AIPTEK POCKET DV8300 Bruksanvisning

82-420-90010v1.0

User's Manual

English

1

Welcome

Dear user, thanks for purchasing this product.

Much investment in time and effort has gone into its development,

and it is our hope that it will give you many years of trouble-free service.

Safety Notice

1. Do not drop, puncture or disassemble the

camera; otherwise the warranty will be voided.

2. Avoid all contact with water, and dry hands

before using.

3. Do not expose the camera to high temperature

or leave it in direct sunlight. Doing so may

damage the camera.

4. Use the camera with care. Avoid pressing hard

on the camera body.

5. For your own safety, avoid using the camera

when there is a storm or lightning.

6. Do not use batteries of different speciﬁcations.

Doing so may lead to the potential for serious

damage.

7. Remove the battery during long periods

between usage, as a deteriorated battery may

affect the functionality of the camera.

8. Remove the battery if it shows signs of leaking

or distortion.

9. Use only the accessories supplied by the

manufacturer.

10. Keep the camera out of the reach of infants.

2

Table of Contents

Welcome .......................................................................... 1

Safety Notice ................................................................... 1

Table of Contents ...........................................................

2

Getting Started ................................................................ 4

Knowing your camera parts .................................................................. 4

Installing the battery ............................................................................. 5

Using the charger ................................................................................. 6

Inserting a memory card (optional) ....................................................... 7

Attaching the carrying strap .................................................................. 8

Basic Operations ............................................................ 9

Turning on your camera ........................................................................ 9

Turning off your camera ........................................................................

9

Using the LCD monitor ......................................................................... 10

Reading LCD indicators ........................................................................ 11

Setting time and language .................................................................... 12

Recording a video clip .......................................................................... 13

Tak

ing a still picture .............................................................................. 15

Recording a voice clip .......................................................................... 16

Recording TV program or DVD .............................................................

17

Playing back your recordings ............................................................... 18

Playing MP3 music ............................................................................... 19

Connecting the camera to a TV ............................................................

21

Advanced Operations .................................................... 22

Menu operation ..................................................................................... 22

Menu illustration ................................................................................... 22

Menu items in Camera mode ............................................................... 23

Menu items in Playback mode .............................................................. 27

Menu items in MP3 mode ..................................................................... 28

3

Table of Contents

Menu items in Voice mode ................................................................... 28

Menu items in Setting mode ................................................................. 29

Copying Files to Your PC ............................................... 32

Installing the driver to your PC ............................................................. 32

Connecting the camera to your PC ...................................................... 34

Copying ﬁles to the PC .........................................................................

35

Viewing/Playing ﬁles on your PC ..........................................................

37

File location .......................................................................................... 38

Using PC Camera ........................................................... 39

Installing the software ........................................................................... 39

Starting the application ......................................................................... 39

Using the PC Camera ........................................................................... 42

Appendix:A ..................................................................... 45

Troubleshooting .................................................................................... 45

Flicker Settings ..................................................................................... 48

System Message .................................................................................. 48

Storage Capacity .................................................................................. 49

Battery Life Indicator ............................................................................. 50

Battery Life ........................................................................................... 50

Appendix:B ..................................................................... 51

Instruction for ArcSoft MediaConverter™ ............................................. 51

Appendix:C ..................................................................... 59

Speciﬁcations ....................................................................................... 59

Appendix:D ..................................................................... 60

System Requirements .......................................................................... 60

4

Getting Started

Knowing your camera parts

SD/MMC card slot

(inside the battery cover)

Bottom view

Tripod socket

Front LED indicator

Battery cover

Flash strobe

Lens

Microphone

Speaker

Strap hook

Power button

Direction buttons

Earphone connector

Next button/

Fast forward button

LCD monitor

Record button

Menu button

Mode button

Shutter button

Focus switch

Previous button/

Fast backward button

Play/Pause button

Zoom in button

Zoom out button

White balance button

Flash button

OK key

USB connector/

TV OUT connector

AV IN connector

5

Installing the battery

1 Open the battery cover.

Slide the battery cover open as indicated.

2 Install the battery.

Place the accessory Li-Ion battery into the

compartment. Note that the metallic contacts

must be aligned with the contacts in the

compartment.

3 Replace the cover.

After the battery is properly installed, replace

the battery cover.

Treat the Li-Ion battery with care:

• Keep the battery away from ﬁre or high-temperature environment

(over 140ºF or 60ºC).

• Do not drop the battery or try to disassemble it.

• If the battery is not used for long periods, fully discharge and

charge the battery at least once a year to maintain its lifecycle.

Upon using the battery for the ﬁrst time, you are recommended to

fully discharge and then charge the battery to ensure its lifecycle.

Purchasing additional batteries:

This camera uses one 8210 Li-Ion battery as power source. You

can purchase the 8210 Li-Ion Rechargeable battery (3.7 volt;

850mAh) at your local shop.

6

Using the charger

The battery attached is not fully charged. Please charge the

battery at least 4 hours for ﬁrst time use.

1 Connect one end of the supplied AC adapter to the

charger stand and the other end to a wall outlet.

2 Place the depleted battery pack into the charger.

Note that the metallic contacts must be aligned with the contacts in the

charger.

Charging indicator

Power indicator

To a wall outlet

Battery pack

3

The charging indicator turns red and the charge

starts

.

4 When the charging indicator turns green, the battery

pack is fully charged

.

This charger can only be used to charge the accessory battery

pack. Do not use it to charge other unknown batteries.

When in use, do not place the charger near ﬁre or in an enclosed

area that retains heat.

7

In addition to the built-in ﬂash

memory, your camera can store data

on a Secure Digital (SD) card or a

MultiMedia card (MMC).

To insert a memory card, do the

followings:

(1) Open the battery cover.

(2) Gently push the card as indicated

until the card reaches the bottom

of the slot.

To remove the memory card, gently

push the card and it will pop up. Then

pull the card out of the slot.

Write protection

The SD card comes with a

write-protect switch. When

the write-protect switch is set

to the Lock position, the card

will become non-writable. To

ensure that the camera can

operate normally, you should

set the write-protect switch

to the Unlock position before

inserting the SD card.

Inserting a memory card (optional)

Do not remove the memory card while the camera is processing

data (when the LED is blinking).

When a memory card is inserted, the camera will use the card

as the main storage medium. Files stored in the camera’s built-in

memory will become inaccessible until the card is removed.

8

Attaching the carrying strap

1 Thread one end of the strap into

the strap hook.

2 Thread the strap as illustrated

on the right.

9

Turning on your camera

Open the LCD monitor and the camera

will be automatically powered on.

OR

When the camera is powered off with

the LCD monitor open, press and hold

down the Power button for 1 second to

turn on the camera.

Turning off your camera

Press and hold down the Power button for 1 ~ 3 seconds to turn

off the camera.

OR

If the camera stays inactive for a long period of time, it may

automatically shut down due to the Auto-Off setting. See page

30 for more information.

If the camera is not turned on after pressing the Power button,

please check:

1. The battery pack is well installed in the camera.

2. The battery pack has enough power left.

Basic Operations

10

The LCD monitor can be used to

compose image settings for shooting,

to review recorded ﬁles, or to change

menu options.

The LCD monitor can be rotated to the

following positions:

1 Open the LCD monitor.

2 Rotate the LCD monitor.

The LCD monitor can be rotated up to 270

degrees as indicated. You can position the

panel at any angle to serve your ﬁlming

purpose.

Using the LCD monitor

When the LCD monitor is ﬂipped over, the previewed image on the

LCD will be automatically adjusted.

90°

180°

11

2.0 0008

Reading LCD indicators

Digital Camcorder mode:

2.0 0008

Battery Life

White balance

Photo resolution

Number of recordings

Selftimer

Zoom ratio

Storage medium*

1

Video resolution

Mode icon

Flash mode

*

1

This icon will change according to the storage medium you are using:

: internal memory.

: memory card.

Playback mode:

0001/0009

MPEG

Battery Life

Storage medium

Current / Total recordings

Image thumbnail

Highlight box

Mode icon

File type

Focus

12

Setting time and language

When you power on the camera for the ﬁrst time, you are

recommended to adjust the time and language settings.

1 Turn on the camera.

2 Press the Mode button and use the Direction buttons

to select the Setting ( ) mode. Then press the OK

key to enter.

3 Use the Direction buttons to select the Date & Time

(

30

) item.

4 Press the OK key or move the Direction buttons

toward right to enter the sub-menu.

5 Move the Direction buttons left or right to shift

between items. Move the Direction buttons up or

down to adjust the value. Press the OK key or right

key of the Direction buttons to conﬁrm the setting.

6 Press the Menu button or Mode button to return to

the menu, and then use the Direction buttons to

select the Language (

ABC

) item.

7 Press the OK key or move the Direction buttons

toward right to enter the sub-menu.

8 Use the Direction buttons to select a suitable

language and press the OK key to conﬁrm.

13

Recording a video clip

1 Adjust the focus.

Set the Focus Switch to an appropriate

setting. Normally, you should set the focus to

( ) for most ﬁlming conditions. Select (

) only for close-ups. The focus is adjustable

during recording.

70cm ~ (28” ~ )

50cm ~ 70cm (20” ~ 28”)

2 Zooming

Move the Direction buttons up or down

to zoom in or zoom out the screen. The

maximum magniﬁcation is 4

X.

The zoom function is also available during recording.

Adjust other advanced settings if necessary. See the section

“Advanced Operations” on page 22 for more information.

Zoom in

Zoom out

14

Recording a video clip (continued)

3 Press the Record button to start recording.

4 Press the Record button again to stop recording.

2.0 0008

00:00:07

Timer

15

Taking a still picture

1 Adjust the focus.

Set the Focus Switch to an appropriate

setting. Normally, you should set the focus

to ( ) for most ﬁlming conditions. Select (

) for scenery photos. Select ( ) only for

close-ups.

70cm ~ (28” ~ )

50cm ~ 70cm (20” ~ 28”)

2 Zooming

Use the Zoom button or Up/Down key to

zoom in or zoom out the screen.

Adjust other advanced settings

if necessary. See the section

“Advanced Operations” on page 22

for more information.

3 Press the Shutter button to take

a still picture.

Zoom in

Zoom out

16

Recording a voice clip

1 Press the Mode button and use the Direction buttons

to select the Voice (

) mode. Then press the OK

key to enter.

2 Press the Record button to start recording.

Before or during recording, you can move the Direction buttons

toward left or right to adjust microphone sensibility, thus setting the

sound volume of the recording.

3 When you are done, press the Record button again

to stop recording.

Avoid blocking the microphone

17

Recording TV program or DVD

The advanced MPEG-4 digital video recording technology

allowes you to record TV program via AV-IN cable.

Video Audio

AV-Mode

TV

AV-IN

1 Turn on your TV or DVD player.

2 Connect the AV cable to the AV-Out

terminal on the TV or DVD player.

(Normally, it’s not necessary to

switch the mode, please refer to

the User’s Manual of the TV or DVD

player.)

3 Turn on the camera.

4 Connect the other end of the AV

cable to the camera’s AV-IN terminal.

Make sure that the images displayed

on the TV or DVD player is also

displayed on the camera’s LCD

monitor.

5 Press the Record button to start

recording.

6 Press the Record button again to

stop recording.

There are two resolution

settings available for

recording videos: VGA

(640x480) and QVGA

(320x240).

VGA mode is suitable

for displaying on the TV,

but memory-consuming.

The recording time for

the 1GB memory card

can last approximately

1 hour.

QVGA mode is suitable

for displaying on the

small screen (such as

the LCD monitor). The

recording time for the

1GB memory card can

last approximately 2

hours.

For more information

on VGA and QVGA’s

settings, please refer to

page 25.

1

2

3

4

5

18

Playing back your recordings

1 Press the Mode button and use the Direction buttons to select

the Playback ( ) mode. Then press the OK key to enter. Or

press the Play/Pause button ( ) below the LCD monitor.

2 Operations in playback mode:

File type How to... Action

Index mode

0001/0009

MPEG

Full-screen mode

0001/0009

MPEG

Shift between index

mode and full-screen

mode

In index mode, press the OK key to switch to

full-screen mode. In full-screen mode, press the

Menu button to switch to index mode. (When

reviewing a picture, if you move the Direction

buttons down when the zoom ratio is 1.0x, the

screen will switch to index mode.)

Shift between ﬁles

1. In index mode: Use the Direction buttons to

move the highlight box.

2. In full-screen mode: Use the Direction

buttons to move left or right.

Picture

Zoom in/out Use the Direction buttons to move up or down.

Lock/Release zoom

ratio

When the zoom ratio is greater than 1.0x, press

the OK key.

Browse the enlarged

picture

When the zoom ratio is locked, use the

Direction buttons to browse the picture.

Video

&

Audio

Start playing

When selected (in full-screen mode), the ﬁle

automatically starts playing.

Pause/Resume

playing

During playing/While paused, press the OK key.

Adjust the volume

level

During playing, use the Direction buttons to

move up or down.

Stop playing During playing, press the Menu button.

Return to the preview

screen

Press the Shutter button.

Fast forward

During playing, press the Next ( ) button. To

stop, press the Play/Pause ( ) button.

Fast backward

During playing, press the Previous ( ) button.

To stop, press the

Play/Pause ( ) button.

Select the next ﬁle

While paused/stopped, press the Next ( )

button.

Select the previous ﬁle

While paused/stopped, press the Previous (

) button.

19

Playing MP3 music

Copy MP3 ﬁles to the camera

Before you can play MP3 music, you need to copy MP3 ﬁles to

the camera ﬁrst.

1 Connect the camera to your PC.

Turn on the camera, and connect the camera to a PC using the USB cable.

For details on connecting the camera to your PC, see page 34.

2 Copy ﬁles to the camera.

After the camera is connected to the PC, double-click on My Computer

and you will ﬁnd a removable disk. Create a “MP3” folder in the removable

disk, and then you can copy MP3 ﬁles into the folder for playing.

MP3 ﬁles must be placed in the “MP3” folder for playing.

To take advantage of the removable disk function, Windows 98SE

users may need to install the accessory driver. See page 32-33 for

details on the installation.

For MP3 files

Sidan laddas ...

AIPTEK POCKET DV8300 Bruksanvisning

Denna manual är också lämplig för

AIPTEK POCKET DV8300 Bruksanvisning

på andra språk

Relaterade papper

Andra dokument