Sony XR-C8100RW Användarmanual

Operating Instructions

Manual de instrucciones

Bruksanvisning

Manual de instruções

 1998 by Sony Corporation

EN

ES

P

S

FM/MW/LW

Cassette Car

Stereo

XR-C8100R

XR-C8100RW

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

3-864-065-11 (1)

2

EN

Welcome !

Thank you for purchasing the Sony Cassette

Player. This unit lets you enjoy a variety of

features by using either a supplied rotary

commander or a wireless remote.

In addition to the Cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

If you operate this unit or connect an optional

CD unit with the CD TEXT function, the CD

TEXT information will appear in the display

when you play back a CD TEXT disc*

2

.

*

1

You can connect to a CD changer or an MD

changer.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name

and track names.

This information is recorded on the disc.

Voice guide for safe driving

This unit has a voice guide function*. When

the voice guide function is on, the unit gives

vocalized comments on functions

corresponding to the relevant button pushed.

* Some optional power amplifiers may cause a

break at the beginning of vocalized comments.

When you connect an optional MD changer, the

sound from the first MD may continue for a

short time even after the vocalized comments

about the second MD are announced.

3

EN

Table of Contents

This Unit Only With Optional Equipment

Location of controls ................................................. 4

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

Preparing the rotary commander ..................... 7

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 8

Playing a tape in various modes ....................... 9

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................. 10

Memorising only the desired stations............ 11

Receiving the memorised stations .................. 11

RDS

Overview of the RDS function ........................ 12

Displaying the station name............................ 12

Re-tuning the same programme automatically

— Alternative Frequencies (AF) ................ 12

Listening to traffic announcements ................ 14

Presetting the RDS stations with

the AF and TA data ..................................... 15

Recording the traffic announcements

—Traffic Information Replay (TIR)........... 15

Locating a station by programme type .......... 17

Setting the clock automatically ....................... 18

Other Functions

Using the rotary commander .......................... 18

Adjusting the sound characteristics ............... 20

Attenuating the sound ..................................... 20

Changing the sound and display settings ..... 20

Adjusting the frequency of the

subwoofer(s) ................................................. 21

CD/MD Unit

Playing a CD or MD ......................................... 21

Scanning the tracks

— Intro Scan ................................................. 22

Playing tracks repeatedly

— Repeat Play .............................................. 23

Playing tracks in random order

— Shuffle Play .............................................. 23

Creating a programme

— Programme Memory .............................. 23

Labeling a CD

— Disc Memo ............................................... 26

Locating a disc by name

— List-up ...................................................... 27

Selecting specific tracks for playback

— Bank .......................................................... 28

Additional Information

Precautions......................................................... 29

Maintenance....................................................... 30

Dismounting the unit ....................................... 30

Specifications ..................................................... 31

Troubleshooting guide ..................................... 32

4

EN

S

E

K

/

A

M

S

MODE

OFF

SOUND

DSPL

PTY

LIST

OPEN

AF/TA

SOURCE

SHIFT

12345678910

TIR

XR-C8100R

Location of controls

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search) control

9, 11, 13, 16, 17, 22, 23, 25, 28

2 MODE (*)button

During tuner reception:

BAND select 10, 11

During tape reception:

Transport direction change 8, 9

During CD or MD playback:

CD/MD Unit select 21, 23, 24, 27

3 SOURCE (TAPE/TUNER/CD/MD) button

8, 10, 11, 21, 23, 27

4 Dial (volume/subwoofer volume/bass/

treble/left-right/rear-front control) 7, 26

5 SOUND button 20

6 DSPL (display mode change) button

11, 12, 21, 22, 26, 27

7 Display window

8 6 (eject) button (located on the front

side of the unit behind by the front

panel) 8

9 Reset button (located on the front side

of the unit behind by the front panel) 6

!º OPEN button 6, 8

!¡ PTY/LIST button

Disc Memo 26, 27

List-up 27

RDS Programme 17

!™ AF/TA button 13, 14, 15

!£ OFF button 6, 8

!¢ Receptor for the optional wireless

remote

!∞ SHIFT button

PLAY MODE 9, 10, 11, 13, 15, 22, 23, 24,

25, 28

REP 10, 23

SET UP 7, 18, 20, 21, 22

SHUF 23

!§ POWER SELECT switch (located on the

bottom of the unit)

See “POWER SELECT Switch” in the

Installation/Connections manual.

!¶ During radio reception:

Number buttons 11

During CD/MD playback:

Direct disc selection buttons 22

!• TIR button 15, 16

5

EN

Optional wireless

remote (RM-X47)

The buttons of the wireless remote

work the same functions as those on

this unit.

1 OFF button

2 SEEK/AMS button

3 (–) (+) buttons

4 ATT button

5 SOUND/SEL button

6 DSPL button

7 PRESET/DISC button

You cannot do manual search and manual

tuning with the remote.

8 SOURCE button

9 MODE/DIR button

(MODE) controls the same function on this

unit.

When the POWER SELECT switch is set to the B position, the unit cannot be operated with the

wireless remote unless (SOURCE) on the unit is pressed or a cassette is inserted to activate the

unit first.

OFF

SOURCE

DIR

SEL

+

FF

–

REW

SOUND

–

+

ATT DSPL

SEEK

AMS

PRESET

DISC

MODE

6

EN

Attaching the front panel

Plase the hole a in the front panel onto the

spidle b on the unit as illustrated, then push

the left side in.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel hard against the

unit when attaching it. Press it lightly against the

unit.

• Do not press hard or put excessive pressure on

the display windows of the front panel.

• Do not expose the front panel to direct sunlight,

heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight

where there may be a considerable rise in

temperature.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ballpoint pen.

Note

Pressing the reset button will erase the clock and

some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to

prevent the unit from being stolen.

1 Press (OFF).

2 Press (OPEN) to open up the front panel,

then slide the front panel to the right

side, and pull out the left side of the

front panel.

Notes

• Do not put anything on the inner surface of the

front panel.

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still on,

the power will turn off automatically to prevent

the speakers from being damaged.

• When you carry the front panel with you, put it

in the supplied front panel case.

Reset button

1

2

b

a

µ

7

EN

SOUND

LIST

MODE

SOUND

LIST

MODE

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds

(only when the POWER SELECT switch on the

bottom of the unit is set to the A position).

TIR indicator

If you pull out the ignition key while the TIR

function is on, the TIR indicator flashes a few

times. (only when the POWER SELECT switch

on the bottom of the unit is set to the A

position).

For more information on the TIR function,

refer to “Recording the traffic announcements”

(page 16).

Preparing the rotary

commander

When you mount the rotary commander,

attach the label in the illustration below.

Setting the clock

The clock uses a 24-hour digital indication.

Example: Set the clock to 10:08

1 Press (SHIFT), then press (3) (SET UP).

1 Press (5) (n).

The hour digit flashes.

2 Set the hour.

3 Press (5) (n).

The minute digits flash.

4 Set the minute.

2 Press (SHIFT).

The clock starts.

to go forward

to go backward

to go forward

to go backward

SET UP

continue to next page n

TIR indicator

Getting Started

8

EN

3 Press (SHIFT).

After the mode setting is complete, the

display goes back to normal playback

mode.

Note

If the POWER SELECT switch on the bottom of the

unit is set to the B position, turn the power on

first, then set the clock.

6

Cassette Player

Listening to a tape

1 Press (OPEN) and insert a cassette.

2 Close the front panel.

Playback starts automatically.

If a cassette is already inserted, press

(SOURCE) repeatedly until “FWD” or “REV”

appears to start playback.

The side facing up is being playback.

The side facing down is being playback.

Tips

• To change the tape transport direction, press

(MODE) (*).

• ”Metal” appears in the display when you insert a

metal or CrO

2 tape (Auto Metal function).

To Press

Stop playback (OFF)

Eject the cassette (OPEN) then 6

9

EN

Getting Started/Cassette Player

To locate

preceding tracks

To locate succeeding

tracks

Rewind

Fast-forward

Playing a tape in various

modes

You can play the tape in various modes:

•Intro (Intro Scan) lets you play the first 10

seconds of all the tracks.

•NR (Dolby NR) lets you select the Dolby* NR

B system.

•B. Skip (Blank Skip) skips blanks longer than

eight seconds.

•ATA (Automatic Tuner Activation) turns on

the tuner automatically while fast-winding

the tape.

•Repeat (Repeat Play) repeats the current

track.

* Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing

Corporation. ”DOLBY“ and the double-D

symbol a are trademarks of Dolby Laboratories

Licensing Corporation.

Searching for the desired track

— Intro scan

1 Press (SHIFT).

Every time you press (SHIFT), only the

items you can select light up.

2 Press (4) (PLAY MODE) repeatedly until

“Intro” appears.

Each time you press (4) (PLAY MODE),

the item changes as follows:

Intro n NR n B. Skip n ATA

3 Press (5) (n) to select “Intro on.”

Intro Scan starts.

4 Press (SHIFT).

To go back to normal playback mode, select

“Intro off” in step 3 above.

A

SHIFT

1234567891

0

SET UP PLAY MODE

REP

PLAY MODE

Fast-winding the tape

During playback, push the SEEK/AMS

control up or down and hold.

To start playback during fast-forwarding or

rewinding, press (MODE).

Locating a specific track

— Automatic Music Sensor (AMS)

You can skip up to nine tracks at one time.

During playback, push the SEEK/AMS

control up or down momentarily.

Note

The AMS function may not work when:

— the blancks between tracks are shorter than

four seconds

— there is noise between tracks

— there are long sections of low volume or quiet

sections.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

z Tape playback z Clock z Frequency*

1

MOTION DISPLAY*

2

Z

*

1

While the AF/TA function is activated.

*

2

All the items above are scrolled in the display

one by one in order.

10

EN

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 10

stations on each band (FM1, FM2, MW and

LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

TAPE ˜ TUNER

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

z FM1 z FM2 z MW z LW

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (n).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sound and the setting is stored.

5 Press (SHIFT).

Notes

• The unit does not store stations with weak

signals. If only a few stations are received, some

number buttons will retain heir former setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Playing tracks repeatedly

— Repeat Play

1 During playback, press (SHIFT).

2 Press (7) (REP) repeatedly until ”Repeat“

appears.

Repeat Play starts.

3 Press (SHIFT).

To go back to normal playback mode, select

“Repeat off” in step 2 above.

DSPL

A

SHIFT

1234567891

SET UP PLAY MODE

REP

11

EN

Memorising only the

desired stations

You can store up to 10 stations on each band

(20 for FM1 and FM2, 10 for each MW and

LW) in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band (FM1, FM2, MW or LW).

3 Push the SEEK/AMS control up or down

to tune in the station you want to store

on the number button.

4 Press and hold the desired number

button ((1) to (10)) until “MEM”

appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band (FM1, FM2, MW or LW).

3 Press the number button ((1) to (10))

momentarily where the desired station is

stored.

If you cannot tune in a preset

station

Push the SEEK/AMS control up or down

momentarily to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Cassette Player/Radio

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (4) (PLAY MODE) repeatedly

until “Local” (local seek mode) is displayed. Then

press (5) (n) to select “Local on.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to push the SEEK/AMS control up or down

and hold until the desired frequency appears

(manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “Mono” appears.

2 Press (5) (n) repeatedly until “Mono

on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (SHIFT).

To go back to normal mode, select “Mono off”

in step 2 above.

Changing the displayed items

Each time you press (DSPL), the item changes

as follows:

z Frequency (Station Name)*

1

zClock

MOTION DISPLAY*

2

Z

*

1

When you tune in an FM station that transmits

RDS data, the station name appears.

*

2

All the itmes above are scrolled in the display

one by one in order.

12

EN

Re-tuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and re-tunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to re-tune the

station manually.

1 Select an FM station.

2 Press (AF/TA) repeatedly until “AF on”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA off” appears.

102.5MHz

96.0MHz

98.5MHz

Frequencies change automatically.

Station

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: re-tuning the same programme

automatically, listening to traffic

announcements and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 10).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Changing the displayed item

Each time you press (DSPL), the item changes

as follows:

z Station Name/Frequency z Clock

MOTION DISPLAY* Z

* All the itmes above are scrolled in the display

one by one in order.

Note

“NO Name” appears if the received station does

not transmit RDS data.

13

EN

Local link function (United

Kingdom only)

The Local Link function lets you select other

local stations in the area, even though they are

not stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Changing the displayed item

Each time you press (AF/TA), the item changes

as follows:

” AF on ” TA on ” AF TA on*

AF TA off “

* Select this to turn on both the AF and TA

functions.

Notes

• “NO AF” and the station name flash alternately,

if the unit cannot find an alternative station in

the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Push

the SEEK/AMS control up or down while the

station name is flashing (within eight seconds).

The unit starts searching for another frequency

with the same PI (Programme Identification) data

(“PI seek” appears and no sound is heard). If the

unit cannot find another frequency, “NO PI”

appears, and the unit returns to the originally

selected frequency.

Listening to a regional programme

The “REG on” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG on,” but if

you want to turn off the function, do the

following.

1 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “REG” appears.

2 Press (5) (n) repeatedly until “REG off”

appears.

3 Press (SHIFT).

Note that selecting “REG off” might cause

the unit to switch to another regional

station within the same network.

To go back to regional on, select “REG on” in

step 2 above.

Note

This function does not work in the United

Kingdom and in some other areas.

RDS

14

EN

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

”TA“ appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will automatically switch to the

announcement. If you are listening to a source

other than the radio, the emergency

announcements will be heard if you set AF or

TA to on. The unit will then automatically

switch to these announcements no matter what

you are listening to at the time.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even though you are

listening to other programme sources.

Press (AF/TA) repeatedly until “TA on” or

“AF TA on” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

• “NO TP” flashes for five seconds if the received

station does not broadcast traffic

announcements. Then, the unit starts searching

for a station that broadcasts traffic

announcements.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcements by other stations in the same

network.

To cancel the current traffic

announcement

Press (AF/TA) or (SOURCE) momentarily.

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until “AF

TA off” appears.

15

EN

Recording the traffic

announcements

—Traffic Information Replay (TIR)

You can listen to the latest traffic

announcements by recording them. The unit

automatically records and stores up to eight

traffic announcements. If the recording

exceeds four minutes, the recorded

announcements are updated, so you can

always hear the latest information.

The TIR function turns on the unit

automatically and records the traffic

announcements for up to two hours before and

after a preset time.

Presetting the time and the station

1 Press and hold (TIR) until “TIR” lights up

in the display.

2 Press (5) (n) repeatedly until “TIR on”

appears.

3 Press (TIR) repeatedly until the time

indication appears.

1 Set the hour by rotating the dial.

2 Press (5) (n) until the minute digits

flash.

3 Set the minute by rotating the dial.

4 Press (TIR).

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset station, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 10).

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

Note that selecting “AF TA off” stores not

only RDS stations, but also non-RDS

stations.

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (n) until “B.T.M” flashes.

5 Press (SHIFT).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

3 Press the desired number button and

hold until “MEM” appears.

Repeat from step 1 for presetting other

stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

RDS

continue to next page n

16

EN

Playing back the recorded traffic

announcements

When there are recorded traffic

announcements you have not listened to yet,

t flashes.

1 Press (TIR).

The latest traffic announcement is played

back. To listen to the previous ones, press

(TIR) or push the SEEK/AMS control up.

To replay the announcements, push the

SEEK/AMS control down.

“NO Data” appears if no traffic

announcements were recorded.

2 Press (TIR) to go back to the original

programme.

5 Select the desired station by pressing the

preset number button or pushing the

SEEK/AMS control up or down.

6 Press (TIR) for two seconds to return to

the original display.

t lights up.

The unit turns on automatically and stands

by for traffic announcements for four hours

(two hours before and after the preset

time).

If the preset station does not broadcast the

traffic announcement while searching, the

unit starts searching for other traffic

programme (TP) stations.

To cancel the TIR function

Select “TIR off” in step 2 above.

Tips

• While the unit is recording the traffic

announcement, t and “TA” flash.

• If the unit still cannot find a TP station, it starts a

new search every five minutes until it finds one.

• If you pull out the ignition key while the TIR

function is on, "TIR on" and t flash a few times.

Notes

• The unit also stands by for traffic

announcements for two hours after you turn off

the engine, as long as the TIR function is on.

• If you have a power aerial, it automatically

extends every time the unit searches for a traffic

programme station.

If you have a manual aerial, make sure that the

aerial is fully extended.

• If you do not use your car for about ten days, the

TIR function will turn off automatically to avoid

battery wear, even if the TIR function is on.

8

17

EN

1 Press (PTY/LIST) during FM reception

until “PTY” appears.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

2 Press (PTY/LIST) repeatedly until the

desired programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “None” (Not specified) for

searching.

3 Push the SEEK/AMS control up or down.

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previous station.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Note

If you are in a country or region where EON data is

not transmitted, you can use this function only for

the stations you have tuned in once.

Programme types Display

News News

Current Affairs Affairs

Information Info

Sports Sport

Education Educate

Drama Drama

Culture Culture

Science Science

Varied Varied

Popular Music Pop M

Rock Music Rock M

Middle of the Road Music M. o. R. M

Light Classical Light M

Classical Classics

Other Music Type Other M

Weather Weather

Finance Finance

Children’s programmes Children

Social Affairs Social A

Religion Religion

Phone In Phone In

Travel Travel

Leisure Leisure

Jazz Music Jazz

Country Music Country

National Music Nation M

Oldies Music Oldies

Folk Music Folk M

Documentary Document

Not specified None

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

RDS

18

EN

Other Functions

Using the rotary

commander

The rotary commander works by pressing

buttons and/or rotating controls.

You can control an optional CD or MD unit

with the rotary commander.

By pressing buttons (the SOURCE

and MODE buttons)

Each time you press (SOURCE), the

source changes as follows:

TAPE n TUNER n CD n MD

Pressing (MODE) changes the operation

in the following ways;

• Tape transport direction

• Tuner : FM1 n FM2 n MW n LW

• CD unit : CD1 n CD2 n …

• MD unit : MD1 n MD2 n …

Tip

When the POWER SELECT switch is set to position

B, you can turn on this unit by pressing (SOURCE)

on the rotary commander.

(SOURCE)

(MODE)

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

1 Press (SHIFT), then press (3) (SET UP)

repeatedly until “CT” appears.

2 Press (5) (n) repeatedly until “CT on”

appears.

The clock is set.

3 Press (SHIFT) to return to the normal

display.

To cancel the CT function

Select “CT off” in step 2 above.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

SET UP

19

EN

Changing the operative direction

The operative direction of controls is factory-

set as in the illustration below.

If you need to mount the rotary commander on

the right side of the steering column, you can

reverse the operative direction.

Press (SOUND) for two seconds while

pushing the VOL control.

Tip

You can control the operative direction of controls

with the unit (page 20).

Press (SOUND) to

adjust the volume

and sound menu.

To increase

To decrease

Press (LIST) to:

• Display the memorised names.

• Display the programme type.

By rotating the control (the SEEK/

AMS control)

Rotate the control momentarily and

release it to:

•Locate the beginnings of the tracks on the

tape. Rotate and hold the control, and

release it to fast-wind the tape. To

playback, rotate and hold the control

again, and release it.

•Locate a specific track on a disc. Rotate

and hold the control until you lacate the

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and

hold the control to tune in a specific

station.

By pushing in and rotating the

control (the PRESET/DISC control)

Push in and rotate the control to:

•Receive the stations memorised on the

number buttons.

•Change the disc.

Other operations

Rotate the VOL control to

adjust the volume.

Press (ATT) to

attenuate the

sound.

Press (OFF) to turn

off the unit.

RDS/Other Functions

OFF

20

EN

Adjusting the sound

characteristics

You can adjust the bass, treble, balance and

fader.

Each source can store the bass and treble levels

respectively.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

VOL (volume) n SUB (subwoofer volume)

n BAS (bass) n TRE (treble)

n BAL (left-right) n FAD (front-rear)

2 Adjust the selected item by rotating the

dial.

Adjust within three seconds after selecting

the item. (After three seconds, the dial

functions as the volume control.)

Attenuating the sound

Press (ATT) on the rotary commander or

wireless remote.

“ATT on” flashes momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

The unit decreases the volume automatically when

a telephone call comes in (Telephone ATT

function).

Changing the sound and

display settings

You can set:

•Clock (page 7).

•CT (Clock Time) (page 18).

•D.Info (Dual Information) to display the

clock and the play mode at the same time

(ON) or to display the information

alternately (OFF).

•Amber/Green to change the illumination

colour to amber or green.

•Dimmer to change the brightness of the

display.

— Select “Auto” to dim the display only

when you turn the lights on.

— Select “on” to dim the display.

•Contrast to adjust the contrast if the

indications in the display are not

recognizable because of the unit‘s installed

position.

•Voice guide function for vocalized comments.

•Beep to turn on or off the beeps.

•RM (Rotary Commander) to change the

operative direction of the controls of the

rotary commander.

— Select “norm” to use the rotary

commander as the factory-set position.

— Select “rev” when you mount the rotary

commander on the right side of the

steering column.

•Loud (Loudness) to enjoy bass and treble

even at low volume. The bass and treble will

be reinforced.

•LPF (Low Pass Filter).

•A. Scrl (Auto Scroll) (page 22).

1 Press (SHIFT).

2 Press (3) (SET UP) repeatedly until the

desired item appears.

Each time you press (3) (SET UP), the item

changes as follows:

Clock n CT n D.Info* n Amber/Green n

Dimmer n Contrast n Voice* n Beep n RM

n Loud* n LPF* n A.Scrl*

* When the radio is off, or when there is no

tape, CD, or MD being played, these items

will not appears

Note

The displayed item will differ depending on

the source.

Sidan laddas ...

Sony XR-C8100RW Användarmanual

Denna manual är också lämplig för

Sony XR-C8100RW Användarmanual

på andra språk

Relaterade papper

Andra dokument