

subwoofer(s) ................................................. 27

With Optional Equipment

CD/MD Unit

Playing a CD or MD ......................................... 27

Scanning the tracks

— Intro Scan ................................................. 28

Playing tracks repeatedly

— Repeat Play .............................................. 29

Playing tracks in random order

— Shuffle Play .............................................. 29

Creating a programme

— Programme Memory .............................. 29

Labelling a CD

— Disc Memo ............................................... 32

Locating a disc by name

— List-up ...................................................... 33

Selecting specific tracks for playback

— Bank .......................................................... 34

DSP

Selecting a surround menu.............................. 35

Storing a surround effect onto CDs

— Digital Signal Processor (DSP) Custom

File.................................................................. 36

Selecting the listening position ....................... 36

Adjusting the fader (FAD) ............................... 37

Adjusting the volume of the subwoofer(s).... 37

Adjusting the volume of the bass and

treble .............................................................. 38

Listening to each programme source in its

registered surround menu

— Last Sound Memory (LSM) ................... 39

Changing the line output level ....................... 39

Additional Information

Precautions......................................................... 39

Maintenance....................................................... 40

Dismounting the unit ....................................... 41

Specifications ..................................................... 42

Troubleshooting guide ..................................... 43

4

EN

Location of controls

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) control

9, 11, 12, 14, 16, 19, 20, 21, 28, 29, 31, 34

2 MODE (band/unit select) button

13, 14, 27, 29, 33

3 6 (eject) button (located on the front

side of the unit hidden by the front

panel) 8

4 SOURCE (source select) button

8, 13, 14, 17, 24, 27, 29, 33, 35, 37, 38

5 Dial (volume/subwoofer volume/bass/

treble/left-right/rear-front control)

7, 26, 32, 33, 35, 36, 37, 38, 39

6 SOUND button 26, 35, 36, 37, 38, 39

7 DSPL (display mode change) button

9, 14, 15, 27, 28, 32, 33

8 Display window

9 OPEN button 6, 8, 40

!º PTY/LIST button

Disc Memo 32, 33

DSP Custom File 36

List-up 33

RDS Programme 20

!¡ AF/TA button 15, 16, 17, 18

!™ OFF button 6, 8

!£ Reset button (located on the front side

of the unit behind by the front panel) 6

!¢ Sensor for the optional wireless remote

!∞ SHIFT button

PLAY MODE 10, 11, 12, 13, 14, 16, 18,

28, 29, 30, 31, 34

REP 10, 29

SET UP 7, 8, 9, 21, 26, 27, 28, 36, 39

SHUF 10, 29

!§ POWER SELECT switch (located on the

bottom of the unit)

See “POWER SELECT Switch” in the

Installation/Connections manual.

!¶ During radio reception:

Number buttons 14, 16

During CD/MD playback:

Direct disc selection buttons 28

!• TIR button 18, 19

S

E

K

/

A

M

S

MODE

OFF

SOUND

DSPL

PTY

LIST

OPEN

AF/TA

SOURCE

SHIFT

12345678910

TIR

CDX-C880R

5

EN

Optional wireless

remote (RM-X47)

The buttons of the wireless remote

control the same functions as those on

this unit.

1 OFF button

2 SEEK/AMS button

3 (–) (+) buttons

4 ATT button

5 SOUND/SEL button

6 DSPL button

7 PRESET/DISC button

You cannot do manual search and manual

tuning with the remote.

8 SOURCE button

9 MODE/DIR button

(MODE) controls the same function on this

unit.

When the POWER SELECT switch is set to the B position, the unit cannot be operated with the

wireless remote unless (SOURCE) on the unit is pressed or a CD is inserted to activate the unit

first.

OFF

SOURCE

DIR

SEL

+

FF

–

REW

SOUND

–

+

ATT DSPL

SEEK

AMS

PRESET

DISC

MODE

6

EN

Notes

• Do not place anything on the inner surface of

the front panel.

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still on,

the power will be turned off automatically to

prevent the speakers from being damaged.

• When you carry the front panel with you, put it

in the supplied front panel case.

Attaching the front panel

Place the hole a in the front panel onto the

spindle b on the unit as illustrated, then push

the left side in.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel hard against the

unit when attaching it. Press it lightly against the

unit.

• Do not press hard or put excessive pressure on

the display windows of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight

where there may be a considerable rise in

temperature.

Reset button

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ballpoint pen.

Notes

• Pressing the reset button will erase the clock and

some memorised functions.

• When you connect the power supply cord to the

unit or reset the unit, wait for about 10 seconds

before you insert a disc. If you insert a disc within

these 10 seconds, the unit will not be reset, and

you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN) to open the front panel,

then slide the front panel to the right

side, and pull out from the left side of

the front panel.

µ

a

b

1

2

7

EN

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds

(only when the POWER SELECT switch is set

to the A position).

TIR indicator

If you pull out the ignition key while the TIR

function is on, the TIR indicator flashes a few

times. (only when the POWER SELECT switch

is set to the A position).

For more information on the TIR function,

refer to “Recording the traffic announcements”

(page 18).

Preparing the rotary

commander

When you mount the rotary commander,

attach the labels as shown in the illustration

below.

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (SHIFT), then press (3) (SET UP).

1 Press (5) (n).

The hour digit flashes.

2 Set the hour.

3 Press (5) (n).

The minute digits flash.

4 Set the minute.

2 Press (SHIFT).

The clock starts.

to go forward

to go backward

to go forward

to go backward

continue to next page n

TIR indicator

Getting Started

SET UP

REC

r

PLAY

(

TA

LK

VOICE

MEMO

SO

UND

MODE

LIST

r

R

EC

(

P

LAY

TALK

V

O

IC

E

M

E

M

O

L

IS

T

MODE

SOUND

8

EN

Track number

Elapsed playing time

3 Press (SHIFT).

After the mode setting is complete, the

display return to normal playback mode.

Note

If the POWER SELECT switch on the bottom of the

unit is set to the B position, turn the power on

first, then set the clock.

Labelled side up

CD Player

Listening to a CD

1 Press (OPEN) and insert the CD.

Playback starts automatically.

2 Close the front panel.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears.

Note

To play back an 8 cm CD, use the optional Sony

compact disc single adapter (CSA-8).

To Press

Stop playback (OFF)

Eject the CD (OPEN) then 6

6

TRACK

9

EN

Getting Started/CD Player

If you press (DSPL) to change the display

item, the disc or track name of the CD TEXT

disc is scrolled automatically whether you set

the function on or off.

1 During playback, press (SHIFT).

2 Press (3) (SET UP) repeatedly until

“A.Scrl” appears.

3 Press (5) (n) to select “A.Scrl on.”

4 Press (SHIFT).

To cancel Auto Scroll, select “A.Scrl off” in

step 3 above.

Note

For some CD TEXT discs with extremely many

characters, the following cases may happen:

— Some of the characters are not displayed.

— Auto Scroll does not work.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down momentarily.

Locating a specific point in a track

— Manual Search

During playback, push the SEEK/AMS

control up or down and hold.

Release when you have found the

desired point.

Note

If “

” or “ ” appears in the display,

that means you have reached the beginning or the

end of the disc and you cannot go any further.

To locate

preceding tracks

To locate succeeding

tracks

To search backward

To search forward

Changing the displayed item

Each time you press (DSPL), the item changes

as follows:

$

Elapsed playback time

$

Disc name*

1

/Artist name*

2

$

Track name*

1

$

Clock

$

MOTION DISPLAY*

3

*

1

If you inserted a non-CD TEXT disc,

“NO D.Name” or “NO T.Name” appears in the

display.

*

2

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only

for CD TEXT discs with the artist name.)

*

3

All the items above are scrolled in the display

one by one in order.

You can label CD and CD TEXT discs with a

personalized name using the disc memo

function, refer to “Labelling a CD” (page 32).

However, if you use personalised labels, they

will always take priority over the original CD

TEXT information when such information is

displayed.

Tips

• If the name of the CD TEXT disc is too long, you

can scroll it across the display by pressing

(SHIFT), then (2) (N).

• If you want to display the original CD TEXT

information after labelling the CD TEXT disc with

a personalised name, press (SHIFT) , then (5)

(n).

Automatically scrolling a disc name

— Auto Scroll

If the disc name/artist name or track name on

a CD TEXT disc exceeds 10 characters and the

Auto Scroll function is on, the disc or artist

name automatically scrolls on the display as

follows:

• The disc name appears when the disc has

changed (if the disc name is selected).

• The track name appears when the track has

changed (if the track name is selected).

10

EN

DSPL

A

SHIFT

1234567891

0

SET UP PLAY MODE

REP SHUF

Playing tracks repeatedly

— Repeat Play

1 During playback, press (SHIFT).

2 Press (7) (REP) repeatedly until ”Repeat

1“ appears.

Repeat Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“Repeat off” in step 2 above.

Playing tracks in random order

— Shuffle Play

1 During playback, press (SHIFT).

2 Press (8) (SHUF) repeatedly until ”Shuf

1“ appears.

Shuffle Play starts.

3 Press (SHIFT).

To return to normal playback mode, select

“Shuf off” in step 2 above.

Playing a CD in various

modes

You can play CDs in various modes:

•Intro (Intro Scan) lets you play the first 10

seconds of all the tracks.

•Repeat (Repeat Play) repeats the current

track.

•Shuf (Shuffle Play) plays all the tracks in

random order.

Searching for the desired track

— Intro scan

1 Press (SHIFT).

Every time you press (SHIFT), only the

items you can select light up.

2 Press (4) (PLAY MODE) repeatedly until

“Intro” appears.

Each time you press (4) (PLAY MODE),

the item changes as follows:

Intro ˜ PGM

3 Press (5) (n) to select “Intro on.”

Intro Scan starts.

4 Press (SHIFT).

To return to normal playback mode, select

“Intro off” in step 3 above.

PLAY MODE

AF

/

SHIFT

12345678910

SET UP PLAY MODE

REP SHUF

DSPL

P

A

F

SHIFT

12345678910

SET UP PLAY MODE

REP SHUF

11

EN

Creating a programme

— CD Programme Memory

You can play the tracks in the order you want

by making your own programme. You can

make two programmes: Programme 1 and

Programme 2. You can select up to 12 tracks

for each programme. You can store the

programmes in memory.

1 Press (SHIFT), then press (4) (PLAY

MODE) for two seconds.

“P 1” indicates Programme 1 is selected.

To select Programme 2, press (5) (n)

repeatedly until “P 2” appears.

2 Push the SEEK/AMS control up or down

to select the track you want.

3 Press (6) (ENTER) momentarily.

4 To continue entering tracks, repeat steps

2 and 3.

5 When you finish selecting tracks, press

(4) (PLAY MODE) for two seconds.

6 Press (SHIFT).

Notes

• “*Wait*” appears in the display while the unit is

reading the data.

• “*Mem Full*” appears in the display when you

try to enter more than 12 tracks into a

programme.

PLAY

TRACK

MODE ENTER

µ

PLAY MODE ENTER

PLAY

TRACK

MODE ENTER

Playing the stored programme

You can select:

•PGM 1 to play Programme 1.

•PGM 2 to play Programme 2.

•PGM 1+2 to play Programmes 1 and 2.

1 Press (SHIFT).

2 Press (4) (PLAY MODE) repeatedly until

“PGM” appears.

3 Press (5) (n) repeatedly until the

desired programme appears.

Programme 1 playback

µ

Programme 2 playback

µ

Programmes 1 and 2 playback

µ

Normal playback

Programme Play starts.

4 Press (SHIFT).

To return to normal playback mode, select

“PGM off” in step 3 above.

Note

“Not ready” appears in the display if no track is

stored in the programme.

continue to next page n

PGM

1

PLAY MODE

PGM

2

PLAY MODE

PGM

1+2

PLAY MODE

CD Player

12

EN

Track slot number

Erasing an entire programme

1 Press (SHIFT), then press (4) (PLAY

MODE) for two seconds.

“P 1” indicates Programme 1 is selected.

2 Press (2) (N) repeatedly until “DEL”

appears.

To delete Programme 2, press (5) (n)

repeatedly until “PGM 2” appears.

3 Press (6) (ENTER) for two seconds.

The entire programme is erased.

4 When you finish erasing programmes,

press (4) (PLAY MODE) for two seconds.

5 Press (SHIFT).

PLAY

TRACK

MODE ENTER

PLAY MODE ENTER

PLAY

TRACK

MODE ENTER

PLAY

TRACK

MODE ENTER

Adding tracks to a programme

1 Press (SHIFT), then press (4) (PLAY

MODE) for two seconds.

“P 1 ” indicates Programme 1 is selected.

To select Programme 2, press (5) (n)

repeatedly until “P 2” appears.

2 Press (2) (N) or (5) (n) to select the

track slot number where you want to

insert a track.

3 Push the SEEK/AMS control up or down

to select the track you want to insert.

4 Press (6) (ENTER) momentarily to enter

the track.

The current track in that slot number and

the succeeding tracks shift down.

5 To continue inserting tracks, repeat steps

2 through 4.

Note

Once all 12 slots have been filled, “*Mem

Full*” appears in the display, and you cannot

insert tracks.

6 When you finish inserting tracks, press

(4) (PLAY MODE) for two seconds.

7 Press (SHIFT).

PLAY MODE ENTER

13

EN

Erasing tracks in a programme

1 Press (SHIFT), then press (4) (PLAY

MODE) for two seconds.

“P 1” indicates Programme 1 is selected.

To select Programme 2, press (5) (n)

repeatedly until “P 2” appears.

2 Press (2) (N) or (5) (n) to select the

track you want to erase.

The track currently registered in slot 6 of

Programme 1.

3 Press (6) (ENTER) for two seconds.

When you erase a track from a slot number,

the succeeding tracks shift up to fill the gap.

4 To continue erasing tracks, repeat steps

2 and 3.

5 When you finish erasing tracks, press (4)

(PLAY MODE) for two seconds.

6 Press (SHIFT).

CD Player/Radio

Track slot number

µ

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 10

stations on each band (FM1, FM2, MW and

LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

CD ˜ TUNER

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

z FM1 z FM2 z MW z LW

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (n).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sound and the setting is stored.

5 Press (SHIFT).

Notes

• The unit does not store stations with weak

signals. If only a few stations are received, some

number buttons will retain their former setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

PLAY

TRACK

MODE ENTER

PLAY

TRACK

MODE ENTER

PLAY

DISC TRACK

MODE ENTER

PLAY

TRACK

MODE ENTER

14

EN

Memorising only the

desired stations

You can preset up to 20 FM stations (10 for

FM1 and FM2), and up to 10 LW stations in the

order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band (FM1, FM2, MW or LW).

3 Push the SEEK/AMS control up or down

to tune in the station you want to store

on the number button.

4 Press and hold the desired number

button ((1) to (10)) until “MEM”

appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band (FM1, FM2, MW or LW).

3 Press the number button ((1) to (10))

momentarily where the desired station is

stored.

If you cannot tune in a preset

station

Push the SEEK/AMS control up or down

momentarily to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (4) (PLAY MODE) repeatedly

until “Local” (local seek mode) is displayed. Then

press (5) (n) to select “Local on.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to push the SEEK/AMS control up or down

and hold until the desired frequency appears

(manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “Mono” appears.

2 Press (5) (n) repeatedly until “Mono

on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (SHIFT).

To return to normal mode, select “Mono off”

in step 2 above.

Changing the display items

Each time you press (DSPL), the item changes

as follows:

z Frequency z Clock

MOTION DISPLAY* Z

* All the items above are scrolled in the display

one by one in order.

15

EN

Radio/RDS

102.5MHz

96.0MHz

98.5MHz

Frequencies change automatically.

Station

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: re-tuning the same programme

automatically, listening to traffic

announcements and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 13).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

z Station Name (Frequency) z Clock

MOTION DISPLAY* Z

* All the items above are scrolled in the display

one by one in order.

Note

“NO Name” appears if the received station does

not transmit RDS data.

Re-tuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and re-tunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to re-tune the

station manually.

1 Select an FM station (page 13).

2 Press (AF/TA) repeatedly until “AF on”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA off” appears.

continue to next page n

16

EN

Local link function (United

Kingdom only)

The Local Link function lets you select other

local stations in the area, even though they are

not stored on your number buttons.

1 Press a number button ((1) to (10)) that

has a local station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Changing the display items

Each time you press (AF/TA), the item changes

as follows:

” AF on ” TA on ” AF TA on*

AF TA off “

* Select this to turn on both the AF and TA

functions.

Notes

• “NO AF” and the station name flash alternately,

if the unit cannot find an alternative station in

the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Push

the SEEK/AMS control up or down while the

station name is flashing (within eight seconds).

The unit starts searching for another frequency

with the same PI (Programme Identification) data

(“PI seek” appears and no sound is heard). If the

unit cannot find another frequency, “NO PI”

appears, and the unit returns to the originally

selected frequency.

Listening to a regional programme

The “REG on” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG on,” but if

you want to turn off the function, do the

following.

1 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “REG” appears.

2 Press (5) (n) repeatedly until “REG off”

appears.

3 Press (SHIFT).

Note that selecting “REG off” might cause

the unit to switch to another regional

station within the same network.

To go back to regional on, select “REG on” in

step 2 above.

Note

This function does not work in the United

Kingdom and in some other areas.

17

EN

RDS

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

”TA“ appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will automatically switch to the

announcement. If you are listening to a source

other than the radio, the emergency

announcements will be heard if you set AF or

TA to on. The unit will then automatically

switch to these announcements no matter what

you are listening to at the time.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even though you are

listening to other programme sources.

Press (AF/TA) repeatedly until “TA on” or

“AF TA on” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

• “NO TP” flashes for five seconds if the received

station does not broadcast traffic

announcements. Then, the unit starts searching

for a station that broadcasts traffic

announcements.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcements by other stations in the same

network.

• While the unit is receiving the traffic

announcements, the voice drive function and

voice memo function do not work.

To cancel the current traffic

announcement

Press (AF/TA) or (SOURCE) momentarily.

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until “AF

TA off” appears.

18

EN

Recording the traffic

announcements

—Traffic Information Replay (TIR)

You can listen to the latest traffic

announcements by recording them. The unit

automatically records and stores up to eight

traffic announcements. If the recording

exceeds eight minutes, the recorded

announcements are updated, so you can

always hear the latest information.

The TIR function turns on the unit

automatically and records the traffic

announcements for up to two hours before and

after a preset time.

Presetting the time and the station

1 Press and hold (TIR) until “TIR” lights up

in the display.

2 Press (5) (n) repeatedly until “TIR on”

appears.

3 Press (TIR) repeatedly until the hour

indication appears.

1 Set the hour by rotating the dial.

2 Press (5) (n) until the minute digits

flash.

3 Set the minute by rotating the dial.

4 Press (TIR).

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset station, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 13).

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

Note that selecting “AF TA off” stores not

only RDS stations, but also non-RDS

stations.

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (n) until “B.T.M” flashes.

5 Press (SHIFT).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

3 Press and hold the desired number

button until “MEM” appears.

Repeat from step 1 for presetting other

stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

REG

19

EN

Playing back the recorded traffic

announcements

When there are recorded traffic

announcements you have not listened to yet,

t flashes.

1 Press (TIR).

The latest traffic announcement is played

back. To listen to the previous ones, press

(TIR) or push the SEEK/AMS control up.

To replay the announcements, push the

SEEK/AMS control down.

“NO Data” appears if no traffic

announcements were recorded.

2 Press (TIR) to go back to the original

programme.

5 Select the desired station by pressing the

preset number button or pushing the

SEEK/AMS control up or down.

6 Press (TIR) for two seconds to return to

the original display.

t lights up.

The unit turns on automatically and stands

by for traffic announcements for four hours

(two hours before and after the preset

time).

If the preset station does not broadcast the

traffic announcement while searching, the

unit starts searching for other traffic

programme (TP) stations.

To cancel the TIR function

Select “TIR off” in step 2 above.

Tips

• While the unit is recording the traffic

announcement, t and “TA” flash.

• If the unit still cannot find a TP station, it starts a

new search every five minutes until it finds one.

• If you pull out the ignition key while the TIR

function is on, “TIR on” and t flash a few times.

Notes

• The unit also stands by for traffic

announcements for two hours after you turn off

the engine, as long as the TIR function is on.

• If you have a power aerial, it automatically

extends every time the unit searches for a traffic

programme station.

If you have a manual aerial, make sure that the

aerial is fully extended.

• If you do not use your car for about ten days, the

TIR function will turn off automatically to avoid

battery wear, even if the TIR function is on.

• While the unit is recording or playing back the

traffic announcements, the voice drive function

and voice memo function do not work.

RDS

8

20

EN

1 Press (PTY/LIST) during FM reception

until “PTY” appears.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

2 Press (PTY/LIST) repeatedly until the

desired programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “None” (Not specified) for

searching.

3 Push the SEEK/AMS control up or down.

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previous station.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Programme types Display

News News

Current Affairs Affairs

Information Info

Sports Sport

Education Educate

Drama Drama

Culture Culture

Science Science

Varied Varied

Popular Music Pop M

Rock Music Rock M

Middle of the Road Music M.o.R.M

Light Classical Light M

Classical Classics

Other Music Type Other M

Weather Weather

Finance Finance

Children’s programmes Children

Social Affairs Social A

Religion Religion

Phone In Phone In

Travel Travel

Leisure Leisure

Jazz Music Jazz

Country Music Country

National Music Nation M

Oldies Music Oldies

Folk Music Folk M

Documentary Document

Not specified None

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

Sidan laddas ...

Sony CDX-C780R Användarmanual

Denna manual är också lämplig för

Sony CDX-C780R Användarmanual

på andra språk

Relaterade papper

Andra dokument