Sage SJB815 Användarguide

the 3X Bluicer Pro™

SJB815

EN USER GUIDE

DK BETJENINGSVEJLEDNING

SE INSTRUKTIONSBOK

NO INSTRUKSJONSBOK

FI OHJEKIRJA

2

SAGE®

RECOMMENDS

SAFETY FIRST

At Sage® we are very safety

conscious. We design and

manufacture consumer

products with the safety of

you, our valued customer,

foremost in mind. In addition

we ask that you exercise

a degree of care when using

any electrical appliance

and adhere to the following

precautions.

IMPORTANT

SAFEGUARDS

READ ALL INSTRUCTIONS

BEFORE USE AND SAVE FOR

FUTURE REFERENCE

• Before using the rst time ensure

your electricity supply is the

same as shown on the label on

the underside of the appliance.

This appliance is equipped with

a power cord having a grounding

wire with a grounding plug.

The appliance must be grounded

using a properly grounded outlet.

In the event of an electrical

fault, grounding reduces the

risk of electrical shock.

• Do not, under any circumstances,

cut or remove the third

(ground) prong from the power

cord or use an adapter.

• Consult a qualied electrician if

the grounding instructions are

not completely understood, or

if doubt exists as to whether the

appliance is properly grounded.

• The installation of a residual

current safety switch is

recommended to provide

additional safety when using

all electrical appliances.

Safety switches with a rated

operating current not more

than 30mA are recommended.

Consult an electrician for

professional advice.

• Remove and discard

any packaging materials

safely, before rst use.

• To eliminate a choking hazard

for young children, discard

the protective cover tted

to the power plug safely.

• Always ensure the appliance

is properly assembled, as per

2 Sage® Recommends Safety First

6 Components

7 Assembly

10 Functions

12 Care & Cleaning

14 Troubleshooting

16 Guarantee

Contents

3

EN

instructions, before use. Using

the appliance without being

properly assembled may cause

product malfunction, product

damage or pose safety risk

including personal injury.

• This appliance is for household

use only. Do not use the

appliance for anything other

than its intended purpose. Do

not use in moving vehicles or

boats. Do not use outdoors.

Misuse may cause injury.

• Position the appliance on

a stable, heat resistant, level, dry

surface away from the counter

edge, and do not operate on

or near a heat source such as

a hot plate, oven or gas hob.

• Fully unwind the power

cord before operating.

• Do not let the power cord

hang over the edge of

a counter or table. Do not

let the power cord touch hot

surfaces or become knotted.

• Do not leave the appliance

unattended when in use.

• If the appliance is to be left

unattended, cleaned, moved,

assembled or stored, always

switch o the appliance by

pressing the ON | OFF button

to OFF. Switch o and unplug

from the power outlet.

• Turn the appliance OFF, then

unplug from the outlet when not

in use, before assembling or

disassembling parts and before

cleaning. To unplug, grasp the

plug and pull from the outlet.

Never pull from the power cord.

• Regularly inspect the power

cord, plug and actual appliance

for any damage. If found to

be damaged in any way,

immediately cease use of

the appliance and return the

entire appliance to the nearest

authorised Sage Service

Centre for examination,

replacement or repair.

• Keep the appliance and

accessories clean. Follow

the cleaning instructions

provided in this book. Any

procedure not listed in this

instruction booklet should be

performed at an authorised

Sage® Service Centre.

• This appliance is not intended

for use by children or by persons

with reduced physical, sensory,

or mental capabilities, or lack

of experience and knowledge.

Close supervision is necessary

when any appliance is used near

children. Children should be

supervised to ensure that they

do not play with the appliance.

• Children should not play

with the appliance.

• Cleaning of the appliance should

not be carried out by children.

4

• The appliance power cord, and

any components, attachments

or accessories should be

kept out of reach of children

aged 8 years and younger.

• Never use attachments or

accessories that are not supplied

with this product or authorised

by Sage® to be used on this

product. Failing to follow this

instruction may cause product

malfunction, product damage

or even pose safety risk.

• Do not attempt to operate

the appliance by any

method other than those

described in this booklet.

• Do not move the appliance

while in operation.

• Do not operate the appliance

on an inclined surface.

• Do not push food into the

feed chute with your ngers

or other utensils. Always use

the food pusher provided.

Do not place hand or ngers

into the food chute when it is

attached to the appliance.

• Do not juice stone fruit

unless seeds and/or stones

have been removed.

• Make sure the product is turned

OFF and the stainless-steel lter

basket has stopped rotating

and the motor has completely

stopped before releasing

the safety locking arm and/

or attempting to move the

appliance, when the unit is not in

use, and before disassembling,

cleaning and storing.

• Any signicant spillage onto

the surface under or around

the appliance, or onto the

appliance itself, should be

cleaned and dried before

continuing to use the appliance.

• Be careful when handling

the stainless-steel lter

basket as the small cutting

blades at the base of the

lter basket are very sharp.

Mishandling may cause injury.

• Blender blades are sharp,

take care when handling,

emptying and cleaning the

blender jug.Remove rind from

all citrus fruit before juicing.

• Do not use the appliance

if the rotating sieve (lter

basket) or lid is damaged.

• Always make sure chute cover

is clamped securely in place

before motor is turned on.

• Do not operate without the

pulp container in place.

• Do not unfasten interlock arm

while unit is in operation.

• A representative example of the

heaviest loading anticipated for

use with this appliance is 450g

of frozen banana pieces and

1000g of milk blended on the

highest speed for 30 seconds.

5

EN

• Do not juice more than 3kg

(approximately 6 pounds)

of carrot at a time.

• Avoid putting the blender

jug on the motor base while

the motor is still spinning.

• Do not operate without any

ingredients in the jug.

• Never attempt to operate

with damaged blades, or

with utensils, or any foreign

objects inside the jug.

• Do not put the jug in extremes

of heat or cold, for example

placing a cold jug into hot

water, or vice versa.

• Lid must be rmly secured

to the jug before operation to

ensure internal contents do not

escape, spray or overow.

• Do not remove the jug from

the motor base while blender

is in use.

• Do not use blender while

OVERLOAD PROTECTION

is ashing on the LCD. If this

occurs, unplug the blender

and wait for 30 minutes until

the motor has cooled. Once

cooled, you will be able to use

the blender as usual again.

• Do not process hot or boiling

liquids. Allow to cool before

placing into the blender jug.

• To protect against electric

shock, do not immerse the

power plug, cord or appliance

in water or any liquid.

• Do not use the appliance if the

power cord, power plug, or

appliance becomes damaged

in any way. If damaged and

maintenance other than cleaning

is required please contact

Sage Customer Service or

go to sageappliances.com

The symbol shown

indicates that this appliance

should not be disposed of

in normal household waste.

It should be taken to a local

authority waste collection centre

designated for this purpose or to

a dealer providing this service.

For more information, please

contact your local council oce.

To protect against electric

shock, do not immerse the,

power base, power cord or power

plug in water or allow moisture to

come in contact with these parts.

Avoid spilling water onto the

power base’s connector. Do not

immerse the power base for

cleaning.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

6

Components

A

I

H

J

K

L

M

B

C

D

E

F

G

A. Food pusher (not dishwasher safe)

B. Juicer cover (dishwasher safe)

C. Stainless steel lter basket (dishwasher safe)

D. Filter bowl surround (dishwasher safe)

E. Interlocking safety arm

Stops motor base operating without cover

locked into place.

F. Control panel

G. Stainless steel motor base

H. Inner measuring cup (dishwasher safe)

I. 1.5 litre blending jug & lid (dishwasher safe)

J. Juicing nozzle (dishwasher safe)

Can be placed over spout to juice directly

into a cup.

K. Drip stop plug

L. Pulp container (dishwasher safe)

M. Cleaning brush

For use on stainless steel lter basket.

Rating Information

220–240V ~50Hz 1350W

7

EN

Assembly

BEFORE FIRST USE

Wash the lid, inner measuring cup, jug, the

lter bowl surround, lter basket, juicer cover,

food pusher and pulp container in warm,

soapy water with a soft cloth. Rinse and dry

thoroughly.

Place motor base on a at, dry surface such

as a countertop. Ensure that the appliance is

switched to OFF at the motor base and the

power cord is unplugged.

JUICING

1. Place lter bowl surround on

top of the motor base.

2. Align the arrows at the base of the

stainless-steel lter basket with the

arrows on the motor drive coupling and

push down until it clicks into place to

create a secure t with the motor base.

3. Place the juicer cover over the lter bowl

surround, positioning the lower part

of the feed chute over the stainless

steel lter basket.

4. Raise the safety locking arm up and

locate into the two grooves on either

side of the juicer cover.

8

5. The safety locking arm should now be in

a vertical position and locked into place

on top of the juicer cover.

6. Slide the food pusher down the food

chute by aligning the groove in the food

pusher, with the small protrusion on the

inside of the top of the feed tube.

Food

pusher

groove

Small

protrusion

inside

feed tube

7. Place the pulp container into position by

tilting and lifting the motor base slightly.

Insert the pulp container under the juicer

cover on the back ensuring the front edge

is tucked under the back lip of the lter

bowl surround and the bottom edge is

clipped into the bottom of the motor base.

8. Drip stop plug can be tted over juice

outlet nozzle. It then allows the outlet to be

plugged to prevent dripping

after juicing.

9. Fit the lid to the blender jug and position

jug under juice spout.

10. Optional: For juicing into a cup the Juicing

Nozzle can be tted onto the juice outlet

nozzle.

9

EN

BLENDING

1. With the blender jug in the upright

position place it on the motor base.

The handle of the blender can

be positioned to the left or right-

hand side of the appliance.

2. Raise the safety locking arm up

and locate into the two grooves

on either side of the blender.

3. Add food or liquid into the blender jug

ensuring not to exceed the ‘MAX’ mark.

Place the blender lid rmly into position

on the top of the blender jug. Insert

the clear, inner measuring lid into the

blender lid and turn clockwise to lock

into position. The jug features a Sage®

Assist™ Lid. This allows the lid to t

tightly onto the blender jug, avoiding

displacement during operation.

4. Ensure the spout cover of the

blender lid is clipped into place and

closed. The ring pull design allows

the user to easily remove the lid

with a simple leverage action.

After appliance is assembled into blender or

juicer conguration, plug power cord into a

220–240V power outlet and turn on.

Press the ON / OFF button to turn the

appliance on. The ON / OFF button will

illuminate. The LCD timer screen will

illuminate with ‘0:00’ displayed.

10

Functions

12345

OVERLOAD

PROTECTION

6 7 8 9 10

SOFT HARD

+

G

R

E

N

S

M

O

T

H

I

E

S

M

O

T

H

I

E

P

U

L

S

E

I

C

E

C

R

U

S

H

A

U

T

O

C

L

E

A

N

F

R

O

Z

E

N

C

O

C

K

T

A

I

L

GETTING STARTED

The ON / OFF button powers the unit into

READY mode.

PRESET PROGRAMS

BLENDING

The appliance has 5 preset functions:

Smoothie, Green Smoothie, Pulse/Ice Crush,

Auto Clean and Frozen Cocktail. These

pre-programmed cycles automatically adjust

the blending time and speeds to optimise

blending results. These programs are only

activated when your appliance is in blender

set up. They can't be used when your

appliance is set up in juicing conguration.

Select the required function by pressing

the corresponding function button. The unit

will start to operate, and the selected function

button will illuminate. The timer will start

to count down and program will end

automatically when it reaches '0:00'.

The program and timer can be paused

by pressing the pause button. Resume

by pressing program button again, or cancel

by pressing pause again.

The program can also be canceled at any

time by pressing the ON|OFF button.

Turning the speed dial will interrupt the

program, placing the blender in manual

mode starting from Speed 1.

Smoothie

For dairy-based smoothies a combination of

speeds and pulses are designed to combine

and aerate ingredients into a smooth and

creamy texture.

Green Smoothie

For blending whole fruits/vegetables into

a smooth beverage. A combination of high-

speed proles breaks down tough bres into

very ne particles.

Frozen Cocktail

For creating ice-based cocktails and drinks

like Margaritas, Daiquiris and Slushies. An ice

crush program followed by a short blend.

Pulse / Ice Crush

A program of continuous pulsing designed to

chop food into an even consistency or crush

ice cubes. Use the PULSE button when the

food that is being processed is too thick or

coarse to circulate within the blender jug.

The pulse program can automatically detect

when ice has been fully crushed and ends

the program early, indicated by a series of

longer pulses.

11

EN

The maximum amount of ice cubes

the blender can blend without liquid

in the jug at any one time is 1 standard

ice tray or 250g.

Auto Clean

Use to remove most of the ingredients o

the blender walls and blades. Add 2 cups

warm soapy water and press the clean

button. For harder to clean, sticky or thick

ingredients, add ½ teaspoon of dishwashing

detergent for extra cleaning power. For best

results, clean the blender jug this way

immediately after use. The Auto Clean

function only cleans the blender jug.

It doesn't clean the juicer.

MANUAL OPERATION

SPEED CONTROL DIAL

Blending

Turn the Speed Control Dial clockwise to

select one of 10 speed settings from a slow

STIR through to a very fast PULVERIZE.

The timer will start to count up, and blending

will stop when it reaches '2:00'.

Blending can be paused by pressing pause

button. Press pause button again to cancel,

or turn dial to resume blending from Speed 1.

To stop blending, turn the Speed Control

Dial anticlockwise back to READY or press

ON|OFF button.

JUICING

Wash your selection of fruit and vegetables to

be juiced. Most fruit and vegetables such as

apples, carrots and cucumbers will not need

to be cut or trimmed to size as these will t

whole into the feed chute. Ensure vegetables

such as beets, carrots etc. have all soil

removed, are washed well and trimmed

of leaves before using.

1. Plug the power cord into your

220–240V power outlet.

IMPORTANT

Do not load feed chute with produce before

the Juicer has reached the selected speed.

2. Turning the Juicer On Turn dial to desired

speed setting. Use lower numbers

(1–5) for soft fruits and vegetables

and higher numbers (6–10) for hard

fruits and vegetables. See Speed

Selector Guide table on the next page

to match speed and produce type for

maximum yield. "Low" range, while

it may not maximise yield of some

produce, allows you to extract juice

at a signicantly lower noise level.

3. With the motor running, place food into

the feed chute and use the food pusher

to gently guide food down. To extract

the maximum amount of juice, always

push the food pusher down slowly.

4. Full Blender Jug You can keep juicing

until the jug is lled to max. level.

WARNING

Never use ngers, hands or utensils to push

food down the feed chute or to clear the feed

chute. Always use the food pusher provided.

CAUTION:

sharp blades

The stainless steel lter basket contains

small sharp blades to cut and process fruit

and vegetables. Avoid touching the blades

when handling the lter basket.

12

SPEED SELECTOR GUIDE

Food Type Speed

APPLES 10

BABY SPINACH 9

BEETROOT 10

BLUEBERRIES 5

BROCCOLI 7

CABBAGE 9

CAPSICUM 9

CARROT 10

CELERY 4

CITRUS FRUITS (peeled) 1

CUCUMBER 4

GINGER 8

GRAPES (seedless) 2

HONEYDEW MELON (peeled) 3

KALE 9

KIWI (peeled) 5

MANGO (peeled, pit removed) 5

MINT 9

PEACH (pit removed) 5

PEARS 6

PINEAPPLE (peeled) 7

RHUBARB 8

SQUASH 9

STRAWBERRIES 4

TOMATOES 4

WATERMELON (peeled) 3

ZUCCHINI 6

Care & Cleaning

Ensure the motor base is turned o by by

pressing the ON / OFF button. Then unplug

the power cord.

CLEANING

1. Remove Blender Jug.

2. Disengage Locking Bar, pull

up entire Juice Collector

Assembly and take to sink.

3. Remove Pulp Container.

Empty as much pulp as possible into

bin/compost. Rinse all parts after use (except

the motor base) under running water to clear

away the majority of juice and pulp. Wash in

warm soapy water with a soft cloth.

To avoid food drying on to the blades, mesh

or transparent parts, rinse and wash as soon

as possible after use.

PULP CONTAINER

To minimize cleaning, you can line the pulp

container with a biodegradable bag to collect

the pulp.

MOTOR BASE

Wipe down with a soft damp cloth. Do not

immerse the motor base in liquids.

CLEANING AGENTS

Do not use abrasive scouring pads or

cleaners on either the motor base or the jug,

as they may scratch the surface. Use only

warm soapy water with a soft cloth

13

EN

JUG AND LID

In order to keep your jug clean and avoid

food drying on the blades and jug, follow the

below steps as soon as possible after use.

Rinse most of the ingredients o the jug

and lid.

Fill the jug with 500ml of warm water, t the

lid and press the AUTO CLEAN button.

If thick or sticky ingredients require extra

cleaning power add a few drops of dish liquid

detergent.

Rinse the jug and lid again and/or wash

separately in warm soapy water with a soft

cloth or bottle brush.

It is most eective to clean the jug

immediately after use.

FILTER BASKET

To ensure consistent juicing results, always

clean the lter basket thoroughly immediately

after use, using the included brush.

If pulp is left to dry, it may clog the ne pores

of the lter mesh, which can aect juicing

performance. The lter basket can be

soaked in hot soapy water for 10 minutes,

if necessary.

DISHWASHER

All parts except for the motor base and food

pusher are dishwasher safe. The blender

jug can be placed on the bottom shelf of the

dishwasher. The lid and inner measuring

cap should be washed on the top shelf only.

However, washing parts on a regular basis

in the dishwasher can shorten the life of

them due to prolonged exposure to harsh

detergents, hot water and pressure.

Cleaning the parts in the dishwasher also

may cause parts to deteriorate so inspect

the parts regularly and stop using the product

if any signs of damage is noticed.

STUBBORN FOOD STAINS

Strong smelling foods such as garlic, sh and

some vegetables such as carrots may leave

an odour or stain on the blender jug and

lid. To remove, soak blender jug and lid for

5 minutes in warm soapy water. Then wash

with a mild detergent and warm water, rinse

well and dry thoroughly. Store jug with the lid

o.

STORAGE

Store the appliance upright with the blender

jug assembled on the motor base, or beside

it. Do not place anything on top. To allow air to

circulate, keep the lid o.

WARNING

Oils in citrus rind can damage the material

of your blender jug if exposed to it for a longer

period. Always clean your blender jug

immediately after processing citrus rind.

14

Troubleshooting

LCD screen turns on

but appliance doesn't

respond to controls.

• The safety locking arm may not be correctly engaged in the vertical

operating position. In this case, the LCD screen will show an animated

prompt . Check the top cover is properly aligned and the locking arm

is located rmly into the two grooves on either side of the juicer cover

or blender jug.

Food is unevenly

chopped • This can happen when too much food is being added at one time.

Try a smaller amount, and work in batches if necessary.

Food is chopped

too ne or is watery • Try blending for shorter period of time. Use the PULSE function for

better control.

Excess pulp

building up in the

stainless-steel

lter basket

• Turn the appliance o. Disassemble to scoop excess pulp o the juicer

cover.

• Reassemble and continue juicing. Alternating soft and hard ingredients

may help avoid this.

Pulp too wet

and reduced

extracted juice

• The cleaner the lter, the better the juice yield, and dryer the pulp. Be sure

to thoroughly clean the juicer as soon as possible after each use. Remove

the stainless-steel lter basket and thoroughly clean mesh walls with

a cleaning brush. Rinse the lter basket under hot water. If the ne mesh

holes are blocked, soak the basket in a solution of hot water with 10%

lemon juice to unblock the holes or wash in the dishwasher (top shelf).

This will remove excess ber build up which could be inhibiting the ow.

• Pusher force could reduce yield because it slows the motor down.

Avoid putting pressure on the food pusher when pushing ingredients

down the feed chute.

• If juicing large amounts of brous ingredients like rhubarb and pineapple,

cleaning the lter basket in between might be required.

Juice leaks between

the lter bowl

surround and

the juicer cover

• Try a slower juicing speed and push the food pusher down the feed chute

more slowly.

• Ensure there is no build up in the lter basket.

Juice sprays

out from spout • The juice is being extracted too fast; try a slower juicing speed (if possible)

and push the food pusher down the feed chute more slowly.

Juice in lter

bowl is left after

juicer stopped

• Turn the speed dial up to highest speed setting and operate for 5 seconds.

That can help moving the remaining juice into the jug.

15

EN

Motor appears to

stall during juicing • Wet pulp can build up under the juicer cover and stall the appliance if the

appliance is used excessively without cleaning. If this occurs, disassemble

and follow the cleaning instructions to clean the lter bowl surround, the

stainless-steel lter basket and the juicer cover. The appliance can also

stall if excessive force is used to push produce down the feed chute.

If this occurs, ensure that a gentler pressure is used to push produce

down the chute.

• Turn on the appliance before putting ingredients in the chute. Pressing

ingredients down before the motor reaches full speed can cause it to

stall or overload. Use gentle to moderate pressure on the pusher.

Lower pressure produces a better juice yield.

• Hard fruit and vegetables will put excess strain onto the motor if a low

speed is selected. Refer to the reference guide to determine the correct

speed for the fruit and vegetables selected for juicing.

All control panel

lights ash and

Overload Protection

displayed on

LCD screen

• This indicates motor overload protection is activated due to motor

overheating or stalling.

• To reset the protector, unplug from the power supply, then plug back in

and turn on.

• If overload protection is still displayed, unplug the appliance and leave

to cool for at least 30 minutes, then try again. The appliance must be

unplugged while cooling in order to reset properly.

• If the issue persists after allowing to cool, this indicates an internal problem.

Contact Sage Customer Service or go to www.sageappliances.com.

• Note that triggering the overload protection indicates abnormal use of

the appliance, such as too much load in the blender jug, excessive push

force when juicing or extended continuous use. Please take note of the

conditions and refer to all of the information in these instructions to avoid

this occurrence and extend the life of the appliance.

16

2 YEAR LIMITED GUARANTEE

Sage Appliances guarantees this product for

domestic use in specied territories for 2 years

from the date of purchase against defects caused

by faulty workmanship and materials. During this

guarantee period Sage Appliances will repair,

replace, or refund any defective product (at the

sole discretion of Sage Appliances).

All legal warranty rights under applicable

national legislation will be respected and will

not be impaired by our guarantee. For full terms

and conditions on the guarantee, as well as

instructions on how to make a claim, please

visit www.sageappliances.com.

Guarantee

17

EN

Notes

18

SAGE®

ANBEFALER

SIKKERHED

FREM FOR ALT

Hos Sage® er vi meget

sikkerhedsbevidste. Når

vi designer og producerer

forbrugerprodukter, er det

først og fremmest med

brugernes sikkerhed for

øje. Derudover beder vi om,

at du udviser varsomhed,

når du bruger et elektrisk

apparat og overholder de

følgende forholdsregler.

VIGTIGE

SIKKERHEDS

OP LYSNINGER

LÆS HELE BRUGSANVISNIN

GEN, FØR APPARATET TAGES

I BRUG, OG GEM DEN TIL

FREMTIDIG REFERENCE

• Før apparatet tages i brug første

gang skal du sikre dig, at din

elforsyning er den samme som

vist på mærkaten i bunden

af apparatet. Apparatet er

udstyret med et strømkabel,

der har en jordledning med et

jordstik. Apparatet skal jordes

ved hjælp af en korrekt jordet

stikkontakt. I tilfælde af elektrisk

kortslutning mindsker jordingen

risikoen for elektrisk stød.

• Klip eller fjern under ingen

omstændigheder det tredje

(jord) ben fra strømkablet,

og brug ikke en adapter.

• Spørg en kvaliceret elektriker til

råds, hvis jordingsinstruktionerne

ikke er helt klare, eller hvis der er

nogen tvivl om, hvorvidt appara-

tet har korrekt jordforbindelse.

• Det anbefales at installere

en sikkerhedskontakt for

reststrøm som ekstra

sikkerhedsforanstaltning

ved brug af alle el-apparater.

Det anbefales at bruge

sikkerhedskontakter med en

maksimal arbejdsstrøm på ikke

over 30 mA. Kontakt en elektriker

for at få professionel hjælp.

• Fjern al emballage og

indpakning, før du bruger

apparatet første gang.

• Bortskaf beskyttelsesindpak-

ningen omkring stikket på

forsvarlig vis, da børn kan blive

kvalt, hvis de putter det i munden.

18 Sage® anbefaler sikkerhed frem for alt

22 Komponenter

23 Samling

26 Funktioner

28 Pleje og rengøring

30 Fejlnding

32 Garanti

Indhold

19

DK

• Kontrollér altid, at apparatet er

rigtigt samlet ifølge brugsan-

visningen, inden det bruges.

Brug af apparatet uden at være

korrekt monteret kan forårsage

funktionsfejl, produktskade

eller udgøre sikkerhedsrisiko,

herunder personskade.

• Dette apparat er kun til

husholdningsbrug. Brug ikke

apparatet til andet end det

tiltænkte formål. Brug ikke

apparatet i køretøjer eller

både i bevægelse. Brug

det ikke udendørs. Forkert

brug kan medføre skader.

• Placer apparatet på en stabil,

varmefast, tør ade væk fra

bordkanten, og brug det ikke

nær en varmekilde som f.eks.

en varmeplade eller et gasblus.

• Ledningen skal være viklet

helt ud før brug.

• Sørg for, at ledningen ikke

hænger ud over bordkanten.

Lad ikke ledningen berøre

varme overader eller

blive viklet sammen.

• Lad ikke apparatet være uden

opsyn, når det er i brug.

• Hvis apparatet ikke overvåges,

skal rengøres, yttes, monteres

eller opbevares, skal du altid

slukke for apparatet ved at

sætte ON | OFF-knappen til

OFF. Sluk for strømmen, og tag

stikket ud af stikkontakten.

• Sæt apparatet på OFF,

og tag derefter stikket ud af

stikkontakten, når det ikke

er i brug og før montering

eller demontering af dele

eller rengøring. For at tage

stikket ud, tag fat i stikket og

træk det ud af stikkontakten.

Træk aldrig i strømkablet.

• Efterse jævnligt ledningen,

stikket og selve apparatet for

eventuelle skader. Hvis du

opdager skader, skal du stoppe

apparatet og returnere det til det

nærmeste autoriserede Sage

servicecenter til undersøgelse,

udskiftning eller reparation.

• Hold apparatet og tilbehøret rent.

Følg rengøringsvejledningen

i denne manual. Enhver

procedure, som ikke er

angivet i denne vejledning,

skal udføres på et autoriseret

Sage® servicecenter.

• Dette apparat er ikke beregnet

til brug af børn eller af personer

med nedsatte fysiske, sensoriske

eller mentale evner eller mang-

lende erfaring og viden. Nøje

overvågning er nødvendig,

når et apparat bruges af eller

nær børn. Hold øje med

børn, og sørg for, at de

ikke leger med apparatet.

• Børn må ikke lege med apparatet.

• Rengøring af apparatet må ikke

udføres af børn.

20

• Apparatets strømkabel og alle

komponenter, dele eller tilbehør

skal opbevares utilgængeligt

for børn på 8 år og yngre.

• Brug aldrig dele eller tilbehør,

der ikke leveres med dette

produkt eller er autoriseret af

Sage® til brug på dette produkt.

Manglende overholdelse af

denne anvisning kan forårsage

funktionsfejl, produktskade eller

udgøre en sikkerhedsrisiko.

• Forsøg ikke at betjene apparatet

på anden måde end som

beskrevet i denne vejledning.

• Flyt ikke apparatet, mens det

er i brug.

• Brug ikke apparatet på en

overade, der hælder.

• Skub ikke fødevarer ind

i påfyldningsrøret med ngrene

eller andre redskaber. Brug altid

den medfølgende fødevareskub-

ber. Anbring ikke hånden eller

ngrene i fødevarerøret, når

den er monteret på apparatet.

• Lav ikke saft af stenfrugter,

medmindre frø og/eller sten

er fjernet.

• Sørg for, at produktet er sat på

OFF og at lterkurven af rustfrit

stål er holdt op med at rotere

og at motoren er standset helt,

før sikkerhedslåsegrebet frigøres

og/eller før forsøg på at ytte

apparatet, når enheden ikke

er i brug samt før demontering,

rengøring og opbevaring.

• Alt betydeligt spild på overaden

under eller omkring apparatet

eller på selve apparatet skal

rengøres og tørres op, før

fortsat brug af apparatet.

• Vær forsigtig, når du håndterer

lterkurven af rustfrit stål, da

de små skæreblade i bunden

af lterkurven er meget skarpe.

Fejlhåndtering kan medføre

personskade.

• Blenderknivene er skarpe, så pas

på, når du håndterer, tømmer

og rengør blenderkanden.

• Brug ikke apparatet, hvis den

roterende sigte (lterkurv)

eller låget er beskadiget.

• Sørg altid for, at saftpresser-

dækslet er sikkert sat fast,

inden motoren tændes.

• Må ikke bruges uden

frugtkødsbeholderen

sat på plads.

• Låsegrebet må ikke løsnes,

mens enheden er i drift.

• Et repræsentativt eksempel

på den tungeste belastning,

der forventes under brug af

dette apparat, er 450 g frosne

bananstykker og 1 liter mælk

blandet ved den højeste

hastighed i 30 sekunder.

• Pres ikke mere end 3 kg gulerod

ad gangen.

• Undgå at placere blenderkanden

på motordelen, mens motoren

stadig drejer.

Sidan laddas...

Sage SJB815 Användarguide

Sage SJB815 Användarguide

på andra språk

Andra dokument