Philips HP3506/06 Användarmanual

Philips SleepMapper app

HF367X series

3

4

2

1

14

13

1

12

8

6

5 39

10

11

7

English 6

Dansk 25

Deutsch 44

Français 65

Italiano 85

Nederlands 105

Norsk 126

Suomi 145

Svenska 165

English

Contents

Introduction ___________________________________________________________________________________________ 6

General description____________________________________________________________________________________ 7

Intended use___________________________________________________________________________________________ 7

The effects of the connected Sleep & Wake-Up Light________________________________________________ 7

Important safety information__________________________________________________________________________ 7

Safety and compliance________________________________________________________________________________ 9

Electromagnetic fields (EMF)__________________________________________________________________________ 9

Display icons___________________________________________________________________________________________ 9

Connecting your appliance to Wi-Fi__________________________________________________________________ 10

Navigating the menu___________________________________________________________________________________ 12

Setting wake-up profiles______________________________________________________________________________ 12

PowerBackUp+________________________________________________________________________________________ 13

Snoozing_______________________________________________________________________________________________ 13

Dismissing the alarm___________________________________________________________________________________ 13

Using the appliance as a reading light________________________________________________________________ 14

Midnight light__________________________________________________________________________________________ 14

Settings_________________________________________________________________________________________________ 14

Listening to radio or your own music_________________________________________________________________ 16

Wind-down programs_________________________________________________________________________________ 17

Sunset simulation______________________________________________________________________________________ 17

RelaxBreathe___________________________________________________________________________________________ 18

Bedtime function______________________________________________________________________________________ 19

Charging your mobile phone__________________________________________________________________________ 19

Cleaning and storage__________________________________________________________________________________ 19

Recycling_______________________________________________________________________________________________ 19

Accessories and spare parts___________________________________________________________________________ 20

Troubleshooting_______________________________________________________________________________________ 20

Specifications__________________________________________________________________________________________ 23

Introduction

The Philips connected Sleep & Wake-Up Light helps you wake up more

pleasantly. If the Sunrise simulation is active (default is 30 minutes), the light

intensity of the lamp gradually increases to the set level and the light color

changes from deep morning red to bright daylight. The light gently prepares

your body for waking up at the set time. To make waking up an even more

pleasant experience, you can use natural wake-up sounds or the FM radio

to wake up to.

The light-guided breathing function, personalized sun settings, bedroom

environment tracking and several other features make this Connected Sleep

& Wake-Up Light the perfect companion for your bedroom.

Tip: Using the Philips SleepMapper app will enable extra features. Any

information about these features is explained in the app.

6

English

General description

1 Deco ring

2 Lamp housing

3 Display

4 Sound pressure sensor

5 USB charging port

6 Reset button

7 Radio antenna

8 AmbiTrack sensor: Humidity and temperature sensor

9 Auxiliary (AUX) inlet

10 Adapter DC-inlet

11 Speaker

12 Snooze/Midnight Light

13 Adapter

14 Small plug

Intended use

The Philips connected Sleep & Wake-Up Light is intended to give you a

more natural and refreshed wake-up and a relaxed feeling before falling

asleep.

This is not a general illumination product.

The effects of the connected Sleep & Wake-Up

Light

The Philips connected Sleep & Wake-Up Light gently prepares your body for

waking up during the last 5 to 40 minutes of your sleep, depending on the

Sunrise simulation time you set. In the early morning hours, our eyes are

more sensitive to light than when we are awake. During this period, the

relatively low light levels of a simulated natural sunrise prepare our body for

waking up and getting alert.

People who use the connected Sleep & Wake-Up Light report waking up

more easily, have a better overall mood in the morning and feel more

energetic. Because the sensitivity to light differs per person, you can set the

light intensity of your appliance to a level that matches your light sensitivity

for an optimal start of the day. For more information about the connected

Sleep & Wake-Up Light, see www.philips.com.

Important safety information

Read this important information carefully before you use the appliance and

save it for future reference.

Danger

-

Water and electricity are a dangerous combination. Do not use this

appliance in wet surroundings (e.g. in the bathroom or near a shower or

swimming pool).

7

English

-

Keep the adapter dry.

-

This appliance is for indoor use only.

-

Do not let water run into the appliance or spill water onto the appliance.

-

Do not immerse the appliance in water or rinse under the tap.

-

Do not place anything close to the appliance that could cause water or

any other liquid to drip or splash onto the appliance.

-

The adapter contains a transformer, which converts an unsafe

100-240Vac mains voltage to a safe 24Vdc low voltage. Do not cut off the

adapter to replace it with another plug, as this causes a hazardous

situation.

Warning

-

Never use the appliance if the lamp housing is damaged, broken or

missing.

-

If the adapter, cord or appliance has been damaged in any way, liquid

has spilled or objects have fallen into and/or onto the appliance, the

appliance has been exposed to rain or moisture, does not operate

normally or has been dropped or damaged, it should not be operated.

-

If you feel uncomfortable at any point while using RelaxBreathe in the

breathing exercise, just go back to breathing normally.

-

Only use the appliance in combination with the adapter supplied.

-

If the adapter (cord) is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

-

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

-

Consult your doctor before you start using the appliance if you have

suffered from or are suffering from depression.

-

Do not use this appliance as a means to reduce your hours of sleep. The

purpose of this appliance is to help you wake up more easily. It does not

diminish your need for sleep.

Caution

-

Check if the voltage indicated on the appliance corresponds to the local

voltage before you connect the appliance.

-

Protect the power cord from being walked on or pinched, particularly at

plugs, outlet and point where they exit from lamp.

-

Do not use the adapter in or near wall sockets that contain an electric air

freshener to prevent irreparable damage to the adapter.

-

Do not drop the appliance on the floor, hit it hard or expose it to other

heavy shocks.

-

Place the appliance on a stable, level and non-slippery surface.

-

Do not impair the cooling of the appliance by covering the appliance with

items such as blankets, curtains, clothes, papers, etc.

-

Do not use the appliance at room temperatures lower than 5°C or higher

than 35°C.

8

English

-

The appliance has no on/off switch. To disconnect the appliance, remove

the plug from the wall socket. The adapter must remain easily accessible

at all times.

-

This appliance is only intended for household use, including similar use

for instance in hotels.

-

No naked flame sources, such as lighted candles, should be placed on

the appliance.

General

-

If you often wake up too early or with a headache reduce the set light

intensity level and/or the set Sunrise Simulation time.

-

If you often wake up by the alarm sound, increase the set light intensity

level or the set Sunrise Simulation time.

-

If you share a bedroom with someone else, this person may

unintentionally wake up from the light of the appliance, even though this

person is further removed from the appliance. This phenomenon is the

result of differences in light sensitivity between people.

-

The power consumption of the appliance is lowest if no device is

connected to the USB port and the lamp, radio, display and Wi-Fi are

turned off.

Safety and compliance

This appliance meets the safety requirements in the EU for:

-

IEC 60598: Luminaires.

-

IEC 62471: Photobiological safety of lamps and lamp systems.

-

IEC 62368: Audio/video, information and communication technology

equipment.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and

regulations regarding exposure to electromagnetic fields.

Display icons

Wake-up profile / Alarm Light intensity and light on/off

Settings Radio or your own music

Wind-down program Wi-Fi

Wi-Fi disabled Audio feedback

9

English

Display brightness Enable automatic display on

Disable automatic display off Radio

AUX inlet Sunset simulation

RelaxBreathe RelaxBreathe rythms

Light or sound guidance Start bedtime

Snooze/Midnight Light

Connecting your appliance to Wi-Fi

The firmware of your appliance might be automatically updated when you

connect to Wi-Fi. If your appliance is updated, the information in this user

manual may not be up to date. Find the latest user manual online.

Easy Wi-Fi setup

Download the Philips SleepMapper app from Google play or the App store

on your smartphone. See the information in Google play or the App store to

check if your smartphone is compatible with the app. You can easily set up

the Wi-Fi connection to your connected Sleep & Wake-Up Light.

The setup to install your Sleep & Wake-Up Light and connect to your home

Wi-Fi network only needs to be done once. This setup will take

approximately 5-10 minutes.

Setup wizard of the connected Sleep & Wake-Up Light

1 When you use your connected Sleep & Wake-Up Light for the first time, a

setup wizard starts on the appliance.

2 After selecting your language on the display of the appliance, continue in

the app. Make sure that you have the app open on your smartphone.

10

English

3 Follow the instructions in the app to connect your appliance to the Wi-Fi

network. If you have trouble connecting your appliance, check the items

mentioned in the troubleshooting section (see 'Troubleshooting').

-

If you previously chose to set up your appliance without the app, but

now want to connect your appliance to the app you press and hold the

Wi-Fi icon for 8 seconds. The access point mode icon will be shown on

the display . Open the app on your smartphone to connect.

-

If you have changed your Wi-Fi home network or changed your

password, you also need to press and hold the Wi-Fi icon for 8 seconds

. You will see the access point mode icon on the display .Open the

app on your smartphone to connect.

Note: Make sure your smartphone is connected to the Wi-Fi network you

use in your bedroom.

Note: The app on your smartphone and your connected Sleep & Wake-Up

Light can ONLY communicate with each other when both appliances are

connected to the same home Wi-Fi network.

Note: You cannot remotely control the device through the app (e.g. set an

alarm) if you are not connected to your home Wi-Fi network or if your

smartphone is connected to 4G.

This Wi-Fi connection issue icon might appear on the display if a connection

cannot be established. Check the troubleshooting section to solve the

problem.

AmbiTrack sensors

The connected Sleep & Wake-Up Light collects input from its surroundings

through the AmbiTrack sensors. AmbiTrack sensors measure light, humidity,

temperature and sound pressure. These factors can influence your sleep.

Only in the app you can see information on the recommended values for

ideal sleep conditions. The measurements of the sensors can be influenced

by the surroundings of the connected Sleep & Wake-Up Light.

For example, if you place the appliance next to a window or near a heating

source such as a radiator, the temperature and humidity sensors might not

represent the temperature / humidity of the entire room.

Setting up your appliance without the app

You can set up the Sleep & Wake-Up Light without the app. Before you can

use the appliance, a setup wizard on the appliance needs to be completed

first. You can connect the appliance to the app later (see 'Easy Wi-Fi setup').

We strongly recommend you to set up your appliance with the SleepMapper

app in order to enjoy all functionalities the app offers.

11

English

1 Start the setup wizard by tapping on the start icon on the display of the

appliance.

2 You will be guided through the setup wizard on the appliance, where you

set the desired settings, a wake-up profile and a winddown program.

Note: The wake-up profile and the wind-down program can be set later.

Skip these settings by tapping the arrow repeatedly. However, we advise

you to set your wake-up profile and your wind-down program during this

setup. This can help you explore the different functions of the appliance.

Navigating the menu

If you have set up your appliance with the help of the SleepMapper app (see

'Easy Wi-Fi setup') or through the setup wizard (see 'Setting up your

appliance without the app') on the appliance, you will see the menu as

described in the following sections.

On the display of the appliance you can select and set the wake-up profile,

reading light, settings, sound (source) or the unwind program.

Note: All your personalized settings and profiles will be permanently stored

in the memory, they will not be erased by removing the adapter from the

electrical outlet. You can change all settings at any time, the last setting will

be stored.

Note: If the display is blank, move your hand towards the lower part of the

Sleep & Wake-up Light to show the display menu. You will see the menu

icons.

Setting wake-up profiles

In your wake-up profile on the appliance you can set the alarm time, the

maximum light intensity and type of wake-up sound you prefer. With the

SleepMapper app, you can set more wake-up profiles.

Note: The main display of the appliance shows if the alarm has been set.

To disable the alarm, press on the disable alarm icon .

Note: Press and hold the alarm icon to deactivate all set alarms at once.

Set wake-up profile

You can set 2 different wake-up profiles on the appliance. For each profile,

you can set the time, light intensity, wake-up curve duration, type of sound

and volume. With the SleepMapper app you can set 16 alarms in total, giving

you more options to choose the time and day on which the alarm should go

off.

12

English

Duration of the wake-up profile

The default duration of the wake-up curve (brightness increase to the set

maximum light intensity) is 30 minutes. The duration can be changed to your

preference by pressing the icon on the appliance. With the Sleepmapper

app you can set different wake-up profiles.

Light intensity of the wake-up profile

The lamp of the appliance simulates a sunrise. Like a sunrise, the brightness

of the lamp increases gradually. During this wake-up curve, the color of the

light changes from soft red to warm orange to bright yellow. You can choose

one of the 25 light intensity levels.

Type of sound

You can choose between three options. Select one of the natural sounds ,

no sound or the FM radio .

PowerBackUp+

In the event of a power failure, all functions of the appliance, including the

display, do not work. However, the internal clock and a back-up alarm

remain active for at least 8 more hours.

If during the power failure the set alarm time is due, a back-up alarm goes

off generating a beeping sound for approximately 1 minute.

Snoozing

When the wake-up curve has ended (when the set maximum light intensity

has been reached) and the alarm sound is playing, you can tap the top of

the appliance to snooze.

The lamp stays on, but the sound is muted. After 9 minutes, the alarm sound

starts playing again.

Note: The light and sound automatically turn off 60 minutes after the alarm

has gone off or 60 minutes after the last snooze action.

Dismissing the alarm

When the alarm goes off, you can dismiss it by pressing this icon on the

appliance. If you dismiss it, this alarm profile is deactivated for that day.

13

English

Using the appliance as a reading light

You can use the connected Sleep & Wake-Up Light as a reading light.

Press the reading light icon on the display to switch on the reading light.

Note: You can increase and decrease the brightness intensity. You can select

a brightness between 1 (low) and 25 (high). The default brightness setting is

18.

To switch off the light, press the cross icon in the menu.

Tip: When the light is on, you can also turn off the light with a single tap on

the top of the appliance. All active programs will stop. Set alarms are still

active.

Midnight light

If you wake up during the night, you can tap the top of the appliance to

activate a dim light. This dim, subtle orange light provides you with just

enough light to find your way in the dark. Switch off the Midnight light by

tapping the top of the appliance again.

Note: The Midnight light cannot be activated directly when the main light is

already on. In that case, first tap the top of the appliance to deactivate the

main light. Then tap again to activate the Midnight light.

Settings

In this menu, you can adjust the clock time, the audio feedback, the display

brightness of the appliance and enable/disable Wi-Fi.

Note: Press and hold the settings icon for 8 seconds to open a new menu, in

which you can select DEMO mode (accelerated wake-up curve) or VERSION

(firmware version of the appliance).

If you have updated the appliance through connection to the app, the

information in this document may not be up to date. Find the latest user

manual on www.philips.com/support

Philips reserves the right to update the firmware of the appliance.

14

English

Time

You can change the time and switch between a 12-hour clock (AM/PM) and

a 24-hour clock by pressing on the toggle icon (12/24).

Note: This option is not available when the appliance is connected to Wi-Fi.

Wi-Fi

Turn Wi-Fi on or off by pressing on the Wi-Fi icon. When Wi-Fi is disabled ,

any update made in the app will not be implemented until the Wi-Fi

connection is restored.

Note: Press and hold the Wi-Fi icon for approximately 8 seconds to return to

access point mode. Open access point mode when you want to connect

your appliance to a different Wi-Fi network or if you have changed your Wi-

Fi password.

If you accidentally activated access point mode, press the Wi-Fi icon in the

Wi-Fi menu twice to activate Wi-Fi again. Your connected Sleep & Wake-Up

Light remembers the network you were connected to.

Audio feedback

If you do not want to hear clicks when you press an icon, press the audio

feedback icon to turn off the audio feedback. You hear one click as a

confirmation. To reactivate the audio feedback, press this icon again.

Display

Display brightness

You can adjust the display brightness from level 1 to level 6. We advise you

to set the display contrast in a dark bedroom. Choose a contrast level that is

optimal for you to see the display at night. The display contrast will increase

to a higher level when the Connected Sleep & Wake-up Light measures a lot

of light in the bedroom. This happens automatically, so you will always be

able to see the display, even when the surroundings are lighter.

Display on/off

If you do not want the appliance to produce any light (including time

indication), you can turn off the display completely by pressing the

automatic display off icon.

Normally, if you do not touch the display for some time in any menu, the

display reverts to time and status indication only. When the display is off, no

time indication is shown.

15

English

Disable automatic display off by pressing the crossed-out icon.

Tip: If you want to check the time or select a function while the display is off,

just place your hand near the display to turn it on for a few seconds.

Listening to radio or your own music

Tip: When the radio or music is on, you can turn off the sound with a single

tap on top of the connected Sleep & Wake-Up Light. All active programs will

stop. Set alarms are still active.

Radio

You can listen to the FM radio with the connected Sleep & Wake-Up Light. If

you have set the radio function in the setup wizard, it shows the selected

radio station. You can manually change the radio station by changing the

FM frequency.

Tip: Make sure that you unwind the antenna fully and move it around until

the radio has the best reception.

You can preset 5 radio stations. Within each radio preset, you can manually

set the FM frequency. Press the radio preset icon, then longpress the double

arrow icon to automatically search for the next radio station. To save the

radio frequency, press the check mark icon.

After setting a radio station, you can easily add another preset radio station

by selecting the toggle icon. With this process, you can preset 5 radio

stations.

Set the preferred volume. To save the volume setting, press the check mark

icon.

16

English

Music via Auxiliary (AUX) inlet

You can use the connected Sleep & Wake-Up Light as a speaker for music

by connecting a music playing device (for instance your mobile phone) to

the AUX inlet.

Note: You cannot wake up to music from a device connected to the AUX

inlet.

If the sound is not loud enough when you have set the connected Sleep &

Wake-Up Light to maximum volume, increase the volume of your music

playing device.

If the sound is too loud or distorted when you have set the connected Sleep

& Wake-Up Light to a low volume setting, decrease the volume of your

music playing device.

Note: Press and hold the music note icon to activate/deactivate the sound

via the menu. You can also deactivate the sound by tapping the top of the

appliance.

Note: You need an AUX cable to connect the connected Sleep & Wake-Up

Light to a music playing device.

Wind-down programs

The appliance features two wind-down programs to help you relax before

you fall asleep.

You can deactivate the active wind-down program by tapping the top of the

appliance.

Sunset simulation

During the sunset simulation, the brightness of the light decreases gradually

with colors changing from bright yellow to warm orange to soft red. You can

set the duration of the sunset simulation and the initial light intensity of the

sunset simulation.

You can also select a sound that fades away during the sunset simulation.

You can set the sound source and the initial volume. You can either choose

a natural sound, radio or no sound. You can also play your own music by

connecting a music playing device to the AUX socket.

17

English

RelaxBreathe

RelaxBreathe uses the belly breathing technique as a basis for the breathing

program. You can choose one of the breathing programs, guided by light or

sound. The combination of the belly breathing exercise and the guidance of

the connected Sleep & Wake-Up Light helps you slow down and feel

relaxed.

You can select one of seven relaxation programs with preset breathing

rhythms. Each relaxation program has a different breathing rhythm. The

program '4 breaths' is preset to 4 breaths per minute. Program '5 breaths' is

preset to 5 breaths per minute. Each next program has one additional

breath per minute. The last program (10 breaths) is preset to 10 breaths per

minute.

You can select light or sound to guide you during the selected relaxation

program. Follow the light or sound when you inhale and exhale.

-

For guidance with light, inhale when the light intensity increases. In

between the two subtle light flashes, hold your breath. Exhale slowly

when the light intensity decreases.

-

For guidance with sound, inhale when the intensity of the sound of the

waves increases. When the intensity of the sound pauses, hold your

breath. Slowly exhale when the intensity of the sound of the waves

decreases.

Follow your preferred rhythm with the help of light or sound for a more

relaxed feeling. You can even do this with your eyes closed.

Note: You can find an instruction video of RelaxBreathe in the app and on

the Philips website.

Belly breathing for relaxation

Belly breathing is the most recognized breathing exercise technique to help

people relax. When you breathe from your belly, your diaphragm pulls down

automatically. This pulls down your lungs and allows you to inhale fully and

deeply.

Caution: If you feel uncomfortable at any point during this breathing

exercise, just go back to breathing normally.

How to do belly breathing

1 Lie down comfortably on your back.

2 Inhale through your nose, exhale through your nose or mouth.

18

English

3 Place one hand on your stomach and your other hand on your chest.

You should see your hand on your stomach move up with each inhale

and move down with each exhale. The hand on your chest should only

move slightly.

4 Your breath should only come from your belly. Try to make your exhale

longer than your inhale as this will quickly make you feel more relaxed.

Note: The RelaxBreathe function of the appliance can guide you during

belly breathing.

Bedtime function

You can track your time in bed by longpressing the top of the appliance for

approximately 2 seconds before going to sleep to activate the bedtime

function. Or activate bedtime in the unwind menu. You can also start the

bedtime function by pressing 'start tracking' in the SleepMapper app.

A moon icon will appear on the display of the appliance to let you know

bedtime tracking has started. You can find more information about the

bedtime function in the app.

Charging your mobile phone

You can use the USB port (see 'General description') to charge your

smartphone (max 1000 mA).

Cleaning and storage

-

Clean the appliance with a soft, dry cloth.

-

Do not use abrasive cleaning agents, pads or cleaning solvents like

alcohol, acetone, etc., as this may damage the surface of the appliance.

-

If you are not going to use the appliance for an extended period of time,

remove the adapter from the wall outlet and store the appliance in a

safe, dry location where it will not be crushed, banged, or subject to

damage.

-

Do not wrap the cord around the appliance when storing it.

Recycling

-

This symbol means that this product shall not be disposed of with normal

household waste (2012/19/EU).

-

Follow your country's rules for the separate collection of electrical and

electronic products. Correct disposal helps prevent negative

consequences for the environment and human health.

19

English

Accessories and spare parts

-

This appliance has no user-serviceable parts inside.

-

The light source of this luminaire is not replaceable; when the light source

reaches its end of life the whole luminaire shall be replaced.

-

To buy accessories or spare parts, visit www.shop.philips.com/service or

go to your Philips dealer. You can also contact the Philips Consumer Care

Center in your country (see the international warranty leaflet for contact

details).

The following accessories are available:

-

Adapter HF20 EU-version: service code 4222 039 6746 1

-

Adapter HF20 UK-version: service code 4222 039 6748 1

Troubleshooting

This chapter summarizes the most common problems you could encounter

with the appliance. If you are unable to solve the problem with the

information below, visit www.philips.com/support for a list of frequently

asked questions or contact the Consumer Care Center in your country.

Connectivity troubleshooting

Problem

Solution

I cannot download the

app on my smartphone.

The app is available for Android and IOS smartphones. The app is not

available for Windows phones.

I cannot connect my

Wake-Up Light to my

home-Wi-Fi network,

what should I do?

If you cannot connect your Wake-Up Light to your home Wi-Fi network and

still see the flashing icon for access point mode , it could be one of

following issues:

1. Wrong password. Make sure that you entered the correct Wi-Fi network

password and try again.

2. Is your router suitable for connection with your Wake-up Light? Your

router must have a 2.4 GHz band to communicate with the appliance. For

the first time setup make sure your smartphone and the appliance are both

connected to the same 2,4 GHz Wi-Fi network, otherwise you will not be

able to connect the appliance and your smartphone. The appliance cannot

connect to a 5 Ghz network. Temporarily switch off the 5 Ghz network to

connect the appliance to 2.4 Ghz network. Afterwards you can switch on the

5 Ghz network again.

3. Check the signal strength of the Wi-Fi. If the signal is weak, the appliance

cannot connect properly. Move the appliance closer to the router to make

sure that a good Wi-Fi signal is available.

4. If the previous steps are not the issue, contact the Philips consumer Care

Center in your country.

20

English

Problem Solution

Connecting my

connected Sleep &

Wake-Up Light to a Wi-

Fi guest network does

not work.

Within a Wi-Fi guest network, different devices (e.g. your smartphone and

connected Sleep & Wake-Up Light) are often not allowed to communicate

with each other. You will see the flashing icon for access point mode on

the display of the appliance.

If you want to change this setting within your own Wi-Fi guest network,

enable universal Plug and Play (uPnP) on your router.

I cannot use the app to

set alarms or control the

connected Sleep &

Wake-Up Light.

First, check if your Sleep & Wake-Up Light is connected to a Wi-Fi network.

If you completed the Wi-Fi Setup through the Philips SleepMapper app and

connected your appliance to a specific Wi-Fi network, you should see a

steady Wi-Fi symbol on the display of the appliance .

First check if Wi-Fi on your smartphone and router are enabled. If you see

the Wi-Fi disabled icon on the display of the appliance, enable Wi-Fi first

(see 'Wi-Fi').

-

Your smartphone could have reconnected to a different Wi-Fi network.

Make sure that your smartphone and appliance are connected to the

same home Wi-Fi network.

If you see the Wi-Fi connection issue icon , it could be one of the

following issues.

1. Check the settings for your home Wi-Fi network on the router. It could be

that universal Plug and Play (uPnP) is not enabled on your router. Enable

this setting on the router.

2. Check the signal strength of the Wi-Fi. If the signal is weak, the appliance

cannot connect properly. Move the appliance closer to the router to make

sure that a good Wi-Fi signal is available.

3. You might have changed the home Wi-Fi password or installed a new

router (see 'Easy Wi-Fi setup').

How do I remove my

personal Wi-Fi settings

and alarms from the

connected Sleep &

Wake-Up Light?

Go back to default settings by pressing the end of a paperclip into the reset

button on the back of the appliance (see 'General description').

I want to connect my

new smartphone to my

connected Sleep &

Wake-Up Light. What do

I need to do?

Please install the app again on your new smartphone. Indicate in the app

that you already installed the connected Sleep & Wake-Up Light and follow

the instructions in the app.

General troubleshooting

Problem

Solution

The icon on the display

or the light on the

appliance does not

respond when I try to

set different functions.

Go back to default settings by pressing the end of a paperclip into the reset

button on the back of the appliance (see 'General description'). Check if this

solves the problem. If the appliance still does not work, contact Philips

Consumer Care center in your country. Please note that all personal settings

(set alarm etc.) will be removed by going back to default settings.

21

English

Problem Solution

The lamp does not go

on when the alarm goes

off.

Perhaps you set a light intensity level that is too low. Increase the light

intensity level in your wake-up profile.

Perhaps you turned off the alarm function. The alarm icon is visible on the

display when the alarm is active (see 'Set wake-up profile').

The lamp does not go

on right away when I

switch it on.

It may take between 1 to 5 seconds for the lamp to go on, depending on the

set light intensity level.

I do not hear the alarm

sound when the alarm

goes off.

Perhaps you set a sound level that is too low. To set a higher sound level,

increase the volume level of the wake-up sound in your wake-up profile.

When you have set an alarm, you will first see the light of the wake-up

curve. The alarm sound only starts playing when the set alarm time has

been reached. You can change the duration of the wake-up light curve.

If you selected the FM radio as the alarm sound, turn on the FM radio after

you turn off the alarm to check if the FM radio works.

Check if your FM radio is correctly tuned to a radio station. If necessary,

adjust the frequency. If the radio still does not work, contact the Philips

consumer Care Center in your country.

The FM radio does not

work or makes a

crackling sound.

Check if the FM radio is correctly tuned to a radio station. If necessary,

adjust the frequency.

Change the position of the antenna by moving it around. Make sure that

you have unwound the antenna completely.

Perhaps the broadcast signal is weak. Adjust the frequency and/or change

the position of the antenna by moving it around. Make sure you have

unwound the antenna completely.

The alarm went off

yesterday, but it did not

go off today.

Perhaps you turned off the alarm function or only set the alarm for one day.

The alarm icon is visible on the display when the alarm is due within 24

hours.

In the Philips SleepMapper app you have several options to set alarms;

perhaps the alarm was not set correctly. Check if you have set the alarm in

the app correctly. Make sure your appliance and the app are connected to

the same home Wi-Fi network when you set an alarm.

I wanted to snooze, but

the alarm did not go off

again after 9 minutes.

You might have accidentally pressed the icon on the display to dismiss the

alarm . This deactivates the alarm for that day. Tap the top of the

appliance to snooze (see 'Snoozing').

The light wakes me too

early or too late.

Perhaps the light intensity level you have set is not appropriate for you. Try

a lower light intensity level if you wake up too early or a higher intensity

level of you wake up too late. You can also change the duration of the

wake-up curve. If light intensity 1 is not low enough, move the appliance

further away from the bed. If the light intensity is not high enough to wake

you, make sure that the light of the appliance is not blocked by any object

and the appliance is nearby.

22

English

Sidan laddas...

Philips HP3506/06 Användarmanual

Philips HP3506/06 Användarmanual

på andra språk

Relaterade papper

Andra dokument