Yamaha NU1X Bruksanvisning

Kategori
Digitala pianon
Typ
Bruksanvisning
FRANÇAIS
ESPAÑOL
ES
FR
EN
Owners Manual
Mode d'emploi
Manual de instrucciones
Before using this instrument, be sure to read “PRECAUTIONS”
on pages 5–6.
Avant d'utiliser cet instrument, lisez attentivement la section
« PRÉCAUTIONS D'USAGE » aux pages 5-6.
Antes de utilizar el instrumento, lea la sección
“PRECAUCIONES”, en las páginas 5-6.
ENGLISH
Manual Development Group
© 2017 Yamaha Corporation
Published 07/2017 POSC*.*- **A0
Printed in China
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/
Owner’s Manual
ZW14240
2•NU1X
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these
graphics on the enclosure. The explanation of these graph-
ics appears on this page. Please observe all cautions indi-
cated on this page and those indicated in the safety
instruction section.
See bottom of Keyboard enclosure for graphic symbol
markings.
The exclamation point within the equi-
lateral triangle is intended to alert the
user to the presence of important operat-
ing and maintenance (servicing) instruc-
tions in the literature accompanying the
product.
The lightning flash with arrowhead
symbol, within the equilateral triangle,
is intended to alert the user to the pres-
ence of uninsulated “dangerous volt-
age” within the product’s enclosure that
may be of sufficient magnitude to con-
stitute a risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is
properly installed and used in its normal and customary
manner, all foreseeable risks have been eliminated. DO
NOT modify this unit or commission others to do so unless
specifically authorized by Yamaha. Product performance
and/or safety standards may be diminished. Claims filed
under the expressed warranty may be denied if the unit is/
has been modified. Implied warranties may also be
affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be cor-
rect at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without
notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to pro-
duce products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is
approximately five years. When replacement becomes nec-
essary, contact a qualified service representative to per-
form the replacement.
Warning: Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away from
children. Dispose of used batteries promptly and as regu-
lated by applicable laws. Note: In some areas, the servicer
is required by law to return the defective parts. However,
you do have the option of having the servicer dispose of
these parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and fed-
eral regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manu-
facturer’s warranty, and are therefore the owners responsi-
bility. Please study this manual carefully and consult your
dealer before requesting service.
NAME PLATE LOCATION: The graphic below indi-
cates the location of the name plate. The model number,
serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number,
and the date of purchase in the spaces provided below and
retain this manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
SPECIAL MESSAGE SECTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
92-469-q (bottom)
NU1X •3
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifica-
tions not expressly approved by Yamaha may void your author-
ity, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements pro-
vides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices. This equipment gen-
erates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may
cause interference harmful to the operation of other electronic
devices. Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If this product
is found to be the source of interference, which can be deter-
mined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected
by the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to distribute
this type of product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation of America, Elec-
tronic Service Division, 6600 Orangethorpe Ave, Buena Park,
CA90620
The above statements apply ONLY to those products distrib-
uted by Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Hybrid Piano
Model Name : NU1X
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference
that may cause undesired operation.
See user manual instructions if interference to radio reception is suspected.
* This applies only to products distributed by YAMAHA
CORPORATION OF AMERICA.
(FCC DoC)
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar
ansluten till vägguttaget, även om själva apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge
netledningen sidder i en stikkontakt, som er tændt — også selvom der er
slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta
verkosta.
(standby)
4•NU1X Owner’s Manual
The above warning is located on the bottom of the unit.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and main-
tenance (servicing) instructions in the liter-
ature accompanying the product.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tri-
pod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel. Ser-
vicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
(UL60065_03)
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
The model number, serial number, power requirements, etc., may be found
on or near the name plate, which is at the bottom of the unit. You should
note this serial number in the space provided below and retain this manual
as a permanent record of your purchase to aid identification in the event of
theft.
Model No.
Serial No.
(bottom_en_01)
The name plate is located
on the bottom of the unit.
NU1X Owner’s Manual •5
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:
Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on
it.
Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Use only the supplied power cord/plug.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
(For information on whether Bluetooth functionality is included or not, refer to page
40.)
Radio waves may affect electro-medical devices.
- Do not use this product near medical devices or inside areas in which the use
of radio waves is restricted.
- Do not use this product within 15cm (6 in.) of persons with a heart pacemaker
implant.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as water
seeps into the instrument, turn off the power immediately and unplug the power
cord from the AC outlet. Then have the instrument inspected by qualified Yamaha
service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected
by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Do not place the instrument in an unstable position where it might accidentally
fall over.
When transporting or moving the instrument, always use two or more people.
Attempting to lift the instrument by yourself may damage your back, result in
other injury, or cause damage to the instrument itself.
Before moving the instrument, remove all connected cables, to prevent damage to
the cables or injury to anyone who might trip over them.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power cord
from the wall AC outlet.
Power supply/Power cord
Do not open
Location (if
Bluetooth
functionally is included)
Water warning
Fire warning
If you notice any abnormality
Power supply/Power cord
Location
DMI-5 1/2
6•NU1X Owner’s Manual
Though the wooden parts of this instrument have been designed and produced
with care concerning the environment and human health, in some rare instances
customers may sense an unusual odor or develop imitation in the eyes, due to the
coating material and adhesive.
To avoid this, we recommend that you observe the following:
1. Specially ventilate the room for several days after unpacking and installing
this instrument, since it has been packed in airtight conditions in order to
maintain quality during transportation.
2. If the room housing the instrument is small, continue to ventilate it normally,
either daily or periodically.
3. If you have left the instrument in a closed room for a long time under high
temperature, ventilate the room, then lower the temperature if possible before
using the instrument.
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the desired
listening level.
Do not insert a finger or hand in any gaps on the fallboard or instrument. Also
take care that the fallboard does not pinch your finger.
Do not apply excessive force when closing the fallboard.
A fallboard equipped with the SOFT-CLOSE™ mechanism closes the cover
slowly. Applying excessive force to the fallboard when closing it could damage
the SOFT-CLOSE™ mechanism, and possibly result in injury to your hands and
fingers caught under the closing the fallboard.
Never insert or drop paper, metallic, or other objects into the gaps on the
fallboard, panel or keyboard. This could cause physical injury to you or others,
damage to the instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing loss.
If you experience any hearing loss or ringing in the ears, consult a physician.
Do not place the bench in an unstable position where it might accidentally fall
over.
Do not play carelessly with or stand on the bench. Using it as a tool or stepladder
or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
For benches that can be adjusted, do not adjust the bench height while sitting on
the bench, since this can cause excessive force to be imposed on the adjustment
mechanism, possibly resulting in damage to the mechanism or even injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the specified tool in order to prevent the possibility of accident
or injury.
Keep special watch over any small children so that they don’t fall off the rear of the
bench. Since the bench does not have a backrest, unsupervised use may result in
accident or injury.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.
Handling
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise. When you use the instrument along with an application on your iPad, iPhone or iPod touch, we recommend that you set “Airplane
Mode” to “ON” on that device in order to avoid noise caused by communication.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)
to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –
40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the instrument with metal, porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
Maintenance
When cleaning the instrument, use a soft and dry/slightly damp cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemical-
impregnated wiping cloths.
In the case of a model with a polished finish, gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch
the instrument's finish.
During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the
wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth.
Connections
Handling caution
Using the bench (If included)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-5 2/2
NU1X Owner’s Manual •7
Saving data
Some of the data of this instrument (page 34) and the Song data saved to the internal memory of this instrument (page 28) are retained when the power is
turned off. However, the saved data may be lost due to some failure, an operation mistake, etc.
Save the Song data onto USB flash drive/an external device such as a computer (pages 33, 37).
Before using a USB flash drive, make sure to refer to page 31.
To protect against data loss through USB flash drive damage, we recommend that you save your important data onto spare USB flash drive or an external
device such as a computer as backup data.
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal
use.
This product incorporates and bundles contents in which Yamaha owns copyrights or with respect to which Yamaha has license to use others' copyrights.
Due to copyright laws and other relevant laws, you are NOT allowed to distribute media in which these contents are saved or recorded and remain virtually
the same or very similar to those in the product.
* The contents described above include a computer program, Accompaniment Style data, MIDI data, WAVE data, voice recording data, a score, score
data, etc.
* You are allowed to distribute medium in which your performance or music production using these contents is recorded, and the permission of Yamaha
Corporation is not required in such cases.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your
instrument.
iPhone, iPad, iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under
license.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
About Bluetooth
For information on handling Bluetooth communications, refer to “About Bluetooth” on page 40.
Tuning
Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-adjusted to match other instruments).
However, since the keyboard mechanism of this instrument is the same as that of an actual piano, the mechanism may change over years of use. If this
occurs or causes problems in performance, contact your Yamaha dealer.
Transporting / Installing
If you move to another location, transport the
instrument horizontally. Do not subject the
instrument to excessive vibration or shock.
CAUTION
When moving the instrument, always hold the bottom
of the keyboard unit and the handgrips of the rear
side. Be sure not to hold the headphone jack box.
Improper handling can result in damage to the instru-
ment or personal injury.
Place the instrument away from the wall by at least
10 cm to optimize and enhance the sound effect. If
you find the instrument shaky or unstable after
installing, insert the included felt strips. For details,
refer to the instructions supplied with the felt strips.
Do not hold here.
Do not
hold here.
Rear handgrip
Rear
handgrip
Rotate the adjuster
until it comes in firm
contact with the floor
surface.
8•NU1X Owner’s Manual
Hybrid Piano
NU1X
Combining over a century of experience in crafting world-class pianos with the latest in advanced
technology, Yamaha proudly introduces an instrument that is closer than ever to an actual acoustic
piano—equipped with every essential element pianists demand.
Authentic acoustic piano touch with special upright piano action and piano keyboard
The AvantGrand NU1X features a specially designed mechanism in which the keyboard action and the hammer
workings realistically reproduce those of an acoustic piano.
Moreover, the wood construction of the keyboard is the same as on an upright piano, giving the instrument even a
more realistic acoustic piano-like touch response.
Enjoy performing and practicing with the sound of famous grand pianos
This instrument puts the sound of several different renowned grand pianos at your fingertips, including the CFX,
Yamaha’s flagship concert grand piano—which delivers dynamic sound, from a brilliant high-range to powerful
bass—and the Bosendorfer
*
Imperial, a flagship grand piano known for its subtle and warm sound.
* Bosendorfer is a subsidiary company of Yamaha.
Natural sound distance sensation for headphone play  Page 15
This instrument features a binaural sampling sound designed especially for use with headphones. Binaural sampling
is a method which uses two microphones placed where the ears of a performer would be and records that piano
sound. Listening to the sound created through this method with headphones gives the impression of being immersed
in the sound, as if it was actually emanating from the piano.
Always in optimum condition, no need for tuning
Unlike acoustic pianos, this instrument does not need to be tuned. It always stays perfectly in tune even after long-
time use.
Playback and Recording functions to support your lessons and practice

Page 26, 28, 39
You can record your performance to this instrument and a USB flash drive, and improve your performance by
listening to the recording. Furthermore, this instrument has a Bluetooth audio function, letting you play back audio
data on this instrument by connecting with a Bluetooth-equipped device via Bluetooth.
NU1X Owner’s Manual •9
Table of Contents
About Manuals
This instrument has the following documents and instructional materials.
Included Documents
Owner’s Manual (this book)
This manual describes how to use this instrument.
Online Materials (from Yamaha Downloads)
iPhone/iPad Connection Manual (only in English,
French, German and Spanish)
Explains how to connect the instrument to smart
devices, such as an iPhone, iPad, etc.
Computer-related Operations
Includes instructions on connecting this instrument to a
computer, and operations related to transferring files
and MIDI data.
MIDI Reference
Contains MIDI related information such as MIDI Data
Format and the MIDI Implementation Chart.
MIDI Basics (only in English, French, German and
Spanish)
Contains basic explanations about MIDI.
To obtain these manuals, access the Yamaha Downloads, enter the
model name for searching the desired files.
Included Accessories
Owner’s Manual (this book) ×1
“50 Classical Music Masterpieces” (Music Book) ×1
Online Member Product Registration ×1
The “PRODUCT ID” on the sheet will be needed when you fill out the
User Registration form.
Warranty* ×1
Felt key cover ×1
Power cord ×1
Bench* ×1
* May not be included depending on your area. Check with your Yamaha
dealer.
Felt strip set ×1
Yamaha Downloads http://download.yamaha.com/
PRECAUTIONS ....................................................... 5
Setting Up
Panel Controls and Terminals .................................. 10
Playing the Keyboard ................................................ 11
Opening/Closing the Fallboard and the Music Rest ....11
Turning the Power On/Off............................................12
Confirming the firmware version of this instrument .....13
Adjusting the Master Volume.......................................14
Using Headphones......................................................15
Using the Pedals .........................................................16
Main Operations
Basic Operations and More ...................................... 17
Selecting a Voice.........................................................17
Listening to the Voice Demo Songs ............................18
Using the Metronome ..................................................19
Adjusting the Tempo....................................................20
Changing the Touch Sensitivity...................................20
Playing the Realistic Resonance-enhanced VRM
Voices..........................................................................21
Enhancing the Sound with Reverb ..............................22
Transposing the Pitch in Semitones ............................23
Fine-tuning the Pitch....................................................23
Setting the Scale Tuning .............................................24
Playing Back Songs .................................................. 25
Songs compatible with this instrument ........................25
Playing Back Songs.....................................................26
Recording Your Performance ................................... 28
Deleting a Song file..................................................... 30
Using USB Flash Drives ............................................ 31
About USB Devices .................................................... 31
Formatting USB Flash Drive ....................................... 32
Managing files on a USB flash drive ...........................32
Copying User Songs in the Instrument to USB Flash
Drive............................................................................ 33
Backup Data and Initialization .................................. 34
Backup Data in Internal Memory................................. 34
Initializing the Backup Data......................................... 34
Connections ............................................................... 35
Jacks and Terminals ................................................... 35
Connecting Audio Devices ([AUX IN] jack,
AUX OUT [L/L+R] [R] jacks) ....................................... 35
Connecting External MIDI Devices (MIDI [IN] [OUT]
terminals) .................................................................... 36
Connecting to a Computer ([USB TO HOST] terminal)
... 37
Connecting to a smart device such as iPhone/iPad
([USB TO DEVICE]/ [USB TO HOST],
MIDI [IN][OUT] terminals)............................................ 38
Using the Bluetooth audio function ............................. 39
About Bluetooth* ......................................................... 40
Appendix
Message List .............................................................. 41
Troubleshooting......................................................... 42
Preset Song List (50 Classical Music Masterpieces)
.. 43
Specifications.............................................................44
Index............................................................................45
Quick Operation Guide** ........................................... 46
* For information on whether Bluetooth functionality is included or not, refer to page 40.
** This is a quick reference for operation of the functions assigned to the buttons and
keyboard.
Getting started playing your new Avant Grand!
This section explains how to make detailed settings for the
instrument’s various functions.
This section includes a list of display messages, Quick
Operation Guide and other information.
10 NU1X Owner’s Manual
Setting Up
Panel Controls and Terminals
Overview
Control Panel
q Display ................................................................See below.
w [PIANO/VOICE] button .................. pages 15, 16, 17, 20, 21
e [REVERB] button .................................................... page 22
r [METRONOME] button ....................................pages 19, 20
t [+]/[-] button
y [DEMO/SONG] button ...............................pages 18, 26, 28
u [REC] button............................................................ page 29
i [FUNCTION] button..........................................pages 23, 46
o [>/o] (PLAY/PAUSE) button.............................pages 26, 29
!0 (Bluetooth lamp) ............................................... page 39
Display
Indicates various values such as Song number and Parameter value. Note that the display turns dark after the value is set.
This display also indicates various messages with the three characters. For details, refer to page 41.
Square brackets [ ]
The names of panel buttons, jacks, connectors, and so on are enclosed in square brackets. Also, the word “button” is
omitted throughout this manual (for example, the PIANO/VOICE button is expressed as [PIANO/VOICE]).
Music Rest (page 11)
Fallboard
(page 11)
Rear surface
[AC IN] jack
(page 12)
[ ] (Standby/On) switch
(page 12)
Pedals (page 16)
Control panel
(see below)
Front surface
Jacks and
Te rm in al s
(page 35)
[MASTER VOLUME]
control (page 14)
[USB TO DEVICE]
terminal (page 31)
[PHONES] jacks
(page 15)
Adjuster
(page 7)
Headphone hanger
(page 15)
q
w
e
r
t
!0
y
uo
i
d.01
Song number
Parameter value
NU1X Owner’s Manual •11
Playing the Keyboard
To raise the fallboard and the music rest
1 With both hands, hold the hand grip, then lift and open the fallboard.
2 Fold down the top of the fallboard.
3 Open the music rest.
To lower the fallboard and the music rest
1 Close the music rest.
If you omit this operation and close the fallboard, the music rest will hit the keyboard and may result in damage.
2 With both hands, open the folded top of the fallboard, and close it gently.
The fall board is equipped with the special SOFT-CLOSE™ mechanism which closes the cover slowly.
CAUTION
Hold the fallboard with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be care-
ful to avoid catching fingers (yours or others, especially children’s) between the fallboard and the unit.
Do not apply excessive force when closing the fallboard. Applying excessive force to the fallboard when closing it could
damage the SOFT-CLOSE™ mechanism, and possibly result in injury to your hands and fingers caught under the clos-
ing fallboard.
Do not place anything (such as metal objects or pieces of paper) on top of the fallboard. Small objects placed on the fall-
board may fall inside the unit when the fallboard is opened and may be nearly impossible to remove. Once inside, they
could cause electric shock, short circuit, fire or other serious damage to the instrument.
Opening/Closing the Fallboard and the Music Rest
1 2 3
CAUTION
Be careful to avoid catching your fingers
between the fallboard and the instrument.
21
CAUTION
Be careful to avoid catching your fingers
between the fallboard and the instrument.
Playing the Keyboard
12 NU1X Owner’s Manual
1 Connect the power cord in the order shown in the illustration.
Refer to the “Panel Controls and Terminals” on page 10 for information on the location of the [AC IN] jack.
WARNING
Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be
replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
WARNING
The type of AC power cord provided with the instrument may be different depending on the country in which the instru-
ment was purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets
in your area.) Do NOT modify the plug provided with the instrument. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
CAUTION
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunc-
tion occurs, immediately turn off the power switch and disconnect the plug from the outlet.
2 Turn down the [MASTER VOLUME] control to “MIN.
3 Press the [ ] (Standby/On) switch on the right of the keyboard to turn the power on.
The power indicator located on the right of the [MASTER VOLUME] control lights up. The display indicators
flash in a pattern, indicating the instrument is currently starting up, and stop flashing when startup is completed.
NOTICE
Do not press any keys, buttons or pedals until the instrument has completely started up (roughly five seconds after turn-
ing on the switch). Doing so may cause some keys to not play normally or some other malfunction to occur.
4 Play the keyboard.
While playing the keyboard, adjust the volume level by using the [MASTER VOLUME] control located at the
left of the panel.
Turning the Power On/Off
q
w
AC outlet
When disconnecting the power cord, first turn off the power, then follow this procedure in reverse order.
[AC IN] connector
(page 10)
MAXMIN
MASTER VOLUME
3
2
The power indicator lights up.
[ ] (Standby/On) switch
MAX
USB TO
MIN
MASTER VOLUME
The level
increases.
The level
decreases.
Playing the Keyboard
NU1X Owner’s Manual •13
5 Turn off the power by pressing the [ ] (Standby/On) switch for about a second.
The power gradually turns off.
CAUTION
Even after the power switch is turned off, electricity is still flowing to the instrument at the minimum level. Remove the
electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical
storms.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an Auto Power Off function that
automatically turns the power off if the instrument is not operated for approximately 30 minutes.
Disabling Auto Power Off (simple method)
Turn the power on while holding down the lowest key on the keyboard.
The indication “
PoF
” appears on the display briefly and Auto Power Off is disabled.
Disabling or enabling the Auto Power Off setting
While the power is on, simultaneously hold down [FUNCTION] and press the A5 key. Pressing the A5 key repeat-
edly in this condition toggles between “
OFF
” (disabled) and “
On
” (enabled), and the setting appears on the display.
You can confirm the firmware version of your instrument.
While holding down [FUNCTION], press the B5 key. The current version appears on the display.
About the latest Firmware Version
Yamaha may from time to time update firmware of the product without notice for improvement.
Make sure to check our website for information of the latest release and upgrade the firmware for your instrument.
Confirming the firmware version of this instrument
Lowest key (A-1)
PoF
A5
Highest key (C7)
B5
Highest key (C7)
Playing the Keyboard
14 NU1X Owner’s Manual
To adjust the volume level by using the [MASTER VOLUME] control located at the front left, just below
the keyboard while playing the keyboard.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Intelligent Acoustic Control (IAC)
This function automatically adjusts and controls the sound quality according to the overall volume of the instrument.
Even when the volume is low, it permits both low sounds and high sounds to be clearly heard. Note that the IAC is
effective only from the sound output of the instrument speakers.
To turn on/off the IAC:
While holding down [FUNCTION], press the C0 key repeatedly (if necessary).
Default setting: On
To adjust the IAC Depth:
While holding down [FUNCTION], press one of the keys between A0–D#1.
Setting range: -3 (A0) – 0 (C1) – 3 (D#1)
Default setting: 0 (C1)
The higher the value, the more clearly that low and high sounds are heard at lower volume levels.
Adjusting the Master Volume
MAX
USB T
O
MIN
MASTER VOLUME
The level
increases.
The level
decreases.
C0 C1
(0)
A0
(-3)
D#1 (3)
Lowest
key (
A-1)
Playing the Keyboard
NU1X Owner’s Manual •15
Since this instrument is equipped with two
[PHONES] jacks, you can connect two sets of
standard stereo headphones. If you are using only
one set of headphones, insert a plug into either
jack; this automatically shuts off the speakers.
CAUTION
Avoid listening to the instrument at a high volume level
through headphones for a long period of time, to prevent
hearing damage.
NOTICE
Do not hang anything other than the headphones on the
hanger. Otherwise, the instrument or the hanger may be dam-
aged.
Reproducing the Natural Sound Distance Sensation (when using Headphones)—Binaural Sampling
and Stereophonic Optimizer
This instrument features two advanced technologies that allow you to enjoy exceptionally realistic, natural sound,
even though listening on headphones.
Binaural Sampling (“CFX Grand” Voice only)
Binaural sampling is a method that uses two special microphones set at the ear position of a performer and records
the sound from a piano as it is. Listening to the sound with this effect through headphones gives the impression of
being immersed in the sound, as if it was actually emanating from the piano. Moreover, you can enjoy the sound
naturally for a long time without ear strain. When the default Voice, “CFX Grand” (page 17) is selected, connect-
ing the headphones automatically enables the binaural sampling sound.
Stereophonic Optimizer (Piano Voices other than “CFX Grand”)
The Stereophonic Optimizer is an effect which reproduces natural sound distance like the sound of binaural sam-
pling even though you hear it on headphones. When one of the Piano Voices other than “CFX Grand” (Display
numbers 2–5; page 17) is selected, connecting headphones enable the Stereophonic Optimizer.
Turning the Binaural Sampling and Stereophonic Optimizer function on/off
When headphones are connected, the sound from this instrument changed to the sound of Binaural Sampling or the
sound enhanced with the Stereophonic Optimizer. Since these sounds are optimized for listening with headphones,
we recommend that you set this function to “OFF” (as described below).
While holding down [PIANO/VOICE], press the C6 key repeatedly (if necessary) to turn this function on/off. The
specified value is shown on the display while both controls are held.
Default setting: On
Using Headphones
You should turn these functions off when:
Playing the sound of this instrument with an external powered speaker system or a mixer, while monitoring the sound
output from this instrument on connected headphones.
Making an audio recording (page 28) and then playing that recorded audio Song through speakers.
(Make sure to turn off these functions before audio recording.)
NOTE
Before connecting an external powered speaker system, be sure to read “Using an External Stereo System for Playback—AUX OUT [L/L+R] [R] jacks” (page 36).
MAX
PHONES USB TO DEVICE
MIN
MASTER VOLUME
Headphone hanger
Standard stereo
phone plug
C6
Highest key (C7)
Playing the Keyboard
16 NU1X Owner’s Manual
The instrument has three pedals that produce a range of
expressive effects similar to those produced by the pedals on
an acoustic piano.
Damper Pedal (Right)
Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops
(damps) any sustained notes. The damper pedal features a half-pedal function.
Half-pedal function
This function allows the sustain length to vary depending on how far the pedal is
pressed. The farther you press the pedal, the more the sound sustains. For example, if
you press the damper pedal and all notes you are playing sound a bit murky and loud
with too much sustain, you can release the pedal half way to subdue the sustain (murk-
iness).
To set the Half Pedal Point:
While holding down [PIANO/VOICE], press one of the A#4–E5 keys. This operation
sets the degree to which pressing the damper pedal applies the half-pedal effect. The
smaller the value, the shallower the half-pedal point. The larger the value, the deeper
the half-pedal point.
Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will sustain the pressed notes (as if the
damper pedal had been pressed), but all subsequently played notes will not be sus-
tained. This makes it possible to sustain a chord, for example, while the other notes are
played “staccato.
Soft Pedal (Left)
Pressing this pedal will reduce the volume and slightly change the timbre of the notes.
The notes played before this pedal is pressed are not affected.
Using the Pedals
If you press and hold the damper pedal here,
all the notes shown will be sustained.
Setting range: -2 (A#4) – 4 (E5)
Default Setting: 0
GP Responsive Damper Pedal
This special pedal has been designed to provide enhanced tactile response and, when
pressed, is much closer in feel to the pedal of an actual grand piano. It makes it easier
to physically experience the half-pedal point and more easily apply the half-pedal
effect than other pedals.
E5
A#4
NOTE
While the sostenuto pedal is held, the
Organ (Display numbers 12–14; page 17)
or Piano + Strings (Display number 15)
Voices sound continuously without decay
after the notes have been released.
If you press and hold the sostenuto pedal here, only
the notes held at this timing will be sustained.
NU1X Owner’s Manual •17
Basic Operations and More
To select the CFX Grand Voice:
Simply press [PIANO/VOICE]. “1” will appear on the display.
To select a different Voice:
While holding down [PIANO/VOICE], press [+] or [-]. Pressing the buttons switches
through the 15 Voices in numerical order, as indicated in the Voice List below.
Voice List
*VRM: Simulated string resonance sound with physical modeling when the damper pedal is pressed or keys
are pressed. Refer to page 21 for details.
Selecting a Voice
NOTE
To understand the characteristics of various
Voices, listen to Demo Songs for each
Voice (page 18).
Display Voice name Descriptions VRM*
1
CFX Grand
Yamaha’s CFX concert grand piano sound with a wide dynamic
range for maximum expressive control. It is suitable for playing in
any music genre and style. When headphones are connected,
this Voice is automatically changed to “Binaural CFX Grand”
(below).
Binaural CFX
Grand
Yamaha’s CFX concert grand piano sound sampled by Binaural
Sampling, the method optimized for headphone use. Listening
this through headphones gives the impression of being immersed
in the sound, as if it was actually emanating from the piano. This
Voice is selected automatically when headphones are connected.
Refer to page 18 for details. (This Voice cannot be selected fol-
lowing the procedure of “Selecting a Voice” instructions above.)
2
Bösendorfer
Imperial
The famed sound of the Vienna-made Bösendorfer Imperial con-
cert grand piano. Its spacious sound evokes the size of the instru-
ment, and is ideal for expressing tenderness in compositions.
3
Studio Grand
The sound of Yamaha’s C7 grand piano, which is often used in
recording studios. Its bright and clear sound is good for popular
styles.
4
Ballad Grand
Grand piano sound with a soft and warm tone. Good for playing
ballads.
5
Upright Piano
The sound sampled from an upright piano, the Yamaha SU7.
Enjoy the unique tonal character and a lighter, more casual feel.
6
Stage E.Piano
The sound of an electric piano using hammer-struck metallic
“tines. Soft tone when played lightly, and an aggressive tone
when played hard.
-
7
DX E.Piano
An electronic piano sound produced by an FM synthesizer. The
tone will change as you vary your playing touch. Ideal for popular
music.
-
8
Vintage E.Piano
A different type of electric piano sound than Stage E.piano.
Widely used in rock and popular music.
-
9
Harpsichord 8’
The sound of the instrument frequently used in baroque music.
Variations in playing touch will not affect the volume, and a char-
acteristic sound will be heard when you release the key.
-
10
Harpsi. 8’+4’
A harpsichord with an added upper octave. Produces a more bril-
liant sound.
-
11
Celesta
The sound of a celesta (a percussion instrument in which ham-
mers strike metallic bars to produce sound). This instrument is
well-known for its appearance in “Dance of the Sugarplum Fair-
ies” from Tchaikovsky’s “Nutcracker Suite.
-
12
Organ Principal
This Voice features the combination of pipes (8’+4’+2’) of a princi-
pal (brass instrument) organ. It is suitable for Baroque church
music.
-
13
Organ Tutti
This Voice features a full coupler of a pipe organ, famous for the
sound used in “Toccata and Fugue” by Bach.
-
14
Jazz Organ
The sound of a “tonewheel” type electric organ. Sampled with
Rotary SP effect, its rotation speed is slow. Often heard in jazz
and rock idioms.
-
15
Piano + Strings
Combination of piano and strings ensemble Voices, giving you a
richly textured sound as if you were playing the piano with orches-
tral accompaniment.
-
Main Operations
Basic Operations and More
18 NU1X Owner’s Manual
Demo Songs effectively demonstrate each of this instrument’s Voices.
1 Select the Voice for the Demo Song that you want to listen to.
2 Press [DEMO/SONG].
The Demo Song for the Voice selected in Step 1 starts.
To change the Demo Song during playback:
Press [+] or [-].
To adjust the playback tempo:
While holding down [METRONOME], press [+] or [-].
To pause playback:
During playback, press [
>/o] (Play/Pause) to pause playback. Pressing it again
resumes Demo Song playback from the current position.
3 Press [DEMO/SONG] again to stop playback.
Demo Song List
The Songs
d.03
,
d.04
,
d.06
d.08
, and
d.13
d.15
are Yamaha’s original pieces (©2017 Yamaha Corpora-
tion).
Listening to the Voice Demo Songs
NOTE
You can play the keyboard along with the
Demo Song.
NOTE
No MIDI data will be output during Voice
Demo playback.
NOTE
The Binaural CFX Grand Voice is automati-
cally selected when you select the CFX
Grand Voice while headphones are con-
nected. Refer to the “Voice List” on page 17
for details.
Display Voice Name Song Name Composer
d.01
CFX Grand
Variations brillantes op.12 F. F. Chopin
Binaural CFX Grand
d.02
Bösendorfer
Mädchens Wunsch (6 Chants polonaise
S.480 R.145)
F. L i s zt / F. F. C ho p i n
d.03
Studio Grand Original -
d.04
Ballad Grand Original -
d.05
Upright Piano Italienisches Konzert, BWV 971 1st mov. J. S. Bach
d.06
Stage E.Piano Original -
d.07
DX E.Piano Original -
d.08
Vintage E.Piano Original -
d.09
Harpsichord 8’
Concerto a cembalo obbligato, 2 violini, viola e
continuo No.7, BWV 1058
J. S. Bach
d.10
Harpsi. 8’+4’ Gigue, Französische Suiten No.5, BWV 816 J. S. Bach
d.11
Celesta Danse de la Fée Dragée P. I. Tchaikovsky
d.12
Organ Principal Herr Christ, der ein'ge Gottes-Sohn, BWV 601 J. S. Bach
d.13
Organ Tutti Original -
d.14
Jazz Organ Original -
d.15
Piano + Strings Original -
Basic Operations and More
NU1X Owner’s Manual •19
The metronome feature is convenient for practicing with an accurate tempo.
1 Press [METRONOME] to start the metronome.
While the metronome sounds, a dot at the right side of the LED display and the
lamp of the metronome button flash on and off to the tempo.
2 Press [METRONOME] again to stop the metronome.
Selecting the Beat
While holding down [METRONOME], press one of the C3–F3
keys. The selected value is shown on the display while both
controls are held.
Only the first beat is accented with a bell sound when set to a value other than 0.
Adjusting the Metronome volume
While holding down [METRONOME], press one of the C1–G2 keys to set the vol-
ume. The specified value is shown on the display while both controls are held.
Using the Metronome
120.
The beat lamp
flashes at the current
tempo
Default setting: 0 (No 1st beat accent)
NOTE
The Beat of the metronome is restored to
the default setting when the power is turned
off.
Display Key Beat Display Key Beat
0
C3
0
(no 1st beat accent)
4
D#34
2
C#3 2
5
E3 5
3
D3 3
6
F3 6
0
Beat
C3 F3
Highest key (C7)
Setting range: 1–20
Default setting: 15
C1 (1) G2 (20)D2 (15)
max.min.
Lowest
key (A-1)
The volume level increases as you press higher keys.
Basic Operations and More
20 NU1X Owner’s Manual
The tempo of Metronome can be adjusted. You can also adjust the playback tempo of a MIDI Song (page
25) as well as the playback speed of an Audio Song (page 25) as they are playing.
To increase or decrease the value by 1:
While holding down [METRONOME], press [+] (or the C#5 key) to increase or [-] (or
the B4 key) to decrease. While only the Metronome is playing, simply press [+] or [-]
to change the tempo of the Metronome.
To increase or decrease the value by 10:
While holding down [METRONOME], press the D5 key to increase or the A#4 key to
decrease.
To reset the value to the default:
While holding down [METRONOME], press the C5 key or press [+] and [-] simulta-
neously. While only the Metronome is playing, simply press both [+] and [-] simulta-
neously to reset the Metronome to its default tempo.
You can specify the Touch Sensitivity (how the sound responds to the way you play the keys).
While holding down [PIANO/VOICE], press one of the A6–C7 keys. The selected
Touch Sensitivity is shown on the display while both controls are held.
Adjusting the Tempo
NOTE
Adjusting the tempo of Metronome cannot
be done during the playback of Audio
Songs (page 25).
Metronome
Setting range: 5 to 500 beats per minute
Default setting: 120
MIDI Song
Setting range: 5 to 500 beats per minute
Normal setting: Depends on the selected
Song
Audio Song
Setting range: 75% to 125%
Normal setting: 100%
NOTE
The metronome tempo is restored to the
default setting when the power is turned off.
D5 (+10)B4 (-1)
A#4 (-10) C#5 (+1)
Highest key (C7)
C5 (Default)
Changing the Touch Sensitivity
A6
Highest key (C7)
Default setting: 2 (Medium)
NOTE
The touch type is restored to the default
setting when the power is turned off.
NOTE
This setting does not change the weight of
the keyboard, but only the response.
Display Key Touch Sensitivity Descriptions
OFF
A6 Fixed
The volume level does not change at all regardless of
whether you play the keyboard soft or hard.
1
A#6 Soft
The volume level does not change much when you play the
keyboard soft or hard.
2
B6 Medium This is the standard piano touch response.
3
C7 Hard
The volume level changes very widely from pianissimo to
fortissimo to facilitate dynamic and dramatic expression. You
have to hit the keys hard to produce a loud sound.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Yamaha NU1X Bruksanvisning

Kategori
Digitala pianon
Typ
Bruksanvisning