91819245_OP020_120x170_ROWE.indd 191819245_OP020_120x170_ROWE.indd 1 15.10.20 15:0715.10.20 15:07
Stapled booklet, 120 x 170 mm, 110 pages (incl. 6 pages cover),
Cover 4c, Inhalt
= black + PMS 288 C
English 5
Deutsch 14
Français 25
Español 35
Português 45
Italiano 56
Nederlands 66
Dansk / Norsk 77
Svenska 89
Suomi 99
Internet:
www.oralb.de
www.oralb.com
www.braun.com
www.service.braun.com
Braun GmbH
Frankfurter Straße 145
61476 Kronberg/Germany
Charger Type 3768
Handle Type 3758
Travel Case Type 3759
Smart Plug Type
492-xxxx
91819245/X-20
GB/DE/FR/ES/PT/IT/NL/DK/NO/SE/FI
DE
AT
00 800 27 28 64 63
CH
08 44 - 88 40 10
UK
0 800 731 1792
IE
1 800 509 448
FR
0 800 944 803
(service et appel gratuits)
BE
0 800 14 592
LU
800 21172
ES
900 814 208
PT
808 20 00 33
IT
800 124 600
NL
0800-4 45 53 88
DK
70 15 00 13
NO
22 63 00 93
SE
020 - 21 33 21
FI
020 377 877
91819245_OP020_120x170_ROWE.indd 10991819245_OP020_120x170_ROWE.indd 109 15.10.20 15:0715.10.20 15:07
6
4
5
3
2
1
91819245_OP020_120x170_ROWE.indd 291819245_OP020_120x170_ROWE.indd 2 15.10.20 15:0715.10.20 15:07
8
7
222119 20
18
26
100%
1:30
2524
23
27
9
17161514
11
12 1310
91819245_OP020_120x170_ROWE.indd 391819245_OP020_120x170_ROWE.indd 3 15.10.20 15:0715.10.20 15:07
ab
cd
gh
ef
h2
h1
91819245_OP020_120x170_ROWE.indd 491819245_OP020_120x170_ROWE.indd 4 15.10.20 15:0715.10.20 15:07
5
Description
1 Brush head
2 Brush head identification symbol
3 Smart Pressure Sensor (Light Ring)
4 Interactive Display
5 Handle
6 Charger
7 On/off button
8 Mode button
9 Interactive Display features
10 «Daily Clean» mode
11 «Sensitive» mode
12 «Gum Care» mode
13 «Whitening» mode
14 «Intense Clean» mode
15 «Super Sensitive» mode
16 «Tongue Clean» mode
17 Settings menu
18 Settings menu features
19 Manage Bluetooth
®
settings
20 Select/Change colour of Light Ring
21 Select/Change language
22 Perform factory reset
23 Feedback features
24 Timer
25 Battery status
26 Exchange reminder
27 Brush feedback
Accessories and features:
a Smart Pressure Sensor features
b Customize colour of Light Ring
via Oral-B App
c Brush head «Ultimate Clean»
d Brush head «Gentle Care»
e Brush head holder with cap
f Brush head holder stand
g Travel case
h Charging travel case
h1 Charging light
h2 Power supply (Smart Plug)
i Download Oral-B App and connect to
Bluetooth
®
(see back page)
Note: Content may vary based on the model
purchased.
91819245_OP020_120x170_ROWE.indd 591819245_OP020_120x170_ROWE.indd 5 15.10.20 15:0715.10.20 15:07
6
Welcome to Oral-B!
Before operating this toothbrush, please read
these instructions and save this manual for
future reference.
IMPORTANT
Periodically check the entire
product/cords/accessories
for damage. A damaged or
non-functioning unit should
no longer be used. If the
product/cords/accessories
are damaged, take it to an
Oral-B Service Centre. Do
not modify or repair the
product. This may cause fire,
electric shock or injury. Never
insert any object into any
opening of the appliance.
Usage by children under age
3 is not recommended.
Toothbrushes can be used by
children and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge, if
they have been given super-
vision or instruction concern-
ing use of the appliance in a
safe way and understand the
hazards involved.
Cleaning and maintenance
shall not be performed by
children.
Children shall not play with
the appliance.
Use this product only for its
intended use as described
in this manual. Do not use
attachments which are not
recommended by the manu-
facturer. Only use the charger
provided with your appliance.
Only use the charger and/or
special cord set (smart plug)
with integrated Safety Extra
Low Voltage power supply
provided with your
appliance. Do not exchange
or tamper with any part of it,
otherwise there is risk of an
electric shock. If charging
stand/charging travel case is
marked with
492
492-xxxx,
only use Braun/Oral-B
special cord set (smart plug)
with this identification.
WARNING
Do not place the charger, smart plug or
charging travel case in water or liquid or
store where it can fall or be pulled into a
tub or sink. Do not reach for it when fallen
into water. Unplug immediately.
Avoid sharp bending, jamming or squeezing
of the cord.
This appliance contains batteries that are
non-replaceable. Do not open and disas-
semble device. For battery recycling please
dispose whole device according to local
environmental regulations. Opening the
handle will destroy the appliance and invali-
date the warranty.
When unplugging, always pull the power
plug instead of the cord. Do not touch the
power plug with wet hands. This can cause
an electric shock.
If you are undergoing treatment for any
oral care condition, consult your dental
professional prior to use.
English
91819245_OP020_120x170_ROWE.indd 691819245_OP020_120x170_ROWE.indd 6 15.10.20 15:0715.10.20 15:07
7
This toothbrush is a personal care device
and is not intended for use on multiple
patients in a dental practice or institution.
For hygienic reasons we recommend the
use of individual brush handles and brush
heads for each family member.
Small parts may come off, keep out of
reach of children.
To avoid brush head breakage which may
generate a small parts choking hazard or
damage teeth:
Prior to each use, ensure the brush head fits
well. Discontinue use of the toothbrush, if
brush head no longer fit properly. Never use
without a brush head.
If the toothbrush handle is dropped, the
brush head should be replaced before the
next use even if no damage is visible
Replace brush head every 3 months or
sooner if brush head becomes worn.
Clean brush head properly after each use
(see «Cleaning recommendations» para-
graph).
Proper cleaning ensures the safe
use and functional life of the toothbrush.
Important Information
This toothbrush, charger and pouch (acces-
sory) contain NdFeB magnets and generate
magnetic fields. If you use a medical device
or have an implanted medical device, con-
sult with the medical device manufacturer
or a physician, if you have questions about
safely using your Oral-B iO toothbrush.
Your Oral-B toothbrush can be used with
your smartphone (find details under
«Connecting your toothbrush to your
Smartphone
»). To avoid electromagnetic
interference and/or compatibility conflicts,
disable Bluetooth® on your toothbrush
handle (5) before using it in restricted sur-
roundings, such as aircrafts or specially
marked areas in hospitals.
Disable Bluetooth by entering the
«Set-
tings
» menu on the interactive display (4)
-> Bluetooth -> disable. Follow the same
procedure to enable Bluetooth again.
Persons with pacemakers should always
keep the toothbrush more than 15 centime-
ters (six inches) from the pacemaker while
turned on. Anytime you suspect inter-
ference is taking place disable Bluetooth.
Specifications
For voltage specifications refer to the bottom
of the charging unit.
First use
Please wake up your toothbrush by pressing
the on/off button (7) and follow the instruc-
tions on the interactive display (4) to get
started for first time setup.
If not further instructed on the display, you
may toggle with the mode button (8) and
select with the on/off button (7).
You may change the settings via the «Settings»
menu (17) at any time.
Charging and Operating
To charge the battery place the toothbrush
on the plugged-in charger (6).
The charge level is indicated on the inter-
active display (4). Once it is fully charged
the display turns off.
A full charge typically takes 3 hours.
If the battery is running low the motor
reduces its speed and the Smart Pressure
Sensor (3) shortly blinks in red. Once the
battery is empty, the motor stops; it will
need at least a 5-minute charge for one
usage.
Note: In case the battery is empty (display off),
charge for at least 30 minutes.
You can always store the handle on the
plugged-in charger to maintain it at full
charge; a battery overcharge is prevented
by the device.
Note: Store handle at room temperature for
optimal battery maintenance.
Caution: Do not expose handle to tempera-
tures higher than 50°C / 122°F.
Using your toothbrush
Start Brushing
Place the brush head on the handle. A small gap
should remain between handle and brush head.
Lift the handle off the plugged-in charger
or simply pick it up to wake up the handle
(display turns on). Wet brush head and apply
toothpaste. To avoid splashing, guide the
brush head to your teeth before switching the
handle on by pressing the on/off button.
Note: Display turns off after some time.
You may press the on/off button to activate
display again.
91819245_OP020_120x170_ROWE.indd 791819245_OP020_120x170_ROWE.indd 7 15.10.20 15:0715.10.20 15:07
8
Guide the brush head from tooth to tooth.
Brush the outsides, the insides and the chew-
ing surfaces. Brush all four quadrants of your
mouth equally. You may also consult your
dentist or dental hygienist about the right
technique for you.
After Brushing, the display gives you feedback
based on your brushing time.
In the first days of using any electric tooth-
brush, your gums may bleed slightly. In gen-
eral, bleeding should stop after a few days.
Should it persist after 2 weeks, please consult
your dentist or dental hygienist. If you have
sensitive teeth and/or gums, Oral-B recom-
mends using the
«Sensitive» or «Super Sensi-
tive
» modes (optional in combination with an
Oral-B
«Gentle Care» brush head (d)).
Timer
The timer signals with a short stuttering sound
at 30-seconds intervals to move to the next
quadrant of your mouth. A long stuttering
sound indicates the end of the professionally
recommended 2-minute brushing time.
The timer memorizes the elapsed brushing
time, even when the handle is briefly switched
off during brushing. The timer resets if
pausing longer than 30 seconds or placing
the handle on the plugged-in charger.
Note: During the use of the Oral-B App, the
timer may be deactivated for some features.
Note: You may also customize the timer set-
tings via Oral-B App.
Smart Pressure Sensor features (a)
Your toothbrush is equipped with a Smart
Pressure Sensor (3) that has various function-
alities indicated via different colours of light:
White (default) = Operating indicator (choose
individual colour via Oral-B App (b)) /
Low pressure indicator
Red = high pressure indicator / low battery
indicator
Green = recommended pressure indicator
Blue = Bluetooth pairing indicator
Orange = Error indicator (follow display
messages)
Brush with the right pressure indicated with a
green light. If too much pressure is applied, it
lights up in red reminding you to reduce pres-
sure. If the Smart Pressure Sensor illuminates
in white (or your pre-selected colour), we
recommend applying more pressure.
During high pressure the brush head move-
ment will be reduced (in
«Daily Clean»,
«Intense Clean» and «Sensitive» modes).
Periodically check the operation of the Smart
Pressure Sensor by pressing moderately on
the brush head during use.
Note: During the use of the Oral-B App, the
Smart Pressure Sensor feedback may be
inactive for some features.
Note: Smart Pressure Sensor is deactived
during
«Tongue Clean» mode.
Brushing modes (depending on model)
Your toothbrush offers different brushing
modes indicated on the display:
«Daily Clean» – Standard mode for daily
cleaning
«Sensitive» – Gentle, yet thorough cleaning
for sensitive areas
«Gum Care» – Gentle massage of gums
«Whitening» – Polishing for occasional or
everyday use
«Intense Clean» – For an extraordinary clean
feeling (operated with a higher speed)
«Super Sensitive» – Super gentle cleaning
for extra sensitive areas
«Tongue Clean» – Tongue cleaning for
occasional or everyday use
When operating the
«Tongue Clean» mode,
we recommend using a
«Gentle Care» brush
head (d). You can brush your tongue either
with or without toothpaste. Brush the whole
area of your tongue systematically in gentle
movements. The recommended brushing time
is 30 seconds; the motor stops after 30 seconds.
Mode setting:
You may first choose your default mode by
pressing the mode button (8) successively
once the handle is awake (display turned on).
Select a mode by pressing the on/off button
(7). Your toothbrush starts in the selected
default mode. You may also change modes
during brushing.
Note: You may also customize mode settings
via Oral-B App.
Interactive Display
Turn on the interactive display (4) by pressing
the on/off button (7). If not further instructed
91819245_OP020_120x170_ROWE.indd 891819245_OP020_120x170_ROWE.indd 8 15.10.20 15:0715.10.20 15:07
9
on the display, you may toggle with the mode
button and select with the on/off button.
(10-16)
«Mode selection» – toggle by pressing
the mode button and select default start mode
with on/off button.
(17)
«Settings» – toggle through all modes
until you reach the option
«Settings»;
to enter press the on/off button:
-> (19) manage Bluetooth settings (enable,
disable)
-> (20) select/change colour of Light Ring
-> (21) select/change language
-> (22) perform factory reset
(24)
«Timer» – displays brushing time.
(25)
«Battery status» – shows battery status
after use, when charging or when battery is low.
(26) «Exchange reminder» – reminds you
when to replace your brush head.
(27)
«Brush feedback »– brushing feedback
is indicated with a smiley face.
«Brush waking» when handle is picked up,
lifted off the plugged-in charger or when you
press the on/off button the handle indicates
its readiness.
«Error messages»«outside operating limits»:
you are operating or charging outside stand-
ard temperatures and/or above standard
battery current.
Brush heads
Oral-B offers you a variety of different Oral-B
iO brush heads (c/d) that only fit your Oral-B
iO toothbrush handle and can be used for
tooth-by-tooth precision cleaning.
Most iO Oral-B brush heads feature INDICATOR®
bristles to help you monitor brush head
replacement need.
With thorough brushing, twice a day for two
minutes, the colour will fade halfway approxi-
mately within 3 months, indicating the need to
exchange your brush head. If the bristles splay
before the colour recedes, you may exert too
much pressure on teeth and gums.
In general, we recommend replacing the brush
head every 3 months.
Connecting your toothbrush
to your Smartphone
The Oral-B App is available for smartphones
running iOS or Android™ operating systems.
It can be downloaded for free from App
Store
(SM)
/ Google Play™ or you may scan the
QR code on the back page of this manual (i).
Launch the Oral-B App. It will guide you
through the entire Bluetooth pairing
procedure. You may also find it under the
App´s settings (More -> Your brush).
Note: Oral-B App functionality is limited if
Bluetooth is deactivated on your smartphone
(for directions please refer to your smart-
phone’s user manual).
Pairing is indicated via the Smart Pressure
Sensor light. Any App instructions will be
displayed on your smartphone.
You may change Bluetooth settings at
any time on your handle via the display
-> Settings -> Bluetooth enable/disable.
Keep your smartphone in close proximity
(within 5m distance) when using it with the
handle. Make sure the smartphone is safely
positioned in a dry place.
Note: Your smartphone must support
Bluetooth 4.2 (or higher)/Bluetooth Smart
in order to pair your handle.
Check app.oralb.com for compatible
smartphones and country availability
of the Oral-B App.
Caution: Follow your smartphone’s user man-
ual to ensure your phone/charger is designed
for use in a bathroom environment.
Cleaning recommendations
After brushing, rinse your brush head under
running water with the handle switched on.
Remove the brush head and clean the handle
and brush head separately. Make sure water
runs inside the top of the handle as well as
inside the brush head. Wipe all parts dry and
let them air-dry before reassembling your
toothbrush again.
Unplug the charger before cleaning.
Clean the charger regularly with a damp cloth.
Please check individual cleaning instructions
for each accessory in its
«Accessories»
paragraph.
91819245_OP020_120x170_ROWE.indd 991819245_OP020_120x170_ROWE.indd 9 15.10.20 15:0715.10.20 15:07
10
Accessories
(depending on model)
Charging Travel Case (h)
To charge your handle (5) place it in the
charging travel case (h) and connect it to
an electric outlet, using the extra power
supply (h2) provided. The power supply
may be used for all global mains voltage
ranges (100 – 240V).
The flashing light (h1) of the charging travel
case indicates that the handle is charging.
Once the handle is fully charged the light
turns off. A full charge typically takes
6 hours.
The outer and inner case should be cleaned
with a damp cloth only. Make sure that the
handle and brush head are completely dry
before storing in the travel case.
Note: Clean stains on travel case surface
immediately. Store travel case in a clean and
dry place.
Travel Case (g)
Store the clean and dry toothbrush/brush
heads in the travel case (g).
The outer and inner case should be cleaned
with a damp cloth only.
Note: Clean stains on travel case surface
immediately. Store travel case in a clean and
dry place.
Brush head holder stand (f) / Brush head
holder with cap (e)
You may store your cleaned brush heads on
the pins of the brush head holders. Make sure
brush heads are dried before placing them in
the holder and/or closing the cap. Brush head
holders and cap are dishwasher-safe.
Zipper Pouch / Magnetic Pouch
Store the clean and dry toothbrush/brush
heads in the zipper pouch.
The outer and inner case can be cleaned
under running water.
Store the clean and dry toothbrush along with
the brush head holder (e) in the magnetic
pouch. Make sure brush heads are dried
before placing them into the holder and/or
closing the cap. The outer and inner surfaces
can be cleaned under running water. Store
pouches in a clean and dry place.
Note: Clean stains on pouch surfaces immedi-
ately.
Subject to change without notice.
Environmental Notice
Product contains batteries and/or
recyclable electric waste. For envi-
ronment protection do not dis-
pose in household waste, but for recycling
take to electric waste collection points
provided in your country.
Guarantee
We grant 2 years guarantee on the product
commencing on the date of purchase.
Within the guarantee period we will eliminate,
free of charge, any defects in the appliance
resulting from faults in materials or workman-
ship, either by repairing or replacing the com-
plete appliance as we may choose. Depending
on availability replacement of a unit might
re-
sult in a different colour or an equivalent model.
This guarantee extends to every country
where this appliance is supplied by Braun/
Oral-B or its appointed distributor. This guar-
antee does not cover: damage due to
improper use, normal wear or use, especially
regarding the brush heads, as well as defects
that have a negligible effect on the value or
operation of the appliance.
The guarantee becomes void if repairs are
undertaken by unauthorized persons and if
original Braun/Oral-B parts are not used.
This appliance is equipped with a Bluetooth
Smart approved radio interface. Failure to
establish a Bluetooth Smart connection to
specific smartphones is not covered under the
device guarantee, unless the malfunction of
the Bluetooth interface is referable to Oral-B.
The Bluetooth devices are warranted by their
own manufacturers and not by Oral-B. Oral-B
does not influence or make any recommenda-
tions to device manufacturers, and therefore
Oral-B does not assume any responsibility for
the number of compatible devices with our
Bluetooth interface.
Oral-B reserves the right, without any prior
notice, to make any technical modifications or
changes to system implementation of device
features, interface, and menu structure
changes that are deemed necessary to ensure
that Oral-B systems function reliably.
91819245_OP020_120x170_ROWE.indd 1091819245_OP020_120x170_ROWE.indd 10 15.10.20 15:0715.10.20 15:07
11
To obtain service within the guarantee period,
hand in or send the complete appliance with
your sales receipt to an authorized Oral-B
Braun Customer Service Centre.
Information
Bluetooth
®
radio module
Although all indicated functions on the Blue-
tooth device are supported, Oral-B does not
ensure 100% reliability in connection, and fea-
ture operation consistency.
Operation performance and connection relia-
bility are direct consequences of each individ-
ual Bluetooth device, software version, as well
as the operating system of those Bluetooth
devices and company security regulations
implemented on the device.
Oral-B adheres to and strictly implements the
Bluetooth standard by which Bluetooth
devices can communicate and function in
Oral-B toothbrushes.
However, if device manufacturers fail to imple-
ment this standard, Bluetooth compatibility
and features will be further compromised and
the user may experience functional and fea-
ture-related issues. Please note that the soft-
ware on the Bluetooth device can significantly
affect compatibility and operation.
Warranty – Exclusions and Limitations
This limited warranty applies only to the new
products manufactured by or for The Procter
& Gamble Company, its Affiliates or Subsidiar-
ies (
«P&G») that can be identified by the
Braun / Oral-B trademark, trade name, or logo
affixed thereto. This limited warranty does not
apply to any non-P&G product including hard-
ware and software. P&G is not liable for any
damage to or loss of any programs, data, or
other information stored on any media con-
tained within the product, or any non-P&G
product or part not covered by this limited
warranty. Recovery or reinstallation of
programs, data or other information is not
covered under this limited warranty.
This limited warranty does not apply to (i)
damage caused by accident, abuse, misuse,
neglect, misapplication, or non-P&G product;
(ii) damage caused by service performed by
anyone other than Braun or authorized Braun
service location; (iii) a product or part that has
been modified without the written permission
of P&G, and (iv) damage arising out of the use
of or inability to use the Oral-B Smartphone
stand/puck, Smartphone mirror holder, or
charging travel case (
«Accessories»).
LIMITATION OF LIABILITY
TO THE EXTENT PERMITTED BY APPLICA-
BLE LAW, IN NO EVENT SHALL P&G ITS DIS-
TRIBUTORS OR SUPPLIERS BE LIABLE TO
YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, CONSE-
QUENTIAL, SPECIAL, EXEMPLARY OR PUNI-
TIVE DAMAGES, OF ANY NATURE WHATSO-
EVER, ARISING OUT OF THE USE OF OR
INABILITY TO USE THE ORAL-B ACCESSO-
RIES, INCLUDING, WITHOUT LIMITATION,
INJURY TO PERSONS, PROPERTY DAMAGE,
LOSS OF VALUE OF ANY THIRD PARTY
PRODUCTS THAT ARE USED IN OR WITH
THE ORAL-B ACCESSORIES, OR LOSS OF
USE OF THE ORAL-B ACCESSORIES OR ANY
THIRD PARTY PRODUCTS THAT ARE USED
IN OR WITH THE ORAL-B ACCESSORIES,
EVEN IF P&G HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. WITHOUT
LIMITING THE FOREGOING, YOU UNDER-
STAND AND AGREE THAT P&G HAS NO LIA-
BILITY FOR ANY DAMAGE OR DESTRUCTION
TO CONSUMER ELECTRONICS DEVICES OR
OTHER PERSONAL PROPERTY THAT ARE
CONTAINED ON OR EXTERIOR TO THE
ORAL-B ACCESSORIES, OR ANY LOSS OF
DATA CONTAINED IN THE FOREGOING
DEVICES. IN NO EVENT SHALL ANY RECOV-
ERY AGAINST ORAL-B EXCEED THE ACTUAL
PRICE PAID FOR THE PURCHASE OF THE
PRODUCT.
Warranty replacement brush heads
Oral-B warranty will be voided if electric
rechargeable handle damage is found to be
attributed to the use of non-Oral-B replace-
ment brush heads.
Oral-B does not recommend the use of non-
Oral-B replacement brush heads.
Oral-B has no control over the quality of
non-Oral-B replacement brush heads.
Therefore, we cannot ensure the cleaning
performance of non-Oral-B replacement
brush heads, as communicated with the
electric rechargeable handle at time of ini-
tial purchase.
Oral-B cannot ensure a good fit of non-
Oral-B replacement brush heads.
Oral-B cannot predict the long-term effect
of non-Oral-B replacement brush heads on
handle wear.
91819245_OP020_120x170_ROWE.indd 1191819245_OP020_120x170_ROWE.indd 11 15.10.20 15:0715.10.20 15:07
12
All Oral-B replacement brush heads carry the
Oral-B logo and meet Oral-B’s high quality
standards. Oral-B does not sell replacement
brush heads or handle parts under any other
brand name.
Trouble Shooting
Problem Possible reason Remedy
APP
Handle does
not operate
(properly) with
Oral-B App.
1. Oral-B App is closed.
2. Bluetooth is not activated on
smartphone.
3. Bluetooth is disabled on handle.
4. Bluetooth connection to smart-
phone has been lost.
5. Your smartphone does not sup-
port Bluetooth 4.2 (or higher)/
Bluetooth Smart.
6. Outdated Oral-B App.
1. Launch Oral-B App.
2. Activate Bluetooth on smartphone
(described in its user manual).
3. Enable Bluetooth via display
Settings -> Bluetooth enable.
4. Pair handle and smartphone again
via App settings. Keep your
smartphone in close proximity
when using it with handle.
5. Your smartphone must support
Bluetooth 4.2 (or higher)/
Bluetooth Smart in order to pair
handle.
Check app.oralb.com for compatible
smartphones and
country availabi-
lity of the Oral-B App.
6. Download latest Oral-B App.
Reset to factory
settings.
Original functionality wanted. Enter via display Settings -> Factory
Reset (22). Press on/off button to
confirm.
TOOTHBRUSH
Handle is not
operating
(during first use).
1. Battery has a very low charge
level; handle does not operate.
2. Operating outside standard
temperature (message on
display and/or alternating lights
of Smart Pressure Sensor)
1. Charge at least for 30 min.
2. Always operate in standard
operating temperatures
(> 0°C and < 40°C).
Short stuttering
sounds after
2 minutes or
handle does not
operate any
timer.
Timer has been modified/deacti-
vated via App.
Use App to change timer settings or
perform factory reset
(see App Trouble Shootings).
91819245_OP020_120x170_ROWE.indd 1291819245_OP020_120x170_ROWE.indd 12 15.10.20 15:0715.10.20 15:07
13
Handle does
not charge.
1. Battery is at a very low charger
level (0%); it may take up to
10-15min until display turns on.
2. Ambient temperature for
charging is out of valid range
(< 0°C and > 40°C).
3. Charger may not be (properly)
connected.
1. Charge at least for 30min.
2. Recommended ambient tempera-
ture for charging is 5°C to 35°C.
3. Ensure charger is connected to
mains voltage.
Rattling/loud
noise during
brushing or
turning on.
1. Brush head may not be placed
correctly onto the brush handle.
2. Brush head may be worn.
1. Check proper fit of brush head
on handle. Small gap remains in
between.
2. Replace brush head.
The rechargeable toothbrush contains a radio
module which operates in the 2.4 to 2.48 GHz
band with a maximum power of 1mW.
Hereby, Braun GmbH declares that the radio
equipment types 3758, 3771, 3765, 3754, 3764,
3762 and 3767 are in compliance with Directive
2014/53/EU. The full text of the EU declaration
of conformity is available at the following
internet address: www.oralb.com/ce.
91819245_OP020_120x170_ROWE.indd 1391819245_OP020_120x170_ROWE.indd 13 15.10.20 15:0715.10.20 15:07
14
Beschreibung
1 Aufsteckbürste
2 Bürstenkopf-Erkennungssymbol
3 Intelligente Andruckkontrolle (Licht Ring)
4 Interaktives Display
5 Handstück
6 Ladestation
7 Ein-/Ausschalter
8 Modusauswahl
9 Interaktive Anzeigefunktionen
10
Reinigungsmodus «Tägliche Reinigung»
11 Reinigungsmodus «Sensitiv»
12 Reinigungsmodus «Zahnfleischschutz»
13 Reinigungsmodus «Aufhellen»
14
Reinigungsmodus «Intensive Reinigung»
15 Reinigungsmodus «Super Sensitiv»
16 Reinigungsmodus «Zungenreinigung»
17 Einstellungsmenü
18 Funktionen des Einstellungsmenüs
19
Verwalten der
Bluetooth®
-Einstellungen
20 Farbe des Licht Rings auswählen/ändern
21 Sprache auswählen/ändern
22 Zurücksetzung auf Werkseinstellungen
23 Feedback-Funktionen
24 Timer
25 Batteriestatus
26 Erinnerung zum Bürstenkopfwechsel
27 Zahnputz-Feedback
Zubehör und Funktionen:
a Funktionen der Intelligenten
Andruckkontrolle
b Farbe des Licht Rings über die
Oral-B App anpassen
c Aufsteckbürste «Ultimative Reinigung»
d Aufsteckbürste «Sanfte Reinigung»
e Mini-Etui für Aufsteckbürsten
f Halterung für Aufsteckbürsten
g Reise-Etui
h «POWER2GO» Lade-Reise-Etui
h1 Ladekontrollleuchte
h2 Smart Plug (Stromanschluss)
i Oral-B App herunterladen und
Bluetooth®-Verbindung herstellen
(siehe Rückseite)
Hinweis: Inhalt kann je nach
gekauftem Modell variieren.
91819245_OP020_120x170_ROWE.indd 1491819245_OP020_120x170_ROWE.indd 14 15.10.20 15:0715.10.20 15:07
15
Deutsch
Willkommen bei Oral-B!
Bevor Sie diese Zahnbürste verwenden, lesen
Sie bitte diese Anweisungen und bewahren Sie
die Gebrauchsanweisung für eine spätere Ver-
wendung auf.
WICHTIG
Überprüfen Sie regelmäßig
das gesamte Produkt/Kabel/
Zubehör auf Schäden.
Beschädigte oder nicht funk-
tionstüchtige Geräte dürfen
nicht mehr benutzt werden.
Falls das Produkt/Kabel/
Zubehör beschädigt ist, brin-
gen Sie es zu einem
Oral-B-Servicecenter. Neh-
men Sie keine Veränderun-
gen an dem Produkt vor und
reparieren Sie es nicht. Dies
kann zu Feuer, Stromschlag
oder Verletzungen führen.
Stecken Sie niemals Gegen-
stände in Öffnungen am
Gerät.
Benutzung durch Kinder
unter 3 Jahren ist nicht emp-
fohlen. Personen mit einge-
schränkten physischen, sen-
sorischen oder geistigen
Fähigkeiten oder fehlender
Erfahrung bzw. fehlendem
Wissen sowie Kinder können
die Zahnbürsten dann benut-
zen, wenn sie beaufsichtigt
werden oder Anweisungen
zum sicheren Gebrauch des
Geräts erhalten haben und
die vorhandenen Gefahren
kennen.
Reinigung und Wartung
dürfen nicht von Kindern
durchgeführt werden.
Kinder dürfen nicht mit dem
Gerät spielen.
Nutzen Sie dieses Produkt
nur wie in der Gebrauchsan-
weisung beschrieben. Nutzen
Sie kein Zubehör, das nicht
vom Hersteller empfohlen ist.
Verwenden Sie nur die mit
Ihrem Gerät gelieferte
Ladestation.
Verwenden Sie die Ladesta-
tion und/oder das Spezialka-
belset (Smart Plug) mit
einem integrierten Netzteil
mit Sicherheitskleinspan-
nung, das im Lieferumfang
enthalten ist. Es dürfen
weder Teile ausgetauscht
noch Veränderungen vorge-
nommen werden, da sonst
Stromschlaggefahr besteht.
Wenn die Ladestation bzw.
das
«POWER2GO» Lade-
Reise-Etui die Nummerie-
rung
492
492-xxxx trägt,
benutzen Sie nur das mit
Ihrem Gerät mitgelieferte
Braun/Oral-B Spezialkabelset
(Smart Plug).
91819245_OP020_120x170_ROWE.indd 1591819245_OP020_120x170_ROWE.indd 15 15.10.20 15:0715.10.20 15:07
16
ACHTUNG
Die Ladestation, den Smart Plug oder das
«POWER2GO» Lade-Reise-Etui nicht in
Wasser oder Flüssigkeiten legen oder dort
aufbewahren, wo sie in eine Wanne oder ein
Waschbecken fallen oder gezogen werden
können. Fassen Sie das Gerät nicht an,
wenn es ins Wasser gefallen ist. Ziehen Sie
sofort den Stecker.
Vermeiden Sie starkes Biegen, Einklemmen
und Quetschen des Kabels.
Dieses Gerät enthält einen Akku, der vom
Benutzer nicht ausgetauscht werden kann.
Das Gerät darf nicht geöffnet und demon-
tiert werden. Den Akku entsorgen Sie bitte
mit dem ganzen Gerät bei einer kommuna-
len Recycling- bzw. Altgerätesammelstelle.
Ein unautorisiertes Öffnen des Handstücks
würde das Gerät zerstören und die Garantie
außer Kraft setzen.
Beim Herausziehen des Steckers aus der
Steckdose immer am Stecker ziehen, nicht
am Kabel. Berühren Sie den Stecker nicht
mit nassen Händen. Dies kann zu einem
elektrischen Schlag führen.
Bitte wenden Sie sich vor der Verwendung
der Zahnbürste an Ihren Zahnarzt, falls Sie
sich in zahnmedizinischer Behandlung
befinden.
Diese Zahnbürste ist ein Gerät zur
individuellen Mundpflege und nicht
geeignet für die Verwendung durch
mehrere Patienten in einer Zahnarztpraxis
oder anderen ähnlichen Einrichtungen. Aus
hygienischen Gründen empfehlen wir, für
jedes Familienmitglied eigene Handstücke
und Aufsteckbürsten zu verwenden.
Außer Reichweite von Kindern
aufbewahren, da sich Kleinteile ablösen
könnten.
Um einem Bruch der Aufsteckbürste vorzu-
beugen, was dazu führen könnte, dass Klein-
teile verschluckt oder die Zähne beschädigt
werden, beachten Sie bitte Folgendes:
Stellen Sie vor jeder Verwendung sicher,
dass die Aufsteckbürste korrekt aufgesetzt
wurde. Verwenden Sie die Zahnbürste nicht
weiter, wenn die Aufsteckbürste nicht mehr
richtig passt. Verwenden Sie die Zahnbürste
nie ohne Aufsteckbürste.
Falls die Zahnbürste heruntergefallen ist,
wechseln Sie die Aufsteckbürste vor der
nächsten Verwendung, auch wenn kein
sichtbarer Schaden entstanden ist.
Die Aufsteckbürste alle 3 Monate wechseln
oder früher, wenn der Bürstenkopf
abgenutzt ist.
Reinigen Sie die Aufsteckbürste nach jeder
Verwendung gründlich (siehe Abschnitt
«Reinigungsempfehlungen»). Eine
gründliche Reinigung stellt die sichere
Nutzung und Funktionalität der Zahnbürste
sicher.
Wichtige Informationen
Die Zahnbürste, die Ladestation und die
Aufbewahrungstasche (Zubehör) enthalten
NdFeB-Magnete und erzeugen Magnetfel-
der. Wenn Sie ein Medizinprodukt verwen-
den oder ein Medizinprodukt implantiert
haben, wenden Sie sich bitte an den Her-
steller des Medizinprodukts oder einen
Arzt, wenn Sie Fragen zur sicheren Verwen-
dung Ihrer Oral-B iO Zahnbürste haben.
Ihre Oral-B Zahnbürste kann mit Ihrem
Smartphone verwendet werden (weitere
Informationen finden Sie im Abschnitt
«Ihre
Zahnbürste mit Ihrem Smartphone verbin-
den
»). Um elektromagnetische Störungen
und/oder Kompatibilitätskonflikte zu ver-
meiden, schalten Sie Bluetooth® am Hand-
stück der Zahnbürste (5) vor der Verwen-
dung in Umgebungen mit Einschränkungen,
wie z. B. in Flugzeugen oder in bestimmten
Bereichen in Krankenhäusern, aus.
Deaktivieren Sie Bluetooth, indem Sie das
Menü
«Einstellungen» auf dem interaktiven
Display (4) aufrufen und -> Bluetooth ->
deaktivieren. Verfahren Sie genauso, um
Bluetooth wieder zu aktivieren.
Personen, die einen Herzschrittmacher tra-
gen, sollten die Zahnbürste im eingeschal-
teten Zustand stets mehr als 15 Zentimeter
vom Herzschrittmacher entfernt halten.
Wenn Sie vermuten, dass Störungen auftre-
ten, schalten Sie Bluetooth aus.
Spezifikationen
Spannungsspezifikationen finden Sie auf der
Unterseite der Ladestation.
Erste Verwendung
Bitte schalten Sie Ihre Zahnbürste ein, indem
Sie den Ein-/Ausschalter (7) drücken und die
Anweisungen auf dem interaktiven Display (4)
befolgen, um die erste Einrichtung zu starten.
Wenn Sie keine weiteren Anweisungen auf
91819245_OP020_120x170_ROWE.indd 1691819245_OP020_120x170_ROWE.indd 16 15.10.20 15:0715.10.20 15:07
17
dem Display erhalten, können Sie mit der
Modustaste (8) zwischen den Modi wechseln
und mit dem Ein-/Ausschalter (7) auswählen.
Sie können die Einstellungen jederzeit über
das Menü
«Einstellungen» (17) ändern.
Aufladen und
Inbetriebnahme
Zum Aufladen des Akkus die Zahnbürste
auf der angeschlossenen Ladestation (6)
platzieren.
Das interaktive Display (4) zeigt den
Ladestand an. Sobald der Akku vollständig
geladen ist, schaltet sich das Display aus.
Eine Vollladung kann bis zu 3 Stunden
dauern.
Wenn der Akku schwach wird, verringert
der Motor seine Geschwindigkeit und die
intelligente Andruckkontrolle (3) blinkt
kurz
rot auf. Sobald der Akku leer ist, stoppt
der Motor. Der Akku muss mindestens
5 Minuten laden, bevor Sie Ihre Zahnbürste
für einen weiteren Putzvorgang benutzen
können.
Hinweis: Wenn die Batterie leer ist (Display
aus), laden Sie die Zahnbürste mindestens
30 Minuten.
Das Handstück kann immer auf der
angeschlossenen Ladestation stehen, damit
es jederzeit voll geladen ist. Eine
Überladung ist nicht möglich.
Hinweis: Für eine optimale Akkuleistung be-
wahren Sie das Gerät bei Raumtemperatur auf.
Warnung: Das Handstück nicht Temperaturen
über 50°C aussetzen.
Die Verwendung Ihrer
Zahnbürste
Mit dem Zähneputzen beginnen
Stecken Sie die Aufsteckbürste auf das Hand-
stück. Ein kleiner Spalt sollte zwischen dem
Handstück und der Aufsteckbürste verbleiben.
Heben Sie das Handstück von der angeschlos-
senen Ladestation ab oder nehmen Sie es ein-
fach in die Hand, um das Display einzuschal-
ten. Tragen Sie Zahnpasta auf den ange-
feuchteten Bürstenkopf auf. Um Spritzer zu
vermeiden, führen Sie den Bürstenkopf an
Ihre Zähne, bevor Sie das Handstück mit dem
Ein-/Ausschalter einschalten.
Hinweis: Das Display geht nach einiger Zeit
aus. Sie können den Ein-/Ausschalter drücken,
um das Display erneut zu aktivieren.
Bewegen Sie den Bürstenkopf von Zahn zu
Zahn. Putzen Sie die Außenflächen, die Innen-
flächen und die Kauflächen. Reinigen Sie jeden
der vier Kieferquadranten gleichmäßig. Sie
können auch Ihren Zahnarzt oder Dental-
hygieniker zur richtigen Technik für Sie fragen.
Nach dem Zähneputzen gibt Ihnen das Display
Feedback auf Basis Ihrer Putzzeit.
Während Ihren ersten Anwendungen einer
elektrischen Zahnbürste kann es sein, dass Ihr
Zahnfleisch leicht blutet. Dies sollte nach
wenigen Tagen nicht mehr vorkommen. Soll-
ten Sie auch noch nach 2 Wochen Probleme
haben, kontaktieren Sie bitte Ihren Zahnarzt
oder Dentalhygieniker. Bei sensiblen Zähnen
bzw. empfindlichem Zahnfleisch empfiehlt
Ihnen Oral-B, den Reinigungsmodus
«Sensitiv»
oder
«Super Sensitiv» zu verwenden (optional
in Kombination mit einem Oral-B «Sanfte
Reinigung
»
Bürstenkopf (d)).
Timer
Der Timer zeigt mit einem kurzen stotternden
Geräusch im Abstand von 30 Sekunden an,
wann Sie zum nächsten Mundbereich wech-
seln sollten. Ein langes stotterndes Geräusch
signalisiert das Ende der von Zahnärzten emp-
fohlenen zweiminütigen Putzzeit.
Der Timer speichert die verstrichene Putzzeit,
auch wenn das Handstück beim Putzen kurz
ausgeschaltet wird. Der Timer wird zurückge-
setzt, wenn die Unterbrechung länger als 30
Sekunden andauert, oder Sie das Handstück
auf die angeschlossene Ladestation stellen.
Hinweis: Während des Gebrauchs der Oral-B
App kann der Timer für einige Funktionen aus-
geschaltet sein.
Hinweis: Sie können die Timereinstellungen
auch über die Oral-B App anpassen.
Funktionen der Intelligenten Andruck-
kontrolle (a)
Ihre Zahnbürste ist mit einer intelligenten
Andruckkontrolle (3) ausgestattet, die über
mehrere Funktionen verfügt, die mit verschie-
denen Lichtfarben gekennzeichnet werden:
Weiß (Standardeinstellung) = Betriebsanzeige
(wählen Sie eine beliebige Farbe über die
Oral-B App (b)) / Anzeige bei zu wenig Druck
91819245_OP020_120x170_ROWE.indd 1791819245_OP020_120x170_ROWE.indd 17 15.10.20 15:0715.10.20 15:07
18
Rot = Anzeige bei zu viel Druck/ Anzeige für
schwachen Akku
Grün = Anzeige für empfohlenen Druck
Blau = Bluetooth-Verbindungs-Anzeige
Orange = Fehleranzeige (Displaymeldungen
befolgen)
Putzen Sie mit dem richtigen Druck, der mit
einem grünen Licht angezeigt wird. Wenn zu
viel Druck ausgeübt wird, leuchtet sie rot und
erinnert Sie daran, den Druck zu reduzieren.
Wenn die intelligente Andruckkontrolle weiß
leuchtet (oder in Ihrer ausgewählten Farbe),
empfehlen wir, mehr Druck auszuüben.
Bei hohem Druck wird die Bürstenkopfbewe-
gung reduziert (in den Modi
«Tägliche Reini-
gung
», «Intensive Reinigung» und «Sensitiv»).
Überprüfen Sie von Zeit zu Zeit die Funktion
der Intelligenten Andruckkontrolle, indem Sie
im eingeschalteten Zustand der Zahnbürste
leicht gegen den Bürstenkopf drücken.
Anmerkung: Während des Gebrauchs der
Oral-B App kann die Intelligente Andruckkont-
rolle für einige Funktionen ausgeschaltet sein.
Anmerkung: Im Modus
«Zungenreinigung» ist
die Intelligente Andruckkontrolle deaktiviert.
Reinigungsmodi (modellabhängig)
Ihre Zahnbürste bietet verschiedene Reini-
gungsmodi, die auf dem Display angezeigt
werden:
«Tägliche Reinigung» – Standard-
Reinigungsmodus für die tägliche Reinigung
«Sensitiv» – Sanfte und gründliche Reinigung
für empfindliche Bereiche
«Zahnfleischschutz» – Sanfte Massage des
Zahnfleischs
«Aufhellen»
Aufhellende Reinigung für den
gelegentlichen oder täglichen Gebrauch
«Intensive Reinigung» – Reinigung für ein
besonders sauberes Mundgefühl (höhere
Geschwindigkeit)
«Super Sensitiv» – Besonders sanfte Reini-
gung für besonders empfindliche Bereiche
«Zungenreinigung» – Zungenreinigung für
gelegentliche oder tägliche Verwendung
Wenn Sie den Modus «Zungenreinigung»
verwenden, empfehlen wir eine
«Sanfte
Reinigung
»-Aufsteckbürste. Sie können Ihre
Zunge entweder mit oder ohne Zahnpasta
reinigen. Reinigen Sie den gesamten Bereich
Ihrer Zunge systematisch in sanften Bewegun-
gen. Die empfohlene Putzzeit beträgt 30 Sekun-
den; der Motor stoppt nach 30 Sekunden.
Moduseinstellung:
Sie können zunächst den Standardmodus aus-
wählen, indem Sie die Modustaste (8) drücken,
sobald das Display leuchtet. Wählen Sie einen
Modus aus, indem Sie den Ein-/Ausschalter (7)
drücken. Ihre Zahnbürste beginnt im ausge-
wählten Standardmodus. Während des Zähne-
putzens können Sie auch die Modi ändern.
Hinweis: Sie können die Moduseinstellungen
auch über die Oral-B App anpassen.
Interaktives Display
Schalten Sie das interaktive Display (4) ein,
indem Sie den Ein-/Ausschalter (7) drücken.
Wenn Sie keine weiteren Anweisungen auf
dem Display erhalten, können Sie mit der
Modustaste wechseln und mit dem Ein-/Aus-
schalter auswählen.
(10-16)
«Modusauswahl» – Wechseln Sie durch
Drücken der Modustaste und wählen Sie mit
dem Ein-/Ausschalter Ihren bevorzugten Start-
modus aus.
(17)
«Einstellungen» – Schalten Sie durch alle
Modi, bis Sie die Option
«Einstellungen» errei-
chen. Mit dem Ein-/Ausschalter können Sie die
Einstellungen verwalten:
-> (19) Bluetooth-Einstellungen verwalten
(aktivieren/deaktivieren)
-> (20) Farbe des Licht Rings auswählen/
ändern
-> (21) Sprache auswählen/ändern
-> (22) Zurücksetzung auf Werkseinstellungen
(24)
«Timer» – zeigt die Putzzeit an.
(25)
«Akkustand» – Anzeige des Akkustands
nach der Verwendung, während der Auf-
ladung oder wenn der Akku leer ist.
(26)
«Erinnerung an Bürstenkopfwechsel»
erinnert Sie daran, Ihre Aufsteckbürste aus-
zutauschen.
(27) Das
«Zahnputz-Feedback» wird mit
einem Smiley-Gesicht angezeigt.
Die Zahnbürste
«erwacht» – wenn das Hand-
stück in die Hand genommen oder aus der
Ladestation gehoben wird. Wenn Sie den Ein/
Ausschalter drücken, zeigt das Handstück
seine Bereitschaft an.
91819245_OP020_120x170_ROWE.indd 1891819245_OP020_120x170_ROWE.indd 18 15.10.20 15:0715.10.20 15:07
19
«Fehlermeldungen»«außerhalb der
Betriebsgrenzen
»: Sie betreiben oder laden
das Gerät außerhalb der Standardtemperaturen
und/oder über dem Standard-Batteriestrom.
Aufsteckbürsten
Oral-B bietet Ihnen verschiedene Oral-B iO
Aufsteckbürsten (c/d), die nur auf Ihre Oral-B
iO Zahnbürste passen und für eine zahngenaue
Präzisionsreinigung entwickelt wurden.
Die meisten Oral-B iO Aufsteckbürsten verfü-
gen über INDICATOR®-Borsten, die Ihnen
anzeigen, wann der Bürstenkopf gewechselt
werden sollte. Bei gründlichem Putzen, zwei-
mal täglich für zwei Minuten, verblasst die
Farbe nach etwa 3 Monaten zur Hälfte und
zeigt damit an, dass der Bürstenkopf gewech-
selt werden sollte. Falls die Borsten bereits
abgenutzt sind, bevor die Farbe verblasst,
üben Sie ggf. zu viel Druck auf Ihre Zähne und
Ihr Zahnfleisch aus. Grundsätzlich empfehlen
wir, den Bürstenkopf alle 3 Monate zu wechseln.
Ihre Zahnbürste mit Ihrem
Smartphone verbinden
Die Oral-B App steht für iOS und Android™-
Smartphones zur Verfügung. Sie kann kosten-
los vom App Store
(SM)
/ Google Play™ herunter-
geladen werden, oder Sie können den QR-Code
auf der Rückseite dieser Gebrauchsanweisung
(i) scannen.
Starten Sie die Oral-B App. Folgen Sie dann
den Anweisungen, um eine Verbindung
über Bluetooth herzustellen. Sie finden die
Anweisungen auch in den App-Einstellungen
(Mehr -> Ihre Zahnbürste).
Hinweis: Die Funktionen der Oral-B App sind
eingeschränkt, wenn Bluetooth auf Ihrem
Smartphone ausgeschaltet ist (Weitere Infor-
mationen hierzu finden Sie im Benutzerhand-
buch Ihres Smartphones).
Die Kopplung wird über das Licht der
intelligenten Andruckkontrolle angezeigt.
Weitere Anweisungen zur App werden auf
dem Display Ihres Smartphones angezeigt.
Sie können die Bluetooth-Einstellungen
jederzeit an Ihrem Handstück über das
Display -> Einstellungen -> Bluetooth
aktivieren/deaktivieren ändern.
Halten Sie Ihr Smartphone in Ihrer Nähe
(innerhalb von 5m), wenn Sie es mit dem
Handstück Ihrer Zahnbürste verwenden.
Stellen Sie sicher, dass Sie Ihr Smartphone
immer an einen sicheren und trockenen Ort
legen.
Hinweis: Ihr Smartphone muss Bluetooth 4.2
(oder eine höhere Version)/Bluetooth Smart
unterstützen, um sich mit dem Handstück
Ihrer Zahnbürste verbinden zu können. Unter
app.oralb.com können Sie die kompatiblen
Smartphones und die Länderverfügbarkeit der
Oral-B App einsehen.
Warnung: Überprüfen Sie im Benutzerhand-
buch Ihres Smartphones, ob Ihr Smartphone/
Ladegerät für die Verwendung in Badezimmern
geeignet ist.
Reinigungsempfehlungen
Spülen Sie die Aufsteckbürste nach jedem
Gebrauch bei eingeschaltetem Handstück
gründlich unter fließendem Wasser ab. Entfer-
nen Sie den Bürstenkopf und reinigen Sie
Handstück und Bürstenkopf separat. Stellen
Sie sicher, dass Wasser sowohl im oberen Teil
des Handstücks als auch im Bürstenkopf fließt.
Wischen Sie alle Teile trocken und lassen Sie
sie lufttrocknen, bevor Sie Ihre Zahnbürste
wieder zusammenbauen.
Ziehen Sie vor der Reinigung den Stecker aus
der Steckdose. Reinigen Sie die Ladestation
regelmäßig mit einem feuchten Tuch.
Bitte überprüfen Sie die einzelnen Reinigungs-
anweisungen für jedes Zubehör im Abschnitt
«Zubehör».
Zubehör
(modellabhängig)
«POWER2GO» Lade-Reise-Etui (h)
Um Ihr Handstück (5) zu laden, platzieren
Sie es im «POWER2GO» Lade-Reise-Etui (h)
91819245_OP020_120x170_ROWE.indd 1991819245_OP020_120x170_ROWE.indd 19 15.10.20 15:0715.10.20 15:07
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110