Simplicity 1695845 Användarmanual

Kategori
Snöslungor
Typ
Användarmanual
Walkbehind Snowthrower
1750699
Revision -
en
Operator’s Manual
Bedienungsanleitung
de
Manuale dell’Operatore
fr
Brukerhåndbok
it
no
Manuel d’utilisation
sv
Instruktionsbok
Mfg. No. Description
1695844 Dual Stage Snowthrower, L1528EX 14.5TP 28” (71 cm)
1695845 Dual Stage Snowthrower, L1730EX 16.5TP 30” (76 cm)
Not for
Reproduction
2
Not for
Reproduction
3
B
1
2
A B
C
3
A
4
E
A
B
D
C
5
A
B
Not for
Reproduction
4
6
A
D
C
D
B
7
A
C
B
2825094
8
1
2
Free-Hand
TM
Control
10
D
A
C
B
E
1739331
2860694
1931317
9
Not for
Reproduction
5
FULL
14
A
11
12
A
B
13
15
D
C
E
B
A
Not for
Reproduction
6
19
A
16
A
17
A
B
18
A
B
20
A
B
B
21
C
A
B
22
B
A
C
C
Not for
Reproduction
7
Full
23
A
25
A
B
C
26
B
A
27
A
B
C
A
28
24
A
Not for
Reproduction
8
34
1/32”
(0.8mm)
A
35
D
E
A
C
B
F
B
C
1/2” (12.5mm)
Deflection
8
3
.030 in.
(.76 mm)
29
30
B
A
32
A
33
.03-.06 in.
(0,76-1,5 mm)
Screw
A B
C
31
B
A
Not for
Reproduction
9
38
37
A
36
A
Not for
Reproduction
10
Not for
Reproduction
11
CONTENTS
Illustrations ...........................................................................................3
Operator Safety......................................................................................12
Assembly.............................................................................................18
Features and Controls..............................................................................19
Operation.............................................................................................21
Maintenance.........................................................................................25
Storage ...............................................................................................30
Troubleshooting .....................................................................................31
Warranty .............................................................................................33
Specifications .......................................................................................34
General Information
Thank you for purchasing this quality-built Simplicity snowthrower. We’re pleased that you’ve placed your confidence in the Simplicity
brand. When operated and maintained according to the instructions in this manual, your Simplicity product will provide many years of
dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with snowthrowers and how to avoid
them. This snowthrower is designed and intended only for snow throwing and is not intended for any other purpose. It is important that
you read and understand these instructions throughly before attempting to start or operate this equipment. This snowthrower requires
final assembly before use. Refer to the Assembly section for instructions on final assembly procedures. Follow the instructions
completely. Save these instructions for future reference.
Record your model name/number, manufacturer’s identification
numbers, and engine serial numbers in the space provided for
easy access. These numbers can be found in the locations
shown.
When contacting your authorized dealer for replacement
parts, service, or information you MUST have these numbers.
A. Manufacturer’s Identification Number
B. Manufacturer’s Serial Number
C. Power Rating in Kilowatts
D. Maximum Engine Speed in Rotations per Minute
E. Manufacturer’s Name and Address
F. Year of Manufacture
G. CE Compliance Logo
H. Mass of Unit in Kilograms
I. Guaranteed Sound Power in Decibels
Part No. xxxxxxx
xxxxxxxxxxxxxxx
Serial No. xxxxxxxxxx
20xx
kW: x.xx
xxxx max
xxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxx
xxx dB
kg: xxx
A
B
C
D
E
F
G
H
I
PRODUCT REFERENCE DATA
Model Description Name/Number
Unit MFG Number Unit SERIAL Number
Mower Deck MFG Number Mower Deck SERIAL Number
Dealer Name Date Purchased
ENGINE REFERENCE DATA
Engine Make Engine Model
Engine Type/Spec Engine Code/Serial Number
CE Identification Tag
Product Reference Data
The Illustrated Parts List for this machine can be downloaded from www.simplicitymfg.com. Please provide model and serial number
when ordering replacement parts.
Copyright © 2010 Briggs & Stratton Power Products Group, LLC
Milwaukee, WI, All rights reserved.
SIMPLICITY is a trademark of Briggs & Stratton Power Products
Group, LLC Milwaukee, WI USA.
Not for
Reproduction
12
OPERATOR SAFETY
www.simplicitymfg.com
Hazard Symbols and Meanings
Rotating
Impeller
Control Symbols on Equipment
1
2
Free-Hand™ Control
Easy-Turn™ Traction Control
NOTE: Not all control symbols shown on this page will
appear on your snowthrower. See Features and Controls
section for the applicable symbols.
Oil
Fuel
Fuel
Shutoff
Choke
Off
Choke
On
Stop
Slow
Fast
Auger
Clutch
Electric
Start
Engine
On-Off
Choke-
Run
Traction
Control
Auger
Control
Discharge
Chute
Chute
Deflector
Heated
Hand
Grips
Rotating
Auger
Rotating
Parts
Fire
Shock
Hot
Surface
Safe
Distance
Rotating
Gears
Thrown
Objects
Explosion
Tox ic
Fumes
Ear
Protection
Eye
Protection
Moving
Parts
Kickback
Hazardous
Chemical
Forward
Neutral
Reverse
Engine
Primer
STOP
Engine
Run
Engine
Stop
Not for
Reproduction
OPERATOR SAFETY
13
The safety alert symbol and signal word (DANGER,
WARNING, CAUTION, or NOTICE) is used to indicate the likelihood
and potential severity of personal injury and/or damage to the
product. In addition, a hazard symbol may be used to represent the
type of hazard.
DANGER indicates a hazard which, if not avoided, will result
in death or serious injury.
WARNING indicates a hazard which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazard which, if not avoided, could
result in minor or moderate injury.
NOTICE indicates a situation that could result in damage
to the product.
DANGER
Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated with
snowthrowers.
This snowthrower is capable of amputating hands and feet,
and throwing objects. Read and observe all the safety
instructions in this manual. Failure to do so will result in
death or serious injury.
WARNING
Certain components in this product and its related accessories
contain chemicals known to the state of California to cause
cancer, birth defects, or other reproductive harm. Wash hands
after handling.
WARNING
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Be thoroughly familiar with the controls and the proper use of the
snow thrower.
Make sure you are properly trained before operating the
snowthrower.
Know how to stop the unit and disengage the controls quickly.
Never allow anyone to operate the snowthrower without proper
instruction.
Always follow the instructions in the operator’s manual, if the
snowthrower will be stored for an extende d period.
Maintain or replace safety and instruction labels as necessary.
Never attempt to make major repairs on the snowthrower unless
you have been properly trained. Improper servicing of the
snowthrower can result in hazardous operation, equipment
damage, and voiding of the product warranty.
DANGER
Read, understand, and follow all the
instructions on the snowthrower and in the
operator’s manual before operating this unit.
Failure to observe the safet y instructions in
this manual will result in death or serious
injury.
TO SAFELY CLEAR A CLOGGED DISCHARGE CHUTE
DANGER: Hand contact with the rotating impeller inside
the discharge chute is the most common cause of
injury associated with snowthrowers. Never use your
hands to clean out the discharge chute.
FOLLOW THESE INSTRUCTIONS:
1. Shut OFF the engine.
2. Wait 10 seconds to be sure the impeller blades have stopped
rotating.
3. Always use a clean-out tool, not your hands.
DANGER
Discharge chute contains rotating impeller to
throw snow. Never clear or unclog the
discharge chute with your hands. Fingers can
quickly become caught in the impeller. Always
use a clean-out tool.
Failure to observe these safety instructions
will result in traumatic amputation or severe
laceration.
Discharge Chute
Not for
Reproduction
WHEN ADDING FUEL
Turn off engine and let cool at least 3 minutes before removing the fuel
cap and adding fuel.
Fill fuel tank outdoors or in a well ventilated area.
Do not overfill the fuel tank. To allow for the expansion of gasoline, do not fill
above the bottom of the fuel tank neck.
Keep fuel away from sparks, open flames, pilot lights, heat, and other
ignition sources.
Check fuel lines, cap, and fittings frequently for cracks or leaks. Replace if
necessary.
Use an approved fuel container.
If fuel spills, wait until it evaporates before starting engine.
WHEN STARTING ENGINE
Ensure that spark plug, muffler, fuel cap, and air cleaner (if equipped) are in
place and secured.
Do not crank the engine with the spark plug removed.
If fuel is spilled, do not attempt to start the engine, but move the snow
thrower away from the area of the spill, and avoid creating any source of
ignition, until the fuel vapors have dissipated.
Do not over-prime the engine. Follow the engine starting instructions in this
manual.
If the engine floods, set choke (if equipped) to OPEN/RUN position, move
throttle (if equipped) to FAST position and crank until engine starts.
WHEN OPERATING EQUIPMENT
Do not tip the snowthrower at an angle which causes the fuel to spill.
Do not choke the carburetor to stop the engine.
Never run the engine with the air cleaner assembly (if equipped) or the air
filter (if equipped) removed.
WHEN CHANGING OIL
If you drain the oil from the top oil fill tube, the fuel tank must be empty or
fuel can leak out and result in a fire or explosion.
WHEN TRANSPORTING EQUIPMENT
Transport with fuel tank EMPTY, or with fuel shut-off valve OFF.
WHEN STORING GASOLINE OR EQUIPMENT WITH FUEL IN TANK
Store away from furnaces, stoves, water heaters, or other appliances that have
pilot light or other ignition source because they can ignite fuel vapors.
DANGER
Fuel and its vapors are extremely flammable and explosive.
Always handle fuel with extreme care.
Failure to observe these safety instructions can cause a fire
or explosion which will result in severe burns or death.
Fuel Handling
Keep the area of operation clear of all persons, particularly small children
and pets.
Thoroughly inspect the area where the snowthrower will be used and remove
all doormats, sleds, boards, wires, and other foreign objects.
Do not operate the snowthrower without wearing adequate winter clothing.
Wear footwear that will improve footing on slippery surfaces.
Use caution to avoid slipping or falling especially when operating the
snowthrower in reverse.
Never operate the snowthrower without good visibility or light. Always be
sure of your footing, and keep a firm hold on the handles.
Do not clear snow across the face of slopes. Use extreme caution when
changing direction on slopes. Do not attempt to clear steep slopes.
Do not overload the machine capacity by attempting to clear snow too
quickly.
Never operate the snowthrower at high transport speeds on slippery
surfaces. Look behind the snowthrower and use care when operating in
reverse.
Do not use the snowthrower on surfaces above ground level such as roofs of
residences, garages, porches, or other such structures or buildings.
Operators should evaluate their ability to operate the snowthrower safely
enough to protect themselves and others from injury.
The snowthrower is intended to remove snow only. Do not use the snow
thrower for any other purpose.
Do not carry passengers.
After striking a foreign object, shut OFF the engine, disconnect the cord on
electric motors, thoroughly inspect the snowthrower for any damage, and
repair the damage before restarting and operating the snowthrower.
If the snowthrower vibrates abnormally, shut OFF the engine. Vibration is
generally a warning of trouble. See an authorized dealer if necessary for
repairs.
For models equipped with electric starting motors, disconnect the power
cord after the engine starts.
DANGER
This snowthrower is only as safe as the operator. If it is
misused, or not properly maintained, it can be dangerous.
Remember you are responsible for your safety and that of
those around you.
Operation and Equipment Safety
OPERATOR SAFETY
14 www.simplicitymfg.com
Not for
Reproduction
Keep children out of the area during operation. Children are often attracted to
the equipment. Be mindful of all persons present.
Be alert and turn unit off if children enter the area.
Never allow children to operate the unit.
Use extra care when approaching blind corners, shrubs, trees, or other
objects that may obscure vision. Children may be present.
DANGER
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the operating activity. Never assume that children will
remain where you last saw them.
Children
Start and run engine outdoors.
Do not run the engine in an enclosed area, even if doors or windows are
open.
DANGER
Engines give off carbon monoxide, an odorless, colorless,
poison gas.
Breathing carbon monoxide can cause nausea, fainting,
or death.
Engine Safety
Disengage all clutches and shift into neutral before starting the engine.
Let the engine adjust to outdoor temperatures before starting to clear snow.
Use a grounded three-wire plug-in for all snowthrowers equipped with
electric drive motors or electric starting motors.
DANGER
Safe operation of the snowthrower requires the proper care
and maintenance of the engine. Failure to observe the safety
instructions in this manual will result in death or serious
injury.
Always wear safety glasses or eye shields while during operation, and while
performing an adjustment or repair.
Always be aware of the direction the snow is being thrown. Nearby
pedestrians, pets, or property may be harmed by objects being thrown.
Be aware of your environment while operating the snowthrower. Running
over items such as, gravel, doormats, newspapers, toys, and rocks hidden
under snow, can all be thrown from the chute or jam in the auger.
Use extreme caution when operating on or crossing gravel drives, walks, or
roads.
Adjust the collector housing height to clear gravel or crushed rock surface.
Never operate the snowthrower near glass enclosures, automobiles, window
wells, drop-offs, and the like without proper adjustment of the discharge
chute angle.
Familiarize yourself with the area in which you plan to operate the snow
thrower. Mark off boundaries of walkways and driveways.
DANGER
Objects can be picked up by auger and thrown from chute.
Never discharge snow toward bystanders or allow anyone in
front of the snowthrower. Failure to observe these safety
instructions will result in death or serious injury.
Thrown Objects
Whenever cleaning, repairing, or inspecting the snowthrower, make sure the
engine is OFF, spark plug wire is disconnected, and all moving parts have
stopped.
Do not put hands or feet near or under rotating parts. Keep clear of the
discharge opening at all times.
Never operate the snowthrower without proper guards, and other safety
devices in place and working.
Never leave the snowthrower unattended while engine is running. Always
disengage the auger and traction controls, stop engine, and remove keys.
Keep all loose clothing away from the front of the snowthrower and auger.
Scarves, mittens, dangling drawstrings, loose clothes, and pants can quickly
become caught in the rotating device and amputation will occur. Tie up
long hair and remove jewelry.
Run the machine a few minutes after discharging snow to prevent freeze-up
of the collector/impeller.
Disengage power to the collector/impeller when snowthrower is transported
or not in use.
DANGER
Keep hands, feet, and clothing away from rotating parts.
Rotating parts can contact or entangle hands, feet, hair,
clothing, or accessories.
Failure to observe these safety instructions will result in
traumatic amputation or severe laceration.
Moving Parts
OPERATOR SAFETY
15
Not for
Reproduction
OPERATOR SAFETY
16 www.simplicitymfg.com
When performing any maintenance or repairs on the snowthrower, shut OFF
the engine, disconnect spark plug wire, and keep the wire away from the
plug to prevent someone from accidently starting the engine.
Check shear bolts and other hardware at frequent intervals for proper
tightness to be sure the snowthrower is in safe working condition.
Keep nuts and bolts tight and keep snowthrower in good condition.
Never tamper with safety devices. Check their proper operation regularly and
make necessary repairs if they are not functioning properly.
Components are subject to wear, damage, and deterioration. Frequently
check components and replace with recommended parts, when necessary.
Check control operation frequently. Adjust and service as required.
Use only factory authorized replacement parts or like parts when making
repairs.
Always comply with factory specifications on all settings and adjustments.
Only authorized service locations should be utilized for major service and
repair requirements.
Use only attachments and accessories approved by the factory (such as
wheel weights, counterweights, or cabs).
Never attempt to make any adjustments while the engine is running (except
when specifically recommended by the factory).
Do not allow grease or oil to contact the rubber friction wheel or the disc
drive plate. If the disc drive plate or friction wheel come in contact with
grease or oil, damage to the rubber friction wheel will result.
WARNING
This snowthrower must be properly maintained to ensure safe
operation and performance. Failure to observe the safety
instructions in this manual could result in death or serious
injury.
Maintenance and Storage
-
If there is natural or LP gas leakage in area, do not start engine.
Do not use pressurized starting fluids because vapors are flammable.
WARNING
Starting engine creates sparking.
Sparking can ignite nearby flammable gases.
Explosion and fire could result.
Engine Safety (Continued)
DANGER: READ OPERATOR’S
MANUAL.
Read the Operator’s Manual for
operating and safety instructions.
DANGER: THROWN OBJECTS
HAZARD.
Never direct discharge chute
towards persons or property. Keep
bystanders away.
DANGER: REMOVE KEY BEFORE
SERVICING.
Shut off engine and remove key
before performing maintenance or
repair work.
DANGER: AMPUTATION HAZARD.
Contact with auger will cause
serious injury. Keep hands, feet, and
clothing away. Keep bystanders
away.
DANGER: AMPUTATION HAZARD.
Contact with moving parts inside
chute will cause serious injury. Shut
off engine before unclogging
discharge chute. Use clean-out tool,
not hands!
SAFETY ICONS
Never touch a hot engine or muffler. Allow muffler, engine cylinder, and fins
to cool before touching.
Remove debris from muffler area and cylinder area.
Install and maintain in working order a spark arrester before using equipment
on forest-covered, grass-covered, or brush-covered unimproved land.
It is a violation of California Public Resource Code, Section 4442, to use or
operate the engine on any forest-covered, brushcovered, or grass-covered
land unless the exhaust system is equipped with a spark arrester, as defined
in Section 4442, maintained in effective working order. Other states or federal
jurisdictions may have similar laws. Contact the original equipment
manufacturer, retailer, or dealer to obtain a spark arrester designed for the
exhaust system installed on this engine.
WARNING
Running the engine produces heat. Engine parts, especially
muffler, become extremely hot.
Failure to observe these safety instructions could result in
severe thermal burns on contact.
Not for
Reproduction
17
Safety Decals
Look for this symbol to indicate important safety
precautions. This symbol indicates: “Attention!
Become Alert! Your Safety Is At Risk.”
Part No. 1727207
Chute Control Icons
Part No. 1733772
Shift Decal
Part No. 1737867
Auger Control Icons
Product ID Number &
Serial Number Decal
(Rear of Motor Box)
WARNING: If any safety decals become worn or
damaged and cannot be read, order replacement decals
from your local dealer.
Engine Warning Icons
Part No. 276925
Part No. 1737869
Auger Control Decal
Part No. 1737870
Traction Control Decal
OPERATOR SAFETY
Before operating your snowthrower, read the safety decals as
shown on your snowthrower. The cautions and warnings are
for your safety. To avoid a personal injury or damage to your
snowthrower, understand and follow all the safety decals.
Part No. 1738282
Main Dash Decal
Not for
Reproduction
18
ASSEMBLY
www.simplicitymfg.com
CHECK THE TIRES
Check tires for damage. Check the air pressure in the tires with an
accurate gauge. See the sidewall of the tire for the proper inflation.
CAUTION: Avoid Injury! Explosive separation of tire
and rim parts is possible when they are serviced
incorrectly.
• Do not attempt to mount a tire without the proper
equipment and experience to perform the job.
• Do not inflate the tires above the recommended
pressure.
• Do not weld or heat a wheel and tire assembly. Heat can
cause an increase in air pressure resulting in an
explosion. Welding can structurally weaken or deform
the wheel.
• Do not stand in front or over the tire assembly when
inflating. Use appropriate tool that allows you to stand
to one side.
NOTICE: Check side of tire for maximum tire pressure. DO
NOT exceed maximum.
TOOLS REQUIRED FOR ASSEMBLY
1 Knife
2 1/2" Wrenches (or adjustable wrenches)
1 7/16” Wrenches (or adjustable wrenches)
1 Wrench (or adjustable wrench)
1 Pair pliers or screw driver (to spread cotter pin)
1 Hammer
1 Pry Bar
CHECK CABLE CONNECTION AND ADJUSTMENT
The traction control cable (A
A
, Figure 5) and auger control cable (B
B
) are
adjusted at the factory and no adjustment should be necessary.
If the cables become stretched, unattached or begin to sag, adjustment
will be necessary. See MAINTENANCE section of this manual.
INSTALL THE SPEED CONTROL ROD
Attach the ball joint (A
A
, Figure 4), located on the bottom end of the speed
control rod (B
B
), to the shift yoke assembly (C
C
) with 5/16" lock washer (D
D
)
and 5/16" nut (E
E
).
INSTALL THE DISCHARGE CHUTE
1. Place discharge chute (A
A
, Figure 6) over tabs on chute ring (B
B
) as
shown.
2. Secure discharge chute with three carriage bolts (C
C
) and nuts (D
D
).
3. Tighten hardware to 66 in-lbs (7.6 Nm).
NOTE: Check all bolts and nuts in flange for tightness. Do not
over-tighten.
NOTE: If the chute rotation is slow or binding, loosen the
chute rotation screw 1/4 turn.
WARNING: Always wear safety glasses or eye shields
when assembling the snowthrower.
UNPACK THE SNOWTHROWER
1. Using knife, cut along the dotted lines around the top of the carton.
Then remove top of carton as shown in Figure 1.
2. Using knife, cut along the dotted lines around the bottom of the
carton.
3. Push snowthrower off the bottom of the carton to proceed with
assembly.
PARTS BAG CONTENTS
1 Shear Bolt Kit, 1/4-20 x 1-3/4 in.
1 Bag of Shear Bolts
1 Screw, 1/4-20 x 1-3/4 in.
1 Spacer, Sleeve, 1/4 in.
1 Hex Locknut, 1/4-20
NOTE: “Right” and “Left” are from the Operating Position.
ASSEMBLE THE HANDLES
1. Raise the upper handle (A
A
, Figure 2) to the operating position.
2. Guide speed control rod over wheel.
3. Remove blue shipping tape from cables and cut orange zip ties that
secure control cables to handle assembly and chute rotation parts.
NOTE: Make sure the “Z bend ends of the control lever cables
are secured in the holes on the control levers (A, Figure 3).
Be careful not to cut or damage the control cables. Make sure
the cables are not caught between the upper and lower
handle.
4. Slide two carriage bolts (B
B
, Figure 2) into lower holes and fasten with
two 5/16" lock nuts (C
C
). Tighten all four carriage bolts and nuts with a
1/2" wrench or deep socket.
INSTALL THE DRIFT CUTTERS
Drift cutters are used to cut a path through snow deeper than the auger
housing.
1. On each side of the auger housing, insert carriage bolt (A
A
, Figure 7)
through upper hole.
2. Insert lower tab of drift cutter (B
B
) into lower hole.
3. Secure with wing nuts (C
C
).
DEFLECTOR CABLE ROUTING AND CLIP
INSTALLATION
See Figures 8 and 9 for instructions.
Not for
Reproduction
19
FEATURES AND CONTROLS
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to use one of six (6)
forward and two (2) reverse speeds. To shift, move speed select lever to
desired position.
NOTICE: Do not move speed select lever while Traction Control is
engaged. This may result in severe damage to the drive system.
B. Auger Control Lever — Used to engage and disengage the auger and im-
peller. To engage push down, to disengage release.
C. Chute Rotation Swtich — Used to rotate the discharge chute to the left or
right.
D. Chute Deflector Switch — Used to control the angle of the chute deflector
(up or down).
E. Free-Hand
TM
Control — After engaging the traction control (left hand) and
auger control (right hand), allows the operator to release the auger control
lever to use the other controls.
Snowthrower Controls
F. Easy-Turn
TM
Traction Control — When engaged, allows the operator to
release the left traction wheel, but allows the right wheel to continue driving
for easy turning.
G. Traction Control Lever — Used to propel snowthrower forward or re-
verse. Push down to engage, release to disengage.
H. Skid Shoe — Used to adjust the ground clearance of the auger
housing.
I. Clean-Out Tool — Used to remove snow and debris from the discharge
chute and the auger housing.
J. Headlight — Used to operate the snowthrower in poor lighting conditions.
B
A
C
G
1
2
H
I
E
F
D
J
Not for
Reproduction
20
FEATURES AND CONTROLS
www.simplicitymfg.com
ENGINE CONTROLS
A. Choke Control Knob — Used to start a cold engine.
B. Electric Start Button Used to start the engine using the electric
starter.
C. Primer Button — Used to inject fuel directly into the carburetor
manifold to ensure fast starts in cool weather.
D. On/Off Key - Turn to the ON position to start engine, or turn to the
OFF position to stop the engine.
E. Starter Cord Handle — Used to start the engine manually.
F. Throttle Control Lever — Used to control engine speed. For best
performance, the throttle control should be set to the FAST position.
Use the SLOW position only for warming the engine.
G. Fuel Shut-Off Valve — Used to turn the fuel supply off for out-of-
season storage.
H. Fuel Tank and Cap — Fill the fuel tank to approximately 1-1/2 in.
(38 mm) below the top of the neck to allow for fuel expansion.
I. Oil Fill Cap (Extended Dipstick)
Engine Controls
G
E
F
D
A
B
I
H
C
Not for
Reproduction
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156

Simplicity 1695845 Användarmanual

Kategori
Snöslungor
Typ
Användarmanual