Altec Lansing IMT800 Bruksanvisning

Kategori
Dockningshögtalare
Typ
Bruksanvisning

Denna manual är också lämplig för

Altec Lansing Mix
Portable Speaker for iPhone
and iPod
®
Mega enceinte pour iPhone
et iPod
®
Altec Lansing Mix
Altavoces portátiles Altec Lansing Mix
para iPhone
e iPod
®
Alto-falante portátil Mix
da Altec Lansing para iPhone
e iPod
®
Sistema di altoparlanti portatile Altec Lansing Mix
per iPhone
e iPod
®
Digitale Boombox Altec Lansing Mix
für iPhone
and iPod
®



®
Altec Lansing Mix
kannettava kaiutin laitteille iPhone
ja iPod
®
Altec Lansing Mix
bärbara högtalare för iPhone
och iPod
®
iMT800
User Guide Guia do Usuário 
Guide d’utilisation Manuale utente Käyttöopas
Guía del usuario Bedienungsanleitung Bruksanvisning
ii
Welcome
Thank you for purchasing the Altec Lansing Mix speaker system. Designed
specifically to work with your iPhone and iPod, this system provides high-
quality audio and radio performance that brings out the best in your music.
This Altec Lansing speaker system is compatible with all iPhone and iPod
models.
Please carefully read this User Guide for instructions on setting up and
using your Mix speaker system.
Prior to installing or operating the Altec Lansing Mix speaker system, refer
to the important product safety information.
Getting Assistance
If you cannot find the answer to your setup and performance questions
in this package, you can also consult the FAQs in the customer support
section of our Web site at www.alteclansing.com. If you live in North
America and still can’t find the information you need, please call our
customer service team for assistance before returning the product to your
retailer under their return policy.
Tel: 800-258-3288 (Toll Free in US and Canada)
If you live outside of North America, please visit our website at
www.alteclansing.com and select your region to locate your
country’s distributor.
International Distribution
International customers: For information regarding the distribution of Altec
Lansing products in your country, please visit www.alteclansing.com and
click on your region.
Registering Your Product
Visit www.alteclansing.com to register your product online, so we can
provide you with the best possible service and technical support.
FCC Compliance
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
1
EN
BATTERIES
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type. Do not expose to excessive heat such as sunshine, fire, or
the like. The battery used in this product must be properly recycled or disposed of.
Instructions for removing the battery can be found in the Quick Start Guide. Please
contact your local recycling center for proper battery handling and disposal instructions.
POWER SOURCE
Use only power supplies of the type specified in the operating instructions or as marked
on the appliance. If a separate power supply is included with this apparatus, do not
substitute with any other power supply – use only manufacturer-provided power supplies.
CAUTION
To prevent electric shock do not use this (polarized) plug with an extension cord,
receptacle or other outlet unless the blades can be fully inserted to prevent blade
exposure.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain
or moisture.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. This apparatus shall not be exposed to
dripping or splashing, and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15. Do not install in an area which impedes the access to the power plug. Disconnecting
the power plug is the only way to completely remove power to the product and must
be readily accessible at all times.
The lightning flash with arrowhead, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
Caution: To prevent the risk of electric shock, do not remove cover
(or back). No user-serviceable parts inside. Refer servicing to
qualified service personnel.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
Safety Information
2
Contents
Welcome ............................................................................................................................................................................................................................... ii
Safety Information ................................................................................................................................................................................................................1
Package Contents ................................................................................................................................................................................................................3
Getting Started ..................................................................................................................................................................................................................... 4
Placing and Removing Adapters for the iPhone and iPod ................................................................................................................................................... 5
Speaker Features and Indicators ......................................................................................................................................................................................... 6
Speaker Controls .................................................................................................................................................................................................................. 7
Clip-On Remote Features .....................................................................................................................................................................................................9
Listening to Your iPhone or iPod ........................................................................................................................................................................................ 11
Setting EQ Controls ............................................................................................................................................................................................................ 13
Charging your iPhone or iPod ............................................................................................................................................................................................15
Listening to the FM Radio .................................................................................................................................................................................................. 15
Listening to Additional iPhone, iPod, Non-Docking iPod or Other Audio Devices ............................................................................................................16
Personalizing the Power-On Message ............................................................................................................................................................................... 17
Maintaining Your Speaker System .....................................................................................................................................................................................17
Troubleshooting ..................................................................................................................................................................................................................18
Warranty ............................................................................................................................................................................................................................. 21
3
EN
Package Contents
AC adapter
Clip-on remote
Two 3.5 mm stereo cables
Altec Lansing Mix speaker system
Miscellaneous adapters
for iPhone and iPod
4
Getting Started
How to Install the AC Adapter
1 Connect the AC adapter cable plug
into the speaker system’s jack.
The jack is located on the back of
the system.
2 Plug the AC adapter into the
wall outlet.
How to Install the Speaker Batteries
Your Altec Lansing Mix speaker system can also be powered by 8 D-size
(LR20) batteries (not included). To install the batteries, follow the steps below:
1 Make sure that there is no iPhone
or iPod in the system’s dock
and that no other devices are
connected to the system.
2 Unplug the AC adapter from the
Mix speaker system.
3 Open the battery compartment.
The battery door is located on the bottom of the Mix speaker system.
To access it, place the unit on its back, so that the speakers are
facing the ceiling. Then simply pull the tabs to open the battery
compartment.
Caution: Do not place the unit on its top side. This may damage the
volume knob.
4 Install 8 D-size (LR20) batteries (not included) in the battery
compartment.
Make sure the batteries are correctly installed as illustrated in the
battery compartment. The batteries will provide up to 30 hours of
continuous playing time.
5 Replace the battery door.
NOTE Please discard used batteries properly.
NOTE When you are finished listening to your portable audio device,
please remember to turn both it and your speaker system off to conserve
electricity.
How to Install the Clip-On Remote Battery
The clip-on remote battery (included) is not installed at the factory. To install
the battery, follow the steps below. The battery compartment is at the back
of the remote. Push the battery compartment door in the direction of the
arrow to unlock it.
1 Open the battery door.
The battery door is located on the back
of the remote. Using your thumb, push
the battery door toward the carabiner
clip. Then lift the battery door open.
2 Position the battery (included) so it
sits in the battery holder correctly.
Make sure the polarity (the + and – sides of the battery) is correct.
3 Replace the battery door.
NOTE Please discard used batteries properly.
5
EN
Placing and Removing Adapters for the iPhone and iPod
Your Altec Lansing Mix speaker system includes removable adapters for
today’s popular iPhone and iPod models. These adapters ensure that your
iPhone and iPod properly fit in the speaker system’s dock. As new iPhone
and iPod models are introduced, new adapters will be made available to
customers. You may also use the adapter supplied with your iPhone or
iPod, or available for purchase at www.apple.com.
How to Place an Adapter
1 Select the correct adapter for your
iPhone or iPod.
Using the correct adapter ensures a
proper fit for your iPhone or iPod.
2 Gently press the iPhone or iPod
adapter into the dock.
Now you can carefully place your
iPhone or iPod into the dock.
NOTE Your iPhone or iPod cannot be in
a case.
How to Remove an Adapter
1 Remove your iPhone or iPod.
2 Grip the adapter and pull gently upward.
6
Speaker Features and Indicators
Universal docking station for iPhone or iPod
Guard for iPhone or iPod
LCD display
Battery indicator
FM stereo indicator
Source button
Track forward button
EQ button
AC adapter jack
Two AUX jacks
FM antenna
Power/volume increase/
volume decrease knob
Track back button
7
EN
Speaker Controls
Turn on your speaker system
Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started
section for more information. Press the
knob.
Turn off your speaker system
Press the
knob. Whenever you are finished using your speaker system, please remember to turn it and
your iPhone, iPod or other MP3 player off to conserve electricity.
Change audio source Press the “SOURCE” button to cycle through and select the audio source: iPod, FM radio, AUX 1 or AUX 2.
Set the graphic equalizer
See the Setting EQ Controls section for specific information on selecting EQ presets and adjusting the
7-band graphic EQ.
Turn up the volume
Rotate the
knob clockwise.
Turn down the volume
Rotate the
knob counter-clockwise.
Skip to the beginning of the current song
on your iPhone or iPod
In “iPod” mode, press the
button.
Rewind the currently playing track on your
iPhone or iPod
In “iPod” mode, press and hold the
button.
Skip to the beginning of the next song
on your iPhone or iPod
In “iPod” mode, press the
button.
Fast-forward the currently playing track
on your iPhone or iPod
In “iPod” mode, press and hold the
button.
Tune radio stations In “FM” mode, use the
and buttons. See the Listening to the Radio section for additional information.
8
Scan radio stations
In “FM” mode, press and hold the
or button. See the Listening to the Radio section for additional
information.
Listen to an additional iPhone, iPod, non-
docking iPod or other portable audio device
See the Listening to Additional iPhone, iPod, Non-Docking iPod or Other Portable Audio Devices section
for specific information on using devices attached to your speaker system’s AUX jacks.
Enter a personalized power-on message See the Personalizing the Power-On Message section for specific information on using this feature.
Reset all settings
With the speaker system turned on, press the
and buttons simultaneously for a few seconds. Once
the word “RESET ?” is displayed on the screen, press the
button to reset all settings.
Select FM Band region
Reset all settings (see above), and use the
and buttons to select the region closest to you (“REGION
1: USA,” “REGION 2: EUROPE/ASIA,” “REGION 3: JAPAN WIDE” or “REGION 4: JAPAN”). Then, press
the
knob to save your selection.
Check battery status
If the Mix is being powered by batteries, you can see how much battery power you have left. Press and
hold the “SOURCE” button to display the amount of battery power remaining and press it again to exit
this mode. The unit will automatically exit this mode after a few seconds.
Speaker Controls
9
EN
Clip-On Remote Features
The clip-on remote lets you operate many functions of your Altec Lansing Mix
speaker system:
Turn on your speaker system
Press the button.
Turn off your speaker system
Press the
button.
Change audio source
Press the “SOURCE” button to cycle
through and select the audio source:
iPod, FM radio, AUX 1 or AUX 2.
Turn up the volume Press the “+” button.
Turn down the volume Press the “–” button.
Skip to the beginning of the current
song on your iPhone or iPod
In “iPod” mode, press the
button.
Rewind the currently playing
track on your iPhone or iPod
In “iPod” mode, press and hold the
button.
Skip to the beginning of the next
song on your iPhone or iPod
In “iPod” mode, press the
button.
Fast-forward the currently playing
track on your iPhone or iPod
In “iPod” mode, press and hold the
button.
Set the graphic equalizer
See the Setting EQ Controls section for
specific information on selecting EQ presets
and adjusting the 7-band graphic EQ.
Power on/off buttonSource button
Play/pause button
Volume increase
button
Volume decrease
button
Track back button Track forward button
FM preset buttons
Carabineer clip
FM preset buttons
EQ button
10
Play/pause a song on your iPhone or iPod
In “iPod” mode, press the
button to begin playing a selected track. Press the button again
to pause it.
Tune radio stations
In “FM” mode, use the
or buttons. See the Listening to the Radio section for additional
information.
Seek radio stations
In “FM” mode, press and hold the
or button. See the Listening to the Radio section for
additional information.
Store a radio station
In “FM” mode, tune to the station you’d like to store, and then press and hold one of
the PRESET buttons (P1, P2, P3 or P4). See the Listening to the Radio section for
more information.
Select a preset radio station
In “FM” mode, press the PRESET button (P1, P2, P3 or P4) that corresponds to the station
you’d like to hear. See the Listening to the Radio section for more information.
NOTE For best results, aim the clip-on remote toward the Mix speaker system.
Clip-On Remote Features
11
EN
Listening to Your iPhone or iPod
1 Dock your iPhone or iPod in the
Altec Lansing Mix speaker system.
Make sure the correct adapter for
iPhone or iPod is inserted in the
speaker system’s dock. Slide the guard
down to protect the iPhone or iPod.
2 Select “iPod” mode.
Press the “SOURCE” button on your
speaker system or clip-on remote until the iPod icon appears on
the LCD.
3 Press the button on your iPhone, iPod, or clip-on remote.
Music from your iPhone or iPod will start playing. The speaker system
and the clip-on remote are capable of controlling basic functions of
3rd-generation iPod models, the iPod touch, the iPod nano and the
iPhone.
4 Adjust the volume.
Rotate the
knob on the Altec Lansing speaker system to adjust the
system volume. Or, use the “+”and “–” buttons on the clip-on remote.
5 Find your desired song.
Press the
or button on your speaker system or clip-on remote to
go to the next or previous track. Press and hold the
or button on
your speaker system or clip-on remote while the track is playing for
high-speed forward or reverse music search of the current track.
NOTE To conserve battery power, reduce the speaker system volume level.
NOTE During battery-only operation, the speaker system automatically
shuts down if no audio is detected for a few minutes. This is to conserve
battery power. Press the
button on the speaker system or the button
on the clip-on remote to turn the speaker system back on.
NOTE The speaker system is compatible with the alarm clock and sleep
timer features built into select iPhone and iPod models. For these features
to work properly, the speaker system must be connected to a wall outlet.
When an iPhone or iPod is docked, the speaker system will not shut down
automatically, enabling the alarm or sleep timer to play through the speaker
system. See the user guide for iPhone or iPod for details on how to access
these features.
NOTE During AC operation, if there is no iPhone or iPod docked and
no audio input signal is detected for a few minutes, the speaker system
automatically shuts down to conserve energy. Press the
button on the
speaker system or the
button on the clip-on remote to turn the speaker
system back on.
12
How to Access Additional Features on Your iPhone or iPod Using
the Clip-on Remote
First, select “iPod” mode.
Press the “SOURCE” button on your speaker system or clip-on remote until
the iPod icon appears on the LCD.
Shuffle function
Press the P1 button once on the
clip-on remote to advance to the next
shuffle mode:
“Shufe S” is displayed when the
system is in song shuffle mode.
“Shufe A” is displayed when the
system is in album shuffle mode.
“Shufe Off” is displayed when
the shuffling function has been
turned off.
Note: Use the P2 button on some
older iPod models. Functionality may
vary per iPhone or iPod model.
Repeat function
Press the P2 button once on the
clip-on remote to advance to the next
repeat mode:
“Repeat 1” is displayed when the
system is in the repeat one mode.
“Repeat” is displayed when the
system is the repeat all mode.
“Repeat Off” is displayed when the
repeat function has been turned off.
Note: Use the P1 button on some
older iPod models. Functionality may
vary per iPhone or iPod model.
Access the previous playlist
Press the P3 button on the clip-on
remote.
Access the next playlist
Press the P4 button on the clip-on
remote.
Listening to Your iPhone or iPod
13
EN
Setting EQ Controls
How to Set the Bass and Treble Control Using the Onboard Controls
1 Access the bass and treble settings.
Press the “EQ” button once. The Bass Control screen will appear on
the LCD.
2 Increase or decrease the bass level.
Rotate the
knob.
3 Enter the Treble Control screen.
Press the EQ button again. The Treble Control screen will appear.
4 Increase or decrease the treble level.
Rotate the
knob.
5 Exit the Treble Control screen.
Press the “EQ” button again. Or the unit will automatically exit this
screen after a few seconds.
How to Set the Bass and Treble Control Using the Clip-On Remote
1 Access the bass and treble settings.
Press the “EQ” button once. The Bass Control screen will appear on
the LCD.
2 Increase or decrease the bass level.
Press the “+” or “–” buttons.
3 Enter the Treble Control screen.
Press the “EQ” button again. The Treble Control screen will appear.
4 Increase or decrease the treble level.
Press the “+” or “–” buttons.
5 Exit the Treble Control screen.
Press the “EQ” button again. Or the unit will automatically exit this
screen after a few seconds.
How to Change the EQ Presets Using the Onboard Controls
1 Access the EQ presets.
Press and hold the “EQ” button for approximately 3 seconds.
2 Select your desired preset.
Press the
or buttons to cycle through the four EQ presets.
Presets include: 1) ALTEC EQ, 2) ROCK, 3) HIP HOP, and 4) POP.
3 Exit the EQ Preset screen.
Press the “EQ” button again. Or the unit will automatically exit this
screen after a few seconds.
NOTE: To reset the EQ Presets to factory settings, press and hold the EQ
button for a few seconds.
How to Change the EQ Presets Using the Clip-On Remote
1 Access the EQ presets.
Press and hold the “EQ” button for approximately 3 seconds.
2 Select your desired preset.
Press the
or buttons to cycle through the four EQ presets.
Presets include: 1) ALTEC EQ, 2) ROCK, 3) HIP HOP, and 4) POP. Or,
press P1 for ALTEC EQ, P2 for ROCK, P3 for HIP HOP or P4 for POP.
3 Exit the EQ Preset screen.
Press the “EQ” button again. Or the unit will automatically exit this
screen after a few seconds.
14
NOTE You can personalize the EQ presets by selecting a Preset EQ then
pressing the “EQ” button twice to enter the Bass/Treble Control Mode.
There you can make adjustments to the Preset EQs as described in the
Bass and Treble Control sections. Changes are saved automatically.
NOTE: To reset the EQ Presets to factory settings, press and hold the EQ
button for a few seconds.
How to Adjust the 7-Band Graphic EQ Using the Onboard Controls
For even greater personalization of your music, you can dial in your sound
with the onboard 7-band graphic EQ.
1 Enter the Graphic EQ Mode.
Press and hold the “EQ” button while you press the
or buttons.
2 Select a frequency slider for adjustment.
Press the
or buttons until the desired slider is highlighted.
3 Increase or decrease the level of the frequency slider.
Rotate the
knob.
4 Select the next frequency slider for adjustment.
Press the
or buttons until the next desired slider is highlighted.
5 Increase or decrease the level of the frequency slider.
Rotate the
knob.
6 Continue selecting and adjusting frequency sliders as desired.
7 Exit the Graphic EQ Mode.
Press the “EQ” button again. Or the unit will automatically exit this
mode after several seconds.
NOTE: To reset the Graphic EQ to factory settings, press and hold the “EQ”
button for a few seconds.
How to Adjust the 7-Band Graphic EQ Using the Clip-On Remote
1 Enter the Graphic EQ Mode.
On the speaker system, press and hold the “EQ” button while you
press the
or buttons.
2 Select a frequency slider to adjust.
Press the
or buttons on the clip-on remote until the desired slider
is highlighted.
3 Increase or decrease the level of the frequency slider.
Press the + or “–” buttons on the clip-on remote.
4 Select the next frequency slider to adjust.
Press the
or buttons on the clip-on remote until the next desired
slider is highlighted.
5 Increase or decrease the level of the frequency slider.
Press the “+” or “–” buttons on the clip-on remote.
6 Continue selecting and adjusting frequency sliders as desired.
7 Exit the Graphic EQ Mode.
Press the “EQ” button on either the clip-on remote or the speaker
system. Or the unit will automatically exit this mode after several
seconds.
NOTE: To reset the Graphic EQ to factory settings, press and hold the “EQ”
button for a few seconds.
Setting EQ Controls
15
EN
Whenever your iPhone or iPod is docked and your Altec Lansing inMotion
Max speaker system is plugged into an AC outlet, your iPhone or iPod is
charging (until fully charged) – even if the speaker system is switched off.
CAUTION: The iPhone or iPod will not charge when the speaker system is
operating on batteries.
Listening to the FM Radio
1 Extend the FM antenna fully for
best FM reception.
2 Select “FM” mode.
Press the “SOURCE” button on your
speaker system or clip-on remote until
“FM” appears on the LCD.
3 Tune to the station you want to
listen to.
Use the
or buttons on your
speaker system or enhanced remote to
tune in the desired station. Press and
hold these same buttons to find the next clear FM station.
4 Adjust the volume.
Use the
knob on your speaker system to adjust the system
volume. Or, use the “+” and “–” buttons on the clip-on remote.
How to Store Preset Stations
Your Altec Lansing Mix speaker system’s clip-on remote enables you to
program up to 4 FM station presets:
1 Tune to the station you wish to store.
While in “FM” mode, use the
or buttons on your speaker system
or clip-on remote to tune to the desired station.
2 Store the station.
Press and hold the P1, P2, P3 or P4 button on the clip-on remote for
a few seconds. You can store one FM station in each preset.
3 To store other stations, repeat the above steps.
How to Recall Preset Stations
1 Make sure you are in “FM” mode.
If you’re not in “FM” mode, press the “SOURCE” button on your
speaker system or clip-on remote until “FM” appears on the LCD.
2 Press a PRESET button (P1, P2, P3 or P4) on the clip-on
remote.
The radio will tune to your preset station.
3 Adjust the volume.
Use the
knob on your speaker system to adjust the system
volume. Or, use the “+” and “–” buttons on the clip-on remote.
Charging Your iPhone or iPod
FM
16
If you or a friend has an iPhone, iPod, non-iPod MP3 player or other
non-docking audio device, you can enjoy it through your Altec Lansing
Mix speaker system as well. Just connect it via the AUX 1 or AUX 2 jack.
Here’s how:
1 Locate one of the two 3.5 mm
stereo cables ( included).
2 Plug one end of the stereo cable
into your device.
Your device should have either a
headphone or LINE OUT jack for you
to plug into.
3 Plug the other end of the stereo
cable into your speaker system’s
AUX 1 or AUX 2 jack.
The AUX jacks are located on the top of the speaker system next to
the handle.
4 Select “AUX 1” or “AUX 2” mode.
Press the “SOURCE” button on your speaker system or the clip-on
remote until “Auxiliary Input 1” or “Auxiliary Input 2” appears on the
speaker system’s LCD.
5 Turn on your device and start playing it.
6 Adjust the volume.
Use the
knob on the speaker system to adjust the volume. Or, use
the “+” and “–” buttons on the clip-on remote.
NOTE You may need to adjust the device volume also. Your device’s
volume should be set to approximately ¾ volume.
Listening to Additional iPhone, iPod, Non-Docking iPod or Other Audio Devices
17
EN
Whenever you turn on your Altec Lansing Mix speaker system, the
Altec Lansing logo will appear for approximately 3 seconds followed
by a personalized message, if you’ve set one. The Mix comes with no
preset power-on message. To create a personalized message, just follow
these instructions:
1 Enter the Message Screen Edit Mode.
Press and hold the “SOURCE,” “EQ,”
and buttons. All four
buttons must be pressed at approximately the same time while the
Altec Lansing logo is displayed. The following message will appear on
the LCD: “Add a personal message by selecting letters with the track
buttons and rotary control.”
2 Add your personal message.
Rotate the
knob until the desired letter, number or symbol is
displayed. Press the
button to make your selection and move to
the next space. Continue this process until your entire message is
displayed.
3 Exit the Message Screen Edit Mode.
Press the
knob to save the message and exit the Message Screen
Edit Mode.
How to Delete a Personalized Message
1 Enter the Message Screen Edit Mode.
Press and hold the “SOURCE,” “EQ,”
and buttons. All four
buttons must be pressed at approximately the same time while the
Altec Lansing logo is displayed. The following message will appear on
the LCD: “Add a personal message by selecting letters with the track
buttons and rotary control.”
2 Clear the message.
Press the “SOURCE” button to clear the message.
3 Exit the Message Screen Edit Mode.
Press the
knob to exit the Message Screen Edit Mode.
Maintaining Your Speaker System
Place your speaker system on a level surface away from sources of direct
sunlight or excessive heat.
Protect your furniture with a cloth or other protective material when placing
your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials, can damage the surface of the unit.
Personalizing the Power-On Message
18
Troubleshooting
Symptom Possible Problem Solution
Speaker system doesn’t
respond (no power)
AC adapter isn’t plugged into a wall outlet
or the connector isn’t plugged into the
power supply jack on the back of the
speaker system.
Plug the AC adapter into a wall outlet and plug the connector into the power
supply jack on the back of the speaker system.
Wall outlet is not functioning. Plug another device into the same outlet to confirm the outlet is working.
The batteries are dead. Replace with new batteries. (See the Getting Started section for details.)
The power isn’t turned on.
Turn on the speaker system by pressing the
button. The LCD display
turns on.
iPhone or iPod doesn’t
dock properly
Using the wrong adapter for iPhone or
iPod or no adapter.
Make sure the adapter is the proper fit for your iPhone or iPod.
iPhone or iPod didn’t install properly. Remove your iPhone or iPod from the dock and check for obstruction on the
connectors in the dock and on your iPhone or iPod. Then reseat it in the dock
and slide the guard down to protect it.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200

Altec Lansing IMT800 Bruksanvisning

Kategori
Dockningshögtalare
Typ
Bruksanvisning
Denna manual är också lämplig för