Maximum TS-4000 Användarmanual

varumärke: Maximum

Modell: TS-4000

Kategori: TV-digitalboxar

Typ: Användarmanual

English User manual

Dansk

Brugervejledning

Svenska

Användarhandbok

MAXIMUM TS-4000

CX CI+ PVR

Item no.: 7857

MAXIMUM TS-4000

CX CI+ PVR

www.kjaerulff1.com

Certicate of Compliance

We Kjaerulff 1 Digital A/S

C.F. Tietgens Boulevard 19

5220 Odense SØ

Declare that the product: MAXIMUM TS-4000 CX CI+ PVR (item 7857),

is in conformity with:

RoHS 2002/95/CE

Electromagnetic Compatibility (EMC) Directive 2004/108/EC

Standards: EN55013: 2001+A1:2003+A2:2006, EN 61000-3-2: 2006,

EN61000-3-3: 1995 + A1:2001 + A2:2005 + A3:2008, EN 55020: 2007

Low Voltage Directive 2006/95/EC

Standards: EN60065: 2002 + A1:2006

Content of this manual is not to be copied, used or translated in part or as a whole

without prior consent in writing except approval of ownership of copyright and

Trademark acknowledgement and license notice

DVB - Digital Video Broadcasting

Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)

Declaration of Conformity No. 4296, 22nd August 2006

Dolby Digital

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

ENGLISH

Index

1. SAFETY WARNING ......................................................................................... 2

2. QUICK SETUP ................................................................................................. 4

3. GENERAL FEATURES .................................................................................... 6

4. HOW TO CONNECT YOUR RECEIVER ......................................................... 7

5. HARDWARE DESCRIPTION: .......................................................................... 9

6. WATCHING TV .............................................................................................. 13

7. MENU OPERATION ....................................................................................... 18

8. EDIT CHANNELS ........................................................................................... 19

9. INSTALLATION .............................................................................................. 21

10. SETTINGS ................................................................................................... 23

11. MULTIMEDIA (only with connected and operational external HDD) ............ 27

12. COMMON INTERFACE ............................................................................... 29

13. CONAX SMARTCARD READER ................................................................. 29

14. SYSTEM ...................................................................................................... 30

15. TROUBLESHOOTING ................................................................................. 31

16. MANUFACTURER INFORMATION ............................................................. 32

ENGLISH

1. SAFETY WARNING

This product has been manufactured to comply with international safety

standards. Please read the following safety precautions carefully.

MAINS SUPPLY: 90-260V AC 50/60Hz

Operate this product only from the type of power supply indicated on the

marking label. If you are not sure of the type of power supplied to your home,

consult your local power company.

Disconnect the product from the mains before you start any maintenance or

installation procedures.

OVERLOADING: Do not overload a wall outlet, extension cord or adapter as

this may result in electric fire or shock.

LIQUID: The product should not be exposed to liquid of any kind. In addition,

no objects filled with liquid should be placed on the apparatus.

CLEANING: Disconnect the product from the wall outlet before cleaning. Use

a light damp cloth (no solvents) to dust the product.

VENTILATION: The slots on top of the product must be left uncovered to

allow proper airflow into the unit.

- Do not stand the product on soft furnishings or carpets.

- Do not stack electronic equipment on top of the product.

ATTACHMENTS: Do not use any unsupported attachments as these may be

hazardous or cause damage to the product.

CONNECTION TO THE AERIAL: Disconnect the product from the mains

before connecting or disconnecting the cable from the aerial. Failure to do so

can damage the aerial.

CONNECTION TO THE TV: Disconnect the product from the mains before

connecting or disconnecting the cable from the TV. Failure to do so can

damage the TV.

EARTHING: The aerial cable must be buried in the ground.

LOCATION: Place the product indoors to avoid exposing it to lightning, rain or

sun.

- Do not place it near a radiator or heat register.

- Make sure it has more than 10cm clearance from

- Do not block the openings with any object, and do not place the product on a

bed, sofa, rug, or other similar surface.

- If you place the product on a rack or a bookcase, ensure that there is

adequate ventilation and that you have followed the manufacturer’s

instructions for mounting.

- Do not place the product on an unstable cart, stand, tripod, bracket, or table

where it can fall. A falling product can cause serious injury to a child or adult,

and serious damage to the appliance.

ENGLISH

LIGHTNING, STORM or NOT IN USE: Unplug the product from the wall

outlet and disconnect the antenna during a thunderstorm or when left

unattended and unused for long periods of time. This will prevent damage to

the unit due to lightning and power-surges.

EXTRANEOUS OBJECTS: Do not insert anything through the openings in

the unit, where they can touch dangerous voltage points or damage parts.

REPLACEMENT of PARTS: Replacement of parts may only be made by

service technician specified by the manufacturer.

WARNING

To avoid damage of the power cord or plug:

- Do not modify or process the power cord or plug arbitrarily.

- Do not bend or twist the power cord.

- Make sure to disconnect the power cord holding the plug.

- Keep heating appliances as far as possible from the power cord in order to

prevent the cover vinyl from melting.

- The main plug shall remain readily operable.

To avoid electrical shock:

- Do not open the main body.

- Do not insert metal or inflammable objects inside the product.

- Do not touch the power plug with wet hands.

- Disconnect the power cord in case of lightning.

To avoid damage of product:

- Do not use the product when it is out of order. If you continue to use the

product when defective, serious damage can be caused to it. Make sure to

contact your local product distributor if the product is out of order.

- Do not insert metal or alien substance into the slots for the modules or

smartcards.

It may cause damage to the product and reduce its life span.

The socket-outlet shall be installed near the equipment and shall be

easily accessible.

ENGLISH

2. QUICK SETUP

1. Check accessories

Please check the giftbox for completeness of accessories. Included should be:

Receiver, Remote Control, User Manual, 2 Batteries

2. Connect the Receiver to the TV Set

Connect your Receiver with your TV Set. Details can be found in the User

Manual under chapter 4. How to connect your receiver.

3. Connect the Receiver with the Satellite Antenna

Connect your Receiver with your Satellite Antenna. Details can be found in

the User Manual under chapter 4. How to connect your receiver.

4. Switch on the Receiver and TV Set

Switch on the AC-Power Switch on the rear side of the Receiver and then

press the Standby button in the Front of the Receiver Front (see User Manual

for more details: Chapter 5.2 Front Panel and 5.3 Rear Panel)

5. Insert the Batteries

Insert the 2 Batteries into the battery case on the underside of the Remote

Control. Please make sure that the Battery + and - Poles are correctly aligned.

6. Settings in the OSD Menu

After the Receiver has booted it will display the On-Screen Menu on your TV

Set. Should this not be the case, please check the connections as well as the

settings of your TV Set.

Please use the key on your

Receiver-Remote Control to choose the

Menu language and then please confirm

with the

key. After this please choose the

time zone and follow the instructions on

the screen to set-up your antenna and

perform a channel search

ENGLISH

Information about changes to the channel list please see chapter 8. Edit

Channels in the User’s Manual.

Under chapter 5.1 you can make yourself familiar with the functions of your

remote control

Under chapter 6 the TV- as well as Recording- and Playback-Functions of

your receiver are described

ENGLISH

3. GENERAL FEATURES

• SD / HD support (MPEG4 AVC/H.264)

• User friendly Installation

• 1 Common Interface Slot

• 1 Conax CAS7 Smartcard-Reader

• USB PVR Function (by using external HDD)

Time Shift Mode (by using external HDD)

1 Channel recording, 2nd Channel watching on same TP (by

using external HDD)

• Event Timer by EPG

• High Definition Video output : HDMI and YPbPr

• S/PDIF Dolby

• Subtitle support : OSD & VBI insertion for TV

• 8-Digit VF Display

• Channel sorting by FTA, CAS, Satellite, Alphabetic & Network

• Satellite Scan - Simultaneous Scan with 10 Satellites

• EPG : Now and Next and 7 days EPG

• Variable Input Symbol Rate (1-45 Msps)

• Video output resolution: 576p, 720p, 1080i, 1080p

• User selectable output resolution

• Multi language OSD

• Fast Channel Change

• Memory for up to 10,000 TV & Radio Channels

• PIG (Picture In Graphic)

• 8 Favorite List & Unlimited Programs per each

• Channel Edit Function

- Move, Delete, Favorite Edit

- Parental Lock, Channel Rename, Channel Skip

• Manual PID/ Satellite & TP/ Network Scan

• S/PDIF – optical (Digital Audio or Dolby AC3 stream out)

• Unicable, DiSEqC 1.2 and USALS Compatible

• Software Upgrade via USB

• Multifeed function for Operator Subchannels

ENGLISH

4. HOW TO CONNECT YOUR RECEIVER

Please note: HD Signals are not transferred via RCA-Video or SCART – For

HDTV Signals and also for the best quality on SDTV please use an HDMI

cable where possible.

4.1 Connecting the Receiver to TV by using HDMI and SCART-Cable

a. Connect the coaxial cable to “LNB IN” terminal marked at the rear of

MediaBox.

b. Connect the terrestrial Antenna to the port marked “ANT IN”

c. Connect the SCART connector marked “TV” to the respective

SCART port of the TV.

d. If the TV has a HDMI input, connect the product & TV using a HDMI

cable.

ENGLISH

4.2 Connecting the Receiver to your TV by using RCA cable

a. Connect the coaxial cable to “LNB IN” terminal marked at the rear of

MediaBox.

b. Connect the terrestrial Antenna to the port marked “ANT IN”

c. Connect the RCA cable to port “Audio L/R” of MediaBox to the

respective RCA port of TV.

4.3 Connecting the Receiver to your TV by using Component cable

a. Connect the coaxial cable to “LNB IN” terminal marked at the rear of

MediaBox.

b. Connect the terrestrial Antenna to the port marked “ANT IN”

c. Connect the Component cable to port “YPbPr” and “Audio L/R” of

MediaBox to the respective RCA ports of your TV Set.

d. Select Component in Menu “AV Setting”.

ENGLISH

5. HARDWARE DESCRIPTION:

5.1 Remote Control unit

POWER. By pressing this button, the receiver will go into

standby mode. When the receiver is in standby mode, it can

be awakened by pressing this button again.

MUTE. By pressing this button, all audio outputs of the

receiver are muted. When muted, Audio output can be

regained by pressing this button again.

HELP: Optional Function

TV FORMAT:

By pressing this button you can change the

Screen-Format. Should you experience Display problems

press repeatedly until your TV Set displays the best picture.

TV/RADIO. By pressing this button the user can jump between

TV and radio lists of the receiver.

MODE: By pressing this button you can determine the Screen-

Aspect Ratio

0-9 NUMBER. By pressing one of the number buttons (0 - 9),

the user can change channel or enter a number to menu.

ELECTRONIC PROGRAM GUIDE. By pressing this button,

the user can see current and forthcoming programming

information for each channel. 7-day program information guide

is also available by using this button.

RECALL: return to previously viewed channel

REWIND: During Playback of recorded files this button can be

used to rewind.

STOP: By pressing this button Playback or Recording can be

stopped.

PLAY

/PAUSE:

By pressing this button the archive on the

connected USB HDD is displayed. During Rewind or Fast

Forward this button returns to regular playback. Press PAUSE

to halt Playback.

FAST FORWARD: During Playback of recorded files this

button can be used to fast forward

RECORD: By pressing this button you can start a recording

(only if a USB HDD is connected and operational)

CURSOR UP: By pressing this button, the user can jump to

next channel on the channel list. In menu structure, user can

move up one row.

ENGLISH

CURSOR LEFT: By pressing this button, the user can

decrease the audio volume level of the receiver. In menu

structure, user can change between selectable options.

CURSOR RIGHT: By pressing this button, the user can

increase the audio volume level of the receiver. In menu

structure, user can change between selectable options.

CURSOR DOWN

By pressing this button, the user can jump

to previous channel on the channel list. In menu structure,

user can move down one row.

OK / ENTER: By pressing this button, the user can confirm a

selection or save settings in a menu.

MENU: By pressing this button, the user can activate the main

menu of the receiver.

EXIT

By pressing this button, the user can exit from the menu

without saving the made changes or go one step back in the

menu structure.

FILE: By pressing this button you can access the recorded

files on a connected USB Hard-Disk-Drive

SLOW MOTION: Slow motion playback

JUMP Back: Jump forward by 10 Channels in the Channel-List

JUMP Forward: Jump back by 10 Channels in the Channel-

List

RED / AUDIO: By pressing this button you can choose

alternative Audio tracks if provided by the channel operator.

GREEN / SUBTITLE: By pressing this button you can display

subtitles if provided by the channel operator

YELLOW / SLEEP TIMER: By pressing this button one or

more times, the user can determine the time after which the

receiver will automatically go into Standby.

BLUE / TELETEXT: By pressing this button, the user can

activate the teletext application.

WHITE / FAVORITE: By pressing this button you can open the

Favorite Channel Lists, if you have previosly programmed.

STATUS

STATUS: Optional Function

INFORMATION. By pressing this button, the user can see

present and following information about the currently watched

channel.

FIND

FIND: Search for a Channel by entering the first letters of the

name.

ENGLISH

5.2 FRONT PANEL

1. VF-Display

In operation displays the current channel name.

2. POWER KEY

Switches between turn-on and off (Standby). While the receiver is in standby

mode, the LED around the Power key will be lit.

3. / 4. CH - / CH +

Selection of TV-/Radio channels.

5. / 6. VOLUME - / VOLUME +

7. - 1 COMMON INTERFACE SLOT (Behind the flap)

One slot for a conditional access module (CAM). The Common Interface

(CI) is the slot on a digital television receiver into which a conditional

access module (CAM) may be inserted for satellite television. You can use

your Common Interface (CI) in combination with Conditional Access

Module (CAM) and get some extra channels on top of the existing free-to-

view channels .

- 1 CONAX SMARTCARD READER

One cardreader for Pay-TV Smartcards. If your TV operator scramble

their Programmes in CONAX, you can insert your smartcard into this

smartcard reader. Please insert with the chip facing downwards.

ENGLISH

5.3 Rear Panel

No. NAME FUNCTION

1 LNB OUT Loop Through for Satellite Signal

2 LNB IN Input for Satellite Signal

3 YpbPr Component out

4 ANT IN Input for terrestrial Signal

5 ANT OUT Loop Through for terrestrial Signal

6 EXT. IR Input for External IR (use original parts)

7 S/PDIF Optical Digital Audio output

8 USB port USB device connection

9 VIDEO Video Composite out

10 AUDIO L Audio Left out

11 AUDIO R Audio right out

12 HDMI HD Digital video/audio out

13 TV – SCART SCART - TV SCART OUT

14 POWER Power switch

ENGLISH

6. WATCHING TV

This chapter describes how to watch TV and listen to Radio using the receiver.

Thanks to the advantages of Digital TV transmissions, extra features are

added to the broadcast, such as information about the current and next

program and extra options such as the ability to choose between different

languages for Audio and Subtitling.

General watching

• Use the CHANNEL UP or CHANNEL DOWN keys to go to the next

and previous channel respectively.

• Use the NUMBER keys to input a channel number.

• Press the OK / ENTER key in Live TV Mode to display the channel

list.

• Use RECALL key on the remote control to select the channel that the

user was watching before the currently selected channel.

• Use TV/RADIO key on the remote control to toggle between the last

selected

• TV- or Radio Channel.

• Press UP or DOWN keys on the front panel of the receiver to select

the next/previous channel from the current channel list.

• Use INFO key to display the information banner about the current

program. Press INFO key again to display the information of the

current Event. With the CURSOR RIGHT or CURSOR LEFT you can

see the next event information. Press again INFO key or the EXIT

key to hide the banner and event information.

Please note: Programme information will only be displayed if it is included in

the current transmission. Availability and validity of program information is

dependent on the broadcaster.

6.2 Options

• Subtitling language (green key): The user can select from available

subtitle languages, if more than one exists. Selection from the available

choices is made with CURSOR UP or CURSOR DOWN key and

confirmation by OK key.

• Audio track (red key): Some TV channels broadcast multiple audio tracks,

for example different languages or AC3 Audio tracks. Selection from the

available choices can be made by pressing the CURSOR UP or CURSOR

DOWN keys and confirming with the OK key.

Beside alternative tracks, you can set the mode to Stereo or Mono-left or -

right.

ENGLISH

6.3 EPG (Electronic Programme Guide)

Now & Next as well as 7 days Programme Information

EPG application can be activated by pressing the EPG key when watching a

TV- programme or listening to a Radio Channel.

EPG application is divided into two levels. The first level gives an overview of

12 continuous channels with information about present and forthcoming

programmes.

By pressing the GREEN (TOGGLE) key the second level provides information

of all available events for the selected channel for the next 7 days. Availability

of Programme information data is dependent on the individual broadcaster.

By again pressing EXIT key you can close the EPG menu.

Navigating on the first level of EPG (Multi-EPG)

The Channel can be selected by

CURSOR UP or CURSOR DOWN and

confirmed by pressing OK key.

The Time-Line indicates which programmes are live at the present time.

Following Programmes can be selected with the CURSOR RIGHT key.

Detailed Information for the selected Programme can be seen by pressing the

i INFO key. By pressing the YELLOW key will show the events of previous

day and the BLUE key the events of the next day.

Provided you have a USB HDD connected and ready operational press RED

key (also on a current Event) to Record an Event.

Depending on how the EPG data is transmitted by the broadcaster it is

possible that Programme information is not available until one has actually

selected the channel. It is possible to select (tune into) the channel at the

cursor position by pressing the OK key. If there is more up-to-date information

available for this channel it will be updated on screen in short time.

ENGLISH

Navigating on the second level of EPG

By pressing the GREEN key (TOGGLE)

the second level EPG will appear. This

application provides complete EPG

information for the selected channel. It is

possible to scroll between programs in

chronological order for a particular day

with the CURSOR UP and CURSOR

DOWN keys.

After pressing the I INFO key detailed

information for the Programme will be

displayed. Press the EXIT- key to exit the detailed Information.

Please note: Programme information will only be displayed if provided by the

according channel.

6. 4 EPG-Timer (Timer programming via EPG)

In the Single- or Multi-EPG Mode you have the option to reserve programmes

in the timer. Move the cursor to the desired programme and simply press the

RECORD key.

An additional window is opened which

displays the timer reservations. If a HDD

is connected the recording will be made

accordingly to the connected external

HDD. If a HDD is not connected the

receiver will switch to the according

channel at the programmed time.

Please note: Should two timer reservations overlap, and error message will

be displayed. You then need to change or delete one of the two reservations.

Use the CURSOR UP and CURSOR DOWN keys to move to the reservation

you want to change and either delete a reservation with the RED key or

change the start or duration time using the BLUE key.

ENGLISH

6.5 Teletext

Teletext application can be activated/deactivated by pressing the TEXT /

BLUE key. The following operations are supported after activating Teletext:

• After activating text page 100 will appear after a short time.

• Specific Teletext pages can be selected using the number keys. If

the Teletext page is currently not available, the last selected page

will remain on the screen.

• The next Teletext page can be selected with the CURSOR UP key.

• The previous Teletext page can be selected with the CURSOR

DOWN key.

6. 6 PVR Functions

When connecting an external Hard-Disk-Drive to the USB port, the Receiver

can be used as a PVR (Digital Video recorder). During recording you have the

option to watch another channel provided it’s on the same Transponder. The

channels which are thus available during recording are highlighted in white

characters. Accordingly, the channels in grey characters cannot be viewed

during recording.

6. 6. 1 Direct recording

To start a recording press the RECORD key, choose a duration with the LEFT

/ RIGHT keys and confirm with the OK key.

6. 6. 2 EPG Recording

Via the EPG you can programme a Timer reservation – Please also see 6.4.

for more details.

6. 6. 3 TimeShift-Function

During Live TV you can press the PAUSE

key to activate the TimeShift function. The

Receiver pauses the programme. With the

PLAY key you can continue to watch the

timeshifted programme.

With the EXIT key or after changing to another channel the TimeShift function

is de-activated.

ENGLISH

6. 6. 4 Playback

After pressing the FILE LIST key a list is

displayed which contains all the recorded

programmes on your connected external

USB HDD. Use the UP /DOWN keys to

move the cursor to the desired

programme and confirm with the OK key

to start playback.

Also, you can Rename (BLUE), Delete

(RED) or Lock (GRAY) a recording.

If supported by the Channel operator, by

pressing the INFO key in the file list or during playback details about the

recorded programme are displayed.

By pressing the FAST FORWARD or

REWIND keys you can increase the

playback speed to 2, 4, 8 and 16x in both

directions. By pressing the FF or REW

and then the SLOW key during playback

you can playback in Slow motion either

forwards or backwards. Repeadedly press

to change the playback speed from 1/2,

1/4, 1/8.

To stop playback press the STOP key. By

pressing the EXIT key you can return to the live channel.

Please note:

Functions such as Recording, Timeshift and Playback require an

external HDD to be connected via USB (2.0) and to be ready operational.

Only FAT32 formatted Hard-Disk-Drives can be used. Other formats

cannot be recognized by the receiver.

ENGLISH

7. MENU OPERATION

The main menu can be activated by pressing the MENU key.

Main menu provides access to most important features of the receiver. These

features are divided into following Menus. Each Menu contains corresponding

sub-menus. The Main Menus are as following:

• Edit Channels

• Installation

• User Setup

• Entertainment

• Common Interface

• Conax CA

• Status

You can move between the Main Menu by pressing the CURSOR LEFT or

CURSOR RIGHT key. The available Sub-Menus can be seen by pressing the

CURSOR DOWN key and confirmation by OK key.

You can exit menu without saving the changes made by pressing EXIT key

while pressing the OK key will exit the Submenu and save the changes.

Sidan laddas ...

Maximum TS-4000 Användarmanual

varumärke: Maximum

Modell: TS-4000

Kategori: TV-digitalboxar

Typ: Användarmanual

Ladda ner pdf

Rapportera

på andra språk

English: Maximum TS-4000 User manual
dansk: Maximum TS-4000 Brugermanual

Maximum TS-4000 Användarmanual

Maximum TS-4000 Användarmanual

på andra språk

Relaterade papper

Andra dokument