Silvercrest 270744 Operating Instructions Manual

MINCER SFW 350 C1

MINCER

Operating instructions

KØDHAKKER

Betjeningsvejledning

KÖTTKVARN

Bruksanvisning

FLEISCHWOLF

Bedienungsanleitung

IAN 270744

VLEESMOLEN

Gebruiksaanwijzing

HACHOIR À VIANDE

Mode d’emploi

GB / IE Operating instructions Page 1

SE Bruksanvisning Sidan 19

DK Betjeningsvejledning Side 37

FR / BE Mode d’emploi Page 55

NL / BE Gebruiksaanwijzing Pagina 73

DE / AT / CH Bedienungsanleitung Seite 91

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med

apparatens / maskinens funktioner.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

Avant de lire le mode d’emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec

toutes les fonctions de l’appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het

apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

A

B

0

9

7

65

8

w

q

e

1

4

2

3

C

t

u

z

r

GB

│

IE

│

1 ■

SFW 350 C1

Index

Introduction ...................................................2

Copyright .............................................................. 2

Limited liability ........................................................... 2

Intended use ..................................................2

Items supplied / Component description ............................3

Technical data .................................................3

Safety instructions .............................................4

Assembly / Disassembly .........................................6

Assembling the meat grinder ................................................ 6

Assembling the sausage stuﬀer attachment .................................... 7

Assembling the kubbe attachment ............................................ 8

Assembling the biscuit attachments ........................................... 8

Operation ....................................................9

Operating the appliance ................................................... 9

Processing meat .........................................................10

Processing sausage meat .................................................. 10

Using the kubbe attachment ............................................... 11

Making biscuits .........................................................11

Non-functionality .............................................12

Cleaning .....................................................12

Cleaning the motor block .................................................12

Cleaning the accessories ..................................................13

Storage .....................................................13

Disposal .....................................................14

Warranty and Service .........................................14

Importer .....................................................15

Recipes ......................................................15

Kubbe ................................................................15

Fresh Grill Sausages .....................................................16

Biscuits ................................................................17

■ 2

│

GB

│

IE

SFW 350 C1

Introduction

Congratulations on the purchase of your new appliance.

You have clearly decided in favour of a quality product. These operating instructions

are a part of this product. They contain important information in regard to safety,

use and disposal. Before using the product, familiarise yourself with all of these

operating and safety instructions. Use the product only as described and only for

the speciﬁed areas of application. Retain these instructions for future reference. In

addition, pass these documents on, together with the product, to any future owner.

Copyright

This documentation is copyright protected.

Any copying or reproduction of it, including as extracts, as well as the reproduction

of images, also in an altered state, is only permitted with the written authorisation

of the manufacturer.

Limited liability

All technical information, data and instructions for the installation, connection

and operation contained in these operating instructions correspond to the latest

available at the time of printing and, to the best of our knowledge, take into

account our previous experience and know-how.

No claims can be derived from the details, illustrations and descriptions in these

instructions.

The manufacturer assumes no responsibility for damage caused by failure to ob-

serve these instructions, improper use, incompetent repairs, making unauthorised

modiﬁcations or for using unapproved replacement parts.

Intended use

This appliance is intended only for the preparation of food in quantities expected

in domestic households:

▯ Mincing fresh meat,

▯ Making sausages with natural or artiﬁcial sausage skin,

▯ Making biscuits

This appliance is not intended for the processing of frozen foods or other hard

foodstuﬀs, e.g. bones or nuts, or for use in commercial or industrial environments.

GB

│

IE

│

3 ■

SFW 350 C1

Items supplied / Component description

Figure A:

 Biscuit attachment with pattern strips

 Stodger

 Feeding tray

 Motor unit

 Meat grinder casing made of metal

 Transport screw

 Spring

 Cross blade

 Cutting discs for coarse and ﬁne mincing

 Ring clamp

- Sausage stuﬀer attachment

3 Sausage disc

! Kubbe attachment

Figure B:

. Locking button

Figure C:

0 “I” button

6 “0” button

1 “<” button

Technical data

Voltage 220 - 240 V ∼, 50 Hz

Power consumption 250 - 350 W

Protection class

II /

C.O. Time 15 minutes

C.O. Time

The C.O. Time (Continuous Operation) details how long an appliance may be

used without the motor overheating and being damaged. After the appliance has

run for this period it must be switched oﬀ until the motor has cooled itself down.

■ 4

│

GB

│

IE

SFW 350 C1

Safety instructions

RISK OF ELECTRIC SHOCK

► Ensure that the power cable does not become damaged. Pro-

tect the cable from heat and ensure that it cannot be trapped

or clamped.

► Arrange for damaged power cables and/or plugs to be

replaced as soon as possible by a qualiﬁed specialist or by

Customer Services.

► Use the appliance only in dry indoor areas, not outdoors.

Never immerse the motor block in water or any other

liquid! If you do, then you could receive a potentially

fatal electric shock.

WARNING!

► Never use the appliance for purposes other than those listed

here. There will be a major risk of serious accidents should

you try to neutralise the safety ﬁtments on the appliance!

WARNING! RISK OF INJURY!

► Never put your hand into the openings of the appliance. Do

not insert any objects of any kind into the openings – except

for the appropriate stodger and the foodstuﬀ to be processed.

If you do, there will be a serious risk of accidents!

► Unplug the appliance from the power source before attaching

or removing accessories.

► Do not leave the appliance unsupervised when it is ready

for use. To avoid it being switched on accidentally, always

unplug the appliance after use or during breaks.

► Only use the original accessory parts for this appliance.

Other accessories may not meet the safety requirements.

GB

│

IE

│

5 ■

SFW 350 C1

WARNING! RISK OF INJURY!

► Never operate the appliance in a no-load condition. This

could irreparably damage the appliance.

► Before changing accessories or additional parts that are in

motion during operation, the appliance must be switched oﬀ

and disconnected from mains power.

► Never use the appliance for purposes other than those

described in these instructions.

► Warning – the cross blade is very sharp! Always take care

when handling and cleaning the appliance.

► The appliance should always be disconnected from the

mains when unattended and before assembly, disassembly

or cleaning.

► This appliance may not be used by children.

► The appliance and its connecting cable must be kept away

from children.

► This appliance may be used by persons with limited physical,

sensory or mental capabilities or lack of experience and

knowledge, provided that they are under supervision or

have been told how to use the appliance safely and are

aware of the potential risks.

► The appliance must not be used as a plaything by children.

■ 6

│

GB

│

IE

SFW 350 C1

Assembly / Disassembly

CAUTION - PROPERTY DAMAGE!

► All accessories are coated with a thin ﬁlm of oil to protect them from corrosion.

Therefore, carefully clean all of the parts before using the appliance for the

ﬁrst time, as described in detail in the chapter "Cleaning". After subsequent

usage, always apply a light coating of cooking oil to the metallic components.

Assembling the meat grinder

Unfold the fold-out side. There you will ﬁnd the step-by-step illustrations for as-

sembling the appliance.

1) Place the transport screw  in the meat grinder casing .

2) Place the spring  onto the transport screw .

3) Then ﬁt the cross blade  on so that the sharp side points away from the

spring . Ensure that the square opening in the cross blade  is placed

correctly on the square axle.

WARNING! RISK OF INJURY!

► The cross blade  is very sharp! Risk of injury!

CAUTION - PROPERTY DAMAGE!

► The appliance will be damaged if the cross blade  is inserted the other

way around!

4) Select the appropriate cutting disc /sausage disc 3.

GB

│

IE

│

7 ■

SFW 350 C1

5) Place your selected cutting disc  into the meat grinder casing  so that

the ﬁxings on the cutting disc are located in the openings in the meat

grinder casing .

6) After everything has been correctly assembled, screw the ring clamp 

back on hand-tight.

7) The ready-assembled meat grinder casing  is connected by a bayonet

connector to the motor block :

– Insert the meat grinder casing  into the motor block  such that the

arrow on the meat grinder casing lies against the symbol

on the

motor unit . The locking button .presses itself in (Fig. B).

– Lightly press the meat grinder casing  in and at the same time turn

the feeding shaft on the meat grinder casing  into the middle position

(Fig. B) so that the arrow on the feeding shaft points to the symbol

.

When the meat grinder casing  engages, the locking button .

springs out.

– Finally, place the feeding tray  on top of the feeding funnel.

– To dismantle it, press the locking button .and turn the feeding funnel

to the right (Fig. B)

. You can now pull the meat grinder casing  out.

Assembling the sausage stuﬀer attachment

Unfold the fold-out side - there you will ﬁnd the step-by-step illustrations for as-

sembling the appliance.

1) Remove the meat grinder casing  as described under “Assembling the

meat grinder”.

2) Dismantle all parts which are ﬁtted to/in the meat grinder casing  and

clean them.

3) Coat all metal parts with cooking oil.

4) Put the transport screw , the spring  and the cross blade  back into

the meat grinder casing .

5) Insert the sausage disc 3 so that the ﬁxings on the sausage disc 3 are

located in the openings in the meat grinder casing .

6) Then place the sausage stuﬀer attachment - before the sausage disc 3.

7) Screw the ring clamp  on hand-tight.

8) Assemble the meat grinder casing  as described under “Assembling the

meat grinder”.

■ 8

│

GB

│

IE

SFW 350 C1

Assembling the kubbe attachment

Unfold the fold-out side. There you will ﬁnd the step-by-step illustrations for as-

sembling the appliance.

1) Remove the meat grinder casing  as described under “Assembling the

meat grinder”.

2) Disassemble any attachments that might be ﬁtted and clean the meat grinder

casing .

NOTICE

► For the kubbe attachment !, the cross blade  with the spring  is not

required! If need be, remove them both from the meat grinder casing .

3) Coat all metal parts with cooking oil.

4) Insert the two plastic parts of the kubbe attachment ! so that the ﬁxings on

the bottom kubbe attachment ! ring are located in the openings in the meat

grinder casing .

5) When everything has been attached correctly, screw the ring clamp  back

on hand-tight.

6) Assemble the meat grinder casing  as described under “Assembling the

meat grinder”.

Assembling the biscuit attachments

Unfold the fold-out side. There you will ﬁnd the step-by-step illustrations for as-

sembling the appliance.

1) Remove the meat grinder casing  as described under “Assembling the

meat grinder”.

2) Disassemble any attachments that might be ﬁtted and clean the meat grinder

casing .

NOTICE

► For the biscuit attachment , the cross blade  with the spring  is not

required! If need be, remove them both from the meat grinder casing .

3) Coat all metal parts with cooking oil.

4) Pull the pattern strips  away from the front of the biscuit attachment .

5) First place the plastic disc and then the metal disc of the biscuit attachment 

into the meat grinder casing  (see fold-out side). Insert the biscuit attach-

ment . so that the ﬁxings on the biscuit attachment . are located in the

openings in the meat grinder casing .

6) After everything has been correctly assembled, screw the ring clamp 

back on hand-tight.

GB

│

IE

│

9 ■

SFW 350 C1

7) Replace the pattern strips  back in to the front of the biscuit attachment .

Ensure that the grip on the pattern strips  points away from the appliance.

If it does not, you will not be able to adjust the pattern, which is located

directly on the grip.

8) Assemble the meat grinder casing  as described under “Assembling the

meat grinder”.

9) To dismantle it, you must ﬁrst remove the pattern strips  before you can

screw the ring clamp  open and take the biscuit attachment  back out.

Operation

RISK OF ELECTRIC SHOCK

► NEVER open the housing of the motor block  – it does not contain any

user-serviceable elements. If the housing is opened, the warranty becomes

void. If the housing is opened, there is a risk of receiving a potentially fatal

electric shock.

CAUTION - PROPERTY DAMAGE!

► Do not use the appliance for longer than 15 minutes continuously. To avoid

an overheating of the appliance, after such a period switch it oﬀ and allow

it to cool down for ca. 30 minutes.

► NEVER activate the buttons "I" 0 or "<" 1, during a change of rotation

direction, if the appliance motor has not come to a complete stop. This

could damage the motor.

Operating the appliance

Once the appropriate attachments have been ﬁxed:

1) Place the appliance where it will at all times be absolutely stable and under

no circumstances could it fall oﬀ of the work surface or in any way come into

contact with water (due to vibrations or becoming snagged in the power

cable). Vibration is unavoidable when it is working.

RISK OF ELECTRIC SHOCK

► Never touch an appliance, which is plugged in or is operational when it

happens, that falls or lands in water – or in the case of other emergencies!

First disconnect the appliance from the mains power source in all emergency

situations! Otherwise you run the risk of serious injury or loss of life!

2) Put the food which is to be processed in the feeding tray  and place a

catchment container at the front under the exit opening.

■ 10

│

GB

│

IE

SFW 350 C1

3) First press the button “0” 6to check that the appliance is still switched oﬀ.

Otherwise there is a risk that the appliance could unintentionally start

when the plug is inserted into the power socket.

4) Then insert the plug into a mains power socket.

5) Press the button “I” 0 to start the appliance.

WARNING! RISK OF INJURY!

► Push the foodstuﬀ into the feeding shaft ONLY with the round stodger  –

NEVER with one’s ﬁngers, forks, spoons or similar objects. That could lead

to physical injury and also damage the appliance.

CAUTION - PROPERTY DAMAGE!

► Do not ever press so hard that the motor gets audibly slower. This could

overburden the machine and damage it.

Processing meat

1) Use pieces of meat that ﬁt easily into the feeding funnel. If necessary, cut the

meat to size beforehand. Check that the meat does not have any bones and

or tendons.

WARNING!

► Minced meat is very prone to bacterial contamination. Therefore take care

to maintain good hygiene when processing meat. If you do not, it may

cause serious health problems.

2) When you have read and understood all of the instructions on the topic

”Meat“, you can now use the appliance as described in the chapter

“Operating the appliance”.

Processing sausage meat

1) Pass meat through the meat grinder twice before using it as sausage stuﬃng.

2) To make sausage stuﬃng, add some chopped onions, spices and other

ingredients to the minced meat, as per your recipe, and knead the mixture

well. Refrigerate this for 30 minutes before processing it further.

3) Pull one end of the sausage skin (natural or artiﬁcial sausage skin) onto the

sausage stuﬀer attachment - and tie a knot in the other end. For 1 kg of the

ﬁlling, you will need approximately 1.60 m of sausage skin.

GB

│

IE

│

11 ■

SFW 350 C1

TIP!

Soak the natural sausage skin in lukewarm water for about 3 hours before

using it and wring it out before attaching it. This will make the natural sau-

sage skin more elastic. Natural sausage skins are available from butcher

suppliers close to slaughter houses or from your family butcher.

4) The sausage mixture will be pressed into the sausage skin by the sausage

stuﬀer attachment -. When it is long enough switch the appliance oﬀ, press

the sausage together at the ends and rotate it a couple of times along its

longitudinal axis.

TIP!

Sausage meat tends to expand when cooked or frozen. Therefore, to

prevent it from bursting it is best not to overstuﬀ the sausage.

5) When you have read and understood all of the instructions on the topic

”Sausage”, you can now use the appliance as described in the chapter

“Operating the appliance”.

Using the kubbe attachment

With the kubbe attachment ! foodstuﬀs can be processed to form hollow rolls

of meat or vegetables, which can then be stuﬀed as desired.

1) First put the meat through the meat grinder twice before pressing it through

the kubbe attachment !.

2) When you have read and understood all of the instructions on the topic

“Kubbe-Attachment”, you can now use the appliance as described in the

chapter “Operating the appliance”.

Making biscuits

After you have made the biscuit pastry according to your recipe, and after having

ﬁxed the biscuit attachment :

1) Line a small baking tray with greaseproof paper and place or hold it directly

under the exit opening at the front of the appliance.

2) Press pastry evenly into the meat grinder casing  – the transport screw 

then pushes it through the selected design on the design motif strip of the

biscuit attachment .

3) When the biscuit is the required length, stop the appliance and break the

pastry oﬀ at the exit opening. Lay the biscuits on the baking tray.

4) When you have read and understood all of the instructions on the topic

“Biscuits”, you can now use the appliance as described in the chapter

“Operating the appliance”.

■ 12

│

GB

│

IE

SFW 350 C1

Non-functionality

If the drive is blocked by accumulated food:

■ Press the button “0” 6to stop the meat grinder.

■ Press and hold the button “<” 1. The appliance will now run in the reverse

direction. This enables you to transport the food which has become stuck a

short way backwards, and the motor to run freely again.

■ When the drive runs smoothly again, release the “<” 1button.

■ Press the button “I” 0to re-start the meat grinder.

■ If you do not succeed in getting the drive free with this, clean the appliance

as described in the chapter “Cleaning”.

Should the motor suddenly stop, it could be due to automatic

activation of the internal overload fuse. This is intended to

protect the motor.

■ Switch the appliance oﬀ and allow it cool down for approximately 30 minutes

before continuing to use it.

■ Should this not work, wait for a further 15 minutes.

■ If it still does not function at the end of this period, this indicates a technical

problem. In this case, contact the Customer Service Centre.

If the power cable is damaged or the accessories are

visibly damaged:

■ Immediately switch the appliance oﬀ by pressing the “0” 6 button!

■ If this is not possible without risk to personal safety, disconnect the plug from

the mains power socket.

■ Arrange for the defective parts to be repaired by Customer Services before

re-using the appliance.

Cleaning

RISK OF ELECTRIC SHOCK

► Disconnect the plug from the mains power socket before cleaning the appli-

ance. In this way accidents caused by the inadvertent switching on of the

appliance and electric shocks can be avoided.

Cleaning the motor block

■ Clean the exterior surfaces and the power cable with a slightly damp cloth.

Dry the appliance well before re-using it.

GB

│

IE

│

13 ■

SFW 350 C1

RISK OF ELECTRIC SHOCK

► Never immerse the motor block in water or any other liquid! Should this

occur, you are at risk of a potentially fatal electric shock if permeating

moisture makes contact with the electrical wiring.

CAUTION - PROPERTY DAMAGE!

► Never use detergents, abrasive cleaners or solvents. These could damage

the appliance and leave residues on the foodstuﬀs.

Cleaning the accessories

NOTICE

► Do not clean the accessories in a dishwasher! This could cause damage to

them!

■ Clean the accessories that could come in contact with foodstuﬀs, ...

– by hand only, the accessories are not dishwasher safe.

– with hot water and a household detergent suitable for use with foods.

WARNING! RISK OF INJURY!

► The cross blade  is very sharp! Risk of injury!

■ Dry all parts thoroughly, before re-using the appliance.

NOTICE

► Apply a light coating of cooking oil to all metallic components after each

cleaning Otherwise, metal parts can discolour!

Storage

■ Push the power cable (but not the plug) into the cable storage shaft under

the appliance base. There it is protected from damage.

■ Store the appliance at a dry location.

■ After drying the metal attachments coat them lightly with a little cooking oil –

if you are not going to use the appliance immediately. This will protect them

from corrosion.

■ Store the appliance where it will be out of reach of children and people

requiring supervision. They are not always able to correctly assess the

potential risks involved with using electrical appliances.

■ 14

│

GB

│

IE

SFW 350 C1

Disposal

Do not dispose of the appliance in your normal domestic waste.

This product is subject to the provisions of European Directive

2012/19/EU (Waste Electrical and Electronic Equipment).

Dispose of the appliance through an approved disposal centre or at your com-

munity waste facility. Observe the currently applicable regulations. In case of

doubt, please contact your waste disposal centre.

Dispose of all packaging materials in an environmentally friendly manner.

Warranty and Service

The warranty for this appliance is for 3 years from the date of purchase. This appli-

ance has been manufactured with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim,

please make contact by telephone with our service department. Only in this way

can a post-free despatch for your goods be assured.

NOTICE

► The warranty covers only claims for material and manufacturing defects, not

for transport damages, worn parts or for damage to fragile components,

e.g. buttons or batteries.

The appliance is intended for domestic use only, NOT for commercial purposes.

If this product has been subjected to improper or inappropriate handling, abuse,

or modiﬁcations not carried out by one of our authorised sales and service

outlets, the warranty will be considered void.

Your statutory rights are not restricted in any way by this warranty. The warranty

period is not extended by repairs eﬀected under warranty. This applies also to

replaced and repaired parts.

Damages or defects discovered after purchase are to be reported directly after

unpacking, at the latest two days after the purchase date.

Repairs carried out after lapse of the warranty period are subject to charge.

The warranty period is not extended by repairs eﬀected under warranty.

This applies also to replaced and repaired parts.

Damages or defects discovered after purchase are to be reported directly after

unpacking, at the latest two days after the purchase date.

Repairs carried out after lapse of the warranty period are subject to charge.

GB

│

IE

│

15 ■

SFW 350 C1

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

IAN 270744

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 270744

Hotline availability: Monday to Friday 08:00 - 20:00 (CET)

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Recipes

Kubbe

Ingredients for the wrapping

450 g of lean Lamb, Veal or Beef

150 g Flour

1 Tsp Pimento (type of pepper)

1 Tsp Nutmeg

1 Pinch Chili powder

1 Pinch Pepper

Ingredients for the meat ﬁlling

700 g Mutton

1 1/2 Tbsp. Olive oil

1 1/2 Tbsp Onions, ﬁnely chopped

1/2 Tsp Pimento (type of pepper)

1/2 Tsp. Salt

1 1/2 Tbsp Flour

■ 16

│

GB

│

IE

SFW 350 C1

Pass the meat for the wrapping through the meat grinder twice (ﬁrst with the

coarse and then with the ﬁne cutting discs ) and then combine it with the

ingredients. Then pass this mixture through the meat grinder twice. Exchange

the cutting disc  for the Kubbe attachment ! (see chapter “ Assembling the

kubbe attachment”).

Shape the Kubbe wrappers with the Kubbe attachment ! and then freeze them.

Filling:

Pass the meat through the meat grinder twice (ﬁrst with the coarse and then with

the ﬁne cutting discs ). Saute the onions and then mix them well with the meat

and other ingredients. Fill the Kubbe wrappers and fry until done.

Alternative Fillings:

250 g steamed Broccoli

or 250 g steamed Zucchini

or 250 g cooked Rice

Fresh Grill Sausages

Ingredients:

300 g lean Beef

500 g lean Pork

200 g Shoulder bacon

20 g Salt

1/2 Tsp ground white Pepper

1 Tsp Caraway

1/2 Tsp Nutmeg

Pass the beef, pork and bacon through the meat grinder twice.

Add the mixed spices and salt and thoroughly knead for 5 minutes.

Place the sausage ﬁlling in the refrigerator for ca. 30 minutes. Fill the skins with

sausage meat as detailed (see chapter “Preparing sausage”) and make sausages

of ca. 25 cm in length.

Grill the sausages well and eat them on the same day.

GB

│

IE

│

17 ■

SFW 350 C1

Biscuits

Ingredients:

500 g butter

500 g sugar

2 - 3 packets of vanilla sugar

1 packet of vanilla custard

1/4 tsp salt

1 egg

4 egg yolks

800 g plain ﬂour

2 tbsp baking powder

200 g ground (blanched) almonds

Zest of a lemon

Beat the butter until ﬂuﬀy. Add the remaining ingredients one after another and

knead well into the dough. Cover the ﬁnished dough and allow to stand for around

12 hours in the fridge (e.g. overnight). Then pass it through the meat grinder with

the biscuit attachment . Place the biscuits on a baking tray lined with baking

paper. Bake the biscuits in a pre-heated oven at 180°C for approx. 10 - 15 minutes

until golden brown.

Sidan laddas ...

Silvercrest 270744 Operating Instructions Manual

Denna manual är också lämplig för

Silvercrest 270744 Operating Instructions Manual

på andra språk

Relaterade papper

Andra dokument