Kenwood FDM791 MultiPro Classic Bruksanvisning

instructions

istruzioni

instrucciones

Bedienungsanleitungen

gebruiksaanwijzing

TYPE FDM78

TYPE FDM79

Type FDM79

Type FDM78

English 3 - 14

Nederlands 15 - 28

Français 29 - 41

Deutsch 42 - 55

Italiano 56 - 69

Dansk 70 - 81

Svenska 82 - 93

Norsk 94 - 105

Suomi 106 - 117

1.5 L

max

6

5

4

2

1

9

8

bo

bn

bk

7

bm

bl

3

TYPE FDM79

1

2

4

6

3

5

cl

bp

cm

cp

cq

cr

cn

co

cs

ct

dk

dl

dm

bq

bs

bt

ck

br

A - standard attachments

B - optional attachments

dn

do

dp

dq

cm

+

cn

co

+

dl

cq dk

cp dm do

bk

9

bl

cq

7

8

bn

bm

bp

bo

bq

br

co

cp

dn

dq

dp

bt

bs

cn

cl

cm

ck

safety

●

Read these instructions carefully and retain for future reference.

●

Remove all packaging and any labels.

●

The blades and discs are very sharp, handle with care. Always hold by

the finger grip at the top, away from the cutting edge, both

when handling and cleaning.

●

Do not lift or carry the processor by the handle - or the handle may break

resulting in injury.

●

Always remove the knife blade before pouring contents from the bowl.

●

Keep hands and utensils out of the processor bowl and blender goblet

whilst connected to the power supply.

●

Switch off and unplug:-

●●

before fitting or removing parts;

●●

when not in use;

●●

before cleaning.

●

Never use your fingers to push food down the feed tube. Always use the

pusher/s supplied.

●

Never fit the blade unit to the power unit without the blender

goblet or compact chopper/grinder fitted.

●

Before removing the lid from the bowl or blender or compact

chopper/grinder from the power unit:-

●●

switch off;

●●

wait until the attachment/blades have completely stopped;

●●

be careful not to unscrew the blender goblet or compact

chopper/grinder from the blade assembly.

●

SCALD RISK: Hot ingredients should be allowed to cool to room

temperature before blending.

●

Do not use the lid to operate the processor, always use the on/off speed

control.

●

This appliance will be damaged and may cause injury if the

interlock mechanism is subjected to excessive force.

●

Always unplug your food processor when not in use.

●

Never use an unauthorised attachment.

●

Never leave the appliance unattended when it is operating.

●

Never use a damaged appliance. Get it checked or repaired: see ‘service

& customer care’.

●

Never let the power unit, cord or plug get wet.

●

Don’t let excess cord hang over the edge of a table or worktop or touch

hot surfaces.

●

Do not exceed the maximum capacities stated in the recommended

speed chart.

3

●

Children should be supervised to ensure that they do not play with the

appliance.

●

This appliance shall not be used by children. Keep the appliance and its

cord out of reach of children.

●

Appliances can be used by persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe

way and if they understand the hazards involved.

●

Only use the appliance for its intended domestic use. Kenwood will not

accept any liability if the appliance is subject to improper use, or failure to

comply with these instructions.

●

Misuse of your processor/blender can result in injury.

●

The maximum rating is based on the attachment that draws the greatest

load. Other attachments may draw less power.

Refer to the relevant section under “using the attachments” for additional

safety warnings for each individual attachment.

blender safety

●

SCALD RISK: Hot ingredients should be allowed to cool to room

temperature before blending.

●

Always take care when handling the blade assembly and avoid touching

the cutting edge of the blades when cleaning.

●

Only operate the blender with the lid in place.

●

Only use the goblet with the blade assembly supplied.

●

Never run the blender empty.

●

To ensure the long life of your blender, do not run it for longer than 60

seconds.

●

Smoothie recipes - never blend frozen ingredients that have formed a solid

mass during freezing, break it up before adding to the goblet.

●

Never blend more than the max level - 1.5 litres (53 fl oz).

4

5

IMPORTANT: HOT

BLENDING INSTRUCTIONS

To minimise the possibility of scalding when blending hot ingredients keep

hands and other exposed skin away from the lid to prevent possible burns.

The following precautions must be observed:

●

CAUTION: Blending very hot ingredients may result in hot

liquid and steam being forced suddenly past the lid or filler

cap

bp

.

●

We recommend that hot ingredients are allowed to cool

before blending.

●

NEVER exceed 1200mls/5 cups capacity if processing hot liquids, such

as soups (refer to the markings on the goblet).

●

ALWAYS commence blending at a low speed and gradually increase

the speed. NEVER blend hot liquids by using the Pulse setting.

●

Liquids which tend to foam such as milk, should be limited to a

maximum capacity of 1000mls/4 cups.

●

Take care when handling the blender as the goblet and its contents will

be very hot.

●

Take particular care when removing the lid. The lid is designed to be a

tight fit to prevent leakage. If necessary protect your hands with a cloth

or oven gloves when handling.

●

Ensure the goblet is securely attached to the base and when removing

from the appliance, guide the base and ensure it is removed together

with the goblet.

●

Ensure that the lid and filler cap are securely in place before every

blending operation.

●

Always ensure that the vents in the filler cap are clear before every

blending operation

cl

.

●

When fitting the lid to the goblet always ensure that the lid and goblet

rim are clean and dry to ensure a good seal and prevent spillage.

slicing/grating disc safety

●

Never remove the lid until the cutting disc has completely

stopped.

●

Handle the cutting discs with care - they are extremely

sharp.

●

Do not overfill the bowl – do not exceed the maximum

capacity level marked on the bowl.

mini bowl and knife safety

●

Never remove the lid until the knife blade has completely stopped.

●

The knife blade is very sharp - always handle with care.

compact chopper/grinder safety

●

Never fit the blade unit to your food processor without the jar fitted.

●

Never unscrew the jar while the compact chopper/grinder is fitted to your

appliance.

●

Do not touch the sharp blades – Keep the blade unit away from children.

●

Never remove the compact chopper/grinder until the blades have

completely stopped.

●

To ensure the long life of your compact chopper/grinder, do not run it

continuously for longer than 60 seconds. Switch off as soon as you have

got the right consistency.

●

The appliance will not work if the compact chopper/grinder is incorrectly

fitted.

●

Do not process turmeric root in the compact chopper/grinder as it is too

hard and may damage the blades.

juice extractor safety

●

Do not use the juice extractor if the filter is damaged.

●

Only use the pusher supplied. Never put your fingers in the feed tube.

Unplug before unblocking the feed tube.

●

Before removing the lid, switch off and wait for the filter to stop.

●

Never use a damaged attachment.

6

b

efore plugging in

●

Make sure your electricity supply is the same as the one

s

hown on the underside of your appliance.

W

ARNING: THIS APPLIANCE MUST BE EARTHED.

●

T

his appliance conforms to EC directive 2004/108/EC on

Electromagnetic Compatibility and EC regulation no.

1

935/2004 of 27/10/2004 on materials intended for contact

w

ith food.

before using for the first time

1 Remove the plastic blade covers from the knife blade. Take

c

are the blades are very sharp. These covers should

be discarded as they are to protect the blade during

manufacture and transit only.

2

Wash the parts see ‘care & cleaning’

key

processor

1

power unit

2

bowl with drive shaft

3

detachable drive shaft

4

lid

5

feed tube

6

pushers

7

safety interlocks

8

speed/pulse control

9

power on light

bk

cord storage (at back)

weighing function (TYPE FDM79)

bl

kg/lb button

bm

on/zero button

bn

display screen

bo

weighing tray

thermoresist blender

bp

filler cap

bq

lid

br

goblet

bs

sealing ring

bt

blade unit

ck

base

cl

filler cap vents

A - standard attachments

cm

knife blade

cn

dough tool

co

dual whisk

cp

max capacity disc

cq

4mm slicing disc

cr

2mm slicing disc

B - optional attachments

Not all the attachments listed below will be included with your

f

ood processor model. Attachments are dependent upon the

m

odel variant. For more information or to order additional

attachments refer to the “service and customer care” section.

cs

e

xtra fine grater disc (if supplied)

ct

fine Julienne disc (if supplied)

dk

French fry disc (if supplied)

dl

f

olding tool (if supplied)

dm

mini bowl and blade (if supplied)

dn

grinding mill (if supplied)

do

c

itrus juicer (if supplied)

dp

metal juicer extractor (if supplied)

dq

attachment storage box (if supplied)

to use your food processor

1 Fit the bowl to the power unit. Place the handle towards the

right hand side and turn forward

1

until it locks.

2 Fit an attachment over the bowl drive shaft.

Note: Detachable drive shaft

2

should be fitted

when using the discs, mini bowl, whisk, folding

tool and citrus juicer.

●

Always fit the bowl and attachment onto the processor

before adding ingredients.

3 Fit the lid ensuring the top of the drive shaft/tool locates into

the centre of the lid

3

.

●

The processor will not operate if the bowl or lid

are not fitted correctly into the interlock. Check

that the feed tube and bowl handle are situated

to the right hand side.

4 Plug in. The Power On light will come on. Select one of the

following options: -

Speed Control – manually select the required speed (refer to

the recommended speed chart).

Pulse – use the pulse (P) for short bursts. The pulse will

operate for as long as the control is held in position.

5 At the end of processing turn the speed control to the ‘OFF’

position (Align the speed control with the power on light

9

).

●

Always switch off and unplug before removing the

lid.

important

●

Your processor is not suitable for crushing or grinding coffee

beans, or converting granulated sugar to caster sugar.

7

weighing function (TYPE FDM79 only)

Y

our food processor is fitted with a built in weighing function

to allow ingredients to be weighed straight into the bowl or

b

lender goblet.

●

T

he Maximum weighing capacity is 3Kg. This is the total

weight of all the ingredients including the weight of the bowl

o

r goblet.

to use the weighing function

1 Always fit the bowl, detachable drive shaft and attachment

or blender goblet onto the power unit before adding

i

ngredients.

2 Plug in – the display screen will

remain blank.

3

Press the ON/ZERO button once

and the display screen will light

up.

4 Press the (kg/lb) button to select

either grams or ounces. The

display will default to kg/g when

first switched on.

●

The unit weighs in 1g increments

and teaspoon/tablespoon

measures are recommended for

weighing small quantities.

5 Check the display shows ‘0’, if not, zero by pressing the

ON/ZERO button. Then weigh the required ingredients

straight into the bowl or goblet. After the weight is displayed,

press the ON/ZERO button and the display will return to ‘0’.

Add the next ingredients and that weight will be displayed.

Repeat until all ingredients are weighed.

●

If the display is not zeroed and either the ingredients or the

bowl/attachment/lid are removed the display will show

[ - - - -] to represent a minus reading.

To zero press the ON/ZERO button once.

6 Add the lid and select a speed to operate the processor.

●

During operation the display screen will freeze [- - - -] until

the speed control returned to the ‘OFF’ position.

●

After processing the last weight will be displayed on the

screen when the speed control is returned to the ‘OFF’

position. Note: The weight of the lid will be included if the

display is not zeroed before switching on.

●

The weight of any additional ingredients added down the

feed tube whilst the processor is running will not be shown

on the display screen.

bo

weighing tray

A removable weighing tray is

supplied for weighing

ingredients without the bowl or

blender.

To use, place the tray on top of

the power unit. Then follow

steps 2 to 5 under ‘to use the

weighing function’.

To remove, just lift the tray off.

auto switch off

●

The display screen will turn off automatically if the same

weight reading is shown after 5 minutes.

●

The display screen can be turned off manually by pressing

and holding down the ON/ZERO button for a few seconds.

i

mportant

●

Do not overload by exceeding the maximum weighing

c

apacity of 3Kg. The display will show [0 – Ld] if the

weighing function is overloaded.

●

D

o not subject the power unit to excessive force as this may

damage the weighing sensor.

●

A

lways place the processor on a dry flat surface prior to

w

eighing.

●

Do not move the power unit during operation of the

w

eighing function.

to use your thermoresist blender

1

Fit the sealing ring

bs

i

nto the blade unit

bt

-

ensuring the

seal is located correctly in the grooved area.

●

Leaking will occur if the seal is damaged or

i

ncorrectly fitted.

2

Clip the blade unit

bt

i

nto the base

ck

.

3 Screw the blade assembly onto the goblet - ensuring the

blade assembly is fully tightened

4

. Refer to the graphics

on the underside of the blade unit as follows:

- unlocked position

- locked position

The blender will not work if incorrectly

assembled.

4 Put your ingredients into the goblet.

5 Fit the lid to the goblet and push down to secure

5

. Fit the

filler cap.

6 Place the blender onto the power unit, and turn clockwise

6

to lock.

●

The appliance will not operate if the blender is

incorrectly fitted to the interlock.

7 Select a speed (refer to the recommended speed chart) or

use the pulse control.

hints

●

When making mayonnaise, put all the ingredients, except

the oil, into the blender. Remove the filler cap. Then, with the

appliance running, add the oil slowly through the hole in the

lid.

●

Thick mixtures, e.g. pâtés and dips, may need scraping

down. If the mixture is difficult to process, add more liquid.

●

Ice crushing - operate the pulse in short bursts until crushed to

the desired consistency.

●

The processing of spices is not recommended as they may

damage the plastic parts.

●

The appliance will not work if the blender is incorrectly fitted.

●

To blend dry ingredients - cut into pieces, remove the filler

cap, then with the appliance running, drop the pieces down

one by one. Keep your hand over the opening. For best

results empty regularly.

●

Don’t use the blender as a storage container. Keep it empty

before and after use.

●

Never blend more than 1.5 litres (53 fl oz) - less for frothy

liquids like milkshakes.

8

recommended speed chart

tool/attachment function recommended processing maximum

s

peed time

❋

c

apacities

K

nife blade All in one cake mixes 8 15-20 secs 1.5Kg/3lb 5oz

f

lour weight

P

astry - rubbing fat into flour 5 –8 10 secs 340g/12oz

flour weight

A

dding water to combine pastry ingredients 10-20 secs

C

hopping fish and lean meat Pulse –8 10-30 secs 600g/1lb 6oz

P

âtés and terrines max lean beef

Chopping vegetables Pulse 5-10 secs 500g/1lb 2oz

Chopping nuts 8 30-60 secs 200g/8oz

Pureeing soft fruit, cooked fruit and vegetables 8 10-30 secs 1Kg/2lb 4oz

Sauces, dressing and dips 8 2 mins max 800g/1lb 8oz

Knife blade with Cold soups Start at low 30-60 secs 1.5 litres/53 fl oz

m

ax capacity disc speed and

Milkshakes/batters increase to 15-30 secs 1 litres/2pts

maximum

Dual whisk Egg whites 8 60-90 secs 6 (200g)

Egg & sugar for fatless sponges 8 4-5 min 3 (150g)

Cream 8 30 secs 500 ml/1pt

Creaming fat and sugar 8 2 mins max 200g/8oz fat

200g/8oz sugar

Dough tool Yeasted mixes 8 60 secs 1Kg/ 2lb 4oz total wt

White Bread Flour 8 60 secs 600g/1lb 6oz flour wt

Wholemeal Bread Flour 8 60 secs 500g/1lb 2oz flour wt

Folding tool Whipping cream and fruit purees 1 –2 60 secs 300g/12oz cream,

300g/12oz puree

Egg whites into heavy mixtures 1 –2 60 secs 600g/1lb 6oz total wt

Macaroons 1 –2 60 secs 500g/1lb 2oz total wt

Extra fine grater Parmesan cheese, potatoes for German 8–

potato dumplings

Fine Julienne disc Potato straws and rosti 8–

Stir fries and vegetable garnishes

French fry disc Cuts potatoes for thin French Fries and 8–

ingredients for casseroles and dips

(eg cucumber, apple and pear.)

Thermoresist blender Cold liquids and drinks 8 15-30 secs 1.5 litres/53 fl oz

Stock based soups 8 30 secs 1.2 litres/42 fl oz

Soups using milk 8 30 secs 1 litres/2pt

We recommend that hot ingredients are allowed to cool before blending. However should you wish to process

hot ingredients please read the Hot Blending Safety instructions.

Mini bowl and knife Meat 8 20 secs + Pulse 200g/8oz Lean beef

Chopping herbs 8 30 secs 15g/

1

⁄2oz

Chopping nuts 8 30 secs 50g/2oz

Mayonnaise 8 30 secs 2 Eggs

300g/12oz Oil

Purees 8 30 secs 200g/8oz

Citrus Juicer Smaller items i.e. limes and lemons 1 –2 – 1Kg/2lb 4oz

Larger fruits i.e. oranges and grapefruits

Metal juice extractor Juicing fruit and vegetables ie apples and 8–800g/1lb 14oz apples

carrots 600g/1lb 6oz carrots

Juicing soft fruits ie grapes and tomatoes 8–500g/1lb 2oz

Grinding mill Processing a range of spices 8 30-60 secs 50g/2oz

Grinding coffee beans 8 30 secs

Chopping nuts Pulse 10 secs 50g/2oz

Processing garlic cloves, fresh chillies and root Pulse 10 secs 30g/1oz

ginger

❋❋

This is for guidance only and will vary depending on the exact recipe and ingredients being processed.

Do not fill above

the maximum capacity

marked on the bowl

9

using the attachments

R

efer to recommended speed chart for each attachment.

cm

knife blade

The knife blade is the most versatile of all the attachments.

T

he length of the processing time will determine the texture

achieved. For coarser textures use the pulse control.

Use the knife blade for cake and pastry making, chopping

r

aw and cooked meat, vegetables, nuts, pâté, dips,

pureeing soups and to also make crumbs from biscuits and

bread.

h

ints

●

C

ut food such as meat, bread, vegetables into cubes

approximately 2cm/3/4in before processing.

●

B

iscuits should be broken into pieces and added down the

feed tube whilst the appliance is running.

●

When making pastry use fat straight from the fridge cut into

2cm/3/4in.cubes.

●

Take care not to over-process.

cn

dough tool

Use for yeasted dough mixes.

●

Place the dry ingredients in the bowl and add the liquid

down the feed tube whilst the appliance is running. Process

until a smooth elastic ball of dough is formed this will take

approx. 60 secs.

●

Re-knead by hand only. Re-kneading in the bowl is not

recommended as it may cause the processor to become

unstable.

co

dual whisk

Use for light mixtures such as egg whites, cream,

evaporated milk and for whisking eggs and sugar for fatless

sponges.

using the whisk

1 Fit the bowl onto the power unit, add the detachable drive

shaft.

2 Push each beater

7

securely into the drive head.

3 Fit the whisk by carefully turning until it drops over the drive

shaft.

4 Add the ingredients.

5 Fit the lid - ensuring the end of the shaft locates into the

centre of the lid.

6 Switch on.

important

●

The whisk is not suitable for making all in one

cake mixes as these mixes are too heavy and will

damage it. Always use the knife blade.

hints

●

Best results are obtained when the eggs are at room

temperature.

●

Ensure the bowl and whisks are clean and free from grease

before whisking.

c

reaming fat and sugar

●

For best results fat should be allowed to soften at room

temperature (20°C) before creaming. DO NOT use fat

s

traight from the fridge as this will damage the

whisk.

●

Heavier ingredients such as flour and dried fruit should be

f

olded in by hand.

●

Do not exceed the maximum capacity or processing time

stated in the recommended speed chart.

cp

max capacity disc

W

hen blending liquids in the bowl, the max capacity disc

must be used with the knife blade. It prevents leaking and

i

mproves the chopping performance of the blade.

1

Fit the bowl onto the power unit.

2 Fit the knife blade.

3 Add ingredients to be processed.

4 Fit the capacity disc over the top of the blade ensuring it sits

on the ledge inside the bowl

bk

. Do not push down on

the capacity disc.

5 Fit the lid and switch on.

slicing/grating discs

reversible slicing/grating discs - 4mm

cq

, 2mm

cr

Use the grating side for cheese, carrots, potatoes and foods

of a similar texture.

Use the slicing side for cheese, carrots, potatoes, cabbage,

cucumber, courgette, beetroot and onions.

extra fine grater disc

cs

Grates Parmesan cheese and potatoes for German potato

dumplings.

fine julienne

ct

Use to cut potatoes into straws and coarse grate for rosti,

stir fries and vegetable garnishes.

French fry disc

dk

Cuts potatoes for thin French Fries and ingredients for

casseroles and dips (eg cucumber, apple and pear.)

safety

●

Never remove the lid until the cutting disc has

completely stopped.

●

Handle the cutting discs with care - they are

extremely sharp.

●

Do not overfill the bowl – do not exceed the

maximum capacity level marked on the bowl.

to use the cutting discs

1 Fit the bowl onto the power unit, add the detachable drive

shaft.

2 Holding by the centre grip, place the disc onto the drive shaft

with the appropriate side uppermost

bl

.

3 Fit the lid.

4 Put the food in the feed tube.

Choose which size feed tube you want to use. The pusher

contains a smaller feed tube for processing individual items

or thin ingredients.

To use the small feed tube - first put the large pusher inside

the feed tube.

To use the large feed tube - use both pushers together.

10

5

Switch on and push down evenly with the pusher - never

put your fingers in the feed tube.

hints

●

Use fresh ingredients

●

D

on’t cut food too small. Fill the width of the feed tube fairly

full. This prevents the food from slipping sideways during

processing. Alternatively use the small feed tube.

●

W

hen using the Julienne or French fry disc, place ingredients

horizontally.

●

When slicing or grating: food placed upright

bm

comes out

s

horter than food placed horizontally

bn

.

●

There will always be a small amount of waste on the disc or

in the bowl after processing.

dl

folding tool

U

se the folding tool to fold light ingredients into heavier

mixtures for example meringues, mousses and fruit fools.

1 Fit the bowl onto the power unit, add the detachable drive

shaft.

2 Push the paddle

8

securely into the drive head.

3 Fit the folding tool by carefully turning until it drops over the

drive shaft.

4 Add the ingredients.

5 Fit the lid – ensuring the end of the shaft locates into the

centre of the lid .

6 Select low speed (speed 1 -2).

to remove the beater

Detach the beater from the drive head by pressing the

release button

9

.

hints

●

Do not use high speed as a low speed is required to

optimise the folding performance.

●

For best results do not over whisk egg whites or cream –

the folding tool will not be able to fold the mixture correctly if

the whisked mix is too firm.

●

Do not fold the mixture for longer than stated in the

recommended speed chart as the air will be knocked out

and the mix will be too loose.

●

Any unmixed ingredients left on the paddle or sides of the

bowl should be carefully folded in using the spatula.

dm

mini bowl and knife

Use the mini processor bowl to chop herbs and process

small quantities of ingredients e.g. meat, onion, nuts,

mayonnaise, vegetables, purées, sauces and baby food.

mini blade

mini bowl

to use the mini bowl and knife

1 Fit the bowl onto the power unit, add the detachable drive

shaft.

2 Fit the mini bowl over the detachable drive shaft - ensure the

cut out sections align with the locating tabs

bo

on the main

bowl.

Note: The main bowl lid cannot be fitted if the mini bowl is

not located correctly.

3 Place the knife blade over the drive shaft

bp

.

4 Add the ingredients to be processed.

5 Fit the lid and switch on.

s

afety

●

Never remove the lid until the knife blade has completely

stopped.

●

T

he knife blade is very sharp - always handle with care.

i

mportant

●

Do not process spices – they may damage the plastic.

●

Do not process hard food such as coffee beans, ice cubes

o

r chocolate – they may damage the blade.

h

ints

●

Herbs are best chopped when clean and dry.

●

A

lways add a little liquid when blending cooked ingredients

t

o make baby food.

●

Cut foods such as meat, bread, vegetables into cubes

a

pproximately 1-2 cm (

1

⁄2 –

3

⁄4 i

n) before processing.

●

W

hen making mayonnaise add the oil down the feed tube.

dn

grinding mill (If supplied)

Use the grinding mill for processing dry ingredients such as

nuts or coffee beans and for grinding spices such as:-

Black peppercorns, cardamom seeds, cumin seeds,

coriander seeds, fennel seeds, fresh ginger root, garlic

cloves and fresh chillies.

mill jar

grinding mill blade assembly

to use your grinding mill

1 Place your ingredients into the blade assembly .

2 Fit the jar and turn clockwise to lock

bq

.

3 Place the mill onto the power unit and turn clockwise to

lock

br

.

4 Select a speed or use the pulse (P).

safety

●

Never fit the blade unit to your food processor without the

jar fitted.

●

Never unscrew the jar while the mill is fitted to your

appliance.

●

Do not touch the sharp blades – Keep the blade unit away

from children.

●

Never remove the mill until the blades have completely

stopped.

●

To ensure the long life of your mill, do not run it continuously

for longer than 60 seconds. Switch off as soon as you have

got the right consistency.

●

The appliance will not work if the mill is incorrectly fitted.

●

Do not process turmeric root in the mill as it is too hard and

may damage the blades.

hints

●

For optimum performance when processing spices we

recommend that you do not process more than 50g at a

time in the mill.

●

Whole spices retain their flavour for a much longer time than

ground spices so it is best to grind a small quantity fresh at

a time to retain the flavour.

●

To release the maximum flavour and essential oils whole

spices are best roasted prior to milling.

●

Cut ginger up into small pieces before processing.

●

For best results the mini bowl attachment is recommended

when chopping herbs.

11

do

citrus juicer

Use the citrus juicer to squeeze the juice from citrus fruits

(

eg oranges, lemons, limes and grapefruits).

cone

sieve

to use the citrus juicer

1

Fit the bowl onto the power unit, add the detachable drive

s

haft.

2 Fit the sieve into the bowl - ensuring the sieve handle is

l

ocked into position directly over the bowl handle

bs

.

3

Place the cone over the drive shaft turning until it drops all

the way down

bt

.

4

Cut the fruit in half. Then switch on and press the fruit onto

t

he cone.

●

The citrus juicer will not operate if the sieve is

not locked correctly.

●

For best results store and juice the fruit at room temperature

and hand roll on a worktop before juicing.

●

To help with juice extraction move the fruit from side to side

when juicing.

●

When juicing large quantities, empty the strainer regularly to

prevent the build up of pulp and seeds.

dp

metal juice extractor

Use the centrifugal juicer for making juice from firm fruit and

vegetables.

safety

●

Do not use the juice extractor if the filter is

damaged.

●

Only use the pusher supplied. Never put your fingers in the

feed tube. Unplug before unblocking the feed tube.

●

Before removing the lid, switch off and wait for the filter to

stop.

●

Never use a damaged attachment.

pusher

lid

pulp remover

filter drum

to use the juice extractor

1 Fit the bowl to the power unit

ck

.

2 Place the pulp remover into the filter drum - ensuring the

tabs locate with the slots in the bottom of the drum

cl

.

3 Fit the filter drum

cm

.

4 Place the attachment lid onto the bowl, turn until it locks and

the feed tube sits over the handle

cn

. Your juice

extractor will not operate if the bowl or lid are

not fitted correctly into the interlock.

5 Cut the food to fit the feed tube.

6 Switch on and push down evenly with the pusher - never

put your fingers in the feed tube. Process fully before

adding more.

●

After adding the last piece, let the juice extractor run for a

further 30 seconds to extract all the juice from the filter

drum.

i

mportant

●

If the juice extractor starts to vibrate, switch off and empty

the pulp from the drum. (The juice extractor vibrates if the

p

ulp becomes unevenly distributed).

●

Maximum capacity that can be processed at one time is

800g of fruit or vegetables (refer to speed chart).

●

S

ome very hard foods may make your juice extractor slow

down or stop. If this happens switch off and unblock the

filter.

●

S

witch off and clear the pulp collector regularly during use.

h

ints

●

Before processing remove stones and pips (eg pepper,

melon, plum) and tough skins (eg melon, pineapple). You

d

on’t need to peel or core apples and pears.

●

Use firm, fresh fruit and vegetables.

●

To maximise juice extraction place small quantities at a time

i

n the feed tube and push down slowly.

●

Citrus fruit - peel and remove the white pith, otherwise the

juice may taste bitter. For best results use the citrus juicer.

dq

attachment storage box

Your food processor is supplied with a storage box for your

discs.

1 Fit the discs into the storage box when not in use

co

.

2 The storage box is fitted with a safety lock - close the lid to

lock. To open lift up the lid

cp

.

care & cleaning

●

Always switch off and unplug before cleaning.

●

Handle the blades and cutting discs with care -

they are extremely sharp.

●

Some foods may discolour the plastic. This is perfectly

normal and won’t harm the plastic or affect the flavour of

your food. Rub with a cloth dipped in vegetable oil to

remove the discolouration.

power unit

●

Wipe with a damp cloth, then dry. Ensure that the interlock

area is clear of food debris.

●

Don’t immerse the power unit in water.

●

Store excess cord in the storage area at the back of the

power unit

cq

.

blender

1 Empty the goblet, unscrew the blade unit by turning to the

unlock position to release. Then remove the blade unit by

pushing up from underneath.

●

Care should be taken when removing the blade unit from the

base.

2 Wash the goblet by hand.

3 Remove and wash the seal.

4 Don’t touch the sharp blades – brush them clean using hot

soapy water, then rinse thoroughly under the tap. Don’t

immerse the blade unit in water.

5 Leave to dry upside down.

dual whisk

●

Detach the beaters from the drive head by gently pulling

them free. Wash in warm soapy water.

●

Wipe the drive head with a damp cloth, then dry. Do not

immerse the drive head in water.

12

g

rinding mill

●

Remove the blade assembly from the jar by turning in an

anti-clockwise direction.

●

W

ash the jar by hand.

●

Don’t touch the sharp blades – brush them clean using hot

soapy water, then rinse thoroughly under the tap. Don’t

i

mmerse the blade unit in water.

●

Leave to dry upside down.

folding tool

●

Detach the beater from the drive head by pressing the

r

elease button

9

.

Wash in warm soapy water.

●

Wipe the drive head with a damp cloth, then dry. Do not

immerse the drive head in water.

f

ilter drum

●

T

he cutting blades on the base of the filter drum are very

sharp, take care when handling and cleaning the drum.

all other parts

●

Wash by hand, then dry.

●

Alternatively they are dishwasher safe and can be washed

on the top rack of your dishwasher. Avoid placing items on

the bottom rack directly over the heating element. A short

low temperature (Maximum 50°C) programme is

recommended.

service & customer care

●

If the cord is damaged it must, for safety reasons, be

replaced by KENWOOD or an authorised KENWOOD

repairer.

●

If you experience any problems with the

operation of the processor, before calling for

assistance refer to the troubleshooting guide.

If you need help with:

●

using your appliance or

●

servicing or repairs

●

Contact the shop where you purchased your appliance.

●

Designed and engineered by Kenwood in the UK.

●

Made in China.

I

MPORTANT INFORMATION FOR CORRECT

DISPOSAL OF THE PRODUCT IN ACCORDANCE

WITH EC DIRECTIVE 2002/96/EC.

A

t the end of its working life, the product must not be disposed

of as urban waste.

It must be taken to a special local authority differentiated waste

c

ollection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible

n

egative consequences for the environment and health deriving

from inappropriate disposal and enables the constituent

materials to be recovered to obtain significant savings in energy

and resources. As a reminder of the need to dispose of

household appliances separately, the product is marked with a

crossed-out wheeled dustbin.

13

item suitable for

dishwashing

main bowl, mini bowl, lid, pusher ✔

knife blades, dough tool ✔

detachable drive shaft ✔

discs ✔

max capacity disc ✔

whisk beaters/folding tool paddle ✔

Do not immerse the drive head in water

blender goblet, lid, filler cap ✔

blade unit and seal for blender ✘

metal juice extractor ✔

grinding mill blade assembly ✘

grinding mill jar ✔

spatula

✔

14

troubleshooting guide

P

roblem Cause Solution

The processor will not operate. No Power. Check processor is plugged in.

N

o power/indicator light not lit.

B

owl not fitted to power unit correctly. Check bowl is located correctly

and the handle is situated

t

owards the right hand side.

B

owl lid not locked on correctly. Check that the lid interlock is

located correctly into the

handle area.

T

he processor will not

w

ork if the bowl and lid

a

re fitted incorrectly.

Compact chopper/grinder will not operate. Compact chopper/grinder not locked on correctly. The compact chopper/grinder will

n

ot operate if fitted incorrectly to

the interlock.

Compact chopper/grinder not assembled correctly. Check blade unit is fully tightened

onto the compact chopper/grinder

jar.

Blender will not operate. Blender not locked on correctly. The blender will not operate if

fitted incorrectly to the

interlock.

Blender not assembled correctly. Check blade unit is fully

tightened into the goblet.

Processor stops or slows Overload protection operated. Switch off, unplug and allow

during processing. Processor overloaded or overheated during the appliance to cool down for

operation. approximately 15 minutes.

Maximum capacity exceeded. Refer to the speed chart for

maximum capacities to

process.

Weighing function

Display screen freezes on [- - - -]. Quantity weighed too small. Use teaspoon and tablespoon

measures for very small

quantities.

Weight changed on display screen. Power unit moved during operation. Do not move unit during use.

Zero the display before

weighing next ingredients.

Blender leaking from blade assembly base. Seal missing. Check seal is fitted correctly

Seal incorrectly fitted. and not damaged. To obtain a

Seal damaged. replacement seal see “service &

customer care”.

Blender seal missing from blade unit when The seal is packed pre-fitted to the blade unit. Unscrew goblet and check that

removed from packaging. seal is fitted to blade unit.

To obtain a replacement seal

see “service & customer care”.

Poor performance of tools/attachments. Refer to hints in relevant “using the attachment” section. Check attachments are

assembled correctly.

veiligheid

●

Lees deze instructies zorgvuldig door en bewaar ze voor toekomstig

gebruik.

●

Verwijder alle verpakking en labels.

●

De messen en de schijven zijn erg scherp; ga er dus voorzichtig mee om.

Houd ze bij het hanteren en schoonmaken altijd bovenaan bij

de vingergreep en weg van het snijvlak, vast.

●

Til de keukenmachine niet bij het handvat op en draag hem evenmin op

die manier; hierdoor kan het handvat afbreken, waardoor u letsel kunt

oplopen.

●

Voordat u de inhoud uit de kom giet, dient u altijd eerst het mes te

verwijderen.

●

Houd uw handen en keukengereedschap uit de kom van de

keukenmachine en de beker van de blender, wanneer deze op het lichtnet

is aangesloten.

●

Schakel het apparaat uit en haal de stekker uit het stopcontact:-

●●

voordat u onderdelen aanbrengt of verwijdert;

●●

als u het apparaat niet gebruikt;

●●

voor het reinigen.

●

Gebruik nooit uw vingers om voedsel in de invoerkoker te duwen. Gebruik

altijd de bijgeleverde stamper.

●

Zet het mes nooit op het motorblok zonder dat de beker van

de blender of het compacte hak/molenhulpstuk is bevestigd.

●

Voordat u het deksel van de kom haalt of de blender of het compacte

hak/molenhulpstuk van het motorblok verwijdert:-

●●

zet het apparaat uit;

●●

wacht totdat de hulpstukken / messen helemaal tot stilstand zijn

gekomen;

●●

zorg dat u de blenderbeker of het compacte hak/molenhulpstuk niet

losschroeft van de messeneenheid.

●

VERBRANDINGSGEVAAR: Laat hete ingrediënten eerst tot

kamertemperatuur afkoelen voordat u ze in de blender verwerkt.

●

Gebruik nooit het deksel om de keukenmachine te bedienen, maar altijd de

aan/uit-knop.

●

Als teveel kracht wordt uitgeoefend op het

vergrendelingsmechanisme, wordt dit apparaat beschadigd

en kan het letsel veroorzaken.

●

Haal de stekker altijd uit de keukenmachine wanneer u hem

niet gebruikt.

●

Gebruik nooit een niet bij het apparaat behorend hulpstuk.

●

Laat het apparaat nooit onbeheerd terwijl het aan staat.

15

Nederlands

V

ouw voor het lezen a.u.b. de voorpagina met illustraties uit

●

Gebruik nooit een beschadigd apparaat. Laat het nakijken of repareren: zie

Onderhoud en klantenservice.

●

Laat het motorhuis, het netsnoer of de stekker nooit nat worden.

●

Laat het snoer nooit over de rand van een tafel of werkblad hangen of in

aanraking komen met hete oppervlakken.

●

U mag de maximum capaciteit die in de snelheidstabel wordt aangegeven,

niet overschrijden.

●

Op kinderen moet toezicht gehouden worden om er zeker van te zijn dat

ze niet met het apparaat spelen.

●

Dit apparaat mag niet door kinderen worden gebruikt. Houd het apparaat

en het snoer buiten het bereik van kinderen.

●

Dit apparaat kan worden gebruikt door personen met verminderde

lichamelijke, sensorische of geestelijke capaciteiten of gebrek aan ervaring

en kennis mits ze onder toezicht staan of instructie hebben gekregen over

het veilig gebruik van het apparaat en de betrokken risico's begrijpen.

●

Gebruik het apparaat alleen voor het huishoudelijke gebruik waarvoor het

is bedoeld. Kenwood kan niet aansprakelijk worden gesteld in het geval

dat het apparaat niet correct is gebruikt, of waar deze instructies niet

worden opgevolgd.

●

Misbruik van uw keukenmachine/blender kan tot letsel leiden.

●

Het maximum vermogen is afhankelijk van het hulpstuk dat de grootste

hoeveelheid energie verbruikt. Andere hulpstukken verbruiken misschien

minder energie.

Raadpleeg de betreffende paragraaf onder De hulpstukken gebruiken voor

aanvullende veiligheidswaarschuwingen voor ieder hulpstuk afzonderlijk.

veiligheid m.b.t. de blender

●

VERBRANDINGSGEVAAR: Laat hete ingrediënten eerst tot

kamertemperatuur afkoelen voordat u ze in de blender verwerkt.

●

Wees voorzichtig wanneer u de messen hanteert en raak het snijvlak van

de messen bij het reinigen niet aan.

●

Laat de blender uitsluitend voorzien van deksel lopen.

●

Gebruik de kan uitsluitend met de bijgeleverde messen.

●

De blender nooit leeg gebruiken.

●

Om een lange levensduur van uw blender te garanderen, mag u hem nooit

langer dan 60 seconden gebruiken.

●

Smoothie-recepten – verwerk nooit bevroren ingrediënten die tijdens de

bevriezing tot een vaste massa gevormd zijn; breek de massa op voor u

hem aan de kan toevoegt.

●

Meng nooit meer dan het maximum niveau - 1,5 liter.

16

17

BELANGRIJK: INSTRUCTIES VOOR HET

MENGEN VAN HETE VLOEISTOFFEN

Om de kans op brandwonden te verkleinen bij het mengen van hete

ingrediënten, moet u uw handen en andere onbeschermde huid uit de

buurt van het deksel houden om eventuele brandwonden te voorkomen.

De volgende voorzorgsmaatregelen moeten worden getroffen:

●

VOORZICHTIG: Het mengen van zeer hete ingrediënten kan

tot gevolg hebben dat hete vloeistof en stoom plotseling uit

het deksel of de vuldop worden gedreven

bp

.

●

We raden u aan hete ingrediënten te laten afkoelen voordat

ze worden verwerkt.

●

Overschrijd bij de verwerking van hete vloeistoffen, zoals soepen,

NOOIT de capaciteit van 1200 ml (gebruik de maatstreepjes op de

beker).

●

Stel de blender in het begin ALTIJD op een lage snelheid in en verhoog

de snelheid geleidelijk. Meng hete vloeistoffen NOOIT door de

pulseerstand te gebruiken.

●

Vloeistoffen die de neiging hebben om te schuimen, zoals melk, mogen

de maximumcapaciteit van 1000 ml niet overschrijden.

●

Wees voorzichtig als u de blender vastpakt: de beker en de inhoud zijn

erg heet.

●

Wees vooral voorzichtig als u het deksel verwijdert. Om lekken te

voorkomen is het deksel zo ontworpen dat het precies past. Bescherm

bij de hantering zo nodig uw handen met een doek of ovenwanten.

●

Zorg dat de beker goed op het onderstel is bevestigd; wanneer u de

beker van het apparaat verwijdert, houdt u het onderstel vast en zorgt

dat hij samen met de beker wordt verwijderd.

●

Zorg dat het deksel en de vuldop altijd goed op hun plaats zitten

voordat u de blender inschakelt.

●

Zorg altijd dat de luchtopeningen in de vuldop vrij zijn voordat u de

blender inschakelt

cl

.

●

Zorg er bij het plaatsen van het deksel altijd voor dat het deksel en de

rand van de beker schoon en droog zijn, zodat een goede afsluiting kan

worden verkregen en morsen kan worden voorkomen.

veiligheid m.b.t. de snij/raspschijf

●

Verwijder het deksel nooit voordat de schijf helemaal tot

stilstand is gekomen.

●

Wees voorzichtig met de snijschijven – ze zijn heel erg

scherp

●

Vul de kom niet te ver - overschrijdt de maximum capaciteit

die op de kom wordt aangegeven niet.

veiligheid m.b.t. de minikom en het mes

●

Haal het deksel er nooit af voordat het meslemmet helemaal tot stilstand is

gekomen.

●

Het meslemmet is zeer scherp – ga er altijd voorzichtig mee om.

veiligheid m.b.t. het compacte hak/molenhulpstuk

●

Breng nooit de messeneenheid op het apparaat aan zonder dat de beker

is aangebracht.

●

Schroef de beker nooit los terwijl het compacte hak/molenhulpstuk op uw

keukenmachine bevestigd is.

●

Raak de scherpe messen niet aan. Houd de messeneenheid uit de buurt

van kinderen.

●

Verwijder het compacte hak/molenhulpstuk pas als de messen volledig tot

stilstand zijn gekomen.

●

Om een lange levensduur van uw compacte hak/molenhulpstuk te

garanderen, mag u hem nooit langer dan 60 seconden achtereen

gebruiken. Schakel het apparaat uit zodra u de juiste consistentie hebt

verkregen.

●

Het apparaat werkt niet als het compacte hak/molenhulpstuk onjuist is

bevestigd.

●

Verwerk geen geelwortel (kurkuma) in het compacte hak/molenhulpstuk;

dit is te hard en kan de messen beschadigen.

veiligheid m.b.t. de sapcentrifuge

●

De sapcentrifuge niet gebruiken als het filter beschadigd is.

●

Gebruik alleen de meegeleverde stamper. Steek uw vingers nooit in de

toevoerbuis. Haal de stekker uit het stopcontact voordat u de vulopening

deblokkeert.

●

Voordat u het deksel verwijdert, schakelt u de machine uit en wacht u

totdat het filter is gestopt.

●

Gebruik nooit een beschadigd hulpstuk.

18

Sidan laddas ...

Kenwood FDM791 MultiPro Classic Bruksanvisning

Kenwood FDM791 MultiPro Classic Bruksanvisning

på andra språk

Relaterade papper

Andra dokument