Yamaha MDX-595 Användarmanual

Kategori
Minidisc-spelare
Typ
Användarmanual
U
MDX-595
NATURAL SOUND MINIDISC RECORDER
LECTEUR ENREGISTREUR MINIDISC
OWNER’S MANUAL
MODE D’EMPLOI
SAFETY INSTRUCTIONS
9 Heat — The unit should be situated away from heat
sources such as radiators, stoves, or other units that produce
heat.
10 Power Sources — The unit should be connected to a
power supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection — Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying attention to
receptacles, and the point where they exit from the unit.
12 Cleaning — The unit should be cleaned only as
recommended by the manufacturer.
13 No Use Periods — The power cord of the unit should be
unplugged from the outlet when left unused for a long period
of time.
14 Object and Liquid Entry — Care should be taken so that
objects do not fall into and liquids not spilled into the inside of
the unit.
15 Damage Requiring Service — The unit should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the unit;
or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or exhibits a
marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing — The user should not attempt to service the
unit beyond those means described in the operating
instructions. All other servicing should be referred to qualified
service personnel.
17 Grounding or Polarization — Precautions should be taken
so that the grounding or polarization is not defeated.
18 Power Lines — An outdoor antenna should be located
away from power lines.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
÷ Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated “dangerous
voltage” within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
1 Read Instructions — All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions — The safety and operating
instructions should be retained for future reference.
3 Heed Warnings — All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions — All operating and other instructions
should be followed.
5 Water and Moisture — The unit should not be used near
water — for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near swimming pool, etc.
6 Carts and Stands — The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A An applicance and cart
combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the unit
and cart combination to overturn.
7 Wall or Ceiling Mounting — The unit should be mounted to
a wall or ceiling only as recommended by the manufacturer.
8 Ventilation — The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated on a
bed, sofa, rug or similar surfaces that may block the
ventilation openings: or placed in a built-in installation, such
as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.
IMPORTANT!
Please record the serial number of this unit in the space
below.
Model :
Serial No. :
The serial number is located on the rear of the unit.
Retain this owners manual in a safe place for future
reference.
1.IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2.IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded
cables. Cables supplied with this product MUST be used.
Follow all installation instructions. Failure to follow
instructions could void your FCC authorization to use this
product in the USA.
3.NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will not
result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the
operation of other electronic devices.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion – and, most importantly, without affecting your
sensitive hearing.
We
Want You
LISTENING
For A Lifetime
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the product “OFF” and “ON”, please
try to eliminate the problem using one of the following
measures:
Relocate this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact your local retailer that is authorized to
distribute this type of product. If you cannot locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
For Canadian Customers
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
Since hearing damage from loud sounds is
often undetectable until it is too late,
YAMAHA and the Electronic Industries
Association’s Consumer Electronics Group
recommend you avoid prolonged exposure
to excessive volume levels.
FCC INFORMATION (for U.S. customers only)
1
2
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. This unit is a sophisticated mini disc recorder. To ensure
proper operation for the best possible performance, please
read this manual carefully.
2. Install your unit in a cool, dry, clean place with good
ventilation. Avoid placing it in direct sunlight, near sources of
heat, or in locations subject to vibration, excessive dust, heat,
cold, or moisture. To avoid humming sounds, position the unit
away from other electrical appliances, motors, and
transformers.
3. Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4. Do not place another component on top of this unit, to do so
may discolor or damage the surface of the unit.
5. Do not open the cabinet of this unit, to do so may result in
damage to the unit or electrical shock. If any foreign object or
substance gets into the unit, contact your dealer for
assistance.
6. When removing the power plug from the wall outlet, always
pull directly on the plug; never pull the cord itself.
7. Do not apply excessive force when operating switches and
knobs.
8. When moving the unit, be sure to first disconnect the power
cord from the AC outlet and disconnect all cords connecting
the unit to other equipment.
9. To prevent damage by lightning, disconnect the power cord
from the wall outlet during an electrical storm.
10. Do not attempt to clean this unit with chemical solvents as this
may damage the finish. Use a clean, dry cloth.
11. Be sure to read the “TROUBLESHOOTING” section for advice
on common operating errors before concluding that your unit
is faulty.
12. Keep this manual in a safe place for future reference.
13. The voltage to be used must be the same as that specified on
this unit. Using this unit with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. YAMAHA will not be held
responsible for any damage resulting from use of this unit with
a voltage other than that which is specified.
Note
Please check the copyright laws in your country to record from
records, compact discs, radio, etc. Recording of copyright
material may infringe copyright laws.
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous
if engaged in a live socket outlet.
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows: The wire which is coloured BLUE must be
connected to the terminal which is marked with the
letter N or coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
CLASS 1 LASER PRODUCT
This mini disc recorder is
classified as a CLASS 1 LASER
product.
The CLASS 1 LASER PRODUCT
label is located on the rear
exterior.
(U.K. and Europe models only)
CAUTION FOR CARRYING THE UNIT
Before carrying the unit, first remove a disc from the unit,
press POWER to turn the unit off, then disconnect the AC
power plug from the wall outlet.
WARNING
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
DANGER
Invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
3
English
CONTENTSFEATURES
A sampling rate converter that lets you make
digital recordings from 32 kHz (DAT, etc.) , 44.1
kHz (CD, DAT, MD, etc.) and 48 kHz (DAT, etc.)
program sources.
Editing features (MOVE, ERASE, DIVIDE,
COMBINE, TITLE, and UNDO) that let you take
full advantage of the MD recording system.
Multiple digital input terminals (2 optical inputs)
let you connect two different digital program
sources.
The digital optical output terminal lets you output
digital audio from an MD.*
In addition to the standard disc and track repeat
modes, this unit also has a part (A-B) repeat
mode that lets you repeat a specific part of a
track.
Synchro Record lets you make synchronized
recordings from any type of source component.
Time Rescue Record monitors the sound being
input and allows you to recover sound input from
a point approximately six seconds before you
start the recording operation. (So you will not
miss the beginning of a song when recording
directly from the radio, etc.)
The Monaural Record mode lets you record up to
148 minutes of audio onto one MD.
Timer playback and recording modes that let you
start playback or recording at a preset time using
an optional audio timer.
* This is not possible if MD is a direct copy of another digital
signal (see page 26 for details regarding SCMS copy
protection).
US and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
PART DESCRIPTIONS........................................................ 4
FRONT PANEL ..................................................................... 5
REMOTE CONTROL............................................................. 6
CONNECTIONS ................................................................... 7
ANALOG CONNECTIONS ................................................... 7
DIGITAL CONNECTIONS .................................................... 7
PLAYBACK.......................................................................... 8
Skipping Tracks ................................................................ 8
Searching.......................................................................... 9
Switching the Display ....................................................... 9
RANDOM PLAY .................................................................. 10
REPEAT PLAY .................................................................... 10
Single Track Repeat ....................................................... 10
Full Disc Repeat.............................................................. 10
Part (A-B) Repeat............................................................ 11
PROGRAM PLAY................................................................ 11
RECORDING...................................................................... 13
Adjusting Recording Levels ........................................... 14
Auto Marking................................................................... 15
TIME RESCUE RECORDING ............................................. 15
SYNCHRO RECORDING.................................................... 16
MONAURAL RECORDING................................................. 16
MONITOR OUT................................................................... 17
EDITING ............................................................................. 18
MOVE.................................................................................. 18
ERASE................................................................................. 19
Disc Erase....................................................................... 19
Track Erase ..................................................................... 19
Part Erase........................................................................ 20
Disc or Track Title Erase ................................................ 20
COMBINE ........................................................................... 21
DIVIDE ................................................................................ 21
Disc Maintenance .............................................................. 22
TOC WRITE ..................................................................... 22
FRA CHECK .................................................................... 22
TITLING.............................................................................. 23
TIMER OPERATIONS ....................................................... 24
Timer Recording ............................................................. 24
Timer Playback ............................................................... 24
MD SYSTEM LIMITATIONS.............................................. 25
COPY PROTECTION (SCMS) .......................................... 26
NOTES REGARDING THE REMOTE CONTROL............ 26
Remote Control Operation Range.................................. 26
Battery Installation .......................................................... 26
TROUBLESHOOTING....................................................... 27
DISPLAY MESSAGES ...................................................... 28
SPECIFICATIONS ............................................................. 29
4
PART DESCRIPTIONS
Front Panel
#˜* &
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
$ › % fi ^ fl & ‡ * ° ( · ‚) _ —
Ÿ ! ⁄ @ ¤ # ‹~
ANALOG
DIGITAL
REC LEVEL
Remote Control
?
A–B
!
S/F
SCROLLDISPLAY
REPEAT
PROG
&
RNDM
)(
D E F
2
A B C
1
M N O
5
J K L
4
G H I
3
S T U
7
P Q R
6
/
0
Y Z
9
V W X
8
CHAR.TITLE SETDELETENUMBER
¡
SEARCH
1
INPUT
M-MARK MONO/ST
¢
SKIP
4
PAUSE
8
PLAY
£
REC
¶
STOP
7
SPACE
+10
s
MDX
CD-P
SYNCTIME
REC
@
¤
#
‹
$
⁄
~
!
Ÿ
›
fi
%
fl
^
&
*
‡
·
)
‚
(
°
5
English
FRONT PANEL
~ POWER (8)
Press to turn the unit on or off.
Ÿ Disc insertion slot
Insert the disc into this slot.
! ) EJECT
Press to remove the disc.
If the TOC* data has not yet been written, it is written
automatically before the disc is ejected.
Remote control sensor (26)
Receives the signals emitted from the remote control.
@ Display panel (9)
Displays various system information.
¤ #/* (8, 14)
Press during stop (or pause) to start playback. Press
while playing to pause.
Press during record pause to start recording. Press
while recording to pause.
# & (8, 13, 18, 23)
Press to stop recording or playback.
Press to cancel an edit or title input operation.
REC (14)
Press during stop or pause to activate the record
pause mode.
$ TIMER (24)
Use to set the unit to play or record when activated by
an external timer.
RANDOM (10)
Press to activate or deactivate the random play mode.
% REPEAT S/F (10)
Press to select single track (S) or full disc (F) repeat.
REPEAT A-B (11)
Press to specify the A and B points for A-B repeat.
^ DISPLAY (9)
Press repeatedly to switch between the title and time
displays.
SCROLL (9)
Press to scroll the disc (track) title across the display.
Press while scrolling to pause the scroll. Press and
hold to scroll rapidly.
& TITLE (23)
Press to activate or deactivate the title mode.
CHARA. (23)
Press repeatedly to select different types of characters
when creating a disc (track) title.
* DELETE/CANCEL (23, 18)
Press to cancel an edit function or to delete the
selected character when titling a disc (track).
° EDIT (18)
Press repeatedly to access the different edit modes.
( SET/ENTER (23, 18)
Press to confirm an edit operation or enter a character
in the title mode.
· Jog dial ($ )/
DIGITAL REC LEVEL (8, 14, 18, 23)
Use to adjust the digital recording level when
recording digital audio sources.
Use to skip to the beginning of previous tracks or
advance to later tracks.
Use to select characters when creating a disc (track)
title.
) SEARCH ! (9, 23)
Press and hold to search quickly during play or pause.
Use to move the cursor when creating a disc (track)
title.
INPUT (13)
Press repeatedly to select the input jacks you want to
record from: ANALOG or DIGITAL (OPTICAL 1 or
OPTICAL 2).
_ ANALOG REC LEVEL (14)
Use to adjust the recording level when recording from
the analog inputs.
PHONES (12)
PHONES jack
For connecting stereo headphones.
PHONES LEVEL knob
Turn to adjust the volume of the headphones
connected to the PHONES jack.
See the pages in parenthesis for details regarding operation.
* TOC (Table of Contents): This is the non-audio data
contained on all mini discs (track numbers, playback
time, title data, etc.).
UTOC (User’s Table of Contents): This is non-audio data
that you can edit (like track numbers, playback time, and
title data).
6
REMOTE CONTROL
See the pages in parenthesis for details regarding operation.
SCROLL (9)
Press to scroll the disc (track) title across the display.
Press while scrolling to pause the scroll. Press and
hold to scroll rapidly.
^ NUMBER (23)
Press before pressing a number button to input a
number during title mode.
DELETE (23)
Press to delete the selected character when creating a
disc (track) title.
& SET (23)
Press to confirm selected character when creating a
disc (track) title.
M-MARK (15)
Press to select automatic or manual marking of tracks
during recording.
* INPUT (13)
Press repeatedly to select the input jacks you want to
record from: ANALOG or DIGITAL (OPTICAL 1 or
OPTICAL 2).
° MONO/ST (16)
Press during stop or pause to select either monaural or
stereo recording.
( Special Record buttons
TIME (15)
Press during record pause mode to activate Time
Rescue Recording.
SYNC (16)
Press during stop to activate Synchronized Recording.
· CD-P (16)
Press to start playback from a YAMAHA CD player.
) REC ? (14)
Press during stop or pause to activate the record
pause mode.
STOP & (8, 13, 18, 23)
Press to stop recording or playback.
Press to cancel an edit or title input operation.
~ REPEAT (10)
S/F [ ! ]
Press to select single track (S) or full disc (F) repeat.
Press to select “!” when creating a disc (track) title.
A-B [ ? ]
Press to specify the A and B points for A-B repeat.
Press to select “?” when creating a disc (track) title.
Ÿ PROG [ – ] (11)
Press to activate or deactivate the program play mode.
Press to select “–” when creating a disc (track) title.
! RNDM [ & ] (10)
Press to activate or deactivate the random play mode.
Press to select “&” when creating a disc (track) title.
Numbers [Characters] (8, 23)
Use to specify a track.
Press repeatedly to select a character when creating a
disc (track) title.
@ CHAR. (23)
Press repeatedly to select uppercase or lowercase
letters during title mode.
¤ TITLE (23)
Press to activate or deactivate the title mode.
# SEARCH ! (9, 23)
Press and hold to search quickly during play or pause.
Use to move the cursor when creating a disc (track)
title.
SKIP $ (8, 23)
Press to skip back to the beginning of previous tracks
or advance to later tracks during play, pause or stop.
Use to select characters when creating a disc (track)
title.
$ PLAY # (8, 14)
Press during stop (or pause) to start playback.
Press during record pause to start recording.
PAUSE * (8, 14)
Press to pause playback or recording.
% DISPLAY (9)
Press repeatedly to switch between the title and time
displays.
7
English
DIGITAL OUT
OPTICAL
DIGITAL IN DIGITAL OUT
OPTICAL OPTICAL
L
L
R
R
DIGITAL
OPTICAL
OUT
1
2
ANALOG
IN OUT
(PLAY)(REC)
34
IN
L
L
R
R
PLAY
REC
3
4
LR
DIGITAL
OPTICAL
OUT
1
2
ANALOG
IN OUT
(PLAY)(REC)
34
IN
Connections should be made to the correct input/output terminals on the other component.
Also refer to the owner’s manual supplied with the component you are connecting.
If the placement of this unit causes noise in other equipment, such as a tuner, move them farther apart.
CONNECTIONS
Do not plug in this unit (or other components) until all connections are complete.
ANALOG CONNECTIONS
DIGITAL CONNECTIONS
Notes for analog connections
The white plug on the audio connecting cords corresponds to the L (left) channel and the red plug corresponds to the R (right) channel.
Be sure to connect L (left) to L and R (right) to R. Also make sure that the plugs are fully inserted and that the connection is firm.
The LINE OUT jacks on the MD recorder should be connected to the MD PLAY jacks on your amplifier.
The LINE IN jacks on the MD recorder should be connected to the MD REC jacks on your amplifier.
The LINE OUT terminals on this unit are numbered 3 and the LINE IN jacks are numbered 4. When connecting this unit to a YAMAHA
amplifier or receiver whose terminals are numbered 1, 2, 3, 4 ... (etc.), connect this unit’s LINE OUT terminals to the input terminals
numbered 3 and connect this unit’s LINE IN terminals to the output terminals numbered 4 on the rear panel of the amplifier or receiver.
Audio connecting cords (included)
To AC outlet
To AC outlet
Notes for digital connections
• The DIGITAL IN terminals can be connected to any component with an optical output so you can make direct digital recordings.
• The DIGITAL OUT terminal can be connected to a any component with an optical input so you can output digital audio from an MD.
• Before making OPTICAL connections, remove the terminal cover(s).
• In order to protect the terminals from dust, be sure to attach the terminal covers when the optical terminals are not being used.
*Optical fiber cable
*Optical fiber cable
Amplifier/Receiver
Amplifier/Receiver
(or MD/DAT recorder)
with optical IN/OUT
Optical fiber cable (included)
CD player (etc.) with
optical OUT
* One optical fiber cable is included with
the MDX-595. Additional OPTICAL
connections should be made using
commercially available optical fiber cables.
8
PLAYBACK
Preparations
Be sure to set the TIMER switch to OFF, then press
POWER to turn this unit on.
Set your amplifier or receiver to MD.
To stop
Press & (STOP & on the remote).
To pause
Press #/* (PAUSE * on the remote).
Press again to resume playback (or press PLAY # on the
remote).
To eject the MD
Press ) EJECT.
Note
The MONO indicator lights when playing monaural MDs.
Skipping Tracks
To skip to the next track
Turn the jog dial to the right (or press SKIP on the
remote).
To skip to a previous track
Turn the jog dial to the left (or press SKIP $ on the
remote).
Turn one click to skip to the beginning of the current track.
Turn an additional click to skip back to the beginning of
each previous track.
To skip to a specific track number
Press the number buttons on the remote corresponding to
the track you desire.
Example:
To select track 3, press 3.
To select track 13, press +10, then press 3.
To select track 23, press +10 twice, then press 3.
To skip to the last track on the disc
Turn the jog dial to the left when the display is showing the
total tracks and total playing time.
?
A–B
!
S/F
SCROLLDISPLAY
REPEAT
PROG
&
RNDM
)(
D E F
2
A B C
1
M N O
5
J K L
4
G H I
3
S T U
7
P Q R
6
/
0
Y Z
9
V W X
8
CHAR.TITLE SETDELETENUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
SPACE
+10
s
MDX
CD-P
REC
SYNCTIME
M-MARK MONO/ST
SEARCH
!
2
SKIP
$
PAUSE *
Numbers
STOP &
&#˜*
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
ANALOG
DIGITAL
REC LEVEL
2
1
SEARCH ! jog dial
1 Insert an MD.
2 Press #/* (PLAY # on the remote) to start
playback.
3 Adjust the volume using the volume control on
your amplifier or receiver.
Arrow pointed toward
disc insertion slot
0
NATURAL SOUND MINIDISC RECORDER MDX–793
Label facing up
&
) EJECT
9
English
2 Time remaining on the MD (only for recordable MDs)
3 Disc title
During playback
Press DISPLAY repeatedly to display the following
information.
1 Current track number and elapsed time
2 Time remaining on the current track
3 Track title
If the track has not been given a name, “No Title” is
displayed and the display switches back to the elapsed time
(1).
To view the entire disc (track) title
If the disc (track) title is too long to fit in the display, press
SCROLL to move the title sequentially across the display.
While the title is being displayed, press SCROLL to pause
the display, and again to continue presentation of the title.
Press and hold SCROLL for rapid presentation of the title.
Searching
To search forward during play or pause
Press and hold SEARCH .
To search in reverse during play or pause
Press and hold SEARCH !.
Notes
Sound can be heard when searching in play mode to help you
locate the desired position within the track. No sound is heard
when searching in pause mode, but the search is conducted
at a higher speed.
When searching in play mode, playback stops when you
reach the end of the last track.
Search may not function correctly when there are several
consecutive tracks consisting of only a few seconds each.
Switching the Display
When you insert an MD, the disc title is displayed
automatically (“No Title” appears if there is no disc title).
Pressing DISPLAY during stop or playback to display other
information, such as the remaining time and track titles.
During stop
Press DISPLAY repeatedly to display the following
information.
1 Number of tracks and total playing time
SCROLL
DISPLAY
DISC TRACK
TOTAL
REMAIN
Total tracks Total playing time
REMAIN indicator
DISC TRACK
TOTAL
REMAIN
Time remaining on the MD
Total tracks
DISC TRACK
TOTAL
REMAIN
DISC TRACK
TOTAL
REMAIN
#
REMAIN indicator
DISC TRACK
TOTAL
REMAIN
#
Track number Elapsed time
DISC TRACK
TOTAL
REMAIN
#
&#˜*
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
ANALOG
DIGITAL
REC LEVEL
?
A–B
!
S/F
SCROLLDISPLAY
REPEAT
PROG
&
RNDM
)(
D E F
2
A B C
1
M N O
5
J K L
4
G H I
3
S T U
7
P Q R
6
/
0
Y Z
9
V W X
8
SPACE
+10
DISPLAY SCROLL
10
RANDOM PLAY
You can have the unit play all the tracks on a disc in
random order.
To start random playback
Press RANDOM (RNDM on the remote).
The RANDOM indicator lights up and “Random Search”
appears in the display while the unit selects a track.
Playback starts automatically.
To cancel
Press RANDOM (RNDM on the remote) again to turn off the
RANDOM indicator.
Notes
Pressing SKIP during random play skips to another track
at random. Pressing SKIP $ returns to the beginning of the
current track (you cannot return to previously played tracks).
If you turn the unit off during random playback, it will be ready
for random play the next time you turn the power back on.
REPEAT PLAY
You can have the unit repeat a single track, a full disc, or
just part of a track.
Single Track Repeat
1 Select the track you want to repeat.
2 Press S/F – REPEAT repeatedly to light the
REPEAT S indicators.
To cancel
Press S/F – REPEAT repeatedly to turn off the REPEAT S
indicators.
Note
Single track repeat is not available during random or program
playback.
Full Disc Repeat
Press S/F – REPEAT repeatedly to light the REPEAT
F indicators.
To cancel
Press S/F – REPEAT repeatedly to turn off the REPEAT F
indicators.
Notes
In program play mode, the entire program is played
repeatedly.
In random play mode, the unit reshuffles the tracks and plays
them again after each track plays once.
&#˜*
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
ANALOG
DIGITAL
REC LEVEL
REPEAT
A-BSF
REPEAT
A-BSF
?
A–B
!
S/F
SCROLLDISPLAY
REPEAT
PROG
&
RNDM
)(
D E F
2
A B C
1
M N O
5
J K L
4
G H I
3
S T U
7
P Q R
6
/
0
Y Z
9
V W X
8
SPACE
+10
S/F – REPEAT
A-B – REPEAT
A-B – REPEATS/F – REPEAT
RNDM
?
A–B
!
S/F
SCROLLDISPLAY
REPEAT
PROG
&
RNDM
)(
D E F
2
A B C
1
M N O
5
J K L
4
G H I
3
S T U
7
P Q R
6
/
0
Y Z
9
V W X
8
SPACE
+10
&#˜*
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
ANALOG
DIGITAL
REC LEVEL
RANDOM
11
English
REPEAT
A-BSF
REPEAT
A-BSF
PROGRAM PLAY
This function lets you enjoy listening to your favorite tracks
in any order you desire.
1 Press STOP & to stop playback.
2 Press PROG to light up the PROGRAM indicator.
3 Program the desired track by pressing the
corresponding numeric buttons.
Example:
To select track 3, press 3.
To select track 13, press +10, then press 3.
To select track 23, press +10 twice, then press 3.
The following display appears momentarily to
show the step information:
The display then switches to the program status:
Repeat this operation to program up to 30 steps.
4 Press PLAY # to start program playback.
4
2
TOTAL
PROGRAM
Total steps
Total playing time
Continued on next page
?
A–B
!
S/F
SCROLLDISPLAY
REPEAT
PROG
&
RNDM
)(
D E F
2
A B C
1
M N O
5
J K L
4
G H I
3
S T U
7
P Q R
6
/
0
Y Z
9
V W X
8
CHAR.TITLE SETDELETENUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
SPACE
+10
s
MDX
CD-P
REC
SYNCTIME
M-MARK MONO/ST
1
3
DELETE
SEARCH
!
SKIP
$
PROGRAM
Step number
Track number
Part (A-B) Repeat
This function lets you repeat a specific part of a track. It’s a
convenient way to study a language, or to learn the lyrics to
your favorite song (etc.).
1 Press A-B – REPEAT during playback to specify
the beginning (A point) of the part you want to
repeat.
The REPEAT A indicators light up.
2 Press A-B – REPEAT again to specify the end (B
point) of the part you want to repeat.
The REPEAT A-B indicators light up and the part you
specified starts to repeat.
To cancel
Press & or A-B – REPEAT.
12
To check the programmed data
1 Stop or pause program playback.
2 Press SKIP $ or to skip through the step
information (or use the jog dial on the front panel).
To delete a specific step
1 Stop program playback.
2 Press SKIP $ or to skip through the step
information (or use the jog dial on the front panel).
3 Press DELETE (or DELETE/CANCEL on the front
panel) to delete the step. The higher steps are
renumbered automatically.
To change a step
1 Stop program playback.
2 Press SKIP $ or to skip through the step
information (or use the jog dial on the front panel).
3 Use the numeric buttons to program a new track
number for that step. The original track is cleared from
memory and the new track is programmed.
To cancel
Press PROG to turn off the PROGRAM indicator, eject the
disc, or press POWER to turn this unit off.
Notes
If the total time exceeds 255 minutes “255mOver” is displayed
instead of the total time.
SKIP $ or can be used during playback to skip
between programmed tracks.
SEARCH can be used during playback to search through
all tracks in the current program.
SEARCH ! can be used during playback to return to the
beginning of the current track.
To use headphones for private listening
Set the PHONES LEVEL knob on the front panel to “0”
(minimum) and insert the headphones plug of your stereo
headphones into the PHONES jack.
To adjust the volume level of the headphones
Use the PHONES LEVEL knob.
Turn toward “10” (maximum) to increase the volume.
Turn toward “0” (minimum) to decrease the volume.
13
English
RECORDING
This unit allows you to make recordings from a wide variety
of program sources (both analog and digital).
When recording an analog source (such as an LP or
cassette) this unit converts the analog signals to a
44.1 kHz digital signal before recording them onto the MD.
When recording a digital source, this unit converts the
digital signals to 44.1 kHz for recording onto the MD.
However, if you are recording a 44.1 kHz source signal
(such as a CD) there is no conversion. This unit can record
32, 44.1 and 48 kHz digital signals.
Preparations
Be sure to set the TIMER switch to OFF, then press
POWER to turn this unit on.
Set your amplifier or receiver to the program source to be
recorded.
1 Insert an MD.
2 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
For Select
LINE IN 4 ANALOG
DIGITAL IN OPTICAL 1 DIGITAL OPT. 1
DIGITAL IN OPTICAL 2 DIGITAL OPT. 2
* Appears when digital signal is input.
3 Locate the point where you want to start
recording.
When recording on a blank MD
Skip this step.
To start recording from the end of a previous recording
Press & to set this unit to stop mode.
To record over a previous recording
Turn the jog dial (or press SKIP $ or on the remote)
to select a track (recording starts from the beginning of the
deleted track), or press ^ (PAUSE * on the remote)
during playback to pause at the point where you want to
start recording.
Input indicator
(Source) sampling frequency indicators*
ANALOG
DIGITAL
OPT. 1 2
COAX.
3244.148
kHz
REPEAT
DISC TRACK
TOTAL
REMAIN
RANDOM
PROGRAM
A-BSF
Continued on next page
Arrow pointed toward
disc insertion slot
0
NATURAL SOUND MINIDISC RECORDER MDX–793
Label facing up
&#˜*
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
ANALOG
DIGITAL
REC LEVEL
1
) EJECT
2
REC LEVEL
4
6
CHAR.TITLE SETDELETENUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
s
MDX
CD-P
REC
SYNCTIME
M-MARK MONO/ST
2
4
M-MARK
STOP &
6
&
PAUSE *
14
4 Press REC (REC on the remote) to set this unit
to record pause mode.
The REC * indicators light up.
“REC Standby” and the amount of time available for recording
flash alternately in the display.
If you selected a track number or paused playback (in step
3) to record over a previous recording
“OverWrite OK?” appears in the display.
To confirm, press ENTER. This operation will erase the
selected track number (or point) and all subsequent material.
To cancel, press CANCEL (or &).
Adjust the recording level corresponding to the audio
input you selected in step 2. Refer to "Adjusting
Recording Levels" on this page for more details.
Note
When recording from a digital source that has a digital output
(volume) control, set the output level (volume) to “MAX”.
Recording may not be possible at low output levels (when the
digital volume is turned down).
5 Start playing the program source to be recorded.
6 Press #/* (PLAY # on the remote) to start
recording.
The TOC indicator lights up.
When the TOC indicator is lit, this means that the TOC
information has not yet been written to the disc. After
recording is complete, the TOC data is automatically written to
the disc.
To stop
Press & (STOP & on the remote).
To pause
Press #/* (PAUSE * on the remote).
Press again to resume recording.
To eject the MD
Press ) EJECT.
If the power to this unit is turned off while making a
recording, the TOC data cannot be correctly written to
the disc and the recorded data will be erased.
TOC writing may be impossible (or track number
marking may not perform as expected) when recording
a damaged CD or a broadcast source with
interference.
Adjusting Recording Levels
Setting the digital volume level
The volume level of digital audio sources is often similar,
however, level differences may be quite obvious between
different digital audio formats and even between one
recording and another. To maintain a consistent volume
level in MD recordings, it is possible to change the volume
of the input digital signal.
To select the digital signal to be recorded or monitored,
press INPUT repeatedly until the appropriate digital input
indicator (DIGITAL OPT. 1 or DIGITAL OPT. 2) appears in
the display. During record or record pause mode, turning
DIGITAL REC LEVEL adjusts the volume of the digital
signal. The digital volume can be adjusted up to +12 dB
and down to a minimum (MIN) level from the default volume
of 0 dB, the level of the input digital signal. To set the
volume level, play the digital source to be recorded and
adjust DIGITAL REC LEVEL so that highest peak causes
the 0 dB level indicators to flicker. The OVER indicators
should not light.
If recording is stopped, the digital recording level is
restored to the default volume of 0 dB.
Notes
When DIGITAL REC LEVEL is turned, the digital volume level
is adjusted in 0.5 dB steps between +12 dB and –20 dB, 1 dB
steps from –20 dB to –30 dB, 2 dB steps from –30 dB to –40
dB, followed by –44 dB, –48 dB, –54 dB, –62 dB and MIN.
Although some sources can be recorded with lower peak
levels, setting the peak levels too low may degrade the quality
of the recording.
The digital volume cannot be adjusted while a track title is
being entered.
Setting the analog recording level
Press INPUT repeatedly until the ANALOG indicator
appears in the display, and press REC (REC on the
remote) to put this unit in the record pause or monitor out
mode. For best results, play the loudest passage of the
source to be recorded and watch the recording level meter
in the display. Adjust ANALOG REC LEVEL so that the
highest peak causes the 0 dB level indicators to flicker.
The OVER indicators should not light.
L
R
dB
60 30 10 6 4 2 1 0 OVER00
––
Should not light
15
English
TIME RESCUE RECORDING
The Time Rescue (TIME) recording function allows you to
start recording six seconds before you press record.
During record pause mode, the MD recorder monitors the
input signal and continuously maintains a six second
memory “cache”. Therefore, you can record a song that
just started without cutting off the beginning. You may find
this function useful when recording live broadcasts, or
when you want to start recording from the beginning of a
song without recording lots of commercials (etc.).
1 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
2 Locate the point where you want to start
recording.
3 Press REC to set this unit to record pause
mode.
The REC * indicators light up.
“REC Standby” and the amount of time available for recording
flash alternately in the display.
To adjust the recording level of digital or analog input
sources, see “Adjusting Recording Levels” on page 14.
4 Press TIME to start recording when you hear the
beginning of a song you want to record.
Recording starts from the memory cache, allowing you to
record from a point approximately six seconds before you
pressed TIME.
1
3
4
CHAR.TITLE SETDELETENUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
s
MDX
CD-P
REC
SYNCTIME
M-MARK MONO/ST
MANUAL
Auto Marking
When making a recording, you can choose either
automatic or manual marking. This feature operates
somewhat differently for analog and digital signals. See
below for details.
Press M-MARK on the remote repeatedly to select
automatic (MANUAL indicator out) or manual
(MANUAL indicator lit) marking.
When recording analog signals
Auto : Track numbers are written in synchronization with
the input level of the signal being recorded. During
recording, if no sound is detected for more than 1.5
seconds, the recorder interprets this to be a gap between
two tracks. When the source signal is detected again, a
track number is automatically written.
Manual : One track number is written automatically when
you start recording, but none are written during recording.
To mark a track number, press M-MARK at the desired
position while recording.
Note
When using manual marking, the marks must be set at least 4
seconds apart.
When recording digital signals
Track numbers are written in the same positions as the original
source (CD, etc.) with either automatic or manual marking.
To add additional track numbers, set M-MARK to MANUAL
and press M-MARK at the desired position while recording.
Notes
When recording is paused, the portion recorded up to the
pause is counted as an individual track. When recording is
resumed, a new track number is created. On the other hand, if
one track is recorded in continuous repetition, that track is
recorded as one continuous track with a single track number.
During synchronized recording, manual track marking is not
possible.
16
MONAURAL RECORDING
Recording in monaural (mono) allows you to record up to
148 minutes of sound on one 74 minute MD. (When
recording in stereo you can record up to 74 minutes of
sound.) This may be useful when recording an interview,
debate, or whenever you want to record for a long time on
one disc.
1 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
2 Locate the point where you want to start
recording.
3 Press MONO/ST to light the MONO indicator.
4 Press REC .
The REC * indicators light up.
“REC Standby” and the amount of time available for recording
flash alternately in the display.
To adjust the recording level of digital or analog input
sources, see “Adjusting Recording Levels” on page 14.
5 Press PLAY # to start recording.
CHAR.TITLE SETDELETENUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
s
MDX
CD-P
REC
SYNCTIME
M-MARK MONO/ST
3
4
5
1
SYNCHRO RECORDING
The synchronized recording function lets you set this unit
to start recording automatically when a sound signal is
input. When operating this unit in combination with a
remote controllable Yamaha CD player, you can use the
CD-P button on this unit’s remote control to start playback
from the CD player.
1 Load the sound source into the source
component.
If necessary, program, or select the track you want to
start recording from before proceeding to the next
step. (Refer to the operation manual supplied with the
source component for instructions regarding its use.)
2 Press INPUT repeatedly to select the input
connected to the sound source you want to
record.
3 Locate the point where you want to start
recording.
4 Press SYNC to set this unit to record pause
mode.
The REC * indicators light up.
“Synchro REC” and the amount of time available for recording
flash alternately in the display.
During synchronized recording, analog input sources are
recorded at the current ANALOG REC LEVEL setting, digital
sources are recorded at the 0 dB level.
5 Start playing the sound source. (Press CD-P if
recording from a Yamaha CD player.)
The MD starts recording automatically when a sound signal is
input. When the sound signal stops, the unit switches back to
record pause mode and “Synchro REC” blinks in the display.
6 To continue recording, repeat step 5.
When you have finished recording, press & on
this unit to cancel the record pause mode.
Note
When the signals at the beginning of a track are at a lower level
than the level required to start synchronized recording, they are
not recorded. Should this occur, perform manual recording.
5
2
4
CHAR.TITLE SETDELETENUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
s
MDX
CD-P
REC
SYNCTIME
M-MARK MONO/ST
17
English
MONITOR OUT
When a disc is not loaded, you can use the monitor out
function to monitor the sound of the input source. This
allows you to enjoy better sound from your other digital
source components, such as CD, by using this unit as a
digital to analog converter.
1 Press ) EJECT to remove the disc.
2 Press INPUT repeatedly to select the input
connected to the sound source you want to
monitor.
3 Press REC.
“MONITOR OUT” appears in the display.
Sound from the selected input will be output from this unit’s
analog and digital output terminals.
4 Start playing the sound source selected in step 2.
The sound is output from the MD recorder’s analog and digital
output terminals.
To cancel
Press REC again, press &, or insert a disc.
Note
The digital volume can be adjusted when using the monitor out
function. However, please note that the digital volume setting is
restored to the default (0 dB) the next time a recording is made.
&#˜*
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
ANALOG
DIGITAL
REC LEVEL
1
3
2
18
EDITING
MOVE
This function lets you change the position of any track.
First, select the track you want to move, then specify the
track number you want to move it to. After the move, the
tracks located between the old and new positions are
renumbered automatically. You can perform this operation
repeatedly to completely reorder the disc.
1 Turn the jog dial to select the track you want to
move.
2 Press EDIT repeatedly to display “Move ?”, then
press ENTER.
“Move (track number)=(track number)” appears in the
display.
3 Turn the jog dial to select the track’s destination.
4 Press ENTER.
“Complete” appears momentarily in the display.
To cancel before moving the track
Press CANCEL (or &).
To undo MOVE
1 Press & to put this unit in stop mode.
2 Press EDIT repeatedly to display “Undo Move”, then
press ENTER.
“Undo OK ?” appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or &).
One of the main advantages of MD is its editing
capabilities. You can remove the commercials from a radio
broadcast, reorder songs into the order you want, remove
songs, combine songs, and even remove part of a song.
Edit functions
This unit offers the following editing operations.
(Please note that track numbers are updated automatically
when you perform a MOVE, ERASE, COMBINE or DIVIDE
operation.)
MOVE
Lets you move a track to a different track number.
ERASE
Lets you erase a track, the entire disc, or part of a
track. You can also erase the title of a disc, or the titles
of tracks on a disc.
COMBINE
Lets you combine two adjacent tracks.
DIVIDE
Lets you split a single track into two different tracks.
TOC WRITE
Lets you write TOC information to the disc so that
changes are saved.
FRA CHECK
Lets you recover disc space that may have been lost
after multiple edit operations.
UNDO
Lets you undo the previous edit operation if you make
a mistake (you cannot, however, undo the UNDO
function).
Note
After performing an edit operation, the TOC indicator lights to
show that the TOC information has not yet been written to the
disc. Undo is possible only when the TOC indicator is lit.
However, if you perform a recording operation (by pressing
REC, TIME, or SYNC), UNDO is not possible even if the TOC
indicator is lit.
ANALOG
DIGITAL
OPT. 1 2
COAX.
3244 148
DISC TRACK
TOTAL
REMAIN
RANDOM
Destination
Selected track
&#˜*
REC
)
EJECT
POWER
0
10
0
10
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA. DELETE EDIT SET
CANCEL ENTER
REC LEVEL PHONES LEVEL
INPUT
!
SEARCH
⁄
+
›
$ 
TIMER
OFF
PLAYREC
NATURAL SOUND MINIDISC RECORDER MDX–595
ANALOG
DIGITAL
REC LEVEL
2
CANCEL
&
1,32,4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Yamaha MDX-595 Användarmanual

Kategori
Minidisc-spelare
Typ
Användarmanual