ONKYO TX-L50 Bruksanvisning

English

Français

Español

Italiano Deutsch Nederlands

Language select / Sélection de la langue / Selección de idioma / Selezione lingua / Sprachauswahl / Taal selecteren / Välj språk

TX-L50

Svenska

E

N

Before Start

What's in the box .................................................................... 2

Part Names

Front Panel ............................................................................. 3

Rear Panel .............................................................................. 4

Remote Controller .................................................................. 5

Display .................................................................................... 6

Install

1. Connect the Speakers ........................................................ 7

2. Connect the TV ................................................................. 10

3. Connect the HDMI AV Components ..................................11

4. Connect the Audio Components ....................................... 12

5. Connect Other Cables ...................................................... 13

Initial Setup

Initial Setup with Auto Start-up Wizard ................................. 14

Playback

AV Component Playback ...................................................... 17

Internet Radio ....................................................................... 18

Spotify ................................................................................... 19

Music Server ......................................................................... 20

USB Storage Device ............................................................. 22

AirPlay

®

................................................................................ 24

BLUETOOTH

®

Playback ......................................................25

Listening to the FM Radio ..................................................... 26

Listening Modes ................................................................... 28

Quick Menu .......................................................................... 46

Other Functions .................................................................... 48

Advanced Setup

Setup Menu ........................................................................... 49

Firmware Update

Firmware Update .................................................................. 62

Others

Troubleshooting .................................................................... 65

General Specifications .......................................................... 70

About HDMI .......................................................................... 72

License and Trademark Information ..................................... 73

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

NETWORK AV RECEIVER

TX-L50

Instruction

Manual

2

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

Before Start

What's in the box

0

Connect speakers with

4

Ω to

8

Ω impedance.

0

The power cord must be connected only after all other cable connections are completed.

0 We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0 Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in

the future. Furthermore, available services may vary depending on your area of

residence.

0 Specifications and appearance are subject to change without prior notice.

0 We plan to provide support for the Dolby Atmos and DTS:X audio format through a

firmware update for this unit. Refer to our website for more information.

Main unit (1)

Remote controller (RC-934R) (1), batteries (AAA/R03) (2)

Speaker setup microphone (1)

Indoor FM antenna (1)

> Before Start >Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

3

E

N

Part Names

Front Panel

1. Í ON/STANDBY button: Turns the unit on or into standby mode.

2. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features

are enabled that continue to work when this unit is in standby, such as HDMI Standby

Through and Network Standby.

3. Display (ÄP6)

4. Remote control sensor

5. Volume dial: Allows you to adjust the volume.

6. USB port: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.

7. PHONES jack: Stereo headphones with a mini plug ( 3.5 mm) are connected.

8. INPUT button: Switches the input to be played. (BD/DVD / CBL/SAT / GAME / STRM

BOX / CD / TV / PHONO / FM / NET / USB / BLUETOOTH)

9. LISTENING MODE button: Allows you to select the listening mode. (ÄP28)

10.

TUNING43buttons: Select the frequency of FM radio stations.

  

    



4

> Before Start >Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

Rear Panel

1. TUNER FM 75 jack: Connect the supplied antenna.

2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled

device. The diagram shows the movable range for the wireless antenna. Do not try to

force it beyond this range otherwise you may break it.

3. AUDIO IN jacks: Input TV or AV component audio signals with an analog audio cable.

4. GND terminal: The ground wire of the turntable is connected.

5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals

with a digital optical cable or digital coaxial cable.

6. SETUP MIC jack: The supplied speaker setup microphone is connected.

7. Power cord

8. ETHERNET port: Connect to the network with an Ethernet cable.

9. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

10.

HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

11.

SPEAKERS terminals: Connect speakers or passive subwoofers with speaker cables.

12.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.

180°

90°



 







  









> Before Start >Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

5

E

N

Remote Controller

1. Í button: Turns the unit on or into standby mode.

2. Input selector buttons: Switches the input to be played.

3. Q (QUICK MENU) button: You can perform common settings on the TV screen. (ÄP46)

4. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

5. button: Displays the Setup menu.

(

Ä

P49)

6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.

7. button: Temporarily mutes audio. Press again to cancel muting.

8. Listening mode buttons: Allows you to select the listening mode. (ÄP28)

9. Play buttons: You can start play of the Music Server or USB.

10.

button: You can start repeat or random play of the Music Server or USB.

CLEAR button: Deletes all characters you have entered when entering text on the TV

screen.

11.

DIMMER button: You can adjust the brightness of the display in three steps. It cannot be

turned off completely.

12.

button: Switches the information on the display.

13.

button: Returns the display to the previous state during setting.

14.

MODE button: Switches tuning to an FM station between automatic tuning and manual

tuning.

15.

MEMORY button: Used to register FM radio stations.































30°

Approx.5 m

(16 ft.)

6

> Before Start >Part Names > Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

Display

1. Lights in the following conditions.

HDMI: HDMI signals are input and selected.

ARC: Audio signals from the ARC compatible TV are input and selected.

USB: When "USB" is selected with the input selector and the unit is connected by USB

and the USB device is selected. Flashes if the USB is not properly connected.

NET: When "NET" is selected with the input selector and the unit is connected to the

network. It will flash if the connection to the network is not correct.

DIGITAL: Digital signals are input and the digital input selector is selected.

2. Lights when operating the "NET" or "USB" input selector indicating remote controller

cursor operations are possible in screens showing list of tracks, for example.

3. Lights when headphones are connected.

4. Lights when operating the "NET" or "USB" input selector when tracks are played or

paused.

5. Lights according to the type of input digital audio signals and the listening mode.

6. Lights in the following conditions.

RDS: Receiving RDS broadcasting.

AUTO: When tuning mode is auto.

TUNED: Receiving FM radio.

FM STEREO: Receiving FM stereo.

SLEEP: Sleep timer has been set.

ASb: When Auto Standby function is enabled. (ÄP59)

7. Flashes when muting is on.

8. Displays various information of the input signals. Characters that cannot be displayed on

this unit are replaced with asterisks ( ).



Neo:6









 

7

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

Install

1. Connect the Speakers

1

2

R

L

1: 22e to 30e, 2: 120e

12

Front Speakers

3

Center Speaker

45

Surround Speakers

6

Subwoofer

Front speakers output front stereo sound and a center

speaker outputs center sound such as dialogs and vocals.

Surround speakers create back sound field. Powered

subwoofer reproduces bass sounds and creates rich sound

field.

The front speakers should be positioned at ear height, while

the surround speakers should be positioned just above ear

height. Center speaker should be set up facing the listening

position. Place the powered subwoofer towards the front.

Placing it between the center speaker and a front speaker

gives you a natural sound even when playing music.

8

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

a Speaker cable, b Subwoofer cable

1/2˝

(12 mm)

a

b

1

2

3

a

b

FRONT

R

SURROUND

R

SURROUND

L

CENTERFRONT

L

Powered

Subwoofer

9

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

Refer to the illustration to connect the speaker system.

Twist the wires of the speaker cable tightly before inserting

into the SPEAKERS terminals. Make correct connection

between the unit’s jacks and speaker’s jacks (i to i and j

to j) for each channel. If connection is wrong, a bass

sound may become poor due to reverse phase.

Either a powered subwoofer or passive subwoofer may be

connected. To connect a powered subwoofer, use a

subwoofer cable and connect to the SUBWOOFER PRE

OUT jack. To connect a passive subwoofer, connect to the

SPEAKERS terminals with speaker cables as shown below.

Make sure the exposed wires of the speakers do not stick

out of the speaker terminals when connecting. If the

exposed wires of the speakers touch the rear panel or the +

and – wires touch each other, the protection circuit will be

activated. (ÄP65)

Setup

0 Settings for the speaker configuration you have

connected need to be made in "1. AccuEQ Room

Calibration" (ÄP15) in Initial Setup.

10

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

2. Connect the TV

a HDMI cable, b Digital optical cable

a

b

DIGITAL

OPTICAL OUT

1

To ARC TV

For a TV that supports the ARC (Audio Return Channel)

(ÄP72) feature, use an HDMI cable and connect according

to illustration "a". Choose an HDMI IN jack on the TV that

supports ARC when connecting.

To Non-ARC TV

For a TV that does not support the ARC (Audio Return

Channel) feature, connect both the HDMI cable in illustration

"a" and the digital optical cable in "b".

Setup

0 Settings are required to use the ARC function. Select

"Yes" in "4. Audio Return Channel" (ÄP16) in the Initial

Setup.

0 Please refer to the TV’s operation manual for directions

on connections and setup for the TV.

11

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

3. Connect the HDMI AV Components

a HDMI cable

e.g. BD

a

HDMI OUT

1

BD/DVD

GAME

a

Cable/Satellite

set-top box

Streaming media

player

This is an example of connection with an AV component

that has an HDMI jack. With connection to an AV

component that conforms with the CEC (Consumer

Electronics Control) standard, you can use features such as

the HDMI CEC feature that links with the input selector, and

the HDMI Standby Through feature which allows you to

play video and audio from AV components on the TV even

when this unit is in standby mode. (ÄP72)

0 To play 4K or 1080p video, use the high speed HDMI

cable.

Setup

0 Settings are required to use the HDMI CEC and HDMI

Standby Through features. (ÄP56) Make settings after

all connections are complete.

0 To enjoy digital surround sound including Dolby Digital,

audio output should be set to "Bitstream output" on the

connected Blu-ray Disc player or other device.

12

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

4. Connect the Audio Components

a Digital coaxial cable, b Analog audio cable

CD

a

b

Turntable

Connecting a CD player

Use a digital coaxial cable to connect a CD player to the

DIGITAL IN COAXIAL jack.

Connecting a turntable

You can also connect a turntable that has an MM-type

cartridge to the PHONO jack.

0 If the turntable has a built-in audio equalizer, connect it to

an AUDIO IN jack other than the PHONO jack. Further, if

the turntable uses an MC type cartridge, install an audio

equalizer compatible with the MC type cartridge between

the unit and the turntable, then connect to any AUDIO IN

jack other than the PHONO jack.

If the turntable has a ground wire, connect it to the GND

terminal of this unit.

13

> Before Start > Part Names >Install > Initial Setup > Playback

Advanced Setup | Firmware Update | Others

E

N

5. Connect Other Cables

a FM indoor antenna, b Ethernet cable, c Power cord

b

c

a

1

3

2

Antenna Hookup

Connect the supplied FM indoor antenna to the TUNER FM

75 terminal. Move the FM indoor antenna around while

playing the radio to find the position with the best reception.

Network Hookup

Connect this unit to the network using wired LAN or Wi-Fi

(wireless LAN). You can enjoy network features such as

internet radio by connecting the unit to the network. If you

connect by wired LAN, connect with an Ethernet cable to the

ETHERNET port as shown in the illustration. To connect by

Wi-Fi, then after selecting "Wireless" in "3. Network

Connection" (ÄP16) in Initial Setup, select the desired

setting method and follow the onscreen instructions to

configure the connection.

Power Cord Hookup

Connect the power cord of this unit only after all other

connections are completed.

14

> Before Start > Part Names > Install > Initial Setup >Playback

Advanced Setup | Firmware Update | Others

E

N

Initial Setup

Initial Setup with Auto Start-up Wizard

1

3 4

2

TV's remote controller

Initial Setup starts automatically

1. Switch the input on the TV to that assigned to the unit.

2. Put batteries into the remote controller of this unit.

3. Press Í on the remote controller. When power is turn on

for the first time, an Initial Setup screen is automatically

displayed on the TV to allow you to make settings

required for start up.

4. Follow the on-screen instructions to select the item with

the cursors of the remote controller and press ENTER to

confirm your selection.

0 To return to the previous screen, press .

To redo Initial Setup: If you terminate the procedure on the

way or want to change a setting made during Initial Setup,

press on the remote controller, select "6. Miscellaneous"

- "Initial Setup" in the Setup menu and press ENTER. To

select the language displayed again, change "OSD

Language". (ÄP49)

Exit

Initial Setup

Language Select

English

Deutsch

Français

Español

Italiano

Nederlands

Svenska

Русский язык

15

> Before Start > Part Names > Install > Initial Setup >Playback

Advanced Setup | Firmware Update | Others

E

N

1. AccuEQ Room Calibration

Place the supplied speaker setup microphone in the

listening position, measure the test tones emitted by the

speakers, then the unit automatically sets the optimum

volume level for each speaker, the crossover frequencies,

and the distance from the listening position. This also

automatically adjusts the equalizers for the speakers and

enables correction of distortion caused by the acoustic

environment of the room.

0 Calibration takes between 3 to 12 minutes to be

completed. The speakers emit the test tone at high

volume during measurement, so be careful of your

surroundings. Keep the room as quiet as possible during

measurement.

0 If the power of this unit suddenly turns off, the wires in the

speaker cables may have touch the rear panel or other

wires and tripped the protection circuit. Twist the wires

again properly and make sure they do not stick out of the

speaker terminals when connecting.

1. Place the supplied speaker setup microphone in the

listening position, and connect to the SETUP MIC jack on

the main unit.

When putting the speaker setup microphone on a tripod,

refer to the illustration when putting it in place.

0 To cancel AccuEQ Room Calibration partway through,

disconnect the speaker setup microphone.

2. Select the connected speaker configuration.

The image on the screen changes as you choose the

number of channels in "Speaker Channels", so refer to it

when performing the settings. Also use this screen to

select whether you have connected a subwoofer.

0 If you have connected a subwoofer, check the power

and volume of the subwoofer. The low frequencies

played by the subwoofer may not be discernible, so

set its volume to at least halfway.

3. Test tones are emitted by the speakers, and firstly the

unit detects the speakers connected and the noise in the

environment.

4. After the results of the above measurements are

displayed, select "Next", press ENTER on the remote

controller, and the test tones are emitted again, and the

unit automatically makes settings such as the optimum

volume level and the crossover frequency.

5. When the measurement is completed, the measurement

result is displayed.

Press the cursors W/X on the remote controller to check

the settings. Press ENTER when "Save" is selected to

save the settings.

6. Select whether to enable or disable the equalizer function

that corrects for distortion caused by the acoustic

environment of the room.

If this is to be enabled, then normally you should select

"On (All Channels)", and to disable just the front

speakers you should select "On (Except Front Left /

Right)".

7. Disconnect the speaker setup microphone.You cannot

use any other menu options while it is connected.

2. Source Connection

Check that each input source is connected correctly. Follow

the guidance, select the input you want to confirm, start play

of the selected player, and confirm that the images appear

on the TV and that sound is played.

SETUP MIC

AccuEQ Room Calibration

Speaker Channels

Subwoofer

Select how many speakers you have.

< >

Yes

AccuEQ Room Calibration

Subwoofer

Front

Center

Surround

Review Crossover

: Yes

: 100Hz

Save

Cancel

AccuEQ Room Calibration

On (All Channels)

On (Except Front Left / Right)

Off

To enable equalizer for each speakers, select "On".

Please select "All Channels", if you have same speakers for all

channels. Please select "Except Front Left / Right", if front

speakers are larger than other speakers.

16

> Before Start > Part Names > Install > Initial Setup >Playback

Advanced Setup | Firmware Update | Others

E

N

3. Network Connection

Set up Wi-Fi connection with an access point such as a

wireless LAN router. There are the following two methods of

connecting by Wi-Fi:

"Scan Networks": Search for an access point from this

unit. Find out the SSID of the access point beforehand.

"Use iOS Device (iOS7 or later)": Share the iOS device's

Wi-Fi settings with this unit.

If you select "Scan Networks", there are a further two

choices of connection method. Check the following.

0 "Enter Password": Enter the password (or key) of the

access point to connect.

0 "Push Button": If the access point has an automatic

connection button, you can connect without entering a

password.

0 If the SSID of the access point is not displayed, then in

the screen listing the SSIDs, select "Other..." with the X

button on the remote controller and press ENTER, then

follow the on-screen instructions.

Keyboard input: To switch between upper and lower case,

select "A/a" on the screen and press ENTER. To select

whether to mask the password with " " or display it in plain

text, press MEMORY on the remote controller. Pressing

CLEAR will delete all the input characters.

Privacy policy: A confirmation screen asking you to agree

to the privacy policy is displayed during network setting.

Select "Yes" and press ENTER to indicate agreement.

4. Audio Return Channel

If you have connected a TV that supports ARC, select

"Yes". This unit's ARC setting turns on and you can listen to

the TV's audio through this unit.

0 If you select "Yes", the HDMI CEC function is enabled

and power consumption increases during standby.

Wi-Fi Setup

Ðáóó÷ïòä

When finished, select the "OK" key.

A/aAll Erase

OKA/a

a b cdefghi jklm

nopqr s t uvwxy z

1 2 34567890- ^\

, . /;:@[]

Hide/Show

17

> Before Start > Part Names > Install > Initial Setup >Playback

Advanced Setup | Firmware Update | Others

E

N

Playback

AV Component Playback

Basic operations

Play an AV component or TV connected to this unit with an

HDMI cable or other cable.

1. Switch the input on the TV to that assigned to the unit.

2. Press the input selector (a) on the remote controller with

the same name as the jack to which you connected the

player to switch the input.

For example, press BD/DVD to play the player connected

to the BD/DVD jack. Press TV to listen the TV's sound.

0 Note that when the CEC link function works, the input

switches automatically when you have connected a

CEC compliant TV and player to this unit using HDMI

connection.

3. Start play on the player.

4. Use VOL+/– (b) to adjust the volume.

a

b

18

> Before Start > Part Names > Install > Initial Setup >Playback

Advanced Setup | Firmware Update | Others

E

N

Internet Radio

Basic operations

When this unit is connected to a network, you can listen to

TuneIn or other preregistered Internet radio services.

Depending on the internet radio service, the user may need

to register from their computer first.

1. Switch the input on the TV to that assigned to the unit.

2. Press NET on the remote controller.

3. Follow the on-screen instructions, using the cursors to

select radio stations and programs, then press ENTER

(a) to play. Play starts when 100% is displayed for

buffering.

0 To return to the previous screen, press (b).

0 If you cannot select a network service, it will become

selectable when the network function is started.

Regarding the TuneIn Radio

To display the TuneIn Radio menu during play, press

ENTER (a) on the remote controller.

Add to My Presets Registers radio stations being

broadcast and programs in "My Presets". Once registered,

"My Presets" is displayed in the level under TuneIn Radio.

To play, select the program you like from "My Presets".

Remove from My Presets Removes a radio station or

program from "My Presets" in TuneIn Radio.

a

b

1

19

> Before Start > Part Names > Install > Initial Setup >Playback

Advanced Setup | Firmware Update | Others

E

N

Spotify

b

d

e

c

a

1

2

3

4

Basic operations

Spotify Connect play is possible by connecting this unit to

the same network as a smart phone or tablet. To enable

Spotify Connect, install the Spotify application on your

smartphone or tablet and create a Spotify premium account.

1. Connect the smartphone to the network that this unit is

connected to.

2. Click the Connect icon in the track play screen of the

Spotify app.

3. Select this unit.

4. This unit turns on automatically and the input selector

changes to NET and streaming of Spotify starts.

0 If "5. Hardware" - "Power Management" - "Network

Standby" is set to "Off" in the Setup menu, manually turn

the unit on and then press NET on the remote controller.

0 Refer to the following for Spotify settings:

www.spotify.com/connect/

0 The Spotify software is subject to third party licenses

found here:

www.spotify.com/connect/third-party-licenses

The following remote controller operations are also

possible.

(a) Pressed during play, this button changes the displayed

track information.

(b) This button plays the previous track.

(c) This button lets you start repeat or random playback.

Pressing this button repeatedly cycles through the

repeat modes.

(d) Pressed during play this button pauses playback.

Pressed while paused, and it restarts play.

(e) This button plays the next track.

Sidan laddas...

ONKYO TX-L50 Bruksanvisning

ONKYO TX-L50 Bruksanvisning

på andra språk

Relaterade papper

Andra dokument