Sony MDX-C8970R Användarmanual

 1999 by Sony Corporation

FM/MW/LW

MiniDisc Player

MDX-C8970R

Operating Instructions

Manual de instrucciones

Manual de instruções

Bruksanvisning

GB

ES

PT

SE

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

MDX-C8970R

2

Welcome !

Thank you for purchasing this Sony MiniDisc

Player. This unit lets you enjoy a variety of

features by using either a supplied rotary

commander or an optional wireless remote.

In addition to the MD playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit with a connected

optional CD unit compatible with the CD

TEXT function, the CD TEXT information will

appear in the display when you play back a

CD TEXT disc*

2

.

*

1

You can also connect a CD changer or an MD

changer.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

You can select for the display language and

vocalised comments of the voice guide in

either English or Spanish.

Voice Drive

Sony has developed a new function which

contributes to safer driving.

In addition to our unique rotary commander,

we now introduce a voice sensitive operating

system Voice Drive which gives the driver

voice control of the car audio.

Now, while keeping your eyes on the road,

you can command operations with Voice Drive

and confirm results with Voice Guide.

And you can also record your voice with the

voice memo function. It will take a note for

you when you see or think of something while

you are driving.

Voice guide for safe driving

This unit has a voice guide function*. When

the voice guide function is on, the unit gives

vocalised comments on functions

corresponding to the relevant button pushed.

These comments can be vocalised in either

English or Spanish.

* Some optional power amplifiers may cause a

break at the beginning of vocalised comments.

When you connect an optional MD changer, the

sound from the first MD may continue for a short

time even after the vocalised comments about

the second MD are announced.

3

Table of Contents

This Unit Only

With Optional Equipment

Notes on MDs ........................................................... 4

Location of controls .................................................. 5

Getting Started

Resetting the unit ................................................. 7

Detaching the front panel ................................... 7

Preparing the rotary commander ...................... 8

Setting the clock ................................................... 8

MD Player

Listening to an MD .............................................. 9

Playing an MD in various modes .................... 11

Creating a programme

— MD Programme Memory ....................... 12

Radio

Memorising stations automatically

— Best Tuning Memory (BTM)................... 14

Memorising only the desired stations............. 15

Receiving the memorised stations ................... 15

RDS

Overview of the RDS function ......................... 16

Displaying the station name............................. 16

Re-tuning the same programme automatically

— Alternative Frequencies (AF) ................. 17

Listening to traffic announcements ................. 18

Presetting the RDS stations with the AF and

TA data ........................................................... 19

Recording the traffic announcements

—Traffic Information Replay (TIR) ............ 20

Locating a station by programme type ........... 21

Setting the clock automatically ........................ 22

Voice Drive

Selecting a “V Drive” box for registration...... 23

Registering a vocal phrase ................................ 23

Requesting a registered source ........................ 24

Voice Memo

Recording a voice memo................................... 25

Playing back the voice memo ........................... 25

Erasing the voice memo .................................... 26

DSP

Setting the equalizer .......................................... 26

Selecting the listening position ........................ 27

Selecting a soundstage menu

— Dynamic Soundstage Organizer

(DSO) ......................................................... 28

Adjusting the balance (BAL) ............................ 29

Adjusting the fader (FAD) ................................ 29

Adjusting the volume of the subwoofer(s)..... 30

Listening to each program source in its

registered DSO

— Source Sound Memory (SSM) ................ 31

Other Functions

Using the rotary commander ........................... 31

Attenuating the sound ...................................... 33

Changing the sound and display settings ...... 33

Changing the equalizer display ....................... 34

CD/MD Unit

Playing a CD or MD .......................................... 34

Playing tracks repeatedly

— Repeat Play ............................................... 36

Playing tracks in random order

— Shuffle Play ............................................... 36

Creating a programme

— Programme Memory (CD/MD unit with

the programme memory function) ....... 36

Labelling a CD

— Disc Memo (CD unit with the custom

file function) ............................................. 39

Locating a disc by name

— List-up (CD unit with the custom file

function or MD unit) ............................... 40

Selecting specific tracks for playback

— Bank (CD unit with the custom file

function).................................................... 41

Additional Information

Precautions.......................................................... 42

Maintenance........................................................ 42

Dismounting the unit ........................................ 43

Specifications ...................................................... 44

Troubleshooting guide ...................................... 45

4

Notes on MDs

Since an MD itself is housed in a cartridge, free

from accidental contact with your fingers and

dust, etc. it can withstand a certain degree of

the rough handling. However, dirt or dust on

the surface of the cartridge or a warped

cartridge may cause a malfunction, observe the

following.

Never touch the surface of the MD itself by

deliberately opening the shutter on the

cartridge.

Do not expose the MD to direct sunlight or

heat sources such as hot air-ducts. Do not leave

it in a car parked in the direct sunlight where

there can be a considerable rise in temperature.

Make sure that it is not left on the dashboard

or rear tray of a car, etc. where the temperature

can also be excessive.

Notes on mounting labels

Be sure to mount labels on cartridges correctly,

as failing to do so may cause an MD to become

stuck in the unit.

•Mount the label in a suitable position.

•Remove old labels before putting new ones

on.

•Replace labels that are beginning to peel

away from the MD.

Note on using MDs

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio and MDs.

Sugary residues spilt on this unit or on the

MDs may contaminate the unit and MDs,

reduce the sound quality, or prevent sound

reproduction altogether.

Cleaning

Wipe the surface of the MD cartridge from

time to time with a soft dry cloth.

5

Location of controls

Refer to the pages for details.

1 SEEK/AMS (seek/Automatic Music

Sensor/manual search/voice drive/voice

memo select) control 10, 12, 13, 15, 20,

21, 22, 23, 25, 35, 36, 38, 41

2 MODE (band/unit select) button

14, 15, 34, 36, 40

3 SOURCE (TUNER/MD/CD) button

9, 14, 15, 18, 26, 27, 28, 29, 30, 34, 36, 40

4 Z (eject) button (located on the front

side of the unit behind by the front

panel) 9

5 Dial (volume/DSO level/equalizer level/

listening position/front or rear speaker

volume/subwoofer volume/balance)

8, 19, 20, 25, 26, 27, 28, 29, 30, 31, 39, 40

Dial usually functions as a volume control

except in some adjusting modes.

6 SOUND button 26, 27, 28, 29, 30, 31

7 DSPL/SA (display mode/spectrum

analyzer change) button

10, 16, 17, 34, 35, 39, 40

8 Display window

9 Reset button (located on the front side

of the unit behind by the front panel) 7

0 OPEN button 7, 9, 43

qa PTY/LIST button

Disc Memo 39, 40

List-up 40

RDS Programme 22

qs AF/TA button 17, 18, 19

qd OFF button* 7, 9

qf Sensor for the optional wireless remote

qg SHIFT button

PLAY MODE 12, 13, 14, 15, 18, 19, 36,

37, 38, 41

REP 11, 36

SET UP 8, 10, 22, 33, 35

SHUF 11, 36

qh During radio reception:

Number buttons 15, 18, 19

During CD/MD playback:

Direct disc selection buttons 35, 36

qj TIR button 20, 21

* Warning when installing in a car

without ACC (accessory) position

on the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turned off the engine.

When you press (OFF) momentarily, the

clock display does not turn off and this

causes battery wear.

S

E

K

/

A

M

S

MODE

OFF

SOUND

DSPL

PTY

LIST

OPEN

AF/TA

SOURCE

SHIFT

12345678910

TIR

MDX-C8970R

SA

6

Optional wireless

remote (RM-X47)

The buttons of the wireless remote

have the same functions as those on

the unit.

1 OFF button

2 SEEK/AMS button

3 buttons

4 ATT button

5 SOUND/SEL button

6 DSPL button

7 PRESET/DISC button

You cannot do manual search and manual

tuning with the remote.

8 SOURCE button

9 MODE/DIR button

OFF

SOURCE

DIR

SEL

+

FF

–

REW

SOUND

–

+

ATT DSPL

SEEK

AMS

PRESET

DISC

MODE

Location of controls

7

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ballpoint pen.

Reset button

Notes

• Pressing the reset button will erase the clock and

some memorised functions.

• When you connect the power supply cord to the

unit or reset the unit, wait for about 10 seconds

before you insert a disc. If you insert a disc within

these 10 seconds, the unit will not be reset, and

you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN) to open up the front panel,

then slide the front panel to the right

side, and pull out from the left side of

the front panel.

1

2

Notes

• Do not place anything on the inner surface of

the front panel.

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still on,

the power will be turned off automatically to

prevent the speakers from being damaged.

• When you carry the front panel with you, put it

in the supplied front panel case.

Attaching the front panel

Place the hole in the front panel onto the

spindle on the unit as illustrated, then push

the left side in.

x

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel hard against the

unit when attaching it. Press it lightly against the

unit.

• Do not press hard or put excessive pressure on

the display windows of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight

where there may be a considerable rise in

temperature.

8

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

TIR indicator

If you pull out the ignition key while the TIR

function is on, the TIR indicator flashes a few

times.

TIR indicator

For more information on the TIR function,

refer to “Recording the traffic announcements”

(page 20).

Preparing the rotary

commander

When you mount the rotary commander,

attach the labels as shown in the illustration

below.

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (SHIFT), then press (3) (SET UP).

1 Press (5) (t).

The hour digit flashes.

2 Set the hour.

3 Press (5) (t).

The minute digits flash.

4 Set the minute.

to go forward

to go backward

to go forward

to go backward

9

MD Player

Listening to an MD

1 Press (OPEN) and insert the MD.

Playback starts automatically.

Labelled side up

2 Close the front panel.

If an MD is already inserted, press (SOURCE)

repeatedly until “MD” appears.

The title of the MD* and the track title will be

displayed on the display window, then the

playing time will appear.

Elapsed playing time

Track number

* Only if these titles are prerecorded on the MD.

When the last track on the MD is

over

the track number indication will return to “1,”

and the playback will restart from the first

track of the MD.

To Press

Stop playback (OFF)

Eject the MD (OPEN) then Z

2 Press (SHIFT).

The clock starts.

3 Press (SHIFT).

After the mode setting is complete, the

display returns to normal playback mode.

Z

10

Changing the display item

Each time you press (DSPL/SA), the item

changes as follows:

V

Track number/

Elapsed playback time

V

Disc name*

1

V

Track name*

2

V

Clock

*

1

If there is no prerecorded title for a disc “NO

D.Name” will appear on the display.

*

2

If a track title is not prerecorded, “NO T.Name”

will be displayed.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tips

• If the name of the MD is too long, you can scroll

it across the display window by pressing (SHIFT),

then press (2) (T) while the disc name or track

name is displayed.

• The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 33.)

Automatically scrolling a disc name

— Auto Scroll

If the disc name or track name on an MD

exceeds 10 characters and the Auto Scroll

function is on, the following automatically

scrolls on the display:

• The disc name appears when the disc has

changed (if the disc name is selected).

• The track name appears when the track has

changed (if the track name is selected).

• The disc or track name appears depending on

the setting when you press (SOURCE) to select

an MD.

If you press (DSPL/SA) to change the display

item, the disc or track name of the MD is

scrolled automatically whether you set the

function on or off.

1 During playback, press (SHIFT).

2 Press (3) (SET UP) repeatedly until

“A.Scrl” appears.

3 Press (5) (t) to select “A.Scrl on.”

4 Press (SHIFT).

To cancel Auto Scroll, select “A.Scrl off” in

step 3 above.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down momentarily.

Locating a specific point in a track

— Manual Search

During playback, push the SEEK/AMS

control up or down and hold. Release

when you have found the desired point.

Note

If “

” or “ ” appears in the display, it

means you have reached the beginning or the end

of the disc and you cannot go any further.

To search forward

To locate succeeding

tracks

To locate preceding

tracks

To search backward

11

Playing an MD in various

modes

You can play MDs in various modes:

•Repeat (Repeat Play) repeats the current

track.

•Shuf (Shuffle Play) plays all the tracks in

random order.

Playing tracks repeatedly

— Repeat Play

1 During playback, press (SHIFT).

2 Press (7) (REP) repeatedly until ”Repeat

1“ appears.

Repeat Play starts.

3 Press (SHIFT).

To return to the normal playback mode, select

“Repeat off” in step 2 above.

Playing tracks in random order

— Shuffle Play

1 During playback, press (SHIFT).

2 Press (8) (SHUF) repeatedly until

”Shuf 1“ appears.

Shuffle Play starts.

3 Press (SHIFT).

To return to the normal playback mode, select

“Shuf off” in step 2 above.

SHIFT

1234567891

SET UP PLAY MODE

REP SHUF

SHIFT

123456789

SET UP PLAY MODE

REP SHUF

12

Creating a programme

— MD Programme Memory

You can play the tracks in any order you want

by making your own programmes. You can

select up to 24 tracks for a programme. You

can store the programmes in memory.

1 During MD playback, press (SHIFT), then

press (4) (PLAY MODE) for two seconds.

2 Push the SEEK/AMS control up or down

to select the track you want.

3 Press (6) (ENTER) momentarily.

x

4 To continue entering tracks, repeat steps

2 and 3.

5 When you finish selecting tracks, press

(4) (PLAY MODE) for two seconds.

6 Press (SHIFT).

Notes

• “*Wait*” appears in the display while the unit is

reading the data.

• “*Mem Full*” appears in the display when you

try to enter more than 24 tracks into a

programme.

Playing the stored programme

1 Press (SHIFT).

2 Press (4) (PLAY MODE) repeatedly until

“PGM” appears.

3 Press (5) (t) repeatedly until “PGM on”

appears.

Programme Play starts.

4 Press (SHIFT).

To return to the normal playback mode, select

“PGM off” in step 3 above.

Notes

• “No data” appears in the display if no track is

stored in the programme.

• ”Not ready” appears in the display if a disc that

has no programmed tracks is inserted.

13

Erasing an entire programme

1 Press (SHIFT), then press (4) (PLAY

MODE) for two seconds.

2 Press (2) (T) repeatedly until “DEL”

appears.

3 Press (6) (ENTER) for two seconds.

The entire programme is erased.

4 When you finish erasing programmes,

press (4) (PLAY MODE) for two seconds.

5 Press (SHIFT).

Adding tracks to a programme

1 Press (SHIFT), then press (4) (PLAY

MODE) for two seconds.

2 Press (2) (T) or (5) (t) to select the

track slot number where you want to

insert a track.

Track slot number

3 Push the SEEK/AMS control up or down

to select the track you want to insert.

4 Press (6) (ENTER) momentarily to enter

the track.

The current track is inserted in that slot

number and the succeeding tracks shift

down.

5 To continue inserting tracks, repeat steps

2 through 4.

Note

Once all 24 slots have been filled, “*Mem

Full*” appears in the display, and you cannot

insert more tracks.

6 When you finish inserting tracks, press

(4) (PLAY MODE) for two seconds.

7 Press (SHIFT).

14

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 10

stations on each band (FM1, FM2, MW, and

LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

MD y TUNER

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

B FM1 B FM2 B MW B LW

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (t).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

5 Press (SHIFT).

Notes

• The unit does not store stations with weak

signals. If only a few stations are received, some

number buttons will retain their former setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Erasing tracks in a programme

1 Press (SHIFT), then press (4) (PLAY

MODE) for two seconds.

2 Press (2) (T) or (5) (t) to select the

track you want to erase.

Track slot number

The track currently registered in slot 6.

3 Press (6) (ENTER) for two seconds.

When you erase a track from a slot number,

the succeeding tracks shift up to fill the gap.

x

4 To continue erasing tracks, repeat steps

2 and 3.

5 When you finish erasing tracks, press (4)

(PLAY MODE) for two seconds.

6 Press (SHIFT).

15

Memorising only the

desired stations

You can preset up to 20 FM stations (10 for

FM1 and 10 for FM2), and up to 10 MW

stations, and up to 10 LW stations in the order

of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band (FM1, FM2, MW, or LW).

3 Push the SEEK/AMS control up or down

to tune in the station you want to store

on the number button.

4 Press and hold the desired number

button ((1) to (10)) until “MEM”

appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band (FM1, FM2, MW, or LW).

3 Press the number button ((1) to (10))

momentarily where the desired station is

stored.

If you cannot tune in a preset

station

Push the SEEK/AMS control up or down

momentarily to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (4) (PLAY MODE) repeatedly

until “Local” (local seek mode) is displayed. Then

press (5) (t) to select “Local on.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to, push the SEEK/AMS control up or

down and hold until the desired frequency

appears (manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “Mono” appears.

2 Press (5) (t) repeatedly until “Mono

on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (SHIFT).

To return to the normal mode, select “Mono

off” in step 2 above.

16

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: re-tuning the same programme

automatically, listening to traffic

announcements and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 15).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Changing the display item

Each time you press (DSPL/SA), the item

changes as follows:

Frequency y Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 33.)

17

102.5MHz

96.0MHz

98.5MHz

Frequencies change automatically.

Station

Changing the display item

Each time you press (DSPL/SA), the item

changes as follows:

Frequency (Station Name) y Clock

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 33.)

Note

“NO Name” appears if the received station does

not transmit RDS data.

Re-tuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and re-tunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to re-tune the

station manually.

1 Select an FM station (page 15).

2 Press (AF/TA) repeatedly until “AF on”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA off” appears.

Changing the display item

Each time you press (AF/TA), the item changes

as follows:

B AF on B TA on B AF TA on*

AF TA off b

* Select this to turn on both the AF and TA

functions.

Notes

• “NO AF” and the station name flash alternately,

if the unit cannot find an alternative station in

the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Push

the SEEK/AMS control up or down while the

station name is flashing (within eight seconds).

The unit starts searching for another frequency

with the same PI (Programme Identification) data

(“PI seek” appears and no sound is heard). If the

unit cannot find another frequency, “NO PI”

appears, and the unit returns to the originally

selected frequency.

18

Listening to a regional programme

The “REG on” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG on,” but if

you want to turn off the function, do the

following.

1 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “REG” appears.

2 Press (5) (t) repeatedly until “REG off”

appears.

3 Press (SHIFT).

Note that selecting “REG off” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG on” in

step 2 above.

Note

This function does not work in the United

Kingdom and in some other areas.

Local link function (United

Kingdom only)

The Local Link function lets you select other

local stations in the area, even if they are not

stored on your number buttons.

1 Press a number button ((1) to (10)) that

has a local station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even though you are

listening to other programme sources.

Press (AF/TA) repeatedly until “TA on” or

“AF TA on” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

returns to the original source when the

announcement is over.

Notes

• “NO TP” flashes for five seconds if the received

station does not broadcast traffic

announcements. Then, the unit starts searching

for a station that broadcasts traffic

announcements.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcements by other stations in the same

network.

• While the unit is receiving the traffic

announcements, the voice drive function and

voice memo function do not work.

To cancel the current traffic

announcement

Press (AF/TA) or (SOURCE) momentarily.

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until “AF

TA off” appears.

19

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

”TA“ appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will automatically switch to the

announcement. If you are listening to a source

other than the radio, the emergency

announcements will be heard if you set AF or

TA to on. The unit will then automatically

switch to these announcements no matter what

you are listening to at the time.

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset station, or

the same setting for all preset stations.

Presetting the same setting for all

preset stations

1 Select an FM band (page 15).

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

Note that selecting “AF TA off” stores not

only RDS stations, but also non-RDS

stations.

3 Press (SHIFT), then press (4) (PLAY

MODE) repeatedly until “B.T.M” appears.

4 Press (5) (t) until “B.T.M” flashes.

5 Press (SHIFT).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF/TA) repeatedly to select either

“AF on,” “TA on” or “AF TA on” (for both

AF and TA functions).

3 Press and hold the desired number

button ((1) to (10)) until “MEM”

appears.

Repeat from step 1 for presetting other

stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

20

Recording the traffic

announcements

—Traffic Information Replay (TIR)

You can listen to the latest traffic

announcements by recording them. The unit

automatically records and stores up to eight

traffic announcements. If the recording

exceeds eight minutes, the recorded

announcements are updated, so you can

always hear the latest information.

The TIR function turns on the unit

automatically and records the traffic

announcements for up to two hours before and

after a preset time.

Presetting the time and the station

1 Press and hold (TIR) until “TIR” lights up

in the display.

2 Press (5) (t) repeatedly until “TIR on”

appears.

3 Press (TIR) repeatedly until the time

indication appears.

1 Set the hour by rotating the dial.

2 Press (5) (t) until the minute digits

flash.

3 Set the minute by rotating the dial.

4 Press (TIR).

5 Select the desired station by pressing the

preset number button or pushing the

SEEK/AMS control up or down.

6 Press (TIR) for two seconds to return to

the original display.

c lights up.

345

The unit turns on automatically and stands

by for traffic announcements for four hours

(two hours before and after the preset

time).

If the preset station does not broadcast the

traffic announcement while searching, the

unit starts searching for other traffic

programme (TP) stations.

To cancel the TIR function

Select “TIR off” in step 2 above.

Tips

• While the unit is recording the traffic

announcement, c and “TA” flash.

• If the unit still cannot find a TP station, it starts a

new search every five minutes until it finds one.

• If you pull out the ignition key while the TIR

function is on, “TIR on” and c flash a few times.

Sidan laddas...

Sony MDX-C8970R Användarmanual

Sony MDX-C8970R Användarmanual

på andra språk

Relaterade papper

Andra dokument